rugged 0.28.4.1 → 1.0.1

data/vendor/libgit2/deps/regex/regex.c

@@ -1,92 +0,0 @@
-/* Extended regular expression matching and search library.
-   Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Isamu Hasegawa <isamu@yamato.ibm.com>.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-   02110-1301 USA.  */
-
-#include "config.h"
-
-/* Make sure noone compiles this code with a C++ compiler.  */
-#ifdef __cplusplus
-# error "This is C code, use a C compiler"
-#endif
-
-#ifdef _LIBC
-/* We have to keep the namespace clean.  */
-# define regfree(preg) __regfree (preg)
-# define regexec(pr, st, nm, pm, ef) __regexec (pr, st, nm, pm, ef)
-# define regcomp(preg, pattern, cflags) __regcomp (preg, pattern, cflags)
-# define regerror(errcode, preg, errbuf, errbuf_size) \
-	__regerror(errcode, preg, errbuf, errbuf_size)
-# define re_set_registers(bu, re, nu, st, en) \
-	__re_set_registers (bu, re, nu, st, en)
-# define re_match_2(bufp, string1, size1, string2, size2, pos, regs, stop) \
-	__re_match_2 (bufp, string1, size1, string2, size2, pos, regs, stop)
-# define re_match(bufp, string, size, pos, regs) \
-	__re_match (bufp, string, size, pos, regs)
-# define re_search(bufp, string, size, startpos, range, regs) \
-	__re_search (bufp, string, size, startpos, range, regs)
-# define re_compile_pattern(pattern, length, bufp) \
-	__re_compile_pattern (pattern, length, bufp)
-# define re_set_syntax(syntax) __re_set_syntax (syntax)
-# define re_search_2(bufp, st1, s1, st2, s2, startpos, range, regs, stop) \
-	__re_search_2 (bufp, st1, s1, st2, s2, startpos, range, regs, stop)
-# define re_compile_fastmap(bufp) __re_compile_fastmap (bufp)
-
-# include "../locale/localeinfo.h"
-#endif
-
-#if defined (_MSC_VER)
-#include <stdio.h> /* for size_t */
-#endif
-
-/* On some systems, limits.h sets RE_DUP_MAX to a lower value than
-   GNU regex allows.  Include it before <regex.h>, which correctly
-   #undefs RE_DUP_MAX and sets it to the right value.  */
-#include <limits.h>
-
-#ifdef GAWK
-#undef alloca
-#define alloca alloca_is_bad_you_should_never_use_it
-#endif
-#include <regex.h>
-#include "regex_internal.h"
-
-#include "regex_internal.c"
-
-#ifdef GAWK
-# define bool int
-
-# ifndef true
-#  define true (1)
-# endif
-
-# ifndef false
-#  define false (0)
-# endif
-#endif
-#include "regcomp.c"
-#include "regexec.c"
-
-/* Binary backward compatibility.  */
-#if _LIBC
-# include <shlib-compat.h>
-# if SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3)
-link_warning (re_max_failures, "the 're_max_failures' variable is obsolete and will go away.")
-int re_max_failures = 2000;
-# endif
-#endif

data/vendor/libgit2/deps/regex/regex.h

@@ -1,582 +0,0 @@
-#include <stdio.h>
-#include <stddef.h>
-
-/* Definitions for data structures and routines for the regular
-   expression library.
-   Copyright (C) 1985,1989-93,1995-98,2000,2001,2002,2003,2005,2006,2008
-   Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-   02110-1301 USA.  */
-
-#ifndef _REGEX_H
-#define _REGEX_H 1
-
-#ifdef HAVE_STDDEF_H
-#include <stddef.h>
-#endif
-
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-
-#ifndef _LIBC
-#define __USE_GNU	1
-#endif
-
-/* Allow the use in C++ code.  */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* The following two types have to be signed and unsigned integer type
-   wide enough to hold a value of a pointer.  For most ANSI compilers
-   ptrdiff_t and size_t should be likely OK.  Still size of these two
-   types is 2 for Microsoft C.  Ugh... */
-typedef long int s_reg_t;
-typedef unsigned long int active_reg_t;
-
-/* The following bits are used to determine the regexp syntax we
-   recognize.  The set/not-set meanings are chosen so that Emacs syntax
-   remains the value 0.  The bits are given in alphabetical order, and
-   the definitions shifted by one from the previous bit; thus, when we
-   add or remove a bit, only one other definition need change.  */
-typedef unsigned long int reg_syntax_t;
-
-#ifdef __USE_GNU
-/* If this bit is not set, then \ inside a bracket expression is literal.
