rugged 0.27.7 → 0.27.10

data/vendor/libgit2/deps/pcre/pcre_internal.h

@@ -0,0 +1,2787 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+                       Written by Philip Hazel
+           Copyright (c) 1997-2016 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of the University of Cambridge nor the names of its
+      contributors may be used to endorse or promote products derived from
+      this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+/* This header contains definitions that are shared between the different
+modules, but which are not relevant to the exported API. This includes some
+functions whose names all begin with "_pcre_", "_pcre16_" or "_pcre32_"
+depending on the PRIV macro. */
+
+#ifndef PCRE_INTERNAL_H
+#define PCRE_INTERNAL_H
+
+/* Define PCRE_DEBUG to get debugging output on stdout. */
+
+#if 0
+#define PCRE_DEBUG
+#endif
+
+/* PCRE is compiled as an 8 bit library if it is not requested otherwise. */
+
+#if !defined COMPILE_PCRE16 && !defined COMPILE_PCRE32
+#define COMPILE_PCRE8
+#endif
+
+/* If SUPPORT_UCP is defined, SUPPORT_UTF must also be defined. The
+"configure" script ensures this, but not everybody uses "configure". */
+
+#if defined SUPPORT_UCP && !(defined SUPPORT_UTF)
+#define SUPPORT_UTF 1
+#endif
+
+/* We define SUPPORT_UTF if SUPPORT_UTF8 is enabled for compatibility
+reasons with existing code. */
+
+#if defined SUPPORT_UTF8 && !(defined SUPPORT_UTF)
+#define SUPPORT_UTF 1
+#endif
+
+/* Fixme: SUPPORT_UTF8 should be eventually disappear from the code.
+Until then we define it if SUPPORT_UTF is defined. */
+
+#if defined SUPPORT_UTF && !(defined SUPPORT_UTF8)
+#define SUPPORT_UTF8 1
+#endif
+
+/* We do not support both EBCDIC and UTF-8/16/32 at the same time. The "configure"
+script prevents both being selected, but not everybody uses "configure". */
+
+#if defined EBCDIC && defined SUPPORT_UTF
+#error The use of both EBCDIC and SUPPORT_UTF is not supported.
+#endif
+
+/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef
+inline, and there are *still* stupid compilers about that don't like indented
+pre-processor statements, or at least there were when I first wrote this. After
+all, it had only been about 10 years then...
+
+It turns out that the Mac Debugging.h header also defines the macro DPRINTF, so
+be absolutely sure we get our version. */
+
+#undef DPRINTF
+#ifdef PCRE_DEBUG
+#define DPRINTF(p) printf p
+#else
+#define DPRINTF(p) /* Nothing */
+#endif
+
+
+/* Standard C headers plus the external interface definition. The only time
+setjmp and stdarg are used is when NO_RECURSE is set. */
+
+#include <ctype.h>
+#include <limits.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/* Valgrind (memcheck) support */
+
+#ifdef SUPPORT_VALGRIND
+#include <valgrind/memcheck.h>
+#endif
+
+/* When compiling a DLL for Windows, the exported symbols have to be declared
+using some MS magic. I found some useful information on this web page:
+http://msdn2.microsoft.com/en-us/library/y4h7bcy6(VS.80).aspx. According to the
+information there, using __declspec(dllexport) without "extern" we have a
+definition; with "extern" we have a declaration. The settings here override the
+setting in pcre.h (which is included below); it defines only PCRE_EXP_DECL,
+which is all that is needed for applications (they just import the symbols). We
+use:
+
+  PCRE_EXP_DECL       for declarations
+  PCRE_EXP_DEFN       for definitions of exported functions
+  PCRE_EXP_DATA_DEFN  for definitions of exported variables
+
+The reason for the two DEFN macros is that in non-Windows environments, one
+does not want to have "extern" before variable definitions because it leads to
+compiler warnings. So we distinguish between functions and variables. In
+Windows, the two should always be the same.
+
+The reason for wrapping this in #ifndef PCRE_EXP_DECL is so that pcretest,
+which is an application, but needs to import this file in order to "peek" at
+internals, can #include pcre.h first to get an application's-eye view.
+
+In principle, people compiling for non-Windows, non-Unix-like (i.e. uncommon,
+special-purpose environments) might want to stick other stuff in front of
+exported symbols. That's why, in the non-Windows case, we set PCRE_EXP_DEFN and
+PCRE_EXP_DATA_DEFN only if they are not already set. */
+
+#ifndef PCRE_EXP_DECL
+# define PCRE_EXP_DECL       extern
+# define PCRE_EXP_DEFN
+# define PCRE_EXP_DATA_DEFN
+#endif
+
+/* When compiling with the MSVC compiler, it is sometimes necessary to include
+a "calling convention" before exported function names. (This is secondhand
+information; I know nothing about MSVC myself). For example, something like
+
+  void __cdecl function(....)
+
+might be needed. In order so make this easy, all the exported functions have
+PCRE_CALL_CONVENTION just before their names. It is rarely needed; if not
+set, we ensure here that it has no effect. */
+
+#ifndef PCRE_CALL_CONVENTION
+#define PCRE_CALL_CONVENTION
+#endif
+
+/* We need to have types that specify unsigned 8, 16 and 32-bit integers. We
+cannot determine these outside the compilation (e.g. by running a program as
+part of "configure") because PCRE is often cross-compiled for use on other
+systems. Instead we make use of the maximum sizes that are available at
+preprocessor time in standard C environments. */
+
+typedef unsigned char pcre_uint8;
+
+#if USHRT_MAX == 65535
+typedef unsigned short pcre_uint16;
+typedef short pcre_int16;
+#define PCRE_UINT16_MAX USHRT_MAX
+#define PCRE_INT16_MAX SHRT_MAX
+#elif UINT_MAX == 65535
+typedef unsigned int pcre_uint16;
+typedef int pcre_int16;
+#define PCRE_UINT16_MAX UINT_MAX
+#define PCRE_INT16_MAX INT_MAX
+#else
+#error Cannot determine a type for 16-bit integers
+#endif
+
+#if UINT_MAX == 4294967295U
+typedef unsigned int pcre_uint32;
+typedef int pcre_int32;
+#define PCRE_UINT32_MAX UINT_MAX
+#define PCRE_INT32_MAX INT_MAX
+#elif ULONG_MAX == 4294967295UL
+typedef unsigned long int pcre_uint32;
+typedef long int pcre_int32;
+#define PCRE_UINT32_MAX ULONG_MAX
+#define PCRE_INT32_MAX LONG_MAX
+#else
+#error Cannot determine a type for 32-bit integers
+#endif
+
+/* When checking for integer overflow in pcre_compile(), we need to handle
+large integers. If a 64-bit integer type is available, we can use that.
+Otherwise we have to cast to double, which of course requires floating point
+arithmetic. Handle this by defining a macro for the appropriate type. If
+stdint.h is available, include it; it may define INT64_MAX. Systems that do not
+have stdint.h (e.g. Solaris) may have inttypes.h. The macro int64_t may be set
+by "configure". */
+
+#if defined HAVE_STDINT_H
+#include <stdint.h>
+#elif defined HAVE_INTTYPES_H
+#include <inttypes.h>
+#endif
+
+#if defined INT64_MAX || defined int64_t
+#define INT64_OR_DOUBLE int64_t
+#else
+#define INT64_OR_DOUBLE double
+#endif
+
+/* All character handling must be done as unsigned characters. Otherwise there
+are problems with top-bit-set characters and functions such as isspace().
+However, we leave the interface to the outside world as char * or short *,
+because that should make things easier for callers. This character type is
+called pcre_uchar.
+
+The IN_UCHARS macro multiply its argument with the byte size of the current
+pcre_uchar type. Useful for memcpy and such operations, whose require the
+byte size of their input/output buffers.
+
+The MAX_255 macro checks whether its pcre_uchar input is less than 256.
+
+The TABLE_GET macro is designed for accessing elements of tables whose contain
+exactly 256 items. When the character is able to contain more than 256
+items, some check is needed before accessing these tables.
+*/
+
+#if defined COMPILE_PCRE8
+
+typedef unsigned char pcre_uchar;
+#define IN_UCHARS(x) (x)
+#define MAX_255(c) 1
+#define TABLE_GET(c, table, default) ((table)[c])
+
+#elif defined COMPILE_PCRE16
+
+#if USHRT_MAX != 65535
+/* This is a warning message. Change PCRE_UCHAR16 to a 16 bit data type in
+pcre.h(.in) and disable (comment out) this message. */
+#error Warning: PCRE_UCHAR16 is not a 16 bit data type.
+#endif
+
+typedef pcre_uint16 pcre_uchar;
+#define UCHAR_SHIFT (1)
+#define IN_UCHARS(x) ((x) * 2)
+#define MAX_255(c) ((c) <= 255u)
+#define TABLE_GET(c, table, default) (MAX_255(c)? ((table)[c]):(default))
+
+#elif defined COMPILE_PCRE32
+
+typedef pcre_uint32 pcre_uchar;
+#define UCHAR_SHIFT (2)
+#define IN_UCHARS(x) ((x) * 4)
+#define MAX_255(c) ((c) <= 255u)
+#define TABLE_GET(c, table, default) (MAX_255(c)? ((table)[c]):(default))
+
+#else
+#error Unsupported compiling mode
+#endif /* COMPILE_PCRE[8|16|32] */
+
+/* This is an unsigned int value that no character can ever have. UTF-8
+characters only go up to 0x7fffffff (though Unicode doesn't go beyond
+0x0010ffff). */
+
+#define NOTACHAR 0xffffffff
+
+/* PCRE is able to support several different kinds of newline (CR, LF, CRLF,
+"any" and "anycrlf" at present). The following macros are used to package up
+testing for newlines. NLBLOCK, PSSTART, and PSEND are defined in the various
+modules to indicate in which datablock the parameters exist, and what the
+start/end of string field names are. */
+
+#define NLTYPE_FIXED    0     /* Newline is a fixed length string */
+#define NLTYPE_ANY      1     /* Newline is any Unicode line ending */
+#define NLTYPE_ANYCRLF  2     /* Newline is CR, LF, or CRLF */
+
+/* This macro checks for a newline at the given position */
+
+#define IS_NEWLINE(p) \
+  ((NLBLOCK->nltype != NLTYPE_FIXED)? \
+    ((p) < NLBLOCK->PSEND && \
+     PRIV(is_newline)((p), NLBLOCK->nltype, NLBLOCK->PSEND, \
+       &(NLBLOCK->nllen), utf)) \
+    : \
+    ((p) <= NLBLOCK->PSEND - NLBLOCK->nllen && \
+     UCHAR21TEST(p) == NLBLOCK->nl[0] && \
+     (NLBLOCK->nllen == 1 || UCHAR21TEST(p+1) == NLBLOCK->nl[1])       \
+    ) \
+  )
+
+/* This macro checks for a newline immediately preceding the given position */
+
+#define WAS_NEWLINE(p) \
+  ((NLBLOCK->nltype != NLTYPE_FIXED)? \
+    ((p) > NLBLOCK->PSSTART && \
+     PRIV(was_newline)((p), NLBLOCK->nltype, NLBLOCK->PSSTART, \
+       &(NLBLOCK->nllen), utf)) \
+    : \
+    ((p) >= NLBLOCK->PSSTART + NLBLOCK->nllen && \
+     UCHAR21TEST(p - NLBLOCK->nllen) == NLBLOCK->nl[0] &&              \
+     (NLBLOCK->nllen == 1 || UCHAR21TEST(p - NLBLOCK->nllen + 1) == NLBLOCK->nl[1]) \
+    ) \
+  )
+
+/* When PCRE is compiled as a C++ library, the subject pointer can be replaced
+with a custom type. This makes it possible, for example, to allow pcre_exec()
+to process subject strings that are discontinuous by using a smart pointer
+class. It must always be possible to inspect all of the subject string in
+pcre_exec() because of the way it backtracks. Two macros are required in the
+normal case, for sign-unspecified and unsigned char pointers. The former is
+used for the external interface and appears in pcre.h, which is why its name
+must begin with PCRE_. */
+
+#ifdef CUSTOM_SUBJECT_PTR
+#define PCRE_PUCHAR CUSTOM_SUBJECT_PTR
+#else
+#define PCRE_PUCHAR const pcre_uchar *
+#endif
+
+/* Include the public PCRE header and the definitions of UCP character property
+values. */
+
+#include "pcre.h"
+#include "ucp.h"
+
+#ifdef COMPILE_PCRE32
+/* Assert that the public PCRE_UCHAR32 is a 32-bit type */
+typedef int __assert_pcre_uchar32_size[sizeof(PCRE_UCHAR32) == 4 ? 1 : -1];
+#endif
+
+/* When compiling for use with the Virtual Pascal compiler, these functions
+need to have their names changed. PCRE must be compiled with the -DVPCOMPAT
+option on the command line. */
+
+#ifdef VPCOMPAT
+#define strlen(s)        _strlen(s)
+#define strncmp(s1,s2,m) _strncmp(s1,s2,m)
+#define memcmp(s,c,n)    _memcmp(s,c,n)
+#define memcpy(d,s,n)    _memcpy(d,s,n)
+#define memmove(d,s,n)   _memmove(d,s,n)
+#define memset(s,c,n)    _memset(s,c,n)
+#else  /* VPCOMPAT */
+
+/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(),
+define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY
+is set. Otherwise, include an emulating function for those systems that have
+neither (there some non-Unix environments where this is the case). */
+
+#ifndef HAVE_MEMMOVE
+#undef  memmove        /* some systems may have a macro */
+#ifdef HAVE_BCOPY
+#define memmove(a, b, c) bcopy(b, a, c)
+#else  /* HAVE_BCOPY */
+static void *
+pcre_memmove(void *d, const void *s, size_t n)
+{
+size_t i;
+unsigned char *dest = (unsigned char *)d;
+const unsigned char *src = (const unsigned char *)s;
+if (dest > src)
+  {
+  dest += n;
+  src += n;
+  for (i = 0; i < n; ++i) *(--dest) = *(--src);
+  return (void *)dest;
+  }
+else
+  {
+  for (i = 0; i < n; ++i) *dest++ = *src++;
+  return (void *)(dest - n);
+  }
+}
+#define memmove(a, b, c) pcre_memmove(a, b, c)
+#endif   /* not HAVE_BCOPY */
+#endif   /* not HAVE_MEMMOVE */
+#endif   /* not VPCOMPAT */
+
+
+/* PCRE keeps offsets in its compiled code as 2-byte quantities (always stored
+in big-endian order) by default. These are used, for example, to link from the
+start of a subpattern to its alternatives and its end. The use of 2 bytes per
+offset limits the size of the compiled regex to around 64K, which is big enough
+for almost everybody. However, I received a request for an even bigger limit.
+For this reason, and also to make the code easier to maintain, the storing and
+loading of offsets from the byte string is now handled by the macros that are
+defined here.
