sass 3.4.25 → 3.7.4

data/vendor/listen/Rakefile

@@ -1,5 +0,0 @@
-require 'bundler/gem_tasks'
-require 'rspec/core/rake_task'
-
-RSpec::Core::RakeTask.new(:spec)
-task :default => :spec

data/vendor/listen/Vagrantfile

@@ -1,96 +0,0 @@
-# -*- mode: ruby -*-
-# vi: set ft=ruby :
-
-Vagrant::Config.run do |config|
-  # All Vagrant configuration is done here. The most common configuration
-  # options are documented and commented below. For a complete reference,
-  # please see the online documentation at vagrantup.com.
-
-  # Every Vagrant virtual environment requires a box to build off of.
-  config.vm.box = "lucid32"
-
-  # The url from where the 'config.vm.box' box will be fetched if it
-  # doesn't already exist on the user's system.
-  # config.vm.box_url = "http://domain.com/path/to/above.box"
-
-  # Boot with a GUI so you can see the screen. (Default is headless)
-  # config.vm.boot_mode = :gui
-
-  # Assign this VM to a host-only network IP, allowing you to access it
-  # via the IP. Host-only networks can talk to the host machine as well as
-  # any other machines on the same network, but cannot be accessed (through this
-  # network interface) by any external networks.
-  # config.vm.network :hostonly, "33.33.33.10"
-
-  # Assign this VM to a bridged network, allowing you to connect directly to a
-  # network using the host's network device. This makes the VM appear as another
-  # physical device on your network.
-  # config.vm.network :bridged
-
-  # Forward a port from the guest to the host, which allows for outside
-  # computers to access the VM, whereas host only networking does not.
-  # config.vm.forward_port 80, 8080
-
-  # Share an additional folder to the guest VM. The first argument is
-  # an identifier, the second is the path on the guest to mount the
-  # folder, and the third is the path on the host to the actual folder.
-  # config.vm.share_folder "v-data", "/vagrant_data", "../data"
-
-  # Enable provisioning with Puppet stand alone.  Puppet manifests
-  # are contained in a directory path relative to this Vagrantfile.
-  # You will need to create the manifests directory and a manifest in
-  # the file lucid32.pp in the manifests_path directory.
-  #
-  # An example Puppet manifest to provision the message of the day:
-  #
-  # # group { "puppet":
-  # #   ensure => "present",
-  # # }
-  # #
-  # # File { owner => 0, group => 0, mode => 0644 }
-  # #
-  # # file { '/etc/motd':
-  # #   content => "Welcome to your Vagrant-built virtual machine!
-  # #               Managed by Puppet.\n"
-  # # }
-  #
-  # config.vm.provision :puppet do |puppet|
-  #   puppet.manifests_path = "manifests"
-  #   puppet.manifest_file  = "lucid32.pp"
-  # end
-
-  # Enable provisioning with chef solo, specifying a cookbooks path (relative
-  # to this Vagrantfile), and adding some recipes and/or roles.
-  #
-  # config.vm.provision :chef_solo do |chef|
-  #   chef.cookbooks_path = "cookbooks"
-  #   chef.add_recipe "mysql"
-  #   chef.add_role "web"
-  #
-  #   # You may also specify custom JSON attributes:
-  #   chef.json = { :mysql_password => "foo" }
-  # end
-
-  # Enable provisioning with chef server, specifying the chef server URL,
-  # and the path to the validation key (relative to this Vagrantfile).
-  #
-  # The Opscode Platform uses HTTPS. Substitute your organization for
-  # ORGNAME in the URL and validation key.
-  #
-  # If you have your own Chef Server, use the appropriate URL, which may be
-  # HTTP instead of HTTPS depending on your configuration. Also change the
-  # validation key to validation.pem.
-  #
-  # config.vm.provision :chef_client do |chef|
-  #   chef.chef_server_url = "https://api.opscode.com/organizations/ORGNAME"
-  #   chef.validation_key_path = "ORGNAME-validator.pem"
-  # end
-  #
-  # If you're using the Opscode platform, your validator client is
-  # ORGNAME-validator, replacing ORGNAME with your organization name.
-  #
-  # IF you have your own Chef Server, the default validation client name is
-  # chef-validator, unless you changed the configuration.
-  #
-  #   chef.validation_client_name = "ORGNAME-validator"
-end

