ruby-jss 1.6.4 → 2.0.0b1

data/lib/jss/api_connection.rb

@@ -1,1029 +0,0 @@
-### Copyright 2020 Pixar
-###
-###    Licensed under the Apache License, Version 2.0 (the "Apache License")
-###    with the following modification; you may not use this file except in
-###    compliance with the Apache License and the following modification to it:
-###    Section 6. Trademarks. is deleted and replaced with:
-###
-###    6. Trademarks. This License does not grant permission to use the trade
-###       names, trademarks, service marks, or product names of the Licensor
-###       and its affiliates, except as required to comply with Section 4(c) of
-###       the License and to reproduce the content of the NOTICE file.
-###
-###    You may obtain a copy of the Apache License at
-###
-###        http://www.apache.org/licenses/LICENSE-2.0
-###
-###    Unless required by applicable law or agreed to in writing, software
-###    distributed under the Apache License with the above modification is
-###    distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-###    KIND, either express or implied. See the Apache License for the specific
-###    language governing permissions and limitations under the Apache License.
-###
-###
-
-###
-module JSS
-
-  # Instances of this class represent a REST connection to a JSS API.
-  #
-  # For most cases, a single connection to a single JSS is all you need, and
-  # this is ruby-jss's default behavior.
-  #
-  # If needed, multiple connections can be made and used sequentially or
-  # simultaneously.
-  #
-  # == Using the default connection
-  #
-  # When ruby-jss is loaded, a not-yet-connected default instance of
-  # JSS::APIConnection is created and stored in the constant JSS::API.
-  # This connection is used as the initial 'active connection' (see below)
-  # so all methods that make API calls will use it by default. For most uses,
-  # where you're only going to be working with one connection to one JSS, the
-  # default connection is all you need.
-  #
-  # Before using it you must call its {#connect} method, passing in appropriate
-  # connection details and credentials.
-  #
-  # Example:
-  #
-  #    require 'ruby-jss'
-  #    JSS.api.connect server: 'server.address.edu', user: 'jss-api-user', pw: :prompt
-  #    # (see {JSS::APIConnection#connect} for all the connection options)
-  #
-  #    a_phone = JSS::MobileDevice.fetch id: 8743
-  #
-  #    # the mobile device was fetched through the default connection
-  #
-  # == Using Multiple Simultaneous Connections
-  #
-  # Sometimes you need to connect simultaneously to more than one JSS.
-  # or to the same JSS with different credentials. ruby-jss allows you to
-  # create as many connections as needed, and gives you three ways to use them:
-  #
-  # 1. Making a connection 'active', after which API calls go thru it
-  #    automatically
-  #
-  #    Example:
-  #
-  #        a_computer = JSS::Computer.fetch id: 1234
-  #
-  #        # the JSS::Computer with id 1234 is fetched from the active connection
-  #        # and stored in the variable 'a_computer'
-  #
-  #    NOTE: When ruby-jss is first loaded, the default connection (see above)
-  #    is the active connection.
-  #
-  # 2. Passing an APIConnection instance to methods that use the API
-  #
-  #    Example:
-  #
-  #         a_computer = JSS::Computer.fetch id: 1234, api: production_api
-  #
-  #         # the JSS::Computer with id 1234 is fetched from the connection
-  #         # stored in the variable 'production_api'. The computer is
-  #         # then stored in the variable 'a_computer'
-  #
-  # 3. Using the APIConnection instance itself to make API calls.
-  #
-  #    Example:
-  #
-  #         a_computer = production_api.fetch :Computer, id: 1234
-  #
-  #         # the JSS::Computer with id 1234 is fetched from the connection
-  #         # stored in the variable 'production_api'. The computer is
-  #         # then stored in the variable 'a_computer'
-  #
-  # See below for more details about the ways to use multiple connections.
-  #
-  # NOTE:
-  # Objects retrieved or created through an APIConnection store an internal
-  # reference to that APIConnection and use that when they make other API
-  # calls, thus ensuring data consistency when using multiple connections.
-  #
-  # Similiarly, the data caches used by APIObject list methods (e.g.
-  # JSS::Computer.all, .all_names, and so on) are stored in the APIConnection
-  # instance through which they were read, so they won't be incorrect when
-  # you use multiple connections.
-  #
-  # == Making new APIConnection instances
-  #
-  # New connections can be created using the standard ruby 'new' method.
-  #
-  # If you provide connection details when calling 'new', they will be passed
-  # to the {#connect} method immediately. Otherwise you can call {#connect} later.