+
+The macros are controlled by the value of LINK_SIZE. This defaults to 2 in
+the config.h file, but can be overridden by using -D on the command line. This
+is automated on Unix systems via the "configure" command. */
+
+#if defined COMPILE_PCRE8
+
+#if LINK_SIZE == 2
+
+#define PUT(a,n,d)   \
+  (a[n] = (d) >> 8), \
+  (a[(n)+1] = (d) & 255)
+
+#define GET(a,n) \
+  (((a)[n] << 8) | (a)[(n)+1])
+
+#define MAX_PATTERN_SIZE (1 << 16)
+
+
+#elif LINK_SIZE == 3
+
+#define PUT(a,n,d)       \
+  (a[n] = (d) >> 16),    \
+  (a[(n)+1] = (d) >> 8), \
+  (a[(n)+2] = (d) & 255)
+
+#define GET(a,n) \
+  (((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2])
+
+#define MAX_PATTERN_SIZE (1 << 24)
+
+
+#elif LINK_SIZE == 4
+
+#define PUT(a,n,d)        \
+  (a[n] = (d) >> 24),     \
+  (a[(n)+1] = (d) >> 16), \
+  (a[(n)+2] = (d) >> 8),  \
+  (a[(n)+3] = (d) & 255)
+
+#define GET(a,n) \
+  (((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3])
+
+/* Keep it positive */
+#define MAX_PATTERN_SIZE (1 << 30)
+
+#else
+#error LINK_SIZE must be either 2, 3, or 4
+#endif
+
+#elif defined COMPILE_PCRE16
+
+#if LINK_SIZE == 2
+
+/* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */
+#undef LINK_SIZE
+#define LINK_SIZE 1
+
+#define PUT(a,n,d)   \
+  (a[n] = (d))
+
+#define GET(a,n) \
+  (a[n])
+
+#define MAX_PATTERN_SIZE (1 << 16)
+
+#elif LINK_SIZE == 3 || LINK_SIZE == 4
+
+/* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */
+#undef LINK_SIZE
+#define LINK_SIZE 2
+
+#define PUT(a,n,d)   \
+  (a[n] = (d) >> 16), \
+  (a[(n)+1] = (d) & 65535)
+
+#define GET(a,n) \
+  (((a)[n] << 16) | (a)[(n)+1])
+
+/* Keep it positive */
+#define MAX_PATTERN_SIZE (1 << 30)
+
+#else
+#error LINK_SIZE must be either 2, 3, or 4
+#endif
+
+#elif defined COMPILE_PCRE32
+
+/* Only supported LINK_SIZE is 4 */
+/* Redefine LINK_SIZE as a multiple of sizeof(pcre_uchar) */
+#undef LINK_SIZE
+#define LINK_SIZE 1
+
+#define PUT(a,n,d)   \
+  (a[n] = (d))
+
+#define GET(a,n) \
+  (a[n])
+
+/* Keep it positive */
+#define MAX_PATTERN_SIZE (1 << 30)
+
+#else
+#error Unsupported compiling mode
+#endif /* COMPILE_PCRE[8|16|32] */
+
+/* Convenience macro defined in terms of the others */
+
+#define PUTINC(a,n,d)   PUT(a,n,d), a += LINK_SIZE
+
+
+/* PCRE uses some other 2-byte quantities that do not change when the size of
+offsets changes. There are used for repeat counts and for other things such as
+capturing parenthesis numbers in back references. */
+
+#if defined COMPILE_PCRE8
+
+#define IMM2_SIZE 2
+
+#define PUT2(a,n,d)   \
+  a[n] = (d) >> 8; \
+  a[(n)+1] = (d) & 255
+
+/* For reasons that I do not understand, the expression in this GET2 macro is
+treated by gcc as a signed expression, even when a is declared as unsigned. It
+seems that any kind of arithmetic results in a signed value. */
+
+#define GET2(a,n) \
+  (unsigned int)(((a)[n] << 8) | (a)[(n)+1])
+
+#elif defined COMPILE_PCRE16
+
+#define IMM2_SIZE 1
+
+#define PUT2(a,n,d)   \
+   a[n] = d
+
+#define GET2(a,n) \
+   a[n]
+
+#elif defined COMPILE_PCRE32
+
+#define IMM2_SIZE 1
+
+#define PUT2(a,n,d)   \
+   a[n] = d
+
+#define GET2(a,n) \
+   a[n]
+
+#else
+#error Unsupported compiling mode
+#endif /* COMPILE_PCRE[8|16|32] */
+
+#define PUT2INC(a,n,d)  PUT2(a,n,d), a += IMM2_SIZE
+
+/* The maximum length of a MARK name is currently one data unit; it may be
+changed in future to be a fixed number of bytes or to depend on LINK_SIZE. */
+
+#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
+#define MAX_MARK ((1u << 16) - 1)
+#else
+#define MAX_MARK ((1u << 8) - 1)
+#endif
+
+/* There is a proposed future special "UTF-21" mode, in which only the lowest
+21 bits of a 32-bit character are interpreted as UTF, with the remaining 11
+high-order bits available to the application for other uses. In preparation for
+the future implementation of this mode, there are macros that load a data item
+and, if in this special mode, mask it to 21 bits. These macros all have names
+starting with UCHAR21. In all other modes, including the normal 32-bit
+library, the macros all have the same simple definitions. When the new mode is
+implemented, it is expected that these definitions will be varied appropriately
+using #ifdef when compiling the library that supports the special mode. */
+
+#define UCHAR21(eptr)        (*(eptr))
+#define UCHAR21TEST(eptr)    (*(eptr))
+#define UCHAR21INC(eptr)     (*(eptr)++)
+#define UCHAR21INCTEST(eptr) (*(eptr)++)
+
+/* When UTF encoding is being used, a character is no longer just a single
+byte in 8-bit mode or a single short in 16-bit mode. The macros for character
+handling generate simple sequences when used in the basic mode, and more
+complicated ones for UTF characters. GETCHARLENTEST and other macros are not
+used when UTF is not supported. To make sure they can never even appear when
+UTF support is omitted, we don't even define them. */
+
+#ifndef SUPPORT_UTF
+
+/* #define MAX_VALUE_FOR_SINGLE_CHAR */
+/* #define HAS_EXTRALEN(c) */
+/* #define GET_EXTRALEN(c) */
+/* #define NOT_FIRSTCHAR(c) */
+#define GETCHAR(c, eptr) c = *eptr;
+#define GETCHARTEST(c, eptr) c = *eptr;
+#define GETCHARINC(c, eptr) c = *eptr++;
+#define GETCHARINCTEST(c, eptr) c = *eptr++;
+#define GETCHARLEN(c, eptr, len) c = *eptr;
+/* #define GETCHARLENTEST(c, eptr, len) */
+/* #define BACKCHAR(eptr) */
+/* #define FORWARDCHAR(eptr) */
+/* #define ACROSSCHAR(condition, eptr, action) */
+
+#else   /* SUPPORT_UTF */
+
+/* Tests whether the code point needs extra characters to decode. */
+
+#define HASUTF8EXTRALEN(c) ((c) >= 0xc0)
+
+/* Base macro to pick up the remaining bytes of a UTF-8 character, not
+advancing the pointer. */
+
+#define GETUTF8(c, eptr) \
+    { \
+    if ((c & 0x20) == 0) \
+      c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \
+    else if ((c & 0x10) == 0) \
+      c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
+    else if ((c & 0x08) == 0) \
+      c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \
+      ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \
+    else if ((c & 0x04) == 0) \
+      c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \
+          ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \
+          (eptr[4] & 0x3f); \
+    else \
+      c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \
+          ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \
+          ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \
+    }
+
+/* Base macro to pick up the remaining bytes of a UTF-8 character, advancing
+the pointer. */
+
+#define GETUTF8INC(c, eptr) \
+    { \
+    if ((c & 0x20) == 0) \
+      c = ((c & 0x1f) << 6) | (*eptr++ & 0x3f); \
+    else if ((c & 0x10) == 0) \
+      { \
+      c = ((c & 0x0f) << 12) | ((*eptr & 0x3f) << 6) | (eptr[1] & 0x3f); \
+      eptr += 2; \
+      } \
+    else if ((c & 0x08) == 0) \
+      { \
+      c = ((c & 0x07) << 18) | ((*eptr & 0x3f) << 12) | \
+          ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
+      eptr += 3; \
+      } \
+    else if ((c & 0x04) == 0) \
+      { \
+      c = ((c & 0x03) << 24) | ((*eptr & 0x3f) << 18) | \
+          ((eptr[1] & 0x3f) << 12) | ((eptr[2] & 0x3f) << 6) | \
+          (eptr[3] & 0x3f); \
+      eptr += 4; \
+      } \
+    else \
+      { \
+      c = ((c & 0x01) << 30) | ((*eptr & 0x3f) << 24) | \
+          ((eptr[1] & 0x3f) << 18) | ((eptr[2] & 0x3f) << 12) | \
+          ((eptr[3] & 0x3f) << 6) | (eptr[4] & 0x3f); \
+      eptr += 5; \
+      } \
+    }
+
+#if defined COMPILE_PCRE8
+
+/* These macros were originally written in the form of loops that used data
+from the tables whose names start with PRIV(utf8_table). They were rewritten by
+a user so as not to use loops, because in some environments this gives a
+significant performance advantage, and it seems never to do any harm. */
+
+/* Tells the biggest code point which can be encoded as a single character. */
+
+#define MAX_VALUE_FOR_SINGLE_CHAR 127
+
+/* Tests whether the code point needs extra characters to decode. */
+
+#define HAS_EXTRALEN(c) ((c) >= 0xc0)
+
+/* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE.
+Otherwise it has an undefined behaviour. */
+
+#define GET_EXTRALEN(c) (PRIV(utf8_table4)[(c) & 0x3f])
+
+/* Returns TRUE, if the given character is not the first character
+of a UTF sequence. */
+
+#define NOT_FIRSTCHAR(c) (((c) & 0xc0) == 0x80)
+
+/* Get the next UTF-8 character, not advancing the pointer. This is called when
+we know we are in UTF-8 mode. */
+
+#define GETCHAR(c, eptr) \
+  c = *eptr; \
+  if (c >= 0xc0) GETUTF8(c, eptr);
+
+/* Get the next UTF-8 character, testing for UTF-8 mode, and not advancing the
+pointer. */
+
+#define GETCHARTEST(c, eptr) \
+  c = *eptr; \
+  if (utf && c >= 0xc0) GETUTF8(c, eptr);
+
+/* Get the next UTF-8 character, advancing the pointer. This is called when we
+know we are in UTF-8 mode. */
+
+#define GETCHARINC(c, eptr) \
+  c = *eptr++; \
+  if (c >= 0xc0) GETUTF8INC(c, eptr);
+
+/* Get the next character, testing for UTF-8 mode, and advancing the pointer.
+This is called when we don't know if we are in UTF-8 mode. */
+
+#define GETCHARINCTEST(c, eptr) \
+  c = *eptr++; \
+  if (utf && c >= 0xc0) GETUTF8INC(c, eptr);
+
+/* Base macro to pick up the remaining bytes of a UTF-8 character, not
+advancing the pointer, incrementing the length. */
+
+#define GETUTF8LEN(c, eptr, len) \
+    { \
+    if ((c & 0x20) == 0) \
+      { \
+      c = ((c & 0x1f) << 6) | (eptr[1] & 0x3f); \
+      len++; \
+      } \
+    else if ((c & 0x10)  == 0) \
+      { \
+      c = ((c & 0x0f) << 12) | ((eptr[1] & 0x3f) << 6) | (eptr[2] & 0x3f); \
+      len += 2; \
+      } \
+    else if ((c & 0x08)  == 0) \
+      {\
+      c = ((c & 0x07) << 18) | ((eptr[1] & 0x3f) << 12) | \
+          ((eptr[2] & 0x3f) << 6) | (eptr[3] & 0x3f); \
+      len += 3; \
+      } \
+    else if ((c & 0x04)  == 0) \
+      { \
+      c = ((c & 0x03) << 24) | ((eptr[1] & 0x3f) << 18) | \
+          ((eptr[2] & 0x3f) << 12) | ((eptr[3] & 0x3f) << 6) | \
+          (eptr[4] & 0x3f); \
+      len += 4; \
+      } \
+    else \
+      {\
+      c = ((c & 0x01) << 30) | ((eptr[1] & 0x3f) << 24) | \
+          ((eptr[2] & 0x3f) << 18) | ((eptr[3] & 0x3f) << 12) | \
+          ((eptr[4] & 0x3f) << 6) | (eptr[5] & 0x3f); \
+      len += 5; \
+      } \
+    }
+
+/* Get the next UTF-8 character, not advancing the pointer, incrementing length
+if there are extra bytes. This is called when we know we are in UTF-8 mode. */
+
+#define GETCHARLEN(c, eptr, len) \
+  c = *eptr; \
+  if (c >= 0xc0) GETUTF8LEN(c, eptr, len);
+
+/* Get the next UTF-8 character, testing for UTF-8 mode, not advancing the
+pointer, incrementing length if there are extra bytes. This is called when we
+do not know if we are in UTF-8 mode. */
+
+#define GETCHARLENTEST(c, eptr, len) \
+  c = *eptr; \
+  if (utf && c >= 0xc0) GETUTF8LEN(c, eptr, len);
+
+/* If the pointer is not at the start of a character, move it back until
+it is. This is called only in UTF-8 mode - we don't put a test within the macro
+because almost all calls are already within a block of UTF-8 only code. */
+
+#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--
+
+/* Same as above, just in the other direction. */
+#define FORWARDCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr++
+
+/* Same as above, but it allows a fully customizable form. */
+#define ACROSSCHAR(condition, eptr, action) \
+  while((condition) && ((eptr) & 0xc0) == 0x80) action
+
+#elif defined COMPILE_PCRE16
+
+/* Tells the biggest code point which can be encoded as a single character. */
+
+#define MAX_VALUE_FOR_SINGLE_CHAR 65535
+
+/* Tests whether the code point needs extra characters to decode. */
+
+#define HAS_EXTRALEN(c) (((c) & 0xfc00) == 0xd800)
+
+/* Returns with the additional number of characters if IS_MULTICHAR(c) is TRUE.
+Otherwise it has an undefined behaviour. */
+
+#define GET_EXTRALEN(c) 1
+
+/* Returns TRUE, if the given character is not the first character
+of a UTF sequence. */
+
+#define NOT_FIRSTCHAR(c) (((c) & 0xfc00) == 0xdc00)
+
+/* Base macro to pick up the low surrogate of a UTF-16 character, not
+advancing the pointer. */
+
+#define GETUTF16(c, eptr) \
+   { c = (((c & 0x3ff) << 10) | (eptr[1] & 0x3ff)) + 0x10000; }
+
+/* Get the next UTF-16 character, not advancing the pointer. This is called when
+we know we are in UTF-16 mode. */
+
+#define GETCHAR(c, eptr) \
+  c = *eptr; \
+  if ((c & 0xfc00) == 0xd800) GETUTF16(c, eptr);
+
+/* Get the next UTF-16 character, testing for UTF-16 mode, and not advancing the
+pointer. */
+
+#define GETCHARTEST(c, eptr) \
+  c = *eptr; \
+  if (utf && (c & 0xfc00) == 0xd800) GETUTF16(c, eptr);
+
+/* Base macro to pick up the low surrogate of a UTF-16 character, advancing
+the pointer. */
+
+#define GETUTF16INC(c, eptr) \
+   { c = (((c & 0x3ff) << 10) | (*eptr++ & 0x3ff)) + 0x10000; }
+
+/* Get the next UTF-16 character, advancing the pointer. This is called when we
+know we are in UTF-16 mode. */
+
+#define GETCHARINC(c, eptr) \
+  c = *eptr++; \
+  if ((c & 0xfc00) == 0xd800) GETUTF16INC(c, eptr);
+
+/* Get the next character, testing for UTF-16 mode, and advancing the pointer.
