seira 0.8.2 → 0.8.3

data/.default-rubocop.yml

@@ -1,1769 +0,0 @@
-# This is the default configuration file. Enabling and disabling is configured
-# in separate files. This file adds all other parameters apart from Enabled.
-
-# Common configuration.
-AllCops:
-  # Include common Ruby source files.
-  Include:
-    - '**/*.arb'
-    - '**/*.axlsx'
-    - '**/*.builder'
-    - '**/*.fcgi'
-    - '**/*.gemfile'
-    - '**/*.gemspec'
-    - '**/*.god'
-    - '**/*.jb'
-    - '**/*.jbuilder'
-    - '**/*.mspec'
-    - '**/*.opal'
-    - '**/*.pluginspec'
-    - '**/*.podspec'
-    - '**/*.rabl'
-    - '**/*.rake'
-    - '**/*.rbuild'
-    - '**/*.rbw'
-    - '**/*.rbx'
-    - '**/*.ru'
-    - '**/*.ruby'
-    - '**/*.spec'
-    - '**/*.thor'
-    - '**/*.watchr'
-    - '**/.irbrc'
-    - '**/.pryrc'
-    - '**/buildfile'
-    - '**/config.ru'
-    - '**/Appraisals'
-    - '**/Berksfile'
-    - '**/Brewfile'
-    - '**/Buildfile'
-    - '**/Capfile'
-    - '**/Cheffile'
-    - '**/Dangerfile'
-    - '**/Deliverfile'
-    - '**/Fastfile'
-    - '**/*Fastfile'
-    - '**/Gemfile'
-    - '**/Guardfile'
-    - '**/Jarfile'
-    - '**/Mavenfile'
-    - '**/Podfile'
-    - '**/Puppetfile'
-    - '**/Rakefile'
-    - '**/Snapfile'
-    - '**/Thorfile'
-    - '**/Vagabondfile'
-    - '**/Vagrantfile'
-  Exclude:
-    - 'node_modules/**/*'
-    - 'vendor/**/*'
-    - '.git/**/*'
-  # Default formatter will be used if no `-f/--format` option is given.
-  DefaultFormatter: progress
-  # Cop names are displayed in offense messages by default. Change behavior
-  # by overriding DisplayCopNames, or by giving the `--no-display-cop-names`
-  # option.
-  DisplayCopNames: true
-  # Style guide URLs are not displayed in offense messages by default. Change
-  # behavior by overriding `DisplayStyleGuide`, or by giving the
-  # `-S/--display-style-guide` option.
-  DisplayStyleGuide: false
-  # When specifying style guide URLs, any paths and/or fragments will be
-  # evaluated relative to the base URL.
-  StyleGuideBaseURL: https://github.com/bbatsov/ruby-style-guide
-  # Extra details are not displayed in offense messages by default. Change
-  # behavior by overriding ExtraDetails, or by giving the
-  # `-E/--extra-details` option.
-  ExtraDetails: false
-  # Additional cops that do not reference a style guide rule may be enabled by
-  # default. Change behavior by overriding `StyleGuideCopsOnly`, or by giving
-  # the `--only-guide-cops` option.
-  StyleGuideCopsOnly: false
-  # All cops except the ones in disabled.yml are enabled by default. Change
-  # this behavior by overriding either `DisabledByDefault` or `EnabledByDefault`.
-  # When `DisabledByDefault` is `true`, all cops in the default configuration
-  # are disabled, and only cops in user configuration are enabled. This makes
-  # cops opt-in instead of opt-out. Note that when `DisabledByDefault` is `true`,
-  # cops in user configuration will be enabled even if they don't set the
-  # Enabled parameter.
-  # When `EnabledByDefault` is `true`, all cops, even those in disabled.yml,
-  # are enabled by default.  Cops can still be disabled in user configuration.
-  # Note that it is invalid to set both EnabledByDefault and DisabledByDefault
-  # to true in the same configuration.
-  EnabledByDefault: false
-  DisabledByDefault: false
-  # Enables the result cache if `true`. Can be overridden by the `--cache` command
-  # line option.
-  UseCache: true
-  # Threshold for how many files can be stored in the result cache before some
-  # of the files are automatically removed.
-  MaxFilesInCache: 20000
-  # The cache will be stored in "rubocop_cache" under this directory. If
-  # CacheRootDirectory is ~ (nil), which it is by default, the root will be
-  # taken from the environment variable `$XDG_CACHE_HOME` if it is set, or if
-  # `$XDG_CACHE_HOME` is not set, it will be `$HOME/.cache/`.
-  CacheRootDirectory: ~
-  # It is possible for a malicious user to know the location of RuboCop's cache
-  # directory by looking at CacheRootDirectory, and create a symlink in its
-  # place that could cause RuboCop to overwrite unintended files, or read
-  # malicious input. If you are certain that your cache location is secure from
-  # this kind of attack, and wish to use a symlinked cache location, set this
-  # value to "true".
-  AllowSymlinksInCacheRootDirectory: false
-  # What MRI version of the Ruby interpreter is the inspected code intended to
-  # run on? (If there is more than one, set this to the lowest version.)
-  # If a value is specified for TargetRubyVersion then it is used. Acceptable
-  # values are specificed as a float (i.e. 2.5); the teeny version of Ruby
-  # should not be included. If the project specifies a Ruby version in the
-  # .ruby-version file, Gemfile or gems.rb file, RuboCop will try to determine
-  # the desired version of Ruby by inspecting the .ruby-version file first,
-  # followed by the Gemfile.lock or gems.locked file. (Although the Ruby version
-  # is specified in the Gemfile or gems.rb file, RuboCop reads the final value
-  # from the lock file.) If the Ruby version is still unresolved, RuboCop will
-  # use the oldest officially supported Ruby version (currently Ruby 2.1).
-  TargetRubyVersion: ~
-  # What version of Rails is the inspected code using?  If a value is specified
-  # for TargetRailsVersion then it is used.  Acceptable values are specificed
-  # as a float (i.e. 5.1); the patch version of Rails should not be included.
-  # If TargetRailsVersion is not set, RuboCop will parse the Gemfile.lock or
-  # gems.locked file to find the version of Rails that has been bound to the
-  # application.  If neither of those files exist, RuboCop will use Rails 5.0
-  # as the default.
-  TargetRailsVersion: ~
-
-#################### Layout ###########################
-
-# Indent private/protected/public as deep as method definitions
-Layout/AccessModifierIndentation:
-  EnforcedStyle: indent
-  SupportedStyles:
-    - outdent
-    - indent
-  # By default, the indentation width from Layout/IndentationWidth is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-# Align the elements of a hash literal if they span more than one line.
