shell-spinner 1.0.1 → 1.0.2

data/config/environments/test.rb

@@ -0,0 +1,39 @@
+Wisemuv::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Configure static asset server for tests with Cache-Control for performance
+  config.serve_static_assets = true
+  config.static_cache_control = "public, max-age=3600"
+
+  # Log error messages when you accidentally call methods on nil
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment
+  config.action_controller.allow_forgery_protection    = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+  config.domain = 'wisemuvdev.com'
+  config.action_mailer.default_url_options = { :host => "#{config.domain}:3000" }
+
+  # Raise exception on mass assignment protection for Active Record models
+  config.active_record.mass_assignment_sanitizer = :strict
+
+  # Print deprecation notices to the stderr
+  config.active_support.deprecation = :stderr
+end

data/config/exceptional.yml

@@ -0,0 +1,7 @@
+development:
+  enabled: false
+  api-key: a745686d8219215a9c258103cc80e4bcf4f4ca20
+
+production:
+  enabled: true
+  api-key: a745686d8219215a9c258103cc80e4bcf4f4ca20

data/config/initializers/active_admin.rb

@@ -0,0 +1,129 @@
+ActiveAdmin.setup do |config|
+
+  # == Site Title
+  #
+  # Set the title that is displayed on the main layout
+  # for each of the active admin pages.
+  #
+  config.site_title = "Wisemuv"
+
+  # Set the link url for the title. For example, to take
+  # users to your main site. Defaults to no link.
+  #
+  config.site_title_link = "/"
+
+  # Set an optional image to be displayed for the header
+  # instead of a string (overrides :site_title)
+  #
+  # Note: Recommended image height is 21px to properly fit in the header
+  #
+  # config.site_title_image = "/images/logo.png"
+
+  # == Default Namespace
+  #
+  # Set the default namespace each administration resource
+  # will be added to.
+  #
+  # eg:
+  #   config.default_namespace = :hello_world
+  #
+  # This will create resources in the HelloWorld module and
+  # will namespace routes to /hello_world/*
+  #
+  # To set no namespace by default, use:
+  #   config.default_namespace = false
+  #
+  # Default:
+  # config.default_namespace = :admin
+  #
+  # You can customize the settings for each namespace by using
+  # a namespace block. For example, to change the site title
+  # within a namespace:
+  #
+  #   config.namespace :admin do |admin|
+  #     admin.site_title = "Custom Admin Title"
+  #   end
+  #
+  # This will ONLY change the title for the admin section. Other
+  # namespaces will continue to use the main "site_title" configuration.
+
+  # == User Authentication
+  #
+  # Active Admin will automatically call an authentication
+  # method in a before filter of all controller actions to
+  # ensure that there is a currently logged in admin user.
+  #
+  # This setting changes the method which Active Admin calls
+  # within the controller.
+  config.authentication_method = :authenticate_admin_user!
+
+
+  # == Current User
+  #
+  # Active Admin will associate actions with the current
+  # user performing them.
+  #
+  # This setting changes the method which Active Admin calls
+  # to return the currently logged in user.
+  config.current_user_method = :current_user
+
+
+  # == Logging Out
+  #
+  # Active Admin displays a logout link on each screen. These
+  # settings configure the location and method used for the link.
+  #
+  # This setting changes the path where the link points to. If it's
+  # a string, the strings is used as the path. If it's a Symbol, we
+  # will call the method to return the path.
+  #
+  # Default:
+  config.logout_link_path = :sign_out_path
+
+  # This setting changes the http method used when rendering the
+  # link. For example :get, :delete, :put, etc..
+  #
+  # Default:
+  # config.logout_link_method = :get
+
+
+  # == Admin Comments
+  #
+  # Admin comments allow you to add comments to any model for admin use.
+  # Admin comments are enabled by default.
+  #
+  # Default:
+  # config.allow_comments = true
+  #
+  # You can turn them on and off for any given namespace by using a
+  # namespace config block.
+  #
+  # Eg:
+  #   config.namespace :without_comments do |without_comments|
+  #     without_comments.allow_comments = false
+  #   end
+
+
+  # == Controller Filters
+  #
+  # You can add before, after and around filters to all of your
+  # Active Admin resources from here.
+  #
+  # config.before_filter :do_something_awesome
+
+
+  # == Register Stylesheets & Javascripts
+  #
+  # We recommend using the built in Active Admin layout and loading
+  # up your own stylesheets / javascripts to customize the look
+  # and feel.
+  #
+  # To load a stylesheet:
+  #   config.register_stylesheet 'my_stylesheet.css'
+  #
+  # You can provide an options hash for more control, which is passed along to stylesheet_link_tag():
+  #   config.register_stylesheet 'my_print_stylesheet.css', :media => :print
+  #
+  # To load a javascript file:
+  #   config.register_javascript 'my_javascript.js'
+end

