sidekiq-statsd 0.1.1 → 0.1.2

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/rspec_groups_using_filter_class.feature

@@ -1,40 +0,0 @@
-@rspec
-Feature: Grouping on RSpec using a custom filter class
-
-  Next to passing a block or a string to define a group, you can also pass
-  a filter class. The filter class inherits from SimpleCov::Filter and
-  must implement the matches? method, which is used to determine whether
-  or not a file should be added to the group.
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      class CoverageFilter < SimpleCov::Filter
-        def matches?(source_file)
-          source_file.covered_percent < filter_argument
-        end
-      end
-      SimpleCov.start do
-        add_group 'By filter class', CoverageFilter.new(90)
-        add_group 'By string', 'project/meta_magic'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then I should see the groups:
-      | name             | coverage | files |
-      | All Files        | 90.74%   | 6     |
-      | By filter class  | 78.26%   | 2     |
-      | By string        | 100.0%   | 1     |
-      | Ungrouped        | 100.0%   | 3     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | spec/meta_magic_spec.rb                 | 100.0 %  |
-      | spec/some_class_spec.rb                 | 100.0 %  |
-

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/rspec_without_simplecov.feature

@@ -1,20 +0,0 @@
-@rspec
-Feature:
-
-  Running specs without simplecov configuration
-
-  Scenario: No config at all
-    When I successfully run `bundle exec rspec spec`
-    Then no coverage report should have been generated
-
-  Scenario: Configured, but not started
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.configure do
-        add_filter 'somefilter'
-      end
-      """
-
-    When I successfully run `bundle exec rspec spec`
-    Then no coverage report should have been generated

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/skipping_code_blocks_manually.feature

@@ -1,70 +0,0 @@
-@test_unit @nocov
-Feature:
-
-  When code is wrapped in :nocov: comment blocks, it does not count
-  against the coverage numbers.
-
-  Background:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start 'test_frameworks'
-      """
-
-  Scenario: Plain run with a nocov'd method
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-        #:nocov:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-        #:nocov:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 5 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |
-
-  Scenario: Number of spaces should not mix up nocov results
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-           #    :nocov:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-          #   :nocov:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 5 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/step_definitions/html_steps.rb

@@ -1,45 +0,0 @@
-module GroupHelpers
-  def available_groups
-    all('#content .file_list_container')
-  end
-
-  def available_source_files
-    all('.source_files .source_table')
-  end
-end
-World(GroupHelpers)
-
-
-Then /^I should see the groups:$/ do |table|
-  expected_groups = table.hashes
-  # Given group names should be the same number than those rendered in report
-  expected_groups.count.should == available_groups.count
-
-  # Verify each of the expected groups has a file list container and corresponding title and coverage number
-  # as well as the correct number of links to files.
-  expected_groups.each do |group|
-    with_scope "#content ##{group["name"].gsub(/[^a-z]/i, '')}.file_list_container" do
-      file_count_in_group = page.all('a.src_link').count
-      file_count_in_group.should == group["files"].to_i
-
-      with_scope "h2" do
-        page.should have_content(group["name"])
-        page.should have_content(group["coverage"])
-      end
-    end
-  end
-end
-
-Then /^I should see the source files:$/ do |table|
-  expected_files = table.hashes
-  expected_files.length.should == available_source_files.count
-
-  # Find all filenames and their coverage present in coverage report
-  files = available_source_files.map {|f| {"name" => f.find('h3').text, "coverage" => f.find('.header span').text} }
-
-  files.sort_by {|hsh| hsh["name"] }.should == expected_files.sort_by {|hsh| hsh["name"] }
-end
-
-Then /^there should be (\d+) skipped lines in the source files$/ do |expected_count|
-  all(".source_table ol li.skipped").count.should == expected_count.to_i
-end

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/step_definitions/simplecov_steps.rb