-Layout/AlignHash:
-  # Alignment of entries using hash rocket as separator. Valid values are:
-  #
-  # key - left alignment of keys
-  #   'a' => 2
-  #   'bb' => 3
-  # separator - alignment of hash rockets, keys are right aligned
-  #    'a' => 2
-  #   'bb' => 3
-  # table - left alignment of keys, hash rockets, and values
-  #   'a'  => 2
-  #   'bb' => 3
-  EnforcedHashRocketStyle: key
-  SupportedHashRocketStyles:
-    - key
-    - separator
-    - table
-  # Alignment of entries using colon as separator. Valid values are:
-  #
-  # key - left alignment of keys
-  #   a: 0
-  #   bb: 1
-  # separator - alignment of colons, keys are right aligned
-  #    a: 0
-  #   bb: 1
-  # table - left alignment of keys and values
-  #   a:  0
-  #   bb: 1
-  EnforcedColonStyle: key
-  SupportedColonStyles:
-    - key
-    - separator
-    - table
-  # Select whether hashes that are the last argument in a method call should be
-  # inspected? Valid values are:
-  #
-  # always_inspect - Inspect both implicit and explicit hashes.
-  #   Registers an offense for:
-  #     function(a: 1,
-  #       b: 2)
-  #   Registers an offense for:
-  #     function({a: 1,
-  #       b: 2})
-  # always_ignore - Ignore both implicit and explicit hashes.
-  #   Accepts:
-  #     function(a: 1,
-  #       b: 2)
-  #   Accepts:
-  #     function({a: 1,
-  #       b: 2})
-  # ignore_implicit - Ignore only implicit hashes.
-  #   Accepts:
-  #     function(a: 1,
-  #       b: 2)
-  #   Registers an offense for:
-  #     function({a: 1,
-  #       b: 2})
-  # ignore_explicit - Ignore only explicit hashes.
-  #   Accepts:
-  #     function({a: 1,
-  #       b: 2})
-  #   Registers an offense for:
-  #     function(a: 1,
-  #       b: 2)
-  EnforcedLastArgumentHashStyle: always_inspect
-  SupportedLastArgumentHashStyles:
-    - always_inspect
-    - always_ignore
-    - ignore_implicit
-    - ignore_explicit
-
-Layout/AlignParameters:
-  # Alignment of parameters in multi-line method calls.
-  #
-  # The `with_first_parameter` style aligns the following lines along the same
-  # column as the first parameter.
-  #
-  #     method_call(a,
-  #                 b)
-  #
-  # The `with_fixed_indentation` style aligns the following lines with one
-  # level of indentation relative to the start of the line with the method call.
-  #
-  #     method_call(a,
-  #       b)
-  EnforcedStyle: with_first_parameter
-  SupportedStyles:
-    - with_first_parameter
-    - with_fixed_indentation
-  # By default, the indentation width from Layout/IndentationWidth is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-# checks whether the end keywords are aligned properly for `do` `end` blocks.
-Layout/BlockAlignment:
-  # The value `start_of_block` means that the `end` should be aligned with line
-  # where the `do` keyword appears.
-  # The value `start_of_line` means it should be aligned with the whole
-  # expression's starting line.
-  # The value `either` means both are allowed.
-  EnforcedStyleAlignWith: either
-  SupportedStylesAlignWith:
-    - either
-    - start_of_block
-    - start_of_line
-
-# Indentation of `when`.
-Layout/CaseIndentation:
-  EnforcedStyle: case
-  SupportedStyles:
-    - case
-    - end
-  IndentOneStep: false
-  # By default, the indentation width from `Layout/IndentationWidth` is used.
-  # But it can be overridden by setting this parameter.
-  # This only matters if `IndentOneStep` is `true`
-  IndentationWidth: ~
-
-Layout/DefEndAlignment:
-  # The value `def` means that `end` should be aligned with the def keyword.
-  # The value `start_of_line` means that `end` should be aligned with method
-  # calls like `private`, `public`, etc, if present in front of the `def`
-  # keyword on the same line.
-  EnforcedStyleAlignWith: start_of_line
-  SupportedStylesAlignWith:
-    - start_of_line
-    - def
-  AutoCorrect: false
-  Severity: warning
-
-# Multi-line method chaining should be done with leading dots.
-Layout/DotPosition:
-  EnforcedStyle: leading
-  SupportedStyles:
-    - leading
-    - trailing
-
-Layout/EmptyComment:
-  AllowBorderComment: true
-  AllowMarginComment: true
-
-# Use empty lines between defs.
-Layout/EmptyLineBetweenDefs:
-  # If `true`, this parameter means that single line method definitions don't
-  # need an empty line between them.
-  AllowAdjacentOneLineDefs: false
-  # Can be array to specify minimum and maximum number of empty lines, e.g. [1, 2]
-  NumberOfEmptyLines: 1
-
-Layout/EmptyLinesAroundBlockBody:
-  EnforcedStyle: no_empty_lines
-  SupportedStyles:
-    - empty_lines
-    - no_empty_lines
-
-Layout/EmptyLinesAroundClassBody:
-  EnforcedStyle: no_empty_lines
-  SupportedStyles:
-    - empty_lines
-    - empty_lines_except_namespace
-    - empty_lines_special
-    - no_empty_lines
-    - beginning_only
-    - ending_only
-
-Layout/EmptyLinesAroundModuleBody:
-  EnforcedStyle: no_empty_lines
-  SupportedStyles:
-    - empty_lines
-    - empty_lines_except_namespace
-    - empty_lines_special
-    - no_empty_lines
-
-# Align ends correctly.
-Layout/EndAlignment:
-  # The value `keyword` means that `end` should be aligned with the matching
-  # keyword (`if`, `while`, etc.).
-  # The value `variable` means that in assignments, `end` should be aligned
-  # with the start of the variable on the left hand side of `=`. In all other
-  # situations, `end` should still be aligned with the keyword.
-  # The value `start_of_line` means that `end` should be aligned with the start
-  # of the line which the matching keyword appears on.
-  EnforcedStyleAlignWith: keyword
-  SupportedStylesAlignWith:
-    - keyword
-    - variable
-    - start_of_line
-  AutoCorrect: false
-  Severity: warning
-
-Layout/EndOfLine:
-  # The `native` style means that CR+LF (Carriage Return + Line Feed) is
-  # enforced on Windows, and LF is enforced on other platforms. The other styles
-  # mean LF and CR+LF, respectively.
-  EnforcedStyle: native
-  SupportedStyles:
-    - native
-    - lf
-    - crlf
-
-Layout/ExtraSpacing:
-  # When true, allows most uses of extra spacing if the intent is to align
-  # things with the previous or next line, not counting empty lines or comment
-  # lines.
-  AllowForAlignment: true
-  # When true, forces the alignment of `=` in assignments on consecutive lines.
-  ForceEqualSignAlignment: false
-
-Layout/FirstParameterIndentation:
-  EnforcedStyle: special_for_inner_method_call_in_parentheses
-  SupportedStyles:
-    # The first parameter should always be indented one step more than the
-    # preceding line.
-    - consistent
-    # The first parameter should normally be indented one step more than the
-    # preceding line, but if it's a parameter for a method call that is itself
-    # a parameter in a method call, then the inner parameter should be indented
-    # relative to the inner method.
-    - special_for_inner_method_call
-    # Same as `special_for_inner_method_call` except that the special rule only
-    # applies if the outer method call encloses its arguments in parentheses.