-   If set, then such a \ quotes the following character.  */
-# define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
-
-/* If this bit is not set, then + and ? are operators, and \+ and \? are
-     literals.
-   If set, then \+ and \? are operators and + and ? are literals.  */
-# define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
-
-/* If this bit is set, then character classes are supported.  They are:
-     [:alpha:], [:upper:], [:lower:],  [:digit:], [:alnum:], [:xdigit:],
-     [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
-   If not set, then character classes are not supported.  */
-# define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
-
-/* If this bit is set, then ^ and $ are always anchors (outside bracket
-     expressions, of course).
-   If this bit is not set, then it depends:
-        ^  is an anchor if it is at the beginning of a regular
-           expression or after an open-group or an alternation operator;
-        $  is an anchor if it is at the end of a regular expression, or
-           before a close-group or an alternation operator.
-
-   This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
-   POSIX draft 11.2 says that * etc. in leading positions is undefined.
-   We already implemented a previous draft which made those constructs
-   invalid, though, so we haven't changed the code back.  */
-# define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
-
-/* If this bit is set, then special characters are always special
-     regardless of where they are in the pattern.
-   If this bit is not set, then special characters are special only in
-     some contexts; otherwise they are ordinary.  Specifically,
-     * + ? and intervals are only special when not after the beginning,
-     open-group, or alternation operator.  */
-# define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
-
-/* If this bit is set, then *, +, ?, and { cannot be first in an re or
-     immediately after an alternation or begin-group operator.  */
-# define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
-
-/* If this bit is set, then . matches newline.
-   If not set, then it doesn't.  */
-# define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
-
-/* If this bit is set, then . doesn't match NUL.
-   If not set, then it does.  */
-# define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
-
-/* If this bit is set, nonmatching lists [^...] do not match newline.
-   If not set, they do.  */
-# define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
-
-/* If this bit is set, either \{...\} or {...} defines an
-     interval, depending on RE_NO_BK_BRACES.
-   If not set, \{, \}, {, and } are literals.  */
-# define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
-
-/* If this bit is set, +, ? and | aren't recognized as operators.
-   If not set, they are.  */
-# define RE_LIMITED_OPS (RE_INTERVALS << 1)
-
-/* If this bit is set, newline is an alternation operator.
-   If not set, newline is literal.  */
-# define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
-
-/* If this bit is set, then `{...}' defines an interval, and \{ and \}
-     are literals.
-  If not set, then `\{...\}' defines an interval.  */
-# define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
-
-/* If this bit is set, (...) defines a group, and \( and \) are literals.
-   If not set, \(...\) defines a group, and ( and ) are literals.  */
-# define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
-
-/* If this bit is set, then \<digit> matches <digit>.
-   If not set, then \<digit> is a back-reference.  */
-# define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
-
-/* If this bit is set, then | is an alternation operator, and \| is literal.
-   If not set, then \| is an alternation operator, and | is literal.  */
-# define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
-
-/* If this bit is set, then an ending range point collating higher
-     than the starting range point, as in [z-a], is invalid.
-   If not set, then when ending range point collates higher than the
-     starting range point, the range is ignored.  */
-# define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
-
-/* If this bit is set, then an unmatched ) is ordinary.
-   If not set, then an unmatched ) is invalid.  */
-# define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
-
-/* If this bit is set, succeed as soon as we match the whole pattern,
-   without further backtracking.  */
-# define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
-
-/* If this bit is set, do not process the GNU regex operators.
-   If not set, then the GNU regex operators are recognized. */
-# define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
-
-/* If this bit is set, a syntactically invalid interval is treated as
-   a string of ordinary characters.  For example, the ERE 'a{1' is
-   treated as 'a\{1'.  */
-# define RE_INVALID_INTERVAL_ORD (RE_NO_GNU_OPS << 1)
-
-/* If this bit is set, then ignore case when matching.