@@ -1,66 +0,0 @@
-# Just a shortcut to make framework setup more readable
-# The test project is using separate config files to avoid specifying all of
-# test/spec_helper in the features every time.
-Given /^SimpleCov for (.*) is configured with:$/ do |framework, config_body|
-  framework_dir = case framework
-    when /RSpec/i
-      "spec"
-    when /Test\/Unit/i
-      "test"
-    when /Cucumber/i
-      "features/support"
-    else
-      raise ArgumentError, "Could not identify test framework #{framework}!"
-  end
-
-  steps %Q{
-    Given a file named "#{framework_dir}/simplecov_config.rb" with:
-      """
-      #{config_body}
-      """
-  }
-end
-
-When /^I open the coverage report generated with `([^`]+)`$/ do |command|
-  steps %Q{
-    When I successfully run `#{command}`
-    Then a coverage report should have been generated
-    When I open the coverage report
-  }
-end
-
-Then /^a coverage report should have been generated(?: in "([^"]*)")?$/ do |coverage_dir|
-  coverage_dir ||= 'coverage'
-  steps %Q{
-    Then the output should contain "Coverage report generated"
-    And a directory named "#{coverage_dir}" should exist
-    And the following files should exist:
-      | #{coverage_dir}/index.html      |
-      | #{coverage_dir}/.resultset.json |
-  }
-end
-
-Then /^no coverage report should have been generated(?: in "([^"]*)")?$/ do |coverage_dir|
-  coverage_dir ||= 'coverage'
-  steps %Q{
-    Then the output should not contain "Coverage report generated"
-    And a directory named "#{coverage_dir}" should not exist
-    And the following files should not exist:
-      | #{coverage_dir}/index.html      |
-      | #{coverage_dir}/.resultset.json |
-  }
-end
-
-Then /^the report should be based upon:$/ do |table|
-  frameworks = table.raw.flatten
-  steps %Q{
-    Then the output should contain "Coverage report generated for #{frameworks.join(", ")}"
-    And I should see "using #{frameworks.join(", ")}" within "#footer"
-  }
-end
-
-# This is neccessary to ensure timing-dependant tests like the merge timeout
-# do not fail on powerful machines.
-When /^I wait for (\d+) seconds$/ do |seconds|
-  sleep seconds.to_i
-end

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/step_definitions/transformers.rb

@@ -1,13 +0,0 @@
-#
-# Enforce the alphabetical execution of specs because rspec 2+ executes them
-# randomly with `rspec spec` while we need them in an accurate order for coverage
-# reports that include the spec files.
-#
-# This is due to the fact that coverage will not include the first loaded spec/test file.
-# To get predictable coverage results, we need to know which one that is...
-#
-Transform "bundle exec rspec spec" do |t|
-  files = nil # Avoid shadowing
-  in_current_dir { files = Dir['spec/**/*_spec.rb'] }
-  "bundle exec rspec #{files.sort.join(' ')}"
-end

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/step_definitions/web_steps.rb

@@ -1,64 +0,0 @@
-module WithinHelpers
-  def with_scope(locator)
-    locator ? within(locator) { yield } : yield
-  end
-end
-World(WithinHelpers)
-
-When /^I open the coverage report$/ do
-  visit '/'
-end
-
-Given /^(?:|I )am on (.+)$/ do |path|
-  visit path
-end
-
-When /^(?:|I )go to (.+)$/ do |path|
-  visit path
-end
-
-When /^(?:|I )press "([^"]*)"(?: within "([^"]*)")?$/ do |button, selector|
-  with_scope(selector) do
-    click_button(button)
-  end
-end
-
-When /^(?:|I )follow "([^"]*)"(?: within "([^"]*)")?$/ do |link, selector|
-  with_scope(selector) do
-    click_link(link)
-  end
-end
-
-Then /^(?:|I )should see "([^"]*)"(?: within "([^"]*)")?$/ do |text, selector|
-  with_scope(selector) do
-    page.should have_content(text)
-  end
-end
-
-Then /^(?:|I )should see \/([^\/]*)\/(?: within "([^"]*)")?$/ do |regexp, selector|
-  regexp = Regexp.new(regexp)
-  with_scope(selector) do
-    page.should have_xpath('//*', :text => regexp)
-  end
-end
-
-Then /^(?:|I )should not see "([^"]*)"(?: within "([^"]*)")?$/ do |text, selector|
-  with_scope(selector) do
-    page.should have_no_content(text)
-  end
-end
-
-Then /^(?:|I )should not see \/([^\/]*)\/(?: within "([^"]*)")?$/ do |regexp, selector|
-  regexp = Regexp.new(regexp)
-  with_scope(selector) do
-    page.should have_no_xpath('//*', :text => regexp)
-  end
-end
-
-Then /^show me the page$/ do
-  save_and_open_page
-end
-
-Then /^print the page$/ do
-  puts page.body
-end

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/support/env.rb

@@ -1,26 +0,0 @@
-unless RUBY_VERSION =~ /1\.9/
-  $stderr.puts "Sorry, Cucumber features are only meant to run on Ruby 1.9 for now :("
-  exit 0
-end
-
-require 'bundler'
-Bundler.setup
-require 'aruba/cucumber'
-require 'capybara/cucumber'
-
-# Fake rack app for capybara that just returns the latest coverage report from aruba temp project dir
-Capybara.app = lambda {|env|
-  [200, {'Content-Type' => 'text/html'},
-    [File.read(File.join(File.dirname(__FILE__), '../../tmp/aruba/project', 'coverage/index.html'))]]
-}
-
-Before do
-  @aruba_timeout_seconds = 20
-  this_dir = File.dirname(__FILE__)
-  # Clean up and create blank state for fake project
-  in_current_dir do
-    FileUtils.rm_rf 'project'
-    FileUtils.cp_r File.join(this_dir, '../../test/faked_project/'), 'project'
-  end
-  step 'I cd to "project"'
-end

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/test_unit_basic.feature

@@ -1,34 +0,0 @@
-@test_unit
-Feature:
-
-  Simply adding the basic simplecov lines to a project should get
-  the user a coverage report after running `rake test`
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 91.38%   | 6     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | test/meta_magic_test.rb                 | 100.0 %  |
-      | test/some_class_test.rb                 | 100.0 %  |
-
-      # Note: faked_test.rb is not appearing here since that's the first unit test file
-      # loaded by Rake, and only there test_helper is required, which then loads simplecov
-      # and triggers tracking of all other loaded files! Solution for this would be to
-      # configure simplecov in this first test instead of test_helper.
-
-    And the report should be based upon:
-      | Unit Tests |

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/test_unit_groups_and_filters_basic.feature

@@ -1,29 +0,0 @@
-@test_unit
-Feature:
-
-  Defining some groups and filters should give a corresponding
-  coverage report that respects those settings after running tests
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'Libs', 'lib/faked_project/'
-        add_filter '/test/'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 88.1%    | 4     |
-      | Libs      | 86.11%   | 3     |
-      | Ungrouped | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         |  80.0 %  |
-      | lib/faked_project/framework_specific.rb |  75.0 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/test_unit_groups_and_filters_complex.feature

@@ -1,35 +0,0 @@
-@test_unit
-Feature: Sophisticated grouping and filtering on Test/Unit
-
-  Defining groups and filters can be done by passing blocks or strings.
-  Blocks get each SimpleCov::SourceFile instance passed an can use arbitrary
-  and potentially weird conditions to remove files from the report or add them
-  to specific groups.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'By block' do |src_file|
-          src_file.filename =~ /MaGiC/i
-        end
-        add_group 'By string', 'project/meta_magic'
-
-        add_filter 'faked_project.rb'
-        # Remove all files that include "describe" in their source
-        add_filter {|src_file| src_file.lines.any? {|line| line.src =~ /TestCase/ } }
-        add_filter {|src_file| src_file.covered_percent < 100 }
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 100.0%   | 1     |
-      | By block  | 100.0%   | 1     |
-      | By string | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                            | coverage |
-      | lib/faked_project/meta_magic.rb | 100.0 %  |

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/test_unit_groups_using_filter_class.feature

@@ -1,40 +0,0 @@
-@test_unit
-Feature: Grouping on Test/Unit using a custom filter class
-
-  Next to passing a block or a string to define a group, you can also pass
-  a filter class. The filter class inherits from SimpleCov::Filter and
-  must implement the matches? method, which is used to determine whether
-  or not a file should be added to the group.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      class CoverageFilter < SimpleCov::Filter
-        def matches?(source_file)
-          source_file.covered_percent < filter_argument
-        end
-      end
-      SimpleCov.start do
-        add_group 'By filter class', CoverageFilter.new(90)
-        add_group 'By string', 'project/meta_magic'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name             | coverage | files |
-      | All Files        | 91.38%   | 6     |
-      | By filter class  | 78.26%   | 2     |
-      | By string        | 100.0%   | 1     |
-      | Ungrouped        | 100.0%   | 3     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | test/meta_magic_test.rb                 | 100.0 %  |
-      | test/some_class_test.rb                 | 100.0 %  |
-

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/test_unit_without_simplecov.feature

@@ -1,20 +0,0 @@
-@test_unit
-Feature:
-
-  Running unit tests without simplecov configuration
-
-  Scenario: No config at all
-    When I successfully run `bundle exec rake test`
-    Then no coverage report should have been generated
-
-  Scenario: Configured, but not started
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.configure do
-        add_filter 'somefilter'
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then no coverage report should have been generated