-    - special_for_inner_method_call_in_parentheses
-  # By default, the indentation width from `Layout/IndentationWidth` is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-Layout/IndentationConsistency:
-  # The difference between `rails` and `normal` is that the `rails` style
-  # prescribes that in classes and modules the `protected` and `private`
-  # modifier keywords shall be indented the same as public methods and that
-  # protected and private members shall be indented one step more than the
-  # modifiers. Other than that, both styles mean that entities on the same
-  # logical depth shall have the same indentation.
-  EnforcedStyle: normal
-  SupportedStyles:
-    - normal
-    - rails
-
-Layout/IndentationWidth:
-  # Number of spaces for each indentation level.
-  Width: 2
-  IgnoredPatterns: []
-
-# Checks the indentation of the first element in an array literal.
-Layout/IndentArray:
-  # The value `special_inside_parentheses` means that array literals with
-  # brackets that have their opening bracket on the same line as a surrounding
-  # opening round parenthesis, shall have their first element indented relative
-  # to the first position inside the parenthesis.
-  #
-  # The value `consistent` means that the indentation of the first element shall
-  # always be relative to the first position of the line where the opening
-  # bracket is.
-  #
-  # The value `align_brackets` means that the indentation of the first element
-  # shall always be relative to the position of the opening bracket.
-  EnforcedStyle: special_inside_parentheses
-  SupportedStyles:
-    - special_inside_parentheses
-    - consistent
-    - align_brackets
-  # By default, the indentation width from `Layout/IndentationWidth` is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-# Checks the indentation of assignment RHS, when on a different line from LHS
-Layout/IndentAssignment:
-  # By default, the indentation width from `Layout/IndentationWidth` is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-# Checks the indentation of the first key in a hash literal.
-Layout/IndentHash:
-  # The value `special_inside_parentheses` means that hash literals with braces
-  # that have their opening brace on the same line as a surrounding opening
-  # round parenthesis, shall have their first key indented relative to the
-  # first position inside the parenthesis.
-  #
-  # The value `consistent` means that the indentation of the first key shall
-  # always be relative to the first position of the line where the opening
-  # brace is.
-  #
-  # The value `align_braces` means that the indentation of the first key shall
-  # always be relative to the position of the opening brace.
-  EnforcedStyle: special_inside_parentheses
-  SupportedStyles:
-    - special_inside_parentheses
-    - consistent
-    - align_braces
-  # By default, the indentation width from `Layout/IndentationWidth` is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-Layout/IndentHeredoc:
-  EnforcedStyle: auto_detection
-  SupportedStyles:
-    - auto_detection
-    - squiggly
-    - active_support
-    - powerpack
-    - unindent
-
-Layout/SpaceInLambdaLiteral:
-  EnforcedStyle: require_no_space
-  SupportedStyles:
-    - require_no_space
-    - require_space
-
-Layout/MultilineArrayBraceLayout:
-  EnforcedStyle: symmetrical
-  SupportedStyles:
-    # symmetrical: closing brace is positioned in same way as opening brace
-    # new_line: closing brace is always on a new line
-    # same_line: closing brace is always on the same line as last element
-    - symmetrical
-    - new_line
-    - same_line
-
-Layout/MultilineAssignmentLayout:
-  # The types of assignments which are subject to this rule.
-  SupportedTypes:
-    - block
-    - case
-    - class
-    - if
-    - kwbegin
-    - module
-  EnforcedStyle: new_line
-  SupportedStyles:
-    # Ensures that the assignment operator and the rhs are on the same line for
-    # the set of supported types.
-    - same_line
-    # Ensures that the assignment operator and the rhs are on separate lines
-    # for the set of supported types.
-    - new_line
-
-Layout/MultilineHashBraceLayout:
-  EnforcedStyle: symmetrical
-  SupportedStyles:
-    # symmetrical: closing brace is positioned in same way as opening brace
-    # new_line: closing brace is always on a new line
-    # same_line: closing brace is always on same line as last element
-    - symmetrical
-    - new_line
-    - same_line
-
-Layout/MultilineMethodCallBraceLayout:
-  EnforcedStyle: symmetrical
-  SupportedStyles:
-    # symmetrical: closing brace is positioned in same way as opening brace
-    # new_line: closing brace is always on a new line
-    # same_line: closing brace is always on the same line as last argument
-    - symmetrical
-    - new_line
-    - same_line
-
-Layout/MultilineMethodCallIndentation:
-  EnforcedStyle: aligned
-  SupportedStyles:
-    - aligned
-    - indented
-    - indented_relative_to_receiver
-  # By default, the indentation width from Layout/IndentationWidth is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-Layout/MultilineMethodDefinitionBraceLayout:
-  EnforcedStyle: symmetrical
-  SupportedStyles:
-    # symmetrical: closing brace is positioned in same way as opening brace
-    # new_line: closing brace is always on a new line
-    # same_line: closing brace is always on the same line as last parameter
-    - symmetrical
-    - new_line
-    - same_line
-
-Layout/MultilineOperationIndentation:
-  EnforcedStyle: aligned
-  SupportedStyles:
-    - aligned
-    - indented
-  # By default, the indentation width from `Layout/IndentationWidth` is used
-  # But it can be overridden by setting this parameter
-  IndentationWidth: ~
-
-Layout/SpaceAroundBlockParameters:
-  EnforcedStyleInsidePipes: no_space
-  SupportedStylesInsidePipes:
-    - space
-    - no_space
-
-Layout/SpaceAroundEqualsInParameterDefault:
-  EnforcedStyle: space
-  SupportedStyles:
-    - space
-    - no_space
-
-Layout/SpaceAroundOperators:
-  # When `true`, allows most uses of extra spacing if the intent is to align
-  # with an operator on the previous or next line, not counting empty lines
-  # or comment lines.
-  AllowForAlignment: true
-
-Layout/SpaceBeforeBlockBraces:
-  EnforcedStyle: space
-  SupportedStyles:
-    - space
-    - no_space
-  EnforcedStyleForEmptyBraces: space
-  SupportedStylesForEmptyBraces:
-    - space
-    - no_space
-
-Layout/SpaceBeforeFirstArg:
-  # When `true`, allows most uses of extra spacing if the intent is to align
-  # things with the previous or next line, not counting empty lines or comment
-  # lines.
-  AllowForAlignment: true
-
-Layout/SpaceInsideArrayLiteralBrackets:
-  EnforcedStyle: no_space
-  SupportedStyles:
-    - space
-    - no_space
-    # 'compact' normally requires a space inside the brackets, with the exception
-    # that successive left brackets or right brackets are collapsed together
-    - compact
-  EnforcedStyleForEmptyBrackets: no_space
-  SupportedStylesForEmptyBrackets:
-    - space
-    - no_space
-
-Layout/SpaceInsideBlockBraces:
-  EnforcedStyle: space
-  SupportedStyles:
-    - space
-    - no_space
-  EnforcedStyleForEmptyBraces: no_space
-  SupportedStylesForEmptyBraces:
-    - space
-    - no_space
-  # Space between `{` and `|`. Overrides `EnforcedStyle` if there is a conflict.
