rugged 0.28.5 → 0.99.0

data/vendor/libgit2/deps/pcre/pcre_config.c

@@ -0,0 +1,190 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+                       Written by Philip Hazel
+           Copyright (c) 1997-2012 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of the University of Cambridge nor the names of its
+      contributors may be used to endorse or promote products derived from
+      this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+
+/* This module contains the external function pcre_config(). */
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+/* Keep the original link size. */
+static int real_link_size = LINK_SIZE;
+
+#include "pcre_internal.h"
+
+
+/*************************************************
+* Return info about what features are configured *
+*************************************************/
+
+/* This function has an extensible interface so that additional items can be
+added compatibly.
+
+Arguments:
+  what             what information is required
+  where            where to put the information
+
+Returns:           0 if data returned, negative on error
+*/
+
+#if defined COMPILE_PCRE8
+PCRE_EXP_DEFN int PCRE_CALL_CONVENTION
+pcre_config(int what, void *where)
+#elif defined COMPILE_PCRE16
+PCRE_EXP_DEFN int PCRE_CALL_CONVENTION
+pcre16_config(int what, void *where)
+#elif defined COMPILE_PCRE32
+PCRE_EXP_DEFN int PCRE_CALL_CONVENTION
+pcre32_config(int what, void *where)
+#endif
+{
+switch (what)
+  {
+  case PCRE_CONFIG_UTF8:
+#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
+  *((int *)where) = 0;
+  return PCRE_ERROR_BADOPTION;
+#else
+#if defined SUPPORT_UTF
+  *((int *)where) = 1;
+#else
+  *((int *)where) = 0;
+#endif
+  break;
+#endif
+
+  case PCRE_CONFIG_UTF16:
+#if defined COMPILE_PCRE8 || defined COMPILE_PCRE32
+  *((int *)where) = 0;
+  return PCRE_ERROR_BADOPTION;
+#else
+#if defined SUPPORT_UTF
+  *((int *)where) = 1;
+#else
+  *((int *)where) = 0;
+#endif
+  break;
+#endif
+
+  case PCRE_CONFIG_UTF32:
+#if defined COMPILE_PCRE8 || defined COMPILE_PCRE16
+  *((int *)where) = 0;
+  return PCRE_ERROR_BADOPTION;
+#else
+#if defined SUPPORT_UTF
+  *((int *)where) = 1;
+#else
+  *((int *)where) = 0;
+#endif
+  break;
+#endif
+
+  case PCRE_CONFIG_UNICODE_PROPERTIES:
+#ifdef SUPPORT_UCP
+  *((int *)where) = 1;
+#else
+  *((int *)where) = 0;
+#endif
+  break;
+
+  case PCRE_CONFIG_JIT:
+#ifdef SUPPORT_JIT
+  *((int *)where) = 1;
+#else
+  *((int *)where) = 0;
+#endif
+  break;
+
+  case PCRE_CONFIG_JITTARGET:
+#ifdef SUPPORT_JIT
+  *((const char **)where) = PRIV(jit_get_target)();
+#else
+  *((const char **)where) = NULL;
+#endif
+  break;
+
+  case PCRE_CONFIG_NEWLINE:
+  *((int *)where) = NEWLINE;
+  break;
+
+  case PCRE_CONFIG_BSR:
+#ifdef BSR_ANYCRLF
+  *((int *)where) = 1;
+#else
+  *((int *)where) = 0;
+#endif
+  break;
+
+  case PCRE_CONFIG_LINK_SIZE:
+  *((int *)where) = real_link_size;
+  break;
+
+  case PCRE_CONFIG_POSIX_MALLOC_THRESHOLD:
+  *((int *)where) = POSIX_MALLOC_THRESHOLD;
+  break;
+
+  case PCRE_CONFIG_PARENS_LIMIT:
+  *((unsigned long int *)where) = PARENS_NEST_LIMIT;
+  break;
+
+  case PCRE_CONFIG_MATCH_LIMIT:
+  *((unsigned long int *)where) = MATCH_LIMIT;
+  break;
+
+  case PCRE_CONFIG_MATCH_LIMIT_RECURSION:
+  *((unsigned long int *)where) = MATCH_LIMIT_RECURSION;
+  break;
+
+  case PCRE_CONFIG_STACKRECURSE:
+#ifdef NO_RECURSE
+  *((int *)where) = 0;
+#else
+  *((int *)where) = 1;
+#endif
+  break;
+
+  default: return PCRE_ERROR_BADOPTION;
+  }
+
+return 0;
+}
+
+/* End of pcre_config.c */

data/vendor/libgit2/deps/pcre/pcre_dfa_exec.c

@@ -0,0 +1,3676 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language (but see
+below for why this module is different).
+
+                       Written by Philip Hazel
+           Copyright (c) 1997-2017 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of the University of Cambridge nor the names of its
+      contributors may be used to endorse or promote products derived from
+      this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+/* This module contains the external function pcre_dfa_exec(), which is an
+alternative matching function that uses a sort of DFA algorithm (not a true
+FSM). This is NOT Perl-compatible, but it has advantages in certain
+applications. */
+
+
+/* NOTE ABOUT PERFORMANCE: A user of this function sent some code that improved
+the performance of his patterns greatly. I could not use it as it stood, as it
+was not thread safe, and made assumptions about pattern sizes. Also, it caused
+test 7 to loop, and test 9 to crash with a segfault.
+
+The issue is the check for duplicate states, which is done by a simple linear
+search up the state list. (Grep for "duplicate" below to find the code.) For
+many patterns, there will never be many states active at one time, so a simple
+linear search is fine. In patterns that have many active states, it might be a
+bottleneck. The suggested code used an indexing scheme to remember which states
+had previously been used for each character, and avoided the linear search when
+it knew there was no chance of a duplicate. This was implemented when adding
+states to the state lists.
+
+I wrote some thread-safe, not-limited code to try something similar at the time
+of checking for duplicates (instead of when adding states), using index vectors
+on the stack. It did give a 13% improvement with one specially constructed
+pattern for certain subject strings, but on other strings and on many of the
+simpler patterns in the test suite it did worse. The major problem, I think,
+was the extra time to initialize the index. This had to be done for each call
+of internal_dfa_exec(). (The supplied patch used a static vector, initialized
+only once - I suspect this was the cause of the problems with the tests.)
+
+Overall, I concluded that the gains in some cases did not outweigh the losses
+in others, so I abandoned this code. */
+
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#define NLBLOCK md             /* Block containing newline information */
+#define PSSTART start_subject  /* Field containing processed string start */
+#define PSEND   end_subject    /* Field containing processed string end */
+
+#include "pcre_internal.h"
+
+
+/* For use to indent debugging output */
+
+#define SP "                   "
+
+
+/*************************************************
+*      Code parameters and static tables         *
+*************************************************/
+
+/* These are offsets that are used to turn the OP_TYPESTAR and friends opcodes
+into others, under special conditions. A gap of 20 between the blocks should be
+enough. The resulting opcodes don't have to be less than 256 because they are
+never stored, so we push them well clear of the normal opcodes. */
+
+#define OP_PROP_EXTRA       300
+#define OP_EXTUNI_EXTRA     320
+#define OP_ANYNL_EXTRA      340
+#define OP_HSPACE_EXTRA     360
+#define OP_VSPACE_EXTRA     380
+
+
+/* This table identifies those opcodes that are followed immediately by a
+character that is to be tested in some way. This makes it possible to
+centralize the loading of these characters. In the case of Type * etc, the
+"character" is the opcode for \D, \d, \S, \s, \W, or \w, which will always be a
+small value. Non-zero values in the table are the offsets from the opcode where
+the character is to be found. ***NOTE*** If the start of this table is
+modified, the three tables that follow must also be modified. */
+
+static const pcre_uint8 coptable[] = {
+  0,                             /* End                                    */
+  0, 0, 0, 0, 0,                 /* \A, \G, \K, \B, \b                     */
+  0, 0, 0, 0, 0, 0,              /* \D, \d, \S, \s, \W, \w                 */
+  0, 0, 0,                       /* Any, AllAny, Anybyte                   */
+  0, 0,                          /* \P, \p                                 */
+  0, 0, 0, 0, 0,                 /* \R, \H, \h, \V, \v                     */
+  0,                             /* \X                                     */
+  0, 0, 0, 0, 0, 0,              /* \Z, \z, $, $M, ^, ^M                   */
+  1,                             /* Char                                   */
+  1,                             /* Chari                                  */
+  1,                             /* not                                    */
+  1,                             /* noti                                   */
+  /* Positive single-char repeats                                          */
+  1, 1, 1, 1, 1, 1,              /* *, *?, +, +?, ?, ??                    */
+  1+IMM2_SIZE, 1+IMM2_SIZE,      /* upto, minupto                          */
+  1+IMM2_SIZE,                   /* exact                                  */
+  1, 1, 1, 1+IMM2_SIZE,          /* *+, ++, ?+, upto+                      */
+  1, 1, 1, 1, 1, 1,              /* *I, *?I, +I, +?I, ?I, ??I              */
+  1+IMM2_SIZE, 1+IMM2_SIZE,      /* upto I, minupto I                      */
+  1+IMM2_SIZE,                   /* exact I                                */
+  1, 1, 1, 1+IMM2_SIZE,          /* *+I, ++I, ?+I, upto+I                  */
+  /* Negative single-char repeats - only for chars < 256                   */
+  1, 1, 1, 1, 1, 1,              /* NOT *, *?, +, +?, ?, ??                */
+  1+IMM2_SIZE, 1+IMM2_SIZE,      /* NOT upto, minupto                      */
+  1+IMM2_SIZE,                   /* NOT exact                              */
+  1, 1, 1, 1+IMM2_SIZE,          /* NOT *+, ++, ?+, upto+                  */
+  1, 1, 1, 1, 1, 1,              /* NOT *I, *?I, +I, +?I, ?I, ??I          */
+  1+IMM2_SIZE, 1+IMM2_SIZE,      /* NOT upto I, minupto I                  */
+  1+IMM2_SIZE,                   /* NOT exact I                            */
+  1, 1, 1, 1+IMM2_SIZE,          /* NOT *+I, ++I, ?+I, upto+I              */
+  /* Positive type repeats                                                 */
+  1, 1, 1, 1, 1, 1,              /* Type *, *?, +, +?, ?, ??               */
+  1+IMM2_SIZE, 1+IMM2_SIZE,      /* Type upto, minupto                     */
+  1+IMM2_SIZE,                   /* Type exact                             */
+  1, 1, 1, 1+IMM2_SIZE,          /* Type *+, ++, ?+, upto+                 */
+  /* Character class & ref repeats                                         */
+  0, 0, 0, 0, 0, 0,              /* *, *?, +, +?, ?, ??                    */
+  0, 0,                          /* CRRANGE, CRMINRANGE                    */
+  0, 0, 0, 0,                    /* Possessive *+, ++, ?+, CRPOSRANGE      */
+  0,                             /* CLASS                                  */
+  0,                             /* NCLASS                                 */
+  0,                             /* XCLASS - variable length               */
+  0,                             /* REF                                    */
+  0,                             /* REFI                                   */
+  0,                             /* DNREF                                  */
+  0,                             /* DNREFI                                 */
+  0,                             /* RECURSE                                */
+  0,                             /* CALLOUT                                */
+  0,                             /* Alt                                    */
+  0,                             /* Ket                                    */
+  0,                             /* KetRmax                                */
+  0,                             /* KetRmin                                */
+  0,                             /* KetRpos                                */
+  0,                             /* Reverse                                */
+  0,                             /* Assert                                 */
+  0,                             /* Assert not                             */
+  0,                             /* Assert behind                          */
+  0,                             /* Assert behind not                      */
+  0, 0,                          /* ONCE, ONCE_NC                          */
+  0, 0, 0, 0, 0,                 /* BRA, BRAPOS, CBRA, CBRAPOS, COND       */
+  0, 0, 0, 0, 0,                 /* SBRA, SBRAPOS, SCBRA, SCBRAPOS, SCOND  */
+  0, 0,                          /* CREF, DNCREF                           */
+  0, 0,                          /* RREF, DNRREF                           */
+  0,                             /* DEF                                    */
+  0, 0, 0,                       /* BRAZERO, BRAMINZERO, BRAPOSZERO        */
+  0, 0, 0,                       /* MARK, PRUNE, PRUNE_ARG                 */
+  0, 0, 0, 0,                    /* SKIP, SKIP_ARG, THEN, THEN_ARG         */
+  0, 0, 0, 0,                    /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT    */
+  0, 0                           /* CLOSE, SKIPZERO  */
+};
+
+/* This table identifies those opcodes that inspect a character. It is used to
+remember the fact that a character could have been inspected when the end of
+the subject is reached. ***NOTE*** If the start of this table is modified, the
+two tables that follow must also be modified. */
+
+static const pcre_uint8 poptable[] = {
+  0,                             /* End                                    */
+  0, 0, 0, 1, 1,                 /* \A, \G, \K, \B, \b                     */
+  1, 1, 1, 1, 1, 1,              /* \D, \d, \S, \s, \W, \w                 */
+  1, 1, 1,                       /* Any, AllAny, Anybyte                   */
+  1, 1,                          /* \P, \p                                 */
+  1, 1, 1, 1, 1,                 /* \R, \H, \h, \V, \v                     */
+  1,                             /* \X                                     */
+  0, 0, 0, 0, 0, 0,              /* \Z, \z, $, $M, ^, ^M                   */
+  1,                             /* Char                                   */
+  1,                             /* Chari                                  */
+  1,                             /* not                                    */
+  1,                             /* noti                                   */
+  /* Positive single-char repeats                                          */
+  1, 1, 1, 1, 1, 1,              /* *, *?, +, +?, ?, ??                    */
+  1, 1, 1,                       /* upto, minupto, exact                   */
+  1, 1, 1, 1,                    /* *+, ++, ?+, upto+                      */
+  1, 1, 1, 1, 1, 1,              /* *I, *?I, +I, +?I, ?I, ??I              */
+  1, 1, 1,                       /* upto I, minupto I, exact I             */
+  1, 1, 1, 1,                    /* *+I, ++I, ?+I, upto+I                  */
+  /* Negative single-char repeats - only for chars < 256                   */
+  1, 1, 1, 1, 1, 1,              /* NOT *, *?, +, +?, ?, ??                */
+  1, 1, 1,                       /* NOT upto, minupto, exact               */
+  1, 1, 1, 1,                    /* NOT *+, ++, ?+, upto+                  */
+  1, 1, 1, 1, 1, 1,              /* NOT *I, *?I, +I, +?I, ?I, ??I          */
+  1, 1, 1,                       /* NOT upto I, minupto I, exact I         */
+  1, 1, 1, 1,                    /* NOT *+I, ++I, ?+I, upto+I              */
+  /* Positive type repeats                                                 */
+  1, 1, 1, 1, 1, 1,              /* Type *, *?, +, +?, ?, ??               */
+  1, 1, 1,                       /* Type upto, minupto, exact              */
+  1, 1, 1, 1,                    /* Type *+, ++, ?+, upto+                 */
+  /* Character class & ref repeats                                         */
+  1, 1, 1, 1, 1, 1,              /* *, *?, +, +?, ?, ??                    */
+  1, 1,                          /* CRRANGE, CRMINRANGE                    */
+  1, 1, 1, 1,                    /* Possessive *+, ++, ?+, CRPOSRANGE      */
+  1,                             /* CLASS                                  */
+  1,                             /* NCLASS                                 */
+  1,                             /* XCLASS - variable length               */
+  0,                             /* REF                                    */
+  0,                             /* REFI                                   */
+  0,                             /* DNREF                                  */
+  0,                             /* DNREFI                                 */
+  0,                             /* RECURSE                                */
+  0,                             /* CALLOUT                                */
+  0,                             /* Alt                                    */
+  0,                             /* Ket                                    */
+  0,                             /* KetRmax                                */
+  0,                             /* KetRmin                                */
+  0,                             /* KetRpos                                */
+  0,                             /* Reverse                                */
+  0,                             /* Assert                                 */
+  0,                             /* Assert not                             */
+  0,                             /* Assert behind                          */
+  0,                             /* Assert behind not                      */
+  0, 0,                          /* ONCE, ONCE_NC                          */
+  0, 0, 0, 0, 0,                 /* BRA, BRAPOS, CBRA, CBRAPOS, COND       */
+  0, 0, 0, 0, 0,                 /* SBRA, SBRAPOS, SCBRA, SCBRAPOS, SCOND  */
+  0, 0,                          /* CREF, DNCREF                           */
+  0, 0,                          /* RREF, DNRREF                           */
+  0,                             /* DEF                                    */
+  0, 0, 0,                       /* BRAZERO, BRAMINZERO, BRAPOSZERO        */
+  0, 0, 0,                       /* MARK, PRUNE, PRUNE_ARG                 */
+  0, 0, 0, 0,                    /* SKIP, SKIP_ARG, THEN, THEN_ARG         */
+  0, 0, 0, 0,                    /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT    */
+  0, 0                           /* CLOSE, SKIPZERO                        */
+};
+
+/* These 2 tables allow for compact code for testing for \D, \d, \S, \s, \W,
+and \w */
+
+static const pcre_uint8 toptable1[] = {
+  0, 0, 0, 0, 0, 0,
+  ctype_digit, ctype_digit,
+  ctype_space, ctype_space,
+  ctype_word,  ctype_word,
+  0, 0                            /* OP_ANY, OP_ALLANY */
+};
+
+static const pcre_uint8 toptable2[] = {
+  0, 0, 0, 0, 0, 0,
+  ctype_digit, 0,
+  ctype_space, 0,
+  ctype_word,  0,
+  1, 1                            /* OP_ANY, OP_ALLANY */
+};
+
+
+/* Structure for holding data about a particular state, which is in effect the
+current data for an active path through the match tree. It must consist
+entirely of ints because the working vector we are passed, and which we put
+these structures in, is a vector of ints. */
+
+typedef struct stateblock {
+  int offset;                     /* Offset to opcode */
+  int count;                      /* Count for repeats */
+  int data;                       /* Some use extra data */
+} stateblock;
+
+#define INTS_PER_STATEBLOCK  (int)(sizeof(stateblock)/sizeof(int))
+
+
+#ifdef PCRE_DEBUG
+/*************************************************
+*             Print character string             *
+*************************************************/
+
+/* Character string printing function for debugging.