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/features/unicode_compatiblity.feature

@@ -1,67 +0,0 @@
-@test_unit @unicode
-Feature:
-
-  Files with unicode in their source should be no problem at all for
-  generating a proper coverage report.
-
-  Background:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start 'test_frameworks'
-      """
-
-  Scenario: Snowman inside method string
-    Given a file named "lib/faked_project/unicode.rb" with:
-      """
-      # encoding: UTF-8
-      class SourceCodeWithUnicode
-        def self.yell!
-          puts "☃"
-        end
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 86.67%   | 5     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/unicode.rb            | 66.67 %  |
-
-    And the report should be based upon:
-      | Unit Tests |
-
-  Scenario: Author name in comment
-    Given a file named "lib/faked_project/unicode.rb" with:
-      """
-      # encoding: UTF-8
-      # author:  Javiér Hernández
-      class SomeClassWrittenByAForeigner
-        def self.yell!
-          foo
-        end
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 86.67%   | 5     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/unicode.rb            | 66.67 %  |
-
-    And the report should be based upon:
-      | Unit Tests |

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/gemfiles/multi_json-legacy.gemfile

@@ -1,7 +0,0 @@
-# This file was generated by Appraisal
-
-source "http://rubygems.org"
-
-gem "multi_json", "~> 1.0.0"
-
-gemspec :path=>"../"

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/gemfiles/multi_json-new.gemfile

@@ -1,7 +0,0 @@
-# This file was generated by Appraisal
-
-source "http://rubygems.org"
-
-gem "multi_json", ">= 1.3.4"
-
-gemspec :path=>"../"

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/lib/simplecov/adapters.rb

@@ -1,29 +0,0 @@
-#
-# Adapters are glorified SimpleCov configuration procs that can be easily
-# loaded using SimpleCov.start :rails and defined using
-#   SimpleCov.adapters.define :foo do
-#     # SimpleCov configuration here, same as in  SimpleCov.configure
-#   end
-#
-class SimpleCov::Adapters < Hash
-  #
-  # Define a SimpleCov adapter:
-  #   SimpleCov.adapters.define 'rails' do
-  #     # Same as SimpleCov.configure do .. here
-  #   end
-  #
-  def define(name, &blk)
-    name = name.to_sym
-    raise "SimpleCov Adapter '#{name}' is already defined" unless self[name].nil?
-    self[name] = blk
-  end
-
-  #
-  # Applies the adapter of given name on SimpleCov.configure
-  #
-  def load(name)
-    name = name.to_sym
-    raise "Could not find SimpleCov Adapter called '#{name}'" unless has_key?(name)
-    SimpleCov.configure(&self[name])
-  end
-end

data/vendor/ruby/1.9.1/gems/simplecov-0.7.1/lib/simplecov/command_guesser.rb

@@ -1,49 +0,0 @@
-#
-# Helper that tries to find out what test suite is running (for SimpleCov.command_name)
-#
-module SimpleCov::CommandGuesser
-  class << self
-    # Storage for the original command line call that invoked the test suite.
-    # This has got to be stored as early as possible because i.e. rake and test/unit 2
-    # have a habit of tampering with ARGV, which makes i.e. the automatic distinction
-    # between rails unit/functional/integration tests impossible without this cached
-    # item.
-    attr_accessor :original_run_command
-    
-    def guess
-      from_command_line_options || from_defined_constants
-    end
-    
-    private
-    
-    def from_command_line_options
-      case original_run_command
-        when /#{'test/functional/'}/
-          "Functional Tests"
-        when /#{'test/integration/'}/
-          "Integration Tests"
-        when /#{'test/'}/
-          "Unit Tests"
-        when /cucumber/, /features/
-          "Cucumber Features"
-        when /spec/
-          "RSpec"
-        else
-          nil
-      end
-    end
-  
-    def from_defined_constants
-      # If the command regexps fail, let's try checking defined constants.
-      if defined?(RSpec)
-        "RSpec"
-      elsif defined?(Test::Unit)
-        "Unit Tests"
-      else
-        # TODO: Provide link to docs/wiki article
-        warn "SimpleCov failed to recognize the test framework and/or suite used. Please specify manually using SimpleCov.command_name 'Unit Tests'."
-        'Unknown Test Framework'
-      end
-    end
-  end
-end