-   If not set, then case is significant.  */
-# define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1)
-
-/* This bit is used internally like RE_CONTEXT_INDEP_ANCHORS but only
-   for ^, because it is difficult to scan the regex backwards to find
-   whether ^ should be special.  */
-# define RE_CARET_ANCHORS_HERE (RE_ICASE << 1)
-
-/* If this bit is set, then \{ cannot be first in an bre or
-   immediately after an alternation or begin-group operator.  */
-# define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1)
-
-/* If this bit is set, then no_sub will be set to 1 during
-   re_compile_pattern.  */
-#define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1)
-#endif
-
-/* This global variable defines the particular regexp syntax to use (for
-   some interfaces).  When a regexp is compiled, the syntax used is
-   stored in the pattern buffer, so changing this does not affect
-   already-compiled regexps.  */
-extern reg_syntax_t re_syntax_options;
-
-#ifdef __USE_GNU
-/* Define combinations of the above bits for the standard possibilities.
-   (The [[[ comments delimit what gets put into the Texinfo file, so
-   don't delete them!)  */
-/* [[[begin syntaxes]]] */
-#define RE_SYNTAX_EMACS 0
-
-#define RE_SYNTAX_AWK							\
-  (RE_BACKSLASH_ESCAPE_IN_LISTS   | RE_DOT_NOT_NULL			\
-   | RE_NO_BK_PARENS              | RE_NO_BK_REFS			\
-   | RE_NO_BK_VBAR                | RE_NO_EMPTY_RANGES			\
-   | RE_DOT_NEWLINE		  | RE_CONTEXT_INDEP_ANCHORS		\
-   | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
-
-#define RE_SYNTAX_GNU_AWK						\
-  ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS		\
-   | RE_INVALID_INTERVAL_ORD)						\
-   & ~(RE_DOT_NOT_NULL | RE_CONTEXT_INDEP_OPS				\
-       | RE_CONTEXT_INVALID_OPS ))
-
-#define RE_SYNTAX_POSIX_AWK						\
-  (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS		\
-   | RE_INTERVALS	    | RE_NO_GNU_OPS				\
-   | RE_INVALID_INTERVAL_ORD)
-
-#define RE_SYNTAX_GREP							\
-  (RE_BK_PLUS_QM              | RE_CHAR_CLASSES				\
-   | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS				\
-   | RE_NEWLINE_ALT)
-
-#define RE_SYNTAX_EGREP							\
-  (RE_CHAR_CLASSES        | RE_CONTEXT_INDEP_ANCHORS			\
-   | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE			\
-   | RE_NEWLINE_ALT       | RE_NO_BK_PARENS				\
-   | RE_NO_BK_VBAR)
-
-#define RE_SYNTAX_POSIX_EGREP						\
-  (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES			\
-   | RE_INVALID_INTERVAL_ORD)
-
-/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff.  */
-#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
-
-#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
-
-/* Syntax bits common to both basic and extended POSIX regex syntax.  */
-#define _RE_SYNTAX_POSIX_COMMON						\
-  (RE_CHAR_CLASSES | RE_DOT_NEWLINE      | RE_DOT_NOT_NULL		\
-   | RE_INTERVALS  | RE_NO_EMPTY_RANGES)
-
-#define RE_SYNTAX_POSIX_BASIC						\
-  (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM | RE_CONTEXT_INVALID_DUP)
-
-/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
-   RE_LIMITED_OPS, i.e., \? \+ \| are not recognized.  Actually, this
-   isn't minimal, since other operators, such as \`, aren't disabled.  */
-#define RE_SYNTAX_POSIX_MINIMAL_BASIC					\
-  (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
-
-#define RE_SYNTAX_POSIX_EXTENDED					\
-  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS			\
-   | RE_CONTEXT_INDEP_OPS   | RE_NO_BK_BRACES				\
-   | RE_NO_BK_PARENS        | RE_NO_BK_VBAR				\
-   | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)
-
-/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
-   removed and RE_NO_BK_REFS is added.  */
-#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED				\
-  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS			\
-   | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES				\
-   | RE_NO_BK_PARENS        | RE_NO_BK_REFS				\
-   | RE_NO_BK_VBAR	    | RE_UNMATCHED_RIGHT_PAREN_ORD)
-/* [[[end syntaxes]]] */
-
-/* Maximum number of duplicates an interval can allow.  Some systems
-   (erroneously) define this in other header files, but we want our
-   value, so remove any previous define.  */
-# ifdef RE_DUP_MAX
-#  undef RE_DUP_MAX
-# endif
-/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows.  */
-# define RE_DUP_MAX (0x7fff)
-#endif
-
-
-/* POSIX `cflags' bits (i.e., information for `regcomp').  */
-
-/* If this bit is set, then use extended regular expression syntax.