+This is called when we don't know if we are in UTF-16 mode. */
+
+#define GETCHARINCTEST(c, eptr) \
+  c = *eptr++; \
+  if (utf && (c & 0xfc00) == 0xd800) GETUTF16INC(c, eptr);
+
+/* Base macro to pick up the low surrogate of a UTF-16 character, not
+advancing the pointer, incrementing the length. */
+
+#define GETUTF16LEN(c, eptr, len) \
+   { c = (((c & 0x3ff) << 10) | (eptr[1] & 0x3ff)) + 0x10000; len++; }
+
+/* Get the next UTF-16 character, not advancing the pointer, incrementing
+length if there is a low surrogate. This is called when we know we are in
+UTF-16 mode. */
+
+#define GETCHARLEN(c, eptr, len) \
+  c = *eptr; \
+  if ((c & 0xfc00) == 0xd800) GETUTF16LEN(c, eptr, len);
+
+/* Get the next UTF-816character, testing for UTF-16 mode, not advancing the
+pointer, incrementing length if there is a low surrogate. This is called when
+we do not know if we are in UTF-16 mode. */
+
+#define GETCHARLENTEST(c, eptr, len) \
+  c = *eptr; \
+  if (utf && (c & 0xfc00) == 0xd800) GETUTF16LEN(c, eptr, len);
+
+/* If the pointer is not at the start of a character, move it back until
+it is. This is called only in UTF-16 mode - we don't put a test within the
+macro because almost all calls are already within a block of UTF-16 only
+code. */
+
+#define BACKCHAR(eptr) if ((*eptr & 0xfc00) == 0xdc00) eptr--
+
+/* Same as above, just in the other direction. */
+#define FORWARDCHAR(eptr) if ((*eptr & 0xfc00) == 0xdc00) eptr++
+
+/* Same as above, but it allows a fully customizable form. */
+#define ACROSSCHAR(condition, eptr, action) \
+  if ((condition) && ((eptr) & 0xfc00) == 0xdc00) action
+
+#elif defined COMPILE_PCRE32
+
+/* These are trivial for the 32-bit library, since all UTF-32 characters fit
+into one pcre_uchar unit. */
+#define MAX_VALUE_FOR_SINGLE_CHAR (0x10ffffu)
+#define HAS_EXTRALEN(c) (0)
+#define GET_EXTRALEN(c) (0)
+#define NOT_FIRSTCHAR(c) (0)
+
+/* Get the next UTF-32 character, not advancing the pointer. This is called when
+we know we are in UTF-32 mode. */
+
+#define GETCHAR(c, eptr) \
+  c = *(eptr);
+
+/* Get the next UTF-32 character, testing for UTF-32 mode, and not advancing the
+pointer. */
+
+#define GETCHARTEST(c, eptr) \
+  c = *(eptr);
+
+/* Get the next UTF-32 character, advancing the pointer. This is called when we
+know we are in UTF-32 mode. */
+
+#define GETCHARINC(c, eptr) \
+  c = *((eptr)++);
+
+/* Get the next character, testing for UTF-32 mode, and advancing the pointer.
+This is called when we don't know if we are in UTF-32 mode. */
+
+#define GETCHARINCTEST(c, eptr) \
+  c = *((eptr)++);
+
+/* Get the next UTF-32 character, not advancing the pointer, not incrementing
+length (since all UTF-32 is of length 1). This is called when we know we are in
+UTF-32 mode. */
+
+#define GETCHARLEN(c, eptr, len) \
+  GETCHAR(c, eptr)
+
+/* Get the next UTF-32character, testing for UTF-32 mode, not advancing the
+pointer, not incrementing the length (since all UTF-32 is of length 1).
+This is called when we do not know if we are in UTF-32 mode. */
+
+#define GETCHARLENTEST(c, eptr, len) \
+  GETCHARTEST(c, eptr)
+
+/* If the pointer is not at the start of a character, move it back until
+it is. This is called only in UTF-32 mode - we don't put a test within the
+macro because almost all calls are already within a block of UTF-32 only
+code.
+These are all no-ops since all UTF-32 characters fit into one pcre_uchar. */
+
+#define BACKCHAR(eptr) do { } while (0)
+
+/* Same as above, just in the other direction. */
+#define FORWARDCHAR(eptr) do { } while (0)
+
+/* Same as above, but it allows a fully customizable form. */
+#define ACROSSCHAR(condition, eptr, action) do { } while (0)
+
+#else
+#error Unsupported compiling mode
+#endif /* COMPILE_PCRE[8|16|32] */
+
+#endif  /* SUPPORT_UTF */
+
+/* Tests for Unicode horizontal and vertical whitespace characters must check a
+number of different values. Using a switch statement for this generates the
+fastest code (no loop, no memory access), and there are several places in the
+interpreter code where this happens. In order to ensure that all the case lists
+remain in step, we use macros so that there is only one place where the lists
+are defined.
+
+These values are also required as lists in pcre_compile.c when processing \h,
+\H, \v and \V in a character class. The lists are defined in pcre_tables.c, but
+macros that define the values are here so that all the definitions are
+together. The lists must be in ascending character order, terminated by
+NOTACHAR (which is 0xffffffff).
+
+Any changes should ensure that the various macros are kept in step with each
+other. NOTE: The values also appear in pcre_jit_compile.c. */
+
+/* ------ ASCII/Unicode environments ------ */
+
+#ifndef EBCDIC
+
+#define HSPACE_LIST \
+  CHAR_HT, CHAR_SPACE, CHAR_NBSP, \
+  0x1680, 0x180e, 0x2000, 0x2001, 0x2002, 0x2003, 0x2004, 0x2005, \
+  0x2006, 0x2007, 0x2008, 0x2009, 0x200A, 0x202f, 0x205f, 0x3000, \
+  NOTACHAR
+
+#define HSPACE_MULTIBYTE_CASES \
+  case 0x1680:  /* OGHAM SPACE MARK */ \
+  case 0x180e:  /* MONGOLIAN VOWEL SEPARATOR */ \
+  case 0x2000:  /* EN QUAD */ \
+  case 0x2001:  /* EM QUAD */ \
+  case 0x2002:  /* EN SPACE */ \
+  case 0x2003:  /* EM SPACE */ \
+  case 0x2004:  /* THREE-PER-EM SPACE */ \
+  case 0x2005:  /* FOUR-PER-EM SPACE */ \
+  case 0x2006:  /* SIX-PER-EM SPACE */ \
+  case 0x2007:  /* FIGURE SPACE */ \
+  case 0x2008:  /* PUNCTUATION SPACE */ \
+  case 0x2009:  /* THIN SPACE */ \
+  case 0x200A:  /* HAIR SPACE */ \
+  case 0x202f:  /* NARROW NO-BREAK SPACE */ \
+  case 0x205f:  /* MEDIUM MATHEMATICAL SPACE */ \
+  case 0x3000   /* IDEOGRAPHIC SPACE */
+
+#define HSPACE_BYTE_CASES \
+  case CHAR_HT: \
+  case CHAR_SPACE: \
+  case CHAR_NBSP
+
+#define HSPACE_CASES \
+  HSPACE_BYTE_CASES: \
+  HSPACE_MULTIBYTE_CASES
+
+#define VSPACE_LIST \
+  CHAR_LF, CHAR_VT, CHAR_FF, CHAR_CR, CHAR_NEL, 0x2028, 0x2029, NOTACHAR
+
+#define VSPACE_MULTIBYTE_CASES \
+  case 0x2028:    /* LINE SEPARATOR */ \
+  case 0x2029     /* PARAGRAPH SEPARATOR */
+
+#define VSPACE_BYTE_CASES \
+  case CHAR_LF: \
+  case CHAR_VT: \
+  case CHAR_FF: \
+  case CHAR_CR: \
+  case CHAR_NEL
+
+#define VSPACE_CASES \
+  VSPACE_BYTE_CASES: \
+  VSPACE_MULTIBYTE_CASES
+
+/* ------ EBCDIC environments ------ */
+
+#else
+#define HSPACE_LIST CHAR_HT, CHAR_SPACE, CHAR_NBSP, NOTACHAR
+
+#define HSPACE_BYTE_CASES \
+  case CHAR_HT: \
+  case CHAR_SPACE: \
+  case CHAR_NBSP
+
+#define HSPACE_CASES HSPACE_BYTE_CASES
+
+#ifdef EBCDIC_NL25
+#define VSPACE_LIST \
+  CHAR_VT, CHAR_FF, CHAR_CR, CHAR_NEL, CHAR_LF, NOTACHAR
+#else
+#define VSPACE_LIST \
+  CHAR_VT, CHAR_FF, CHAR_CR, CHAR_LF, CHAR_NEL, NOTACHAR
+#endif
+
+#define VSPACE_BYTE_CASES \
+  case CHAR_LF: \
+  case CHAR_VT: \
+  case CHAR_FF: \
+  case CHAR_CR: \
+  case CHAR_NEL
+
+#define VSPACE_CASES VSPACE_BYTE_CASES
+#endif  /* EBCDIC */
+
+/* ------ End of whitespace macros ------ */
+
+
+
+/* Private flags containing information about the compiled regex. They used to
+live at the top end of the options word, but that got almost full, so they were
+moved to a 16-bit flags word - which got almost full, so now they are in a
+32-bit flags word. From release 8.00, PCRE_NOPARTIAL is unused, as the
+restrictions on partial matching have been lifted. It remains for backwards
+compatibility. */
+
+#define PCRE_MODE8         0x00000001  /* compiled in 8 bit mode */
+#define PCRE_MODE16        0x00000002  /* compiled in 16 bit mode */
+#define PCRE_MODE32        0x00000004  /* compiled in 32 bit mode */
+#define PCRE_FIRSTSET      0x00000010  /* first_char is set */
+#define PCRE_FCH_CASELESS  0x00000020  /* caseless first char */
+#define PCRE_REQCHSET      0x00000040  /* req_byte is set */
+#define PCRE_RCH_CASELESS  0x00000080  /* caseless requested char */
+#define PCRE_STARTLINE     0x00000100  /* start after \n for multiline */
+#define PCRE_NOPARTIAL     0x00000200  /* can't use partial with this regex */
+#define PCRE_JCHANGED      0x00000400  /* j option used in regex */
+#define PCRE_HASCRORLF     0x00000800  /* explicit \r or \n in pattern */
+#define PCRE_HASTHEN       0x00001000  /* pattern contains (*THEN) */
+#define PCRE_MLSET         0x00002000  /* match limit set by regex */
+#define PCRE_RLSET         0x00004000  /* recursion limit set by regex */
+#define PCRE_MATCH_EMPTY   0x00008000  /* pattern can match empty string */
+
+#if defined COMPILE_PCRE8
+#define PCRE_MODE          PCRE_MODE8
+#elif defined COMPILE_PCRE16
+#define PCRE_MODE          PCRE_MODE16
+#elif defined COMPILE_PCRE32
+#define PCRE_MODE          PCRE_MODE32
+#endif
+#define PCRE_MODE_MASK     (PCRE_MODE8 | PCRE_MODE16 | PCRE_MODE32)
+
+/* Flags for the "extra" block produced by pcre_study(). */
+
+#define PCRE_STUDY_MAPPED  0x0001  /* a map of starting chars exists */
+#define PCRE_STUDY_MINLEN  0x0002  /* a minimum length field exists */
+
+/* Masks for identifying the public options that are permitted at compile
+time, run time, or study time, respectively. */
+
+#define PCRE_NEWLINE_BITS (PCRE_NEWLINE_CR|PCRE_NEWLINE_LF|PCRE_NEWLINE_ANY| \
+                           PCRE_NEWLINE_ANYCRLF)
+
+#define PUBLIC_COMPILE_OPTIONS \
+  (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \
+   PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \
+   PCRE_NO_AUTO_CAPTURE|PCRE_NO_AUTO_POSSESS| \
+   PCRE_NO_UTF8_CHECK|PCRE_AUTO_CALLOUT|PCRE_FIRSTLINE| \
+   PCRE_DUPNAMES|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \
+   PCRE_JAVASCRIPT_COMPAT|PCRE_UCP|PCRE_NO_START_OPTIMIZE|PCRE_NEVER_UTF)
+
+#define PUBLIC_EXEC_OPTIONS \
+  (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \
+   PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_NEWLINE_BITS| \
+   PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE|PCRE_NO_START_OPTIMIZE)
+
+#define PUBLIC_DFA_EXEC_OPTIONS \
+  (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NOTEMPTY_ATSTART| \
+   PCRE_NO_UTF8_CHECK|PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT|PCRE_DFA_SHORTEST| \
+   PCRE_DFA_RESTART|PCRE_NEWLINE_BITS|PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE| \
+   PCRE_NO_START_OPTIMIZE)
+
+#define PUBLIC_STUDY_OPTIONS \
+   (PCRE_STUDY_JIT_COMPILE|PCRE_STUDY_JIT_PARTIAL_SOFT_COMPILE| \
+    PCRE_STUDY_JIT_PARTIAL_HARD_COMPILE|PCRE_STUDY_EXTRA_NEEDED)
+
+#define PUBLIC_JIT_EXEC_OPTIONS \
+   (PCRE_NO_UTF8_CHECK|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|\
+    PCRE_NOTEMPTY_ATSTART|PCRE_PARTIAL_SOFT|PCRE_PARTIAL_HARD)
+
+/* Magic number to provide a small check against being handed junk. */
+
+#define MAGIC_NUMBER  0x50435245UL   /* 'PCRE' */
+
+/* This variable is used to detect a loaded regular expression
+in different endianness. */
+
+#define REVERSED_MAGIC_NUMBER  0x45524350UL   /* 'ERCP' */
+
+/* The maximum remaining length of subject we are prepared to search for a
+req_byte match. */
+
+#define REQ_BYTE_MAX 1000
+
+/* Miscellaneous definitions. The #ifndef is to pacify compiler warnings in
+environments where these macros are defined elsewhere. Unfortunately, there
+is no way to do the same for the typedef. */
+
+typedef int BOOL;
+
+#ifndef FALSE
+#define FALSE   0
+#define TRUE    1
+#endif
+
+/* If PCRE is to support UTF-8 on EBCDIC platforms, we cannot use normal
+character constants like '*' because the compiler would emit their EBCDIC code,
+which is different from their ASCII/UTF-8 code. Instead we define macros for
+the characters so that they always use the ASCII/UTF-8 code when UTF-8 support
+is enabled. When UTF-8 support is not enabled, the definitions use character
+literals. Both character and string versions of each character are needed, and
+there are some longer strings as well.
+
+This means that, on EBCDIC platforms, the PCRE library can handle either
+EBCDIC, or UTF-8, but not both. To support both in the same compiled library
+would need different lookups depending on whether PCRE_UTF8 was set or not.
+This would make it impossible to use characters in switch/case statements,
+which would reduce performance. For a theoretical use (which nobody has asked
+for) in a minority area (EBCDIC platforms), this is not sensible. Any
+application that did need both could compile two versions of the library, using
+macros to give the functions distinct names. */
+
+#ifndef SUPPORT_UTF
+
+/* UTF-8 support is not enabled; use the platform-dependent character literals
+so that PCRE works in both ASCII and EBCDIC environments, but only in non-UTF
+mode. Newline characters are problematic in EBCDIC. Though it has CR and LF
+characters, a common practice has been to use its NL (0x15) character as the
+line terminator in C-like processing environments. However, sometimes the LF
+(0x25) character is used instead, according to this Unicode document:
+
+http://unicode.org/standard/reports/tr13/tr13-5.html
+
+PCRE defaults EBCDIC NL to 0x15, but has a build-time option to select 0x25
+instead. Whichever is *not* chosen is defined as NEL.
+
+In both ASCII and EBCDIC environments, CHAR_NL and CHAR_LF are synonyms for the
+same code point. */
+
+#ifdef EBCDIC
+
+#ifndef EBCDIC_NL25
+#define CHAR_NL                     '\x15'
+#define CHAR_NEL                    '\x25'
+#define STR_NL                      "\x15"
+#define STR_NEL                     "\x25"
+#else
+#define CHAR_NL                     '\x25'
+#define CHAR_NEL                    '\x15'
+#define STR_NL                      "\x25"
+#define STR_NEL                     "\x15"
+#endif
+
+#define CHAR_LF                     CHAR_NL
+#define STR_LF                      STR_NL
+
+#define CHAR_ESC                    '\047'
+#define CHAR_DEL                    '\007'
+#define CHAR_NBSP                   '\x41'
+#define STR_ESC                     "\047"
+#define STR_DEL                     "\007"
+
+#else  /* Not EBCDIC */
+
+/* In ASCII/Unicode, linefeed is '\n' and we equate this to NL for
+compatibility. NEL is the Unicode newline character; make sure it is
+a positive value. */
+
+#define CHAR_LF                     '\n'
+#define CHAR_NL                     CHAR_LF
+#define CHAR_NEL                    ((unsigned char)'\x85')
+#define CHAR_ESC                    '\033'
+#define CHAR_DEL                    '\177'
+#define CHAR_NBSP                   ((unsigned char)'\xa0')
+
+#define STR_LF                      "\n"
+#define STR_NL                      STR_LF
+#define STR_NEL                     "\x85"
+#define STR_ESC                     "\033"
+#define STR_DEL                     "\177"
+
+#endif  /* EBCDIC */
+
+/* The remaining definitions work in both environments. */
+
+#define CHAR_NULL                   '\0'
+#define CHAR_HT                     '\t'
+#define CHAR_VT                     '\v'
+#define CHAR_FF                     '\f'
+#define CHAR_CR                     '\r'
+#define CHAR_BS                     '\b'
+#define CHAR_BEL                    '\a'
+
+#define CHAR_SPACE                  ' '
+#define CHAR_EXCLAMATION_MARK       '!'
