selenium-webdriver 3.142.6 → 4.1.0

data/lib/selenium/webdriver/common/driver_extensions/has_network_connection.rb

@@ -17,40 +17,19 @@
 # specific language governing permissions and limitations
 # under the License.
 
+# TODO: Deprecated; Delete after 4.0 release
 module Selenium
   module WebDriver
     module DriverExtensions
       module HasNetworkConnection
         def network_connection_type
-          connection_value = @bridge.network_connection
-
-          connection_type = values_to_type[connection_value]
-
-          # In case the connection type is not recognized return the
-          # connection value.
-          connection_type || connection_value
-        end
-
-        def network_connection_type=(connection_type)
-          raise ArgumentError, 'Invalid connection type' unless valid_type? connection_type
-
-          connection_value = type_to_values[connection_type]
-
-          @bridge.network_connection = connection_value
-        end
-
-        private
-
-        def type_to_values
-          {airplane_mode: 1, wifi: 2, data: 4, all: 6, none: 0}
-        end
-
-        def values_to_type
-          type_to_values.invert
+          raise Error::UnsupportedOperationError,
+                'The W3C standard does not currently support getting network connection'
         end
 
-        def valid_type?(type)
-          type_to_values.key? type
+        def network_connection_type=(*)
+          raise Error::UnsupportedOperationError,
+                'The W3C standard does not currently support setting network connection'
         end
       end # HasNetworkConnection
     end # DriverExtensions

data/lib/selenium/webdriver/common/driver_extensions/has_network_interception.rb

@@ -0,0 +1,136 @@
+# frozen_string_literal: true
+
+# Licensed to the Software Freedom Conservancy (SFC) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The SFC licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+module Selenium
+  module WebDriver
+    module DriverExtensions
+      module HasNetworkInterception
+
+        #
+        # Intercepts requests coming from browser allowing
+        # to either pass them through like proxy or provide
+        # a stubbed response instead.
+        #
+        # @example Log requests and pass through
+        #   driver.intercept do |request, &continue|
+        #     puts "#{request.method} #{request.url}"
+        #     continue.call(request)
+        #   end
+        #
+        # @example Stub requests for images
+        #   driver.intercept do |request, &continue|
+        #     if request.url.match?(/\.png$/)
+        #       request.url = 'https://upload.wikimedia.org/wikipedia/commons/d/d5/Selenium_Logo.png'
+        #     end
+        #     continue.call(request)
+        #   end
+        #
+        # @example Log responses and pass through
+        #   driver.intercept do |request, &continue|
+        #     continue.call(request) do |response|
+        #       puts "#{response.code} #{response.body}"
+        #     end
+        #   end
+        #
+        # @example Mutate specific response
+        #   driver.intercept do |request, &continue|
+        #     continue.call(request) do |response|
+        #       response.body << 'Added by Selenium!' if request.url.include?('/myurl')
+        #     end
+        #   end
+        #
+        # @param [Proc] block which is called when request is intercepted
+        # @yieldparam [DevTools::Request] request
+        # @yieldparam [Proc] continue block which proceeds with the request and optionally yields response
+        #
+
+        def intercept(&block)
+          devtools.network.set_cache_disabled(cache_disabled: true)
+          devtools.fetch.on(:request_paused) do |params|
+            id = params['requestId']
+            if params.key?('responseStatusCode') || params.key?('responseErrorReason')
+              intercept_response(id, params, &pending_response_requests.delete(id))
+            else
+              intercept_request(id, params, &block)
+            end
+          end
+          devtools.fetch.enable(patterns: [{requestStage: 'Request'}, {requestStage: 'Response'}])
+        end
+
+        private
+
+        def pending_response_requests
+          @pending_response_requests ||= {}
+        end
+
+        def intercept_request(id, params, &block)
+          original = DevTools::Request.from(id, params)
+          mutable = DevTools::Request.from(id, params)
+
+          block.call(mutable) do |&continue| # rubocop:disable Performance/RedundantBlockCall
+            pending_response_requests[id] = continue
+
+            if original == mutable
+              devtools.fetch.continue_request(request_id: id)
+            else
+              devtools.fetch.continue_request(
+                request_id: id,
+                url: mutable.url,
+                method: mutable.method,
+                post_data: mutable.post_data,
+                headers: mutable.headers.map do |k, v|
+                  {name: k, value: v}
+                end
+              )
+            end
+          end
+        end
+
+        def intercept_response(id, params)
+          return devtools.fetch.continue_request(request_id: id) unless block_given?
+
+          body = fetch_response_body(id)
+          original = DevTools::Response.from(id, body, params)
+          mutable = DevTools::Response.from(id, body, params)
+          yield mutable
+
+          if original == mutable
+            devtools.fetch.continue_request(request_id: id)
+          else
+            devtools.fetch.fulfill_request(
+              request_id: id,
+              body: (Base64.strict_encode64(mutable.body) if mutable.body),
+              response_code: mutable.code,
+              response_headers: mutable.headers.map do |k, v|
+                {name: k, value: v}
+              end
+            )
+          end
+        end
+
+        def fetch_response_body(id)
+          devtools.fetch.get_response_body(request_id: id).dig('result', 'body')
+        rescue Error::WebDriverError
+          # CDP fails to get body on certain responses (301) and raises:
+          # Can only get response body on requests captured after headers received.
+        end
+      end # HasNetworkInterception
+    end # DriverExtensions
+  end # WebDriver
+end # Selenium