+
+Arguments:
+  p            points to string
+  length       number of bytes
+  f            where to print
+
+Returns:       nothing
+*/
+
+static void
+pchars(const pcre_uchar *p, int length, FILE *f)
+{
+pcre_uint32 c;
+while (length-- > 0)
+  {
+  if (isprint(c = *(p++)))
+    fprintf(f, "%c", c);
+  else
+    fprintf(f, "\\x{%02x}", c);
+  }
+}
+#endif
+
+
+
+/*************************************************
+*    Execute a Regular Expression - DFA engine   *
+*************************************************/
+
+/* This internal function applies a compiled pattern to a subject string,
+starting at a given point, using a DFA engine. This function is called from the
+external one, possibly multiple times if the pattern is not anchored. The
+function calls itself recursively for some kinds of subpattern.
+
+Arguments:
+  md                the match_data block with fixed information
+  this_start_code   the opening bracket of this subexpression's code
+  current_subject   where we currently are in the subject string
+  start_offset      start offset in the subject string
+  offsets           vector to contain the matching string offsets
+  offsetcount       size of same
+  workspace         vector of workspace
+  wscount           size of same
+  rlevel            function call recursion level
+
+Returns:            > 0 => number of match offset pairs placed in offsets
+                    = 0 => offsets overflowed; longest matches are present
+                     -1 => failed to match
+                   < -1 => some kind of unexpected problem
+
+The following macros are used for adding states to the two state vectors (one
+for the current character, one for the following character). */
+
+#define ADD_ACTIVE(x,y) \
+  if (active_count++ < wscount) \
+    { \
+    next_active_state->offset = (x); \
+    next_active_state->count  = (y); \
+    next_active_state++; \
+    DPRINTF(("%.*sADD_ACTIVE(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \
+    } \
+  else return PCRE_ERROR_DFA_WSSIZE
+
+#define ADD_ACTIVE_DATA(x,y,z) \
+  if (active_count++ < wscount) \
+    { \
+    next_active_state->offset = (x); \
+    next_active_state->count  = (y); \
+    next_active_state->data   = (z); \
+    next_active_state++; \
+    DPRINTF(("%.*sADD_ACTIVE_DATA(%d,%d,%d)\n", rlevel*2-2, SP, (x), (y), (z))); \
+    } \
+  else return PCRE_ERROR_DFA_WSSIZE
+
+#define ADD_NEW(x,y) \
+  if (new_count++ < wscount) \
+    { \
+    next_new_state->offset = (x); \
+    next_new_state->count  = (y); \
+    next_new_state++; \
+    DPRINTF(("%.*sADD_NEW(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \
+    } \
+  else return PCRE_ERROR_DFA_WSSIZE
+
+#define ADD_NEW_DATA(x,y,z) \
+  if (new_count++ < wscount) \
+    { \
+    next_new_state->offset = (x); \
+    next_new_state->count  = (y); \
+    next_new_state->data   = (z); \
+    next_new_state++; \
+    DPRINTF(("%.*sADD_NEW_DATA(%d,%d,%d) line %d\n", rlevel*2-2, SP, \
+      (x), (y), (z), __LINE__)); \
+    } \
+  else return PCRE_ERROR_DFA_WSSIZE
+
+/* And now, here is the code */
+
+static int
+internal_dfa_exec(
+  dfa_match_data *md,
+  const pcre_uchar *this_start_code,
+  const pcre_uchar *current_subject,
+  int start_offset,
+  int *offsets,
+  int offsetcount,
+  int *workspace,
+  int wscount,
+  int  rlevel)
+{
+stateblock *active_states, *new_states, *temp_states;
+stateblock *next_active_state, *next_new_state;
+
+const pcre_uint8 *ctypes, *lcc, *fcc;
+const pcre_uchar *ptr;
+const pcre_uchar *end_code, *first_op;
+
+dfa_recursion_info new_recursive;
+
+int active_count, new_count, match_count;
+
+/* Some fields in the md block are frequently referenced, so we load them into
+independent variables in the hope that this will perform better. */
+
+const pcre_uchar *start_subject = md->start_subject;
+const pcre_uchar *end_subject = md->end_subject;
+const pcre_uchar *start_code = md->start_code;
+
+#ifdef SUPPORT_UTF
+BOOL utf = (md->poptions & PCRE_UTF8) != 0;
+#else
+BOOL utf = FALSE;
+#endif
+
+BOOL reset_could_continue = FALSE;
+
+rlevel++;
+offsetcount &= (-2);
+
+wscount -= 2;
+wscount = (wscount - (wscount % (INTS_PER_STATEBLOCK * 2))) /
+          (2 * INTS_PER_STATEBLOCK);
+
+DPRINTF(("\n%.*s---------------------\n"
+  "%.*sCall to internal_dfa_exec f=%d\n",
+  rlevel*2-2, SP, rlevel*2-2, SP, rlevel));
+
+ctypes = md->tables + ctypes_offset;
+lcc = md->tables + lcc_offset;
+fcc = md->tables + fcc_offset;
+
+match_count = PCRE_ERROR_NOMATCH;   /* A negative number */
+
+active_states = (stateblock *)(workspace + 2);
+next_new_state = new_states = active_states + wscount;
+new_count = 0;
+
+first_op = this_start_code + 1 + LINK_SIZE +
+  ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA ||
+    *this_start_code == OP_CBRAPOS || *this_start_code == OP_SCBRAPOS)
+    ? IMM2_SIZE:0);
+
+/* The first thing in any (sub) pattern is a bracket of some sort. Push all
+the alternative states onto the list, and find out where the end is. This
+makes is possible to use this function recursively, when we want to stop at a
+matching internal ket rather than at the end.
+
+If the first opcode in the first alternative is OP_REVERSE, we are dealing with
+a backward assertion. In that case, we have to find out the maximum amount to
+move back, and set up each alternative appropriately. */
+
+if (*first_op == OP_REVERSE)
+  {
+  int max_back = 0;
+  int gone_back;
+
+  end_code = this_start_code;
+  do
+    {
+    int back = GET(end_code, 2+LINK_SIZE);
+    if (back > max_back) max_back = back;
+    end_code += GET(end_code, 1);
+    }
+  while (*end_code == OP_ALT);
+
+  /* If we can't go back the amount required for the longest lookbehind
+  pattern, go back as far as we can; some alternatives may still be viable. */
+
+#ifdef SUPPORT_UTF
+  /* In character mode we have to step back character by character */
+
+  if (utf)
+    {
+    for (gone_back = 0; gone_back < max_back; gone_back++)
+      {
+      if (current_subject <= start_subject) break;
+      current_subject--;
+      ACROSSCHAR(current_subject > start_subject, *current_subject, current_subject--);
+      }
+    }
+  else
+#endif
+
+  /* In byte-mode we can do this quickly. */
+
+    {
+    gone_back = (current_subject - max_back < start_subject)?
+      (int)(current_subject - start_subject) : max_back;
+    current_subject -= gone_back;
+    }
+
+  /* Save the earliest consulted character */
+
+  if (current_subject < md->start_used_ptr)
+    md->start_used_ptr = current_subject;
+
+  /* Now we can process the individual branches. */
+
+  end_code = this_start_code;
+  do
+    {
+    int back = GET(end_code, 2+LINK_SIZE);
+    if (back <= gone_back)
+      {
+      int bstate = (int)(end_code - start_code + 2 + 2*LINK_SIZE);
+      ADD_NEW_DATA(-bstate, 0, gone_back - back);
+      }
+    end_code += GET(end_code, 1);
+    }
+  while (*end_code == OP_ALT);
+ }
+
+/* This is the code for a "normal" subpattern (not a backward assertion). The
+start of a whole pattern is always one of these. If we are at the top level,
+we may be asked to restart matching from the same point that we reached for a
+previous partial match. We still have to scan through the top-level branches to
+find the end state. */
+
+else
+  {
+  end_code = this_start_code;
+
+  /* Restarting */
+
+  if (rlevel == 1 && (md->moptions & PCRE_DFA_RESTART) != 0)
+    {
+    do { end_code += GET(end_code, 1); } while (*end_code == OP_ALT);
+    new_count = workspace[1];
+    if (!workspace[0])
+      memcpy(new_states, active_states, new_count * sizeof(stateblock));
+    }
+
+  /* Not restarting */
+
+  else
+    {
+    int length = 1 + LINK_SIZE +
+      ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA ||
+        *this_start_code == OP_CBRAPOS || *this_start_code == OP_SCBRAPOS)
+        ? IMM2_SIZE:0);
+    do
+      {
+      ADD_NEW((int)(end_code - start_code + length), 0);
+      end_code += GET(end_code, 1);
+      length = 1 + LINK_SIZE;
+      }
+    while (*end_code == OP_ALT);
+    }
+  }
+
+workspace[0] = 0;    /* Bit indicating which vector is current */
+
+DPRINTF(("%.*sEnd state = %d\n", rlevel*2-2, SP, (int)(end_code - start_code)));
+
+/* Loop for scanning the subject */
+
+ptr = current_subject;
+for (;;)
+  {
+  int i, j;
+  int clen, dlen;
+  pcre_uint32 c, d;
+  int forced_fail = 0;
+  BOOL partial_newline = FALSE;
+  BOOL could_continue = reset_could_continue;
+  reset_could_continue = FALSE;
+
+  /* Make the new state list into the active state list and empty the
+  new state list. */
+
+  temp_states = active_states;
+  active_states = new_states;
+  new_states = temp_states;
+  active_count = new_count;
+  new_count = 0;
+
+  workspace[0] ^= 1;              /* Remember for the restarting feature */
+  workspace[1] = active_count;
+
+#ifdef PCRE_DEBUG
+  printf("%.*sNext character: rest of subject = \"", rlevel*2-2, SP);
+  pchars(ptr, STRLEN_UC(ptr), stdout);
+  printf("\"\n");
+
+  printf("%.*sActive states: ", rlevel*2-2, SP);
+  for (i = 0; i < active_count; i++)
+    printf("%d/%d ", active_states[i].offset, active_states[i].count);
+  printf("\n");
+#endif
+
+  /* Set the pointers for adding new states */
+
+  next_active_state = active_states + active_count;
+  next_new_state = new_states;
+
+  /* Load the current character from the subject outside the loop, as many
+  different states may want to look at it, and we assume that at least one
+  will. */
+
+  if (ptr < end_subject)
+    {
+    clen = 1;        /* Number of data items in the character */
+#ifdef SUPPORT_UTF
+    GETCHARLENTEST(c, ptr, clen);
+#else
+    c = *ptr;
+#endif  /* SUPPORT_UTF */
+    }
+  else
+    {
+    clen = 0;        /* This indicates the end of the subject */
+    c = NOTACHAR;    /* This value should never actually be used */
+    }
+
+  /* Scan up the active states and act on each one. The result of an action
+  may be to add more states to the currently active list (e.g. on hitting a
+  parenthesis) or it may be to put states on the new list, for considering
+  when we move the character pointer on. */
+
+  for (i = 0; i < active_count; i++)
+    {
+    stateblock *current_state = active_states + i;
+    BOOL caseless = FALSE;
+    const pcre_uchar *code;
+    int state_offset = current_state->offset;
+    int codevalue, rrc;
+    int count;
+
+#ifdef PCRE_DEBUG
+    printf ("%.*sProcessing state %d c=", rlevel*2-2, SP, state_offset);
+    if (clen == 0) printf("EOL\n");
+      else if (c > 32 && c < 127) printf("'%c'\n", c);
+        else printf("0x%02x\n", c);
+#endif
+
+    /* A negative offset is a special case meaning "hold off going to this
+    (negated) state until the number of characters in the data field have
+    been skipped". If the could_continue flag was passed over from a previous
+    state, arrange for it to passed on. */
+
+    if (state_offset < 0)
+      {
+      if (current_state->data > 0)
+        {
+        DPRINTF(("%.*sSkipping this character\n", rlevel*2-2, SP));
+        ADD_NEW_DATA(state_offset, current_state->count,
+          current_state->data - 1);
+        if (could_continue) reset_could_continue = TRUE;
+        continue;
+        }
+      else
+        {
+        current_state->offset = state_offset = -state_offset;
+        }
+      }
+
+    /* Check for a duplicate state with the same count, and skip if found.