-  SpaceBeforeBlockParameters: true
-
-Layout/SpaceInsideHashLiteralBraces:
-  EnforcedStyle: space
-  SupportedStyles:
-    - space
-    - no_space
-    # 'compact' normally requires a space inside hash braces, with the exception
-    # that successive left braces or right braces are collapsed together
-    - compact
-  EnforcedStyleForEmptyBraces: no_space
-  SupportedStylesForEmptyBraces:
-    - space
-    - no_space
-
-Layout/SpaceInsideReferenceBrackets:
-  EnforcedStyle: no_space
-  SupportedStyles:
-    - space
-    - no_space
-  EnforcedStyleForEmptyBrackets: no_space
-  SupportedStylesForEmptyBrackets:
-    - space
-    - no_space
-
-Layout/SpaceInsideStringInterpolation:
-  EnforcedStyle: no_space
-  SupportedStyles:
-    - space
-    - no_space
-
-Layout/ClassStructure:
-  Categories:
-    module_inclusion:
-      - include
-      - prepend
-      - extend
-  ExpectedOrder:
-      - module_inclusion
-      - constants
-      - public_class_methods
-      - initializer
-      - public_methods
-      - protected_methods
-      - private_methods
-
-Layout/Tab:
-  # By default, the indentation width from Layout/IndentationWidth is used
-  # But it can be overridden by setting this parameter
-  # It is used during auto-correction to determine how many spaces should
-  # replace each tab.
-  IndentationWidth: ~
-
-Layout/TrailingBlankLines:
-  EnforcedStyle: final_newline
-  SupportedStyles:
-    - final_newline
-    - final_blank_line
-
-#################### Naming ##########################
-
-Naming/FileName:
-  # File names listed in `AllCops:Include` are excluded by default. Add extra
-  # excludes here.
-  Exclude: []
-  # When `true`, requires that each source file should define a class or module
-  # with a name which matches the file name (converted to ... case).
-  # It further expects it to be nested inside modules which match the names
-  # of subdirectories in its path.
-  ExpectMatchingDefinition: false
-  # If non-`nil`, expect all source file names to match the following regex.
-  # Only the file name itself is matched, not the entire file path.
-  # Use anchors as necessary if you want to match the entire name rather than
-  # just a part of it.
-  Regex: ~
-  # With `IgnoreExecutableScripts` set to `true`, this cop does not
-  # report offending filenames for executable scripts (i.e. source
-  # files with a shebang in the first line).
-  IgnoreExecutableScripts: true
-  AllowedAcronyms:
-    - CLI
-    - DSL
-    - ACL
-    - API
-    - ASCII
-    - CPU
-    - CSS
-    - DNS
-    - EOF
-    - GUID
-    - HTML
-    - HTTP
-    - HTTPS
-    - ID
-    - IP
-    - JSON
-    - LHS
-    - QPS
-    - RAM
-    - RHS
-    - RPC
-    - SLA
-    - SMTP
-    - SQL
-    - SSH
-    - TCP
-    - TLS
-    - TTL
-    - UDP
-    - UI
-    - UID
-    - UUID
-    - URI
-    - URL
-    - UTF8
-    - VM
-    - XML
-    - XMPP
-    - XSRF
-    - XSS
-
-Naming/HeredocDelimiterNaming:
-  Blacklist:
-    - END
-    - !ruby/regexp '/EO[A-Z]{1}/'
-
-Naming/HeredocDelimiterCase:
-  EnforcedStyle: uppercase
-  SupportedStyles:
-    - lowercase
-    - uppercase
-
-Naming/MethodName:
-  EnforcedStyle: snake_case
-  SupportedStyles:
-    - snake_case
-    - camelCase
-
-Naming/PredicateName:
-  # Predicate name prefixes.
-  NamePrefix:
-    - is_
-    - has_
-    - have_
-  # Predicate name prefixes that should be removed.
-  NamePrefixBlacklist:
-    - is_
-    - has_
-    - have_
-  # Predicate names which, despite having a blacklisted prefix, or no `?`,
-  # should still be accepted
-  NameWhitelist:
-    - is_a?
-  # Method definition macros for dynamically generated methods.
-  MethodDefinitionMacros:
-    - define_method
-    - define_singleton_method
-  # Exclude Rspec specs because there is a strong convention to write spec
-  # helpers in the form of `have_something` or `be_something`.
-  Exclude:
-    - 'spec/**/*'
-
-Naming/UncommunicativeBlockParamName:
-  # Parameter names may be equal to or greater than this value
-  MinNameLength: 1
-  AllowNamesEndingInNumbers: true
-  # Whitelisted names that will not register an offense
-  AllowedNames: []
-  # Blacklisted names that will register an offense
-  ForbiddenNames: []
-
-Naming/UncommunicativeMethodParamName:
-  # Parameter names may be equal to or greater than this value
-  MinNameLength: 3
-  AllowNamesEndingInNumbers: true
-  # Whitelisted names that will not register an offense
-  AllowedNames:
-    - io
-    - id
-    - to
-    - by
-    - 'on'
-    - in
-    - at
-  # Blacklisted names that will register an offense
-  ForbiddenNames: []
-
-Naming/VariableName:
-  EnforcedStyle: snake_case
-  SupportedStyles:
-    - snake_case
-    - camelCase
-
-Naming/VariableNumber:
-  EnforcedStyle: normalcase
-  SupportedStyles:
-    - snake_case
-    - normalcase
-    - non_integer
-
-#################### Style ###########################
-
-Style/Alias:
-  EnforcedStyle: prefer_alias
-  SupportedStyles:
-    - prefer_alias
-    - prefer_alias_method
-
-Style/AndOr:
-  # Whether `and` and `or` are banned only in conditionals (conditionals)
-  # or completely (always).
-  EnforcedStyle: always
-  SupportedStyles:
-    - always
-    - conditionals
-
-Style/AsciiComments:
-  AllowedChars: []
-
-# Checks if usage of `%()` or `%Q()` matches configuration.
-Style/BarePercentLiterals:
-  EnforcedStyle: bare_percent
-  SupportedStyles:
-    - percent_q
-    - bare_percent
-
-Style/BlockDelimiters:
-  EnforcedStyle: line_count_based
-  SupportedStyles:
-    # The `line_count_based` style enforces braces around single line blocks and
-    # do..end around multi-line blocks.
-    - line_count_based
-    # The `semantic` style enforces braces around functional blocks, where the
-    # primary purpose of the block is to return a value and do..end for
-    # procedural blocks, where the primary purpose of the block is its
-    # side-effects.
-    #
-    # This looks at the usage of a block's method to determine its type (e.g. is
-    # the result of a `map` assigned to a variable or passed to another
-    # method) but exceptions are permitted in the `ProceduralMethods`,
-    # `FunctionalMethods` and `IgnoredMethods` sections below.
-    - semantic
-    # The `braces_for_chaining` style enforces braces around single line blocks
-    # and do..end around multi-line blocks, except for multi-line blocks whose
-    # return value is being chained with another method (in which case braces
-    # are enforced).
