scarpe 0.2.0 → 0.2.2

data/lib/scarpe/unit_test_helpers.rb

@@ -1,163 +0,0 @@
-# frozen_string_literal: true
-
-require "tempfile"
-require "json"
-require "fileutils"
-
-# Helpers here should *not* use Webview-specific functionality.
-# The intention is that these are helpers for various Scarpe display
-# services that do *not* use Webview.
-
-module Scarpe::Test; end
-
-# We want test failures set up once *total*, not per Minitest::Test. So an instance var
-# doesn't do it.
-ALREADY_SET_UP_LOGGED_TEST_FAILURES = { setup: false }
-
-# General helpers for general usage
-module Scarpe::Test::Helpers
-  def with_tempfile(prefix, contents, dir: Dir.tmpdir)
-    t = Tempfile.new(prefix, dir)
-    t.write(contents)
-    t.flush # Make sure the contents are written out
-
-    yield(t.path)
-  ensure
-    t.close
-    t.unlink
-  end
-
-  # Temporarily set env vars for the block of code inside
-  def with_env_vars(envs)
-    old_env = {}
-    envs.each do |k, v|
-      old_env[k] = ENV[k]
-      ENV[k] = v
-    end
-    yield
-  ensure
-    old_env.each { |k, v| ENV[k] = v }
-  end
-end
-
-# This test will save extensive logs in case of test failure.
-# Note that it defines setup/teardown methods. If you want
-# multiple setup/teardowns from multiple places to happen you
-# may need to explictly call (e.g. with logged_test_setup/teardown)
-# to ensure everything you want happens.
-module Scarpe::Test::LoggedTest
-  LOGGER_DIR = File.expand_path("#{__dir__}/../../logger")
-
-  def file_id
-    "#{self.class.name}_#{self.name}"
-  end
-
-  def logged_test_setup
-    # Make sure test failures will be saved at the end of the run.
-    # Delete stale test failures and logging only the *first* time this is called.
-    set_up_test_failures
-
-    @normal_log_config = Scarpe::Logger.current_log_config
-    Scarpe::Logger.configure_logger(log_config_for_test)
-
-    Scarpe::Logger.logger("LoggedScarpeTest").info("Test: #{self.class.name}##{self.name}")
-  end
-
-  # If you include this module and don't override setup/teardown, everything will
-  # work fine. But if you need more setup/teardown steps, you can do that too.
-  def setup
-    logged_test_setup
-  end
-
-  def logged_test_teardown
-    # Restore previous log config
-    Scarpe::Logger.configure_logger(@normal_log_config)
-
-    if self.failure
-      save_failure_logs
-    else
-      remove_unsaved_logs
-    end
-  end
-
-  def teardown
-    logged_test_teardown
-  end
-
-  def log_config_for_test
-    {
-      "default" => ["debug", "logger/test_failure_#{file_id}.log"],
-
-      "WebviewAPI" => ["debug", "logger/test_failure_wv_api_#{file_id}.log"],
-
-      "DisplayService" => ["debug", "logger/test_failure_events_#{file_id}.log"],
-      "WV::RelayDisplayService" => ["debug", "logger/test_failure_events_#{file_id}.log"],
-      "WV::WebviewDisplayService" => ["debug", "logger/test_failure_events_#{file_id}.log"],
-      "WV::ControlInterface" => ["debug", "logger/test_failure_events_#{file_id}.log"],
-    }
-  end
-
-  # This could be a lot simpler except I want to only update the file list in one place,
-  # log_config_for_test(). Having a single spot should (I hope) make it a lot friendlier to
-  # add more logfiles for different components, logged API objects, etc.
-  def saved_log_files
-    lc = log_config_for_test
-    log_outfiles = lc.values.map { |_level, loc| loc }
-    log_outfiles.select { |s| s.start_with?("logger/") }.map { |s| s.delete_prefix("logger/") }
-  end
-
-  def set_up_test_failures
-    return if ALREADY_SET_UP_LOGGED_TEST_FAILURES[:setup]
-
-    ALREADY_SET_UP_LOGGED_TEST_FAILURES[:setup] = true
-    # Delete stale test failures, if any, before starting the first failure-logged test
-    Dir["#{LOGGER_DIR}/test_failure*.log"].each { |fn| File.unlink(fn) }
-
-    Minitest.after_run do
-      # Print test failure notice to console
-      unless Dir["#{LOGGER_DIR}/test_failure*.out.log"].empty?
-        puts "Some tests have failed! See #{LOGGER_DIR}/test_failure*.out.log for test logs!"
-      end
-
-      # Remove un-saved test logs
-      Dir["#{LOGGER_DIR}/test_failure*.log"].each do |f|
-        next if f.include?(".out.log")
-
-        File.unlink(f) if File.exist?(f)
-      end
-    end
-  end
-
-  def logfail_out_loc(filepath)
-    # Add a .out prefix before final .log
-    out_loc = filepath.gsub(%r{.log\Z}, ".out.log")
-
-    if out_loc == filepath
-      raise "Something is wrong! Could not figure out failure-log output path for #{filepath.inspect}!"
-    end
-
-    if File.exist?(out_loc)
-      raise "Duplicate test file #{out_loc.inspect}? This file should *not* already exist!"
-    end
-
-    out_loc
-  end
-
-  def save_failure_logs
-    saved_log_files.each do |log_file|
-      full_loc = File.expand_path("#{LOGGER_DIR}/#{log_file}")
-      # TODO: we'd like to skip 0-length logfiles. But also Logging doesn't flush. For now, ignore.
-      next unless File.exist?(full_loc)
-
-      FileUtils.mv full_loc, logfail_out_loc(full_loc)
-    end
-  end
-
-  def remove_unsaved_logs
-    Dir["#{LOGGER_DIR}/test_failure*.log"].each do |f|
-      next if f.include?(".out.log") # Don't delete saved logs
-
-      File.unlink(f)
-    end
-  end
-end