data/vendor/listen/lib/listen.rb

@@ -1,54 +0,0 @@
-require 'listen/turnstile'
-require 'listen/listener'
-require 'listen/directory_record'
-require 'listen/adapter'
-
-module Listen
-
-  module Adapters
-    Adapter::ADAPTERS.each do |adapter|
-      require "listen/adapters/#{adapter.downcase}"
-    end
-  end
-
-  # Listens to file system modifications on a either single directory or multiple directories.
-  # When calling this method, the current thread is not blocked.
-  #
-  # @param (see Listen::Listener#new)
-  #
-  # @yield [modified, added, removed] the changed files
-  # @yieldparam [Array<String>] modified the list of modified files
-  # @yieldparam [Array<String>] added the list of added files
-  # @yieldparam [Array<String>] removed the list of removed files
-  #
-  # @return [Listen::Listener] the file listener if no block given
-  #
-  def self.to(*args, &block)
-    listener = _init_listener(*args, &block)
-
-    block ? listener.start : listener
-  end
-
-  # Listens to file system modifications on a either single directory or multiple directories.
-  # When calling this method, the current thread is blocked.
-  #
-  # @param (see Listen::Listener#new)
-  #
-  # @yield [modified, added, removed] the changed files
-  # @yieldparam [Array<String>] modified the list of modified files
-  # @yieldparam [Array<String>] added the list of added files
-  # @yieldparam [Array<String>] removed the list of removed files
-  #
-  # @since 1.0.0
-  #
-  def self.to!(*args, &block)
-    _init_listener(*args, &block).start!
-  end
-
-  # @private
-  #
-  def self._init_listener(*args, &block)
-    Listener.new(*args, &block)
-  end
-
-end