-    - braces_for_chaining
-  ProceduralMethods:
-    # Methods that are known to be procedural in nature but look functional from
-    # their usage, e.g.
-    #
-    #   time = Benchmark.realtime do
-    #     foo.bar
-    #   end
-    #
-    # Here, the return value of the block is discarded but the return value of
-    # `Benchmark.realtime` is used.
-    - benchmark
-    - bm
-    - bmbm
-    - create
-    - each_with_object
-    - measure
-    - new
-    - realtime
-    - tap
-    - with_object
-  FunctionalMethods:
-    # Methods that are known to be functional in nature but look procedural from
-    # their usage, e.g.
-    #
-    #   let(:foo) { Foo.new }
-    #
-    # Here, the return value of `Foo.new` is used to define a `foo` helper but
-    # doesn't appear to be used from the return value of `let`.
-    - let
-    - let!
-    - subject
-    - watch
-  IgnoredMethods:
-    # Methods that can be either procedural or functional and cannot be
-    # categorised from their usage alone, e.g.
-    #
-    #   foo = lambda do |x|
-    #     puts "Hello, #{x}"
-    #   end
-    #
-    #   foo = lambda do |x|
-    #     x * 100
-    #   end
-    #
-    # Here, it is impossible to tell from the return value of `lambda` whether
-    # the inner block's return value is significant.
-    - lambda
-    - proc
-    - it
-
-Style/BracesAroundHashParameters:
-  EnforcedStyle: no_braces
-  SupportedStyles:
-    # The `braces` style enforces braces around all method parameters that are
-    # hashes.
-    - braces
-    # The `no_braces` style checks that the last parameter doesn't have braces
-    # around it.
-    - no_braces
-    # The `context_dependent` style checks that the last parameter doesn't have
-    # braces around it, but requires braces if the second to last parameter is
-    # also a hash literal.
-    - context_dependent
-
-Style/ClassAndModuleChildren:
-  # Checks the style of children definitions at classes and modules.
-  #
-  # Basically there are two different styles:
-  #
-  # `nested` - have each child on a separate line
-  #   class Foo
-  #     class Bar
-  #     end
-  #   end
-  #
-  # `compact` - combine definitions as much as possible
-  #   class Foo::Bar
-  #   end
-  #
-  # The compact style is only forced, for classes or modules with one child.
-  EnforcedStyle: nested
-  SupportedStyles:
-    - nested
-    - compact
-
-Style/ClassCheck:
-  EnforcedStyle: is_a?
-  SupportedStyles:
-    - is_a?
-    - kind_of?
-
-# Align with the style guide.
-Style/CollectionMethods:
-  # Mapping from undesired method to desired_method
-  # e.g. to use `detect` over `find`:
-  #
-  # CollectionMethods:
-  #   PreferredMethods:
-  #     find: detect
-  PreferredMethods:
-    collect: 'map'
-    collect!: 'map!'
-    inject: 'reduce'
-    detect: 'find'
-    find_all: 'select'
-
-# Use '`' or '%x' around command literals.
-Style/CommandLiteral:
-  EnforcedStyle: backticks
-  # backticks: Always use backticks.
-  # percent_x: Always use `%x`.
-  # mixed: Use backticks on single-line commands, and `%x` on multi-line commands.
-  SupportedStyles:
-    - backticks
-    - percent_x
-    - mixed
-  # If `false`, the cop will always recommend using `%x` if one or more backticks
-  # are found in the command string.
-  AllowInnerBackticks: false
-
-# Checks formatting of special comments
-Style/CommentAnnotation:
-  Keywords:
-    - TODO
-    - FIXME
-    - OPTIMIZE
-    - HACK
-    - REVIEW
-
-Style/ConditionalAssignment:
-  EnforcedStyle: assign_to_condition
-  SupportedStyles:
-    - assign_to_condition
-    - assign_inside_condition
-  # When configured to `assign_to_condition`, `SingleLineConditionsOnly`
-  # will only register an offense when all branches of a condition are
-  # a single line.
-  # When configured to `assign_inside_condition`, `SingleLineConditionsOnly`
-  # will only register an offense for assignment to a condition that has
-  # at least one multiline branch.
-  SingleLineConditionsOnly: true
-  IncludeTernaryExpressions: true
-
-# Checks that you have put a copyright in a comment before any code.
-#
-# You can override the default Notice in your .rubocop.yml file.
-#
-# In order to use autocorrect, you must supply a value for the
-# `AutocorrectNotice` key that matches the regexp Notice.  A blank
-# `AutocorrectNotice` will cause an error during autocorrect.
-#
-# Autocorrect will add a copyright notice in a comment at the top
-# of the file immediately after any shebang or encoding comments.
-#
-# Example rubocop.yml:
-#
-# Style/Copyright:
-#   Enabled: true
-#   Notice: 'Copyright (\(c\) )?2015 Yahoo! Inc'
-#   AutocorrectNotice: '# Copyright (c) 2015 Yahoo! Inc.'
-#
-Style/Copyright:
-  Notice: '^Copyright (\(c\) )?2[0-9]{3} .+'
-  AutocorrectNotice: ''
-
-Style/DocumentationMethod:
-  RequireForNonPublicMethods: false
-
-# Warn on empty else statements
-# empty - warn only on empty `else`
-# nil - warn on `else` with nil in it
-# both - warn on empty `else` and `else` with `nil` in it
-Style/EmptyElse:
-  EnforcedStyle: both
-  SupportedStyles:
-    - empty
-    - nil
-    - both
-
-Style/EmptyMethod:
-  EnforcedStyle: compact
-  SupportedStyles:
-    - compact
-    - expanded
-
-# Checks use of for or each in multiline loops.
-Style/For:
-  EnforcedStyle: each
-  SupportedStyles:
-    - each
-    - for
-
-# Enforce the method used for string formatting.
-Style/FormatString:
-  EnforcedStyle: format
-  SupportedStyles:
-    - format
-    - sprintf
-    - percent
-
-# Enforce using either `%<token>s` or `%{token}`
-Style/FormatStringToken:
-  EnforcedStyle: annotated
-  SupportedStyles:
-    # Prefer tokens which contain a sprintf like type annotation like
-    # `%<name>s`, `%<age>d`, `%<score>f`
-    - annotated
-    # Prefer simple looking "template" style tokens like `%{name}`, `%{age}`
-    - template
-    - unannotated
-
-Style/FrozenStringLiteralComment:
-  EnforcedStyle: when_needed
-  SupportedStyles:
-    # `when_needed` will add the frozen string literal comment to files
-    # only when the `TargetRubyVersion` is set to 2.3+.
-    - when_needed
-    # `always` will always add the frozen string literal comment to a file
-    # regardless of the Ruby version or if `freeze` or `<<` are called on a
-    # string literal. If you run code against multiple versions of Ruby, it is
-    # possible that this will create errors in Ruby 2.3.0+.
-    - always
-    # `never` will enforce that the frozen string literal comment does not
-    # exist in a file.
-    - never
-
-# Built-in global variables are allowed by default.