data/lib/selenium/webdriver/common/driver_extensions/has_permissions.rb

@@ -23,26 +23,26 @@ module Selenium
       module HasPermissions
 
         #
-        # Returns permissions.
+        # Set one permission.
         #
-        # @return [Hash]
+        # @param [String] name which permission to set
+        # @param [String] value what to set the permission to
         #
 
-        def permissions
-          @bridge.permissions
+        def add_permission(name, value)
+          @bridge.set_permission(name, value)
         end
 
         #
-        # Sets permissions.
+        # Set multiple permissions.
         #
-        # @example
-        #   driver.permissions = {'getUserMedia' => true}
-        #
-        # @param [Hash<Symbol, Boolean>] permissions
+        # @param [Hash] opt key/value pairs to set permissions
         #
 
-        def permissions=(permissions)
-          @bridge.permissions = permissions
+        def add_permissions(opt)
+          opt.each do |key, value|
+            @bridge.set_permission(key, value)
+          end
         end
 
       end # HasPermissions

data/lib/selenium/webdriver/common/driver_extensions/has_pinned_scripts.rb

@@ -0,0 +1,77 @@
+# frozen_string_literal: true
+
+# Licensed to the Software Freedom Conservancy (SFC) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The SFC licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+module Selenium
+  module WebDriver
+    module DriverExtensions
+      module HasPinnedScripts
+
+        #
+        # Returns the list of all pinned scripts.
+        #
+        # @return [Array<DevTools::PinnedScript>]
+        #
+
+        def pinned_scripts
+          @pinned_scripts ||= []
+        end
+
+        #
+        # Pins JavaScript snippet that is available during the whole
+        # session on every page. This allows to store and call
+        # scripts without sending them over the wire every time.
+        #
+        # @example
+        #   script = driver.pin_script('return window.location.href')
+        #   driver.execute_script(script)
+        #   # navigate to a new page
+        #   driver.execute_script(script)
+        #
+        # @param [String] script
+        # @return [DevTools::PinnedScript]
+        #
+
+        def pin_script(script)
+          script = DevTools::PinnedScript.new(script)
+          pinned_scripts << script
+
+          devtools.page.enable
+          devtools.runtime.evaluate(expression: script.callable)
+          response = devtools.page.add_script_to_evaluate_on_new_document(source: script.callable)
+          script.devtools_identifier = response.dig('result', 'identifier')
+
+          script
+        end
+
+        #
+        # Unpins script making it undefined for the subsequent calls.
+        #
+        # @param [DevTools::PinnedScript]
+        #
+
+        def unpin_script(script)
+          devtools.runtime.evaluate(expression: script.remove)
+          devtools.page.remove_script_to_evaluate_on_new_document(identifier: script.devtools_identifier)
+          pinned_scripts.delete(script)
+        end
+
+      end # HasPinnedScripts
+    end # DriverExtensions
+  end # WebDriver
+end # Selenium

