rubyjobbuilderdsl 0.0.2 → 0.0.3

data/vendor/bundle/ruby/2.1.0/gems/rake-0.9.6/doc/release_notes/rake-0.7.3.rdoc

@@ -1,47 +0,0 @@
-= Rake 0.7.3 Released
-
-Rake version 0.7.3 is a minor release that includes some refactoring to better
-support custom Rake applications.
-
-== Changes
-
-=== New Features in Version 0.7.3
-
-* Added the +init+ and +top_level+ methods to make the creation of custom Rake applications a bit easier.  E.g.
-
-    gem 'rake', ">= 0.7.3"
-    require 'rake'
-
-    Rake.application.init('myrake')
-
-    task :default do
-      something_interesting
-    end
-
-    Rake.application.top_level
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But instead of
-cryptic make recipes, Rake uses standard Ruby code to declare tasks and
-dependencies. You have the full power of a modern scripting language built
-right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments. Thanks to ...
-
--- Jim Weirich

data/vendor/bundle/ruby/2.1.0/gems/rake-0.9.6/doc/release_notes/rake-0.8.0.rdoc

@@ -1,114 +0,0 @@
-= Rake 0.8.0/0.8.1 Released
-
-Rake version 0.8.0 is a new release of rake that includes serveral new
-features.
-
-== Changes
-
-=== New Features in Version 0.8.0
-
-* Tasks can now receive command line parameters.  See the examples
-  below for more details.
-
-* Comments are limited to 80 columns on output, but full comments can
-  be seen by using the -D parameter. (feature suggested by Jamis
-  Buck).
-
-* Explicit exit(n) calls will now set the exit status to n. (patch
-  provided by Stephen Touset).
-
-* Rake is now compatible with Ruby 1.9.
-
-Version 0.8.1 is a minor update that includes additional Ruby 1.9
-compatibility fixes.
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-
-== Task Argument Examples
-
-Prior to version 0.8.0, rake was only able to handle command line
-arguments of the form NAME=VALUE that were passed into Rake via the
-ENV hash.  Many folks had asked for some kind of simple command line
-arguments, perhaps using "--" to separate regular task names from
-argument values on the command line.  The problem is that there was no
-easy way to associate positional arguments on the command line with
-different tasks.  Suppose both tasks :a and :b expect a command line
-argument: does the first value go with :a?  What if :b is run first?
-Should it then get the first command line argument.
-
-Rake 0.8.0 solves this problem by explicitly passing values directly
-to the tasks that need them.  For example, if I had a release task
-that required a version number, I could say:
-
-   rake release[0.8.0]
-
-And the string "0.8.0" will be passed to the :release task.  Multiple
-arguments can be passed by separating them with a comma, for example:
-
-   rake name[john,doe]
-
-Just a few words of caution.  The rake task name and its arguments
-need to be a single command line argument to rake.  This generally
-means no spaces.  If spaces are needed, then the entire rake +
-argument string should be quoted.  Something like this:
-
-   rake "name[billy bob, smith]"
-
-(Quoting rules vary between operating systems and shells, so make sure
-you consult the proper docs for your OS/shell).
-
-=== Tasks that Expect Parameters
-
-Parameters are only given to tasks that are setup to expect them.  In
-order to handle named parameters, the task declaration syntax for
-tasks has been extended slightly.
-
-For example, a task that needs a first name and last name might be
-declared as:
-
-   task :name, :first_name, :last_name
-
-The first argument is still the name of the task (:name in this case).
-The next to argumements are the names of the parameters expected by
-:name (:first_name and :last_name in the example).
-
-To access the values of the paramters, the block defining the task
-behaviour can now accept a second parameter:
-
-   task :name, :first_name, :last_name do |t, args|
-     puts "First name is #{args.first_name}"
-     puts "Last  name is #{args.last_name}"
-   end
-
-The first argument of the block "t" is always bound to the current
-task object.  The second argument "args" is an open-struct like object
-that allows access to the task arguments.  Extra command line
-arguments to a task are ignored.  Missing command line arguments are
-given the nil value.
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* Jamis Buck (for comment formatting suggestions)
-* Stephen Touset (for exit status patch).
-
--- Jim Weirich