-Style/GlobalVars:
-  AllowedVariables: []
-
-# `MinBodyLength` defines the number of lines of the a body of an `if` or `unless`
-# needs to have to trigger this cop
-Style/GuardClause:
-  MinBodyLength: 1
-
-Style/HashSyntax:
-  EnforcedStyle: ruby19
-  SupportedStyles:
-    # checks for 1.9 syntax (e.g. {a: 1}) for all symbol keys
-    - ruby19
-    # checks for hash rocket syntax for all hashes
-    - hash_rockets
-    # forbids mixed key syntaxes (e.g. {a: 1, :b => 2})
-    - no_mixed_keys
-    # enforces both ruby19 and no_mixed_keys styles
-    - ruby19_no_mixed_keys
-  # Force hashes that have a symbol value to use hash rockets
-  UseHashRocketsWithSymbolValues: false
-  # Do not suggest { a?: 1 } over { :a? => 1 } in ruby19 style
-  PreferHashRocketsForNonAlnumEndingSymbols: false
-
-Style/InverseMethods:
-  # `InverseMethods` are methods that can be inverted by a not (`not` or `!`)
-  # The relationship of inverse methods only needs to be defined in one direction.
-  # Keys and values both need to be defined as symbols.
-  InverseMethods:
-    :any?: :none?
-    :even?: :odd?
-    :==: :!=
-    :=~: :!~
-    :<: :>=
-    :>: :<=
-    # `ActiveSupport` defines some common inverse methods. They are listed below,
-    # and not enabled by default.
-    #:present?: :blank?,
-    #:include?: :exclude?
-  # `InverseBlocks` are methods that are inverted by inverting the return
-  # of the block that is passed to the method
-  InverseBlocks:
-    :select: :reject
-    :select!: :reject!
-
-Style/Lambda:
-  EnforcedStyle: line_count_dependent
-  SupportedStyles:
-    - line_count_dependent
-    - lambda
-    - literal
-
-Style/LambdaCall:
-  EnforcedStyle: call
-  SupportedStyles:
-    - call
-    - braces
-
-Style/MethodCallWithArgsParentheses:
-  IgnoreMacros: true
-  IgnoredMethods: []
-
-Style/MethodDefParentheses:
-  EnforcedStyle: require_parentheses
-  SupportedStyles:
-    - require_parentheses
-    - require_no_parentheses
-    - require_no_parentheses_except_multiline
-
-Style/MissingElse:
-  EnforcedStyle: both
-  SupportedStyles:
-    # if - warn when an if expression is missing an else branch
-    # case - warn when a case expression is missing an else branch
-    # both - warn when an if or case expression is missing an else branch
-    - if
-    - case
-    - both
-
-# Checks the grouping of mixins (`include`, `extend`, `prepend`) in `class` and
-# `module` bodies.
-Style/MixinGrouping:
-  EnforcedStyle: separated
-  SupportedStyles:
-    # separated: each mixed in module goes in a separate statement.
-    # grouped: mixed in modules are grouped into a single statement.
-    - separated
-    - grouped
-
-Style/ModuleFunction:
-  EnforcedStyle: module_function
-  SupportedStyles:
-    - module_function
-    - extend_self
-
-Style/MultilineMemoization:
-  EnforcedStyle: keyword
-  SupportedStyles:
-    - keyword
-    - braces
-
-Style/NegatedIf:
-  EnforcedStyle: both
-  SupportedStyles:
-    # both: prefix and postfix negated `if` should both use `unless`
-    # prefix: only use `unless` for negated `if` statements positioned before the body of the statement
-    # postfix: only use `unless` for negated `if` statements positioned after the body of the statement
-    - both
-    - prefix
-    - postfix
-
-Style/NestedParenthesizedCalls:
-  Whitelist:
-    - be
-    - be_a
-    - be_an
-    - be_between
-    - be_falsey
-    - be_kind_of
-    - be_instance_of
-    - be_truthy
-    - be_within
-    - eq
-    - eql
-    - end_with
-    - include
-    - match
-    - raise_error
-    - respond_to
-    - start_with
-
-Style/Next:
-  # With `always` all conditions at the end of an iteration needs to be
-  # replaced by next - with `skip_modifier_ifs` the modifier if like this one
-  # are ignored: [1, 2].each { |a| return 'yes' if a == 1 }
-  EnforcedStyle: skip_modifier_ifs
-  # `MinBodyLength` defines the number of lines of the a body of an `if` or `unless`
-  # needs to have to trigger this cop
-  MinBodyLength: 3
-  SupportedStyles:
-    - skip_modifier_ifs
-    - always
-
-Style/NonNilCheck:
-  # With `IncludeSemanticChanges` set to `true`, this cop reports offenses for
-  # `!x.nil?` and autocorrects that and `x != nil` to solely `x`, which is
-  # **usually** OK, but might change behavior.
-  #
-  # With `IncludeSemanticChanges` set to `false`, this cop does not report
-  # offenses for `!x.nil?` and does no changes that might change behavior.
-  IncludeSemanticChanges: false
-
-Style/NumericLiterals:
-  MinDigits: 5
-  Strict: false
-
-Style/NumericLiteralPrefix:
-  EnforcedOctalStyle: zero_with_o
-  SupportedOctalStyles:
-    - zero_with_o
-    - zero_only
-
-Style/NumericPredicate:
-  EnforcedStyle: predicate
-  SupportedStyles:
-    - predicate
-    - comparison
-  # Exclude RSpec specs because assertions like `expect(1).to be > 0` cause
-  # false positives.
-  Exclude:
-    - 'spec/**/*'
-
-Style/OptionHash:
-  # A list of parameter names that will be flagged by this cop.
-  SuspiciousParamNames:
-    - options
-    - opts
-    - args
-    - params
-    - parameters
-
-# Allow safe assignment in conditions.
-Style/ParenthesesAroundCondition:
-  AllowSafeAssignment: true
-
-Style/PercentLiteralDelimiters:
-  # Specify the default preferred delimiter for all types with the 'default' key
-  # Override individual delimiters (even with default specified) by specifying
-  # an individual key
-  PreferredDelimiters:
-    default: ()
-    '%i': '[]'
-    '%I': '[]'
-    '%r': '{}'
-    '%w': '[]'
-    '%W': '[]'
-
-Style/PercentQLiterals:
-  EnforcedStyle: lower_case_q
-  SupportedStyles:
-    - lower_case_q # Use `%q` when possible, `%Q` when necessary
-    - upper_case_q # Always use `%Q`
-
-Style/PreferredHashMethods:
-  EnforcedStyle: short
-  SupportedStyles:
-    - short
-    - verbose
-
-Style/RaiseArgs:
-  EnforcedStyle: exploded
-  SupportedStyles:
-    - compact # raise Exception.new(msg)
-    - exploded # raise Exception, msg
-
-Style/RedundantReturn:
-  # When `true` allows code like `return x, y`.
-  AllowMultipleReturnValues: false
-
-# Use `/` or `%r` around regular expressions.
