sequel 5.83.1 → 5.84.0

data/doc/querying.rdoc

@@ -1,1070 +0,0 @@
-= Querying in Sequel
-
-This guide is based on http://guides.rubyonrails.org/active_record_querying.html
-
-== Purpose of this Guide
-
-Sequel is a flexible and powerful database library
-that supports a wide variety of different querying methods.  This guide
-aims to be a introduction to Sequel's querying support.
-
-While you can use raw SQL with Sequel, a large part of the
-advantage you get from using Sequel is Sequel's ability to abstract
-SQL from you and give you a pure-ruby interface. Sequel also ships with
-a {core_extensions extension}[rdoc-ref:doc/core_extensions.rdoc],
-which adds methods to core ruby types to work with Sequel.
-
-== Retrieving Objects
-
-Sequel provides a few separate methods for retrieving objects from the
-database.  The underlying method is Sequel::Dataset#each, which yields each
-row as the Sequel::Database provides it.  However, while Dataset#each can and
-often is used directly, in many cases there is a more convenient retrieval
-method you can use.
-
-=== Sequel::Dataset
-
-If you are new to Sequel and aren't familiar with Sequel, you should probably
-read the {"Dataset Basics" guide}[rdoc-ref:doc/dataset_basics.rdoc],
-then come back here.
-
-=== Retrieving a Single Object
-
-Sequel offers quite a few ways to to retrieve a single object.
-
-==== Using a Primary Key [Sequel::Model]
-
-The <tt>Sequel::Model.[]</tt> is the easiest method to use to find a model instance
-by its primary key value:
-
-  # Find artist with primary key (id) 1
-  artist = Artist[1]
-  # SELECT * FROM artists WHERE (id = 1)
-  # => #<Artist @values={:name=>"YJM", :id=>1}>
-
-If there is no record with the given primary key, nil will be returned. If you want
-to raise an exception if no record is found, you can use <tt>Sequel::Model.with_pk!</tt>:
-
-  artist = Artist.with_pk!(1)
-
-==== Using +first+
-
-If you want the first record in the dataset,
-<tt>Sequel::Dataset#first</tt> is probably the most obvious method to use:
-
-  artist = Artist.first
-  # SELECT * FROM artists LIMIT 1
-  # => #<Artist @values={:name=>"YJM", :id=>1}>
-
-Any options you pass to +first+ will be used as a filter:
-
-  artist = Artist.first(name: 'YJM')
-  # SELECT * FROM artists WHERE (name = 'YJM') LIMIT 1
-  # => #<Artist @values={:name=>"YJM", :id=>1}>
-  
-  artist = Artist.first(Sequel.like(:name, 'Y%'))
-  # SELECT * FROM artists WHERE (name LIKE 'Y%' ESCAPE '\') LIMIT 1
-  # => #<Artist @values={:name=>"YJM", :id=>1}>
-  
-If there is no matching row, +first+ will return nil.  If you want to
-raise an exception instead, use <tt>first!</tt>.
-
-<tt>Sequel::Dataset#[]</tt> is basically an alias for +first+, except it
-requires an argument:
-
-  DB[:artists][{name: 'YJM'}]
-  # SELECT * FROM artists WHERE (name = 'YJM') LIMIT 1
-  # => {:name=>"YJM", :id=>1}
-
-Note that while Model.[] allows you to pass a primary key directly,
-Dataset#[] does not (unless it is a model dataset).
-
-==== Using +last+
-
-If you want the last record in the dataset,
-<tt>Sequel::Dataset#last</tt> is an obvious method to use.  +last+ requires the
-dataset be ordered, unless the dataset is a model dataset in which case +last+
-will do a reverse order by the primary key field:
-
-  artist = Artist.last
-  # SELECT * FROM artists ORDER BY id DESC LIMIT 1
-  # => #<Artist @values={:name=>"YJM", :id=>1}>
-
-Note:
-
-1. +last+ is equivalent to running a +reverse.first+ query, in other words it reverses the order of the dataset and then calls +first+.  This is why +last+ raises a Sequel::Error when there is no order on a plain dataset - because it will provide the same record as +first+, and most users will find that confusing.
-2. +last+ is not necessarily going to give you the last record in the dataset unless you give the dataset an unambiguous order.
-3. +last+ will ignore +limit+ if chained together in a query because it sets a limit of 1 if no arguments are given.