+#define CHAR_QUOTATION_MARK         '"'
+#define CHAR_NUMBER_SIGN            '#'
+#define CHAR_DOLLAR_SIGN            '$'
+#define CHAR_PERCENT_SIGN           '%'
+#define CHAR_AMPERSAND              '&'
+#define CHAR_APOSTROPHE             '\''
+#define CHAR_LEFT_PARENTHESIS       '('
+#define CHAR_RIGHT_PARENTHESIS      ')'
+#define CHAR_ASTERISK               '*'
+#define CHAR_PLUS                   '+'
+#define CHAR_COMMA                  ','
+#define CHAR_MINUS                  '-'
+#define CHAR_DOT                    '.'
+#define CHAR_SLASH                  '/'
+#define CHAR_0                      '0'
+#define CHAR_1                      '1'
+#define CHAR_2                      '2'
+#define CHAR_3                      '3'
+#define CHAR_4                      '4'
+#define CHAR_5                      '5'
+#define CHAR_6                      '6'
+#define CHAR_7                      '7'
+#define CHAR_8                      '8'
+#define CHAR_9                      '9'
+#define CHAR_COLON                  ':'
+#define CHAR_SEMICOLON              ';'
+#define CHAR_LESS_THAN_SIGN         '<'
+#define CHAR_EQUALS_SIGN            '='
+#define CHAR_GREATER_THAN_SIGN      '>'
+#define CHAR_QUESTION_MARK          '?'
+#define CHAR_COMMERCIAL_AT          '@'
+#define CHAR_A                      'A'
+#define CHAR_B                      'B'
+#define CHAR_C                      'C'
+#define CHAR_D                      'D'
+#define CHAR_E                      'E'
+#define CHAR_F                      'F'
+#define CHAR_G                      'G'
+#define CHAR_H                      'H'
+#define CHAR_I                      'I'
+#define CHAR_J                      'J'
+#define CHAR_K                      'K'
+#define CHAR_L                      'L'
+#define CHAR_M                      'M'
+#define CHAR_N                      'N'
+#define CHAR_O                      'O'
+#define CHAR_P                      'P'
+#define CHAR_Q                      'Q'
+#define CHAR_R                      'R'
+#define CHAR_S                      'S'
+#define CHAR_T                      'T'
+#define CHAR_U                      'U'
+#define CHAR_V                      'V'
+#define CHAR_W                      'W'
+#define CHAR_X                      'X'
+#define CHAR_Y                      'Y'
+#define CHAR_Z                      'Z'
+#define CHAR_LEFT_SQUARE_BRACKET    '['
+#define CHAR_BACKSLASH              '\\'
+#define CHAR_RIGHT_SQUARE_BRACKET   ']'
+#define CHAR_CIRCUMFLEX_ACCENT      '^'
+#define CHAR_UNDERSCORE             '_'
+#define CHAR_GRAVE_ACCENT           '`'
+#define CHAR_a                      'a'
+#define CHAR_b                      'b'
+#define CHAR_c                      'c'
+#define CHAR_d                      'd'
+#define CHAR_e                      'e'
+#define CHAR_f                      'f'
+#define CHAR_g                      'g'
+#define CHAR_h                      'h'
+#define CHAR_i                      'i'
+#define CHAR_j                      'j'
+#define CHAR_k                      'k'
+#define CHAR_l                      'l'
+#define CHAR_m                      'm'
+#define CHAR_n                      'n'
+#define CHAR_o                      'o'
+#define CHAR_p                      'p'
+#define CHAR_q                      'q'
+#define CHAR_r                      'r'
+#define CHAR_s                      's'
+#define CHAR_t                      't'
+#define CHAR_u                      'u'
+#define CHAR_v                      'v'
+#define CHAR_w                      'w'
+#define CHAR_x                      'x'
+#define CHAR_y                      'y'
+#define CHAR_z                      'z'
+#define CHAR_LEFT_CURLY_BRACKET     '{'
+#define CHAR_VERTICAL_LINE          '|'
+#define CHAR_RIGHT_CURLY_BRACKET    '}'
+#define CHAR_TILDE                  '~'
+
+#define STR_HT                      "\t"
+#define STR_VT                      "\v"
+#define STR_FF                      "\f"
+#define STR_CR                      "\r"
+#define STR_BS                      "\b"
+#define STR_BEL                     "\a"
+
+#define STR_SPACE                   " "
+#define STR_EXCLAMATION_MARK        "!"
+#define STR_QUOTATION_MARK          "\""
+#define STR_NUMBER_SIGN             "#"
+#define STR_DOLLAR_SIGN             "$"
+#define STR_PERCENT_SIGN            "%"
+#define STR_AMPERSAND               "&"
+#define STR_APOSTROPHE              "'"
+#define STR_LEFT_PARENTHESIS        "("
+#define STR_RIGHT_PARENTHESIS       ")"
+#define STR_ASTERISK                "*"
+#define STR_PLUS                    "+"
+#define STR_COMMA                   ","
+#define STR_MINUS                   "-"
+#define STR_DOT                     "."
+#define STR_SLASH                   "/"
+#define STR_0                       "0"
+#define STR_1                       "1"
+#define STR_2                       "2"
+#define STR_3                       "3"
+#define STR_4                       "4"
+#define STR_5                       "5"
+#define STR_6                       "6"
+#define STR_7                       "7"
+#define STR_8                       "8"
+#define STR_9                       "9"
+#define STR_COLON                   ":"
+#define STR_SEMICOLON               ";"
+#define STR_LESS_THAN_SIGN          "<"
+#define STR_EQUALS_SIGN             "="
+#define STR_GREATER_THAN_SIGN       ">"
+#define STR_QUESTION_MARK           "?"
+#define STR_COMMERCIAL_AT           "@"
+#define STR_A                       "A"
+#define STR_B                       "B"
+#define STR_C                       "C"
+#define STR_D                       "D"
+#define STR_E                       "E"
+#define STR_F                       "F"
+#define STR_G                       "G"
+#define STR_H                       "H"
+#define STR_I                       "I"
+#define STR_J                       "J"
+#define STR_K                       "K"
+#define STR_L                       "L"
+#define STR_M                       "M"
+#define STR_N                       "N"
+#define STR_O                       "O"
+#define STR_P                       "P"
+#define STR_Q                       "Q"
+#define STR_R                       "R"
+#define STR_S                       "S"
+#define STR_T                       "T"
+#define STR_U                       "U"
+#define STR_V                       "V"
+#define STR_W                       "W"
+#define STR_X                       "X"
+#define STR_Y                       "Y"
+#define STR_Z                       "Z"
+#define STR_LEFT_SQUARE_BRACKET     "["
+#define STR_BACKSLASH               "\\"
+#define STR_RIGHT_SQUARE_BRACKET    "]"
+#define STR_CIRCUMFLEX_ACCENT       "^"
+#define STR_UNDERSCORE              "_"
+#define STR_GRAVE_ACCENT            "`"
+#define STR_a                       "a"
+#define STR_b                       "b"
+#define STR_c                       "c"
+#define STR_d                       "d"
+#define STR_e                       "e"
+#define STR_f                       "f"
+#define STR_g                       "g"
+#define STR_h                       "h"
+#define STR_i                       "i"
+#define STR_j                       "j"
+#define STR_k                       "k"
+#define STR_l                       "l"
+#define STR_m                       "m"
+#define STR_n                       "n"
+#define STR_o                       "o"
+#define STR_p                       "p"
+#define STR_q                       "q"
+#define STR_r                       "r"
+#define STR_s                       "s"
+#define STR_t                       "t"
+#define STR_u                       "u"
+#define STR_v                       "v"
+#define STR_w                       "w"
+#define STR_x                       "x"
+#define STR_y                       "y"
+#define STR_z                       "z"
+#define STR_LEFT_CURLY_BRACKET      "{"
+#define STR_VERTICAL_LINE           "|"
+#define STR_RIGHT_CURLY_BRACKET     "}"
+#define STR_TILDE                   "~"
+
+#define STRING_ACCEPT0              "ACCEPT\0"
+#define STRING_COMMIT0              "COMMIT\0"
+#define STRING_F0                   "F\0"
+#define STRING_FAIL0                "FAIL\0"
+#define STRING_MARK0                "MARK\0"
+#define STRING_PRUNE0               "PRUNE\0"
+#define STRING_SKIP0                "SKIP\0"
+#define STRING_THEN                 "THEN"
+
+#define STRING_alpha0               "alpha\0"
+#define STRING_lower0               "lower\0"
+#define STRING_upper0               "upper\0"
+#define STRING_alnum0               "alnum\0"
+#define STRING_ascii0               "ascii\0"
+#define STRING_blank0               "blank\0"
+#define STRING_cntrl0               "cntrl\0"
+#define STRING_digit0               "digit\0"
+#define STRING_graph0               "graph\0"
+#define STRING_print0               "print\0"
+#define STRING_punct0               "punct\0"
+#define STRING_space0               "space\0"
+#define STRING_word0                "word\0"
+#define STRING_xdigit               "xdigit"
+
+#define STRING_DEFINE               "DEFINE"
+#define STRING_WEIRD_STARTWORD      "[:<:]]"
+#define STRING_WEIRD_ENDWORD        "[:>:]]"
+
+#define STRING_CR_RIGHTPAR              "CR)"
+#define STRING_LF_RIGHTPAR              "LF)"
+#define STRING_CRLF_RIGHTPAR            "CRLF)"
+#define STRING_ANY_RIGHTPAR             "ANY)"
+#define STRING_ANYCRLF_RIGHTPAR         "ANYCRLF)"
+#define STRING_BSR_ANYCRLF_RIGHTPAR     "BSR_ANYCRLF)"
+#define STRING_BSR_UNICODE_RIGHTPAR     "BSR_UNICODE)"
+#define STRING_UTF8_RIGHTPAR            "UTF8)"
+#define STRING_UTF16_RIGHTPAR           "UTF16)"
+#define STRING_UTF32_RIGHTPAR           "UTF32)"
+#define STRING_UTF_RIGHTPAR             "UTF)"
+#define STRING_UCP_RIGHTPAR             "UCP)"
+#define STRING_NO_AUTO_POSSESS_RIGHTPAR "NO_AUTO_POSSESS)"
+#define STRING_NO_START_OPT_RIGHTPAR    "NO_START_OPT)"
+#define STRING_LIMIT_MATCH_EQ           "LIMIT_MATCH="
+#define STRING_LIMIT_RECURSION_EQ       "LIMIT_RECURSION="
+
+#else  /* SUPPORT_UTF */
+
+/* UTF-8 support is enabled; always use UTF-8 (=ASCII) character codes. This
+works in both modes non-EBCDIC platforms, and on EBCDIC platforms in UTF-8 mode
+only. */
+
+#define CHAR_HT                     '\011'
+#define CHAR_VT                     '\013'
+#define CHAR_FF                     '\014'
+#define CHAR_CR                     '\015'
+#define CHAR_LF                     '\012'
+#define CHAR_NL                     CHAR_LF
+#define CHAR_NEL                    ((unsigned char)'\x85')
+#define CHAR_BS                     '\010'
+#define CHAR_BEL                    '\007'
+#define CHAR_ESC                    '\033'
+#define CHAR_DEL                    '\177'
+
+#define CHAR_NULL                   '\0'
+#define CHAR_SPACE                  '\040'
+#define CHAR_EXCLAMATION_MARK       '\041'
+#define CHAR_QUOTATION_MARK         '\042'
+#define CHAR_NUMBER_SIGN            '\043'
+#define CHAR_DOLLAR_SIGN            '\044'
+#define CHAR_PERCENT_SIGN           '\045'
+#define CHAR_AMPERSAND              '\046'
+#define CHAR_APOSTROPHE             '\047'
+#define CHAR_LEFT_PARENTHESIS       '\050'
+#define CHAR_RIGHT_PARENTHESIS      '\051'
+#define CHAR_ASTERISK               '\052'
+#define CHAR_PLUS                   '\053'
+#define CHAR_COMMA                  '\054'
+#define CHAR_MINUS                  '\055'
+#define CHAR_DOT                    '\056'
+#define CHAR_SLASH                  '\057'
+#define CHAR_0                      '\060'
+#define CHAR_1                      '\061'
+#define CHAR_2                      '\062'
+#define CHAR_3                      '\063'
+#define CHAR_4                      '\064'
+#define CHAR_5                      '\065'
+#define CHAR_6                      '\066'
+#define CHAR_7                      '\067'
+#define CHAR_8                      '\070'
+#define CHAR_9                      '\071'
+#define CHAR_COLON                  '\072'
+#define CHAR_SEMICOLON              '\073'
+#define CHAR_LESS_THAN_SIGN         '\074'
+#define CHAR_EQUALS_SIGN            '\075'
+#define CHAR_GREATER_THAN_SIGN      '\076'
+#define CHAR_QUESTION_MARK          '\077'
+#define CHAR_COMMERCIAL_AT          '\100'
+#define CHAR_A                      '\101'
+#define CHAR_B                      '\102'
+#define CHAR_C                      '\103'
+#define CHAR_D                      '\104'
+#define CHAR_E                      '\105'
+#define CHAR_F                      '\106'
+#define CHAR_G                      '\107'
+#define CHAR_H                      '\110'
+#define CHAR_I                      '\111'
+#define CHAR_J                      '\112'
+#define CHAR_K                      '\113'
+#define CHAR_L                      '\114'
+#define CHAR_M                      '\115'
+#define CHAR_N                      '\116'
+#define CHAR_O                      '\117'
+#define CHAR_P                      '\120'
+#define CHAR_Q                      '\121'
+#define CHAR_R                      '\122'
+#define CHAR_S                      '\123'
+#define CHAR_T                      '\124'
+#define CHAR_U                      '\125'
+#define CHAR_V                      '\126'
+#define CHAR_W                      '\127'
+#define CHAR_X                      '\130'
+#define CHAR_Y                      '\131'
+#define CHAR_Z                      '\132'
+#define CHAR_LEFT_SQUARE_BRACKET    '\133'
+#define CHAR_BACKSLASH              '\134'
+#define CHAR_RIGHT_SQUARE_BRACKET   '\135'
+#define CHAR_CIRCUMFLEX_ACCENT      '\136'
+#define CHAR_UNDERSCORE             '\137'
+#define CHAR_GRAVE_ACCENT           '\140'
+#define CHAR_a                      '\141'
+#define CHAR_b                      '\142'
+#define CHAR_c                      '\143'
+#define CHAR_d                      '\144'
+#define CHAR_e                      '\145'
+#define CHAR_f                      '\146'
+#define CHAR_g                      '\147'
+#define CHAR_h                      '\150'
+#define CHAR_i                      '\151'