data/vendor/bundle/ruby/2.1.0/gems/rake-0.9.6/doc/release_notes/rake-0.8.2.rdoc

@@ -1,165 +0,0 @@
-= Rake 0.8.2 Released
-
-Rake version 0.8.2 is a new release of rake that includes a number of
-new features and numerous bug fixes.
-
-== Changes
-
-=== New Features in Version 0.8.2
-
-* Switched from getoptlong to optparse (patches supplied by Edwin
-  Pratomo).
-
-* The -T option will now attempt to dynamically sense the size of the
-  terminal. The -T output will only self-truncate if the output is a
-  tty. However, if RAKE_COLUMNS is explicitly set, it will be honored
-  in any case. (Patch provided by Gavin Stark).
-
-* The following public methods have been added to rake task objects:
-
-  * task.clear -- Clear both the prerequisites and actions of the
-    target rake task.
-  * task.clear_prerequisites -- Clear all the existing prerequisites
-    from the target rake task.
-  * task.clear_actions -- Clear all the existing actions from the
-    target rake task.
-  * task.reenable -- Re-enable a task, allowing its actions to be
-    executed again if the task is invoked.
-
-* Changed RDoc test task to have no default template. This makes it
-  easier for the tempate to pick up the template from the environment.
-
-* Default values for task arguments can easily be specified with the
-  :with_defaults method. (Idea for default argument merging supplied
-  by (Adam Q. Salter)
-
-=== Bug Fixes in Version 0.8.2
-
-* Fixed bug in package task so that it will include the subdir
-  directory in the package for testing. (Bug found by Adam Majer)
-
-* Fixed filename dependency order bug in test_inspect_pending and
-  test_to_s_pending. (Bug found by Adam Majer)
-
-* Fixed check for file utils options to make them immune to the
-  symbol/string differences. (Patch supplied by Edwin Pratomo)
-
-* Fixed bug with rules involving multiple source, where only the first
-  dependency of a rule has any effect (Patch supplied by Emanuel
-  Indermühle)
-
-* FileList#clone and FileList#dup have better sematics w.r.t. taint
-  and freeze.
-
-* Changed from using Mutex to Monitor. Evidently Mutex causes thread
-  join errors when Ruby is compiled with -disable-pthreads. (Patch
-  supplied by Ittay Dror)
-
-* Fixed bug in makefile parser that had problems with extra spaces in
-  file task names. (Patch supplied by Ittay Dror)
-
-== Other changes in Version 0.8.2
-
-* Added ENV var to rake's own Rakefile to prevent OS X from including
-  extended attribute junk in the rake package tar file. (Bug found by
-  Adam Majer)
-
-* Added a performance patch for reading large makefile dependency
-  files. (Patch supplied by Ittay Dror)
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-
-== Task Argument Examples
-
-Prior to version 0.8.0, rake was only able to handle command line
-arguments of the form NAME=VALUE that were passed into Rake via the
-ENV hash.  Many folks had asked for some kind of simple command line
-arguments, perhaps using "--" to separate regular task names from
-argument values on the command line.  The problem is that there was no
-easy way to associate positional arguments on the command line with
-different tasks.  Suppose both tasks :a and :b expect a command line
-argument: does the first value go with :a?  What if :b is run first?
-Should it then get the first command line argument.
-
-Rake 0.8.0 solves this problem by explicitly passing values directly
-to the tasks that need them.  For example, if I had a release task
-that required a version number, I could say:
-
-   rake release[0.8.2]
-
-And the string "0.8.2" will be passed to the :release task.  Multiple
-arguments can be passed by separating them with a comma, for example:
-
-   rake name[john,doe]
-
-Just a few words of caution.  The rake task name and its arguments
-need to be a single command line argument to rake.  This generally
-means no spaces.  If spaces are needed, then the entire rake +
-argument string should be quoted.  Something like this:
-
-   rake "name[billy bob, smith]"
-
-(Quoting rules vary between operating systems and shells, so make sure
-you consult the proper docs for your OS/shell).
-
-=== Tasks that Expect Parameters
-
-Parameters are only given to tasks that are setup to expect them.  In
-order to handle named parameters, the task declaration syntax for
-tasks has been extended slightly.
-
-For example, a task that needs a first name and last name might be
-declared as:
-
-   task :name, :first_name, :last_name
-
-The first argument is still the name of the task (:name in this case).
-The next to argumements are the names of the parameters expected by
-:name (:first_name and :last_name in the example).
-
-To access the values of the paramters, the block defining the task
-behaviour can now accept a second parameter:
-
-   task :name, :first_name, :last_name do |t, args|
-     puts "First name is #{args.first_name}"
-     puts "Last  name is #{args.last_name}"
-   end
-
-The first argument of the block "t" is always bound to the current
-task object.  The second argument "args" is an open-struct like object
-that allows access to the task arguments.  Extra command line
-arguments to a task are ignored.  Missing command line arguments are
-given the nil value.
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* Edwin Pratomo
-* Gavin Stark
-* Adam Q. Salter
-* Adam Majer
-* Emanuel Indermühle
-* Ittay Dror
-* Bheeshmar Redheendran (for spending an afternoon with me debugging
-  windows issues)
-
--- Jim Weirich

