seven-zip 1.4.2 → 1.7.0.rc1

data/ext/p7zip/{DOCS → DOC}/copying.txt

@@ -1,8 +1,8 @@
-      GNU LESSER GENERAL PUBLIC LICENSE
-           Version 2.1, February 1999
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
 
  Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -10,7 +10,7 @@
  as the successor of the GNU Library Public License, version 2, hence
  the version number 2.1.]
 
-          Preamble
+                            Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -112,7 +112,7 @@ modification follow.  Pay close attention to the difference between a
 former contains code derived from the library, whereas the latter must
 be combined with the library in order to run.
 
-      GNU LESSER GENERAL PUBLIC LICENSE
+                  GNU LESSER GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License Agreement applies to any software library or other
@@ -146,7 +146,7 @@ such a program is covered only if its contents constitute a work based
 on the Library (independent of the use of the Library in a tool for
 writing it).  Whether that is true depends on what the Library does
 and what the program that uses the Library does.
-  
+
   1. You may copy and distribute verbatim copies of the Library's
 complete source code as you receive it, in any medium, provided that
 you conspicuously and appropriately publish on each copy an
@@ -432,7 +432,7 @@ decision will be guided by the two goals of preserving the free status
 of all derivatives of our free software and of promoting the sharing
 and reuse of software generally.
 
-          NO WARRANTY
+                            NO WARRANTY
 
   15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
 WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
@@ -455,7 +455,7 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
 SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
 DAMAGES.
 
-         END OF TERMS AND CONDITIONS
+                     END OF TERMS AND CONDITIONS
 
            How to Apply These Terms to Your New Libraries
 
@@ -485,7 +485,7 @@ convey the exclusion of warranty; and each file should have at least the
 
     You should have received a copy of the GNU Lesser General Public
     License along with this library; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -500,5 +500,3 @@ necessary.  Here is a sample; alter the names:
   Ty Coon, President of Vice
 