data/lib/selenium/webdriver/common/driver_extensions/has_remote_status.rb

@@ -22,6 +22,7 @@ module Selenium
     module DriverExtensions
       module HasRemoteStatus
         def remote_status
+          WebDriver.logger.deprecate('#remote_status', '#status')
           @bridge.status
         end
       end # HasRemoteStatus

data/lib/selenium/webdriver/common/driver_extensions/{rotatable.rb → prints_page.rb}

@@ -19,43 +19,41 @@
 
 module Selenium
   module WebDriver
-    #
-    # @api private
-    #
-
     module DriverExtensions
-      module Rotatable
-        ORIENTATIONS = %i[landscape portrait].freeze
-
+      module PrintsPage
+        #
+        # Save a page as a PDF to the given path
         #
-        # Change the screen orientation
+        # @example Save Printed Page
+        #   driver.save_print_page('../printed_page.pdf')
         #
-        # @param [:landscape, :portrait] orientation
+        # @param [String] path to where the pdf should be saved
         #
         # @api public
         #
 
-        def rotation=(orientation)
-          unless ORIENTATIONS.include?(orientation)
-            raise ArgumentError, "expected #{ORIENTATIONS.inspect}, got #{orientation.inspect}"
+        def save_print_page(path, **options)
+          File.open(path, 'wb') do |file|
+            content = Base64.decode64 print_page(**options)
+            file << content
           end
-
-          bridge.screen_orientation = orientation.to_s.upcase
         end
-        alias_method :rotate, :rotation=
 
         #
-        # Get the current screen orientation
+        # Return a Base64 encoded Print Page as a string
         #
-        # @return [:landscape, :portrait] orientation
+        # @see https://w3c.github.io/webdriver/#print-page
         #
         # @api public
         #
 
-        def orientation
-          bridge.screen_orientation.to_sym.downcase
+        def print_page(**options)
+          options[:pageRanges] = Array(options.delete(:page_ranges)) || []
+          options[:shrinkToFit] = options.delete(:shrink_to_fit) { true }
+
+          @bridge.print_page(options)
         end
-      end # Rotatable
+      end # PrintsPage
     end # DriverExtensions
   end # WebDriver
 end # Selenium

data/lib/selenium/webdriver/common/element.rb

@@ -20,7 +20,10 @@
 module Selenium
   module WebDriver
     class Element
+      ELEMENT_KEY = 'element-6066-11e4-a52e-4f735466cecf'
+
       include SearchContext
+      include TakesScreenshot
 