data/vendor/bundle/ruby/2.1.0/gems/rake-0.9.6/doc/release_notes/rake-0.8.3.rdoc

@@ -1,112 +0,0 @@
-= Rake 0.8.3 Released
-
-Rake version 0.8.3 is a bug-fix release of rake.
-
-== Changes
-
-=== Bug Fixes in Version 0.8.3
-
-* Enhanced the system directory detection in windows. We now check
-  HOMEDRIVE/HOMEPATH and USERPROFILE if APPDATA isn't found. (Patch
-  supplied by James Tucker). Rake no long aborts if it can't find the
-  directory.
-
-* Added fix to handle ruby installations in directories with spaces in
-  their name.
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-
-== Task Argument Examples
-
-Prior to version 0.8.0, rake was only able to handle command line
-arguments of the form NAME=VALUE that were passed into Rake via the
-ENV hash.  Many folks had asked for some kind of simple command line
-arguments, perhaps using "--" to separate regular task names from
-argument values on the command line.  The problem is that there was no
-easy way to associate positional arguments on the command line with
-different tasks.  Suppose both tasks :a and :b expect a command line
-argument: does the first value go with :a?  What if :b is run first?
-Should it then get the first command line argument.
-
-Rake 0.8.0 solves this problem by explicitly passing values directly
-to the tasks that need them.  For example, if I had a release task
-that required a version number, I could say:
-
-   rake release[0.8.3]
-
-And the string "0.8.3" will be passed to the :release task.  Multiple
-arguments can be passed by separating them with a comma, for example:
-
-   rake name[john,doe]
-
-Just a few words of caution.  The rake task name and its arguments
-need to be a single command line argument to rake.  This generally
-means no spaces.  If spaces are needed, then the entire rake +
-argument string should be quoted.  Something like this:
-
-   rake "name[billy bob, smith]"
-
-(Quoting rules vary between operating systems and shells, so make sure
-you consult the proper docs for your OS/shell).
-
-=== Tasks that Expect Parameters
-
-Parameters are only given to tasks that are setup to expect them.  In
-order to handle named parameters, the task declaration syntax for
-tasks has been extended slightly.
-
-For example, a task that needs a first name and last name might be
-declared as:
-
-   task :name, :first_name, :last_name
-
-The first argument is still the name of the task (:name in this case).
-The next to argumements are the names of the parameters expected by
-:name (:first_name and :last_name in the example).
-
-To access the values of the paramters, the block defining the task
-behaviour can now accept a second parameter:
-
-   task :name, :first_name, :last_name do |t, args|
-     puts "First name is #{args.first_name}"
-     puts "Last  name is #{args.last_name}"
-   end
-
-The first argument of the block "t" is always bound to the current
-task object.  The second argument "args" is an open-struct like object
-that allows access to the task arguments.  Extra command line
-arguments to a task are ignored.  Missing command line arguments are
-given the nil value.
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* Edwin Pratomo
-* Gavin Stark
-* Adam Q. Salter
-* Adam Majer
-* Emanuel Indermühle
-* Ittay Dror
-* Bheeshmar Redheendran (for spending an afternoon with me debugging
-  windows issues)
-
--- Jim Weirich