data/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/config/initializers/contacts_monkey_patch.rb

@@ -0,0 +1,8 @@
+module Contacts
+  class WindowsLive
+    def initialize config
+      @wll = WindowsLiveLogin.new config['appid'], config['secret'], config['security_algorithm'],
+        nil, config['policy_url'], config['return_url']
+    end
+  end
+end

data/config/initializers/core_extensions.rb

@@ -0,0 +1 @@
+require 'core_extensions/object'

data/config/initializers/delayed_job_config.rb

@@ -0,0 +1,6 @@
+Delayed::Worker.destroy_failed_jobs = false
+Delayed::Worker.sleep_delay = 60
+Delayed::Worker.max_attempts = 3
+Delayed::Worker.max_run_time = 5.minutes
+Delayed::Worker.read_ahead = 10
+Delayed::Worker.delay_jobs = !Rails.env.test?

data/config/initializers/devise.rb

@@ -0,0 +1,236 @@
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
+  config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:token]` will
+  # enable it only for token authentication.
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. "Application" by default.
+  # config.http_authentication_realm = "Application"
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # :http_auth and :token_auth by adding those symbols to the array below.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing :skip => :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments.
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = "df3a6fba7e6dbdbb569c51b10f4bd0e73717b8830104b564b24416dbaf7e85d41266ce398c25db637d20bf72398d46752a1ed045de500a4f8462af7dd598e6fe"
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming his account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming his account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming his account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed new email is stored in
+  # unconfirmed email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # :secure => true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 6..128.
+  # config.password_length = 6..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # an one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  # config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper)
+  # config.encryptor = :sha512
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+  config.scoped_views = true
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Configure sign_out behavior.
+  # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
+  # The default is true, which means any logout action will sign out all active scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ["*/*", :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
+  require 'omniauth-facebook'
+  require 'omniauth-twitter'
+  require 'omniauth-google-oauth2'
+  require 'omniauth-linkedin'
+  require 'omniauth-yahoo'
+  require 'omniauth-windowslive'
+
+  begin
+    omniauth_config = SocialProvidersConfig.read
+  rescue
+    puts "Omniauth config wasn't found, it has been looked for at #{SocialProvidersConfig.config_path}"
+  end
+
+  config.omniauth :facebook, omniauth_config['facebook']['key'], omniauth_config['facebook']['secret'], :scope => 'email,offline_access'
+  config.omniauth :twitter, omniauth_config['twitter']['key'], omniauth_config['twitter']['secret']
+  config.omniauth :google_oauth2, omniauth_config['google']['key'], omniauth_config['google']['secret'], :scope => 'userinfo.email,userinfo.profile'
+  config.omniauth :linkedin, omniauth_config['linkedin']['key'], omniauth_config['linkedin']['secret']
+  config.omniauth :yahoo, omniauth_config['yahoo']['key'], omniauth_config['yahoo']['secret']
+  config.omniauth :windowslive, omniauth_config['windowslive']['key'], omniauth_config['windowslive']['secret'], :scope => 'wl.basic'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
+  # end
+end

data/config/initializers/formtastic.rb

@@ -0,0 +1 @@
+Formtastic::FormBuilder.i18n_lookups_by_default = true

data/config/initializers/generators.rb

@@ -0,0 +1,2 @@
+Rails.application.config.generators do |g|
+end