-
-==== Retrieving a Single Column Value
-
-Sometimes, instead of wanting an entire row, you only want the value of
-a specific column.  For this <tt>Sequel::Dataset#get</tt> is the method
-you want:
-
-  artist_name = Artist.get(:name)
-  # SELECT name FROM artists LIMIT 1
-  # => "YJM"
-
-==== Retrieving a Multiple Column Values
-
-If you want the value for multiple columns, you can pass an array to
-<tt>Sequel::Dataset#get</tt>:
-
-  artist_id, artist_name = Artist.get([:id, :name])
-  # SELECT id, name FROM artists LIMIT 1
-  # => [1, "YJM"]
-
-=== Retrieving Multiple Objects
-
-==== As an Array of Hashes or Model Objects
-
-In many cases, you want an array of all of the rows associated with the
-dataset, in which case <tt>Sequel::Dataset#all</tt> is the method you
-want to use:
-
-  artists = Artist.all
-  # SELECT * FROM artists
-  # => [#<Artist @values={:name=>"YJM", :id=>1}>,
-  #     #<Artist @values={:name=>"AS", :id=>2}>]
-
-==== Using an Enumerable Interface
-
-<tt>Sequel::Dataset</tt> uses an Enumerable Interface, so it provides a
-method named each that yields hashes or model objects as they are retrieved
-from the database:
-
-  Artist.each{|x| p x.name}
-  # SELECT * FROM artists
-  "YJM"
-  "AS"
-
-This means that all of the methods in the Enumerable module are available,
-such as +map+:
-
-  artist_names = Artist.map{|x| x.name}
-  # SELECT * FROM artists
-  # => ["YJM", "AS"]
-
-==== As an Array of Column Values
-
-Sequel also has an extended +map+ method that takes an argument.  If you
-provide an argument to +map+, it will return an array of values for the
-given column.  So the previous example can be handled more easily with:
-
-  artist_names = Artist.map(:name)
-  # SELECT * FROM artists
-  # => ["YJM", "AS"]
-
-One difference between these two ways of returning an array of values is
-that providing +map+ with an argument is really doing:
-
-  artist_names = Artist.map{|x| x[:name]} # not x.name
-
-Note that regardless of whether you provide +map+ with an argument, it
-does not modify the columns selected.  If you only want to select a
-single column and return an array of the columns values, you can use
-+select_map+:
-
-  artist_names = Artist.select_map(:name)
-  # SELECT name FROM artists
-  # => ["YJM", "AS"]
-
-It's also common to want to order such a map, so Sequel provides a
-+select_order_map+ method as well:
-
-  artist_names = Artist.select_order_map(:name)
-  # SELECT name FROM artists ORDER BY name
-  # => ["AS", "YJM"]
-
-In all of these cases, you can provide an array of column symbols and
-an array of arrays of values will be returned:
-
-  artist_names = Artist.select_map([:id, :name])
-  # SELECT id, name FROM artists
-  # => [[1, "YJM"], [2, "AS"]]
-
-==== As a Hash
-
-Sequel makes it easy to take an SQL query and return it as a ruby hash,
-using the +as_hash+ method:
-
-  artist_names = Artist.as_hash(:id, :name)
-  # SELECT * FROM artists
-  # => {1=>"YJM", 2=>"AS"}
-
-As you can see, the +as_hash+ method uses the first symbol as the key
-and the second symbol as the value.  So if you swap the two arguments the hash
-will have its keys and values transposed:
-
-  artist_names = Artist.as_hash(:name, :id)
-  # SELECT * FROM artists
-  # => {"YJM"=>1, "AS"=>2}
-
-Now what if you have multiple values for the same key?  By default, +as_hash+
-will just have the last matching value.  If you care about all matching values,
-use +to_hash_groups+, which makes the values of the array an array of matching
-values, in the order they were received:
-
-  artist_names = Artist.to_hash_groups(:name, :id)
-  # SELECT * FROM artists
-  # => {"YJM"=>[1, 10, ...], "AS"=>[2, 20, ...]}
-
-If you only provide one argument to +as_hash+, it uses the entire hash
-or model object as the value:
-
-  artist_names = DB[:artists].as_hash(:name)
-  # SELECT * FROM artists
-  # => {"YJM"=>{:id=>1, :name=>"YJM"}, "AS"=>{:id=>2, :name=>"AS"}}
-
-and +to_hash_groups+ works similarly:
-
-  artist_names = DB[:artists].to_hash_groups(:name)
-  # SELECT * FROM artists
-  # => {"YJM"=>[{:id=>1, :name=>"YJM"}, {:id=>10, :name=>"YJM"}], ...}
-
-Model datasets have a +as_hash+ method that can be called without any
-arguments, in which case it will use the primary key as the key and
-the model object as the value.  This can be used to easily create an
-identity map:
-
-  artist_names = Artist.as_hash
-  # SELECT * FROM artists
-  # => {1=>#<Artist @values={:id=>1, :name=>"YGM"}>,
-  #     2=>#<Artist @values={:id=>2, :name=>"AS"}>}
-
-There is no equivalent handling to +to_hash_groups+, since there would
-only be one matching record, as the primary key must be unique.
-
-Note that +as_hash+ never modifies the columns selected.  However, just
-like Sequel has a +select_map+ method to modify the columns selected and
-return an array, Sequel also has a +select_hash+ method to modify the
-columns selected and return a hash:
-
-  artist_names = Artist.select_hash(:name, :id)
-  # SELECT name, id FROM artists
-  # => {"YJM"=>1, "AS"=>2}
-
-Likewise, +select_hash_groups+ also exists:
-
-  artist_names = Artist.select_hash_groups(:name, :id)
-  # SELECT name, id FROM artists
-  # => {"YJM"=>[1, 10, ...], "AS"=>[2, 20, ...]}
-
-== Modifying datasets 
-
-Note that the retrieval methods discussed above just return
-the row(s) included in the existing dataset.  In most cases,
-you aren't interested in every row in a table, but in a subset
-of the rows, based on some criteria.  In Sequel, filtering
-the dataset is generally done separately than retrieving
-the records.