-   If not set, then use basic regular expression syntax.  */
-#define REG_EXTENDED 1
-
-/* If this bit is set, then ignore case when matching.
-   If not set, then case is significant.  */
-#define REG_ICASE (REG_EXTENDED << 1)
-
-/* If this bit is set, then anchors do not match at newline
-     characters in the string.
-   If not set, then anchors do match at newlines.  */
-#define REG_NEWLINE (REG_ICASE << 1)
-
-/* If this bit is set, then report only success or fail in regexec.
-   If not set, then returns differ between not matching and errors.  */
-#define REG_NOSUB (REG_NEWLINE << 1)
-
-
-/* POSIX `eflags' bits (i.e., information for regexec).  */
-
-/* If this bit is set, then the beginning-of-line operator doesn't match
-     the beginning of the string (presumably because it's not the
-     beginning of a line).
-   If not set, then the beginning-of-line operator does match the
-     beginning of the string.  */
-#define REG_NOTBOL 1
-
-/* Like REG_NOTBOL, except for the end-of-line.  */
-#define REG_NOTEOL (1 << 1)
-
-/* Use PMATCH[0] to delimit the start and end of the search in the
-   buffer.  */
-#define REG_STARTEND (1 << 2)
-
-
-/* If any error codes are removed, changed, or added, update the
-   `re_error_msg' table in regex.c.  */
-typedef enum
-{
-#if defined _XOPEN_SOURCE || defined __USE_XOPEN2K
-  REG_ENOSYS = -1,	/* This will never happen for this implementation.  */
-#endif
-
-  REG_NOERROR = 0,	/* Success.  */
-  REG_NOMATCH,		/* Didn't find a match (for regexec).  */
-
-  /* POSIX regcomp return error codes.  (In the order listed in the
-     standard.)  */
-  REG_BADPAT,		/* Invalid pattern.  */
-  REG_ECOLLATE,		/* Inalid collating element.  */
-  REG_ECTYPE,		/* Invalid character class name.  */
-  REG_EESCAPE,		/* Trailing backslash.  */
-  REG_ESUBREG,		/* Invalid back reference.  */
-  REG_EBRACK,		/* Unmatched left bracket.  */
-  REG_EPAREN,		/* Parenthesis imbalance.  */
-  REG_EBRACE,		/* Unmatched \{.  */
-  REG_BADBR,		/* Invalid contents of \{\}.  */
-  REG_ERANGE,		/* Invalid range end.  */
-  REG_ESPACE,		/* Ran out of memory.  */
-  REG_BADRPT,		/* No preceding re for repetition op.  */
-
-  /* Error codes we've added.  */
-  REG_EEND,		/* Premature end.  */
-  REG_ESIZE,		/* Compiled pattern bigger than 2^16 bytes.  */
-  REG_ERPAREN		/* Unmatched ) or \); not returned from regcomp.  */
-} reg_errcode_t;
-
-/* This data structure represents a compiled pattern.  Before calling
-   the pattern compiler, the fields `buffer', `allocated', `fastmap',
-   `translate', and `no_sub' can be set.  After the pattern has been
-   compiled, the `re_nsub' field is available.  All other fields are
-   private to the regex routines.  */
-
-#ifndef RE_TRANSLATE_TYPE
-# define __RE_TRANSLATE_TYPE unsigned char *
-# ifdef __USE_GNU
-#  define RE_TRANSLATE_TYPE __RE_TRANSLATE_TYPE
-# endif
-#endif
-
-#ifdef __USE_GNU
-# define __REPB_PREFIX(name) name
-#else
-# define __REPB_PREFIX(name) __##name
-#endif
-
-struct re_pattern_buffer
-{
-  /* Space that holds the compiled pattern.  It is declared as
-     `unsigned char *' because its elements are sometimes used as
-     array indexes.  */
-  unsigned char *__REPB_PREFIX(buffer);
-
-  /* Number of bytes to which `buffer' points.  */
-  unsigned long int __REPB_PREFIX(allocated);
-
-  /* Number of bytes actually used in `buffer'.  */
-  unsigned long int __REPB_PREFIX(used);
-
-  /* Syntax setting with which the pattern was compiled.  */
-  reg_syntax_t __REPB_PREFIX(syntax);
-
-  /* Pointer to a fastmap, if any, otherwise zero.  re_search uses the
-     fastmap, if there is one, to skip over impossible starting points
-     for matches.  */
-  char *__REPB_PREFIX(fastmap);
-
-  /* Either a translate table to apply to all characters before
-     comparing them, or zero for no translation.  The translation is
-     applied to a pattern when it is compiled and to a string when it
-     is matched.  */
-  __RE_TRANSLATE_TYPE __REPB_PREFIX(translate);
-
-  /* Number of subexpressions found by the compiler.  */
-  size_t re_nsub;
-
-  /* Zero if this pattern cannot match the empty string, one else.