data/vendor/listen/lib/listen/adapter.rb

@@ -1,327 +0,0 @@
-require 'rbconfig'
-require 'thread'
-require 'set'
-require 'fileutils'
-
-module Listen
-  class Adapter
-    attr_accessor :directories, :callback, :stopped, :paused,
-                  :mutex, :changed_directories, :turnstile, :latency,
-                  :worker, :worker_thread, :poller_thread
-
-    # The list of existing optimized adapters.
-    OPTIMIZED_ADAPTERS = %w[Darwin Linux BSD Windows]
-
-    # The list of existing fallback adapters.
-    FALLBACK_ADAPTERS = %w[Polling]
-
-    # The list of all existing adapters.
-    ADAPTERS = OPTIMIZED_ADAPTERS + FALLBACK_ADAPTERS
-
-    # The default delay between checking for changes.
-    DEFAULT_LATENCY = 0.25
-
-    # The default warning message when falling back to polling adapter.
-    POLLING_FALLBACK_MESSAGE = <<-EOS.gsub(/^\s*/, '')
-      Listen will be polling for changes. Learn more at https://github.com/guard/listen#polling-fallback.
-    EOS
-
-    # Selects the appropriate adapter implementation for the
-    # current OS and initializes it.
-    #
-    # @param [String, Array<String>] directories the directories to watch
-    # @param [Hash] options the adapter options
-    # @option options [Boolean] force_polling to force polling or not
-    # @option options [String, Boolean] polling_fallback_message to change polling fallback message or remove it
-    # @option options [Float] latency the delay between checking for changes in seconds
-    #
-    # @yield [changed_directories, options] callback the callback called when a change happens
-    # @yieldparam [Array<String>] changed_directories the changed directories
-    # @yieldparam [Hash] options callback options (like recursive: true)
-    #
-    # @return [Listen::Adapter] the chosen adapter
-    #
-    def self.select_and_initialize(directories, options = {}, &callback)
-      forced_adapter_class = options.delete(:force_adapter)
-      force_polling = options.delete(:force_polling)
-
-      if forced_adapter_class
-        forced_adapter_class.load_dependent_adapter
-        return forced_adapter_class.new(directories, options, &callback)
-      end
-
-      return Adapters::Polling.new(directories, options, &callback) if force_polling
-
-      OPTIMIZED_ADAPTERS.each do |adapter|
-        namespaced_adapter = Adapters.const_get(adapter)
-        if namespaced_adapter.send(:usable_and_works?, directories, options)
-          return namespaced_adapter.new(directories, options, &callback)
-        end
-      end
-
-      self.warn_polling_fallback(options)
-      Adapters::Polling.new(directories, options, &callback)
-    end
-
-    # Initializes the adapter.
-    #
-    # @param [String, Array<String>] directories the directories to watch
-    # @param [Hash] options the adapter options
-    # @option options [Float] latency the delay between checking for changes in seconds
-    #
-    # @yield [changed_directories, options] callback Callback called when a change happens
-    # @yieldparam [Array<String>] changed_directories the changed directories
-    # @yieldparam [Hash] options callback options (like recursive: true)
-    #
-    # @return [Listen::Adapter] the adapter
-    #
-    def initialize(directories, options = {}, &callback)
-      @directories         = Array(directories)
-      @callback            = callback
-      @stopped             = true
-      @paused              = false
-      @mutex               = Mutex.new
-      @changed_directories = Set.new
-      @turnstile           = Turnstile.new
-      @latency             = options.fetch(:latency, default_latency)
-      @worker              = initialize_worker
-    end
-
-    # Starts the adapter and don't block the current thread.
-    #
-    # @param [Boolean] blocking whether or not to block the current thread after starting
-    #
-    def start
-      mutex.synchronize do
-        return unless stopped
-        @stopped = false
-      end
-
-      start_worker
-      start_poller
-    end
-
-    # Starts the adapter and block the current thread.
-    #
-    # @since 1.0.0
-    #
-    def start!
-      start
-      blocking_thread.join
-    end
-
-    # Stops the adapter.
-    #
-    def stop
-      mutex.synchronize do
-        return if stopped
-        @stopped = true
-        turnstile.signal # ensure no thread is blocked
-      end
-
-      worker.stop if worker
-      Thread.kill(worker_thread) if worker_thread
-      if poller_thread
-        poller_thread.kill
-        poller_thread.join
-      end
-    end
-
-    # Pauses the adapter.
-    #
-    def pause
-      @paused = true
-    end
-
-    # Unpauses the adapter.
-    #
-    def unpause
-      @paused = false
-    end
-
-    # Returns whether the adapter is started or not.
-    #
-    # @return [Boolean] whether the adapter is started or not
-    #
-    def started?
-      !stopped
-    end
-
-    # Returns whether the adapter is paused or not.
-    #
-    # @return [Boolean] whether the adapter is paused or not
-    #