       #
       # Creates a new Element
@@ -89,13 +92,18 @@ module Selenium
       end
 
       #
-      # Get the value of a the given attribute of the element. Will return the current value, even if
-      # this has been modified after the page has been loaded. More exactly, this method will return
-      # the value of the given attribute, unless that attribute is not present, in which case the
-      # value of the property with the same name is returned. If neither value is set, nil is
-      # returned. The "style" attribute is converted as best can be to a text representation with a
-      # trailing semi-colon. The following are deemed to be "boolean" attributes, and will
-      # return either "true" or "false":
+      # This method attempts to provide the most likely desired current value for the attribute
+      # of the element, even when that desired value is actually a JavaScript property.
+      # It is implemented with a custom JavaScript atom. To obtain the exact value of the attribute or property,
+      # use #dom_attribute or #property methods respectively.
+      #
+      # More exactly, this method will return the value of the property with the given name,
+      # if it exists. If it does not, then the value of the attribute with the given name is returned.
+      # If neither exists, null is returned.
+      #
+      # The "style" attribute is converted as best can be to a text representation with a trailing semi-colon.
+      #
+      # The following are deemed to be "boolean" attributes, and will return either "true" or "false":
       #
       # async, autofocus, autoplay, checked, compact, complete, controls, declare, defaultchecked,
       # defaultselected, defer, disabled, draggable, ended, formnovalidate, hidden, indeterminate,
@@ -103,29 +111,73 @@ module Selenium
       # nowrap, open, paused, pubdate, readonly, required, reversed, scoped, seamless, seeking,
       # selected, spellcheck, truespeed, willvalidate
       #
-      # Finally, the following commonly mis-capitalized attribute/property names are evaluated as
-      # expected:
+      # Finally, the following commonly mis-capitalized attribute/property names are evaluated as expected:
       #
-      # class, readonly
+      # When the value of "class" is requested, the "className" property is returned.
+      # When the value of "readonly" is requested, the "readOnly" property is returned.
       #
       # @param [String] name attribute name
       # @return [String, nil] attribute value
       #
+      # @see #dom_attribute
+      # @see #property
+      #
 
       def attribute(name)
         bridge.element_attribute self, name
       end
 
       #
-      # Get the value of a the given property with the same name of the element. If the value is not
-      # set, nil is returned.
+      # Gets the value of a declared HTML attribute of this element.
+      #
+      # As opposed to the #attribute method, this method
+      # only returns attributes declared in the element's HTML markup.
+      #
+      # If the attribute is not set, nil is returned.
+      #
+      # @param [String] name attribute name
+      # @return [String, nil] attribute value
+      #
+      # @see #attribute
+      # @see #property
+      #
+
+      def dom_attribute(name)
+        bridge.element_dom_attribute @id, name
+      end
+
+      #
+      # Gets the value of a JavaScript property of this element
+      # This will return the current value,
+      # even if this has been modified after the page has been loaded.
+      # If the value is not set, nil is returned.
       #
       # @param [String] name property name
       # @return [String, nil] property value
       #
 
       def property(name)
-        bridge.element_property self, name
+        bridge.element_property @id, name
+      end
+
+      #
+      # Gets the computed WAI-ARIA role of element
+      #
+      # @return [String]
+      #
+
+      def aria_role
+        bridge.element_aria_role @id
+      end
+
+      #
+      # Gets the computed WAI-ARIA label of element.
+      #
+      # @return [String]
+      #
+
+      def accessible_name
+        bridge.element_aria_label @id
       end
 
       #
@@ -265,6 +317,16 @@ module Selenium
         bridge.element_size @id
       end
 
+      #
+      # Returns the shadow root of an element.
+      #
+      # @return [WebDriver::ShadowRoot]
+      #
+
+      def shadow_root
+        bridge.shadow_root @id
+      end
+
       #-------------------------------- sugar  --------------------------------
 
       #
@@ -284,14 +346,13 @@ module Selenium
       #
       alias_method :[], :attribute
 
-      #
-      # for SearchContext and execute_script
       #
       # @api private
+      # @see SearchContext
       #
 
       def ref
-        @id
+        [:element, @id]
       end
 
       #
@@ -312,12 +373,7 @@ module Selenium
       #
 
       def as_json(*)
-        key = if bridge.dialect == :w3c
-                'element-6066-11e4-a52e-4f735466cecf'
-              else
-                'ELEMENT'
-              end
-        @id.is_a?(Hash) ? @id : {key => @id}
+        @id.is_a?(Hash) ? @id : {ELEMENT_KEY => @id}
       end
 
       private
@@ -330,6 +386,10 @@ module Selenium
 
         tn == 'option' || (tn == 'input' && %w[radio checkbox].include?(type))
       end
+
+      def screenshot
+        bridge.element_screenshot(@id)
+      end
     end # Element
   end # WebDriver
 end # Selenium