schleyfox-rgeo 0.2.5

data/lib/rgeo/feature/multi_line_string.rb

@@ -0,0 +1,66 @@
+# -----------------------------------------------------------------------------
+# 
+# MultiLineString feature interface
+# 
+# -----------------------------------------------------------------------------
+# Copyright 2010 Daniel Azuma
+# 
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 
+# * Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# * Neither the name of the copyright holder, nor the names of any other
+#   contributors to this software, may be used to endorse or promote products
+#   derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+;
+
+
+module RGeo
+  
+  module Feature
+    
+    
+    # == SFS 1.1 Description
+    # 
+    # A MultiLineString is a MultiCurve whose elements are LineStrings.
+    # 
+    # == Notes
+    # 
+    # MultiLineString is defined as a module and is provided primarily
+    # for the sake of documentation. Implementations need not necessarily
+    # include this module itself. Therefore, you should not depend on the
+    # kind_of? method to check type. Instead, use the provided check_type
+    # class method (or === operator) defined in the Type module.
+    
+    module MultiLineString
+      
+      extend Type
+      
+      include MultiCurve
+      
+      
+    end
+  
+    
+  end
+  
+end

data/lib/rgeo/feature/multi_point.rb

@@ -0,0 +1,73 @@
+# -----------------------------------------------------------------------------
+# 
+# MultiPoint feature interface
+# 
+# -----------------------------------------------------------------------------
+# Copyright 2010 Daniel Azuma
+# 
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 
+# * Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# * Neither the name of the copyright holder, nor the names of any other
+#   contributors to this software, may be used to endorse or promote products
+#   derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+;
+
+
+module RGeo
+  
+  module Feature
+    
+    
+    # == SFS 1.1 Description
+    # 
+    # A MultiPoint is a 0-dimensional GeometryCollection. The elements of
+    # a MultiPoint are restricted to Points. The Points are not connected
+    # or ordered.
+    # 
+    # A MultiPoint is simple if no two Points in the MultiPoint are equal
+    # (have identical coordinate values).
+    # 
+    # The boundary of a MultiPoint is the empty set.
+    # 
+    # == Notes
+    # 
+    # MultiPoint is defined as a module and is provided primarily
+    # for the sake of documentation. Implementations need not necessarily
+    # include this module itself. Therefore, you should not depend on the
+    # kind_of? method to check type. Instead, use the provided check_type
+    # class method (or === operator) defined in the Type module.
+    
+    module MultiPoint
+      
+      extend Type
+      
+      include GeometryCollection
+      
+      
+    end
+  
+    
+  end
+  
+end

data/lib/rgeo/feature/multi_polygon.rb

@@ -0,0 +1,97 @@
+# -----------------------------------------------------------------------------
+# 
+# MultiPolygon feature interface
+# 
+# -----------------------------------------------------------------------------
+# Copyright 2010 Daniel Azuma
+# 
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 
+# * Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# * Neither the name of the copyright holder, nor the names of any other
+#   contributors to this software, may be used to endorse or promote products
+#   derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+;
+
+
+module RGeo
+  
+  module Feature
+    
+    
+    # == SFS 1.1 Description
+    # 
+    # A MultiPolygon is a MultiSurface whose elements are Polygons.
+    # 
+    # The assertions for MultiPolygons are as follows.
+    # 
+    # a) The interiors of 2 Polygons that are elements of a MultiPolygon
+    # may not intersect.
+    # 
+    # b) The boundaries of any 2 Polygons that are elements of a
+    # MultiPolygon may not "cross" and may touch at only a finite number
+    # of Points. NOTE: Crossing is prevented by assertion (a) above.
+    # 
+    # c) A MultiPolygon is defined as topologically closed.
+    # 
+    # d) A MultiPolygon may not have cut lines, spikes or punctures, a
+    # MultiPolygon is a regular closed Point set:
+    # 
+    # e) The interior of a MultiPolygon with more than 1 Polygon is not
+    # connected, the number of connected components of the interior of a
+    # MultiPolygon is equal to the number of Polygons in the MultiPolygon.
+    # 
+    # The boundary of a MultiPolygon is a set of closed Curves
+    # (LineStrings) corresponding to the boundaries of its element
+    # Polygons. Each Curve in the boundary of the MultiPolygon is in the
+    # boundary of exactly 1 element Polygon, and every Curve in the
+    # boundary of an element Polygon is in the boundary of the
+    # MultiPolygon.
+    # 
+    # NOTE: The subclass of Surface named Polyhedral Surface is a faceted
+    # Surface whose facets are Polygons. A Polyhedral Surface is not a
+    # MultiPolygon because it violates the rule for MultiPolygons that the
+    # boundaries of the element Polygons intersect only at a finite number
+    # of Points.
+    # 
+    # == Notes
+    # 
+    # MultiPolygon is defined as a module and is provided primarily
+    # for the sake of documentation. Implementations need not necessarily
+    # include this module itself. Therefore, you should not depend on the
+    # kind_of? method to check type. Instead, use the provided check_type
+    # class method (or === operator) defined in the Type module.
+    
+    module MultiPolygon
+      
+      extend Type
+      
+      include MultiSurface
+      
+      
+    end
+  
+    
+  end
+  
+end