+    See the note at the head of this module about the possibility of improving
+    performance here. */
+
+    for (j = 0; j < i; j++)
+      {
+      if (active_states[j].offset == state_offset &&
+          active_states[j].count == current_state->count)
+        {
+        DPRINTF(("%.*sDuplicate state: skipped\n", rlevel*2-2, SP));
+        goto NEXT_ACTIVE_STATE;
+        }
+      }
+
+    /* The state offset is the offset to the opcode */
+
+    code = start_code + state_offset;
+    codevalue = *code;
+
+    /* If this opcode inspects a character, but we are at the end of the
+    subject, remember the fact for use when testing for a partial match. */
+
+    if (clen == 0 && poptable[codevalue] != 0)
+      could_continue = TRUE;
+
+    /* If this opcode is followed by an inline character, load it. It is
+    tempting to test for the presence of a subject character here, but that
+    is wrong, because sometimes zero repetitions of the subject are
+    permitted.
+
+    We also use this mechanism for opcodes such as OP_TYPEPLUS that take an
+    argument that is not a data character - but is always one byte long because
+    the values are small. We have to take special action to deal with  \P, \p,
+    \H, \h, \V, \v and \X in this case. To keep the other cases fast, convert
+    these ones to new opcodes. */
+
+    if (coptable[codevalue] > 0)
+      {
+      dlen = 1;
+#ifdef SUPPORT_UTF
+      if (utf) { GETCHARLEN(d, (code + coptable[codevalue]), dlen); } else
+#endif  /* SUPPORT_UTF */
+      d = code[coptable[codevalue]];
+      if (codevalue >= OP_TYPESTAR)
+        {
+        switch(d)
+          {
+          case OP_ANYBYTE: return PCRE_ERROR_DFA_UITEM;
+          case OP_NOTPROP:
+          case OP_PROP: codevalue += OP_PROP_EXTRA; break;
+          case OP_ANYNL: codevalue += OP_ANYNL_EXTRA; break;
+          case OP_EXTUNI: codevalue += OP_EXTUNI_EXTRA; break;
+          case OP_NOT_HSPACE:
+          case OP_HSPACE: codevalue += OP_HSPACE_EXTRA; break;
+          case OP_NOT_VSPACE:
+          case OP_VSPACE: codevalue += OP_VSPACE_EXTRA; break;
+          default: break;
+          }
+        }
+      }
+    else
+      {
+      dlen = 0;         /* Not strictly necessary, but compilers moan */
+      d = NOTACHAR;     /* if these variables are not set. */
+      }
+
+
+    /* Now process the individual opcodes */
+
+    switch (codevalue)
+      {
+/* ========================================================================== */
+      /* These cases are never obeyed. This is a fudge that causes a compile-
+      time error if the vectors coptable or poptable, which are indexed by
+      opcode, are not the correct length. It seems to be the only way to do
+      such a check at compile time, as the sizeof() operator does not work
+      in the C preprocessor. */
+
+      case OP_TABLE_LENGTH:
+      case OP_TABLE_LENGTH +
+        ((sizeof(coptable) == OP_TABLE_LENGTH) &&
+         (sizeof(poptable) == OP_TABLE_LENGTH)):
+      break;
+
+/* ========================================================================== */
+      /* Reached a closing bracket. If not at the end of the pattern, carry
+      on with the next opcode. For repeating opcodes, also add the repeat
+      state. Note that KETRPOS will always be encountered at the end of the
+      subpattern, because the possessive subpattern repeats are always handled
+      using recursive calls. Thus, it never adds any new states.
+
+      At the end of the (sub)pattern, unless we have an empty string and
+      PCRE_NOTEMPTY is set, or PCRE_NOTEMPTY_ATSTART is set and we are at the
+      start of the subject, save the match data, shifting up all previous
+      matches so we always have the longest first. */
+
+      case OP_KET:
+      case OP_KETRMIN:
+      case OP_KETRMAX:
+      case OP_KETRPOS:
+      if (code != end_code)
+        {
+        ADD_ACTIVE(state_offset + 1 + LINK_SIZE, 0);
+        if (codevalue != OP_KET)
+          {
+          ADD_ACTIVE(state_offset - GET(code, 1), 0);
+          }
+        }
+      else
+        {
+        if (ptr > current_subject ||
+            ((md->moptions & PCRE_NOTEMPTY) == 0 &&
+              ((md->moptions & PCRE_NOTEMPTY_ATSTART) == 0 ||
+                current_subject > start_subject + md->start_offset)))
+          {
+          if (match_count < 0) match_count = (offsetcount >= 2)? 1 : 0;
+            else if (match_count > 0 && ++match_count * 2 > offsetcount)
+              match_count = 0;
+          count = ((match_count == 0)? offsetcount : match_count * 2) - 2;
+          if (count > 0) memmove(offsets + 2, offsets, count * sizeof(int));
+          if (offsetcount >= 2)
+            {
+            offsets[0] = (int)(current_subject - start_subject);
+            offsets[1] = (int)(ptr - start_subject);
+            DPRINTF(("%.*sSet matched string = \"%.*s\"\n", rlevel*2-2, SP,
+              offsets[1] - offsets[0], (char *)current_subject));
+            }
+          if ((md->moptions & PCRE_DFA_SHORTEST) != 0)
+            {
+            DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n"
+              "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel,
+              match_count, rlevel*2-2, SP));
+            return match_count;
+            }
+          }
+        }
+      break;
+
+/* ========================================================================== */
+      /* These opcodes add to the current list of states without looking
+      at the current character. */
+
+      /*-----------------------------------------------------------------*/
+      case OP_ALT:
+      do { code += GET(code, 1); } while (*code == OP_ALT);
+      ADD_ACTIVE((int)(code - start_code), 0);
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_BRA:
+      case OP_SBRA:
+      do
+        {
+        ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0);
+        code += GET(code, 1);
+        }
+      while (*code == OP_ALT);
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_CBRA:
+      case OP_SCBRA:
+      ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE + IMM2_SIZE),  0);
+      code += GET(code, 1);
+      while (*code == OP_ALT)
+        {
+        ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE),  0);
+        code += GET(code, 1);
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_BRAZERO:
+      case OP_BRAMINZERO:
+      ADD_ACTIVE(state_offset + 1, 0);
+      code += 1 + GET(code, 2);
+      while (*code == OP_ALT) code += GET(code, 1);
+      ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0);
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_SKIPZERO:
+      code += 1 + GET(code, 2);
+      while (*code == OP_ALT) code += GET(code, 1);
+      ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0);
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_CIRC:
+      if (ptr == start_subject && (md->moptions & PCRE_NOTBOL) == 0)
+        { ADD_ACTIVE(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_CIRCM:
+      if ((ptr == start_subject && (md->moptions & PCRE_NOTBOL) == 0) ||
+          (ptr != end_subject && WAS_NEWLINE(ptr)))
+        { ADD_ACTIVE(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_EOD:
+      if (ptr >= end_subject)
+        {
+        if ((md->moptions & PCRE_PARTIAL_HARD) != 0)
+          could_continue = TRUE;
+        else { ADD_ACTIVE(state_offset + 1, 0); }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_SOD:
+      if (ptr == start_subject) { ADD_ACTIVE(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_SOM:
+      if (ptr == start_subject + start_offset) { ADD_ACTIVE(state_offset + 1, 0); }
+      break;
+
+
+/* ========================================================================== */
+      /* These opcodes inspect the next subject character, and sometimes
+      the previous one as well, but do not have an argument. The variable
+      clen contains the length of the current character and is zero if we are
+      at the end of the subject. */
+
+      /*-----------------------------------------------------------------*/
+      case OP_ANY:
+      if (clen > 0 && !IS_NEWLINE(ptr))
+        {
+        if (ptr + 1 >= md->end_subject &&
+            (md->moptions & (PCRE_PARTIAL_HARD)) != 0 &&
+            NLBLOCK->nltype == NLTYPE_FIXED &&
+            NLBLOCK->nllen == 2 &&
+            c == NLBLOCK->nl[0])
+          {
+          could_continue = partial_newline = TRUE;
+          }
+        else
+          {
+          ADD_NEW(state_offset + 1, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_ALLANY:
+      if (clen > 0)
+        { ADD_NEW(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_EODN:
+      if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0)
+        could_continue = TRUE;
+      else if (clen == 0 || (IS_NEWLINE(ptr) && ptr == end_subject - md->nllen))
+        { ADD_ACTIVE(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_DOLL:
+      if ((md->moptions & PCRE_NOTEOL) == 0)
+        {
+        if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0)
+          could_continue = TRUE;
+        else if (clen == 0 ||
+            ((md->poptions & PCRE_DOLLAR_ENDONLY) == 0 && IS_NEWLINE(ptr) &&
+               (ptr == end_subject - md->nllen)
+            ))
+          { ADD_ACTIVE(state_offset + 1, 0); }
+        else if (ptr + 1 >= md->end_subject &&
+                 (md->moptions & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) != 0 &&
+                 NLBLOCK->nltype == NLTYPE_FIXED &&
+                 NLBLOCK->nllen == 2 &&
+                 c == NLBLOCK->nl[0])
+          {
+          if ((md->moptions & PCRE_PARTIAL_HARD) != 0)
+            {
+            reset_could_continue = TRUE;
+            ADD_NEW_DATA(-(state_offset + 1), 0, 1);
+            }
+          else could_continue = partial_newline = TRUE;
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_DOLLM:
+      if ((md->moptions & PCRE_NOTEOL) == 0)
+        {
+        if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0)
+          could_continue = TRUE;
+        else if (clen == 0 ||
+            ((md->poptions & PCRE_DOLLAR_ENDONLY) == 0 && IS_NEWLINE(ptr)))
+          { ADD_ACTIVE(state_offset + 1, 0); }
+        else if (ptr + 1 >= md->end_subject &&
+                 (md->moptions & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) != 0 &&
+                 NLBLOCK->nltype == NLTYPE_FIXED &&
+                 NLBLOCK->nllen == 2 &&
+                 c == NLBLOCK->nl[0])
+          {
+          if ((md->moptions & PCRE_PARTIAL_HARD) != 0)
+            {
+            reset_could_continue = TRUE;
+            ADD_NEW_DATA(-(state_offset + 1), 0, 1);
+            }
+          else could_continue = partial_newline = TRUE;
+          }
+        }
+      else if (IS_NEWLINE(ptr))
+        { ADD_ACTIVE(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+
+      case OP_DIGIT:
+      case OP_WHITESPACE:
+      case OP_WORDCHAR:
+      if (clen > 0 && c < 256 &&
+            ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0)
+        { ADD_NEW(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_NOT_DIGIT:
+      case OP_NOT_WHITESPACE:
+      case OP_NOT_WORDCHAR:
+      if (clen > 0 && (c >= 256 ||
+            ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0))
+        { ADD_NEW(state_offset + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_WORD_BOUNDARY:
+      case OP_NOT_WORD_BOUNDARY:
+        {
+        int left_word, right_word;
+
+        if (ptr > start_subject)
+          {
+          const pcre_uchar *temp = ptr - 1;
+          if (temp < md->start_used_ptr) md->start_used_ptr = temp;
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+          if (utf) { BACKCHAR(temp); }
+#endif
+          GETCHARTEST(d, temp);
+#ifdef SUPPORT_UCP
+          if ((md->poptions & PCRE_UCP) != 0)
+            {
+            if (d == '_') left_word = TRUE; else
+              {
+              int cat = UCD_CATEGORY(d);
+              left_word = (cat == ucp_L || cat == ucp_N);
+              }
+            }
+          else
+#endif
+          left_word = d < 256 && (ctypes[d] & ctype_word) != 0;
+          }
+        else left_word = FALSE;
+
+        if (clen > 0)
+          {
+#ifdef SUPPORT_UCP
+          if ((md->poptions & PCRE_UCP) != 0)
+            {
+            if (c == '_') right_word = TRUE; else
+              {
+              int cat = UCD_CATEGORY(c);
+              right_word = (cat == ucp_L || cat == ucp_N);
+              }
+            }
+          else
+#endif
+          right_word = c < 256 && (ctypes[c] & ctype_word) != 0;
+          }
+        else right_word = FALSE;
+
+        if ((left_word == right_word) == (codevalue == OP_NOT_WORD_BOUNDARY))
+          { ADD_ACTIVE(state_offset + 1, 0); }
+        }
+      break;
+
+
+      /*-----------------------------------------------------------------*/
+      /* Check the next character by Unicode property. We will get here only
+      if the support is in the binary; otherwise a compile-time error occurs.
