scram 0.1.0

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,51 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable/disable caching. By default caching is disabled.
+  if Rails.root.join('tmp/caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => 'public, max-age=172800'
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  config.action_mailer.perform_caching = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Suppress logger output for asset requests.
+  config.assets.quiet = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # Use an evented file watcher to asynchronously detect changes in source code,
+  # routes, locales, etc. This feature depends on the listen gem.
+  # config.file_watcher = ActiveSupport::EventedFileUpdateChecker
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,83 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Mount Action Cable outside main process or domain
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = 'wss://example.com/cable'
+  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  config.log_tags = [ :request_id ]
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Use a real queuing backend for Active Job (and separate queues per environment)
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "dummy_#{Rails.env}"
+  config.action_mailer.perform_caching = false
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require 'syslog/logger'
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger = ActiveSupport::TaggedLogging.new(logger)
+  end
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => 'public, max-age=3600'
+  }
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+  config.action_mailer.perform_caching = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/initializers/application_controller_renderer.rb

@@ -0,0 +1,6 @@
+# Be sure to restart your server when you modify this file.
+
+# ApplicationController.renderer.defaults.merge!(
+#   http_host: 'example.org',
+#   https: false
+# )

data/spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Specify a serializer for the signed and encrypted cookie jars.
+# Valid options are :json, :marshal, and :hybrid.
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/spec/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/spec/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/spec/dummy/config/initializers/new_framework_defaults.rb

@@ -0,0 +1,21 @@
+# Be sure to restart your server when you modify this file.
+#
+# This file contains migration options to ease your Rails 5.0 upgrade.
+#
+# Read the Guide for Upgrading Ruby on Rails for more info on each option.
+
+# Enable per-form CSRF tokens. Previous versions had false.
+Rails.application.config.action_controller.per_form_csrf_tokens = true
+
+# Enable origin-checking CSRF mitigation. Previous versions had false.
+Rails.application.config.action_controller.forgery_protection_origin_check = true
+
+# Make Ruby 2.4 preserve the timezone of the receiver when calling `to_time`.
+# Previous versions had false.
+ActiveSupport.to_time_preserves_timezone = true
+
+# Do not halt callback chains when a callback returns false. Previous versions had true.
+ActiveSupport.halt_callback_chains_on_return_false = false
+
+# Configure SSL options to enable HSTS with subdomains. Previous versions had false.
+Rails.application.config.ssl_options = { hsts: { subdomains: true } }

data/spec/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,9 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json]
+end

data/spec/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/spec/dummy/config/mongoid.yml

@@ -0,0 +1,147 @@
+development:
+  # Configure available database clients. (required)
+  clients:
+    # Defines the default client. (required)
+    default:
+      # Defines the name of the default database that Mongoid can connect to.
+      # (required).
+      database: scram_dummy_development
+      # Provides the hosts the default client can connect to. Must be an array
+      # of host:port pairs. (required)
+      hosts:
+        - localhost:27017
+      options:
+        # Change the default write concern. (default = { w: 1 })
+        # write:
+        #   w: 1
+
+        # Change the default read preference. Valid options for mode are: :secondary,
+        # :secondary_preferred, :primary, :primary_preferred, :nearest
+        # (default: primary)
+        # read:
+        #   mode: :secondary_preferred
+        #   tag_sets:
+        #     - use: web
+
+        # The name of the user for authentication.
+        # user: 'user'
+
+        # The password of the user for authentication.
+        # password: 'password'
+
+        # The user's database roles.
+        # roles:
+        #   - 'dbOwner'
+
+        # Change the default authentication mechanism. Valid options are: :scram,
+        # :mongodb_cr, :mongodb_x509, and :plain. (default on 3.0 is :scram, default
+        # on 2.4 and 2.6 is :plain)
+        # auth_mech: :scram
+
+        # The database or source to authenticate the user against.
+        # (default: the database specified above or admin)
+        # auth_source: admin
+
+        # Force a the driver cluster to behave in a certain manner instead of auto-
+        # discovering. Can be one of: :direct, :replica_set, :sharded. Set to :direct
+        # when connecting to hidden members of a replica set.
+        # connect: :direct
+
+        # Changes the default time in seconds the server monitors refresh their status
+        # via ismaster commands. (default: 10)
+        # heartbeat_frequency: 10
+
+        # The time in seconds for selecting servers for a near read preference. (default: 0.015)
+        # local_threshold: 0.015
+
+        # The timeout in seconds for selecting a server for an operation. (default: 30)
+        # server_selection_timeout: 30
+
+        # The maximum number of connections in the connection pool. (default: 5)
+        # max_pool_size: 5
+
+        # The minimum number of connections in the connection pool. (default: 1)
+        # min_pool_size: 1
+
+        # The time to wait, in seconds, in the connection pool for a connection
+        # to be checked in before timing out. (default: 5)
+        # wait_queue_timeout: 5
+
+        # The time to wait to establish a connection before timing out, in seconds.
+        # (default: 5)
+        # connect_timeout: 5
+
+        # The timeout to wait to execute operations on a socket before raising an error.
+        # (default: 5)
+        # socket_timeout: 5
+
+        # The name of the replica set to connect to. Servers provided as seeds that do
+        # not belong to this replica set will be ignored.
+        # replica_set: name
+
+        # Whether to connect to the servers via ssl. (default: false)
+        # ssl: true
+
+        # The certificate file used to identify the connection against MongoDB.
+        # ssl_cert: /path/to/my.cert
+
+        # The private keyfile used to identify the connection against MongoDB.
+        # Note that even if the key is stored in the same file as the certificate,
+        # both need to be explicitly specified.
+        # ssl_key: /path/to/my.key
+
+        # A passphrase for the private key.
+        # ssl_key_pass_phrase: password
+
+        # Whether or not to do peer certification validation. (default: true)
+        # ssl_verify: true
+
+        # The file containing a set of concatenated certification authority certifications
+        # used to validate certs passed from the other end of the connection.
+        # ssl_ca_cert: /path/to/ca.cert
+
+
+  # Configure Mongoid specific options. (optional)
+  options:
+    # Includes the root model name in json serialization. (default: false)
+    # include_root_in_json: false
+
+    # Include the _type field in serialization. (default: false)
+    # include_type_for_serialization: false
+
+    # Preload all models in development, needed when models use
+    # inheritance. (default: false)
+    # preload_models: false
+
+    # Raise an error when performing a #find and the document is not found.
+    # (default: true)
+    # raise_not_found_error: true
+
+    # Raise an error when defining a scope with the same name as an
+    # existing method. (default: false)
+    # scope_overwrite_exception: false
+
+    # Use Active Support's time zone in conversions. (default: true)
+    # use_activesupport_time_zone: true
+
+    # Ensure all times are UTC in the app side. (default: false)
+    # use_utc: false
+
+    # Set the Mongoid and Ruby driver log levels when not in a Rails
+    # environment. The Mongoid logger will be set to the Rails logger
+    # otherwise.(default: :info)
+    # log_level: :info
+
+    # Application name that is printed to the mongodb logs upon establishing a
+    # connection in server versions >= 3.4. Note that the name cannot exceed 128 bytes.
+    # app_name: MyApplicationName
+test:
+  clients:
+    default:
+      database: scram_dummy_test
+      hosts:
+        - localhost:27017
+      options:
+        read:
+          mode: :primary
+        max_pool_size: 1