data/lib/rgeo/feature/multi_surface.rb

@@ -0,0 +1,116 @@
+# -----------------------------------------------------------------------------
+# 
+# MultiSurface feature interface
+# 
+# -----------------------------------------------------------------------------
+# Copyright 2010 Daniel Azuma
+# 
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 
+# * Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# * Neither the name of the copyright holder, nor the names of any other
+#   contributors to this software, may be used to endorse or promote products
+#   derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+;
+
+
+module RGeo
+  
+  module Feature
+    
+    
+    # == SFS 1.1 Description
+    # 
+    # A MultiSurface is a 2-dimensional GeometryCollection whose elements
+    # are Surfaces. The interiors of any two Surfaces in a MultiSurface may
+    # not intersect. The boundaries of any two elements in a MultiSurface
+    # may intersect, at most, at a finite number of Points.
+    # 
+    # MultiSurface is a non-instantiable class in this International
+    # Standard. It defines a set of methods for its subclasses and is
+    # included for reasons of extensibility. The instantiable subclass of
+    # MultiSurface is MultiPolygon, corresponding to a collection of
+    # Polygons.
+    # 
+    # == Notes
+    # 
+    # MultiSurface is defined as a module and is provided primarily
+    # for the sake of documentation. Implementations need not necessarily
+    # include this module itself. Therefore, you should not depend on the
+    # kind_of? method to check type. Instead, use the provided check_type
+    # class method (or === operator) defined in the Type module.
+    
+    module MultiSurface
+      
+      extend Type
+      
+      include GeometryCollection
+      
+      
+      # === SFS 1.1 Description
+      # 
+      # The area of this MultiSurface, as measured in the spatial reference
+      # system of this MultiSurface.
+      # 
+      # === Notes
+      # 
+      # Returns a floating-point scalar value.
+      
+      def area
+        raise Error::UnsupportedOperation, "Method MultiSurface#area not defined."
+      end
+      
+      
+      # === SFS 1.1 Description
+      # 
+      # The mathematical centroid for this MultiSurface as a Point. The
+      # result is not guaranteed to be on this MultiSurface.
+      # 
+      # === Notes
+      # 
+      # Returns an object that supports the Point interface.
+      
+      def centroid
+        raise Error::UnsupportedOperation, "Method MultiSurface#centroid not defined."
+      end
+      
+      
+      # === SFS 1.1 Description
+      # 
+      # A Point guaranteed to be on this MultiSurface.
+      # 
+      # === Notes
+      # 
+      # Returns an object that supports the Point interface.
+      
+      def point_on_surface
+        raise Error::UnsupportedOperation, "Method MultiSurface#point_on_surface not defined."
+      end
+      
+      
+    end
+  
+    
+  end
+  
+end

data/lib/rgeo/feature/point.rb

@@ -0,0 +1,120 @@
+# -----------------------------------------------------------------------------
+# 
+# Point feature interface
+# 
+# -----------------------------------------------------------------------------
+# Copyright 2010 Daniel Azuma
+# 
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# 
+# * Redistributions of source code must retain the above copyright notice,
+#   this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright notice,
+#   this list of conditions and the following disclaimer in the documentation
+#   and/or other materials provided with the distribution.
+# * Neither the name of the copyright holder, nor the names of any other
+#   contributors to this software, may be used to endorse or promote products
+#   derived from this software without specific prior written permission.
+# 
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+# -----------------------------------------------------------------------------
+;
+
+
+module RGeo
+  
+  module Feature
+    
+    
+    # == SFS 1.1 Description
+    # 
+    # A Point is a 0-dimensional geometric object and represents a single
+    # location in coordinate space. A Point has an x-coordinate value and
+    # a y-coordinate value.
+    # 
+    # The boundary of a Point is the empty set.
+    # 
+    # == Notes
+    # 
+    # Point is defined as a module and is provided primarily
+    # for the sake of documentation. Implementations need not necessarily
+    # include this module itself. Therefore, you should not depend on the
+    # kind_of? method to check type. Instead, use the provided check_type
+    # class method (or === operator) defined in the Type module.
+    # 
+    # Some implementations may support higher dimensional points.
+    
+    module Point
+      
+      extend Type
+      
+      include Geometry
+      
+      
+      # === SFS 1.1 Description
+      # 
+      # The x-coordinate value for this Point.
+      # 
+      # === Notes
+      # 
+      # Returns a floating-point scalar value.
+      
+      def x
+        raise Error::UnsupportedOperation, "Method Point#x not defined."
+      end
+      
+      
+      # === SFS 1.1 Description
+      # 
+      # The y-coordinate value for this Point.
+      # 
+      # === Notes
+      # 
+      # Returns a floating-point scalar value.
+      
+      def y
+        raise Error::UnsupportedOperation, "Method Point#y not defined."
+      end
+      
+      
+      # Returns the z-coordinate for this Point as a floating-point
+      # scalar value.
+      # 
+      # This method may not be available if the point's factory does
+      # not support Z coordinates.
+      
+      def z
+        raise Error::UnsupportedOperation, "Method Point#z not defined."
+      end
+      
+      
+      # Returns the m-coordinate for this Point as a floating-point
+      # scalar value.
+      # 
+      # This method may not be available if the point's factory does
+      # not support M coordinates.
+      
+      def m
+        raise Error::UnsupportedOperation, "Method Point#m not defined."
+      end
+      
+      
+    end
+  
+    
+  end
+  
+end