+      */
+
+#ifdef SUPPORT_UCP
+      case OP_PROP:
+      case OP_NOTPROP:
+      if (clen > 0)
+        {
+        BOOL OK;
+        const pcre_uint32 *cp;
+        const ucd_record * prop = GET_UCD(c);
+        switch(code[1])
+          {
+          case PT_ANY:
+          OK = TRUE;
+          break;
+
+          case PT_LAMP:
+          OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
+               prop->chartype == ucp_Lt;
+          break;
+
+          case PT_GC:
+          OK = PRIV(ucp_gentype)[prop->chartype] == code[2];
+          break;
+
+          case PT_PC:
+          OK = prop->chartype == code[2];
+          break;
+
+          case PT_SC:
+          OK = prop->script == code[2];
+          break;
+
+          /* These are specials for combination cases. */
+
+          case PT_ALNUM:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N;
+          break;
+
+          /* Perl space used to exclude VT, but from Perl 5.18 it is included,
+          which means that Perl space and POSIX space are now identical. PCRE
+          was changed at release 8.34. */
+
+          case PT_SPACE:    /* Perl space */
+          case PT_PXSPACE:  /* POSIX space */
+          switch(c)
+            {
+            HSPACE_CASES:
+            VSPACE_CASES:
+            OK = TRUE;
+            break;
+
+            default:
+            OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z;
+            break;
+            }
+          break;
+
+          case PT_WORD:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N ||
+               c == CHAR_UNDERSCORE;
+          break;
+
+          case PT_CLIST:
+          cp = PRIV(ucd_caseless_sets) + code[2];
+          for (;;)
+            {
+            if (c < *cp) { OK = FALSE; break; }
+            if (c == *cp++) { OK = TRUE; break; }
+            }
+          break;
+
+          case PT_UCNC:
+          OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT ||
+               c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) ||
+               c >= 0xe000;
+          break;
+
+          /* Should never occur, but keep compilers from grumbling. */
+
+          default:
+          OK = codevalue != OP_PROP;
+          break;
+          }
+
+        if (OK == (codevalue == OP_PROP)) { ADD_NEW(state_offset + 3, 0); }
+        }
+      break;
+#endif
+
+
+
+/* ========================================================================== */
+      /* These opcodes likewise inspect the subject character, but have an
+      argument that is not a data character. It is one of these opcodes:
+      OP_ANY, OP_ALLANY, OP_DIGIT, OP_NOT_DIGIT, OP_WHITESPACE, OP_NOT_SPACE,
+      OP_WORDCHAR, OP_NOT_WORDCHAR. The value is loaded into d. */
+
+      case OP_TYPEPLUS:
+      case OP_TYPEMINPLUS:
+      case OP_TYPEPOSPLUS:
+      count = current_state->count;  /* Already matched */
+      if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); }
+      if (clen > 0)
+        {
+        if (d == OP_ANY && ptr + 1 >= md->end_subject &&
+            (md->moptions & (PCRE_PARTIAL_HARD)) != 0 &&
+            NLBLOCK->nltype == NLTYPE_FIXED &&
+            NLBLOCK->nllen == 2 &&
+            c == NLBLOCK->nl[0])
+          {
+          could_continue = partial_newline = TRUE;
+          }
+        else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) ||
+            (c < 256 &&
+              (d != OP_ANY || !IS_NEWLINE(ptr)) &&
+              ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0))
+          {
+          if (count > 0 && codevalue == OP_TYPEPOSPLUS)
+            {
+            active_count--;            /* Remove non-match possibility */
+            next_active_state--;
+            }
+          count++;
+          ADD_NEW(state_offset, count);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_TYPEQUERY:
+      case OP_TYPEMINQUERY:
+      case OP_TYPEPOSQUERY:
+      ADD_ACTIVE(state_offset + 2, 0);
+      if (clen > 0)
+        {
+        if (d == OP_ANY && ptr + 1 >= md->end_subject &&
+            (md->moptions & (PCRE_PARTIAL_HARD)) != 0 &&
+            NLBLOCK->nltype == NLTYPE_FIXED &&
+            NLBLOCK->nllen == 2 &&
+            c == NLBLOCK->nl[0])
+          {
+          could_continue = partial_newline = TRUE;
+          }
+        else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) ||
+            (c < 256 &&
+              (d != OP_ANY || !IS_NEWLINE(ptr)) &&
+              ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0))
+          {
+          if (codevalue == OP_TYPEPOSQUERY)
+            {
+            active_count--;            /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW(state_offset + 2, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_TYPESTAR:
+      case OP_TYPEMINSTAR:
+      case OP_TYPEPOSSTAR:
+      ADD_ACTIVE(state_offset + 2, 0);
+      if (clen > 0)
+        {
+        if (d == OP_ANY && ptr + 1 >= md->end_subject &&
+            (md->moptions & (PCRE_PARTIAL_HARD)) != 0 &&
+            NLBLOCK->nltype == NLTYPE_FIXED &&
+            NLBLOCK->nllen == 2 &&
+            c == NLBLOCK->nl[0])
+          {
+          could_continue = partial_newline = TRUE;
+          }
+        else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) ||
+            (c < 256 &&
+              (d != OP_ANY || !IS_NEWLINE(ptr)) &&
+              ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0))
+          {
+          if (codevalue == OP_TYPEPOSSTAR)
+            {
+            active_count--;            /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW(state_offset, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_TYPEEXACT:
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        if (d == OP_ANY && ptr + 1 >= md->end_subject &&
+            (md->moptions & (PCRE_PARTIAL_HARD)) != 0 &&
+            NLBLOCK->nltype == NLTYPE_FIXED &&
+            NLBLOCK->nllen == 2 &&
+            c == NLBLOCK->nl[0])
+          {
+          could_continue = partial_newline = TRUE;
+          }
+        else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) ||
+            (c < 256 &&
+              (d != OP_ANY || !IS_NEWLINE(ptr)) &&
+              ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0))
+          {
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW(state_offset + 1 + IMM2_SIZE + 1, 0); }
+          else
+            { ADD_NEW(state_offset, count); }
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_TYPEUPTO:
+      case OP_TYPEMINUPTO:
+      case OP_TYPEPOSUPTO:
+      ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0);
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        if (d == OP_ANY && ptr + 1 >= md->end_subject &&
+            (md->moptions & (PCRE_PARTIAL_HARD)) != 0 &&
+            NLBLOCK->nltype == NLTYPE_FIXED &&
+            NLBLOCK->nllen == 2 &&
+            c == NLBLOCK->nl[0])
+          {
+          could_continue = partial_newline = TRUE;
+          }
+        else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) ||
+            (c < 256 &&
+              (d != OP_ANY || !IS_NEWLINE(ptr)) &&
+              ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0))
+          {
+          if (codevalue == OP_TYPEPOSUPTO)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW(state_offset + 2 + IMM2_SIZE, 0); }
+          else
+            { ADD_NEW(state_offset, count); }
+          }
+        }
+      break;
+
+/* ========================================================================== */
+      /* These are virtual opcodes that are used when something like
+      OP_TYPEPLUS has OP_PROP, OP_NOTPROP, OP_ANYNL, or OP_EXTUNI as its
+      argument. It keeps the code above fast for the other cases. The argument
+      is in the d variable. */
+
+#ifdef SUPPORT_UCP
+      case OP_PROP_EXTRA + OP_TYPEPLUS:
+      case OP_PROP_EXTRA + OP_TYPEMINPLUS:
+      case OP_PROP_EXTRA + OP_TYPEPOSPLUS:
+      count = current_state->count;           /* Already matched */
+      if (count > 0) { ADD_ACTIVE(state_offset + 4, 0); }
+      if (clen > 0)
+        {
+        BOOL OK;
+        const pcre_uint32 *cp;
+        const ucd_record * prop = GET_UCD(c);
+        switch(code[2])
+          {
+          case PT_ANY:
+          OK = TRUE;
+          break;
+
+          case PT_LAMP:
+          OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
+            prop->chartype == ucp_Lt;
+          break;
+
+          case PT_GC:
+          OK = PRIV(ucp_gentype)[prop->chartype] == code[3];
+          break;
+
+          case PT_PC:
+          OK = prop->chartype == code[3];
+          break;
+
+          case PT_SC:
+          OK = prop->script == code[3];
+          break;
+
+          /* These are specials for combination cases. */
+
+          case PT_ALNUM:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N;
+          break;
+
+          /* Perl space used to exclude VT, but from Perl 5.18 it is included,
+          which means that Perl space and POSIX space are now identical. PCRE
+          was changed at release 8.34. */
+
+          case PT_SPACE:    /* Perl space */
+          case PT_PXSPACE:  /* POSIX space */
+          switch(c)
+            {
+            HSPACE_CASES:
+            VSPACE_CASES:
+            OK = TRUE;
+            break;
+
+            default:
+            OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z;
+            break;
+            }
+          break;
+
+          case PT_WORD:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N ||
+               c == CHAR_UNDERSCORE;
+          break;
+
+          case PT_CLIST:
+          cp = PRIV(ucd_caseless_sets) + code[3];
+          for (;;)
+            {
+            if (c < *cp) { OK = FALSE; break; }
+            if (c == *cp++) { OK = TRUE; break; }
+            }
+          break;
+
+          case PT_UCNC:
+          OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT ||
+               c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) ||
+               c >= 0xe000;
+          break;
+
+          /* Should never occur, but keep compilers from grumbling. */
+
+          default:
+          OK = codevalue != OP_PROP;
+          break;
+          }
+
+        if (OK == (d == OP_PROP))
+          {
+          if (count > 0 && codevalue == OP_PROP_EXTRA + OP_TYPEPOSPLUS)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          count++;
+          ADD_NEW(state_offset, count);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_EXTUNI_EXTRA + OP_TYPEPLUS:
+      case OP_EXTUNI_EXTRA + OP_TYPEMINPLUS:
+      case OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS:
+      count = current_state->count;  /* Already matched */
+      if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); }
+      if (clen > 0)
+        {
+        int lgb, rgb;
+        const pcre_uchar *nptr = ptr + clen;
+        int ncount = 0;
+        if (count > 0 && codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS)
+          {
+          active_count--;           /* Remove non-match possibility */
+          next_active_state--;
+          }
+        lgb = UCD_GRAPHBREAK(c);
+        while (nptr < end_subject)
+          {
+          dlen = 1;
+          if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); }
+          rgb = UCD_GRAPHBREAK(d);
+          if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break;
+          ncount++;
+          lgb = rgb;
+          nptr += dlen;
+          }
+        count++;
+        ADD_NEW_DATA(-state_offset, count, ncount);
+        }
+      break;
+#endif
+
+      /*-----------------------------------------------------------------*/
+      case OP_ANYNL_EXTRA + OP_TYPEPLUS:
+      case OP_ANYNL_EXTRA + OP_TYPEMINPLUS:
+      case OP_ANYNL_EXTRA + OP_TYPEPOSPLUS:
+      count = current_state->count;  /* Already matched */
+      if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); }
+      if (clen > 0)
+        {
+        int ncount = 0;
+        switch (c)
+          {
+          case CHAR_VT:
+          case CHAR_FF:
+          case CHAR_NEL:
+#ifndef EBCDIC
+          case 0x2028:
+          case 0x2029:
+#endif  /* Not EBCDIC */
+          if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break;
+          goto ANYNL01;
+
+          case CHAR_CR:
+          if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1;
+          /* Fall through */
+
+          ANYNL01:
+          case CHAR_LF:
+          if (count > 0 && codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSPLUS)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          count++;
+          ADD_NEW_DATA(-state_offset, count, ncount);
+          break;
+
+          default:
+          break;
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_VSPACE_EXTRA + OP_TYPEPLUS:
+      case OP_VSPACE_EXTRA + OP_TYPEMINPLUS:
+      case OP_VSPACE_EXTRA + OP_TYPEPOSPLUS:
+      count = current_state->count;  /* Already matched */
+      if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); }
+      if (clen > 0)
+        {
+        BOOL OK;
+        switch (c)
+          {
+          VSPACE_CASES:
+          OK = TRUE;
+          break;
+
+          default:
+          OK = FALSE;
+          break;
+          }
+
+        if (OK == (d == OP_VSPACE))
+          {
+          if (count > 0 && codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSPLUS)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          count++;
+          ADD_NEW_DATA(-state_offset, count, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_HSPACE_EXTRA + OP_TYPEPLUS:
+      case OP_HSPACE_EXTRA + OP_TYPEMINPLUS:
+      case OP_HSPACE_EXTRA + OP_TYPEPOSPLUS:
+      count = current_state->count;  /* Already matched */
+      if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); }
+      if (clen > 0)
+        {
+        BOOL OK;
+        switch (c)
+          {
+          HSPACE_CASES:
+          OK = TRUE;
+          break;
+
+          default:
+          OK = FALSE;
+          break;
+          }
+
+        if (OK == (d == OP_HSPACE))
+          {
+          if (count > 0 && codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSPLUS)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          count++;
+          ADD_NEW_DATA(-state_offset, count, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+#ifdef SUPPORT_UCP
+      case OP_PROP_EXTRA + OP_TYPEQUERY:
+      case OP_PROP_EXTRA + OP_TYPEMINQUERY:
+      case OP_PROP_EXTRA + OP_TYPEPOSQUERY:
+      count = 4;
+      goto QS1;
+
+      case OP_PROP_EXTRA + OP_TYPESTAR:
+      case OP_PROP_EXTRA + OP_TYPEMINSTAR:
+      case OP_PROP_EXTRA + OP_TYPEPOSSTAR:
+      count = 0;
+
+      QS1:
+
+      ADD_ACTIVE(state_offset + 4, 0);
+      if (clen > 0)
+        {
+        BOOL OK;
+        const pcre_uint32 *cp;
+        const ucd_record * prop = GET_UCD(c);
+        switch(code[2])
+          {
+          case PT_ANY:
+          OK = TRUE;
+          break;
+
+          case PT_LAMP:
+          OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
+            prop->chartype == ucp_Lt;
+          break;
+
+          case PT_GC:
+          OK = PRIV(ucp_gentype)[prop->chartype] == code[3];
+          break;
+
+          case PT_PC:
+          OK = prop->chartype == code[3];
+          break;
+
+          case PT_SC:
+          OK = prop->script == code[3];
+          break;
+
+          /* These are specials for combination cases. */
+
+          case PT_ALNUM:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N;
+          break;
+
+          /* Perl space used to exclude VT, but from Perl 5.18 it is included,
+          which means that Perl space and POSIX space are now identical. PCRE
+          was changed at release 8.34. */
+
+          case PT_SPACE:    /* Perl space */
+          case PT_PXSPACE:  /* POSIX space */
+          switch(c)
+            {
+            HSPACE_CASES:
+            VSPACE_CASES:
+            OK = TRUE;
+            break;
+
+            default:
+            OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z;
+            break;
+            }
+          break;
+
+          case PT_WORD:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N ||
+               c == CHAR_UNDERSCORE;
+          break;
+
+          case PT_CLIST:
+          cp = PRIV(ucd_caseless_sets) + code[3];
+          for (;;)
+            {
+            if (c < *cp) { OK = FALSE; break; }
+            if (c == *cp++) { OK = TRUE; break; }
+            }
+          break;
+
+          case PT_UCNC:
+          OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT ||
+               c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) ||
+               c >= 0xe000;
+          break;
+
+          /* Should never occur, but keep compilers from grumbling. */
+
+          default:
+          OK = codevalue != OP_PROP;
+          break;
+          }