-Style/RegexpLiteral:
-  EnforcedStyle: slashes
-  # slashes: Always use slashes.
-  # percent_r: Always use `%r`.
-  # mixed: Use slashes on single-line regexes, and `%r` on multi-line regexes.
-  SupportedStyles:
-    - slashes
-    - percent_r
-    - mixed
-  # If `false`, the cop will always recommend using `%r` if one or more slashes
-  # are found in the regexp string.
-  AllowInnerSlashes: false
-
-Style/RescueStandardError:
-  EnforcedStyle: explicit
-  # implicit: Do not include the error class, `rescue`
-  # explicit: Require an error class `rescue StandardError`
-  SupportedStyles:
-    - implicit
-    - explicit
-
-Style/ReturnNil:
-  EnforcedStyle: return
-  SupportedStyles:
-    - return
-    - return_nil
-
-Style/SafeNavigation:
-  # Safe navigation may cause a statement to start returning `nil` in addition
-  # to whatever it used to return.
-  ConvertCodeThatCanStartToReturnNil: false
-  Whitelist:
-    - present?
-    - blank?
-    - presence
-    - try
-
-Style/Semicolon:
-  # Allow `;` to separate several expressions on the same line.
-  AllowAsExpressionSeparator: false
-
-Style/SignalException:
-  EnforcedStyle: only_raise
-  SupportedStyles:
-    - only_raise
-    - only_fail
-    - semantic
-
-Style/SingleLineBlockParams:
-  Methods:
-    - reduce:
-        - acc
-        - elem
-    - inject:
-        - acc
-        - elem
-
-Style/SingleLineMethods:
-  AllowIfMethodIsEmpty: true
-
-Style/SpecialGlobalVars:
-  EnforcedStyle: use_english_names
-  SupportedStyles:
-    - use_perl_names
-    - use_english_names
-
-Style/StabbyLambdaParentheses:
-  EnforcedStyle: require_parentheses
-  SupportedStyles:
-    - require_parentheses
-    - require_no_parentheses
-
-Style/StringLiterals:
-  EnforcedStyle: single_quotes
-  SupportedStyles:
-    - single_quotes
-    - double_quotes
-  # If `true`, strings which span multiple lines using `\` for continuation must
-  # use the same type of quotes on each line.
-  ConsistentQuotesInMultiline: false
-
-Style/StringLiteralsInInterpolation:
-  EnforcedStyle: single_quotes
-  SupportedStyles:
-    - single_quotes
-    - double_quotes
-
-Style/StringMethods:
-  # Mapping from undesired method to desired_method
-  # e.g. to use `to_sym` over `intern`:
-  #
-  # StringMethods:
-  #   PreferredMethods:
-  #     intern: to_sym
-  PreferredMethods:
-    intern: to_sym
-
-Style/SymbolArray:
-  EnforcedStyle: percent
-  MinSize: 0
-  SupportedStyles:
-    - percent
-    - brackets
-
-Style/SymbolProc:
-  # A list of method names to be ignored by the check.
-  # The names should be fairly unique, otherwise you'll end up ignoring lots of code.
-  IgnoredMethods:
-    - respond_to
-    - define_method
-
-Style/TernaryParentheses:
-  EnforcedStyle: require_no_parentheses
-  SupportedStyles:
-    - require_parentheses
-    - require_no_parentheses
-    - require_parentheses_when_complex
-  AllowSafeAssignment: true
-
-Style/TrailingCommaInArguments:
-  # If `comma`, the cop requires a comma after the last argument, but only for
-  # parenthesized method calls where each argument is on its own line.
-  # If `consistent_comma`, the cop requires a comma after the last argument,
-  # for all parenthesized method calls with arguments.
-  EnforcedStyleForMultiline: no_comma
-  SupportedStylesForMultiline:
-    - comma
-    - consistent_comma
-    - no_comma
-
-Style/TrailingCommaInArrayLiteral:
-  # If `comma`, the cop requires a comma after the last item in an array,
-  # but only when each item is on its own line.
-  # If `consistent_comma`, the cop requires a comma after the last item of all
-  # non-empty array literals.
-  EnforcedStyleForMultiline: no_comma
-  SupportedStylesForMultiline:
-    - comma
-    - consistent_comma
-    - no_comma
-
-Style/TrailingCommaInHashLiteral:
-  # If `comma`, the cop requires a comma after the last item in a hash,
-  # but only when each item is on its own line.
-  # If `consistent_comma`, the cop requires a comma after the last item of all
-  # non-empty hash literals.
-  EnforcedStyleForMultiline: no_comma
-  SupportedStylesForMultiline:
-    - comma
-    - consistent_comma
-    - no_comma
-
-# `TrivialAccessors` requires exact name matches and doesn't allow
-# predicated methods by default.
-Style/TrivialAccessors:
-  # When set to `false` the cop will suggest the use of accessor methods
-  # in situations like:
-  #
-  # def name
-  #   @other_name
-  # end
-  #
-  # This way you can uncover "hidden" attributes in your code.
-  ExactNameMatch: true
-  AllowPredicates: true
-  # Allows trivial writers that don't end in an equal sign. e.g.
-  #
-  # def on_exception(action)
-  #   @on_exception=action
-  # end
-  # on_exception :restart
-  #
-  # Commonly used in DSLs
-  AllowDSLWriters: false
-  IgnoreClassMethods: false
-  Whitelist:
-    - to_ary
-    - to_a
-    - to_c
-    - to_enum
-    - to_h
-    - to_hash
-    - to_i
-    - to_int
-    - to_io
-    - to_open
-    - to_path
-    - to_proc
-    - to_r
-    - to_regexp
-    - to_str
-    - to_s
-    - to_sym
-
-# `WordArray` enforces how array literals of word-like strings should be expressed.
-Style/WordArray:
-  EnforcedStyle: percent
-  SupportedStyles:
-    # percent style: %w(word1 word2)
-    - percent
-    # bracket style: ['word1', 'word2']
-    - brackets
-  # The `MinSize` option causes the `WordArray` rule to be ignored for arrays
-  # smaller than a certain size.  The rule is only applied to arrays
-  # whose element count is greater than or equal to `MinSize`.
-  MinSize: 0
-  # The regular expression `WordRegex` decides what is considered a word.
-  WordRegex: !ruby/regexp '/\A[\p{Word}\n\t]+\z/'
-
-Style/YodaCondition:
-  EnforcedStyle: all_comparison_operators
-  SupportedStyles:
-    # check all comparison operators
-    - all_comparison_operators
-    # check only equality operators: `!=` and `==`
-    - equality_operators_only
-
-#################### Metrics ###############################
-
-Metrics/AbcSize:
-  # The ABC size is a calculated magnitude, so this number can be an Integer or
-  # a Float.
-  Max: 15
-
-Metrics/BlockLength:
-  CountComments: false  # count full line comments?
-  Max: 25
-  ExcludedMethods: []
-
-Metrics/BlockNesting:
-  CountBlocks: false
-  Max: 3
-
-Metrics/ClassLength:
-  CountComments: false  # count full line comments?
-  Max: 100
-
-# Avoid complex methods.