-     Well, in truth it's used only in `re_search_2', to see whether or
-     not we should use the fastmap, so we don't set this absolutely
-     perfectly; see `re_compile_fastmap' (the `duplicate' case).  */
-  unsigned __REPB_PREFIX(can_be_null) : 1;
-
-  /* If REGS_UNALLOCATED, allocate space in the `regs' structure
-     for `max (RE_NREGS, re_nsub + 1)' groups.
-     If REGS_REALLOCATE, reallocate space if necessary.
-     If REGS_FIXED, use what's there.  */
-#ifdef __USE_GNU
-# define REGS_UNALLOCATED 0
-# define REGS_REALLOCATE 1
-# define REGS_FIXED 2
-#endif
-  unsigned __REPB_PREFIX(regs_allocated) : 2;
-
-  /* Set to zero when `regex_compile' compiles a pattern; set to one
-     by `re_compile_fastmap' if it updates the fastmap.  */
-  unsigned __REPB_PREFIX(fastmap_accurate) : 1;
-
-  /* If set, `re_match_2' does not return information about
-     subexpressions.  */
-  unsigned __REPB_PREFIX(no_sub) : 1;
-
-  /* If set, a beginning-of-line anchor doesn't match at the beginning
-     of the string.  */
-  unsigned __REPB_PREFIX(not_bol) : 1;
-
-  /* Similarly for an end-of-line anchor.  */
-  unsigned __REPB_PREFIX(not_eol) : 1;
-
-  /* If true, an anchor at a newline matches.  */
-  unsigned __REPB_PREFIX(newline_anchor) : 1;
-};
-
-typedef struct re_pattern_buffer regex_t;
-
-/* Type for byte offsets within the string.  POSIX mandates this.  */
-typedef int regoff_t;
-
-
-#ifdef __USE_GNU
-/* This is the structure we store register match data in.  See
-   regex.texinfo for a full description of what registers match.  */
-struct re_registers
-{
-  unsigned num_regs;
-  regoff_t *start;
-  regoff_t *end;
-};
-
-
-/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
-   `re_match_2' returns information about at least this many registers
-   the first time a `regs' structure is passed.  */
-# ifndef RE_NREGS
-#  define RE_NREGS 30
-# endif
-#endif
-
-
-/* POSIX specification for registers.  Aside from the different names than
-   `re_registers', POSIX uses an array of structures, instead of a
-   structure of arrays.  */
-typedef struct
-{
-  regoff_t rm_so;  /* Byte offset from string's start to substring's start.  */
-  regoff_t rm_eo;  /* Byte offset from string's start to substring's end.  */
-} regmatch_t;
-
-/* Declarations for routines.  */
-
-#ifdef __USE_GNU
-/* Sets the current default syntax to SYNTAX, and return the old syntax.