-
-There are really two types of dataset methods that you will
-be using:
-
-1. Methods that return row(s), discussed above
-2. Methods that return modified datasets, discussed below
-
-Sequel datasets are frozen and use a method chaining, functional style API
-that returns modified datasets.  Let's start with a simple example.
-
-This is a basic dataset that includes all records in the
-table +artists+:
-
-  ds1 = DB[:artists]
-  # SELECT * FROM artists
-
-Let's say we are only interested in the artists whose names
-start with "A":
-
-  ds2 = ds1.where(Sequel.like(:name, 'A%'))
-  # SELECT * FROM artists WHERE (name LIKE 'A%' ESCAPE '\')
-
-Here we see that +where+ returns a dataset that adds a +WHERE+
-clause to the query.  It's important to note that +where+ does
-not modify the receiver:
-
-  ds1
-  # SELECT * FROM artists
-  ds2
-  # SELECT * FROM artists WHERE (name LIKE 'A%' ESCAPE '\')
- 
-In Sequel, dataset methods do not modify the dataset itself, so you can freely use the dataset in multiple
-places without worrying that its usage in one place will affect its usage
-in another place.  This is what is meant by a functional style API.
-
-Let's say we only want to select the id and name columns, and that
-we want to order by name:
-
-  ds3 = ds2.order(:name).select(:id, :name)
-  # SELECT id, name FROM artists WHERE (name LIKE 'A%' ESCAPE '\') ORDER BY name
-  
-Note how you don't need to assign the returned value of order to a variable,
-and then call select on that.  Because order just returns a dataset, you can
-call select directly on the returned dataset.  This is what is meant by a
-method chaining API.
-
-Also note how you can call methods that modify different clauses in any order.
-In this case, the WHERE clause was added first, then the ORDER clause, then the
-SELECT clause was modified.  This makes for a flexible API, where you can modify
-any part of the query at any time.
-
-== Filters
-
-Filtering is probably the most common dataset modifying action done in Sequel.
-Both the +where+ and +filter+ methods filter the dataset by modifying the
-dataset's WHERE clause.  Both accept a wide variety of input formats, discussed
-below.
-
-=== Hashes
-
-The most common format for providing filters is via a hash.  In general, Sequel
-treats conditions specified with a hash as equality, inclusion, or identity.  What type
-of condition is used depends on the values in the hash.
-
-Unless Sequel has special support for the value's class, it uses a simple
-equality statement:
-
-  Artist.where(id: 1)
-  # SELECT * FROM artists WHERE (id = 1)
-
-  Artist.where(name: 'YJM')
-  # SELECT * FROM artists WHERE (name = 'YJM')
-
-For arrays, Sequel uses the IN operator with a value list:
-
-  Artist.where(id: [1, 2])
-  # SELECT * FROM artists WHERE (id IN (1, 2))
-
-For datasets, Sequel uses the IN operator with a subselect:
-
-  Artist.where(id: Album.select(:artist_id))
-  # SELECT * FROM artists WHERE (id IN (
-  #   SELECT artist_id FROM albums))
-
-For boolean values such as nil, true, and false, Sequel uses the IS operator:
-
-  Artist.where(id: nil)
-  # SELECT * FROM artists WHERE (id IS NULL)
-
-For ranges, Sequel uses a pair of inequality statements:
-
-  Artist.where(id: 1..5)
-  # SELECT * FROM artists WHERE ((id >= 1) AND (id <= 5))
-
-  Artist.where(id: 1...5)
-  # SELECT * FROM artists WHERE ((id >= 1) AND (id < 5))
-
-Finally, for regexps, Sequel uses an SQL regular expression.  Note that this
-is only supported by default on PostgreSQL and MySQL.  It can also be supported
-on SQLite when using the sqlite adapter with the :setup_regexp_function
-Database option.
-
-  Artist.where(name: /JM$/)
-  # SELECT * FROM artists WHERE (name ~ 'JM$')
-
-If there are multiple arguments in the hash, the filters are ANDed together:
-
-  Artist.where(id: 1, name: /JM$/)
-  # SELECT * FROM artists WHERE ((id = 1) AND (name ~ 'JM$'))
-
-This works the same as if you used two separate +where+ calls:
-
-  Artist.where(id: 1).where(name: /JM$/)
-  # SELECT * FROM artists WHERE ((id = 1) AND (name ~ 'JM$'))
-
-=== Array of Two Element Arrays
-
-If you use an array of two element arrays, it is treated as a hash.  The only
-advantage to using an array of two element arrays is that it allows you to
-duplicate keys, so you can do:
-
-  Artist.where([[:name, /JM$/], [:name, /^YJ/]])
-  # SELECT * FROM artists WHERE ((name ~ 'JM$')) AND ((name ~ '^YJ'))
-
-=== Virtual Row Blocks
-
-If a block is passed to a filter, it is treated as a virtual row block:
-
-  Artist.where{id > 5}
-  # SELECT * FROM artists WHERE (id > 5)
-
-You can learn more about virtual row blocks in the {"Virtual Rows" guide}[rdoc-ref:doc/virtual_rows.rdoc].