+
+        if (OK == (d == OP_PROP))
+          {
+          if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSSTAR ||
+              codevalue == OP_PROP_EXTRA + OP_TYPEPOSQUERY)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW(state_offset + count, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_EXTUNI_EXTRA + OP_TYPEQUERY:
+      case OP_EXTUNI_EXTRA + OP_TYPEMINQUERY:
+      case OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY:
+      count = 2;
+      goto QS2;
+
+      case OP_EXTUNI_EXTRA + OP_TYPESTAR:
+      case OP_EXTUNI_EXTRA + OP_TYPEMINSTAR:
+      case OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR:
+      count = 0;
+
+      QS2:
+
+      ADD_ACTIVE(state_offset + 2, 0);
+      if (clen > 0)
+        {
+        int lgb, rgb;
+        const pcre_uchar *nptr = ptr + clen;
+        int ncount = 0;
+        if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR ||
+            codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY)
+          {
+          active_count--;           /* Remove non-match possibility */
+          next_active_state--;
+          }
+        lgb = UCD_GRAPHBREAK(c);
+        while (nptr < end_subject)
+          {
+          dlen = 1;
+          if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); }
+          rgb = UCD_GRAPHBREAK(d);
+          if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break;
+          ncount++;
+          lgb = rgb;
+          nptr += dlen;
+          }
+        ADD_NEW_DATA(-(state_offset + count), 0, ncount);
+        }
+      break;
+#endif
+
+      /*-----------------------------------------------------------------*/
+      case OP_ANYNL_EXTRA + OP_TYPEQUERY:
+      case OP_ANYNL_EXTRA + OP_TYPEMINQUERY:
+      case OP_ANYNL_EXTRA + OP_TYPEPOSQUERY:
+      count = 2;
+      goto QS3;
+
+      case OP_ANYNL_EXTRA + OP_TYPESTAR:
+      case OP_ANYNL_EXTRA + OP_TYPEMINSTAR:
+      case OP_ANYNL_EXTRA + OP_TYPEPOSSTAR:
+      count = 0;
+
+      QS3:
+      ADD_ACTIVE(state_offset + 2, 0);
+      if (clen > 0)
+        {
+        int ncount = 0;
+        switch (c)
+          {
+          case CHAR_VT:
+          case CHAR_FF:
+          case CHAR_NEL:
+#ifndef EBCDIC
+          case 0x2028:
+          case 0x2029:
+#endif  /* Not EBCDIC */
+          if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break;
+          goto ANYNL02;
+
+          case CHAR_CR:
+          if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1;
+          /* Fall through */
+
+          ANYNL02:
+          case CHAR_LF:
+          if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSSTAR ||
+              codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSQUERY)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW_DATA(-(state_offset + (int)count), 0, ncount);
+          break;
+
+          default:
+          break;
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_VSPACE_EXTRA + OP_TYPEQUERY:
+      case OP_VSPACE_EXTRA + OP_TYPEMINQUERY:
+      case OP_VSPACE_EXTRA + OP_TYPEPOSQUERY:
+      count = 2;
+      goto QS4;
+
+      case OP_VSPACE_EXTRA + OP_TYPESTAR:
+      case OP_VSPACE_EXTRA + OP_TYPEMINSTAR:
+      case OP_VSPACE_EXTRA + OP_TYPEPOSSTAR:
+      count = 0;
+
+      QS4:
+      ADD_ACTIVE(state_offset + 2, 0);
+      if (clen > 0)
+        {
+        BOOL OK;
+        switch (c)
+          {
+          VSPACE_CASES:
+          OK = TRUE;
+          break;
+
+          default:
+          OK = FALSE;
+          break;
+          }
+        if (OK == (d == OP_VSPACE))
+          {
+          if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSSTAR ||
+              codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSQUERY)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW_DATA(-(state_offset + (int)count), 0, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_HSPACE_EXTRA + OP_TYPEQUERY:
+      case OP_HSPACE_EXTRA + OP_TYPEMINQUERY:
+      case OP_HSPACE_EXTRA + OP_TYPEPOSQUERY:
+      count = 2;
+      goto QS5;
+
+      case OP_HSPACE_EXTRA + OP_TYPESTAR:
+      case OP_HSPACE_EXTRA + OP_TYPEMINSTAR:
+      case OP_HSPACE_EXTRA + OP_TYPEPOSSTAR:
+      count = 0;
+
+      QS5:
+      ADD_ACTIVE(state_offset + 2, 0);
+      if (clen > 0)
+        {
+        BOOL OK;
+        switch (c)
+          {
+          HSPACE_CASES:
+          OK = TRUE;
+          break;
+
+          default:
+          OK = FALSE;
+          break;
+          }
+
+        if (OK == (d == OP_HSPACE))
+          {
+          if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSSTAR ||
+              codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSQUERY)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW_DATA(-(state_offset + (int)count), 0, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+#ifdef SUPPORT_UCP
+      case OP_PROP_EXTRA + OP_TYPEEXACT:
+      case OP_PROP_EXTRA + OP_TYPEUPTO:
+      case OP_PROP_EXTRA + OP_TYPEMINUPTO:
+      case OP_PROP_EXTRA + OP_TYPEPOSUPTO:
+      if (codevalue != OP_PROP_EXTRA + OP_TYPEEXACT)
+        { ADD_ACTIVE(state_offset + 1 + IMM2_SIZE + 3, 0); }
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        BOOL OK;
+        const pcre_uint32 *cp;
+        const ucd_record * prop = GET_UCD(c);
+        switch(code[1 + IMM2_SIZE + 1])
+          {
+          case PT_ANY:
+          OK = TRUE;
+          break;
+
+          case PT_LAMP:
+          OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll ||
+            prop->chartype == ucp_Lt;
+          break;
+
+          case PT_GC:
+          OK = PRIV(ucp_gentype)[prop->chartype] == code[1 + IMM2_SIZE + 2];
+          break;
+
+          case PT_PC:
+          OK = prop->chartype == code[1 + IMM2_SIZE + 2];
+          break;
+
+          case PT_SC:
+          OK = prop->script == code[1 + IMM2_SIZE + 2];
+          break;
+
+          /* These are specials for combination cases. */
+
+          case PT_ALNUM:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N;
+          break;
+
+          /* Perl space used to exclude VT, but from Perl 5.18 it is included,
+          which means that Perl space and POSIX space are now identical. PCRE
+          was changed at release 8.34. */
+
+          case PT_SPACE:    /* Perl space */
+          case PT_PXSPACE:  /* POSIX space */
+          switch(c)
+            {
+            HSPACE_CASES:
+            VSPACE_CASES:
+            OK = TRUE;
+            break;
+
+            default:
+            OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z;
+            break;
+            }
+          break;
+
+          case PT_WORD:
+          OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+               PRIV(ucp_gentype)[prop->chartype] == ucp_N ||
+               c == CHAR_UNDERSCORE;
+          break;
+
+          case PT_CLIST:
+          cp = PRIV(ucd_caseless_sets) + code[1 + IMM2_SIZE + 2];
+          for (;;)
+            {
+            if (c < *cp) { OK = FALSE; break; }
+            if (c == *cp++) { OK = TRUE; break; }
+            }
+          break;
+
+          case PT_UCNC:
+          OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT ||
+               c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) ||
+               c >= 0xe000;
+          break;
+
+          /* Should never occur, but keep compilers from grumbling. */
+
+          default:
+          OK = codevalue != OP_PROP;
+          break;
+          }
+
+        if (OK == (d == OP_PROP))
+          {
+          if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSUPTO)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW(state_offset + 1 + IMM2_SIZE + 3, 0); }
+          else
+            { ADD_NEW(state_offset, count); }
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_EXTUNI_EXTRA + OP_TYPEEXACT:
+      case OP_EXTUNI_EXTRA + OP_TYPEUPTO:
+      case OP_EXTUNI_EXTRA + OP_TYPEMINUPTO:
+      case OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO:
+      if (codevalue != OP_EXTUNI_EXTRA + OP_TYPEEXACT)
+        { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); }
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        int lgb, rgb;
+        const pcre_uchar *nptr = ptr + clen;
+        int ncount = 0;
+        if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO)
+          {
+          active_count--;           /* Remove non-match possibility */
+          next_active_state--;
+          }
+        lgb = UCD_GRAPHBREAK(c);
+        while (nptr < end_subject)
+          {
+          dlen = 1;
+          if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); }
+          rgb = UCD_GRAPHBREAK(d);
+          if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break;
+          ncount++;
+          lgb = rgb;
+          nptr += dlen;
+          }
+        if (nptr >= end_subject && (md->moptions & PCRE_PARTIAL_HARD) != 0)
+            reset_could_continue = TRUE;
+        if (++count >= (int)GET2(code, 1))
+          { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, ncount); }
+        else
+          { ADD_NEW_DATA(-state_offset, count, ncount); }
+        }
+      break;
+#endif
+
+      /*-----------------------------------------------------------------*/
+      case OP_ANYNL_EXTRA + OP_TYPEEXACT:
+      case OP_ANYNL_EXTRA + OP_TYPEUPTO:
+      case OP_ANYNL_EXTRA + OP_TYPEMINUPTO:
+      case OP_ANYNL_EXTRA + OP_TYPEPOSUPTO:
+      if (codevalue != OP_ANYNL_EXTRA + OP_TYPEEXACT)
+        { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); }
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        int ncount = 0;
+        switch (c)
+          {
+          case CHAR_VT:
+          case CHAR_FF:
+          case CHAR_NEL:
+#ifndef EBCDIC
+          case 0x2028:
+          case 0x2029:
+#endif  /* Not EBCDIC */
+          if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break;
+          goto ANYNL03;
+
+          case CHAR_CR:
+          if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1;
+          /* Fall through */
+
+          ANYNL03:
+          case CHAR_LF:
+          if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSUPTO)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, ncount); }
+          else
+            { ADD_NEW_DATA(-state_offset, count, ncount); }
+          break;
+
+          default:
+          break;
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_VSPACE_EXTRA + OP_TYPEEXACT:
+      case OP_VSPACE_EXTRA + OP_TYPEUPTO:
+      case OP_VSPACE_EXTRA + OP_TYPEMINUPTO:
+      case OP_VSPACE_EXTRA + OP_TYPEPOSUPTO:
+      if (codevalue != OP_VSPACE_EXTRA + OP_TYPEEXACT)
+        { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); }
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        BOOL OK;
+        switch (c)
+          {
+          VSPACE_CASES:
+          OK = TRUE;
+          break;
+
+          default:
+          OK = FALSE;
+          }
+
+        if (OK == (d == OP_VSPACE))
+          {
+          if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSUPTO)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, 0); }
+          else
+            { ADD_NEW_DATA(-state_offset, count, 0); }
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_HSPACE_EXTRA + OP_TYPEEXACT:
+      case OP_HSPACE_EXTRA + OP_TYPEUPTO:
+      case OP_HSPACE_EXTRA + OP_TYPEMINUPTO:
+      case OP_HSPACE_EXTRA + OP_TYPEPOSUPTO:
+      if (codevalue != OP_HSPACE_EXTRA + OP_TYPEEXACT)
+        { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); }
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        BOOL OK;
+        switch (c)
+          {
+          HSPACE_CASES:
+          OK = TRUE;
+          break;
+
+          default:
+          OK = FALSE;
+          break;
+          }
+
+        if (OK == (d == OP_HSPACE))
+          {
+          if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSUPTO)
+            {
+            active_count--;           /* Remove non-match possibility */
+            next_active_state--;
+            }
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, 0); }
+          else
+            { ADD_NEW_DATA(-state_offset, count, 0); }
+          }
+        }
+      break;
+
+/* ========================================================================== */
+      /* These opcodes are followed by a character that is usually compared
+      to the current subject character; it is loaded into d. We still get
+      here even if there is no subject character, because in some cases zero
+      repetitions are permitted. */
+
+      /*-----------------------------------------------------------------*/
+      case OP_CHAR:
+      if (clen > 0 && c == d) { ADD_NEW(state_offset + dlen + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_CHARI:
+      if (clen == 0) break;
+
+#ifdef SUPPORT_UTF
+      if (utf)
+        {
+        if (c == d) { ADD_NEW(state_offset + dlen + 1, 0); } else
+          {
+          unsigned int othercase;
+          if (c < 128)
+            othercase = fcc[c];
+          else
+            /* If we have Unicode property support, we can use it to test the
+            other case of the character. */
+#ifdef SUPPORT_UCP
+            othercase = UCD_OTHERCASE(c);
+#else
+            othercase = NOTACHAR;
+#endif
+
+          if (d == othercase) { ADD_NEW(state_offset + dlen + 1, 0); }
+          }
+        }
+      else
+#endif  /* SUPPORT_UTF */
+      /* Not UTF mode */
+        {
+        if (TABLE_GET(c, lcc, c) == TABLE_GET(d, lcc, d))
+          { ADD_NEW(state_offset + 2, 0); }
+        }
+      break;
+
+
+#ifdef SUPPORT_UCP
+      /*-----------------------------------------------------------------*/
+      /* This is a tricky one because it can match more than one character.
+      Find out how many characters to skip, and then set up a negative state
+      to wait for them to pass before continuing. */
+
+      case OP_EXTUNI:
+      if (clen > 0)
+        {
+        int lgb, rgb;
+        const pcre_uchar *nptr = ptr + clen;
+        int ncount = 0;
+        lgb = UCD_GRAPHBREAK(c);
+        while (nptr < end_subject)
+          {
+          dlen = 1;
+          if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); }
+          rgb = UCD_GRAPHBREAK(d);
+          if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break;
+          ncount++;
+          lgb = rgb;
+          nptr += dlen;
+          }
+        if (nptr >= end_subject && (md->moptions & PCRE_PARTIAL_HARD) != 0)
+            reset_could_continue = TRUE;
+        ADD_NEW_DATA(-(state_offset + 1), 0, ncount);
+        }
+      break;
+#endif
+
+      /*-----------------------------------------------------------------*/
+      /* This is a tricky like EXTUNI because it too can match more than one
+      character (when CR is followed by LF). In this case, set up a negative
+      state to wait for one character to pass before continuing. */
+
+      case OP_ANYNL:
+      if (clen > 0) switch(c)
+        {
+        case CHAR_VT:
+        case CHAR_FF:
+        case CHAR_NEL:
+#ifndef EBCDIC
+        case 0x2028:
+        case 0x2029:
+#endif  /* Not EBCDIC */
+        if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break;
+
+        case CHAR_LF:
+        ADD_NEW(state_offset + 1, 0);
+        break;
+
+        case CHAR_CR:
+        if (ptr + 1 >= end_subject)
+          {
+          ADD_NEW(state_offset + 1, 0);
+          if ((md->moptions & PCRE_PARTIAL_HARD) != 0)
+            reset_could_continue = TRUE;
+          }
+        else if (UCHAR21TEST(ptr + 1) == CHAR_LF)
+          {
+          ADD_NEW_DATA(-(state_offset + 1), 0, 1);
+          }
+        else
+          {
+          ADD_NEW(state_offset + 1, 0);
+          }
+        break;
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_NOT_VSPACE:
+      if (clen > 0) switch(c)
+        {
+        VSPACE_CASES:
+        break;
+
+        default:
+        ADD_NEW(state_offset + 1, 0);
+        break;
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_VSPACE:
+      if (clen > 0) switch(c)
+        {
+        VSPACE_CASES:
+        ADD_NEW(state_offset + 1, 0);
+        break;
+
+        default:
+        break;
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_NOT_HSPACE:
+      if (clen > 0) switch(c)
+        {
+        HSPACE_CASES:
+        break;
+
+        default:
+        ADD_NEW(state_offset + 1, 0);
+        break;
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_HSPACE:
+      if (clen > 0) switch(c)
+        {
+        HSPACE_CASES:
+        ADD_NEW(state_offset + 1, 0);
+        break;
+
+        default:
+        break;
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      /* Match a negated single character casefully. */
+
+      case OP_NOT:
+      if (clen > 0 && c != d) { ADD_NEW(state_offset + dlen + 1, 0); }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      /* Match a negated single character caselessly. */
