rubygems-update 3.1.4 → 3.2.1

data/bundler/{man/bundle-config.ronn → lib/bundler/man/bundle-config.1.ronn}

@@ -11,7 +11,7 @@ This command allows you to interact with Bundler's configuration system.
 
 Bundler loads configuration settings in this order:
 
-1. Local config (`app/.bundle/config`)
+1. Local config (`<project_root>/.bundle/config` or `$BUNDLE_APP_CONFIG/config`)
 2. Environmental variables (`ENV`)
 3. Global config (`~/.bundle/config`)
 4. Bundler default config
@@ -30,8 +30,10 @@ overridden and user will be warned.
 
 Executing `bundle config set --global <name> <value>` works the same as above.
 
-Executing `bundle config set --local <name> <value>` will set that configuration to
-the local application. The configuration will be stored in `app/.bundle/config`.
+Executing `bundle config set --local <name> <value>` will set that configuration
+in the directory for the local application. The configuration will be stored in
+`<project_root>/.bundle/config`. If `BUNDLE_APP_CONFIG` is set, the configuration
+will be stored in `$BUNDLE_APP_CONFIG/config`.
 
 Executing `bundle config unset <name>` will delete the configuration in both
 local and global sources.
@@ -45,7 +47,7 @@ configuration only from the local application.
 Executing bundle with the `BUNDLE_IGNORE_CONFIG` environment variable set will
 cause it to ignore all configuration.
 
-Executing `bundle config set disable_multisource true` upgrades the warning about
+Executing `bundle config set --local disable_multisource true` upgrades the warning about
 the Gemfile containing multiple primary sources to an error. Executing `bundle
 config unset disable_multisource` downgrades this error to a warning.
 
@@ -57,7 +59,7 @@ application's configuration (normally, `./.bundle/config`).
 
 However, this will be changed in bundler 3, so it's better not to rely on this
 behavior. If these options must be remembered, it's better to set them using
-`bundle config` (e.g., `bundle config set path foo`).
+`bundle config` (e.g., `bundle config set --local path foo`).
 
 The options that can be configured are:
 
@@ -101,7 +103,7 @@ pass configuration flags to `gem install` to specify where to find the
 Since the specific location of that executable can change from machine
 to machine, you can specify these flags on a per-machine basis.
 
-    bundle config set build.mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config
+    bundle config set --global build.mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config
 
 After running this command, every time bundler needs to install the
 `mysql` gem, it will pass along the flags you specified.
@@ -148,7 +150,8 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
    Install executables from gems in the bundle to the specified directory.
    Defaults to `false`.
 * `cache_all` (`BUNDLE_CACHE_ALL`):
-   Cache all gems, including path and git gems.
+   Cache all gems, including path and git gems. This needs to be explicitly
+   configured on bundler 1 and bundler 2, but will be the default on bundler 3.
 * `cache_all_platforms` (`BUNDLE_CACHE_ALL_PLATFORMS`):
    Cache gems for all platforms.
 * `cache_path` (`BUNDLE_CACHE_PATH`):
@@ -179,8 +182,6 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
    When set, Gemfiles containing multiple sources will produce errors
    instead of warnings.
    Use `bundle config unset disable_multisource` to unset.
-* `disable_platform_warnings` (`BUNDLE_DISABLE_PLATFORM_WARNINGS`):
-   Disable warnings during bundle install when a dependency is unused on the current platform.
 * `disable_shared_gems` (`BUNDLE_DISABLE_SHARED_GEMS`):
    Stop Bundler from accessing gems installed to RubyGems' normal location.
 * `disable_version_check` (`BUNDLE_DISABLE_VERSION_CHECK`):
@@ -249,17 +250,6 @@ learn more about their operation in [bundle install(1)](bundle-install.1.html).
    be changed in the next major version.
 * `silence_root_warning` (`BUNDLE_SILENCE_ROOT_WARNING`):
    Silence the warning Bundler prints when installing gems as root.
-* `skip_default_git_sources` (`BUNDLE_SKIP_DEFAULT_GIT_SOURCES`):
-   Whether Bundler should skip adding default git source shortcuts to the
-   Gemfile DSL.
-* `specific_platform` (`BUNDLE_SPECIFIC_PLATFORM`):
-   Allow bundler to resolve for the specific running platform and store it in
-   the lockfile, instead of only using a generic platform.
-   A specific platform is the exact platform triple reported by
-   `Gem::Platform.local`, such as `x86_64-darwin-16` or `universal-java-1.8`.
-   On the other hand, generic platforms are those such as `ruby`, `mswin`, or
-   `java`. In this example, `x86_64-darwin-16` would map to `ruby` and
-   `universal-java-1.8` to `java`.
 * `ssl_ca_cert` (`BUNDLE_SSL_CA_CERT`):
    Path to a designated CA certificate file or folder containing multiple
    certificates for trusted CAs in PEM format.
@@ -302,11 +292,11 @@ Bundler also allows you to work against a git repository locally
 instead of using the remote version. This can be achieved by setting
 up a local override:
 