+#define CHAR_j                      '\152'
+#define CHAR_k                      '\153'
+#define CHAR_l                      '\154'
+#define CHAR_m                      '\155'
+#define CHAR_n                      '\156'
+#define CHAR_o                      '\157'
+#define CHAR_p                      '\160'
+#define CHAR_q                      '\161'
+#define CHAR_r                      '\162'
+#define CHAR_s                      '\163'
+#define CHAR_t                      '\164'
+#define CHAR_u                      '\165'
+#define CHAR_v                      '\166'
+#define CHAR_w                      '\167'
+#define CHAR_x                      '\170'
+#define CHAR_y                      '\171'
+#define CHAR_z                      '\172'
+#define CHAR_LEFT_CURLY_BRACKET     '\173'
+#define CHAR_VERTICAL_LINE          '\174'
+#define CHAR_RIGHT_CURLY_BRACKET    '\175'
+#define CHAR_TILDE                  '\176'
+#define CHAR_NBSP                   ((unsigned char)'\xa0')
+
+#define STR_HT                      "\011"
+#define STR_VT                      "\013"
+#define STR_FF                      "\014"
+#define STR_CR                      "\015"
+#define STR_NL                      "\012"
+#define STR_BS                      "\010"
+#define STR_BEL                     "\007"
+#define STR_ESC                     "\033"
+#define STR_DEL                     "\177"
+
+#define STR_SPACE                   "\040"
+#define STR_EXCLAMATION_MARK        "\041"
+#define STR_QUOTATION_MARK          "\042"
+#define STR_NUMBER_SIGN             "\043"
+#define STR_DOLLAR_SIGN             "\044"
+#define STR_PERCENT_SIGN            "\045"
+#define STR_AMPERSAND               "\046"
+#define STR_APOSTROPHE              "\047"
+#define STR_LEFT_PARENTHESIS        "\050"
+#define STR_RIGHT_PARENTHESIS       "\051"
+#define STR_ASTERISK                "\052"
+#define STR_PLUS                    "\053"
+#define STR_COMMA                   "\054"
+#define STR_MINUS                   "\055"
+#define STR_DOT                     "\056"
+#define STR_SLASH                   "\057"
+#define STR_0                       "\060"
+#define STR_1                       "\061"
+#define STR_2                       "\062"
+#define STR_3                       "\063"
+#define STR_4                       "\064"
+#define STR_5                       "\065"
+#define STR_6                       "\066"
+#define STR_7                       "\067"
+#define STR_8                       "\070"
+#define STR_9                       "\071"
+#define STR_COLON                   "\072"
+#define STR_SEMICOLON               "\073"
+#define STR_LESS_THAN_SIGN          "\074"
+#define STR_EQUALS_SIGN             "\075"
+#define STR_GREATER_THAN_SIGN       "\076"
+#define STR_QUESTION_MARK           "\077"
+#define STR_COMMERCIAL_AT           "\100"
+#define STR_A                       "\101"
+#define STR_B                       "\102"
+#define STR_C                       "\103"
+#define STR_D                       "\104"
+#define STR_E                       "\105"
+#define STR_F                       "\106"
+#define STR_G                       "\107"
+#define STR_H                       "\110"
+#define STR_I                       "\111"
+#define STR_J                       "\112"
+#define STR_K                       "\113"
+#define STR_L                       "\114"
+#define STR_M                       "\115"
+#define STR_N                       "\116"
+#define STR_O                       "\117"
+#define STR_P                       "\120"
+#define STR_Q                       "\121"
+#define STR_R                       "\122"
+#define STR_S                       "\123"
+#define STR_T                       "\124"
+#define STR_U                       "\125"
+#define STR_V                       "\126"
+#define STR_W                       "\127"
+#define STR_X                       "\130"
+#define STR_Y                       "\131"
+#define STR_Z                       "\132"
+#define STR_LEFT_SQUARE_BRACKET     "\133"
+#define STR_BACKSLASH               "\134"
+#define STR_RIGHT_SQUARE_BRACKET    "\135"
+#define STR_CIRCUMFLEX_ACCENT       "\136"
+#define STR_UNDERSCORE              "\137"
+#define STR_GRAVE_ACCENT            "\140"
+#define STR_a                       "\141"
+#define STR_b                       "\142"
+#define STR_c                       "\143"
+#define STR_d                       "\144"
+#define STR_e                       "\145"
+#define STR_f                       "\146"
+#define STR_g                       "\147"
+#define STR_h                       "\150"
+#define STR_i                       "\151"
+#define STR_j                       "\152"
+#define STR_k                       "\153"
+#define STR_l                       "\154"
+#define STR_m                       "\155"
+#define STR_n                       "\156"
+#define STR_o                       "\157"
+#define STR_p                       "\160"
+#define STR_q                       "\161"
+#define STR_r                       "\162"
+#define STR_s                       "\163"
+#define STR_t                       "\164"
+#define STR_u                       "\165"
+#define STR_v                       "\166"
+#define STR_w                       "\167"
+#define STR_x                       "\170"
+#define STR_y                       "\171"
+#define STR_z                       "\172"
+#define STR_LEFT_CURLY_BRACKET      "\173"
+#define STR_VERTICAL_LINE           "\174"
+#define STR_RIGHT_CURLY_BRACKET     "\175"
+#define STR_TILDE                   "\176"
+
+#define STRING_ACCEPT0              STR_A STR_C STR_C STR_E STR_P STR_T "\0"
+#define STRING_COMMIT0              STR_C STR_O STR_M STR_M STR_I STR_T "\0"
+#define STRING_F0                   STR_F "\0"
+#define STRING_FAIL0                STR_F STR_A STR_I STR_L "\0"
+#define STRING_MARK0                STR_M STR_A STR_R STR_K "\0"
+#define STRING_PRUNE0               STR_P STR_R STR_U STR_N STR_E "\0"
+#define STRING_SKIP0                STR_S STR_K STR_I STR_P "\0"
+#define STRING_THEN                 STR_T STR_H STR_E STR_N
+
+#define STRING_alpha0               STR_a STR_l STR_p STR_h STR_a "\0"
+#define STRING_lower0               STR_l STR_o STR_w STR_e STR_r "\0"
+#define STRING_upper0               STR_u STR_p STR_p STR_e STR_r "\0"
+#define STRING_alnum0               STR_a STR_l STR_n STR_u STR_m "\0"
+#define STRING_ascii0               STR_a STR_s STR_c STR_i STR_i "\0"
+#define STRING_blank0               STR_b STR_l STR_a STR_n STR_k "\0"
+#define STRING_cntrl0               STR_c STR_n STR_t STR_r STR_l "\0"
+#define STRING_digit0               STR_d STR_i STR_g STR_i STR_t "\0"
+#define STRING_graph0               STR_g STR_r STR_a STR_p STR_h "\0"
+#define STRING_print0               STR_p STR_r STR_i STR_n STR_t "\0"
+#define STRING_punct0               STR_p STR_u STR_n STR_c STR_t "\0"
+#define STRING_space0               STR_s STR_p STR_a STR_c STR_e "\0"
+#define STRING_word0                STR_w STR_o STR_r STR_d       "\0"
+#define STRING_xdigit               STR_x STR_d STR_i STR_g STR_i STR_t
+
+#define STRING_DEFINE               STR_D STR_E STR_F STR_I STR_N STR_E
+#define STRING_WEIRD_STARTWORD      STR_LEFT_SQUARE_BRACKET STR_COLON STR_LESS_THAN_SIGN STR_COLON STR_RIGHT_SQUARE_BRACKET STR_RIGHT_SQUARE_BRACKET
+#define STRING_WEIRD_ENDWORD        STR_LEFT_SQUARE_BRACKET STR_COLON STR_GREATER_THAN_SIGN STR_COLON STR_RIGHT_SQUARE_BRACKET STR_RIGHT_SQUARE_BRACKET
+
+#define STRING_CR_RIGHTPAR              STR_C STR_R STR_RIGHT_PARENTHESIS
+#define STRING_LF_RIGHTPAR              STR_L STR_F STR_RIGHT_PARENTHESIS
+#define STRING_CRLF_RIGHTPAR            STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
+#define STRING_ANY_RIGHTPAR             STR_A STR_N STR_Y STR_RIGHT_PARENTHESIS
+#define STRING_ANYCRLF_RIGHTPAR         STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
+#define STRING_BSR_ANYCRLF_RIGHTPAR     STR_B STR_S STR_R STR_UNDERSCORE STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
+#define STRING_BSR_UNICODE_RIGHTPAR     STR_B STR_S STR_R STR_UNDERSCORE STR_U STR_N STR_I STR_C STR_O STR_D STR_E STR_RIGHT_PARENTHESIS
+#define STRING_UTF8_RIGHTPAR            STR_U STR_T STR_F STR_8 STR_RIGHT_PARENTHESIS
+#define STRING_UTF16_RIGHTPAR           STR_U STR_T STR_F STR_1 STR_6 STR_RIGHT_PARENTHESIS
+#define STRING_UTF32_RIGHTPAR           STR_U STR_T STR_F STR_3 STR_2 STR_RIGHT_PARENTHESIS
+#define STRING_UTF_RIGHTPAR             STR_U STR_T STR_F STR_RIGHT_PARENTHESIS
+#define STRING_UCP_RIGHTPAR             STR_U STR_C STR_P STR_RIGHT_PARENTHESIS
+#define STRING_NO_AUTO_POSSESS_RIGHTPAR STR_N STR_O STR_UNDERSCORE STR_A STR_U STR_T STR_O STR_UNDERSCORE STR_P STR_O STR_S STR_S STR_E STR_S STR_S STR_RIGHT_PARENTHESIS
+#define STRING_NO_START_OPT_RIGHTPAR    STR_N STR_O STR_UNDERSCORE STR_S STR_T STR_A STR_R STR_T STR_UNDERSCORE STR_O STR_P STR_T STR_RIGHT_PARENTHESIS
+#define STRING_LIMIT_MATCH_EQ           STR_L STR_I STR_M STR_I STR_T STR_UNDERSCORE STR_M STR_A STR_T STR_C STR_H STR_EQUALS_SIGN
+#define STRING_LIMIT_RECURSION_EQ       STR_L STR_I STR_M STR_I STR_T STR_UNDERSCORE STR_R STR_E STR_C STR_U STR_R STR_S STR_I STR_O STR_N STR_EQUALS_SIGN
+
+#endif  /* SUPPORT_UTF */
+
+/* Escape items that are just an encoding of a particular data value. */
+
+#ifndef ESC_a
+#define ESC_a CHAR_BEL
+#endif
+
+#ifndef ESC_e
+#define ESC_e CHAR_ESC
+#endif
+
+#ifndef ESC_f
+#define ESC_f CHAR_FF
+#endif
+
+#ifndef ESC_n
+#define ESC_n CHAR_LF
+#endif
+
+#ifndef ESC_r
+#define ESC_r CHAR_CR
+#endif
+
+/* We can't officially use ESC_t because it is a POSIX reserved identifier
+(presumably because of all the others like size_t). */
+
+#ifndef ESC_tee
+#define ESC_tee CHAR_HT
+#endif
+
+/* Codes for different types of Unicode property */
+
+#define PT_ANY        0    /* Any property - matches all chars */
+#define PT_LAMP       1    /* L& - the union of Lu, Ll, Lt */
+#define PT_GC         2    /* Specified general characteristic (e.g. L) */
+#define PT_PC         3    /* Specified particular characteristic (e.g. Lu) */
+#define PT_SC         4    /* Script (e.g. Han) */
+#define PT_ALNUM      5    /* Alphanumeric - the union of L and N */
+#define PT_SPACE      6    /* Perl space - Z plus 9,10,12,13 */
+#define PT_PXSPACE    7    /* POSIX space - Z plus 9,10,11,12,13 */
+#define PT_WORD       8    /* Word - L plus N plus underscore */
+#define PT_CLIST      9    /* Pseudo-property: match character list */
+#define PT_UCNC      10    /* Universal Character nameable character */
+#define PT_TABSIZE   11    /* Size of square table for autopossessify tests */
+
+/* The following special properties are used only in XCLASS items, when POSIX
+classes are specified and PCRE_UCP is set - in other words, for Unicode
+handling of these classes. They are not available via the \p or \P escapes like
+those in the above list, and so they do not take part in the autopossessifying
+table. */
+
+#define PT_PXGRAPH   11    /* [:graph:] - characters that mark the paper */
+#define PT_PXPRINT   12    /* [:print:] - [:graph:] plus non-control spaces */
+#define PT_PXPUNCT   13    /* [:punct:] - punctuation characters */
+
+/* Flag bits and data types for the extended class (OP_XCLASS) for classes that
+contain characters with values greater than 255. */
+
+#define XCL_NOT       0x01    /* Flag: this is a negative class */
+#define XCL_MAP       0x02    /* Flag: a 32-byte map is present */
+#define XCL_HASPROP   0x04    /* Flag: property checks are present. */
+
+#define XCL_END       0    /* Marks end of individual items */
+#define XCL_SINGLE    1    /* Single item (one multibyte char) follows */
+#define XCL_RANGE     2    /* A range (two multibyte chars) follows */
+#define XCL_PROP      3    /* Unicode property (2-byte property code follows) */
+#define XCL_NOTPROP   4    /* Unicode inverted property (ditto) */
+
+/* These are escaped items that aren't just an encoding of a particular data
+value such as \n. They must have non-zero values, as check_escape() returns 0
+for a data character.  Also, they must appear in the same order as in the
+opcode definitions below, up to ESC_z. There's a dummy for OP_ALLANY because it
+corresponds to "." in DOTALL mode rather than an escape sequence. It is also
+used for [^] in JavaScript compatibility mode, and for \C in non-utf mode. In
+non-DOTALL mode, "." behaves like \N.
+
+The special values ESC_DU, ESC_du, etc. are used instead of ESC_D, ESC_d, etc.
+when PCRE_UCP is set and replacement of \d etc by \p sequences is required.
+They must be contiguous, and remain in order so that the replacements can be
+looked up from a table.
+
+Negative numbers are used to encode a backreference (\1, \2, \3, etc.) in
+check_escape(). There are two tests in the code for an escape
+greater than ESC_b and less than ESC_Z to detect the types that may be
+repeated. These are the types that consume characters. If any new escapes are
+put in between that don't consume a character, that code will have to change.
+*/
+
+enum { ESC_A = 1, ESC_G, ESC_K, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s,
+       ESC_W, ESC_w, ESC_N, ESC_dum, ESC_C, ESC_P, ESC_p, ESC_R, ESC_H,
+       ESC_h, ESC_V, ESC_v, ESC_X, ESC_Z, ESC_z,
+       ESC_E, ESC_Q, ESC_g, ESC_k,
+       ESC_DU, ESC_du, ESC_SU, ESC_su, ESC_WU, ESC_wu };
+
+
+/********************** Opcode definitions ******************/
+
+/****** NOTE NOTE NOTE ******
+
+Starting from 1 (i.e. after OP_END), the values up to OP_EOD must correspond in
+order to the list of escapes immediately above. Furthermore, values up to
+OP_DOLLM must not be changed without adjusting the table called autoposstab in
+pcre_compile.c
+
+Whenever this list is updated, the two macro definitions that follow must be
+updated to match. The possessification table called "opcode_possessify" in
+pcre_compile.c must also be updated, and also the tables called "coptable"
+and "poptable" in pcre_dfa_exec.c.