 That's all there is to it!
-
-

data/ext/p7zip/DOC/lzma.txt

@@ -0,0 +1,328 @@
+LZMA compression
+----------------
+Version: 9.35
+
+This file describes LZMA encoding and decoding functions written in C language.
+
+LZMA is an improved version of famous LZ77 compression algorithm. 
+It was improved in way of maximum increasing of compression ratio,
+keeping high decompression speed and low memory requirements for 
+decompressing.
+
+Note: you can read also LZMA Specification (lzma-specification.txt from LZMA SDK)
+
+Also you can look source code for LZMA encoding and decoding:
+  C/Util/Lzma/LzmaUtil.c
+
+
+LZMA compressed file format
+---------------------------
+Offset Size Description
+  0     1   Special LZMA properties (lc,lp, pb in encoded form)
+  1     4   Dictionary size (little endian)
+  5     8   Uncompressed size (little endian). -1 means unknown size
+ 13         Compressed data
+
+
+
+ANSI-C LZMA Decoder
+~~~~~~~~~~~~~~~~~~~
+
+Please note that interfaces for ANSI-C code were changed in LZMA SDK 4.58.
+If you want to use old interfaces you can download previous version of LZMA SDK
+from sourceforge.net site.
+
+To use ANSI-C LZMA Decoder you need the following files:
+1) LzmaDec.h + LzmaDec.c + Types.h
+
+Look example code:
+  C/Util/Lzma/LzmaUtil.c
+
+
+Memory requirements for LZMA decoding
+-------------------------------------
+
+Stack usage of LZMA decoding function for local variables is not 
+larger than 200-400 bytes.
+
+LZMA Decoder uses dictionary buffer and internal state structure.
+Internal state structure consumes
+  state_size = (4 + (1.5 << (lc + lp))) KB
+by default (lc=3, lp=0), state_size = 16 KB.
+
+
+How To decompress data
+----------------------
+
+LZMA Decoder (ANSI-C version) now supports 2 interfaces:
+1) Single-call Decompressing
+2) Multi-call State Decompressing (zlib-like interface)
+
+You must use external allocator:
+Example:
+void *SzAlloc(void *p, size_t size) { p = p; return malloc(size); }
+void SzFree(void *p, void *address) { p = p; free(address); }
+ISzAlloc alloc = { SzAlloc, SzFree };
+
+You can use p = p; operator to disable compiler warnings.
+
+
+Single-call Decompressing
+-------------------------
+When to use: RAM->RAM decompressing
+Compile files: LzmaDec.h + LzmaDec.c + Types.h
+Compile defines: no defines
+Memory Requirements:
+  - Input buffer: compressed size
+  - Output buffer: uncompressed size
+  - LZMA Internal Structures: state_size (16 KB for default settings) 
+
+Interface:
+  int LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+      const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, 
+      ELzmaStatus *status, ISzAlloc *alloc);
+  In: 
+    dest     - output data
+    destLen  - output data size
+    src      - input data
+    srcLen   - input data size
+    propData - LZMA properties  (5 bytes)
+    propSize - size of propData buffer (5 bytes)
+    finishMode - It has meaning only if the decoding reaches output limit (*destLen).
+         LZMA_FINISH_ANY - Decode just destLen bytes.
+         LZMA_FINISH_END - Stream must be finished after (*destLen).
+                           You can use LZMA_FINISH_END, when you know that 
+                           current output buffer covers last bytes of stream. 
+    alloc    - Memory allocator.
+
+  Out: 
+    destLen  - processed output size 
+    srcLen   - processed input size 
+
+  Output:
+    SZ_OK
+      status:
+        LZMA_STATUS_FINISHED_WITH_MARK
+        LZMA_STATUS_NOT_FINISHED 
+        LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+    SZ_ERROR_DATA - Data error
+    SZ_ERROR_MEM  - Memory allocation error
+    SZ_ERROR_UNSUPPORTED - Unsupported properties
+    SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
+
+  If LZMA decoder sees end_marker before reaching output limit, it returns OK result,
+  and output value of destLen will be less than output buffer size limit.
+
+  You can use multiple checks to test data integrity after full decompression:
+    1) Check Result and "status" variable.
+    2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+    3) Check that output(srcLen) = compressedSize, if you know real compressedSize. 
+       You must use correct finish mode in that case. */ 
+
+
+Multi-call State Decompressing (zlib-like interface)
+----------------------------------------------------
+
+When to use: file->file decompressing 
+Compile files: LzmaDec.h + LzmaDec.c + Types.h
+
+Memory Requirements:
+ - Buffer for input stream: any size (for example, 16 KB)
+ - Buffer for output stream: any size (for example, 16 KB)
+ - LZMA Internal Structures: state_size (16 KB for default settings) 
+ - LZMA dictionary (dictionary size is encoded in LZMA properties header)
+
+1) read LZMA properties (5 bytes) and uncompressed size (8 bytes, little-endian) to header:
+   unsigned char header[LZMA_PROPS_SIZE + 8];
+   ReadFile(inFile, header, sizeof(header)
+
+2) Allocate CLzmaDec structures (state + dictionary) using LZMA properties
+
+  CLzmaDec state;
+  LzmaDec_Constr(&state);
+  res = LzmaDec_Allocate(&state, header, LZMA_PROPS_SIZE, &g_Alloc);