+
+      case OP_NOTI:
+      if (clen > 0)
+        {
+        pcre_uint32 otherd;
+#ifdef SUPPORT_UTF
+        if (utf && d >= 128)
+          {
+#ifdef SUPPORT_UCP
+          otherd = UCD_OTHERCASE(d);
+#else
+          otherd = d;
+#endif  /* SUPPORT_UCP */
+          }
+        else
+#endif  /* SUPPORT_UTF */
+        otherd = TABLE_GET(d, fcc, d);
+        if (c != d && c != otherd)
+          { ADD_NEW(state_offset + dlen + 1, 0); }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_PLUSI:
+      case OP_MINPLUSI:
+      case OP_POSPLUSI:
+      case OP_NOTPLUSI:
+      case OP_NOTMINPLUSI:
+      case OP_NOTPOSPLUSI:
+      caseless = TRUE;
+      codevalue -= OP_STARI - OP_STAR;
+
+      /* Fall through */
+      case OP_PLUS:
+      case OP_MINPLUS:
+      case OP_POSPLUS:
+      case OP_NOTPLUS:
+      case OP_NOTMINPLUS:
+      case OP_NOTPOSPLUS:
+      count = current_state->count;  /* Already matched */
+      if (count > 0) { ADD_ACTIVE(state_offset + dlen + 1, 0); }
+      if (clen > 0)
+        {
+        pcre_uint32 otherd = NOTACHAR;
+        if (caseless)
+          {
+#ifdef SUPPORT_UTF
+          if (utf && d >= 128)
+            {
+#ifdef SUPPORT_UCP
+            otherd = UCD_OTHERCASE(d);
+#endif  /* SUPPORT_UCP */
+            }
+          else
+#endif  /* SUPPORT_UTF */
+          otherd = TABLE_GET(d, fcc, d);
+          }
+        if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR))
+          {
+          if (count > 0 &&
+              (codevalue == OP_POSPLUS || codevalue == OP_NOTPOSPLUS))
+            {
+            active_count--;             /* Remove non-match possibility */
+            next_active_state--;
+            }
+          count++;
+          ADD_NEW(state_offset, count);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_QUERYI:
+      case OP_MINQUERYI:
+      case OP_POSQUERYI:
+      case OP_NOTQUERYI:
+      case OP_NOTMINQUERYI:
+      case OP_NOTPOSQUERYI:
+      caseless = TRUE;
+      codevalue -= OP_STARI - OP_STAR;
+      /* Fall through */
+      case OP_QUERY:
+      case OP_MINQUERY:
+      case OP_POSQUERY:
+      case OP_NOTQUERY:
+      case OP_NOTMINQUERY:
+      case OP_NOTPOSQUERY:
+      ADD_ACTIVE(state_offset + dlen + 1, 0);
+      if (clen > 0)
+        {
+        pcre_uint32 otherd = NOTACHAR;
+        if (caseless)
+          {
+#ifdef SUPPORT_UTF
+          if (utf && d >= 128)
+            {
+#ifdef SUPPORT_UCP
+            otherd = UCD_OTHERCASE(d);
+#endif  /* SUPPORT_UCP */
+            }
+          else
+#endif  /* SUPPORT_UTF */
+          otherd = TABLE_GET(d, fcc, d);
+          }
+        if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR))
+          {
+          if (codevalue == OP_POSQUERY || codevalue == OP_NOTPOSQUERY)
+            {
+            active_count--;            /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW(state_offset + dlen + 1, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_STARI:
+      case OP_MINSTARI:
+      case OP_POSSTARI:
+      case OP_NOTSTARI:
+      case OP_NOTMINSTARI:
+      case OP_NOTPOSSTARI:
+      caseless = TRUE;
+      codevalue -= OP_STARI - OP_STAR;
+      /* Fall through */
+      case OP_STAR:
+      case OP_MINSTAR:
+      case OP_POSSTAR:
+      case OP_NOTSTAR:
+      case OP_NOTMINSTAR:
+      case OP_NOTPOSSTAR:
+      ADD_ACTIVE(state_offset + dlen + 1, 0);
+      if (clen > 0)
+        {
+        pcre_uint32 otherd = NOTACHAR;
+        if (caseless)
+          {
+#ifdef SUPPORT_UTF
+          if (utf && d >= 128)
+            {
+#ifdef SUPPORT_UCP
+            otherd = UCD_OTHERCASE(d);
+#endif  /* SUPPORT_UCP */
+            }
+          else
+#endif  /* SUPPORT_UTF */
+          otherd = TABLE_GET(d, fcc, d);
+          }
+        if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR))
+          {
+          if (codevalue == OP_POSSTAR || codevalue == OP_NOTPOSSTAR)
+            {
+            active_count--;            /* Remove non-match possibility */
+            next_active_state--;
+            }
+          ADD_NEW(state_offset, 0);
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_EXACTI:
+      case OP_NOTEXACTI:
+      caseless = TRUE;
+      codevalue -= OP_STARI - OP_STAR;
+      /* Fall through */
+      case OP_EXACT:
+      case OP_NOTEXACT:
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        pcre_uint32 otherd = NOTACHAR;
+        if (caseless)
+          {
+#ifdef SUPPORT_UTF
+          if (utf && d >= 128)
+            {
+#ifdef SUPPORT_UCP
+            otherd = UCD_OTHERCASE(d);
+#endif  /* SUPPORT_UCP */
+            }
+          else
+#endif  /* SUPPORT_UTF */
+          otherd = TABLE_GET(d, fcc, d);
+          }
+        if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR))
+          {
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW(state_offset + dlen + 1 + IMM2_SIZE, 0); }
+          else
+            { ADD_NEW(state_offset, count); }
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_UPTOI:
+      case OP_MINUPTOI:
+      case OP_POSUPTOI:
+      case OP_NOTUPTOI:
+      case OP_NOTMINUPTOI:
+      case OP_NOTPOSUPTOI:
+      caseless = TRUE;
+      codevalue -= OP_STARI - OP_STAR;
+      /* Fall through */
+      case OP_UPTO:
+      case OP_MINUPTO:
+      case OP_POSUPTO:
+      case OP_NOTUPTO:
+      case OP_NOTMINUPTO:
+      case OP_NOTPOSUPTO:
+      ADD_ACTIVE(state_offset + dlen + 1 + IMM2_SIZE, 0);
+      count = current_state->count;  /* Number already matched */
+      if (clen > 0)
+        {
+        pcre_uint32 otherd = NOTACHAR;
+        if (caseless)
+          {
+#ifdef SUPPORT_UTF
+          if (utf && d >= 128)
+            {
+#ifdef SUPPORT_UCP
+            otherd = UCD_OTHERCASE(d);
+#endif  /* SUPPORT_UCP */
+            }
+          else
+#endif  /* SUPPORT_UTF */
+          otherd = TABLE_GET(d, fcc, d);
+          }
+        if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR))
+          {
+          if (codevalue == OP_POSUPTO || codevalue == OP_NOTPOSUPTO)
+            {
+            active_count--;             /* Remove non-match possibility */
+            next_active_state--;
+            }
+          if (++count >= (int)GET2(code, 1))
+            { ADD_NEW(state_offset + dlen + 1 + IMM2_SIZE, 0); }
+          else
+            { ADD_NEW(state_offset, count); }
+          }
+        }
+      break;
+
+
+/* ========================================================================== */
+      /* These are the class-handling opcodes */
+
+      case OP_CLASS:
+      case OP_NCLASS:
+      case OP_XCLASS:
+        {
+        BOOL isinclass = FALSE;
+        int next_state_offset;
+        const pcre_uchar *ecode;
+
+        /* For a simple class, there is always just a 32-byte table, and we
+        can set isinclass from it. */
+
+        if (codevalue != OP_XCLASS)
+          {
+          ecode = code + 1 + (32 / sizeof(pcre_uchar));
+          if (clen > 0)
+            {
+            isinclass = (c > 255)? (codevalue == OP_NCLASS) :
+              ((((pcre_uint8 *)(code + 1))[c/8] & (1 << (c&7))) != 0);
+            }
+          }
+
+        /* An extended class may have a table or a list of single characters,
+        ranges, or both, and it may be positive or negative. There's a
+        function that sorts all this out. */
+
+        else
+         {
+         ecode = code + GET(code, 1);
+         if (clen > 0) isinclass = PRIV(xclass)(c, code + 1 + LINK_SIZE, utf);
+         }
+
+        /* At this point, isinclass is set for all kinds of class, and ecode
+        points to the byte after the end of the class. If there is a
+        quantifier, this is where it will be. */
+
+        next_state_offset = (int)(ecode - start_code);
+
+        switch (*ecode)
+          {
+          case OP_CRSTAR:
+          case OP_CRMINSTAR:
+          case OP_CRPOSSTAR:
+          ADD_ACTIVE(next_state_offset + 1, 0);
+          if (isinclass)
+            {
+            if (*ecode == OP_CRPOSSTAR)
+              {
+              active_count--;           /* Remove non-match possibility */
+              next_active_state--;
+              }
+            ADD_NEW(state_offset, 0);
+            }
+          break;
+
+          case OP_CRPLUS:
+          case OP_CRMINPLUS:
+          case OP_CRPOSPLUS:
+          count = current_state->count;  /* Already matched */
+          if (count > 0) { ADD_ACTIVE(next_state_offset + 1, 0); }
+          if (isinclass)
+            {
+            if (count > 0 && *ecode == OP_CRPOSPLUS)
+              {
+              active_count--;           /* Remove non-match possibility */
+              next_active_state--;
+              }
+            count++;
+            ADD_NEW(state_offset, count);
+            }
+          break;
+
+          case OP_CRQUERY:
+          case OP_CRMINQUERY:
+          case OP_CRPOSQUERY:
+          ADD_ACTIVE(next_state_offset + 1, 0);
+          if (isinclass)
+            {
+            if (*ecode == OP_CRPOSQUERY)
+              {
+              active_count--;           /* Remove non-match possibility */
+              next_active_state--;
+              }
+            ADD_NEW(next_state_offset + 1, 0);
+            }
+          break;
+
+          case OP_CRRANGE:
+          case OP_CRMINRANGE:
+          case OP_CRPOSRANGE:
+          count = current_state->count;  /* Already matched */
+          if (count >= (int)GET2(ecode, 1))
+            { ADD_ACTIVE(next_state_offset + 1 + 2 * IMM2_SIZE, 0); }
+          if (isinclass)
+            {
+            int max = (int)GET2(ecode, 1 + IMM2_SIZE);
+            if (*ecode == OP_CRPOSRANGE && count >= (int)GET2(ecode, 1))
+              {
+              active_count--;           /* Remove non-match possibility */
+              next_active_state--;
+              }
+            if (++count >= max && max != 0)   /* Max 0 => no limit */
+              { ADD_NEW(next_state_offset + 1 + 2 * IMM2_SIZE, 0); }
+            else
+              { ADD_NEW(state_offset, count); }
+            }
+          break;
+
+          default:
+          if (isinclass) { ADD_NEW(next_state_offset, 0); }
+          break;
+          }
+        }
+      break;
+
+/* ========================================================================== */
+      /* These are the opcodes for fancy brackets of various kinds. We have
+      to use recursion in order to handle them. The "always failing" assertion
+      (?!) is optimised to OP_FAIL when compiling, so we have to support that,
+      though the other "backtracking verbs" are not supported. */
+
+      case OP_FAIL:
+      forced_fail++;    /* Count FAILs for multiple states */
+      break;
+
+      case OP_ASSERT:
+      case OP_ASSERT_NOT:
+      case OP_ASSERTBACK:
+      case OP_ASSERTBACK_NOT:
+        {
+        int rc;
+        int local_offsets[2];
+        int local_workspace[1000];
+        const pcre_uchar *endasscode = code + GET(code, 1);
+
+        while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1);
+
+        rc = internal_dfa_exec(
+          md,                                   /* static match data */
+          code,                                 /* this subexpression's code */
+          ptr,                                  /* where we currently are */
+          (int)(ptr - start_subject),           /* start offset */
+          local_offsets,                        /* offset vector */
+          sizeof(local_offsets)/sizeof(int),    /* size of same */
+          local_workspace,                      /* workspace vector */
+          sizeof(local_workspace)/sizeof(int),  /* size of same */
+          rlevel);                              /* function recursion level */
+
+        if (rc == PCRE_ERROR_DFA_UITEM) return rc;
+        if ((rc >= 0) == (codevalue == OP_ASSERT || codevalue == OP_ASSERTBACK))
+            { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_COND:
+      case OP_SCOND:
+        {
+        int local_offsets[1000];
+        int local_workspace[1000];
+        int codelink = GET(code, 1);
+        int condcode;
+
+        /* Because of the way auto-callout works during compile, a callout item
+        is inserted between OP_COND and an assertion condition. This does not
+        happen for the other conditions. */
+
+        if (code[LINK_SIZE+1] == OP_CALLOUT)
+          {
+          rrc = 0;
+          if (PUBL(callout) != NULL)
+            {
+            PUBL(callout_block) cb;
+            cb.version          = 1;   /* Version 1 of the callout block */
+            cb.callout_number   = code[LINK_SIZE+2];
+            cb.offset_vector    = offsets;
+#if defined COMPILE_PCRE8
+            cb.subject          = (PCRE_SPTR)start_subject;
+#elif defined COMPILE_PCRE16
+            cb.subject          = (PCRE_SPTR16)start_subject;
+#elif defined COMPILE_PCRE32
+            cb.subject          = (PCRE_SPTR32)start_subject;
+#endif
+            cb.subject_length   = (int)(end_subject - start_subject);
+            cb.start_match      = (int)(current_subject - start_subject);
+            cb.current_position = (int)(ptr - start_subject);
+            cb.pattern_position = GET(code, LINK_SIZE + 3);
+            cb.next_item_length = GET(code, 3 + 2*LINK_SIZE);
+            cb.capture_top      = 1;
+            cb.capture_last     = -1;
+            cb.callout_data     = md->callout_data;
+            cb.mark             = NULL;   /* No (*MARK) support */
+            if ((rrc = (*PUBL(callout))(&cb)) < 0) return rrc;   /* Abandon */
+            }
+          if (rrc > 0) break;                      /* Fail this thread */
+          code += PRIV(OP_lengths)[OP_CALLOUT];    /* Skip callout data */
+          }
+
+        condcode = code[LINK_SIZE+1];
+
+        /* Back reference conditions and duplicate named recursion conditions
+        are not supported */
+
+        if (condcode == OP_CREF || condcode == OP_DNCREF ||
+            condcode == OP_DNRREF)
+          return PCRE_ERROR_DFA_UCOND;
+
+        /* The DEFINE condition is always false, and the assertion (?!) is
+        converted to OP_FAIL. */
+
+        if (condcode == OP_DEF || condcode == OP_FAIL)
+          { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); }
+
+        /* The only supported version of OP_RREF is for the value RREF_ANY,
+        which means "test if in any recursion". We can't test for specifically
+        recursed groups. */
+
+        else if (condcode == OP_RREF)
+          {
+          int value = GET2(code, LINK_SIZE + 2);
+          if (value != RREF_ANY) return PCRE_ERROR_DFA_UCOND;
+          if (md->recursive != NULL)
+            { ADD_ACTIVE(state_offset + LINK_SIZE + 2 + IMM2_SIZE, 0); }
+          else { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); }
+          }
+
+        /* Otherwise, the condition is an assertion */
+
+        else
+          {
+          int rc;
+          const pcre_uchar *asscode = code + LINK_SIZE + 1;
+          const pcre_uchar *endasscode = asscode + GET(asscode, 1);
+
+          while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1);
+
+          rc = internal_dfa_exec(
+            md,                                   /* fixed match data */
+            asscode,                              /* this subexpression's code */
+            ptr,                                  /* where we currently are */
+            (int)(ptr - start_subject),           /* start offset */
+            local_offsets,                        /* offset vector */
+            sizeof(local_offsets)/sizeof(int),    /* size of same */
+            local_workspace,                      /* workspace vector */
+            sizeof(local_workspace)/sizeof(int),  /* size of same */
+            rlevel);                              /* function recursion level */
+
+          if (rc == PCRE_ERROR_DFA_UITEM) return rc;
+          if ((rc >= 0) ==
+                (condcode == OP_ASSERT || condcode == OP_ASSERTBACK))
+            { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); }
+          else
+            { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); }
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_RECURSE:
+        {
+        dfa_recursion_info *ri;
+        int local_offsets[1000];
+        int local_workspace[1000];
+        const pcre_uchar *callpat = start_code + GET(code, 1);
+        int recno = (callpat == md->start_code)? 0 :
+          GET2(callpat, 1 + LINK_SIZE);
+        int rc;
+
+        DPRINTF(("%.*sStarting regex recursion\n", rlevel*2-2, SP));
+
+        /* Check for repeating a recursion without advancing the subject
+        pointer. This should catch convoluted mutual recursions. (Some simple
+        cases are caught at compile time.) */
+
+        for (ri = md->recursive; ri != NULL; ri = ri->prevrec)
+          if (recno == ri->group_num && ptr == ri->subject_position)