+
+****** NOTE NOTE NOTE ******/
+
+
+/* The values between FIRST_AUTOTAB_OP and LAST_AUTOTAB_RIGHT_OP, inclusive,
+are used in a table for deciding whether a repeated character type can be
+auto-possessified. */
+
+#define FIRST_AUTOTAB_OP       OP_NOT_DIGIT
+#define LAST_AUTOTAB_LEFT_OP   OP_EXTUNI
+#define LAST_AUTOTAB_RIGHT_OP  OP_DOLLM
+
+enum {
+  OP_END,            /* 0 End of pattern */
+
+  /* Values corresponding to backslashed metacharacters */
+
+  OP_SOD,            /* 1 Start of data: \A */
+  OP_SOM,            /* 2 Start of match (subject + offset): \G */
+  OP_SET_SOM,        /* 3 Set start of match (\K) */
+  OP_NOT_WORD_BOUNDARY,  /*  4 \B */
+  OP_WORD_BOUNDARY,      /*  5 \b */
+  OP_NOT_DIGIT,          /*  6 \D */
+  OP_DIGIT,              /*  7 \d */
+  OP_NOT_WHITESPACE,     /*  8 \S */
+  OP_WHITESPACE,         /*  9 \s */
+  OP_NOT_WORDCHAR,       /* 10 \W */
+  OP_WORDCHAR,           /* 11 \w */
+
+  OP_ANY,            /* 12 Match any character except newline (\N) */
+  OP_ALLANY,         /* 13 Match any character */
+  OP_ANYBYTE,        /* 14 Match any byte (\C); different to OP_ANY for UTF-8 */
+  OP_NOTPROP,        /* 15 \P (not Unicode property) */
+  OP_PROP,           /* 16 \p (Unicode property) */
+  OP_ANYNL,          /* 17 \R (any newline sequence) */
+  OP_NOT_HSPACE,     /* 18 \H (not horizontal whitespace) */
+  OP_HSPACE,         /* 19 \h (horizontal whitespace) */
+  OP_NOT_VSPACE,     /* 20 \V (not vertical whitespace) */
+  OP_VSPACE,         /* 21 \v (vertical whitespace) */
+  OP_EXTUNI,         /* 22 \X (extended Unicode sequence */
+  OP_EODN,           /* 23 End of data or \n at end of data (\Z) */
+  OP_EOD,            /* 24 End of data (\z) */
+
+  /* Line end assertions */
+
+  OP_DOLL,           /* 25 End of line - not multiline */
+  OP_DOLLM,          /* 26 End of line - multiline */
+  OP_CIRC,           /* 27 Start of line - not multiline */
+  OP_CIRCM,          /* 28 Start of line - multiline */
+
+  /* Single characters; caseful must precede the caseless ones */
+
+  OP_CHAR,           /* 29 Match one character, casefully */
+  OP_CHARI,          /* 30 Match one character, caselessly */
+  OP_NOT,            /* 31 Match one character, not the given one, casefully */
+  OP_NOTI,           /* 32 Match one character, not the given one, caselessly */
+
+  /* The following sets of 13 opcodes must always be kept in step because
+  the offset from the first one is used to generate the others. */
+
+  /* Repeated characters; caseful must precede the caseless ones */
+
+  OP_STAR,           /* 33 The maximizing and minimizing versions of */
+  OP_MINSTAR,        /* 34 these six opcodes must come in pairs, with */
+  OP_PLUS,           /* 35 the minimizing one second. */
+  OP_MINPLUS,        /* 36 */
+  OP_QUERY,          /* 37 */
+  OP_MINQUERY,       /* 38 */
+
+  OP_UPTO,           /* 39 From 0 to n matches of one character, caseful*/
+  OP_MINUPTO,        /* 40 */
+  OP_EXACT,          /* 41 Exactly n matches */
+
+  OP_POSSTAR,        /* 42 Possessified star, caseful */
+  OP_POSPLUS,        /* 43 Possessified plus, caseful */
+  OP_POSQUERY,       /* 44 Posesssified query, caseful */
+  OP_POSUPTO,        /* 45 Possessified upto, caseful */
+
+  /* Repeated characters; caseless must follow the caseful ones */
+
+  OP_STARI,          /* 46 */
+  OP_MINSTARI,       /* 47 */
+  OP_PLUSI,          /* 48 */
+  OP_MINPLUSI,       /* 49 */
+  OP_QUERYI,         /* 50 */
+  OP_MINQUERYI,      /* 51 */
+
+  OP_UPTOI,          /* 52 From 0 to n matches of one character, caseless */
+  OP_MINUPTOI,       /* 53 */
+  OP_EXACTI,         /* 54 */
+
+  OP_POSSTARI,       /* 55 Possessified star, caseless */
+  OP_POSPLUSI,       /* 56 Possessified plus, caseless */
+  OP_POSQUERYI,      /* 57 Posesssified query, caseless */
+  OP_POSUPTOI,       /* 58 Possessified upto, caseless */
+
+  /* The negated ones must follow the non-negated ones, and match them */
+  /* Negated repeated character, caseful; must precede the caseless ones */
+
+  OP_NOTSTAR,        /* 59 The maximizing and minimizing versions of */
+  OP_NOTMINSTAR,     /* 60 these six opcodes must come in pairs, with */
+  OP_NOTPLUS,        /* 61 the minimizing one second. They must be in */
+  OP_NOTMINPLUS,     /* 62 exactly the same order as those above. */
+  OP_NOTQUERY,       /* 63 */
+  OP_NOTMINQUERY,    /* 64 */
+
+  OP_NOTUPTO,        /* 65 From 0 to n matches, caseful */
+  OP_NOTMINUPTO,     /* 66 */
+  OP_NOTEXACT,       /* 67 Exactly n matches */
+
+  OP_NOTPOSSTAR,     /* 68 Possessified versions, caseful */
+  OP_NOTPOSPLUS,     /* 69 */
+  OP_NOTPOSQUERY,    /* 70 */
+  OP_NOTPOSUPTO,     /* 71 */
+
+  /* Negated repeated character, caseless; must follow the caseful ones */
+
+  OP_NOTSTARI,       /* 72 */
+  OP_NOTMINSTARI,    /* 73 */
+  OP_NOTPLUSI,       /* 74 */
+  OP_NOTMINPLUSI,    /* 75 */
+  OP_NOTQUERYI,      /* 76 */
+  OP_NOTMINQUERYI,   /* 77 */
+
+  OP_NOTUPTOI,       /* 78 From 0 to n matches, caseless */
+  OP_NOTMINUPTOI,    /* 79 */
+  OP_NOTEXACTI,      /* 80 Exactly n matches */
+
+  OP_NOTPOSSTARI,    /* 81 Possessified versions, caseless */
+  OP_NOTPOSPLUSI,    /* 82 */
+  OP_NOTPOSQUERYI,   /* 83 */
+  OP_NOTPOSUPTOI,    /* 84 */
+
+  /* Character types */
+
+  OP_TYPESTAR,       /* 85 The maximizing and minimizing versions of */
+  OP_TYPEMINSTAR,    /* 86 these six opcodes must come in pairs, with */
+  OP_TYPEPLUS,       /* 87 the minimizing one second. These codes must */
+  OP_TYPEMINPLUS,    /* 88 be in exactly the same order as those above. */
+  OP_TYPEQUERY,      /* 89 */
+  OP_TYPEMINQUERY,   /* 90 */
+
+  OP_TYPEUPTO,       /* 91 From 0 to n matches */
+  OP_TYPEMINUPTO,    /* 92 */
+  OP_TYPEEXACT,      /* 93 Exactly n matches */
+
+  OP_TYPEPOSSTAR,    /* 94 Possessified versions */
+  OP_TYPEPOSPLUS,    /* 95 */
+  OP_TYPEPOSQUERY,   /* 96 */
+  OP_TYPEPOSUPTO,    /* 97 */
+
+  /* These are used for character classes and back references; only the
+  first six are the same as the sets above. */
+
+  OP_CRSTAR,         /* 98 The maximizing and minimizing versions of */
+  OP_CRMINSTAR,      /* 99 all these opcodes must come in pairs, with */
+  OP_CRPLUS,         /* 100 the minimizing one second. These codes must */
+  OP_CRMINPLUS,      /* 101 be in exactly the same order as those above. */
+  OP_CRQUERY,        /* 102 */
+  OP_CRMINQUERY,     /* 103 */
+
+  OP_CRRANGE,        /* 104 These are different to the three sets above. */
+  OP_CRMINRANGE,     /* 105 */
+
+  OP_CRPOSSTAR,      /* 106 Possessified versions */
+  OP_CRPOSPLUS,      /* 107 */
+  OP_CRPOSQUERY,     /* 108 */
+  OP_CRPOSRANGE,     /* 109 */
+
+  /* End of quantifier opcodes */
+
+  OP_CLASS,          /* 110 Match a character class, chars < 256 only */
+  OP_NCLASS,         /* 111 Same, but the bitmap was created from a negative
+                              class - the difference is relevant only when a
+                              character > 255 is encountered. */
+  OP_XCLASS,         /* 112 Extended class for handling > 255 chars within the
+                              class. This does both positive and negative. */
+  OP_REF,            /* 113 Match a back reference, casefully */
+  OP_REFI,           /* 114 Match a back reference, caselessly */
+  OP_DNREF,          /* 115 Match a duplicate name backref, casefully */
+  OP_DNREFI,         /* 116 Match a duplicate name backref, caselessly */
+  OP_RECURSE,        /* 117 Match a numbered subpattern (possibly recursive) */
+  OP_CALLOUT,        /* 118 Call out to external function if provided */
+
+  OP_ALT,            /* 119 Start of alternation */
+  OP_KET,            /* 120 End of group that doesn't have an unbounded repeat */
+  OP_KETRMAX,        /* 121 These two must remain together and in this */
+  OP_KETRMIN,        /* 122 order. They are for groups the repeat for ever. */
+  OP_KETRPOS,        /* 123 Possessive unlimited repeat. */
+
+  /* The assertions must come before BRA, CBRA, ONCE, and COND, and the four
+  asserts must remain in order. */
+
+  OP_REVERSE,        /* 124 Move pointer back - used in lookbehind assertions */
+  OP_ASSERT,         /* 125 Positive lookahead */
+  OP_ASSERT_NOT,     /* 126 Negative lookahead */
+  OP_ASSERTBACK,     /* 127 Positive lookbehind */
+  OP_ASSERTBACK_NOT, /* 128 Negative lookbehind */
+
+  /* ONCE, ONCE_NC, BRA, BRAPOS, CBRA, CBRAPOS, and COND must come immediately
+  after the assertions, with ONCE first, as there's a test for >= ONCE for a
+  subpattern that isn't an assertion. The POS versions must immediately follow
+  the non-POS versions in each case. */
+
+  OP_ONCE,           /* 129 Atomic group, contains captures */
+  OP_ONCE_NC,        /* 130 Atomic group containing no captures */
+  OP_BRA,            /* 131 Start of non-capturing bracket */
+  OP_BRAPOS,         /* 132 Ditto, with unlimited, possessive repeat */
+  OP_CBRA,           /* 133 Start of capturing bracket */
+  OP_CBRAPOS,        /* 134 Ditto, with unlimited, possessive repeat */
+  OP_COND,           /* 135 Conditional group */
+
+  /* These five must follow the previous five, in the same order. There's a
+  check for >= SBRA to distinguish the two sets. */
+
+  OP_SBRA,           /* 136 Start of non-capturing bracket, check empty  */
+  OP_SBRAPOS,        /* 137 Ditto, with unlimited, possessive repeat */
+  OP_SCBRA,          /* 138 Start of capturing bracket, check empty */
+  OP_SCBRAPOS,       /* 139 Ditto, with unlimited, possessive repeat */
+  OP_SCOND,          /* 140 Conditional group, check empty */
+
+  /* The next two pairs must (respectively) be kept together. */
+
+  OP_CREF,           /* 141 Used to hold a capture number as condition */
+  OP_DNCREF,         /* 142 Used to point to duplicate names as a condition */
+  OP_RREF,           /* 143 Used to hold a recursion number as condition */
+  OP_DNRREF,         /* 144 Used to point to duplicate names as a condition */
+  OP_DEF,            /* 145 The DEFINE condition */
+
+  OP_BRAZERO,        /* 146 These two must remain together and in this */
+  OP_BRAMINZERO,     /* 147 order. */
+  OP_BRAPOSZERO,     /* 148 */
+
+  /* These are backtracking control verbs */
+
+  OP_MARK,           /* 149 always has an argument */
+  OP_PRUNE,          /* 150 */
+  OP_PRUNE_ARG,      /* 151 same, but with argument */
+  OP_SKIP,           /* 152 */
+  OP_SKIP_ARG,       /* 153 same, but with argument */
+  OP_THEN,           /* 154 */
+  OP_THEN_ARG,       /* 155 same, but with argument */
+  OP_COMMIT,         /* 156 */
+
+  /* These are forced failure and success verbs */
+
+  OP_FAIL,           /* 157 */
+  OP_ACCEPT,         /* 158 */
+  OP_ASSERT_ACCEPT,  /* 159 Used inside assertions */
+  OP_CLOSE,          /* 160 Used before OP_ACCEPT to close open captures */
+
+  /* This is used to skip a subpattern with a {0} quantifier */
+
+  OP_SKIPZERO,       /* 161 */
+
+  /* This is not an opcode, but is used to check that tables indexed by opcode
+  are the correct length, in order to catch updating errors - there have been
+  some in the past. */
+
+  OP_TABLE_LENGTH
+};
+
+/* *** NOTE NOTE NOTE *** Whenever the list above is updated, the two macro
+definitions that follow must also be updated to match. There are also tables
+called "opcode_possessify" in pcre_compile.c and "coptable" and "poptable" in
+pcre_dfa_exec.c that must be updated. */
+
+
+/* This macro defines textual names for all the opcodes. These are used only
+for debugging, and some of them are only partial names. The macro is referenced
+only in pcre_printint.c, which fills out the full names in many cases (and in
+some cases doesn't actually use these names at all). */
+
+#define OP_NAME_LIST \
+  "End", "\\A", "\\G", "\\K", "\\B", "\\b", "\\D", "\\d",         \
+  "\\S", "\\s", "\\W", "\\w", "Any", "AllAny", "Anybyte",         \
+  "notprop", "prop", "\\R", "\\H", "\\h", "\\V", "\\v",           \
+  "extuni",  "\\Z", "\\z",                                        \
+  "$", "$", "^", "^", "char", "chari", "not", "noti",             \
+  "*", "*?", "+", "+?", "?", "??",                                \
+  "{", "{", "{",                                                  \
+  "*+","++", "?+", "{",                                           \
+  "*", "*?", "+", "+?", "?", "??",                                \
+  "{", "{", "{",                                                  \
+  "*+","++", "?+", "{",                                           \
+  "*", "*?", "+", "+?", "?", "??",                                \
+  "{", "{", "{",                                                  \
+  "*+","++", "?+", "{",                                           \
+  "*", "*?", "+", "+?", "?", "??",                                \
+  "{", "{", "{",                                                  \
+  "*+","++", "?+", "{",                                           \
+  "*", "*?", "+", "+?", "?", "??", "{", "{", "{",                 \
+  "*+","++", "?+", "{",                                           \
+  "*", "*?", "+", "+?", "?", "??", "{", "{",                      \
+  "*+","++", "?+", "{",                                           \
+  "class", "nclass", "xclass", "Ref", "Refi", "DnRef", "DnRefi",  \
+  "Recurse", "Callout",                                           \
+  "Alt", "Ket", "KetRmax", "KetRmin", "KetRpos",                  \
+  "Reverse", "Assert", "Assert not", "AssertB", "AssertB not",    \
+  "Once", "Once_NC",                                              \
+  "Bra", "BraPos", "CBra", "CBraPos",                             \
+  "Cond",                                                         \
+  "SBra", "SBraPos", "SCBra", "SCBraPos",                         \
+  "SCond",                                                        \
+  "Cond ref", "Cond dnref", "Cond rec", "Cond dnrec", "Cond def", \
+  "Brazero", "Braminzero", "Braposzero",                          \
+  "*MARK", "*PRUNE", "*PRUNE", "*SKIP", "*SKIP",                  \
+  "*THEN", "*THEN", "*COMMIT", "*FAIL",                           \
+  "*ACCEPT", "*ASSERT_ACCEPT",                                    \
+  "Close", "Skip zero"
+
+
+/* This macro defines the length of fixed length operations in the compiled
+regex. The lengths are used when searching for specific things, and also in the
+debugging printing of a compiled regex. We use a macro so that it can be
+defined close to the definitions of the opcodes themselves.