+  if (res != SZ_OK)
+    return res;
+
+3) Init LzmaDec structure before any new LZMA stream. And call LzmaDec_DecodeToBuf in loop
+
+  LzmaDec_Init(&state);
+  for (;;)
+  {
+    ... 
+    int res = LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, 
+        const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode);
+    ...
+  }
+
+
+4) Free all allocated structures
+  LzmaDec_Free(&state, &g_Alloc);
+
+Look example code:
+  C/Util/Lzma/LzmaUtil.c
+
+
+How To compress data
+--------------------
+
+Compile files: 
+  Types.h
+  Threads.h	
+  LzmaEnc.h
+  LzmaEnc.c
+  LzFind.h
+  LzFind.c
+  LzFindMt.h
+  LzFindMt.c
+  LzHash.h
+
+Memory Requirements:
+  - (dictSize * 11.5 + 6 MB) + state_size
+
+Lzma Encoder can use two memory allocators:
+1) alloc - for small arrays.
+2) allocBig - for big arrays.
+
+For example, you can use Large RAM Pages (2 MB) in allocBig allocator for 
+better compression speed. Note that Windows has bad implementation for 
+Large RAM Pages. 
+It's OK to use same allocator for alloc and allocBig.
+
+
+Single-call Compression with callbacks
+--------------------------------------
+
+Look example code:
+  C/Util/Lzma/LzmaUtil.c
+
+When to use: file->file compressing 
+
+1) you must implement callback structures for interfaces:
+ISeqInStream
+ISeqOutStream
+ICompressProgress
+ISzAlloc
+
+static void *SzAlloc(void *p, size_t size) { p = p; return MyAlloc(size); }
+static void SzFree(void *p, void *address) {  p = p; MyFree(address); }
+static ISzAlloc g_Alloc = { SzAlloc, SzFree };
+
+  CFileSeqInStream inStream;
+  CFileSeqOutStream outStream;
+
+  inStream.funcTable.Read = MyRead;
+  inStream.file = inFile;
+  outStream.funcTable.Write = MyWrite;
+  outStream.file = outFile;
+
+
+2) Create CLzmaEncHandle object;
+
+  CLzmaEncHandle enc;
+
+  enc = LzmaEnc_Create(&g_Alloc);
+  if (enc == 0)
+    return SZ_ERROR_MEM;
+
+
+3) initialize CLzmaEncProps properties;
+
+  LzmaEncProps_Init(&props);
+
+  Then you can change some properties in that structure.
+
+4) Send LZMA properties to LZMA Encoder
+
+  res = LzmaEnc_SetProps(enc, &props);
+
+5) Write encoded properties to header
+
+    Byte header[LZMA_PROPS_SIZE + 8];
+    size_t headerSize = LZMA_PROPS_SIZE;
+    UInt64 fileSize;
+    int i;
+
+    res = LzmaEnc_WriteProperties(enc, header, &headerSize);
+    fileSize = MyGetFileLength(inFile);
+    for (i = 0; i < 8; i++)
+      header[headerSize++] = (Byte)(fileSize >> (8 * i));
+    MyWriteFileAndCheck(outFile, header, headerSize)
+
+6) Call encoding function:
+      res = LzmaEnc_Encode(enc, &outStream.funcTable, &inStream.funcTable, 
+        NULL, &g_Alloc, &g_Alloc);
+
+7) Destroy LZMA Encoder Object
+  LzmaEnc_Destroy(enc, &g_Alloc, &g_Alloc);
+
+
+If callback function return some error code, LzmaEnc_Encode also returns that code
+or it can return the code like SZ_ERROR_READ, SZ_ERROR_WRITE or SZ_ERROR_PROGRESS.
+
+
+Single-call RAM->RAM Compression
+--------------------------------
+
+Single-call RAM->RAM Compression is similar to Compression with callbacks,
+but you provide pointers to buffers instead of pointers to stream callbacks:
+
+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark, 
+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+
+Return code:
+  SZ_OK               - OK
+  SZ_ERROR_MEM        - Memory allocation error 
+  SZ_ERROR_PARAM      - Incorrect paramater
+  SZ_ERROR_OUTPUT_EOF - output buffer overflow
+  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
+
+
+
+Defines
+-------
+
+_LZMA_SIZE_OPT - Enable some optimizations in LZMA Decoder to get smaller executable code.
+
+_LZMA_PROB32   - It can increase the speed on some 32-bit CPUs, but memory usage for 
+                 some structures will be doubled in that case.
+
+_LZMA_UINT32_IS_ULONG  - Define it if int is 16-bit on your compiler and long is 32-bit.
+
+_LZMA_NO_SYSTEM_SIZE_T  - Define it if you don't want to use size_t type.
+
+
+_7ZIP_PPMD_SUPPPORT - Define it if you don't want to support PPMD method in AMSI-C .7z decoder.
+
+
+C++ LZMA Encoder/Decoder 
+~~~~~~~~~~~~~~~~~~~~~~~~
+C++ LZMA code use COM-like interfaces. So if you want to use it, 
+you can study basics of COM/OLE.
+C++ LZMA code is just wrapper over ANSI-C code.
+
+
+C++ Notes
+~~~~~~~~~~~~~~~~~~~~~~~~
+If you use some C++ code folders in 7-Zip (for example, C++ code for .7z handling),
+you must check that you correctly work with "new" operator.
+7-Zip can be compiled with MSVC 6.0 that doesn't throw "exception" from "new" operator.
+So 7-Zip uses "CPP\Common\NewHandler.cpp" that redefines "new" operator:
+operator new(size_t size)
+{
+  void *p = ::malloc(size);
+  if (p == 0)
+    throw CNewException();
+  return p;
+}
+If you use MSCV that throws exception for "new" operator, you can compile without 
+"NewHandler.cpp". So standard exception will be used. Actually some code of 
+7-Zip catches any exception in internal code and converts it to HRESULT code.
+So you don't need to catch CNewException, if you call COM interfaces of 7-Zip.
+
+---
+
+http://www.7-zip.org
+http://www.7-zip.org/sdk.html
+http://www.7-zip.org/support.html