-
-You can provide both regular arguments and a block, in which case the results
-will be ANDed together:
-
-  Artist.where(name: 'A'...'M'){id > 5}
-  # SELECT * FROM artists WHERE ((name >= 'A') AND (name < 'M') AND (id > 5))
-
-Using virtual row blocks, what you can do with single entry hash or an array with
-a single two element array can also be done using the =~ method:
-
-  Artist.where{id =~ 5}
-  # SELECT * FROM artists WHERE (id = 5)
-
-=== Symbols
-
-If you have a boolean column in the database, and you want only true
-values, you can just provide the column symbol to filter:
-
-  Artist.where(:retired)
-  # SELECT * FROM artists WHERE retired
-
-=== SQL::Expression
-
-Sequel has a DSL that allows easily creating SQL expressions.  These SQL
-expressions are instances of subclasses of Sequel::SQL::Expression. You've
-already seen an example earlier:
-
-  Artist.where(Sequel.like(:name, 'Y%'))
-  # SELECT * FROM artists WHERE name LIKE 'Y%' ESCAPE '\'
-
-In this case Sequel.like returns a Sequel::SQL::BooleanExpression object,
-which is used directly in the filter.
-
-You can use the DSL to create arbitrarily complex expressions.  SQL::Expression
-objects can be created via singleton methods on the Sequel module.  The most common
-method is Sequel.[], which takes any object and wraps it in a SQL::Expression
-object.  In most cases, the SQL::Expression returned supports the & operator for
-+AND+, the | operator for +OR+, and the ~ operator for inversion:
-
-  Artist.where(Sequel.like(:name, 'Y%') & (Sequel[{b: 1}] | Sequel.~(c: 3)))
-  # SELECT * FROM artists WHERE ((name LIKE 'Y%' ESCAPE '\') AND ((b = 1) OR (c != 3)))
-
-You can combine these expression operators with the virtual row support:
-
-  Artist.where{(a > 1) & ~((b(c) < 1) | d)}
-  # SELECT * FROM artists WHERE ((a > 1) AND (b(c) >= 1) AND NOT d)
-
-Note the use of parentheses when using the & and | operators, as they have lower
-precedence than other operators.  The following will not work:
-
-  Artist.where{a > 1 & ~(b(c) < 1 | d)}
-  # Raises a TypeError
-
-=== Strings with Placeholders
-
-Assuming you want to get your hands dirty and use SQL fragments in filters, Sequel allows you
-to do so if you explicitly mark the strings as literal strings using +Sequel.lit+. You can
-use placeholders in the string and pass arguments for the placeholders:
-
-  Artist.where(Sequel.lit("name LIKE ?", 'Y%'))
-  # SELECT * FROM artists WHERE (name LIKE 'Y%')
-
-This is the most common type of placeholder, where each question mark is substituted
-with the next argument:
-
-  Artist.where(Sequel.lit("name LIKE ? AND id = ?", 'Y%', 5))
-  # SELECT * FROM artists WHERE (name LIKE 'Y%' AND id = 5)
-
-You can also use named placeholders with a hash, where the named placeholders use
-colons before the placeholder names:
-
-  Artist.where(Sequel.lit("name LIKE :name AND id = :id", name: 'Y%', id: 5))
-  # SELECT * FROM artists WHERE (name LIKE 'Y%' AND id = 5)
-
-You don't have to provide any placeholders if you don't want to:
-
-  Artist.where(Sequel.lit("id = 2"))
-  # SELECT * FROM artists WHERE id = 2
-
-However, if you are using any untrusted input, you should definitely be using placeholders.
-In general, unless you are hardcoding values in the strings, you should use placeholders.
-You should never pass a string that has been built using interpolation, unless you are
-sure of what you are doing.
-
-  Artist.where(Sequel.lit("id = #{params[:id]}")) # Don't do this!