-    bundle config set local.GEM_NAME /path/to/local/git/repository
+    bundle config set --local local.GEM_NAME /path/to/local/git/repository
 
 For example, in order to use a local Rack repository, a developer could call:
 
-    bundle config set local.rack ~/Work/git/rack
+    bundle config set --local local.rack ~/Work/git/rack
 
 Now instead of checking out the remote git repository, the local
 override will be used. Similar to a path source, every time the local
@@ -336,21 +326,21 @@ Bundler supports overriding gem sources with mirrors. This allows you to
 configure rubygems.org as the gem source in your Gemfile while still using your
 mirror to fetch gems.
 
-    bundle config set mirror.SOURCE_URL MIRROR_URL
+    bundle config set --global mirror.SOURCE_URL MIRROR_URL
 
 For example, to use a mirror of rubygems.org hosted at rubygems-mirror.org:
 
-    bundle config set mirror.http://rubygems.org http://rubygems-mirror.org
+    bundle config set --global mirror.http://rubygems.org http://rubygems-mirror.org
 
 Each mirror also provides a fallback timeout setting. If the mirror does not
 respond within the fallback timeout, Bundler will try to use the original
 server instead of the mirror.
 
-    bundle config set mirror.SOURCE_URL.fallback_timeout TIMEOUT
+    bundle config set --global mirror.SOURCE_URL.fallback_timeout TIMEOUT
 
 For example, to fall back to rubygems.org after 3 seconds:
 
-    bundle config set mirror.https://rubygems.org.fallback_timeout 3
+    bundle config set --global mirror.https://rubygems.org.fallback_timeout 3
 
 The default fallback timeout is 0.1 seconds, but the setting can currently
 only accept whole seconds (for example, 1, 15, or 30).
@@ -360,12 +350,12 @@ only accept whole seconds (for example, 1, 15, or 30).
 Bundler allows you to configure credentials for any gem source, which allows
 you to avoid putting secrets into your Gemfile.
 
-    bundle config set SOURCE_HOSTNAME USERNAME:PASSWORD
+    bundle config set --global SOURCE_HOSTNAME USERNAME:PASSWORD
 
 For example, to save the credentials of user `claudette` for the gem source at
 `gems.longerous.com`, you would run:
 
-    bundle config set gems.longerous.com claudette:s00pers3krit
+    bundle config set --global gems.longerous.com claudette:s00pers3krit
 
 Or you can set the credentials as an environment variable like this:
 
@@ -373,7 +363,7 @@ Or you can set the credentials as an environment variable like this:
 
 For gems with a git source with HTTP(S) URL you can specify credentials like so:
 
-    bundle config set https://github.com/bundler/bundler.git username:password
+    bundle config set --global https://github.com/rubygems/rubygems.git username:password
 
 Or you can set the credentials as an environment variable like so:
 
@@ -396,4 +386,3 @@ outlines the available environment variables and their default values
     BUNDLE_USER_CACHE : $BUNDLE_USER_HOME/cache
     BUNDLE_USER_CONFIG : $BUNDLE_USER_HOME/config
     BUNDLE_USER_PLUGIN : $BUNDLE_USER_HOME/plugin
-

data/bundler/{man/bundle-gem.ronn → lib/bundler/man/bundle-gem.1.ronn}

@@ -60,14 +60,37 @@ configuration file using the following names:
   Do not create a `LICENSE.txt` (overrides `--mit` specified in the global
   config).
 