-    def paused?
-      paused
-    end
-
-    # Blocks the main thread until the poll thread
-    # runs the callback.
-    #
-    def wait_for_callback
-      turnstile.wait unless paused
-    end
-
-    # Blocks the main thread until N changes are
-    # detected.
-    #
-    def wait_for_changes(threshold = 0)
-      changes = 0
-
-      loop do
-        mutex.synchronize { changes = changed_directories.size }
-
-        return if paused || stopped
-        return if changes >= threshold
-
-        sleep(latency)
-      end
-    end
-
-    # Checks if the adapter is usable and works on the current OS.
-    #
-    # @param [String, Array<String>] directories the directories to watch
-    # @param [Hash] options the adapter options
-    # @option options [Float] latency the delay between checking for changes in seconds
-    #
-    # @return [Boolean] whether the adapter is usable and work or not
-    #
-    def self.usable_and_works?(directories, options = {})
-      usable? && Array(directories).all? { |d| works?(d, options) }
-    end
-
-    # Checks if the adapter is usable on target OS.
-    #
-    # @return [Boolean] whether usable or not
-    #
-    def self.usable?
-      load_dependent_adapter if RbConfig::CONFIG['target_os'] =~ target_os_regex
-    end
-
-    # Load the adapter gem
-    #
-    # @return [Boolean] whether loaded or not
-    #
-    def self.load_dependent_adapter
-      return true if @loaded
-      require adapter_gem
-      return @loaded = true
-    rescue LoadError
-      false
-    end
-
-    # Runs a tests to determine if the adapter can actually pick up
-    # changes in a given directory and returns the result.
-    #
-    # @note This test takes some time depending on the adapter latency.
-    #
-    # @param [String, Pathname] directory the directory to watch
-    # @param [Hash] options the adapter options
-    # @option options [Float] latency the delay between checking for changes in seconds
-    #
-    # @return [Boolean] whether the adapter works or not
-    #
-    def self.works?(directory, options = {})
-      work      = false
-      test_file = "#{directory}/.listen_test"
-      callback  = lambda { |*| work = true }
-      adapter   = self.new(directory, options, &callback)
-      adapter.start
-
-      FileUtils.touch(test_file)
-
-      t = Thread.new { sleep(adapter.latency * 5); adapter.stop }
-
-      adapter.wait_for_callback
-      work
-    ensure
-      Thread.kill(t) if t
-      FileUtils.rm(test_file, :force => true)
-      adapter.stop if adapter && adapter.started?
-    end
-
-    # Runs the callback and passes it the changes if there are any.
-    #
-    def report_changes
-      changed_dirs = nil
-
-      mutex.synchronize do
-        return if @changed_directories.empty?
-        changed_dirs = @changed_directories.to_a
-        @changed_directories.clear
-      end
-
-      callback.call(changed_dirs, {})
-      turnstile.signal
-    end
-
-    private
-
-    # The default delay between checking for changes.
-    #
-    # @note This method can be overriden on a per-adapter basis.
-    #
-    def default_latency
-      DEFAULT_LATENCY
-    end
-
-    # The thread on which the main thread should wait
-    # when the adapter has been started in blocking mode.
-    #
-    # @note This method can be overriden on a per-adapter basis.
-    #
-    def blocking_thread
-      worker_thread
-    end
-
-    # Initialize the adpater' specific worker.
-    #
-    # @note Each adapter must override this method
-    #   to initialize its own @worker.
-    #
-    def initialize_worker
-      nil
-    end
-
-    # Should start the worker in a new thread.
-    #
-    # @note Each adapter must override this method
-    #   to start its worker on a new @worker_thread thread.
-    #
-    def start_worker
-      raise NotImplementedError, "#{self.class} cannot respond to: #{__method__}"
-    end
-
-    # This method starts a new thread which poll for changes detected by
-    # the adapter and report them back to the user.
-    #
-    def start_poller
-      @poller_thread = Thread.new { poll_changed_directories }
-    end
-
-    # Warn of polling fallback unless the :polling_fallback_message
-    # has been set to false.
-    #
-    # @param [String] warning an existing warning message
-    # @param [Hash] options the adapter options
-    # @option options [Boolean] polling_fallback_message to change polling fallback message or remove it
-    #
-    def self.warn_polling_fallback(options)
-      return if options[:polling_fallback_message] == false
-
-      warning = options[:polling_fallback_message] || POLLING_FALLBACK_MESSAGE
-      Kernel.warn "[Listen warning]:\n#{warning.gsub(/^(.*)/, '  \1')}"
-    end
-
-    # Polls changed directories and reports them back when there are changes.
-    #
-    # @note This method can be overriden on a per-adapter basis.
-    #
-    def poll_changed_directories
-      until stopped
-        sleep(latency)
-        report_changes
-      end
-    end
-  end
-end