+
+As things have been extended, some of these are no longer fixed lenths, but are
+minima instead. For example, the length of a single-character repeat may vary
+in UTF-8 mode. The code that uses this table must know about such things. */
+
+#define OP_LENGTHS \
+  1,                             /* End                                    */ \
+  1, 1, 1, 1, 1,                 /* \A, \G, \K, \B, \b                     */ \
+  1, 1, 1, 1, 1, 1,              /* \D, \d, \S, \s, \W, \w                 */ \
+  1, 1, 1,                       /* Any, AllAny, Anybyte                   */ \
+  3, 3,                          /* \P, \p                                 */ \
+  1, 1, 1, 1, 1,                 /* \R, \H, \h, \V, \v                     */ \
+  1,                             /* \X                                     */ \
+  1, 1, 1, 1, 1, 1,              /* \Z, \z, $, $M ^, ^M                    */ \
+  2,                             /* Char  - the minimum length             */ \
+  2,                             /* Chari  - the minimum length            */ \
+  2,                             /* not                                    */ \
+  2,                             /* noti                                   */ \
+  /* Positive single-char repeats                             ** These are */ \
+  2, 2, 2, 2, 2, 2,              /* *, *?, +, +?, ?, ??       ** minima in */ \
+  2+IMM2_SIZE, 2+IMM2_SIZE,      /* upto, minupto             ** mode      */ \
+  2+IMM2_SIZE,                   /* exact                                  */ \
+  2, 2, 2, 2+IMM2_SIZE,          /* *+, ++, ?+, upto+                      */ \
+  2, 2, 2, 2, 2, 2,              /* *I, *?I, +I, +?I, ?I, ??I ** UTF-8     */ \
+  2+IMM2_SIZE, 2+IMM2_SIZE,      /* upto I, minupto I                      */ \
+  2+IMM2_SIZE,                   /* exact I                                */ \
+  2, 2, 2, 2+IMM2_SIZE,          /* *+I, ++I, ?+I, upto+I                  */ \
+  /* Negative single-char repeats - only for chars < 256                   */ \
+  2, 2, 2, 2, 2, 2,              /* NOT *, *?, +, +?, ?, ??                */ \
+  2+IMM2_SIZE, 2+IMM2_SIZE,      /* NOT upto, minupto                      */ \
+  2+IMM2_SIZE,                   /* NOT exact                              */ \
+  2, 2, 2, 2+IMM2_SIZE,          /* Possessive NOT *, +, ?, upto           */ \
+  2, 2, 2, 2, 2, 2,              /* NOT *I, *?I, +I, +?I, ?I, ??I          */ \
+  2+IMM2_SIZE, 2+IMM2_SIZE,      /* NOT upto I, minupto I                  */ \
+  2+IMM2_SIZE,                   /* NOT exact I                            */ \
+  2, 2, 2, 2+IMM2_SIZE,          /* Possessive NOT *I, +I, ?I, upto I      */ \
+  /* Positive type repeats                                                 */ \
+  2, 2, 2, 2, 2, 2,              /* Type *, *?, +, +?, ?, ??               */ \
+  2+IMM2_SIZE, 2+IMM2_SIZE,      /* Type upto, minupto                     */ \
+  2+IMM2_SIZE,                   /* Type exact                             */ \
+  2, 2, 2, 2+IMM2_SIZE,          /* Possessive *+, ++, ?+, upto+           */ \
+  /* Character class & ref repeats                                         */ \
+  1, 1, 1, 1, 1, 1,              /* *, *?, +, +?, ?, ??                    */ \
+  1+2*IMM2_SIZE, 1+2*IMM2_SIZE,  /* CRRANGE, CRMINRANGE                    */ \
+  1, 1, 1, 1+2*IMM2_SIZE,        /* Possessive *+, ++, ?+, CRPOSRANGE      */ \
+  1+(32/sizeof(pcre_uchar)),     /* CLASS                                  */ \
+  1+(32/sizeof(pcre_uchar)),     /* NCLASS                                 */ \
+  0,                             /* XCLASS - variable length               */ \
+  1+IMM2_SIZE,                   /* REF                                    */ \
+  1+IMM2_SIZE,                   /* REFI                                   */ \
+  1+2*IMM2_SIZE,                 /* DNREF                                  */ \
+  1+2*IMM2_SIZE,                 /* DNREFI                                 */ \
+  1+LINK_SIZE,                   /* RECURSE                                */ \
+  2+2*LINK_SIZE,                 /* CALLOUT                                */ \
+  1+LINK_SIZE,                   /* Alt                                    */ \
+  1+LINK_SIZE,                   /* Ket                                    */ \
+  1+LINK_SIZE,                   /* KetRmax                                */ \
+  1+LINK_SIZE,                   /* KetRmin                                */ \
+  1+LINK_SIZE,                   /* KetRpos                                */ \
+  1+LINK_SIZE,                   /* Reverse                                */ \
+  1+LINK_SIZE,                   /* Assert                                 */ \
+  1+LINK_SIZE,                   /* Assert not                             */ \
+  1+LINK_SIZE,                   /* Assert behind                          */ \
+  1+LINK_SIZE,                   /* Assert behind not                      */ \
+  1+LINK_SIZE,                   /* ONCE                                   */ \
+  1+LINK_SIZE,                   /* ONCE_NC                                */ \
+  1+LINK_SIZE,                   /* BRA                                    */ \
+  1+LINK_SIZE,                   /* BRAPOS                                 */ \
+  1+LINK_SIZE+IMM2_SIZE,         /* CBRA                                   */ \
+  1+LINK_SIZE+IMM2_SIZE,         /* CBRAPOS                                */ \
+  1+LINK_SIZE,                   /* COND                                   */ \
+  1+LINK_SIZE,                   /* SBRA                                   */ \
+  1+LINK_SIZE,                   /* SBRAPOS                                */ \
+  1+LINK_SIZE+IMM2_SIZE,         /* SCBRA                                  */ \
+  1+LINK_SIZE+IMM2_SIZE,         /* SCBRAPOS                               */ \
+  1+LINK_SIZE,                   /* SCOND                                  */ \
+  1+IMM2_SIZE, 1+2*IMM2_SIZE,    /* CREF, DNCREF                           */ \
+  1+IMM2_SIZE, 1+2*IMM2_SIZE,    /* RREF, DNRREF                           */ \
+  1,                             /* DEF                                    */ \
+  1, 1, 1,                       /* BRAZERO, BRAMINZERO, BRAPOSZERO        */ \
+  3, 1, 3,                       /* MARK, PRUNE, PRUNE_ARG                 */ \
+  1, 3,                          /* SKIP, SKIP_ARG                         */ \
+  1, 3,                          /* THEN, THEN_ARG                         */ \
+  1, 1, 1, 1,                    /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT    */ \
+  1+IMM2_SIZE, 1                 /* CLOSE, SKIPZERO                        */
+
+/* A magic value for OP_RREF to indicate the "any recursion" condition. */
+
+#define RREF_ANY  0xffff
+
+/* Compile time error code numbers. They are given names so that they can more
+easily be tracked. When a new number is added, the table called eint in
+pcreposix.c must be updated. */
+
+enum { ERR0,  ERR1,  ERR2,  ERR3,  ERR4,  ERR5,  ERR6,  ERR7,  ERR8,  ERR9,
+       ERR10, ERR11, ERR12, ERR13, ERR14, ERR15, ERR16, ERR17, ERR18, ERR19,
+       ERR20, ERR21, ERR22, ERR23, ERR24, ERR25, ERR26, ERR27, ERR28, ERR29,
+       ERR30, ERR31, ERR32, ERR33, ERR34, ERR35, ERR36, ERR37, ERR38, ERR39,
+       ERR40, ERR41, ERR42, ERR43, ERR44, ERR45, ERR46, ERR47, ERR48, ERR49,
+       ERR50, ERR51, ERR52, ERR53, ERR54, ERR55, ERR56, ERR57, ERR58, ERR59,
+       ERR60, ERR61, ERR62, ERR63, ERR64, ERR65, ERR66, ERR67, ERR68, ERR69,
+       ERR70, ERR71, ERR72, ERR73, ERR74, ERR75, ERR76, ERR77, ERR78, ERR79,
+       ERR80, ERR81, ERR82, ERR83, ERR84, ERR85, ERR86, ERR87, ERRCOUNT };
+
+/* JIT compiling modes. The function list is indexed by them. */
+
+enum { JIT_COMPILE, JIT_PARTIAL_SOFT_COMPILE, JIT_PARTIAL_HARD_COMPILE,
+       JIT_NUMBER_OF_COMPILE_MODES };
+
+/* The real format of the start of the pcre block; the index of names and the
+code vector run on as long as necessary after the end. We store an explicit
+offset to the name table so that if a regex is compiled on one host, saved, and
+then run on another where the size of pointers is different, all might still
+be well.
+
+The size of the structure must be a multiple of 8 bytes. For the case of
+compiled-on-4 and run-on-8, we include an extra pointer that is always NULL so
+that there are an even number of pointers which therefore are a multiple of 8
+bytes.
+
+It is necessary to fork the struct for the 32 bit library, since it needs to
+use pcre_uint32 for first_char and req_char. We can't put an ifdef inside the
+typedef because pcretest needs access to the struct of the 8-, 16- and 32-bit
+variants.
+
+*** WARNING ***
+When new fields are added to these structures, remember to adjust the code in
+pcre_byte_order.c that is concerned with swapping the byte order of the fields
+when a compiled regex is reloaded on a host with different endianness.
+*** WARNING ***
+There is also similar byte-flipping code in pcretest.c, which is used for
+testing the byte-flipping features. It must also be kept in step.
+*** WARNING ***
+*/
+
+typedef struct real_pcre8_or_16 {
+  pcre_uint32 magic_number;
+  pcre_uint32 size;               /* Total that was malloced */
+  pcre_uint32 options;            /* Public options */
+  pcre_uint32 flags;              /* Private flags */
+  pcre_uint32 limit_match;        /* Limit set from regex */
+  pcre_uint32 limit_recursion;    /* Limit set from regex */
+  pcre_uint16 first_char;         /* Starting character */
+  pcre_uint16 req_char;           /* This character must be seen */
+  pcre_uint16 max_lookbehind;     /* Longest lookbehind (characters) */
+  pcre_uint16 top_bracket;        /* Highest numbered group */
+  pcre_uint16 top_backref;        /* Highest numbered back reference */
+  pcre_uint16 name_table_offset;  /* Offset to name table that follows */
+  pcre_uint16 name_entry_size;    /* Size of any name items */
+  pcre_uint16 name_count;         /* Number of name items */
+  pcre_uint16 ref_count;          /* Reference count */
+  pcre_uint16 dummy1;             /* To ensure size is a multiple of 8 */
+  pcre_uint16 dummy2;             /* To ensure size is a multiple of 8 */
+  pcre_uint16 dummy3;             /* To ensure size is a multiple of 8 */
+  const pcre_uint8 *tables;       /* Pointer to tables or NULL for std */
+  void             *nullpad;      /* NULL padding */
+} real_pcre8_or_16;
+
+typedef struct real_pcre8_or_16 real_pcre;
+typedef struct real_pcre8_or_16 real_pcre16;
+
+typedef struct real_pcre32 {
+  pcre_uint32 magic_number;
+  pcre_uint32 size;               /* Total that was malloced */
+  pcre_uint32 options;            /* Public options */
+  pcre_uint32 flags;              /* Private flags */
+  pcre_uint32 limit_match;        /* Limit set from regex */
+  pcre_uint32 limit_recursion;    /* Limit set from regex */
+  pcre_uint32 first_char;         /* Starting character */
+  pcre_uint32 req_char;           /* This character must be seen */
+  pcre_uint16 max_lookbehind;     /* Longest lookbehind (characters) */
+  pcre_uint16 top_bracket;        /* Highest numbered group */
+  pcre_uint16 top_backref;        /* Highest numbered back reference */
+  pcre_uint16 name_table_offset;  /* Offset to name table that follows */
+  pcre_uint16 name_entry_size;    /* Size of any name items */
+  pcre_uint16 name_count;         /* Number of name items */
+  pcre_uint16 ref_count;          /* Reference count */
+  pcre_uint16 dummy;              /* To ensure size is a multiple of 8 */
+  const pcre_uint8 *tables;       /* Pointer to tables or NULL for std */
+  void             *nullpad;      /* NULL padding */
+} real_pcre32;
+
+#if defined COMPILE_PCRE8
+#define REAL_PCRE real_pcre
+#elif defined COMPILE_PCRE16
+#define REAL_PCRE real_pcre16
+#elif defined COMPILE_PCRE32
+#define REAL_PCRE real_pcre32
+#endif
+
+/* Assert that the size of REAL_PCRE is divisible by 8 */
+typedef int __assert_real_pcre_size_divisible_8[(sizeof(REAL_PCRE) % 8) == 0 ? 1 : -1];
+
+/* Needed in pcretest to access some fields in the real_pcre* structures
+ * directly. They're unified for 8/16/32 bits since the structs only differ
+ * after these fields; if that ever changes, need to fork those defines into
+ * 8/16 and 32 bit versions. */
+#define REAL_PCRE_MAGIC(re)     (((REAL_PCRE*)re)->magic_number)
+#define REAL_PCRE_SIZE(re)      (((REAL_PCRE*)re)->size)
+#define REAL_PCRE_OPTIONS(re)   (((REAL_PCRE*)re)->options)
+#define REAL_PCRE_FLAGS(re)     (((REAL_PCRE*)re)->flags)
+
+/* The format of the block used to store data from pcre_study(). The same
+remark (see NOTE above) about extending this structure applies. */
+
+typedef struct pcre_study_data {
+  pcre_uint32 size;               /* Total that was malloced */
+  pcre_uint32 flags;              /* Private flags */
+  pcre_uint8 start_bits[32];      /* Starting char bits */
+  pcre_uint32 minlength;          /* Minimum subject length */
+} pcre_study_data;
+
+/* Structure for building a chain of open capturing subpatterns during
+compiling, so that instructions to close them can be compiled when (*ACCEPT) is
+encountered. This is also used to identify subpatterns that contain recursive
+back references to themselves, so that they can be made atomic. */
+
+typedef struct open_capitem {
+  struct open_capitem *next;    /* Chain link */
+  pcre_uint16 number;           /* Capture number */
+  pcre_uint16 flag;             /* Set TRUE if recursive back ref */
+} open_capitem;
+
+/* Structure for building a list of named groups during the first pass of
+compiling. */
+
+typedef struct named_group {
+  const pcre_uchar  *name;          /* Points to the name in the pattern */
+  int                length;        /* Length of the name */
+  pcre_uint32        number;        /* Group number */
+} named_group;
+
+/* Structure for passing "static" information around between the functions
+doing the compiling, so that they are thread-safe. */
+
+typedef struct compile_data {
+  const pcre_uint8 *lcc;            /* Points to lower casing table */
+  const pcre_uint8 *fcc;            /* Points to case-flipping table */
+  const pcre_uint8 *cbits;          /* Points to character type table */
+  const pcre_uint8 *ctypes;         /* Points to table of type maps */
+  const pcre_uchar *start_workspace;/* The start of working space */
+  const pcre_uchar *start_code;     /* The start of the compiled code */
+  const pcre_uchar *start_pattern;  /* The start of the pattern */
+  const pcre_uchar *end_pattern;    /* The end of the pattern */
+  pcre_uchar *hwm;                  /* High watermark of workspace */
+  open_capitem *open_caps;          /* Chain of open capture items */
+  named_group *named_groups;        /* Points to vector in pre-compile */
+  pcre_uchar *name_table;           /* The name/number table */
+  int  names_found;                 /* Number of entries so far */
+  int  name_entry_size;             /* Size of each entry */
+  int  named_group_list_size;       /* Number of entries in the list */
+  int  workspace_size;              /* Size of workspace */
+  unsigned int bracount;            /* Count of capturing parens as we compile */
+  int  final_bracount;              /* Saved value after first pass */
+  int  max_lookbehind;              /* Maximum lookbehind (characters) */