-  Artist.where(Sequel.lit("id = ?", params[:id])) # Do this instead
-  Artist.where(id: params[:id].to_i)              # Even better
-
-=== Inverting
-
-You may be wondering how to specify a not equals condition in Sequel, or the NOT IN
-operator.  Sequel has generic support for inverting conditions, so to write a not
-equals condition, you write an equals condition, and invert it:
-
-  Artist.where(id: 5).invert
-  # SELECT * FROM artists WHERE (id != 5)
-
-Note that +invert+ inverts the entire filter:
-
-  Artist.where(id: 5).where{name > 'A'}.invert
-  # SELECT * FROM artists WHERE ((id != 5) OR (name <= 'A'))
-
-In general, +invert+ is used rarely, since +exclude+ allows you to invert only specific
-filters:
-
-  Artist.exclude(id: 5)
-  # SELECT * FROM artists WHERE (id != 5)
-  
-  Artist.where(id: 5).exclude{name > 'A'}
-  # SELECT * FROM artists WHERE ((id = 5) AND (name <= 'A')
-
-So to do a NOT IN with an array:
-
-  Artist.exclude(id: [1, 2])
-  # SELECT * FROM artists WHERE (id NOT IN (1, 2))
-
-Or to use the NOT LIKE operator:
-
-  Artist.exclude(Sequel.like(:name, '%J%'))
-  # SELECT * FROM artists WHERE (name NOT LIKE '%J%' ESCAPE '\')
-
-You can use Sequel.~ to negate expressions:
-
-  Artist.where(Sequel.~(id: 5))
-  # SELECT * FROM artists WHERE id != 5
-
-On Sequel expression objects, you can use ~ to negate them:
- 
-  Artist.where(~Sequel.like(:name, '%J%'))
-  # SELECT * FROM artists WHERE (name NOT LIKE '%J%' ESCAPE '\')
-
-You can use !~ on Sequel expressions to create negated expressions:
-
-  Artist.where{id !~ 5}
-  # SELECT * FROM artists WHERE (id != 5)
-
-=== Removing
-
-To remove all existing filters, use +unfiltered+:
-
-  Artist.where(id: 1).unfiltered
-  # SELECT * FROM artists
-
-== Ordering
-
-Sequel offers quite a few methods to manipulate the SQL ORDER BY clause.  The
-most basic of these is +order+:
-
-  Artist.order(:id)
-  # SELECT * FROM artists ORDER BY id
-
-You can specify multiple arguments to order by more than one column:
-
-  Album.order(:artist_id, :id)
-  # SELECT * FROM album ORDER BY artist_id, id
-
-Note that unlike +where+, +order+ replaces an existing order, it does not
-append to an existing order:
-
-  Artist.order(:id).order(:name)
-  # SELECT * FROM artists ORDER BY name
-  
-If you want to add a column to the end of the existing order:
-
-  Artist.order(:id).order_append(:name)
-  # SELECT * FROM artists ORDER BY id, name
-
-If you want to add a column to the beginning of the existing order:
-
-  Artist.order(:id).order_prepend(:name)
-  # SELECT * FROM artists ORDER BY name, id
-
-=== Reversing
-
-Just like you can invert an existing filter, you can reverse an existing
-order, using +reverse+ without an order:
-
-  Artist.order(:id).reverse
-  # SELECT FROM artists ORDER BY id DESC
-
-Alternatively, you can provide reverse with the order:
-
-  Artist.reverse(:id)
-  # SELECT FROM artists ORDER BY id DESC
-
-To specify a single entry be reversed, <tt>Sequel.desc</tt> can be used:
-
-  Artist.order(Sequel.desc(:id))
-  # SELECT FROM artists ORDER BY id DESC
-
-This allows you to easily use both ascending and descending orders:
-
-  Artist.order(:name, Sequel.desc(:id))
-  # SELECT FROM artists ORDER BY name, id DESC
-
-=== Removing
-
-Just like you can remove filters with +unfiltered+, you can remove
-orders with +unordered+:
-
-  Artist.order(:name).unordered
-  # SELECT * FROM artists
-
-== Selected Columns
-
-Sequel offers a few methods to manipulate the columns selected.  As
-you may be able to guess, the main method used is +select+:
-
-  Artist.select(:id, :name)
-  # SELECT id, name FROM artists
-
-You just specify all of the columns that you are selecting as
-arguments to the method.
-
-If you are dealing with model objects, you'll want to include the
-primary key if you want to update or destroy the object.  You'll
-also want to include any keys (primary or foreign) related to
-associations you plan to use.
-
-If a column is not selected, and you attempt to access it, you will
-get nil:
-
-  artist = Artist.select(:name).first
-  # SELECT name FROM artists LIMIT 1
-
-  artist[:id]
-  # => nil
-
-Like +order+, +select+ replaces the existing selected columns:
-
-  Artist.select(:id).select(:name)
-  # SELECT name FROM artists
-
-To append to the existing selected columns, use +select_append+:
-
-  Artist.select(:id).select_append(:name)
-  # SELECT id, name FROM artists
-
-To prepend to the existing selected columns, use +select_prepend+:
-
-  Artist.select(:id).select_prepend(:name)
-  # SELECT name, id FROM artists
-
-To remove specifically selected columns, and default back to all
-columns, use +select_all+:
-
-  Artist.select(:id).select_all
-  # SELECT * FROM artists
-
-To select all columns from a given table, provide an argument to
-+select_all+:
-
-  Artist.select_all(:artists)
-  # SELECT artists.* FROM artists
-
-=== Distinct
-
-To treat duplicate rows as a single row when retrieving the records,
-use +distinct+:
-
-  Artist.distinct.select(:name)
-  # SELECT DISTINCT name FROM artists
-
-Note that DISTINCT is a separate SQL clause, it's not a function
-that you pass to select.