-  #
-  #   production_api = JSS::APIConnection.new(
-  #     name: 'prod',
-  #     server: 'prodserver.address.org',
-  #     user: 'produser',
-  #     pw: :prompt
-  #   )
-  #
-  #   # the new connection is now stored in the variable 'production_api'.
-  #
-  # == Using the 'Active' Connection
-  #
-  # While multiple connection instances can be created, only one at a time is
-  # 'the active connection' and all APIObject-based access methods in ruby-jss
-  # will use it automatically. When ruby-jss is loaded, the  default connection
-  # (see above) is the active connection.
-  #
-  # To use the active connection, just call a method on an APIObject subclass
-  # that uses the API.
-  #
-  # For example, the various list methods:
-  #
-  #   all_computer_sns = JSS::Computer.all_serial_numbers
-  #
-  #   # the list of all computer serial numbers is read from the active
-  #   # connection and stored in all_computer_sns
-  #
-  # Fetching an object from the API:
-  #
-  #   victim_md = JSS::MobileDevice.fetch id: 832
-  #
-  #   # the variable 'victim_md' now contains a JSS::MobileDevice queried
-  #   # through the active connection.
-  #
-  # The currently-active connection instance is available from the
-  # `JSS.api` method.
-  #
-  # === Making a Connection Active
-  #
-  # Only one connection is 'active' at a time and the currently active one is
-  # returned when you call `JSS.api` or its alias `JSS.active_connection`
-  #
-  # To activate another connection just pass it to the JSS.use_api method like so:
-  #
-  #   JSS.use_api production_api
-  #   # the connection we stored in 'production_api' is now active
-  #
-  # To re-activate to the default connection, just call
-  #   JSS.use_default_connection
-  #
-  # == Connection Names:
-  #
-  # As seen in the example above, you can provide a 'name:' parameter
-  # (a String or a Symbol) when creating a new connection. The name can be
-  # used later to identify connection objects.
-  #
-  # If you don't provide one, the name is ':disconnected' until you
-  # connect, and then 'user@server:port' after connecting.
-  #
-  # The name of the default connection is always :default
-  #
-  # To see the name of the currently active connection, just use `JSS.api.name`
-  #
-  #   JSS.use_api production_api
-  #   JSS.api.name  # => 'prod'
-  #
-  #   JSS.use_default_connection
-  #   JSS.api.name  # => :default
-  #
-  # == Creating, Storing and Activating a connection in one step
-  #
-  # Both of the above steps (creating/storing a connection, and making it
-  # active) can be performed in one step using the
-  # `JSS.new_api_connection` method, which creates a new APIConnection, makes it
-  # the active connection, and returns it.
-  #
-  #    production_api2 = JSS.new_api_connection(
-  #      name: 'prod2',
-  #      server: 'prodserver.address.org',
-  #      user: 'produser',
-  #      pw: :prompt
-  #    )
-  #
-  #   JSS.api.name  # => 'prod2'
-  #
-  # == Passing an APIConnection object to API-related methods
-  #
-  # All methods that use the API can take an 'api:' parameter which
-  # contains an APIConnection object. When provided, that APIconnection is
-  # used rather than the active connection.
-  #
-  # For example:
-  #
-  #   prod2_computer_sns = JSS::Computer.all_serial_numbers, api: production_api2
-  #
-  #   # the list of all computer serial numbers is read from the connection in
-  #   # the variable 'production_api2' and stored in 'prod2_computer_sns'
-  #
-  #   prod2_victim_md = JSS::MobileDevice.fetch id: 832, api: production_api2
-  #
-  #   # the variable 'prod2_victim_md' now contains a JSS::MobileDevice queried
-  #   # through the connection 'production_api2'.
-  #
-  # == Low-level use of APIConnection instances.
-  #
-  # For most cases, using APIConnection instances as mentioned above
-  # is all you'll need. However to access API resources that aren't yet
-  # implemented in other parts of ruby-jss, you can use the methods
-  # {#get_rsrc}, {#put_rsrc}, {#post_rsrc}, & {#delete_rsrc}
-  # documented below.
-  #
-  # For even lower-level work, you can access the underlying Faraday::Connection
-  # inside the APIConnection via the connection's {#cnx} attribute.
-  #
-  # APIConnection instances also have a {#server} attribute which contains an
-  # instance of {JSS::Server} q.v., representing the JSS to which it's connected.