+            return PCRE_ERROR_RECURSELOOP;
+
+        /* Remember this recursion and where we started it so as to
+        catch infinite loops. */
+
+        new_recursive.group_num = recno;
+        new_recursive.subject_position = ptr;
+        new_recursive.prevrec = md->recursive;
+        md->recursive = &new_recursive;
+
+        rc = internal_dfa_exec(
+          md,                                   /* fixed match data */
+          callpat,                              /* this subexpression's code */
+          ptr,                                  /* where we currently are */
+          (int)(ptr - start_subject),           /* start offset */
+          local_offsets,                        /* offset vector */
+          sizeof(local_offsets)/sizeof(int),    /* size of same */
+          local_workspace,                      /* workspace vector */
+          sizeof(local_workspace)/sizeof(int),  /* size of same */
+          rlevel);                              /* function recursion level */
+
+        md->recursive = new_recursive.prevrec;  /* Done this recursion */
+
+        DPRINTF(("%.*sReturn from regex recursion: rc=%d\n", rlevel*2-2, SP,
+          rc));
+
+        /* Ran out of internal offsets */
+
+        if (rc == 0) return PCRE_ERROR_DFA_RECURSE;
+
+        /* For each successful matched substring, set up the next state with a
+        count of characters to skip before trying it. Note that the count is in
+        characters, not bytes. */
+
+        if (rc > 0)
+          {
+          for (rc = rc*2 - 2; rc >= 0; rc -= 2)
+            {
+            int charcount = local_offsets[rc+1] - local_offsets[rc];
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+            if (utf)
+              {
+              const pcre_uchar *p = start_subject + local_offsets[rc];
+              const pcre_uchar *pp = start_subject + local_offsets[rc+1];
+              while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--;
+              }
+#endif
+            if (charcount > 0)
+              {
+              ADD_NEW_DATA(-(state_offset + LINK_SIZE + 1), 0, (charcount - 1));
+              }
+            else
+              {
+              ADD_ACTIVE(state_offset + LINK_SIZE + 1, 0);
+              }
+            }
+          }
+        else if (rc != PCRE_ERROR_NOMATCH) return rc;
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_BRAPOS:
+      case OP_SBRAPOS:
+      case OP_CBRAPOS:
+      case OP_SCBRAPOS:
+      case OP_BRAPOSZERO:
+        {
+        int charcount, matched_count;
+        const pcre_uchar *local_ptr = ptr;
+        BOOL allow_zero;
+
+        if (codevalue == OP_BRAPOSZERO)
+          {
+          allow_zero = TRUE;
+          codevalue = *(++code);  /* Codevalue will be one of above BRAs */
+          }
+        else allow_zero = FALSE;
+
+        /* Loop to match the subpattern as many times as possible as if it were
+        a complete pattern. */
+
+        for (matched_count = 0;; matched_count++)
+          {
+          int local_offsets[2];
+          int local_workspace[1000];
+
+          int rc = internal_dfa_exec(
+            md,                                   /* fixed match data */
+            code,                                 /* this subexpression's code */
+            local_ptr,                            /* where we currently are */
+            (int)(ptr - start_subject),           /* start offset */
+            local_offsets,                        /* offset vector */
+            sizeof(local_offsets)/sizeof(int),    /* size of same */
+            local_workspace,                      /* workspace vector */
+            sizeof(local_workspace)/sizeof(int),  /* size of same */
+            rlevel);                              /* function recursion level */
+
+          /* Failed to match */
+
+          if (rc < 0)
+            {
+            if (rc != PCRE_ERROR_NOMATCH) return rc;
+            break;
+            }
+
+          /* Matched: break the loop if zero characters matched. */
+
+          charcount = local_offsets[1] - local_offsets[0];
+          if (charcount == 0) break;
+          local_ptr += charcount;    /* Advance temporary position ptr */
+          }
+
+        /* At this point we have matched the subpattern matched_count
+        times, and local_ptr is pointing to the character after the end of the
+        last match. */
+
+        if (matched_count > 0 || allow_zero)
+          {
+          const pcre_uchar *end_subpattern = code;
+          int next_state_offset;
+
+          do { end_subpattern += GET(end_subpattern, 1); }
+            while (*end_subpattern == OP_ALT);
+          next_state_offset =
+            (int)(end_subpattern - start_code + LINK_SIZE + 1);
+
+          /* Optimization: if there are no more active states, and there
+          are no new states yet set up, then skip over the subject string
+          right here, to save looping. Otherwise, set up the new state to swing
+          into action when the end of the matched substring is reached. */
+
+          if (i + 1 >= active_count && new_count == 0)
+            {
+            ptr = local_ptr;
+            clen = 0;
+            ADD_NEW(next_state_offset, 0);
+            }
+          else
+            {
+            const pcre_uchar *p = ptr;
+            const pcre_uchar *pp = local_ptr;
+            charcount = (int)(pp - p);
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+            if (utf) while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--;
+#endif
+            ADD_NEW_DATA(-next_state_offset, 0, (charcount - 1));
+            }
+          }
+        }
+      break;
+
+      /*-----------------------------------------------------------------*/
+      case OP_ONCE:
+      case OP_ONCE_NC:
+        {
+        int local_offsets[2];
+        int local_workspace[1000];
+
+        int rc = internal_dfa_exec(
+          md,                                   /* fixed match data */
+          code,                                 /* this subexpression's code */
+          ptr,                                  /* where we currently are */
+          (int)(ptr - start_subject),           /* start offset */
+          local_offsets,                        /* offset vector */
+          sizeof(local_offsets)/sizeof(int),    /* size of same */
+          local_workspace,                      /* workspace vector */
+          sizeof(local_workspace)/sizeof(int),  /* size of same */
+          rlevel);                              /* function recursion level */
+
+        if (rc >= 0)
+          {
+          const pcre_uchar *end_subpattern = code;
+          int charcount = local_offsets[1] - local_offsets[0];
+          int next_state_offset, repeat_state_offset;
+
+          do { end_subpattern += GET(end_subpattern, 1); }
+            while (*end_subpattern == OP_ALT);
+          next_state_offset =
+            (int)(end_subpattern - start_code + LINK_SIZE + 1);
+
+          /* If the end of this subpattern is KETRMAX or KETRMIN, we must
+          arrange for the repeat state also to be added to the relevant list.
+          Calculate the offset, or set -1 for no repeat. */
+
+          repeat_state_offset = (*end_subpattern == OP_KETRMAX ||
+                                 *end_subpattern == OP_KETRMIN)?
+            (int)(end_subpattern - start_code - GET(end_subpattern, 1)) : -1;
+
+          /* If we have matched an empty string, add the next state at the
+          current character pointer. This is important so that the duplicate
+          checking kicks in, which is what breaks infinite loops that match an
+          empty string. */
+
+          if (charcount == 0)
+            {
+            ADD_ACTIVE(next_state_offset, 0);
+            }
+
+          /* Optimization: if there are no more active states, and there
+          are no new states yet set up, then skip over the subject string
+          right here, to save looping. Otherwise, set up the new state to swing
+          into action when the end of the matched substring is reached. */
+
+          else if (i + 1 >= active_count && new_count == 0)
+            {
+            ptr += charcount;
+            clen = 0;
+            ADD_NEW(next_state_offset, 0);
+
+            /* If we are adding a repeat state at the new character position,
+            we must fudge things so that it is the only current state.
+            Otherwise, it might be a duplicate of one we processed before, and
+            that would cause it to be skipped. */
+
+            if (repeat_state_offset >= 0)
+              {
+              next_active_state = active_states;
+              active_count = 0;
+              i = -1;
+              ADD_ACTIVE(repeat_state_offset, 0);
+              }
+            }
+          else
+            {
+#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
+            if (utf)
+              {
+              const pcre_uchar *p = start_subject + local_offsets[0];
+              const pcre_uchar *pp = start_subject + local_offsets[1];
+              while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--;
+              }
+#endif
+            ADD_NEW_DATA(-next_state_offset, 0, (charcount - 1));
+            if (repeat_state_offset >= 0)
+              { ADD_NEW_DATA(-repeat_state_offset, 0, (charcount - 1)); }
+            }
+          }
+        else if (rc != PCRE_ERROR_NOMATCH) return rc;
+        }
+      break;
+
+
+/* ========================================================================== */
+      /* Handle callouts */
+
+      case OP_CALLOUT:
+      rrc = 0;
+      if (PUBL(callout) != NULL)
+        {
+        PUBL(callout_block) cb;
+        cb.version          = 1;   /* Version 1 of the callout block */
+        cb.callout_number   = code[1];
+        cb.offset_vector    = offsets;
+#if defined COMPILE_PCRE8
+        cb.subject          = (PCRE_SPTR)start_subject;
+#elif defined COMPILE_PCRE16
+        cb.subject          = (PCRE_SPTR16)start_subject;
+#elif defined COMPILE_PCRE32
+        cb.subject          = (PCRE_SPTR32)start_subject;
+#endif
+        cb.subject_length   = (int)(end_subject - start_subject);
+        cb.start_match      = (int)(current_subject - start_subject);
+        cb.current_position = (int)(ptr - start_subject);
+        cb.pattern_position = GET(code, 2);
+        cb.next_item_length = GET(code, 2 + LINK_SIZE);
+        cb.capture_top      = 1;
+        cb.capture_last     = -1;
+        cb.callout_data     = md->callout_data;
+        cb.mark             = NULL;   /* No (*MARK) support */
+        if ((rrc = (*PUBL(callout))(&cb)) < 0) return rrc;   /* Abandon */
+        }
+      if (rrc == 0)
+        { ADD_ACTIVE(state_offset + PRIV(OP_lengths)[OP_CALLOUT], 0); }
+      break;
+
+
+/* ========================================================================== */
+      default:        /* Unsupported opcode */
+      return PCRE_ERROR_DFA_UITEM;
+      }
+
+    NEXT_ACTIVE_STATE: continue;
+
+    }      /* End of loop scanning active states */
+
+  /* We have finished the processing at the current subject character. If no
+  new states have been set for the next character, we have found all the
+  matches that we are going to find. If we are at the top level and partial
+  matching has been requested, check for appropriate conditions.
+
+  The "forced_ fail" variable counts the number of (*F) encountered for the
+  character. If it is equal to the original active_count (saved in
+  workspace[1]) it means that (*F) was found on every active state. In this
+  case we don't want to give a partial match.
+
+  The "could_continue" variable is true if a state could have continued but
+  for the fact that the end of the subject was reached. */
+
+  if (new_count <= 0)
+    {
+    if (rlevel == 1 &&                               /* Top level, and */
+        could_continue &&                            /* Some could go on, and */
+        forced_fail != workspace[1] &&               /* Not all forced fail & */
+        (                                            /* either... */
+        (md->moptions & PCRE_PARTIAL_HARD) != 0      /* Hard partial */
+        ||                                           /* or... */
+        ((md->moptions & PCRE_PARTIAL_SOFT) != 0 &&  /* Soft partial and */
+         match_count < 0)                            /* no matches */
+        ) &&                                         /* And... */
+        (
+        partial_newline ||                           /* Either partial NL */
+          (                                          /* or ... */
+          ptr >= end_subject &&                /* End of subject and */
+          ptr > md->start_used_ptr)            /* Inspected non-empty string */
+          )
+        )
+      match_count = PCRE_ERROR_PARTIAL;
+    DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n"
+      "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel, match_count,
+      rlevel*2-2, SP));
+    break;        /* In effect, "return", but see the comment below */
+    }
+
+  /* One or more states are active for the next character. */
+
+  ptr += clen;    /* Advance to next subject character */
+  }               /* Loop to move along the subject string */
+
+/* Control gets here from "break" a few lines above. We do it this way because
+if we use "return" above, we have compiler trouble. Some compilers warn if
+there's nothing here because they think the function doesn't return a value. On
+the other hand, if we put a dummy statement here, some more clever compilers
+complain that it can't be reached. Sigh. */
+
+return match_count;
+}
+
+
+
+
+/*************************************************
+*    Execute a Regular Expression - DFA engine   *
+*************************************************/
+
+/* This external function applies a compiled re to a subject string using a DFA
+engine. This function calls the internal function multiple times if the pattern
+is not anchored.
+
+Arguments:
+  argument_re     points to the compiled expression
+  extra_data      points to extra data or is NULL
+  subject         points to the subject string
+  length          length of subject string (may contain binary zeros)
+  start_offset    where to start in the subject string
+  options         option bits
+  offsets         vector of match offsets
+  offsetcount     size of same
+  workspace       workspace vector
+  wscount         size of same
+
+Returns:          > 0 => number of match offset pairs placed in offsets
+                  = 0 => offsets overflowed; longest matches are present
+                   -1 => failed to match
+                 < -1 => some kind of unexpected problem
+*/
+
+#if defined COMPILE_PCRE8
+PCRE_EXP_DEFN int PCRE_CALL_CONVENTION
+pcre_dfa_exec(const pcre *argument_re, const pcre_extra *extra_data,
+  const char *subject, int length, int start_offset, int options, int *offsets,
+  int offsetcount, int *workspace, int wscount)
+#elif defined COMPILE_PCRE16
+PCRE_EXP_DEFN int PCRE_CALL_CONVENTION
+pcre16_dfa_exec(const pcre16 *argument_re, const pcre16_extra *extra_data,
+  PCRE_SPTR16 subject, int length, int start_offset, int options, int *offsets,
+  int offsetcount, int *workspace, int wscount)
+#elif defined COMPILE_PCRE32
+PCRE_EXP_DEFN int PCRE_CALL_CONVENTION
+pcre32_dfa_exec(const pcre32 *argument_re, const pcre32_extra *extra_data,
+  PCRE_SPTR32 subject, int length, int start_offset, int options, int *offsets,
+  int offsetcount, int *workspace, int wscount)
+#endif
+{
+REAL_PCRE *re = (REAL_PCRE *)argument_re;
+dfa_match_data match_block;
+dfa_match_data *md = &match_block;
+BOOL utf, anchored, startline, firstline;
+const pcre_uchar *current_subject, *end_subject;
+const pcre_study_data *study = NULL;
+
+const pcre_uchar *req_char_ptr;
+const pcre_uint8 *start_bits = NULL;
+BOOL has_first_char = FALSE;
+BOOL has_req_char = FALSE;
+pcre_uchar first_char = 0;
+pcre_uchar first_char2 = 0;
+pcre_uchar req_char = 0;
+pcre_uchar req_char2 = 0;
+int newline;
+
+/* Plausibility checks */
+
+if ((options & ~PUBLIC_DFA_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION;
+if (re == NULL || subject == NULL || workspace == NULL ||
+   (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL;
+if (offsetcount < 0) return PCRE_ERROR_BADCOUNT;
+if (wscount < 20) return PCRE_ERROR_DFA_WSSIZE;
+if (length < 0) return PCRE_ERROR_BADLENGTH;
+if (start_offset < 0 || start_offset > length) return PCRE_ERROR_BADOFFSET;
+
+/* Check that the first field in the block is the magic number. If it is not,
+return with PCRE_ERROR_BADMAGIC. However, if the magic number is equal to
+REVERSED_MAGIC_NUMBER we return with PCRE_ERROR_BADENDIANNESS, which
+means that the pattern is likely compiled with different endianness. */
+
+if (re->magic_number != MAGIC_NUMBER)
+  return re->magic_number == REVERSED_MAGIC_NUMBER?