-* `-t`, `--test=minitest`, `--test=rspec`:
+* `-t`, `--test=minitest`, `--test=rspec`, `--test=test-unit`:
   Specify the test framework that Bundler should use when generating the
-  project. Acceptable values are `minitest` and `rspec`. The `GEM_NAME.gemspec`
-  will be configured and a skeleton test/spec directory will be created based
-  on this option. If this option is unspecified, an interactive prompt will be
-  displayed and the answer will be saved in Bundler's global config for future
-  `bundle gem` use.
-  If no option is specified, the default testing framework is RSpec.
+  project. Acceptable values are `minitest`, `rspec` and `test-unit`. The
+  `GEM_NAME.gemspec` will be configured and a skeleton test/spec directory will
+  be created based on this option. Given no option is specified:
+
+  When Bundler is configured to generate tests, this defaults to Bundler's
+  global config setting `gem.test`.
+
+  When Bundler is configured to not generate tests, an interactive prompt will
+  be displayed and the answer will be used for the current rubygem project.
+
+  When Bundler is unconfigured, an interactive prompt will be displayed and
+  the answer will be saved in Bundler's global config for future `bundle gem`
+  use.
+
+* `--ci`, `--ci=github`, `--ci=travis`, `--ci=gitlab`, `--ci=circle`:
+  Specify the continuous integration service that Bundler should use when
+  generating the project. Acceptable values are `github`, `travis`, `gitlab`
+  and `circle`. A configuration file will be generated in the project directory.
+  Given no option is specified:
+
+  When Bundler is configured to generate CI files, this defaults to Bundler's
+  global config setting `gem.ci`.
+
+  When Bundler is configured to not generate CI files, an interactive prompt
+  will be displayed and the answer will be used for the current rubygem project.
+
+  When Bundler is unconfigured, an interactive prompt will be displayed and
+  the answer will be saved in Bundler's global config for future `bundle gem`
+  use.
 
 * `-e`, `--edit[=EDITOR]`:
   Open the resulting GEM_NAME.gemspec in EDITOR, or the default editor if not

data/bundler/{man/bundle-install.ronn → lib/bundler/man/bundle-install.1.ronn}

@@ -43,8 +43,12 @@ update process below under [CONSERVATIVE UPDATING][].
 
 ## OPTIONS
 
-To apply any of `--binstubs`, `--deployment`, `--path`, or `--without` every
-time `bundle install` is run, use `bundle config` (see bundle-config(1)).
+The `--clean`, `--deployment`, `--frozen`, `--no-prune`, `--path`, `--shebang`,
+`--system`, `--without` and `--with` options are deprecated because they only
+make sense if they are applied to every subsequent `bundle install` run
+automatically and that requires `bundler` to silently remember them. Since
+`bundler` will no longer remember CLI flags in future versions, `bundle config`
+(see bundle-config(1)) should be used to apply them permanently.
 
 * `--binstubs[=<directory>]`:
   Binstubs are scripts that wrap around executables. Bundler creates a small Ruby
@@ -64,11 +68,15 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
   in the current Gemfile(5). Don't worry, gems currently in use will not be
   removed.
 
+  This option is deprecated in favor of the `clean` setting.
+
 * `--deployment`:
   In [deployment mode][DEPLOYMENT MODE], Bundler will 'roll-out' the bundle for
   production or CI use. Please check carefully if you want to have this option
   enabled in your development environment.
 