-
-== Limit and Offset
-
-You can limit the dataset to a given number of rows using +limit+:
-
-  Artist.limit(5)
-  # SELECT * FROM artists LIMIT 5
-
-You can provide a second argument to +limit+ to specify an offset:
-
-  Artist.limit(5, 10)
-  # SELECT * FROM artists LIMIT 5 OFFSET 10
-
-You can also call the +offset+ method separately:
-
-  Artist.limit(5).offset(10)
-  # SELECT * FROM artists LIMIT 5 OFFSET 10
-
-Either of these would return the 11th through 15th records in the original
-dataset.
-
-To remove a limit and offset from a dataset, use +unlimited+:
-
-  Artist.limit(5, 10).unlimited
-  # SELECT * FROM artists
-
-== Grouping
-
-The SQL GROUP BY clause is used to combine multiple rows based on
-the values of a given group of columns.
-
-To modify the GROUP BY clause of the SQL statement, you use +group+:
-
-  Album.group(:artist_id)
-  # SELECT * FROM albums GROUP BY artist_id
-
-You can remove an existing grouping using +ungrouped+:
-
-  Album.group(:artist_id).ungrouped
-  # SELECT * FROM albums
-
-If you want to add a column to the end of the existing grouping columns:
-
-  Album.group(:artist_id).group_append(:name)
-  # SELECT * FROM albums GROUP BY artist_id, name
- 
-A common use of grouping is to count based on the number of grouped rows,
-and Sequel provides a +group_and_count+ method to make this easier:
-
-  Album.group_and_count(:artist_id)
-  # SELECT artist_id, count(*) AS count FROM albums GROUP BY artist_id
-
-This will return the number of albums for each artist_id.
-
-If you want to select and group on the same columns, you can use +select_group+:
-
-  Album.select_group(:artist_id)
-  # SELECT artist_id FROM albums GROUP BY artist_id
-
-Usually you would add a +select_append+ call after that, to add some sort of
-aggregation:
-
-  Album.select_group(:artist_id).select_append{sum(num_tracks).as(tracks)}
-  # SELECT artist_id, sum(num_tracks) AS tracks FROM albums GROUP BY artist_id
-  
-== Having
-
-The SQL HAVING clause is similar to the WHERE clause, except that
-filters the results after the grouping has been applied, instead of
-before.  One possible use is if you only wanted to return artists
-who had at least 10 albums:
-
-  Album.group_and_count(:artist_id).having{count.function.* >= 10}
-  # SELECT artist_id, count(*) AS count FROM albums
-  # GROUP BY artist_id HAVING (count(*) >= 10)
-
-Both the WHERE clause and the HAVING clause are removed by +unfiltered+:
-
-  Album.group_and_count(:artist_id).having{count.function.* >= 10}.
-   where(:name.like('A%')).unfiltered
-  # SELECT artist_id, count(*) AS count FROM albums GROUP BY artist_id
-
-== Joins
-
-Sequel has support for many different SQL join types.
-The underlying method used is +join_table+:
-
-  Album.join_table(:inner, :artists, id: :artist_id)
-  # SELECT * FROM albums
-  # INNER JOIN artists ON (artists.id = albums.artist_id)
-
-In most cases, you won't call +join_table+ directly, as Sequel provides
-shortcuts for all common (and most uncommon) join types. For example
-+join+ does an inner join:
-
-  Album.join(:artists, id: :artist_id)
-  # SELECT * FROM albums
-  # INNER JOIN artists ON (artists.id = albums.artist_id)
-
-And +left_join+ does a LEFT JOIN:
-
-  Album.left_join(:artists, id: :artist_id)
-  # SELECT * FROM albums
-  # LEFT JOIN artists ON (artists.id = albums.artist_id)
-
-=== Table/Dataset to Join
-
-For all of these specialized join methods, the first argument is
-generally the name of the table to which you are joining.  However, you
-can also provide a dataset, in which case a subselect is used:
-
-  Album.join(Artist.where{name < 'A'}, id: :artist_id)
-  # SELECT * FROM albums
-  # INNER JOIN (SELECT * FROM artists WHERE (name < 'A')) AS t1
-  #  ON (t1.id = albums.artist_id)
-
-=== Join Conditions
-
-The second argument to the specialized join methods is the conditions 
-to use when joining, which is similar to a filter expression, with
-a few minor exceptions.
-
-==== Implicit Qualification
-
-A hash used as the join conditions operates similarly to a filter,
-except that unqualified symbol keys are automatically qualified
-with the table from the first argument, and unqualified symbol values
-are automatically qualified with the last table joined (or the first
-table in the dataset if there hasn't been a previous join):
-
-  Album.join(:artists, id: :artist_id)
-  # SELECT * FROM albums
-  # INNER JOIN artists ON (artists.id = albums.artist_id)
-
-Note how the +id+ symbol is automatically qualified with +artists+,
-while the +artist_id+ symbol is automatically qualified with +albums+.
-
-Because Sequel uses the last joined table for implicit qualifications
-of values, you can do things like:
-
-  Album.join(:artists, id: :artist_id).
-   join(:members, artist_id: :id)
-  # SELECT * FROM albums
-  # INNER JOIN artists ON (artists.id = albums.artist_id)
-  # INNER JOIN members ON (members.artist_id = artists.id)
-
-Note that when joining to the +members+ table, +artist_id+ is qualified
-with +members+ and +id+ is qualified with +artists+.