data/ext/p7zip/{DOCS → DOC}/readme.txt

@@ -1,9 +1,9 @@
-7-Zip 9.20 Sources
-------------------
+7-Zip 16.02 Sources
+-------------------
 
 7-Zip is a file archiver for Windows. 
 
-7-Zip Copyright (C) 1999-2010 Igor Pavlov.
+7-Zip Copyright (C) 1999-2016 Igor Pavlov.
 
 
 License Info
@@ -36,11 +36,10 @@ In brief it means:
 LZMA SDK
 --------
 
-Also this package contains files from LZMA SDK
-you can download LZMA SDK from this page:
-http://www.7-zip.org/sdk.html
-read about addtional licenses for LZMA SDK in file
-DOC/lzma.txt
+This package also contains some files from LZMA SDK
+You can download LZMA SDK from:
+  http://www.7-zip.org/sdk.html
+LZMA SDK is written and placed in the public domain by Igor Pavlov.
 
 
 How to compile
@@ -98,82 +97,60 @@ DOC                Documentation
   7zFormat.txt   - 7z format description
   copying.txt    - GNU LGPL license
   unRarLicense.txt - License for unRAR part of source code
-  history.txt    - Sources history
+  src-history.txt  - Sources history
   Methods.txt    - Compression method IDs
   readme.txt     - Readme file
-  lzma.txt       - LZMA SDK description
+  lzma.txt       - LZMA compression description
   7zip.nsi       - installer script for NSIS
+  7zip.wix       - installer script for WIX
 
 
+Asm - Source code in Assembler (optimized code for CRC calculation and Intel-AES encryption)
+
 C   - Source code in C
-CPP - Source code in CPP
 
-Common            Common modules
-Windows           Win32 wrappers
+CPP - Source code in C++
+
+Common            common files for C++ projects
+
+Windows           common files for Windows related code
 
 7zip
--------
+
   Common          Common modules for 7-zip
 
-  Archive         7-Zip Archive Format Plugins 
-  --------
-    Common
-    7z
-    Arj
-    BZip2
-    Cab
-    Cpio
-    GZip
-    Rar
-    Rpm            
-    Split
-    Tar
-    Zip
-
-  Bundle          Modules that are bundles of other modules
-  ------
-    Alone         7za.exe: Standalone version of 7z
-    Alone7z       7zr.exe: Standalone version of 7z that supports only 7z/LZMA/BCJ/BCJ2
-    SFXCon        7zCon.sfx: Console 7z SFX module
-    SFXWin        7z.sfx: Windows 7z SFX module
-    SFXSetup      7zS.sfx: Windows 7z SFX module for Installers
+  Archive         files related to archiving
+
+  Bundle          Modules that are bundles of other modules (files)
+
+    Alone         7za.exe: Standalone version of 7-Zip console that supports only 7z/xz/cab/zip/gzip/bzip2/tar.
+    Alone7z       7zr.exe: Standalone version of 7-Zip console that supports only 7z (reduced version)
+    Fm            Standalone version of 7-Zip File Manager
     Format7z            7za.dll:  .7z support
     Format7zExtract     7zxa.dll: .7z support, extracting only
-    Format7zR           7zr.dll:  .7z support, LZMA/BCJ* only
-    Format7zExtractR    7zxr.dll: .7z support, LZMA/BCJ* only, extracting only
+    Format7zR           7zr.dll:  .7z support, reduced version
+    Format7zExtractR    7zxr.dll: .7z support, reduced version, extracting only
     Format7zF           7z.dll:   all formats
+    LzmaCon       lzma.exe: LZMA compression/decompression
+    SFXCon        7zCon.sfx: Console 7z SFX module
+    SFXWin        7z.sfx: Windows 7z SFX module
+    SFXSetup      7zS.sfx: Windows 7z SFX module for Installers
+
+  Compress        files for compression/decompression
+
+  Crypto          files for encryption / decompression
 
   UI
-  --
+
     Agent         Intermediary modules for FAR plugin and Explorer plugin
-    Console       7z.exe Console version
-    Explorer      Explorer plugin
-    Resource      Resources
-    Far           FAR plugin  
     Client7z      Test application for 7za.dll 
+    Common        Common UI files
+    Console       7z.exe : Console version
+    Explorer      7-zip.dll: 7-Zip Shell extension
+    Far           plugin for Far Manager
+    FileManager   7zFM.exe: 7-Zip File Manager
+    GUI           7zG.exe: 7-Zip GUI version
 