+  int  top_backref;                 /* Maximum back reference */
+  unsigned int backref_map;         /* Bitmap of low back refs */
+  unsigned int namedrefcount;       /* Number of backreferences by name */
+  int  parens_depth;                /* Depth of nested parentheses */
+  int  assert_depth;                /* Depth of nested assertions */
+  pcre_uint32 external_options;     /* External (initial) options */
+  pcre_uint32 external_flags;       /* External flag bits to be set */
+  int  req_varyopt;                 /* "After variable item" flag for reqbyte */
+  BOOL had_accept;                  /* (*ACCEPT) encountered */
+  BOOL had_pruneorskip;             /* (*PRUNE) or (*SKIP) encountered */
+  BOOL check_lookbehind;            /* Lookbehinds need later checking */
+  BOOL dupnames;                    /* Duplicate names exist */
+  BOOL dupgroups;                   /* Duplicate groups exist: (?| found */
+  BOOL iscondassert;                /* Next assert is a condition */
+  int  nltype;                      /* Newline type */
+  int  nllen;                       /* Newline string length */
+  pcre_uchar nl[4];                 /* Newline string when fixed length */
+} compile_data;
+
+/* Structure for maintaining a chain of pointers to the currently incomplete
+branches, for testing for left recursion while compiling. */
+
+typedef struct branch_chain {
+  struct branch_chain *outer;
+  pcre_uchar *current_branch;
+} branch_chain;
+
+/* Structure for mutual recursion detection. */
+
+typedef struct recurse_check {
+  struct recurse_check *prev;
+  const pcre_uchar *group;
+} recurse_check;
+
+/* Structure for items in a linked list that represents an explicit recursive
+call within the pattern; used by pcre_exec(). */
+
+typedef struct recursion_info {
+  struct recursion_info *prevrec; /* Previous recursion record (or NULL) */
+  unsigned int group_num;         /* Number of group that was called */
+  int *offset_save;               /* Pointer to start of saved offsets */
+  int saved_max;                  /* Number of saved offsets */
+  int saved_capture_last;         /* Last capture number */
+  PCRE_PUCHAR subject_position;   /* Position at start of recursion */
+} recursion_info;
+
+/* A similar structure for pcre_dfa_exec(). */
+
+typedef struct dfa_recursion_info {
+  struct dfa_recursion_info *prevrec;
+  int group_num;
+  PCRE_PUCHAR subject_position;
+} dfa_recursion_info;
+
+/* Structure for building a chain of data for holding the values of the subject
+pointer at the start of each subpattern, so as to detect when an empty string
+has been matched by a subpattern - to break infinite loops; used by
+pcre_exec(). */
+
+typedef struct eptrblock {
+  struct eptrblock *epb_prev;
+  PCRE_PUCHAR epb_saved_eptr;
+} eptrblock;
+
+
+/* Structure for passing "static" information around between the functions
+doing traditional NFA matching, so that they are thread-safe. */
+
+typedef struct match_data {
+  unsigned long int match_call_count;      /* As it says */
+  unsigned long int match_limit;           /* As it says */
+  unsigned long int match_limit_recursion; /* As it says */
+  int   *offset_vector;           /* Offset vector */
+  int    offset_end;              /* One past the end */
+  int    offset_max;              /* The maximum usable for return data */
+  int    nltype;                  /* Newline type */
+  int    nllen;                   /* Newline string length */
+  int    name_count;              /* Number of names in name table */
+  int    name_entry_size;         /* Size of entry in names table */
+  unsigned int skip_arg_count;    /* For counting SKIP_ARGs */
+  unsigned int ignore_skip_arg;   /* For re-run when SKIP arg name not found */
+  pcre_uchar *name_table;         /* Table of names */
+  pcre_uchar nl[4];               /* Newline string when fixed */
+  const  pcre_uint8 *lcc;         /* Points to lower casing table */
+  const  pcre_uint8 *fcc;         /* Points to case-flipping table */
+  const  pcre_uint8 *ctypes;      /* Points to table of type maps */
+  BOOL   notbol;                  /* NOTBOL flag */
+  BOOL   noteol;                  /* NOTEOL flag */
+  BOOL   utf;                     /* UTF-8 / UTF-16 flag */
+  BOOL   jscript_compat;          /* JAVASCRIPT_COMPAT flag */
+  BOOL   use_ucp;                 /* PCRE_UCP flag */
+  BOOL   endonly;                 /* Dollar not before final \n */
+  BOOL   notempty;                /* Empty string match not wanted */
+  BOOL   notempty_atstart;        /* Empty string match at start not wanted */
+  BOOL   hitend;                  /* Hit the end of the subject at some point */
+  BOOL   bsr_anycrlf;             /* \R is just any CRLF, not full Unicode */
+  BOOL   hasthen;                 /* Pattern contains (*THEN) */
+  const  pcre_uchar *start_code;  /* For use when recursing */
+  PCRE_PUCHAR start_subject;      /* Start of the subject string */
+  PCRE_PUCHAR end_subject;        /* End of the subject string */
+  PCRE_PUCHAR start_match_ptr;    /* Start of matched string */
+  PCRE_PUCHAR end_match_ptr;      /* Subject position at end match */
+  PCRE_PUCHAR start_used_ptr;     /* Earliest consulted character */
+  int    partial;                 /* PARTIAL options */
+  int    end_offset_top;          /* Highwater mark at end of match */
+  pcre_int32 capture_last;        /* Most recent capture number + overflow flag */
+  int    start_offset;            /* The start offset value */
+  int    match_function_type;     /* Set for certain special calls of MATCH() */
+  eptrblock *eptrchain;           /* Chain of eptrblocks for tail recursions */
+  int    eptrn;                   /* Next free eptrblock */
+  recursion_info *recursive;      /* Linked list of recursion data */
+  void  *callout_data;            /* To pass back to callouts */
+  const  pcre_uchar *mark;        /* Mark pointer to pass back on success */
+  const  pcre_uchar *nomatch_mark;/* Mark pointer to pass back on failure */
+  const  pcre_uchar *once_target; /* Where to back up to for atomic groups */
+#ifdef NO_RECURSE
+  void  *match_frames_base;       /* For remembering malloc'd frames */
+#endif
+} match_data;
+
+/* A similar structure is used for the same purpose by the DFA matching
+functions. */
+
+typedef struct dfa_match_data {
+  const pcre_uchar *start_code;     /* Start of the compiled pattern */
+  const pcre_uchar *start_subject ; /* Start of the subject string */
+  const pcre_uchar *end_subject;    /* End of subject string */
+  const pcre_uchar *start_used_ptr; /* Earliest consulted character */
+  const pcre_uint8 *tables;         /* Character tables */
+  int   start_offset;               /* The start offset value */
+  int   moptions;                   /* Match options */
+  int   poptions;                   /* Pattern options */
+  int   nltype;                     /* Newline type */
+  int   nllen;                      /* Newline string length */
+  pcre_uchar nl[4];                 /* Newline string when fixed */
+  void *callout_data;               /* To pass back to callouts */
+  dfa_recursion_info *recursive;    /* Linked list of recursion data */
+} dfa_match_data;
+
+/* Bit definitions for entries in the pcre_ctypes table. */
+
+#define ctype_space   0x01
+#define ctype_letter  0x02
+#define ctype_digit   0x04
+#define ctype_xdigit  0x08
+#define ctype_word    0x10   /* alphanumeric or '_' */
+#define ctype_meta    0x80   /* regexp meta char or zero (end pattern) */
+
+/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set
+of bits for a class map. Some classes are built by combining these tables. */
+
+#define cbit_space     0      /* [:space:] or \s */
+#define cbit_xdigit   32      /* [:xdigit:] */
+#define cbit_digit    64      /* [:digit:] or \d */
+#define cbit_upper    96      /* [:upper:] */
+#define cbit_lower   128      /* [:lower:] */
+#define cbit_word    160      /* [:word:] or \w */
+#define cbit_graph   192      /* [:graph:] */
+#define cbit_print   224      /* [:print:] */
+#define cbit_punct   256      /* [:punct:] */
+#define cbit_cntrl   288      /* [:cntrl:] */
+#define cbit_length  320      /* Length of the cbits table */
+
+/* Offsets of the various tables from the base tables pointer, and
+total length. */
+
+#define lcc_offset      0
+#define fcc_offset    256
+#define cbits_offset  512
+#define ctypes_offset (cbits_offset + cbit_length)
+#define tables_length (ctypes_offset + 256)
+
+/* Internal function and data prefixes. */
+
+#if defined COMPILE_PCRE8
+#ifndef PUBL
+#define PUBL(name) pcre_##name
+#endif
+#ifndef PRIV
+#define PRIV(name) _pcre_##name
+#endif
+#elif defined COMPILE_PCRE16
+#ifndef PUBL
+#define PUBL(name) pcre16_##name
+#endif
+#ifndef PRIV
+#define PRIV(name) _pcre16_##name
+#endif
+#elif defined COMPILE_PCRE32
+#ifndef PUBL
+#define PUBL(name) pcre32_##name
+#endif
+#ifndef PRIV
+#define PRIV(name) _pcre32_##name
+#endif
+#else
+#error Unsupported compiling mode
+#endif /* COMPILE_PCRE[8|16|32] */
+
+/* Layout of the UCP type table that translates property names into types and
+codes. Each entry used to point directly to a name, but to reduce the number of
+relocations in shared libraries, it now has an offset into a single string
+instead. */
+
+typedef struct {
+  pcre_uint16 name_offset;
+  pcre_uint16 type;
+  pcre_uint16 value;
+} ucp_type_table;
+
+
+/* Internal shared data tables. These are tables that are used by more than one
+of the exported public functions. They have to be "external" in the C sense,
+but are not part of the PCRE public API. The data for these tables is in the
+pcre_tables.c module. */
+
+#ifdef COMPILE_PCRE8
+extern const int            PRIV(utf8_table1)[];
+extern const int            PRIV(utf8_table1_size);
+extern const int            PRIV(utf8_table2)[];
+extern const int            PRIV(utf8_table3)[];
+extern const pcre_uint8     PRIV(utf8_table4)[];
+#endif /* COMPILE_PCRE8 */
+
+extern const char           PRIV(utt_names)[];
+extern const ucp_type_table PRIV(utt)[];
+extern const int            PRIV(utt_size);
+
+extern const pcre_uint8     PRIV(OP_lengths)[];
+extern const pcre_uint8     PRIV(default_tables)[];
+
+extern const pcre_uint32    PRIV(hspace_list)[];
+extern const pcre_uint32    PRIV(vspace_list)[];
+
+
+/* Internal shared functions. These are functions that are used by more than
+one of the exported public functions. They have to be "external" in the C
+sense, but are not part of the PCRE public API. */
+
+/* String comparison functions. */
+#if defined COMPILE_PCRE8
+
+#define STRCMP_UC_UC(str1, str2) \
+  strcmp((char *)(str1), (char *)(str2))
+#define STRCMP_UC_C8(str1, str2) \
+  strcmp((char *)(str1), (str2))
+#define STRNCMP_UC_UC(str1, str2, num) \
+  strncmp((char *)(str1), (char *)(str2), (num))
+#define STRNCMP_UC_C8(str1, str2, num) \
+  strncmp((char *)(str1), (str2), (num))
+#define STRLEN_UC(str) strlen((const char *)str)
+
+#elif defined COMPILE_PCRE16 || defined COMPILE_PCRE32
+
+extern int               PRIV(strcmp_uc_uc)(const pcre_uchar *,
+                           const pcre_uchar *);
+extern int               PRIV(strcmp_uc_c8)(const pcre_uchar *,
+                           const char *);
+extern int               PRIV(strncmp_uc_uc)(const pcre_uchar *,
+                           const pcre_uchar *, unsigned int num);
+extern int               PRIV(strncmp_uc_c8)(const pcre_uchar *,
+                           const char *, unsigned int num);
+extern unsigned int      PRIV(strlen_uc)(const pcre_uchar *str);
+
+#define STRCMP_UC_UC(str1, str2) \
+  PRIV(strcmp_uc_uc)((str1), (str2))
+#define STRCMP_UC_C8(str1, str2) \
+  PRIV(strcmp_uc_c8)((str1), (str2))
+#define STRNCMP_UC_UC(str1, str2, num) \
+  PRIV(strncmp_uc_uc)((str1), (str2), (num))
+#define STRNCMP_UC_C8(str1, str2, num) \
+  PRIV(strncmp_uc_c8)((str1), (str2), (num))
+#define STRLEN_UC(str) PRIV(strlen_uc)(str)
+
+#endif /* COMPILE_PCRE[8|16|32] */
+
+#if defined COMPILE_PCRE8 || defined COMPILE_PCRE16
+
+#define STRCMP_UC_UC_TEST(str1, str2) STRCMP_UC_UC(str1, str2)
+#define STRCMP_UC_C8_TEST(str1, str2) STRCMP_UC_C8(str1, str2)
+
+#elif defined COMPILE_PCRE32
+
+extern int               PRIV(strcmp_uc_uc_utf)(const pcre_uchar *,
+                           const pcre_uchar *);
+extern int               PRIV(strcmp_uc_c8_utf)(const pcre_uchar *,
+                           const char *);
+
+#define STRCMP_UC_UC_TEST(str1, str2) \
+  (utf ? PRIV(strcmp_uc_uc_utf)((str1), (str2)) : PRIV(strcmp_uc_uc)((str1), (str2)))
+#define STRCMP_UC_C8_TEST(str1, str2) \
+  (utf ? PRIV(strcmp_uc_c8_utf)((str1), (str2)) : PRIV(strcmp_uc_c8)((str1), (str2)))
+
+#endif /* COMPILE_PCRE[8|16|32] */
+
+extern const pcre_uchar *PRIV(find_bracket)(const pcre_uchar *, BOOL, int);
+extern BOOL              PRIV(is_newline)(PCRE_PUCHAR, int, PCRE_PUCHAR,
+                           int *, BOOL);
+extern unsigned int      PRIV(ord2utf)(pcre_uint32, pcre_uchar *);
+extern int               PRIV(valid_utf)(PCRE_PUCHAR, int, int *);
+extern BOOL              PRIV(was_newline)(PCRE_PUCHAR, int, PCRE_PUCHAR,
+                           int *, BOOL);
+extern BOOL              PRIV(xclass)(pcre_uint32, const pcre_uchar *, BOOL);
+
+#ifdef SUPPORT_JIT
+extern void              PRIV(jit_compile)(const REAL_PCRE *,
+                           PUBL(extra) *, int);
+extern int               PRIV(jit_exec)(const PUBL(extra) *,
+                           const pcre_uchar *, int, int, int, int *, int);
+extern void              PRIV(jit_free)(void *);
+extern int               PRIV(jit_get_size)(void *);
+extern const char*       PRIV(jit_get_target)(void);
+#endif
+
+/* Unicode character database (UCD) */
+
+typedef struct {
+  pcre_uint8 script;     /* ucp_Arabic, etc. */
+  pcre_uint8 chartype;   /* ucp_Cc, etc. (general categories) */
+  pcre_uint8 gbprop;     /* ucp_gbControl, etc. (grapheme break property) */
+  pcre_uint8 caseset;    /* offset to multichar other cases or zero */
+  pcre_int32 other_case; /* offset to other case, or zero if none */
+} ucd_record;
+
+extern const pcre_uint32 PRIV(ucd_caseless_sets)[];
+extern const ucd_record  PRIV(ucd_records)[];
+extern const pcre_uint8  PRIV(ucd_stage1)[];
+extern const pcre_uint16 PRIV(ucd_stage2)[];
+extern const pcre_uint32 PRIV(ucp_gentype)[];
+extern const pcre_uint32 PRIV(ucp_gbtable)[];
+#ifdef COMPILE_PCRE32
+extern const ucd_record  PRIV(dummy_ucd_record)[];
+#endif
+#ifdef SUPPORT_JIT
+extern const int         PRIV(ucp_typerange)[];
+#endif
+
+#ifdef SUPPORT_UCP
+/* UCD access macros */
+
+#define UCD_BLOCK_SIZE 128
+#define REAL_GET_UCD(ch) (PRIV(ucd_records) + \
+        PRIV(ucd_stage2)[PRIV(ucd_stage1)[(int)(ch) / UCD_BLOCK_SIZE] * \
+        UCD_BLOCK_SIZE + (int)(ch) % UCD_BLOCK_SIZE])
+
+#ifdef COMPILE_PCRE32
+#define GET_UCD(ch) ((ch > 0x10ffff)? PRIV(dummy_ucd_record) : REAL_GET_UCD(ch))
+#else
+#define GET_UCD(ch) REAL_GET_UCD(ch)
+#endif
+
+#define UCD_CHARTYPE(ch)    GET_UCD(ch)->chartype
+#define UCD_SCRIPT(ch)      GET_UCD(ch)->script
+#define UCD_CATEGORY(ch)    PRIV(ucp_gentype)[UCD_CHARTYPE(ch)]
+#define UCD_GRAPHBREAK(ch)  GET_UCD(ch)->gbprop
+#define UCD_CASESET(ch)     GET_UCD(ch)->caseset
+#define UCD_OTHERCASE(ch)   ((pcre_uint32)((int)ch + (int)(GET_UCD(ch)->other_case)))
+
+#endif /* SUPPORT_UCP */
+
+#endif
+
+/* End of pcre_internal.h */