+    PCRE_ERROR_BADENDIANNESS:PCRE_ERROR_BADMAGIC;
+if ((re->flags & PCRE_MODE) == 0) return PCRE_ERROR_BADMODE;
+
+/* If restarting after a partial match, do some sanity checks on the contents
+of the workspace. */
+
+if ((options & PCRE_DFA_RESTART) != 0)
+  {
+  if ((workspace[0] & (-2)) != 0 || workspace[1] < 1 ||
+    workspace[1] > (wscount - 2)/INTS_PER_STATEBLOCK)
+      return PCRE_ERROR_DFA_BADRESTART;
+  }
+
+/* Set up study, callout, and table data */
+
+md->tables = re->tables;
+md->callout_data = NULL;
+
+if (extra_data != NULL)
+  {
+  unsigned long int flags = extra_data->flags;
+  if ((flags & PCRE_EXTRA_STUDY_DATA) != 0)
+    study = (const pcre_study_data *)extra_data->study_data;
+  if ((flags & PCRE_EXTRA_MATCH_LIMIT) != 0) return PCRE_ERROR_DFA_UMLIMIT;
+  if ((flags & PCRE_EXTRA_MATCH_LIMIT_RECURSION) != 0)
+    return PCRE_ERROR_DFA_UMLIMIT;
+  if ((flags & PCRE_EXTRA_CALLOUT_DATA) != 0)
+    md->callout_data = extra_data->callout_data;
+  if ((flags & PCRE_EXTRA_TABLES) != 0)
+    md->tables = extra_data->tables;
+  }
+
+/* Set some local values */
+
+current_subject = (const pcre_uchar *)subject + start_offset;
+end_subject = (const pcre_uchar *)subject + length;
+req_char_ptr = current_subject - 1;
+
+#ifdef SUPPORT_UTF
+/* PCRE_UTF(16|32) have the same value as PCRE_UTF8. */
+utf = (re->options & PCRE_UTF8) != 0;
+#else
+utf = FALSE;
+#endif
+
+anchored = (options & (PCRE_ANCHORED|PCRE_DFA_RESTART)) != 0 ||
+  (re->options & PCRE_ANCHORED) != 0;
+
+/* The remaining fixed data for passing around. */
+
+md->start_code = (const pcre_uchar *)argument_re +
+    re->name_table_offset + re->name_count * re->name_entry_size;
+md->start_subject = (const pcre_uchar *)subject;
+md->end_subject = end_subject;
+md->start_offset = start_offset;
+md->moptions = options;
+md->poptions = re->options;
+
+/* If the BSR option is not set at match time, copy what was set
+at compile time. */
+
+if ((md->moptions & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) == 0)
+  {
+  if ((re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) != 0)
+    md->moptions |= re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE);
+#ifdef BSR_ANYCRLF
+  else md->moptions |= PCRE_BSR_ANYCRLF;
+#endif
+  }
+
+/* Handle different types of newline. The three bits give eight cases. If
+nothing is set at run time, whatever was used at compile time applies. */
+
+switch ((((options & PCRE_NEWLINE_BITS) == 0)? re->options : (pcre_uint32)options) &
+         PCRE_NEWLINE_BITS)
+  {
+  case 0: newline = NEWLINE; break;   /* Compile-time default */
+  case PCRE_NEWLINE_CR: newline = CHAR_CR; break;
+  case PCRE_NEWLINE_LF: newline = CHAR_NL; break;
+  case PCRE_NEWLINE_CR+
+       PCRE_NEWLINE_LF: newline = (CHAR_CR << 8) | CHAR_NL; break;
+  case PCRE_NEWLINE_ANY: newline = -1; break;
+  case PCRE_NEWLINE_ANYCRLF: newline = -2; break;
+  default: return PCRE_ERROR_BADNEWLINE;
+  }
+
+if (newline == -2)
+  {
+  md->nltype = NLTYPE_ANYCRLF;
+  }
+else if (newline < 0)
+  {
+  md->nltype = NLTYPE_ANY;
+  }
+else
+  {
+  md->nltype = NLTYPE_FIXED;
+  if (newline > 255)
+    {
+    md->nllen = 2;
+    md->nl[0] = (newline >> 8) & 255;
+    md->nl[1] = newline & 255;
+    }
+  else
+    {
+    md->nllen = 1;
+    md->nl[0] = newline;
+    }
+  }
+
+/* Check a UTF-8 string if required. Unfortunately there's no way of passing
+back the character offset. */
+
+#ifdef SUPPORT_UTF
+if (utf && (options & PCRE_NO_UTF8_CHECK) == 0)
+  {
+  int erroroffset;
+  int errorcode = PRIV(valid_utf)((pcre_uchar *)subject, length, &erroroffset);
+  if (errorcode != 0)
+    {
+    if (offsetcount >= 2)
+      {
+      offsets[0] = erroroffset;
+      offsets[1] = errorcode;
+      }
+#if defined COMPILE_PCRE8
+    return (errorcode <= PCRE_UTF8_ERR5 && (options & PCRE_PARTIAL_HARD) != 0) ?
+      PCRE_ERROR_SHORTUTF8 : PCRE_ERROR_BADUTF8;
+#elif defined COMPILE_PCRE16
+    return (errorcode <= PCRE_UTF16_ERR1 && (options & PCRE_PARTIAL_HARD) != 0) ?
+      PCRE_ERROR_SHORTUTF16 : PCRE_ERROR_BADUTF16;
+#elif defined COMPILE_PCRE32
+    return PCRE_ERROR_BADUTF32;
+#endif
+    }
+#if defined COMPILE_PCRE8 || defined COMPILE_PCRE16
+  if (start_offset > 0 && start_offset < length &&
+        NOT_FIRSTCHAR(((PCRE_PUCHAR)subject)[start_offset]))
+    return PCRE_ERROR_BADUTF8_OFFSET;
+#endif
+  }
+#endif
+
+/* If the exec call supplied NULL for tables, use the inbuilt ones. This
+is a feature that makes it possible to save compiled regex and re-use them
+in other programs later. */
+
+if (md->tables == NULL) md->tables = PRIV(default_tables);
+
+/* The "must be at the start of a line" flags are used in a loop when finding
+where to start. */
+
+startline = (re->flags & PCRE_STARTLINE) != 0;
+firstline = (re->options & PCRE_FIRSTLINE) != 0;
+
+/* Set up the first character to match, if available. The first_byte value is
+never set for an anchored regular expression, but the anchoring may be forced
+at run time, so we have to test for anchoring. The first char may be unset for
+an unanchored pattern, of course. If there's no first char and the pattern was
+studied, there may be a bitmap of possible first characters. */
+
+if (!anchored)
+  {
+  if ((re->flags & PCRE_FIRSTSET) != 0)
+    {
+    has_first_char = TRUE;
+    first_char = first_char2 = (pcre_uchar)(re->first_char);
+    if ((re->flags & PCRE_FCH_CASELESS) != 0)
+      {
+      first_char2 = TABLE_GET(first_char, md->tables + fcc_offset, first_char);
+#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8)
+      if (utf && first_char > 127)
+        first_char2 = UCD_OTHERCASE(first_char);
+#endif
+      }
+    }
+  else
+    {
+    if (!startline && study != NULL &&
+         (study->flags & PCRE_STUDY_MAPPED) != 0)
+      start_bits = study->start_bits;
+    }
+  }
+
+/* For anchored or unanchored matches, there may be a "last known required
+character" set. */
+
+if ((re->flags & PCRE_REQCHSET) != 0)
+  {
+  has_req_char = TRUE;
+  req_char = req_char2 = (pcre_uchar)(re->req_char);
+  if ((re->flags & PCRE_RCH_CASELESS) != 0)
+    {
+    req_char2 = TABLE_GET(req_char, md->tables + fcc_offset, req_char);
+#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8)
+    if (utf && req_char > 127)
+      req_char2 = UCD_OTHERCASE(req_char);
+#endif
+    }
+  }
+
+/* Call the main matching function, looping for a non-anchored regex after a
+failed match. If not restarting, perform certain optimizations at the start of
+a match. */
+
+for (;;)
+  {
+  int rc;
+
+  if ((options & PCRE_DFA_RESTART) == 0)
+    {
+    const pcre_uchar *save_end_subject = end_subject;
+
+    /* If firstline is TRUE, the start of the match is constrained to the first
+    line of a multiline string. Implement this by temporarily adjusting
+    end_subject so that we stop scanning at a newline. If the match fails at
+    the newline, later code breaks this loop. */
+
+    if (firstline)
+      {
+      PCRE_PUCHAR t = current_subject;
+#ifdef SUPPORT_UTF
+      if (utf)
+        {
+        while (t < md->end_subject && !IS_NEWLINE(t))
+          {
+          t++;
+          ACROSSCHAR(t < end_subject, *t, t++);
+          }
+        }
+      else
+#endif
+      while (t < md->end_subject && !IS_NEWLINE(t)) t++;
+      end_subject = t;
+      }
+
+    /* There are some optimizations that avoid running the match if a known
+    starting point is not found. However, there is an option that disables
+    these, for testing and for ensuring that all callouts do actually occur.
+    The option can be set in the regex by (*NO_START_OPT) or passed in
+    match-time options. */
+
+    if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0)
+      {
+      /* Advance to a known first pcre_uchar (i.e. data item) */
+
+      if (has_first_char)
+        {
+        if (first_char != first_char2)
+          {
+          pcre_uchar csc;
+          while (current_subject < end_subject &&
+                 (csc = UCHAR21TEST(current_subject)) != first_char && csc != first_char2)
+            current_subject++;
+          }
+        else
+          while (current_subject < end_subject &&
+                 UCHAR21TEST(current_subject) != first_char)
+            current_subject++;
+        }
+
+      /* Or to just after a linebreak for a multiline match if possible */
+
+      else if (startline)
+        {
+        if (current_subject > md->start_subject + start_offset)
+          {
+#ifdef SUPPORT_UTF
+          if (utf)
+            {
+            while (current_subject < end_subject &&
+                   !WAS_NEWLINE(current_subject))
+              {
+              current_subject++;
+              ACROSSCHAR(current_subject < end_subject, *current_subject,
+                current_subject++);
+              }
+            }
+          else
+#endif
+          while (current_subject < end_subject && !WAS_NEWLINE(current_subject))
+            current_subject++;
+
+          /* If we have just passed a CR and the newline option is ANY or
+          ANYCRLF, and we are now at a LF, advance the match position by one
+          more character. */
+
+          if (UCHAR21TEST(current_subject - 1) == CHAR_CR &&
+               (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) &&
+               current_subject < end_subject &&
+               UCHAR21TEST(current_subject) == CHAR_NL)
+            current_subject++;
+          }
+        }
+
+      /* Advance to a non-unique first pcre_uchar after study */
+
+      else if (start_bits != NULL)
+        {
+        while (current_subject < end_subject)
+          {
+          register pcre_uint32 c = UCHAR21TEST(current_subject);
+#ifndef COMPILE_PCRE8
+          if (c > 255) c = 255;
+#endif
+          if ((start_bits[c/8] & (1 << (c&7))) != 0) break;
+          current_subject++;
+          }
+        }
+      }
+
+    /* Restore fudged end_subject */
+
+    end_subject = save_end_subject;
+
+    /* The following two optimizations are disabled for partial matching or if
+    disabling is explicitly requested (and of course, by the test above, this
+    code is not obeyed when restarting after a partial match). */
+
+    if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0 &&
+        (options & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) == 0)
+      {
+      /* If the pattern was studied, a minimum subject length may be set. This
+      is a lower bound; no actual string of that length may actually match the
+      pattern. Although the value is, strictly, in characters, we treat it as
+      in pcre_uchar units to avoid spending too much time in this optimization.
+      */
+
+      if (study != NULL && (study->flags & PCRE_STUDY_MINLEN) != 0 &&
+          (pcre_uint32)(end_subject - current_subject) < study->minlength)
+        return PCRE_ERROR_NOMATCH;
+
+      /* If req_char is set, we know that that pcre_uchar must appear in the
+      subject for the match to succeed. If the first pcre_uchar is set,
+      req_char must be later in the subject; otherwise the test starts at the
+      match point. This optimization can save a huge amount of work in patterns
+      with nested unlimited repeats that aren't going to match. Writing
+      separate code for cased/caseless versions makes it go faster, as does
+      using an autoincrement and backing off on a match.
+
+      HOWEVER: when the subject string is very, very long, searching to its end
+      can take a long time, and give bad performance on quite ordinary
+      patterns. This showed up when somebody was matching /^C/ on a 32-megabyte
+      string... so we don't do this when the string is sufficiently long. */
+
+      if (has_req_char && end_subject - current_subject < REQ_BYTE_MAX)
+        {
+        register PCRE_PUCHAR p = current_subject + (has_first_char? 1:0);
+
+        /* We don't need to repeat the search if we haven't yet reached the
+        place we found it at last time. */
+
+        if (p > req_char_ptr)
+          {
+          if (req_char != req_char2)
+            {
+            while (p < end_subject)
+              {
+              register pcre_uint32 pp = UCHAR21INCTEST(p);
+              if (pp == req_char || pp == req_char2) { p--; break; }
+              }
+            }
+          else
+            {
+            while (p < end_subject)
+              {
+              if (UCHAR21INCTEST(p) == req_char) { p--; break; }
+              }
+            }
+
+          /* If we can't find the required pcre_uchar, break the matching loop,
+          which will cause a return or PCRE_ERROR_NOMATCH. */
+
+          if (p >= end_subject) break;
+
+          /* If we have found the required pcre_uchar, save the point where we
+          found it, so that we don't search again next time round the loop if
+          the start hasn't passed this point yet. */
+
+          req_char_ptr = p;
+          }
+        }
+      }
+    }   /* End of optimizations that are done when not restarting */
+
+  /* OK, now we can do the business */
+
+  md->start_used_ptr = current_subject;
+  md->recursive = NULL;
+
+  rc = internal_dfa_exec(
+    md,                                /* fixed match data */
+    md->start_code,                    /* this subexpression's code */
+    current_subject,                   /* where we currently are */
+    start_offset,                      /* start offset in subject */
+    offsets,                           /* offset vector */
+    offsetcount,                       /* size of same */
+    workspace,                         /* workspace vector */
+    wscount,                           /* size of same */
+    0);                                /* function recurse level */
+
+  /* Anything other than "no match" means we are done, always; otherwise, carry
+  on only if not anchored. */
+
+  if (rc != PCRE_ERROR_NOMATCH || anchored)
+    {
+    if (rc == PCRE_ERROR_PARTIAL && offsetcount >= 2)
+      {
+      offsets[0] = (int)(md->start_used_ptr - (PCRE_PUCHAR)subject);
+      offsets[1] = (int)(end_subject - (PCRE_PUCHAR)subject);
+      if (offsetcount > 2)
+        offsets[2] = (int)(current_subject - (PCRE_PUCHAR)subject);
+      }
+    return rc;
+    }
+
+  /* Advance to the next subject character unless we are at the end of a line
+  and firstline is set. */
+
+  if (firstline && IS_NEWLINE(current_subject)) break;
+  current_subject++;
+#ifdef SUPPORT_UTF
+  if (utf)
+    {
+    ACROSSCHAR(current_subject < end_subject, *current_subject,
+      current_subject++);
+    }
+#endif
+  if (current_subject > end_subject) break;
+
+  /* If we have just passed a CR and we are now at a LF, and the pattern does
+  not contain any explicit matches for \r or \n, and the newline option is CRLF
+  or ANY or ANYCRLF, advance the match position by one more character. */
+
+  if (UCHAR21TEST(current_subject - 1) == CHAR_CR &&
+      current_subject < end_subject &&
+      UCHAR21TEST(current_subject) == CHAR_NL &&
+      (re->flags & PCRE_HASCRORLF) == 0 &&
+        (md->nltype == NLTYPE_ANY ||
+         md->nltype == NLTYPE_ANYCRLF ||
+         md->nllen == 2))
+    current_subject++;
+
+  }   /* "Bumpalong" loop */
+
+return PCRE_ERROR_NOMATCH;
+}
+
+/* End of pcre_dfa_exec.c */