data/vendor/bundle/ruby/2.1.0/gems/rake-0.9.6/doc/release_notes/rake-0.8.4.rdoc

@@ -1,147 +0,0 @@
-= Rake 0.8.4 Released
-
-Rake version 0.8.4 is a bug-fix release of rake.
-
-NOTE: The version of Rake that comes with Ruby 1.9 has diverged
-      slightly from the core Rake code base.  Rake 0.8.4 will work
-      with Ruby 1.9, but is not a strict upgrade for the Rake that
-      comes with Ruby 1.9.  A (near) future release of Rake will unify
-      those two codebases.
-
-== Letter Writing Campaign
-
-Thanks to Aaron Patterson (@tenderlove) and Eric Hodel (@drbrain) for
-their encouraging support in organizing a letter writing campaign to
-lobby for the "Warning Free" release of rake 0.8.4.  A special callout
-goes to Jonathan D. Lord, Sr (Dr. Wingnut) whose postcard was the
-first to actually reach me. (see
-http://tenderlovemaking.com/2009/02/26/we-need-a-new-version-of-rake/
-for details)
-
-== Changes
-
-=== New Features / Enhancements in Version 0.8.4
-
-* Case is preserved on rakefile names. (patch from James
-  M. Lawrence/quix)
-
-* Improved Rakefile case insensitivity testing (patch from Luis
-  Lavena).
-
-* Windows system dir search order is now: HOME, HOMEDRIVE + HOMEPATH,
-  APPDATA, USERPROFILE (patch from Luis Lavena)
-
-* MingGW is now recognized as a windows platform.  (patch from Luis
-  Lavena)
-
-=== Bug Fixes in Version 0.8.4
-
-* Removed reference to manage_gem to fix the warning produced by the
-  gem package task.
-
-* Fixed stray ARGV option problem that was interfering with
-  Test::Unit::Runner. (patch from Pivotal Labs)
-
-=== Infrastructure Improvements in Version 0.8.4
-
-* Numerous fixes to the windows test suite (patch from Luis Lavena).
-
-* Improved Rakefile case insensitivity testing (patch from Luis
-  Lavena).
-
-* Better support for windows paths in the test task (patch from Simon
-  Chiang/bahuvrihi)
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Task Argument Examples
-
-Prior to version 0.8.0, rake was only able to handle command line
-arguments of the form NAME=VALUE that were passed into Rake via the
-ENV hash.  Many folks had asked for some kind of simple command line
-arguments, perhaps using "--" to separate regular task names from
-argument values on the command line.  The problem is that there was no
-easy way to associate positional arguments on the command line with
-different tasks.  Suppose both tasks :a and :b expect a command line
-argument: does the first value go with :a?  What if :b is run first?
-Should it then get the first command line argument.
-
-Rake 0.8.0 solves this problem by explicitly passing values directly
-to the tasks that need them.  For example, if I had a release task
-that required a version number, I could say:
-
-   rake release[0.8.4]
-
-And the string "0.8.4" will be passed to the :release task.  Multiple
-arguments can be passed by separating them with a comma, for example:
-
-   rake name[john,doe]
-
-Just a few words of caution.  The rake task name and its arguments
-need to be a single command line argument to rake.  This generally
-means no spaces.  If spaces are needed, then the entire rake +
-argument string should be quoted.  Something like this:
-
-   rake "name[billy bob, smith]"
-
-(Quoting rules vary between operating systems and shells, so make sure
-you consult the proper docs for your OS/shell).
-
-=== Tasks that Expect Parameters
-
-Parameters are only given to tasks that are setup to expect them.  In
-order to handle named parameters, the task declaration syntax for
-tasks has been extended slightly.
-
-For example, a task that needs a first name and last name might be
-declared as:
-
-   task :name, :first_name, :last_name
-
-The first argument is still the name of the task (:name in this case).
-The next to argumements are the names of the parameters expected by
-:name (:first_name and :last_name in the example).
-
-To access the values of the paramters, the block defining the task
-behaviour can now accept a second parameter:
-
-   task :name, :first_name, :last_name do |t, args|
-     puts "First name is #{args.first_name}"
-     puts "Last  name is #{args.last_name}"
-   end
-
-The first argument of the block "t" is always bound to the current
-task object.  The second argument "args" is an open-struct like object
-that allows access to the task arguments.  Extra command line
-arguments to a task are ignored.  Missing command line arguments are
-given the nil value.
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence/quix
-* Luis Lavena
-* Pivotal Labs
-* Simon Chiang/bahuvrihi
-
--- Jim Weirich

data/vendor/bundle/ruby/2.1.0/gems/rake-0.9.6/doc/release_notes/rake-0.8.5.rdoc

@@ -1,53 +0,0 @@
-= Rake 0.8.5 Released
-
-Rake version 0.8.5 is a new release of Rake with greatly improved
-support for executing commands on Windows.  The "sh" command now has
-the same semantics on Windows that it has on Unix based platforms.
-
-== Changes
-
-=== New Features / Enhancements in Version 0.8.5
-
-* Improved implementation of the Rake system command for Windows.
-  (patch from James M. Lawrence/quix)
-
-* Support for Ruby 1.9's improved system command.  (patch from James
-  M. Lawrence/quix)
-
-* Rake now includes the configured extension when invoking an
-  executable (Config::CONFIG['EXEEXT])
-
-=== Bug Fixes in Version 0.8.5
-
-* Environment variable keys are now correctly cased (it matters in
-  some implementations).
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence/quix
-* Luis Lavena
-
--- Jim Weirich

data/vendor/bundle/ruby/2.1.0/gems/rake-0.9.6/doc/release_notes/rake-0.8.6.rdoc

@@ -1,55 +0,0 @@
-= Rake 0.8.6 Released
-
-Rake version 0.8.5 introduced greatly improved support for executing
-commands on Windows.  The "sh" command now has the same semantics on
-Windows that it has on Unix based platforms.
-
-Rake version 0.8.6 includes minor fixes the the RDoc generation.
-
-== Changes
-
-=== New Features / Enhancements in Version 0.8.5
-
-* Improved implementation of the Rake system command for Windows.
-  (patch from James M. Lawrence/quix)
-
-* Support for Ruby 1.9's improved system command.  (patch from James
-  M. Lawrence/quix)
-
-* Rake now includes the configured extension when invoking an
-  executable (Config::CONFIG['EXEEXT])
-
-=== Bug Fixes in Version 0.8.5
-
-* Environment variable keys are now correctly cased (it matters in
-  some implementations).
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence/quix
-* Luis Lavena
-
--- Jim Weirich