-Metrics/CyclomaticComplexity:
-  Max: 6
-
-Metrics/LineLength:
-  Max: 80
-  # To make it possible to copy or click on URIs in the code, we allow lines
-  # containing a URI to be longer than Max.
-  AllowHeredoc: true
-  AllowURI: true
-  URISchemes:
-    - http
-    - https
-  # The IgnoreCopDirectives option causes the LineLength rule to ignore cop
-  # directives like '# rubocop: enable ...' when calculating a line's length.
-  IgnoreCopDirectives: false
-  # The IgnoredPatterns option is a list of !ruby/regexp and/or string
-  # elements. Strings will be converted to Regexp objects. A line that matches
-  # any regular expression listed in this option will be ignored by LineLength.
-  IgnoredPatterns: []
-
-Metrics/MethodLength:
-  CountComments: false  # count full line comments?
-  Max: 10
-
-Metrics/ModuleLength:
-  CountComments: false  # count full line comments?
-  Max: 100
-
-Metrics/ParameterLists:
-  Max: 5
-  CountKeywordArgs: true
-
-Metrics/PerceivedComplexity:
-  Max: 7
-
-#################### Lint ##################################
-
-# Allow safe assignment in conditions.
-Lint/AssignmentInCondition:
-  AllowSafeAssignment: true
-
-Lint/InheritException:
-  # The default base class in favour of `Exception`.
-  EnforcedStyle: runtime_error
-  SupportedStyles:
-    - runtime_error
-    - standard_error
-
-Lint/MissingCopEnableDirective:
-  # Maximum number of consecutive lines the cop can be disabled for.
-  # 0 allows only single-line disables
-  # 1 would mean the maximum allowed is the following:
-  #   # rubocop:disable SomeCop
-  #   a = 1
-  #   # rubocop:enable SomeCop
-  # .inf for any size
-  MaximumRangeSize: .inf
-
-Lint/SafeNavigationChain:
-  Whitelist:
-    - present?
-    - blank?
-    - presence
-    - try
-
-# Checks for shadowed arguments
-Lint/ShadowedArgument:
-  IgnoreImplicitReferences: false
-
-# Checks for unused block arguments
-Lint/UnusedBlockArgument:
-  IgnoreEmptyBlocks: true
-  AllowUnusedKeywordArguments: false
-
-# Checks for unused method arguments.
-Lint/UnusedMethodArgument:
-  AllowUnusedKeywordArguments: false
-  IgnoreEmptyMethods: true
-
-Lint/Void:
-  CheckForMethodsWithNoSideEffects: false
-
-#################### Performance ###########################
-
-Performance/DoubleStartEndWith:
-  # Used to check for `starts_with?` and `ends_with?`.
-  # These methods are defined by `ActiveSupport`.
-  IncludeActiveSupportAliases: false
-
-Performance/RedundantMerge:
-  # Max number of key-value pairs to consider an offense
-  MaxKeyValuePairs: 2
-
-#################### Rails #################################
-
-Rails/ActionFilter:
-  EnforcedStyle: action
-  SupportedStyles:
-    - action
-    - filter
-  Include:
-    - app/controllers/**/*.rb
-
-Rails/CreateTableWithTimestamps:
-  Include:
-    - db/migrate/*.rb
-
-Rails/Date:
-  # The value `strict` disallows usage of `Date.today`, `Date.current`,
-  # `Date#to_time` etc.
-  # The value `flexible` allows usage of `Date.current`, `Date.yesterday`, etc
-  # (but not `Date.today`) which are overridden by ActiveSupport to handle current
-  # time zone.
-  EnforcedStyle: flexible
-  SupportedStyles:
-    - strict
-    - flexible
-
-Rails/Delegate:
-  # When set to true, using the target object as a prefix of the
-  # method name without using the `delegate` method will be a
-  # violation. When set to false, this case is legal.
-  EnforceForPrefixed: true
-
-Rails/DynamicFindBy:
-  Whitelist:
-    - find_by_sql
-
-Rails/EnumUniqueness:
-  Include:
-    - app/models/**/*.rb
-
-Rails/Exit:
-  Include:
-    - app/**/*.rb
-    - config/**/*.rb
-    - lib/**/*.rb
-  Exclude:
-    - lib/**/*.rake
-
-Rails/FindBy:
-  Include:
-    - app/models/**/*.rb
-
-Rails/FindEach:
-  Include:
-    - app/models/**/*.rb
-
-Rails/HasAndBelongsToMany:
-  Include:
-    - app/models/**/*.rb
-
-Rails/HasManyOrHasOneDependent:
-  Include:
-    - app/models/**/*.rb
-
-Rails/HttpStatus:
-  EnforcedStyle: symbolic
-  SupportedStyles:
-    - numeric
-    - symbolic
-
-Rails/InverseOf:
-  Include:
-    - app/models/**/*.rb
-
-Rails/LexicallyScopedActionFilter:
-  Include:
-    - app/controllers/**/*.rb
-
-Rails/NotNullColumn:
-  Include:
-    - db/migrate/*.rb
-
-Rails/Output:
-  Include:
-    - app/**/*.rb
-    - config/**/*.rb
-    - db/**/*.rb
-    - lib/**/*.rb
-
-Rails/ReadWriteAttribute:
-  Include:
-    - app/models/**/*.rb
-
-Rails/RequestReferer:
-  EnforcedStyle: referer
-  SupportedStyles:
-    - referer
-    - referrer
-
-Rails/ReversibleMigration:
-  Include:
-    - db/migrate/*.rb
-
-Rails/SafeNavigation:
-  # This will convert usages of `try` to use safe navigation as well as `try!`.
-  # `try` and `try!` work slightly differently. `try!` and safe navigation will
-  # both raise a `NoMethodError` if the receiver of the method call does not
-  # implement the intended method. `try` will not raise an exception for this.
-  ConvertTry: false
-
-Rails/ScopeArgs:
-  Include:
-    - app/models/**/*.rb
-
-Rails/TimeZone:
-  # The value `strict` means that `Time` should be used with `zone`.
-  # The value `flexible` allows usage of `in_time_zone` instead of `zone`.
-  EnforcedStyle: flexible
-  SupportedStyles:
-    - strict
-    - flexible
-
-Rails/UniqBeforePluck:
-  EnforcedStyle: conservative
-  SupportedStyles:
-    - conservative
-    - aggressive
-  AutoCorrect: false
-
-Rails/UnknownEnv:
-  Environments:
-    - development
-    - test
-    - production
-
-Rails/SkipsModelValidations:
-  Blacklist:
-    - decrement!
-    - decrement_counter
-    - increment!
-    - increment_counter
-    - toggle!
-    - touch
-    - update_all
-    - update_attribute
-    - update_column
-    - update_columns
-    - update_counters
-
-Rails/Validation:
-  Include:
-    - app/models/**/*.rb
-
-Bundler/OrderedGems:
-  TreatCommentsAsGroupSeparators: true
-
-Gemspec/OrderedDependencies:
-  TreatCommentsAsGroupSeparators: true