+  This option is deprecated in favor of the `deployment` setting.
+
 * `--redownload`:
   Force download every gem, even if the required versions are already available
   locally.
@@ -77,6 +85,8 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
   Do not allow the Gemfile.lock to be updated after this install. Exits
   non-zero if there are going to be changes to the Gemfile.lock.
 
+  This option is deprecated in favor of the `frozen` setting.
+
 * `--full-index`:
   Bundler will not call Rubygems' API endpoint (default) but download and cache
   a (currently big) index file of all gems. Performance can be improved for
@@ -95,7 +105,7 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
 
 * `--local`:
   Do not attempt to connect to `rubygems.org`. Instead, Bundler will use the
-  gems already present in Rubygems' cache or in `vendor/cache`. Note that if a
+  gems already present in Rubygems' cache or in `vendor/cache`. Note that if an
   appropriate platform-specific gem exists on `rubygems.org` it will not be
   found.
 
@@ -107,6 +117,8 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
 * `--no-prune`:
   Don't remove stale gems from the cache when the installation finishes.
 
+  This option is deprecated in favor of the `no_prune` setting.
+
 * `--path=<path>`:
   The location to install the specified gems to. This defaults to Rubygems'
   setting. Bundler shares this location with Rubygems, `gem install ...` will
@@ -114,6 +126,8 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
   `--path ...` setting will show up by calling `gem list`. Accordingly, gems
   installed to other locations will not get listed.
 
+  This option is deprecated in favor of the `path` setting.
+
 * `--quiet`:
   Do not print progress information to the standard output. Instead, Bundler
   will exit using a status code (`$?`).
@@ -127,6 +141,8 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
   `--shebang jruby` these executables will be changed to execute `jruby`
   instead.
 
+  This option is deprecated in favor of the `shebang` setting.
+
 * `--standalone[=<list>]`:
   Makes a bundle that can work without depending on Rubygems or Bundler at
   runtime. A space separated list of groups to install has to be specified.
@@ -139,6 +155,8 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
   Installs the gems specified in the bundle to the system's Rubygems location.
   This overrides any previous configuration of `--path`.
 
+  This option is deprecated in favor of the `system` setting.
+
 * `--trust-policy=[<policy>]`:
   Apply the Rubygems security policy <policy>, where policy is one of
   `HighSecurity`, `MediumSecurity`, `LowSecurity`, `AlmostNoSecurity`, or
@@ -151,11 +169,15 @@ time `bundle install` is run, use `bundle config` (see bundle-config(1)).
   in the remembered list of groups given to --without, it is removed
   from that list.
 
+  This option is deprecated in favor of the `with` setting.
+
 * `--without=<list>`:
   A space-separated list of groups referencing gems to skip during installation.
   If a group is given that is in the remembered list of groups given
   to --with, it is removed from that list.
 
+  This option is deprecated in favor of the `without` setting.
+
 ## DEPLOYMENT MODE
 
 Bundler's defaults are optimized for development. To switch to

data/bundler/{man/bundle-list.ronn → lib/bundler/man/bundle-list.1.ronn}

@@ -3,7 +3,7 @@ bundle-list(1) -- List all the gems in the bundle
 
 ## SYNOPSIS
 
-`bundle list` [--name-only] [--paths] [--without-group=GROUP] [--only-group=GROUP]
+`bundle list` [--name-only] [--paths] [--without-group=GROUP[ GROUP...]] [--only-group=GROUP[ GROUP...]]
 
 ## DESCRIPTION
 
@@ -19,7 +19,7 @@ bundle list --without-group test
 
 bundle list --only-group dev
 
-bundle list --only-group dev --paths
+bundle list --only-group dev test --paths
 
 ## OPTIONS
 
@@ -27,7 +27,7 @@ bundle list --only-group dev --paths
   Print only the name of each gem.
 * `--paths`:
   Print the path to each gem in the bundle.
-* `--without-group`:
-  Print all gems expect from a group.
-* `--only-group`:
-  Print gems from a particular group.
+* `--without-group=<list>`:
+  A space-separated list of groups of gems to skip during printing.
+* `--only-group=<list>`:
+  A space-separated list of groups of gems to print.

data/bundler/{man → lib/bundler/man}/gemfile.5.ronn

@@ -120,8 +120,8 @@ Each _gem_ `MAY` have one or more version specifiers.
 ### REQUIRE AS
 
 Each _gem_ `MAY` specify files that should be used when autorequiring via
-`Bundler.require`. You may pass an array with multiple files or `true` if file
-you want `required` has same name as _gem_ or `false` to
+`Bundler.require`. You may pass an array with multiple files or `true` if the file
+you want `required` has the same name as _gem_ or `false` to
 prevent any file from being autorequired.
 
     gem "redis", :require => ["redis/connection/hiredis", "redis"]
@@ -163,8 +163,8 @@ not install with the `without` configuration.
 
 To specify multiple groups to ignore, specify a list of groups separated by spaces.
 
-    bundle config set without test
-    bundle config set without development test
+    bundle config set --local without test
+    bundle config set --local without development test
 
 Also, calling `Bundler.setup` with no parameters, or calling `require "bundler/setup"`
 will setup all groups except for the ones you excluded via `--without` (since they

data/bundler/lib/bundler/mirror.rb

@@ -43,7 +43,7 @@ module Bundler
         config.update_mirror(mirror)
       end
 
-    private
+      private
 
       def fetch_valid_mirror_for(uri)
         downcased = uri.to_s.downcase
@@ -158,7 +158,7 @@ module Bundler
         end
       end
 
-    private
+      private
 
       def wait_for_writtable_socket(socket, address, timeout)
         if IO.select(nil, [socket], nil, timeout)

data/bundler/lib/bundler/plugin.rb

@@ -16,7 +16,7 @@ module Bundler
 
     PLUGIN_FILE_NAME = "plugins.rb".freeze
 
-  module_function
+    module_function
 
     def reset!
       instance_variables.each {|i| remove_instance_variable(i) }
@@ -39,12 +39,37 @@ module Bundler
 
       save_plugins names, specs
     rescue PluginError => e
-      if specs
-        specs_to_delete = Hash[specs.select {|k, _v| names.include?(k) && !index.commands.values.include?(k) }]
-        specs_to_delete.values.each {|spec| Bundler.rm_rf(spec.full_gem_path) }
+      specs_to_delete = specs.select {|k, _v| names.include?(k) && !index.commands.values.include?(k) }
+      specs_to_delete.each_value {|spec| Bundler.rm_rf(spec.full_gem_path) }
+
+      names_list = names.map {|name| "`#{name}`" }.join(", ")
+      Bundler.ui.error "Failed to install the following plugins: #{names_list}. The underlying error was: #{e.message}.\n #{e.backtrace.join("\n ")}"
+    end
+
+    # Uninstalls plugins by the given names
+    #
+    # @param [Array<String>] names the names of plugins to be uninstalled
+    def uninstall(names, options)
+      if names.empty? && !options[:all]
+        Bundler.ui.error "No plugins to uninstall. Specify at least 1 plugin to uninstall.\n"\
+          "Use --all option to uninstall all the installed plugins."
+        return
       end
 
-      Bundler.ui.error "Failed to install plugin #{name}: #{e.message}\n  #{e.backtrace.join("\n ")}"
+      names = index.installed_plugins if options[:all]
+      if names.any?
+        names.each do |name|
+          if index.installed?(name)
+            Bundler.rm_rf(index.plugin_path(name))
+            index.unregister_plugin(name)
+            Bundler.ui.info "Uninstalled plugin #{name}"
+          else
+            Bundler.ui.error "Plugin #{name} is not installed \n"
+          end
+        end
+      else
+        Bundler.ui.info "No plugins installed"
+      end
     end
 
     # List installed plugins and commands