-  #
-  class APIConnection
-
-    # Class Constants
-    #####################################
-
-    # The base API path in the jss URL
-    RSRC_BASE = 'JSSResource'.freeze
-
-    # A url path to load to see if there's an API available at a host.
-    # This just loads the API resource docs page
-    TEST_PATH = "#{RSRC_BASE}/accounts".freeze
-
-    # If the test path loads correctly from a casper server, it'll contain
-    # this text (this is what we get when we make an unauthenticated
-    # API call.)
-    TEST_CONTENT = '<p>The request requires user authentication</p>'.freeze
-
-    # The Default port
-    HTTP_PORT = 9006
-
-    # The Jamf default SSL port, default for locally-hosted servers
-    SSL_PORT = 8443
-
-    # The https default SSL port, default for Jamf Cloud servers
-    HTTPS_SSL_PORT = 443
-
-    # if either of these is specified, we'll default to SSL
-    SSL_PORTS = [SSL_PORT, HTTPS_SSL_PORT].freeze
-
-    # Recognize Jamf Cloud servers
-    JAMFCLOUD_DOMAIN = 'jamfcloud.com'.freeze
-
-    # JamfCloud connections default to 443, not 8443
-    JAMFCLOUD_PORT = HTTPS_SSL_PORT
-
-    # The top line of an XML doc for submitting data via API
-    XML_HEADER = '<?xml version="1.0" encoding="UTF-8" standalone="no"?>'.freeze
-
-    # Default timeouts in seconds
-    DFT_OPEN_TIMEOUT = 60
-    DFT_TIMEOUT = 60
-
-    # The Default SSL Version
-    DFT_SSL_VERSION = 'TLSv1_2'.freeze
-
-    RSRC_NOT_FOUND_MSG = 'The requested resource was not found'.freeze
-
-    # These classes are extendable, and may need cache flushing for EA definitions
-    EXTENDABLE_CLASSES = [JSS::Computer, JSS::MobileDevice, JSS::User].freeze
-
-    # values for the format param of get_rsrc
-    GET_FORMATS = %i[json xml].freeze
-
-    HTTP_ACCEPT_HEADER = 'Accept'.freeze
-    HTTP_CONTENT_TYPE_HEADER = 'Content-Type'.freeze
-
-    MIME_JSON = 'application/json'.freeze
-    MIME_XML = 'application/xml'.freeze
-
-    # Attributes
-    #####################################
-
-    # @return [String] the username who's connected to the JSS API
-    attr_reader :user
-    alias jss_user user
-
-    # @return [Faraday::Connection] the underlying connection resource
-    attr_reader :cnx
-
-    # @return [Boolean] are we connected right now?
-    attr_reader :connected
-    alias connected? connected
-
-    # @return [JSS::Server] the details of the JSS to which we're connected.
-    attr_reader :server
-
-    # @return [String] the hostname of the JSS to which we're connected.
-    attr_reader :server_host
-
-    # @return [String] any path in the URL below the hostname. See {#connect}
-    attr_reader :server_path
-
-    # @return [Integer] the port used for the connection
-    attr_reader :port
-
-    # @return [String] the protocol being used: http or https
-    attr_reader :protocol
-
-    # @return [Faraday::Response] The response from the most recent API call
-    attr_reader :last_http_response
-
-    # @return [String] The base URL to to the current REST API
-    attr_reader :rest_url
-
-    # @return [String,Symbol] an arbitrary name that can be given to this
-    # connection during initialization, using the name: parameter.
-    # defaults to user@hostname:port
-    attr_reader :name
-
-    # @return [Hash]
-    # This Hash caches the result of the the first API query for an APIObject
-    # subclass's .all summary list, keyed by the subclass's RSRC_LIST_KEY.
-    # See the APIObject.all class method.
-    #
-    # It also holds related data items for speedier processing:
-    #
-    # - The Hashes created by APIObject.map_all_ids_to(foo), keyed by
-    #   "#{RSRC_LIST_KEY}_map_#{other_key}".to_sym
-    #
-    # - This hash also holds a cache of the rarely-used APIObject.all_objects
-    #   hash, keyed by "#{RSRC_LIST_KEY}_objects".to_sym
-    #
-    #
-    # When APIObject.all, and related methods are called without an argument,
-    # and this hash has a matching value, the value is returned, rather than
-    # requerying the API. The first time a class calls .all, or whnever refresh
-    # is not false, the API is queried and the value in this hash is updated.
-    attr_reader :object_list_cache
-
-    # @return [Hash{Class: Hash{String => JSS::ExtensionAttribute}}]
-    # This Hash caches the Extension Attribute
-    # definition objects for the three types of ext. attribs:
-    # ComputerExtensionAttribute, MobileDeviceExtensionAttribute, and
-    # UserExtensionAttribute, whenever they are fetched for parsing or
-    # validating extention attribute data.
-    #
-    # The top-level keys are the EA classes themselves:
-    # - ComputerExtensionAttribute
-    # - MobileDeviceExtensionAttribute
-    # - UserExtensionAttribute
-    #
-    # These each point to a Hash of their instances, keyed by name, e.g.
-    #   {
-    #    "A Computer EA" => <JSS::ComputerExtensionAttribute...>,
-    #    "A different Computer EA" => <JSS::ComputerExtensionAttribute...>,
-    #    ...
-    #   }
-    #
-    attr_reader :ext_attr_definition_cache
-
-    # Constructor
-    #####################################
-
-    # If name: is provided (as a String or Symbol) that will be
-    # stored as the APIConnection's name attribute.
-    #
-    # For other available parameters, see {#connect}.
-    #
-    # If they are provided, they will be used to establish the
-    # connection immediately.
-    #
-    # If not, you must call {#connect} before accessing the API.
-    #
-    def initialize(args = {})
-      @name = args.delete :name
-      @name ||= :unknown
-      @connected = false
-      @object_list_cache = {}
-      connect args unless args.empty?
-    end # init
-
-    # Instance Methods
-    #####################################
-
-    # Connect to the JSS Classic API.
-    #
-    # @param args[Hash] the keyed arguments for connection.
-    #
-    # @option args :server[String] the hostname of the JSS API server, required if not defined in JSS::CONFIG
-    #
-    # @option args :server_path[String] If your JSS is not at the root of the server, e.g.
-    #   if it's at
-    #     https://myjss.myserver.edu:8443/dev_mgmt/jssweb
-    #   rather than
-    #     https://myjss.myserver.edu:8443/
-    #   then use this parameter to specify the path below the root e.g:
-    #     server_path: 'dev_mgmt/jssweb'
-    #
-    # @option args :port[Integer] the port number to connect with, defaults to 8443
-    #
-    # @option args :use_ssl[Boolean] should the connection be made over SSL? Defaults to true.
-    #
-    # @option args :verify_cert[Boolean] should HTTPS SSL certificates be verified. Defaults to true.
-    #
-    # @option args :user[String] a JSS user who has API privs, required if not defined in JSS::CONFIG
-    #
-    # @option args :pw[String,Symbol] Required, the password for that user, or :prompt, or :stdin
-    #   If :prompt, the user is promted on the commandline to enter the password for the :user.
-    #   If :stdin#, the password is read from a line of std in represented by the digit at #,
-    #   so :stdin3 reads the passwd from the third line of standard input. defaults to line 1,
-    #   if no digit is supplied. see {JSS.stdin}
-    #
-    # @option args :open_timeout[Integer] the number of seconds to wait for an initial response, defaults to 60
-    #
-    # @option args :timeout[Integer] the number of seconds before an API call times out, defaults to 60
-    #
-    # @return [true]
-    #
-    def connect(args = {})
-      # new connections always get new caches
-      flushcache
-
-      args[:no_port_specified] = args[:port].to_s.empty?
-      args = apply_connection_defaults args
-      @timeout = args[:timeout]
-      @open_timeout = args[:open_timeout]
-
-      # ensure an integer
-      args[:port] &&= args[:port].to_i
-
-      # confirm we know basics
-      verify_basic_args args
-
-      # parse our ssl situation
-      verify_ssl args
-
-      @user = args[:user]
-
-      @rest_url = build_rest_url args
-
-      # figure out :password from :pw
-      args[:password] = acquire_password args
-
-      # heres our connection
-      @cnx = create_connection args[:password]
-
-      verify_server_version
-
-      @name = "#{@user}@#{@server_host}:#{@port}" if @name.nil? || @name == :disconnected
-      @connected ? hostname : nil
-    end # connect
-
-    # A useful string about this connection
-    #
-    # @return [String]
-    #
-    def to_s
-      @connected ? "Using #{@rest_url} as user #{@user}" : 'not connected'
-    end
-
-    # Reset the response timeout for the rest connection
-    #
-    # @param timeout[Integer] the new timeout in seconds
-    #
-    # @return [void]
-    #
-    def timeout=(timeout)
-      @cnx.options[:timeout] = timeout
-    end
-
-    # Reset the open-connection timeout for the rest connection
-    #
-    # @param timeout[Integer] the new timeout in seconds
-    #
-    # @return [void]
-    #
-    def open_timeout=(timeout)
-      @cnx.options[:open_timeout] = timeout
-    end
-
-    # With a REST connection, there isn't any real "connection" to disconnect from
-    # So to disconnect, we just unset all our credentials.
-    #
-    # @return [void]
-    #
-    def disconnect
-      @user = nil
-      @rest_url = nil
-      @server_host = nil
-      @cnx = nil
-      @connected = false
-    end # disconnect
-
-    # Get a JSS resource
-    # The first argument is the resource to get (the part of the API url
-    # after the 'JSSResource/' ) The resource must be properly URL escaped
-    # beforehand. Note: URL.encode is deprecated, use CGI.escape
-    #
-    # By default we get the data in JSON, and parse it into a ruby Hash
-    # with symbolized Hash keys.
-    #
-    # If the second parameter is :xml then the XML version is retrieved and
-    # returned as a String.
-    #
-    # To get the raw JSON string as it comes from the API, pass raw_json: true
-    #
-    # @param rsrc[String] the resource to get
-    #   (the part of the API url after the 'JSSResource/' )
-    #
-    # @param format[Symbol] either ;json or :xml
-    #   If the second argument is :xml, the XML data is returned as a String.
-    #
-    # @param raw_json[Boolean] When GETting JSON, return the raw unparsed string
-    #   (the XML is always returned as a raw string)
-    #
-    # @return [Hash,String] the result of the get
-    #
-    def get_rsrc(rsrc, format = :json, raw_json: false)
-      validate_connected
-      raise JSS::InvalidDataError, 'format must be :json or :xml' unless GET_FORMATS.include? format
-
-      @last_http_response =
-        @cnx.get(rsrc) do |req|
-          req.headers[HTTP_ACCEPT_HEADER] = format == :json ? MIME_JSON : MIME_XML
-        end
-
-      unless @last_http_response.success?
-        handle_http_error
-        return
-      end
-
-      return JSON.parse(@last_http_response.body, symbolize_names: true) if format == :json && !raw_json
-
-      @last_http_response.body
-    end
-
-    # Update an existing JSS resource
-    #
-    # @param rsrc[String] the API resource being changed, the URL part after 'JSSResource/'
-    #
-    # @param xml[String] the xml specifying the changes.
-    #
-    # @return [String] the xml response from the server.
-    #
-    def put_rsrc(rsrc, xml)
-      validate_connected
-
-      # convert CRs & to &#13;
-      xml.gsub!(/\r/, '&#13;')
-
-      # send the data
-      @last_http_response =
-        @cnx.put(rsrc) do |req|
-          req.headers[HTTP_CONTENT_TYPE_HEADER] = MIME_XML
-          req.headers[HTTP_ACCEPT_HEADER] = MIME_XML
-          req.body = xml
-        end
-      unless @last_http_response.success?
-        handle_http_error
-        return
-      end
-
-      @last_http_response.body
-    end
-
-    # Create a new JSS resource
-    #
-    # @param rsrc[String] the API resource being created, the URL part after 'JSSResource/'
-    #
-    # @param xml[String] the xml specifying the new object.
-    #
-    # @return [String] the xml response from the server.
-    #
-    def post_rsrc(rsrc, xml)
-      validate_connected
-
-      # convert CRs & to &#13;
-      xml&.gsub!(/\r/, '&#13;')
-
-      # send the data
-      @last_http_response =
-        @cnx.post(rsrc) do |req|
-          req.headers[HTTP_CONTENT_TYPE_HEADER] = MIME_XML
-          req.headers[HTTP_ACCEPT_HEADER] = MIME_XML
-          req.body = xml
-        end
-      unless @last_http_response.success?
-        handle_http_error
-        return
-      end
-      @last_http_response.body
-    end # post_rsrc
-
-    # Delete a resource from the JSS
-    #
-    # @param rsrc[String] the resource to create, the URL part after 'JSSResource/'
-    #
-    # @return [String] the xml response from the server.
-    #
-    def delete_rsrc(rsrc)
-      validate_connected
-      raise MissingDataError, 'Missing :rsrc' if rsrc.nil?
-
-      # delete the resource
-      @last_http_response =
-        @cnx.delete(rsrc) do |req|
-          req.headers[HTTP_CONTENT_TYPE_HEADER] = MIME_XML
-          req.headers[HTTP_ACCEPT_HEADER] = MIME_XML
-        end
-
-      unless @last_http_response.success?
-        handle_http_error
-        return
-      end
-
-      @last_http_response.body
-    end # delete_rsrc
-
-    # Test that a given hostname & port is a JSS API server
-    #
-    # @param server[String] The hostname to test,
-    #
-    # @param port[Integer] The port to try connecting on
-    #
-    # @return [Boolean] does the server host a JSS API?
-    #
-    def valid_server?(server, port = SSL_PORT)
-      # cheating by shelling out to curl, because getting open-uri, or even net/http to use
-      # ssl_options like :OP_NO_SSLv2 and :OP_NO_SSLv3 will take time to figure out..
-      return true if `/usr/bin/curl -s 'https://#{server}:#{port}/#{TEST_PATH}'`.include? TEST_CONTENT
-      return true if `/usr/bin/curl -s 'http://#{server}:#{port}/#{TEST_PATH}'`.include? TEST_CONTENT
-
-      false
-    end
-
-    # The server to which we are connected, or will
-    # try connecting to if none is specified with the
-    # call to #connect
-    #
-    # @return [String] the hostname of the server
-    #
-    def hostname
-      return @server_host if @server_host
-
-      srvr = JSS::CONFIG.api_server_name
-      srvr ||= JSS::Client.jss_server
-      srvr
-    end
-    alias host hostname
-
-    # Empty all cached lists from this connection
-    # then run garbage collection to clear any available memory
-    #
-    # If an APIObject Subclass's RSRC_LIST_KEY is specified, only the caches
-    # for that class are flushed (e.g. :computers, :comptuer_groups)
-    #
-    # NOTE if you've referenced objects in these caches, those objects
-    # won't be removed from memory, but all cached data will be recached
-    # as needed.
-    #
-    # @param key[Symbol, Class] Flush only the caches for the given RSRC_LIST_KEY. or
-    #   the EAdef cache for the given extendable class. If nil (the default)
-    #   flushes all caches
-    #
-    # @return [void]
-    #
-    def flushcache(key = nil)
-      if EXTENDABLE_CLASSES.include? key
-        @ext_attr_definition_cache[key] = {}
-      elsif key
-        map_key_pfx = "#{key}_map_"
-        @object_list_cache.delete_if do |cache_key, _cache|
-          cache_key == key || cache_key.to_s.start_with?(map_key_pfx)
-        end
-        @ext_attr_definition_cache
-      else
-        @object_list_cache = {}
-        @ext_attr_definition_cache = {}
-      end
-
-      GC.start
-    end
-
-    # Remove the various cached data
-    # from the instance_variables used to create
-    # pretty-print (pp) output.
-    #
-    # @return [Array] the desired instance_variables
-    #
-    def pretty_print_instance_variables
-      vars = instance_variables.sort
-      vars.delete :@object_list_cache
-      vars.delete :@last_http_response
-      vars.delete :@network_ranges
-      vars.delete :@my_distribution_point
-      vars.delete :@master_distribution_point
-      vars.delete :@ext_attr_definition_cache
-      vars
-    end
-
-    # Private Insance Methods
-    ####################################
-    private
-
-    # raise exception if not connected
-    def validate_connected
-      raise JSS::InvalidConnectionError, "Connection '#{@name}' Not Connected. Use .connect first." unless connected?
-    end
-
-    # Apply defaults from the JSS::CONFIG,
-    # then from the JSS::Client,
-    # then from the module defaults
-    # to the args for the #connect method
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [Hash] The args with defaults applied
-    #
-    def apply_connection_defaults(args)
-      apply_defaults_from_config(args)
-      apply_defaults_from_client(args)
-      apply_module_defaults(args)
-    end
-
-    # Apply defaults from the JSS::CONFIG
-    # to the args for the #connect method
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [Hash] The args with defaults applied
-    #
-    def apply_defaults_from_config(args)
-      # settings from config if they aren't in the args
-      args[:server] ||= JSS::CONFIG.api_server_name
-      args[:port] ||= JSS::CONFIG.api_server_port
-      args[:user] ||= JSS::CONFIG.api_username
-      args[:timeout] ||= JSS::CONFIG.api_timeout
-      args[:open_timeout] ||= JSS::CONFIG.api_timeout_open
-      args[:ssl_version] ||= JSS::CONFIG.api_ssl_version
-
-      # if verify cert was not in the args, get it from the prefs.
-      # We can't use ||= because the desired value might be 'false'
-      args[:verify_cert] = JSS::CONFIG.api_verify_cert if args[:verify_cert].nil?
-      args
-    end # apply_defaults_from_config
-
-    # Apply defaults from the JSS::Client
-    # to the args for the #connect method
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [Hash] The args with defaults applied
-    #
-    def apply_defaults_from_client(args)
-      return unless JSS::Client.installed?
-
-      # these settings can come from the jamf binary config, if this machine is a JSS client.
-      args[:server] ||= JSS::Client.jss_server
-      args[:port] ||= JSS::Client.jss_port.to_i
-      args[:use_ssl] ||= JSS::Client.jss_protocol.to_s.end_with? 's'
-      args
-    end
-
-    # Apply the module defaults to the args for the #connect method
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [Hash] The args with defaults applied
-    #
-    def apply_module_defaults(args)
-      args[:port] = args[:server].to_s.end_with?(JAMFCLOUD_DOMAIN) ? JAMFCLOUD_PORT : SSL_PORT if args[:no_port_specified]
-      args[:timeout] ||= DFT_TIMEOUT
-      args[:open_timeout] ||= DFT_OPEN_TIMEOUT
-      args[:ssl_version] ||= DFT_SSL_VERSION
-      args
-    end
-
-    # Raise execeptions if we don't have essential data for the connection
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [void]
-    #
-    def verify_basic_args(args)
-      # must have server, user, and pw
-      raise JSS::MissingDataError, 'No JSS :server specified, or in configuration.' unless args[:server]
-      raise JSS::MissingDataError, 'No JSS :user specified, or in configuration.' unless args[:user]
-      raise JSS::MissingDataError, "Missing :pw for user '#{args[:user]}'" unless args[:pw]
-    end
-
-    # Verify that we can connect with the args provided, and that
-    # the server version is high enough for this version of ruby-jss.
-    #
-    # This makes the first API GET call and will raise an exception if things
-    # are wrong, like failed authentication. Will also raise an exception
-    # if the JSS version is too low
-    # (see also JSS::Server)
-    #
-    # @return [void]
-    #
-    def verify_server_version
-      @connected = true
-
-      # the jssuser resource is readable by anyone with a JSS acct
-      # regardless of their permissions.
-      # However, it's marked as 'deprecated'. Hopefully jamf will
-      # keep this basic level of info available for basic authentication
-      # and JSS version checking.
-      begin
-        data = get_rsrc('jssuser')
-      rescue JSS::AuthorizationError
-        raise JSS::AuthenticationError, "Incorrect JSS username or password for '#{@user}@#{@server_host}:#{@port}'."
-      end
-
-      @server = JSS::Server.new data[:user], self
-
-      min_vers = JSS.parse_jss_version(JSS::MINIMUM_SERVER_VERSION)[:version]
-      return if @server.version >= min_vers # we're good...
-
-      err_msg = "JSS version #{@server.raw_version} to low. Must be >= #{min_vers}"
-      @connected = false
-      raise JSS::UnsupportedError, err_msg
-    end
-
-    # Build the base URL for the API connection
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [String] The URI encoded URL
-    #
-    def build_rest_url(args)
-      @server_host = args[:server]
-      @port = args[:port].to_i
-
-      # trim any potential  leading slash on server_path, ensure a trailing slash
-      if args[:server_path]
-        @server_path = args[:server_path]
-        @server_path = @server_path[1..-1] if @server_path.start_with? '/'
-        @server_path << '/' unless @server_path.end_with? '/'
-      end
-
-      # we're using ssl if:
-      #  1) args[:use_ssl] is anything but false
-      # or
-      #  2) the port is a known ssl port.
-      args[:use_ssl] = args[:use_ssl] != false || SSL_PORTS.include?(@port)
-
-      @protocol = 'http'
-      @protocol << 's' if args[:use_ssl]
-      # and here's the URL
-      "#{@protocol}://#{@server_host}:#{@port}/#{@server_path}#{RSRC_BASE}"
-    end
-
-    # From whatever was given in args[:pw], figure out the real password
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [String] The password for the connection
-    #
-    def acquire_password(args)
-      if args[:pw] == :prompt
-        JSS.prompt_for_password "Enter the password for JSS user #{args[:user]}@#{args[:server]}:"
-      elsif args[:pw].is_a?(Symbol) && args[:pw].to_s.start_with?('stdin')
-        args[:pw].to_s =~ /^stdin(\d+)$/
-        line = Regexp.last_match(1)
-        line ||= 1
-        JSS.stdin line
-      else
-        args[:pw]
-      end
-    end
-
-    # Get the appropriate OpenSSL::SSL constant for
-    # certificate verification.
-    #
-    # @param args[Hash] The args for #connect
-    #
-    # @return [Type] description_of_returned_object
-    #
-    def verify_ssl(args)
-      # use SSL for SSL ports unless specifically told not to
-      if SSL_PORTS.include? args[:port]
-        args[:use_ssl] = true unless args[:use_ssl] == false
-      end
-      return unless args[:use_ssl]
-
-      # if verify_cert is anything but false, we will verify
-      args[:verify_ssl] = args[:verify_cert] != false
-
-      # ssl version if not specified
-      args[:ssl_version] ||= DFT_SSL_VERSION
-
-      @ssl_options = {
-        verify: args[:verify_ssl],
-        version: args[:ssl_version]
-      }
-    end
-
-    # Parses the @last_http_response
-    # and raises a JSS::APIError with a useful error message.
-    #
-    # @return [void]
-    #
-    def handle_http_error
-      return if @last_http_response.success?
-
-      case @last_http_response.status
-      when 404
-        err = JSS::NoSuchItemError
-        msg = 'Not Found'
-      when 409
-        err = JSS::ConflictError
-        @last_http_response.body =~ /<p>(The server has not .*?)(<|$)/m
-        Regexp.last_match(1) ||  @last_http_response.body =~ %r{<p>Error: (.*?)</p>}
-        msg = Regexp.last_match(1)
-      when 400
-        err = JSS::BadRequestError
-        @last_http_response.body =~ %r{>Bad Request</p>\n<p>(.*?)</p>\n<p>You can get technical detail}m
-        msg = Regexp.last_match(1)
-      when 401
-        err = JSS::AuthorizationError
-        msg = 'You are not authorized to do that.'
-      when (500..599)
-        err = JSS::APIRequestError
-        msg = 'There was an internal server error'
-      else
-        err = JSS::APIRequestError
-        msg = "There was a error processing your request, status: #{@last_http_response.status}"
-      end
-      raise err, msg
-    end
-
-    # create the faraday connection object
-    def create_connection(pw)
-      Faraday.new(@rest_url, ssl: @ssl_options) do |cnx|
-        cnx.basic_auth @user, pw
-        cnx.options[:timeout] = @timeout
-        cnx.options[:open_timeout] = @open_timeout
-        cnx.adapter Faraday::Adapter::NetHttp
-      end
-    end
-
-  end # class APIConnection
-
-  # JSS MODULE METHODS
-  ######################
-
-  # Create a new APIConnection object and use it for all
-  # future API calls. If connection options are provided,
-  # they are passed to the connect method immediately, otherwise
-  # JSS.api.connect must be called before attemting to use the
-  # connection.
-  #
-  # @param (See JSS::APIConnection#connect)
-  #
-  # @return [APIConnection] the new, active connection
-  #
-  def self.new_api_connection(args = {})
-    args[:name] ||= :default
-    @api = APIConnection.new args
-  end
-
-  # Switch the connection used for all API interactions to the
-  # one provided. See {JSS::APIConnection} for details and examples
-  # of using multiple connections
-  #
-  # @param connection [APIConnection] The APIConnection to use for future
-  #   API calls. If omitted, use the default connection created when ruby-jss
-  #   was loaded (which may or may not yet be connected)
-  #
-  # @return [APIConnection] The connection now being used.
-  #
-  def self.use_api_connection(connection)
-    raise 'API connections must be instances of JSS::APIConnection' unless connection.is_a? JSS::APIConnection
-
-    @api = connection
-  end
-
-  # Make the default connection (Stored in JSS::API) active
-  #
-  # @return [void]
-  #
-  def self.use_default_connection
-    use_api_connection @api
-  end
-
-  # The currently active JSS::APIConnection instance.
-  #
-  # @return [JSS::APIConnection]
-  #
-  def self.api
-    @api ||= APIConnection.new name: :default
-  end
-
-  # aliases of module methods
-  class << self
-
-    alias api_connection api
-    alias connection api
-    alias active_connection api
-
-    alias new_connection new_api_connection
-    alias new_api new_api_connection
-
-    alias use_api use_api_connection
-    alias use_connection use_api_connection
-    alias activate_connection use_api_connection
-
-  end
-
-  # create the default connection
-  new_api_connection unless @api
-
-  # Save the default connection in the API constant,
-  # mostly for backward compatibility.
-  API = @api unless defined? API
-
-end # module