-
-While a good default, implicit qualification is not always correct:
-
-  Album.join(:artists, id: :artist_id).
-   join(:tracks, album_id: :id)
-  # SELECT * FROM albums
-  # INNER JOIN artists ON (artists.id = albums.artist_id)
-  # INNER JOIN tracks ON (tracks.album_id = artists.id)
-
-Note here how +id+ is qualified with +artists+ instead of +albums+. This
-is wrong as the foreign key <tt>tracks.album_id</tt> refers to <tt>albums.id</tt>, not
-<tt>artists.id</tt>.  To fix this, you need to explicitly qualify when joining:
-
-  Album.join(:artists, id: :artist_id).
-   join(:tracks, album_id: Sequel[:albums][:id])
-  # SELECT * FROM albums
-  # INNER JOIN artists ON (artists.id = albums.artist_id)
-  # INNER JOIN tracks ON (tracks.album_id = albums.id)
-
-Just like in filters, an array of two element arrays is treated the same
-as a hash, but allows for duplicate keys:
-
-  Album.join(:artists, [[:id, :artist_id], [:id, 1..5]])
-  # SELECT * FROM albums INNER JOIN artists
-  #  ON ((artists.id = albums.artist_id)
-  #   AND (artists.id >= 1) AND (artists.id <= 5))
-
-And just like in the hash case, unqualified symbol elements in the
-array are implicitly qualified.
-
-By default, Sequel only qualifies unqualified symbols in the conditions.  However,
-You can provide an options hash with a <tt>qualify: :deep</tt> option to do a deep
-qualification, which can qualify subexpressions.  For example, let's say you are doing
-a JOIN using case insensitive string comparison:
-
-  Album.join(:artists, {Sequel.function(:lower, :name) =>
-                        Sequel.function(:lower, :artist_name)},
-             qualify: :deep)
-  # SELECT * FROM albums INNER JOIN artists
-  #  ON (lower(artists.name) = lower(albums.artist_name))
-
-Note how the arguments to lower were qualified correctly in both cases.
-
-==== USING Joins
-
-The most common type of join conditions is a JOIN ON, as displayed
-above.  However, the SQL standard allows for join conditions to be
-specified with JOIN USING, assuming the column name is the same in
-both tables.
-
-For example, if instead of having a primary
-column named +id+ in all of your tables, you use +artist_id+ in your
-+artists+ table and +album_id+ in your +albums+ table, you could do:
-
-  Album.join(:artists, [:artist_id])
-  # SELECT * FROM albums INNER JOIN artists USING (artist_id)
-
-See here how you specify the USING columns as an array of symbols.
-
-==== NATURAL Joins
-
-NATURAL joins take it one step further than USING joins, by assuming
-that all columns with the same names in both tables should be
-used for joining:
-
-  Album.natural_join(:artists)
-  # SELECT * FROM albums NATURAL JOIN artists
-
-In this case, you don't even need to specify any conditions.
-
-==== Join Blocks
-
-You can provide a block to any of the join methods that accept
-conditions.  This block should accept 3 arguments: the table alias
-for the table currently being joined, the table alias for the last
-table joined (or first table), and an array of previous
-<tt>Sequel::SQL::JoinClause</tt>s.
-
-This allows you to qualify columns similar to how the implicit
-qualification works, without worrying about the specific aliases
-being used.  For example, let's say you wanted to join the albums
-and artists tables, but only want albums where the artist's name
-comes before the album's name.
-
-  Album.join(:artists, id: :artist_id) do |j, lj, js|
-    Sequel[j][:name] < Sequel[lj][:name]
-  end
-  # SELECT * FROM albums INNER JOIN artists
-  # ON ((artists.id = albums.artist_id)
-  # AND (artists.name < albums.name))
-
-Because greater than can't be expressed with a hash in Sequel, you
-need to use a block and qualify the tables manually.
-
-== From
-
-In general, the FROM table is the first clause populated when creating
-a dataset.  For a standard Sequel::Model, the dataset already has the
-FROM clause populated, and the most common way to create datasets is
-with the <tt>Database#[]</tt> method, which populates the FROM clause.
-
-However, you can modify the tables you are selecting FROM using +from+:
-
-  Album.from(:albums, :old_albums)
-  # SELECT * FROM albums, old_albums
-
-Be careful with this, as multiple tables in the FROM clause use a cross
-join by default, so the number of rows will be number of albums times the
-number of old albums.
-
-Using multiple FROM tables and setting conditions in the WHERE clause is
-an old-school way of joining tables:
-
-  DB.from(:albums, :artists).where{{artists[:id]=>albums[:artist_id]}}
-  # SELECT * FROM albums, artists WHERE (artists.id = albums.artist_id)
-
-=== Using the current dataset in a subselect
-
-In some cases, you may want to wrap the current dataset in a subselect.
