sidekiq-statsd 0.1.0

data/vendor/ruby/1.9.1/gems/ffi-1.8.1/ext/ffi_c/libffi/build-ios.sh

@@ -0,0 +1,67 @@
+#!/bin/sh
+
+PLATFORM_IOS=/Developer/Platforms/iPhoneOS.platform/
+PLATFORM_IOS_SIM=/Developer/Platforms/iPhoneSimulator.platform/
+SDK_IOS_VERSION="4.2"
+MIN_IOS_VERSION="3.0"
+OUTPUT_DIR="universal-ios"
+
+build_target () {
+    local platform=$1
+    local sdk=$2
+    local arch=$3
+    local triple=$4
+    local builddir=$5
+
+    mkdir -p "${builddir}"
+    pushd "${builddir}"
+    export CC="${platform}"/Developer/usr/bin/gcc-4.2
+    export CFLAGS="-arch ${arch} -isysroot ${sdk} -miphoneos-version-min=${MIN_IOS_VERSION}"
+    ../configure --host=${triple} && make
+    popd
+}
+
+# Build all targets
+build_target "${PLATFORM_IOS}" "${PLATFORM_IOS}/Developer/SDKs/iPhoneOS${SDK_IOS_VERSION}.sdk/" armv6 arm-apple-darwin10 armv6-ios
+build_target "${PLATFORM_IOS}" "${PLATFORM_IOS}/Developer/SDKs/iPhoneOS${SDK_IOS_VERSION}.sdk/" armv7 arm-apple-darwin10 armv7-ios
+build_target "${PLATFORM_IOS_SIM}" "${PLATFORM_IOS_SIM}/Developer/SDKs/iPhoneSimulator${SDK_IOS_VERSION}.sdk/" i386 i386-apple-darwin10 i386-ios-sim
+
+# Create universal output directories
+mkdir -p "${OUTPUT_DIR}"
+mkdir -p "${OUTPUT_DIR}/include"
+mkdir -p "${OUTPUT_DIR}/include/armv6"
+mkdir -p "${OUTPUT_DIR}/include/armv7"
+mkdir -p "${OUTPUT_DIR}/include/i386"
+
+# Create the universal binary
+lipo -create armv6-ios/.libs/libffi.a armv7-ios/.libs/libffi.a i386-ios-sim/.libs/libffi.a -output "${OUTPUT_DIR}/libffi.a"
+
+# Copy in the headers
+copy_headers () {
+    local src=$1
+    local dest=$2
+
+    # Fix non-relative header reference
+    sed 's/<ffitarget.h>/"ffitarget.h"/' < "${src}/include/ffi.h" > "${dest}/ffi.h"
+    cp "${src}/include/ffitarget.h" "${dest}"
+}
+
+copy_headers armv6-ios "${OUTPUT_DIR}/include/armv6"
+copy_headers armv7-ios "${OUTPUT_DIR}/include/armv7"
+copy_headers i386-ios-sim "${OUTPUT_DIR}/include/i386"
+
+# Create top-level header
+(
+cat << EOF
+#ifdef __arm__
+  #include <arm/arch.h>
+  #ifdef _ARM_ARCH_6
+    #include "include/armv6/ffi.h"
+  #elif _ARM_ARCH_7
+    #include "include/armv7/ffi.h"
+  #endif
+#elif defined(__i386__)
+  #include "include/i386/ffi.h"
+#endif
+EOF
+) > "${OUTPUT_DIR}/ffi.h"

data/vendor/ruby/1.9.1/gems/ffi-1.8.1/ext/ffi_c/libffi/compile

@@ -0,0 +1,143 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2009-10-06.20; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009  Free Software
+# Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as `compile cc -o foo foo.c'.
+	# So we strip `-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no `-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # `.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

data/vendor/ruby/1.9.1/gems/ffi-1.8.1/ext/ffi_c/libffi/config.guess

@@ -0,0 +1,1501 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   Free Software Foundation, Inc.
+
+timestamp='2009-11-20'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[456])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	LIBC=gnu
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+        exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    i386)
+		eval $set_cc_for_build
+		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		      grep IS_64BIT_ARCH >/dev/null
+		  then
+		      UNAME_PROCESSOR="x86_64"
+		  fi
+		fi ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End: