ruby_smb 1.1.0 → 2.0.4

data/lib/ruby_smb/dcerpc/request.rb

@@ -27,12 +27,25 @@ module RubySMB
           open_key_request       RubySMB::Dcerpc::Winreg::REG_OPEN_KEY
           query_info_key_request RubySMB::Dcerpc::Winreg::REG_QUERY_INFO_KEY
           query_value_request    RubySMB::Dcerpc::Winreg::REG_QUERY_VALUE
+          create_key_request     RubySMB::Dcerpc::Winreg::REG_CREATE_KEY
+          save_key_request       RubySMB::Dcerpc::Winreg::REG_SAVE_KEY
           string                 :default
         end
         choice 'Srvsvc', selection: -> { opnum } do
           net_share_enum_all RubySMB::Dcerpc::Srvsvc::NET_SHARE_ENUM_ALL, host: -> { host rescue '' }
           string             :default
         end
+        choice 'Svcctl', selection: -> { opnum } do
+          open_sc_manager_w_request       RubySMB::Dcerpc::Svcctl::OPEN_SC_MANAGER_W
+          open_service_w_request          RubySMB::Dcerpc::Svcctl::OPEN_SERVICE_W
+          query_service_status_request    RubySMB::Dcerpc::Svcctl::QUERY_SERVICE_STATUS
+          query_service_config_w_request  RubySMB::Dcerpc::Svcctl::QUERY_SERVICE_CONFIG_W
+          change_service_config_w_request RubySMB::Dcerpc::Svcctl::CHANGE_SERVICE_CONFIG_W
+          start_service_w_request         RubySMB::Dcerpc::Svcctl::START_SERVICE_W
+          control_service_request         RubySMB::Dcerpc::Svcctl::CONTROL_SERVICE
+          close_service_handle_request    RubySMB::Dcerpc::Svcctl::CLOSE_SERVICE_HANDLE
+          string                          :default
+        end
         string :default
       end
 

data/lib/ruby_smb/dcerpc/rpc_security_attributes.rb

@@ -0,0 +1,34 @@
+module RubySMB
+  module Dcerpc
+
+    # This class represents a RPC_SECURITY_DESCRIPTOR structure as defined in
+    # [2.2.8 RPC_SECURITY_DESCRIPTOR](https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-rrp/9729e781-8eb9-441b-82ca-e898f98d29c2)
+    class RpcSecurityDescriptor < BinData::Record
+      endian :little
+
+      ndr_lp_byte_array :lp_security_descriptor
+      uint32            :cb_in_security_descriptor
+      uint32            :cb_out_security_descriptor
+    end
+
+    # This class represents a RPC_SECURITY_ATTRIBUTES structure as defined in
+    # [2.2.7 RPC_SECURITY_ATTRIBUTES](https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-rrp/bc37b8cf-8c94-4804-ad53-0aaf5eaf0ecb)
+    class RpcSecurityAttributes < BinData::Record
+      endian :little
+
+      uint32                  :n_length
+      rpc_security_descriptor :rpc_security_descriptor
+      uint8                   :b_inheritHandle
+    end
+
+    # This class represents a pointer to a RPC_SECURITY_ATTRIBUTES structure as defined in
+    # [2.2.7 RPC_SECURITY_ATTRIBUTES](https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-rrp/bc37b8cf-8c94-4804-ad53-0aaf5eaf0ecb)
+    class PrpcSecurityAttributes < Ndr::NdrPointer
+      endian :little
+
+      rpc_security_attributes :referent, onlyif: -> { self.referent_id != 0 }
+    end
+
+  end
+end
+

data/lib/ruby_smb/dcerpc/rrp_unicode_string.rb

@@ -8,8 +8,8 @@ module RubySMB
     class RrpUnicodeString < BinData::Primitive
       endian :little
 
-      uint16     :buffer_length,  initial_value: -> { buffer.to_s == "\0" ? 0 : buffer.actual_count * 2 }
-      uint16     :maximum_length, initial_value: -> { buffer.to_s == "\0" ? 0 : buffer.max_count * 2 }
+      uint16     :buffer_length
+      uint16     :maximum_length
       ndr_lp_str :buffer
 
       def get
@@ -18,16 +18,19 @@ module RubySMB
 
       def set(buf)
         self.buffer = buf
-        self.buffer_length = self.buffer.to_s == "\0" ? 0 : self.buffer.actual_count * 2
-        self.maximum_length = self.buffer.to_s == "\0" ? 0 : self.buffer.max_count * 2
+        self.buffer_length = self.buffer == :null ? 0 : self.buffer.referent.actual_count * 2
+        # Don't reset maximum_length if the buffer is NULL to make sure we can
+        # set it independently of the buffer size
+        return if self.maximum_length > 0 && self.buffer == :null
+        self.maximum_length = self.buffer.referent.max_count * 2
       end
     end
 
     # A pointer to a RRP_UNICODE_STRING structure
-    class PrrpUnicodeString < Ndr::NdrTopLevelFullPointer
+    class PrrpUnicodeString < Ndr::NdrPointer
       endian :little
 
-      rrp_unicode_string :referent, onlyif: -> { !is_a_null_pointer? }
+      rrp_unicode_string :referent, onlyif: -> { self.referent_id != 0 }
     end
 
   end

data/lib/ruby_smb/dcerpc/svcctl.rb

@@ -0,0 +1,479 @@
+module RubySMB
+  module Dcerpc
+    module Svcctl
+
+      UUID = '367abb81-9844-35f1-ad32-98f038001003'
+      VER_MAJOR = 2
+      VER_MINOR = 0
+
+      # Operation numbers
+      CLOSE_SERVICE_HANDLE    = 0x0000
+      CONTROL_SERVICE         = 0x0001
+      QUERY_SERVICE_STATUS    = 0x0006
+      CHANGE_SERVICE_CONFIG_W = 0x000B
+      OPEN_SC_MANAGER_W       = 0x000F
+      OPEN_SERVICE_W          = 0x0010
+      QUERY_SERVICE_CONFIG_W  = 0x0011
+      START_SERVICE_W         = 0x0013
+
+
+      class ScRpcHandle < Ndr::NdrContextHandle; end
+
+
+      #################################
+      #           Constants           #
+      #################################
+
+
+      ################
+      # Service Access
+      # https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-scmr/0d7a7011-9f41-470d-ad52-8535b47ac282
+
+      # In addition to all access rights in this table, SERVICE_ALL_ACCESS
+      # includes Delete (DE), Read Control (RC), Write DACL (WD), and Write
+      # Owner (WO) access, as specified in ACCESS_MASK (section 2.4.3) of
+      # [MS-DTYP].
+      SERVICE_ALL_ACCESS            = 0x000F01FF
+      # Required to change the configuration of a service.
+      SERVICE_CHANGE_CONFIG         = 0x00000002
+      # Required to enumerate the services installed on the server.
+      SERVICE_ENUMERATE_DEPENDENTS  = 0x00000008
+      # Required to request immediate status from the service.
+      SERVICE_INTERROGATE           = 0x00000080
+      # Required to pause or continue the service.
+      SERVICE_PAUSE_CONTINUE        = 0x00000040
+      # Required to query the service configuration.
+      SERVICE_QUERY_CONFIG          = 0x00000001
+      # Required to request the service status.
+      SERVICE_QUERY_STATUS          = 0x00000004
+      # Required to start the service.
+      SERVICE_START                 = 0x00000010
+      # Required to stop the service.
+      SERVICE_STOP                  = 0x00000020
+      # Required to specify a user-defined control code.
+      SERVICE_USER_DEFINED_CONTROL  = 0x00000100
+      # Required for a service to set its status.
+      SERVICE_SET_STATUS            = 0x00008000
+
+      # Specific access types for Service Control Manager object:
+
+      # Required to lock the SCM database.
+      SC_MANAGER_LOCK               = 0x00000008
+      # Required for a service to be created.
+      SC_MANAGER_CREATE_SERVICE     = 0x00000002
+      # Required to enumerate a service.
+      SC_MANAGER_ENUMERATE_SERVICE  = 0x00000004
+      # Required to connect to the SCM.
+      SC_MANAGER_CONNECT            = 0x00000001
+      # Required to query the lock status of the SCM database.
+      SC_MANAGER_QUERY_LOCK_STATUS  = 0x00000010
+      # Required to call the RNotifyBootConfigStatus method.
+      SC_MANAGER_MODIFY_BOOT_CONFIG = 0x00000020
+
+
+      ##############
+      # Service Type
+
+      # A driver service. These are services that manage devices on the system.
+      SERVICE_KERNEL_DRIVER       = 0x00000001
+      # A file system driver service. These are services that manage file
+      # systems on the system.
+      SERVICE_FILE_SYSTEM_DRIVER  = 0x00000002
+      # A service that runs in its own process.
+      SERVICE_WIN32_OWN_PROCESS   = 0x00000010
+      # A service that shares a process with other services.
+      SERVICE_WIN32_SHARE_PROCESS = 0x00000020
+
+      # The service can interact with the desktop. Only
+      # SERVICE_WIN32_OWN_PROCESS and SERVICE_INTERACTIVE_PROCESS OR
+      # SERVICE_WIN32_SHARE_PROCESS and SERVICE_INTERACTIVE_PROCESS can be
+      # combined.
+      SERVICE_INTERACTIVE_PROCESS = 0x00000100
+
+      ####################
+      # Service Start Type
+
+      # Starts the driver service when the system boots up. This value is valid
+      # only for driver services.
+      SERVICE_BOOT_START   = 0x00000000
+      # Starts the driver service when the system boots up. This value is valid
+      # only for driver services. The services marked SERVICE_SYSTEM_START are
+      # started after all SERVICE_BOOT_START services have been started.
+      SERVICE_SYSTEM_START = 0x00000001
+      # A service started automatically by the SCM during system startup.
+      SERVICE_AUTO_START   = 0x00000002
+      # Starts the service when a client requests the SCM to start the service.
+      SERVICE_DEMAND_START = 0x00000003
+      # A service that cannot be started. Attempts to start the service result
+      # in the error code ERROR_SERVICE_DISABLED.
+      SERVICE_DISABLED     = 0x00000004
+
+
+      #######################
+      # Service Error Control
+
+      # The severity of the error if this service fails to start during startup
+      # and the action the SCM takes if failure occurs.
+
+      # The SCM ignores the error and continues the startup operation.
+      SERVICE_ERROR_IGNORE   = 0x00000000
+      # The SCM logs the error in the event log and continues the startup
+      # operation.
+      SERVICE_ERROR_NORMAL   = 0x00000001
+      # The SCM logs the error in the event log. If the last-known good
+      # configuration is being started, the startup operation continues.
+      # Otherwise, the system is restarted with the last-known good
+      # configuration.
+      SERVICE_ERROR_SEVERE   = 0x00000002
+      # The SCM SHOULD log the error in the event log if possible. If the
+      # last-known good configuration is being started, the startup operation
+      # fails. Otherwise, the system is restarted with the last-known good
+      # configuration.
+      SERVICE_ERROR_CRITICAL = 0x00000003
+
+
+      #########################################
+      # Change Service Config specific constant
+
+      # Service type, start or error control does not change.
+      SERVICE_NO_CHANGE        = 0xFFFFFFFF
+
+
+      ################
+      # Current State
+
+      SERVICE_PAUSED           = 0x00000007
+      SERVICE_PAUSE_PENDING    = 0x00000006
+      SERVICE_CONTINUE_PENDING = 0x00000005
+      SERVICE_RUNNING          = 0x00000004
+      SERVICE_STOP_PENDING     = 0x00000003
+      SERVICE_START_PENDING    = 0x00000002
+      SERVICE_STOPPED          = 0x00000001
+
+      ###################
+      # Controls Accepted
+
+      # The control codes that the service accepts and processes in its handler
+      # function. One or more of the following values can be set. By default,
+      # all services accept the SERVICE_CONTROL_INTERROGATE value. A value of
+      # zero indicates that no controls are accepted.
+
+      # Service can reread its startup parameters without being stopped and
+      # restarted. This control code allows the service to receive
+      # SERVICE_CONTROL_PARAMCHANGE notifications.
+      SERVICE_ACCEPT_PARAMCHANGE           = 0x00000008
+      # Service can be paused and continued. This control code allows the
+      # service to receive SERVICE_CONTROL_PAUSE and SERVICE_CONTROL_CONTINUE
+      # notifications.
+      SERVICE_ACCEPT_PAUSE_CONTINUE        = 0x00000002
+      # Service is notified when system shutdown occurs. This control code
+      # enables the service to receive SERVICE_CONTROL_SHUTDOWN notifications
+      # from the server.
+      SERVICE_ACCEPT_SHUTDOWN              = 0x00000004
+      # Service can be stopped. This control code allows the service to receive
+      # SERVICE_CONTROL_STOP notifications.
+      SERVICE_ACCEPT_STOP                  = 0x00000001
+      # Service is notified when the computer's hardware profile changes.
+      SERVICE_ACCEPT_HARDWAREPROFILECHANGE = 0x00000020
+      # Service is notified when the computer's power status changes.
+      SERVICE_ACCEPT_POWEREVENT            = 0x00000040
+      # Service is notified when the computer's session status changes.
+      SERVICE_ACCEPT_SESSIONCHANGE         = 0x00000080
+      # The service can perform preshutdown tasks. SERVICE_ACCEPT_PRESHUTDOWN
+      # is sent before sending SERVICE_CONTROL_SHUTDOWN to give more time to
+      # services that need extra time before shutdown occurs.
+      SERVICE_ACCEPT_PRESHUTDOWN           = 0x00000100
+      # Service is notified when the system time changes.
+      SERVICE_ACCEPT_TIMECHANGE            = 0x00000200
+      # Service is notified when an event for which the service has registered
+      # occurs.
+      SERVICE_ACCEPT_TRIGGEREVENT          = 0x00000400
+
+      ###################
+      # Controls
+
+      # Notifies a paused service that it SHOULD resume. The
+      # SERVICE_PAUSE_CONTINUE access right MUST have been granted to the caller
+      # when the RPC control handle to the service record was created. The
+      # service record MUST have the SERVICE_ACCEPT_PAUSE_CONTINUE bit set in
+      # the ServiceStatus.dwControlsAccepted field of the service record.
+      SERVICE_CONTROL_CONTINUE       = 0x00000003
+      # Notifies a service that it SHOULD report its current status information
+      # to the SCM. The SERVICE_INTERROGATE access right MUST have been granted
+      # to the caller when the RPC control handle to the service record was
+      # created.
+      SERVICE_CONTROL_INTERROGATE    = 0x00000004
+      # Notifies a service that there is a new component for binding. The
+      # SERVICE_PAUSE_CONTINUE access right MUST have been granted to the
+      # caller when the RPC control handle to the service record was created.
+      # The service record MUST have the SERVICE_ACCEPT_NETBINDCHANGE bit set
+      # in the ServiceStatus.dwControlsAccepted field of the service record.
+      SERVICE_CONTROL_NETBINDADD     = 0x00000007
+      # Notifies a network service that one of its bindings has been disabled.
+      # The SERVICE_PAUSE_CONTINUE access right MUST have been granted to the
+      # caller when the RPC control handle to the service record was created.
+      # The service record MUST have the SERVICE_ACCEPT_NETBINDCHANGE bit set
+      # in the ServiceStatus.dwControlsAccepted field of the service record.
+      SERVICE_CONTROL_NETBINDDISABLE = 0x0000000A
+      # Notifies a network service that a disabled binding has been enabled.
+      # The SERVICE_PAUSE_CONTINUE access right MUST have been granted to the
+      # caller when the RPC control handle to the service record was created.
+      # The service record MUST have the SERVICE_ACCEPT_NETBINDCHANGE bit set
+      # in the ServiceStatus.dwControlsAccepted field of the service record.
+      SERVICE_CONTROL_NETBINDENABLE  = 0x00000009
+      # Notifies a network service that a component for binding has been
+      # removed. The SERVICE_PAUSE_CONTINUE access right MUST have been granted
+      # to the caller when the RPC control handle to the service record was
+      # created. The service record MUST have the SERVICE_ACCEPT_NETBINDCHANGE
+      # bit set in the ServiceStatus.dwControlsAccepted field of the service
+      # record.
+      SERVICE_CONTROL_NETBINDREMOVE  = 0x00000008
+      # Notifies a service that its startup parameters have changed. The
+      # SERVICE_PAUSE_CONTINUE access right MUST have been granted to the
+      # caller when the RPC control handle to the service record was created.
+      # The service record MUST have the SERVICE_ACCEPT_PARAMCHANGE bit set in
+      # the ServiceStatus.dwControlsAccepted field of the service record.
+      SERVICE_CONTROL_PARAMCHANGE    = 0x00000006
+      # Notifies a service that it SHOULD pause. The SERVICE_PAUSE_CONTINUE
+      # access right MUST have been granted to the caller when the RPC control
+      # handle to the service record was created. The service record MUST have
+      # the SERVICE_ACCEPT_PAUSE_CONTINUE bit set in the
+      # ServiceStatus.dwControlsAccepted field of the service record.
+      SERVICE_CONTROL_PAUSE          = 0x00000002
+      # Notifies a service that it SHOULD stop. The SERVICE_STOP access right
+      # MUST have been granted to the caller when the RPC control handle to the
+      # service record was created. The service record MUST have the
+      # SERVICE_ACCEPT_STOP bit set in the ServiceStatus.dwControlsAccepted
+      # field of the service record.
+      SERVICE_CONTROL_STOP           = 0x00000001
+
+      require 'ruby_smb/dcerpc/svcctl/service_status'
+      require 'ruby_smb/dcerpc/svcctl/open_sc_manager_w_request'
+      require 'ruby_smb/dcerpc/svcctl/open_sc_manager_w_response'
+      require 'ruby_smb/dcerpc/svcctl/open_service_w_request'
+      require 'ruby_smb/dcerpc/svcctl/open_service_w_response'
+      require 'ruby_smb/dcerpc/svcctl/query_service_status_request'
+      require 'ruby_smb/dcerpc/svcctl/query_service_status_response'
+      require 'ruby_smb/dcerpc/svcctl/query_service_config_w_request'
+      require 'ruby_smb/dcerpc/svcctl/query_service_config_w_response'
+      require 'ruby_smb/dcerpc/svcctl/change_service_config_w_request'
+      require 'ruby_smb/dcerpc/svcctl/change_service_config_w_response'
+      require 'ruby_smb/dcerpc/svcctl/start_service_w_request'
+      require 'ruby_smb/dcerpc/svcctl/start_service_w_response'
+      require 'ruby_smb/dcerpc/svcctl/control_service_request'
+      require 'ruby_smb/dcerpc/svcctl/control_service_response'
+      require 'ruby_smb/dcerpc/svcctl/close_service_handle_request'
+      require 'ruby_smb/dcerpc/svcctl/close_service_handle_response'
+
+      # Open the SCM database on the specified server.
+      #
+      # @param rhost [String] the server's machine name
+      # @return [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the newly opened SCM database
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a OpenSCManagerWResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def open_sc_manager_w(rhost, access = SERVICE_START | SERVICE_STOP | SERVICE_CHANGE_CONFIG | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_ENUMERATE_DEPENDENTS | SC_MANAGER_ENUMERATE_SERVICE)
+        open_sc_manager_w_request = OpenSCManagerWRequest.new(dw_desired_access: access)
+        open_sc_manager_w_request.lp_machine_name = rhost
+        open_sc_manager_w_request.lp_database_name = 'ServicesActive'
+        response = dcerpc_request(open_sc_manager_w_request)
+        begin
+          open_sc_manager_w_response = OpenSCManagerWResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading OpenSCManagerWResponse'
+        end
+        unless open_sc_manager_w_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when opening Service Control Manager (SCM): "\
+            "#{WindowsError::Win32.find_by_retval(open_sc_manager_w_response.error_status.value).join(',')}"
+        end
+        open_sc_manager_w_response.lp_sc_handle
+      end
+
+      # Creates an RPC context handle to an existing service record.
+      #
+      # @param scm_handle [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the SCM database
+      # @param service_name [Srting] the ServiceName of the service record
+      # @param access [Integer] access right
+      # @return [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the found service record
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a OpenServiceWResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def open_service_w(scm_handle, service_name, access = SERVICE_ALL_ACCESS)
+        open_service_w_request = OpenServiceWRequest.new(dw_desired_access: access)
+        open_service_w_request.lp_sc_handle = scm_handle
+        open_service_w_request.lp_service_name = service_name
+        response = dcerpc_request(open_service_w_request)
+        begin
+          open_sercice_w_response = OpenServiceWResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading OpenServiceWResponse'
+        end
+        unless open_sercice_w_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when opening #{service_name} service: "\
+            "#{WindowsError::Win32.find_by_retval(open_sercice_w_response.error_status.value).join(',')}"
+        end
+        open_sercice_w_response.lp_sc_handle
+      end
+
+      # Returns the current status of the specified service
+      #
+      # @param scm_handle [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the service record
+      # @return [RubySMB::Dcerpc::Svcctl::ServiceStatus] structure that contains the status information for the service
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a QueryServiceStatusResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def query_service_status(svc_handle)
+        qss_request = QueryServiceStatusRequest.new
+        qss_request.h_service = svc_handle
+        response = dcerpc_request(qss_request)
+        begin
+          qss_response = QueryServiceStatusResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading QueryServiceStatusResponse'
+        end
+        unless qss_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when querying service status: "\
+            "#{WindowsError::Win32.find_by_retval(qss_response.error_status.value).join(',')}"
+        end
+        qss_response.lp_service_status
+      end
+
+      # Returns the configuration parameters of the specified service
+      #
+      # @param scm_handle [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the service record
+      # @return [RubySMB::Dcerpc::Svcctl::QueryServiceConfigW] structure that contains the configuration parameters for the service
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a QueryServiceConfigWResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def query_service_config(svc_handle)
+        qsc_request = QueryServiceConfigWRequest.new
+        qsc_request.h_service = svc_handle
+        qsc_request.cb_buf_size = 0
+        response = dcerpc_request(qsc_request)
+        begin
+          qsc_response = QueryServiceConfigWResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading QueryServiceConfigWResponse'
+        end
+        if qsc_response.error_status == WindowsError::Win32::ERROR_INSUFFICIENT_BUFFER
+          qsc_request.cb_buf_size = qsc_response.pcb_bytes_needed
+          response = dcerpc_request(qsc_request)
+          begin
+            qsc_response = QueryServiceConfigWResponse.read(response)
+          rescue IOError
+            raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading QueryServiceConfigWResponse'
+          end
+        end
+        unless qsc_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when querying service configuration: "\
+            "#{WindowsError::Win32.find_by_retval(qsc_response.error_status.value).join(',')}"
+        end
+        qsc_response.lp_service_config
+      end
+
+      # Changes a service's configuration parameters in the SCM database
+      #
+      # @param scm_handle [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the service record
+      # @param opts [Hash] configuration parameters to change
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a ChangeServiceConfigWResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def change_service_config_w(svc_handle, opts = {})
+        opts = {
+          h_service:             svc_handle,
+          dw_service_type:       opts[:service_type] || SERVICE_NO_CHANGE,
+          dw_start_type:         opts[:start_type] || SERVICE_NO_CHANGE,
+          dw_error_control:      opts[:error_control] || SERVICE_NO_CHANGE,
+          lp_binary_path_name:   opts[:binary_path_name] || :null,
+          lp_load_order_group:   opts[:load_order_group] || :null,
+          dw_tag_id:             opts[:tag_id] || :null,
+          lp_dependencies:       opts[:dependencies] || [],
+          lp_service_start_name: opts[:service_start_name] || :null,
+          lp_password:           opts[:password] || [],
+          lp_display_name:       opts[:display_name] || :null
+        }
+
+        csc_request = ChangeServiceConfigWRequest.new(opts)
+        response = dcerpc_request(csc_request)
+        begin
+          csc_response = ChangeServiceConfigWResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading ChangeServiceConfigWResponse'
+        end
+        unless csc_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when changing the service configuration: "\
+            "#{WindowsError::Win32.find_by_retval(csc_response.error_status.value).join(',')}"
+        end
+      end
+
+      # Starts a specified service
+      #
+      # @param scm_handle [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the service record
+      # @param argv [Array<String>] arguments to the service (Array of
+      #   strings). The first element in argv must be the name of the service.
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a StartServiceWResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def start_service_w(svc_handle, argv = [])
+        ss_request = StartServiceWRequest.new(h_service: svc_handle)
+        unless argv.empty?
+          ss_request.argc = argv.size
+          ndr_string_ptrsw = RubySMB::Dcerpc::Ndr::NdrStringPtrsw.new
+          ndr_string_ptrsw.elements = argv
+          ss_request.argv = ndr_string_ptrsw
+        end
+        response = dcerpc_request(ss_request)
+        begin
+          ss_response = StartServiceWResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading StartServiceWResponse'
+        end
+        unless ss_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when starting the service: "\
+            "#{WindowsError::Win32.find_by_retval(ss_response.error_status.value).join(',')}"
+        end
+      end
+
+      # Send a control code to a specific service handle
+      #
+      # @param scm_handle [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the service record
+      # @param control [Integer] control code
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a ControlServiceResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def control_service(svc_handle, control)
+        cs_request = ControlServiceRequest.new(h_service: svc_handle, dw_control: control)
+        response = dcerpc_request(cs_request)
+        begin
+          cs_response = ControlServiceResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading ControlServiceResponse'
+        end
+        unless cs_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when sending a control to the service: "\
+            "#{WindowsError::Win32.find_by_retval(cs_response.error_status.value).join(',')}"
+        end
+      end
+
+      # Releases the handle to the specified service or the SCM database.
+      #
+      # @param scm_handle [RubySMB::Dcerpc::Svcctl::ScRpcHandle] handle to the service record or to the SCM database
+      # @raise [RubySMB::Dcerpc::Error::InvalidPacket] if the response is not a CloseServiceHandleResponse packet
+      # @raise [RubySMB::Dcerpc::Error::SvcctlError] if the response error status is not ERROR_SUCCESS
+      def close_service_handle(svc_handle)
+        csh_request = CloseServiceHandleRequest.new(h_sc_object: svc_handle)
+        response = dcerpc_request(csh_request)
+        begin
+          csh_response = CloseServiceHandleResponse.read(response)
+        rescue IOError
+          raise RubySMB::Dcerpc::Error::InvalidPacket, 'Error reading CloseServiceHandleResponse'
+        end
+        unless csh_response.error_status == WindowsError::Win32::ERROR_SUCCESS
+          raise RubySMB::Dcerpc::Error::SvcctlError,
+            "Error returned when closing the service: "\
+            "#{WindowsError::Win32.find_by_retval(csh_response.error_status.value).join(',')}"
+        end
+      end
+    end
+  end
+end