-Here's an example using +from_self+:
-
-  Album.order(:artist_id).limit(100).from_self.group(:artist_id)
-  # SELECT * FROM (SELECT * FROM albums ORDER BY artist_id LIMIT 100)
-  #  AS t1 GROUP BY artist_id
-
-This is different than without +from_self+:
-
-  Album.order(:artist_id).limit(100).group(:artist_id)
-  # SELECT * FROM albums GROUP BY artist_id ORDER BY name LIMIT 100
-
-Without +from_self+, you are doing the grouping, and limiting the number
-of grouped records returned to 100.  So assuming you have albums by more
-than 100 artists, you'll end up with 100 results.
-
-With +from_self+, you are limiting the number of records before grouping.
-So if the artist with the lowest id had 100 albums, you'd get 1 result,
-not 100.
-
-== Locking for Update
-
-Sequel allows you to easily add a FOR UPDATE clause to your queries so
-that the records returned can't be modified by another query until the
-current transaction commits.  You just use the +for_update+ dataset
-method when returning the rows:
-
-  DB.transaction do
-    album = Album.for_update.first(id: 1)
-    # SELECT * FROM albums WHERE (id = 1) FOR UPDATE
-    album.num_tracks += 1
-    album.save
-  end
-
-This will ensure that no other connection modifies the row between when you select
-it and when the transaction ends.
-
-=== Optimistic Locking
-
-One of the model plugins that ships with Sequel is an optimistic locking plugin, which provides
-a database independent way to detect and raise an error if two different connections
-modify the same row.  It's useful for things like web forms where you cannot keep a
-transaction open while the user is looking at the form, because of the web's
-stateless nature.
-
-== Custom SQL
-
-Sequel makes it easy to use custom SQL for the query by providing it to the <tt>Database#[]</tt>
-method as a string:
-
-  DB["SELECT * FROM artists"]
-  # SELECT * FROM artists
-
-You can also use the +with_sql+ dataset method to return a dataset that uses that
-exact SQL:
-
-  DB[:albums].with_sql("SELECT * FROM artists")
-  # SELECT * FROM artists
-
-With either of these methods, you can use placeholders:
-
-  DB["SELECT * FROM artists WHERE id = ?", 5]
-  # SELECT * FROM artists WHERE id = 5
-
-  DB[:albums].with_sql("SELECT * FROM artists WHERE id = :id", id: 5)
-  # SELECT * FROM artists WHERE id = 5
-
-Note that if you specify the dataset using custom SQL, you can still call the dataset
-modification methods, but in many cases they will appear to have no affect:
-
-  DB["SELECT * FROM artists"].select(:name).order(:id)
-  # SELECT * FROM artists
-
-You can use the implicit_subquery extension to automatically wrap queries that use
-custom SQL in subqueries if a method is called that would modify the SQL:
-
-  DB.extension :implicit_subquery
-  DB["SELECT * FROM artists"].select(:name).order(:id)
-  # SELECT name FROM (SELECT * FROM artists) AS t1 ORDER BY id"
-
-If you must drop down to using custom SQL, it's recommended that you only do so for
-specific parts of a query.  For example, if the reason you are using custom SQL is
-to use a custom operator in the database in the SELECT clause:
-
-  DB["SELECT name, (foo !@# ?) AS baz FROM artists", 'bar']
-
-it's better to use Sequel's DSL, and use a literal string for the custom operator:
-
-  DB[:artists].select(:name, Sequel.lit("(foo !@# ?)", 'bar').as(:baz))
-
-That way Sequel's method chaining still works, and it increases Sequel's ability to
-introspect the code.
-
-== Checking for Records
-
-If you just want to know whether the current dataset would return any rows, use <tt>empty?</tt>:
-
-  Album.empty?
-  # SELECT 1 FROM albums LIMIT 1
-  # => false
-
-  Album.where(id: 0).empty?
-  # SELECT 1 FROM albums WHERE (id = 0) LIMIT 1
-  # => true
-
-  Album.where(Sequel.like(:name, 'R%')).empty?
-  # SELECT 1 FROM albums WHERE (name LIKE 'R%' ESCAPE '\') LIMIT 1
-  # => false
-
-== Aggregate Calculations
-
-The SQL standard defines a few helpful methods to get aggreate information about
-datasets, such as +count+, +sum+, +avg+, +min+, and +max+.  There are dataset methods
-for each of these aggregate functions.
-
-+count+ just returns the number of records in the dataset.
-
-  Album.count
-  # SELECT count(*) AS count FROM albums LIMIT 1
-  # => 2
- 
-If you pass an expression to count, it will return the number of records where
-that expression in not NULL:
-
-  Album.count(:artist_id)
-  # SELECT count(artist_id) AS count FROM albums LIMIT 1
-  # => 1
-
-The other methods take a column argument and call the aggregate function with
-the argument:
-
-  Album.sum(:id)
-  # SELECT sum(id) AS sum FROM albums LIMIT 1
-  # => 3
-
-  Album.avg(:id)
-  # SELECT avg(id) AS avg FROM albums LIMIT 1
-  # => 1.5
-
-  Album.min(:id)
-  # SELECT min(id) AS min FROM albums LIMIT 1
-  # => 1
-
-  Album.max(:id)
-  # SELECT max(id) AS max FROM albums LIMIT 1
-  # => 2