-  Compress
-  --------
-    BZip2        BZip2 compressor
-    Branch       Branch converter
-    ByteSwap     Byte Swap converter
-    Copy         Copy coder
-    Deflate       
-    Implode
-    Arj
-    LZMA
-    PPMd          Dmitry Shkarin's PPMdH with small changes.
-    LZ            Lempel - Ziv
-
-  Crypto          Crypto modules
-  ------
-    7zAES         Cipher for 7z
-    AES           AES Cipher
-    Rar20         Cipher for Rar 2.0
-    RarAES        Cipher for Rar 3.0
-    Zip           Cipher for Zip
-
-  FileManager       File Manager
 
 
 ---

data/ext/p7zip/{DOCS/history.txt → DOC/src-history.txt}

@@ -1,5 +1,91 @@
-Sources history of the 7-Zip
-----------------------------
+HISTORY of the 7-Zip source code
+--------------------------------
+
+16.02          2016-05-21
+-------------------------
+- The BUG in 16.00 - 16.01 was fixed:
+  Split Handler (SplitHandler.cpp) returned incorrect 
+  total size value (kpidSize) for split archives.
+
+
+16.01          2016-05-19
+-------------------------	
+- Some bugs were fixed,
+- Some internal changes to reduce the number of compiler warnings.
+
+
+16.00          2016-05-10
+-------------------------	
+- 7-Zip now can extract multivolume ZIP archives (z01, z02, ... , zip).
+- Some bugs were fixed,
+
+
+15.12          2015-11-19
+-------------------------	
+- The BUG in C version of 7z decoder was fixed:
+  7zDec.c : SzDecodeLzma2()
+  7z decoder could mistakenly report about decoding error for some 7z archives
+  that use LZMA2 compression method.
+  The probability to get that mistaken decoding error report was about 
+  one error per 16384 solid blocks for solid blocks larger than 16 KB (compressed size). 
+- The BUG (in 9.26-15.11) in C version of 7z decoder was fixed:
+  7zArcIn.c : SzReadHeader2()
+  7z decoder worked incorrectly for 7z archives that contain 
+  empty solid blocks, that can be placed to 7z archive, if some file is 
+  unavailable for reading during archive creation.
+
+
+15.09 beta     2015-10-16
+-------------------------	
+- The BUG in LZMA / LZMA2 encoding code was fixed.
+  The BUG in LzFind.c::MatchFinder_ReadBlock() function.
+  If input data size is larger than (4 GiB - dictionary_size),
+  the following code worked incorrectly:
+  -  LZMA : LzmaEnc_MemEncode(), LzmaEncode() : LZMA encoding functions 
+     for compressing from memory to memory. 
+     That BUG is not related to LZMA encoder version that works via streams.
+  -  LZMA2 : multi-threaded version of LZMA2 encoder worked incorrectly, if 
+     default value of chunk size (CLzma2EncProps::blockSize) is changed 
+     to value larger than (4 GiB - dictionary_size).
+
+
+9.38 beta      2015-01-03
+-------------------------	
+- The BUG in 9.31-9.37 was fixed:
+  IArchiveGetRawProps interface was disabled for 7z archives.
+- The BUG in 9.26-9.36 was fixed:
+  Some code in CPP\7zip\Archive\7z\ worked correctly only under Windows.
+
+
+9.36 beta      2014-12-26
+-------------------------	
+- The BUG in command line version was fixed:
+  7-Zip created temporary archive in current folder during update archive
+  operation, if -w{Path} switch was not specified. 
+  The fixed 7-Zip creates temporary archive in folder that contains updated archive.
+- The BUG in 9.33-9.35 was fixed:
+  7-Zip silently ignored file reading errors during 7z or gz archive creation,
+  and the created archive contained only part of file that was read before error.
+  The fixed 7-Zip stops archive creation and it reports about error.
+
+
+9.31           2012-10-31
+-------------------------
+- InBuffer.h : CInBuffer  uses ISequentialInStream  *_stream; instead of CMyComPtr<ISequentialInStream> 
+  OutBuffer.h: COutBuffer uses ISequentialOutStream *_stream; instead of CMyComPtr<ISequentialOutStream> 
+	
+
+9.26           2011-04-11
+-------------------------
+- The BUG was fixed: multi-threaded ZIP stored file size that was at scan stage,
+  So if the file was changed after scan, the Unpack Size field was incorrect
+	
+
+9.21           2011-04-11
+-------------------------	
+- New class FString for file names at file systems.
+- Speed optimization in CRC code for big-endian CPUs.
+
 
 9.18           2010-11-02
 -------------------------