data/lib/scarpe/widgets.rb

@@ -1,30 +0,0 @@
-# frozen_string_literal: true
-
-require_relative "colors"
-require_relative "widget"
-require_relative "app"
-
-require_relative "spacing"
-require_relative "background"
-require_relative "border"
-require_relative "star"
-
-require_relative "fill"
-
-require_relative "document_root"
-require_relative "para"
-require_relative "stack"
-require_relative "flow"
-require_relative "button"
-require_relative "image"
-require_relative "edit_box"
-require_relative "edit_line"
-require_relative "list_box"
-require_relative "alert"
-require_relative "span"
-require_relative "shape"
-require_relative "arc"
-
-require_relative "text_widget"
-require_relative "link"
-require_relative "line"

data/lib/scarpe/wv/fill.rb

@@ -1,30 +0,0 @@
-# frozen_string_literal: true
-
-class Scarpe
-  class WebviewFill < WebviewWidget
-    def initialize(properties)
-      super(properties)
-    end
-
-    def element
-      width = @parent.get_style[:width]
-      height = @parent.get_style[:height]
-
-      HTML.render do |h|
-        h.div(id: html_id, style: style(width, height)) do
-          @text
-        end
-      end
-    end
-
-    private
-
-    def style(width, height)
-      styles = {}
-      styles[:width] = width
-      styles[:height] = height
-      styles[:background] = @color if @color
-      styles
-    end
-  end
-end

data/lib/scarpe/wv/shape_helper.rb

@@ -1,44 +0,0 @@
-# frozen_string_literal: true
-
-module ShapeHelper
-  def path_commands
-    $path_commands ||= []
-  end
-
-  def move_to(x, y)
-    validate_coordinates(x, y)
-    path_commands << "M #{x} #{y}"
-  end
-
-  def line_to(x, y)
-    validate_coordinates(x, y)
-    path_commands << "L #{x} #{y}"
-  end
-
-  def shape_path
-    path_commands_str = path_commands.join(" ")
-    path_commands_str
-  end
-
-  def colors
-    $colors ||= []
-  end
-
-  def fill(color)
-    $current_color = color
-  end
-
-  def color_for_fill
-    $current_color || "black"
-  end
-
-  private
-
-  def validate_coordinates(x, y)
-    raise ArgumentError, "Invalid coordinates: x=#{x}, y=#{y}" unless valid_coordinate?(x) && valid_coordinate?(y)
-  end
-
-  def valid_coordinate?(coordinate)
-    coordinate.is_a?(Numeric)
-  end
-end