-   You can also simply assign to the `re_syntax_options' variable.  */
-extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax);
-
-/* Compile the regular expression PATTERN, with length LENGTH
-   and syntax given by the global `re_syntax_options', into the buffer
-   BUFFER.  Return NULL if successful, and an error string if not.  */
-extern const char *re_compile_pattern (const char *__pattern, size_t __length,
-				       struct re_pattern_buffer *__buffer);
-
-
-/* Compile a fastmap for the compiled pattern in BUFFER; used to
-   accelerate searches.  Return 0 if successful and -2 if was an
-   internal error.  */
-extern int re_compile_fastmap (struct re_pattern_buffer *__buffer);
-
-
-/* Search in the string STRING (with length LENGTH) for the pattern
-   compiled into BUFFER.  Start searching at position START, for RANGE
-   characters.  Return the starting position of the match, -1 for no
-   match, or -2 for an internal error.  Also return register
-   information in REGS (if REGS and BUFFER->no_sub are nonzero).  */
-extern int re_search (struct re_pattern_buffer *__buffer, const char *__cstring,
-		      int __length, int __start, int __range,
-		      struct re_registers *__regs);
-
-
-/* Like `re_search', but search in the concatenation of STRING1 and
-   STRING2.  Also, stop searching at index START + STOP.  */
-extern int re_search_2 (struct re_pattern_buffer *__buffer,
-			const char *__string1, int __length1,
-			const char *__string2, int __length2, int __start,
-			int __range, struct re_registers *__regs, int __stop);
-
-
-/* Like `re_search', but return how many characters in STRING the regexp
-   in BUFFER matched, starting at position START.  */
-extern int re_match (struct re_pattern_buffer *__buffer, const char *__cstring,
-		     int __length, int __start, struct re_registers *__regs);
-
-
-/* Relates to `re_match' as `re_search_2' relates to `re_search'.  */
-extern int re_match_2 (struct re_pattern_buffer *__buffer,
-		       const char *__string1, int __length1,
-		       const char *__string2, int __length2, int __start,
-		       struct re_registers *__regs, int __stop);
-
-
-/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
-   ENDS.  Subsequent matches using BUFFER and REGS will use this memory
-   for recording register information.  STARTS and ENDS must be
-   allocated with malloc, and must each be at least `NUM_REGS * sizeof
-   (regoff_t)' bytes long.
-
-   If NUM_REGS == 0, then subsequent matches should allocate their own
-   register data.
-
-   Unless this function is called, the first search or match using
-   PATTERN_BUFFER will allocate its own register data, without
-   freeing the old data.  */
-extern void re_set_registers (struct re_pattern_buffer *__buffer,
-			      struct re_registers *__regs,
-			      unsigned int __num_regs,
-			      regoff_t *__starts, regoff_t *__ends);
-#endif	/* Use GNU */
-
-#if defined _REGEX_RE_COMP || (defined _LIBC && defined __USE_BSD)
-# ifndef _CRAY
-/* 4.2 bsd compatibility.  */
-extern char *re_comp (const char *);
-extern int re_exec (const char *);
-# endif
-#endif
-
-/* GCC 2.95 and later have "__restrict"; C99 compilers have
-   "restrict", and "configure" may have defined "restrict".  */
-#ifndef __restrict
-# if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__))
-#  if defined restrict || 199901L <= __STDC_VERSION__
-#   define __restrict restrict
-#  else
-#   define __restrict
-#  endif
-# endif
-#endif
-/* gcc 3.1 and up support the [restrict] syntax.  */
-#ifndef __restrict_arr
-# if (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)) \
-     && !defined __GNUG__
-#  define __restrict_arr __restrict
-# else
-#  define __restrict_arr
-# endif
-#endif
-
-/* POSIX compatibility.  */
-extern int regcomp (regex_t *__restrict __preg,
-		    const char *__restrict __pattern,
-		    int __cflags);
-
-extern int regexec (const regex_t *__restrict __preg,
-		    const char *__restrict __cstring, size_t __nmatch,
-		    regmatch_t __pmatch[__restrict_arr],
-		    int __eflags);
-
-extern size_t regerror (int __errcode, const regex_t *__restrict __preg,
-			char *__restrict __errbuf, size_t __errbuf_size);
-
-extern void regfree (regex_t *__preg);
-
-
-#ifdef __cplusplus
-}
-#endif	/* C++ */
-
-#endif /* regex.h */