ruby-jss 1.6.0 → 2.0.0a11

data/lib/jamf/api/connection.rb

@@ -1,525 +1,212 @@
-# Copyright 2020 Pixar
-
-#
-#    Licensed under the Apache License, Version 2.0 (the "Apache License")
-#    with the following modification; you may not use this file except in
-#    compliance with the Apache License and the following modification to it:
-#    Section 6. Trademarks. is deleted and replaced with:
-#
-#    6. Trademarks. This License does not grant permission to use the trade
-#       names, trademarks, service marks, or product names of the Licensor
-#       and its affiliates, except as required to comply with Section 4(c) of
-#       the License and to reproduce the content of the NOTICE file.
-#
-#    You may obtain a copy of the Apache License at
-#
-#        http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the Apache License with the above modification is
-#    distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-#    KIND, either express or implied. See the Apache License for the specific
-#    language governing permissions and limitations under the Apache License.
+### Copyright 2022 Pixar
+###
+###    Licensed under the Apache License, Version 2.0 (the "Apache License")
+###    with the following modification; you may not use this file except in
+###    compliance with the Apache License and the following modification to it:
+###    Section 6. Trademarks. is deleted and replaced with:
+###
+###    6. Trademarks. This License does not grant permission to use the trade
+###       names, trademarks, service marks, or product names of the Licensor
+###       and its affiliates, except as required to comply with Section 4(c) of
+###       the License and to reproduce the content of the NOTICE file.
+###
+###    You may obtain a copy of the Apache License at
+###
+###        http://www.apache.org/licenses/LICENSE-2.0
+###
+###    Unless required by applicable law or agreed to in writing, software
+###    distributed under the Apache License with the above modification is
+###    distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+###    KIND, either express or implied. See the Apache License for the specific
+###    language governing permissions and limitations under the Apache License.
+###
+###
 
 require 'faraday' # >= 0.17.0
 require 'faraday_middleware' # >= 0.13.0
 
-# The module
+# The main module
 module Jamf
 
-  # Changes from classic Jamf::APIconnection
-  #   - uses Faraday as the REST engine
-  #   - accepts a url with connect/initialize
-  #   - only supports https, no http
-  #   - no xml
-  #   - tokens & keep_alive
-  #   - no object class method wrappers in connection objects,
-  #     only passing connection objects into the class methods
+  # Instances of this class represent a connection to a Jamf Pro server, using
+  # both the Classic and Jamf Pro APIs.
+  #
+  # For most cases, a single connection to a single JSS is all you need, and
+  # ruby-jss automatically creates and uses a default connection. See
+  # {JSS.connect}
+  #
+  # If needed, multiple connection objects can be made and used sequentially or
+  # simultaneously.
+  #
+  # NOTE: Individual connection instances are not thread-safe and should not be
+  # shared by multple simultaneous threads (such as with a multi-threaded http
+  # server like 'thin') or used for concurrent API access. In those cases, do not
+  # use the default connection, but be sure to design your application to create
+  # different API connections for each thread, and pass them into method calls as
+  # needed
+  #
+  # == Using the default connection
+  #
+  # When ruby-jss is loaded, a not-yet-connected default instance of
+  # Jamf::Connection is created and available using {JSS.cnx}.
+  #
+  # This connection is used as the initial default connection so all methods
+  # that make API calls will use it by default.
+  # For most uses where you're only going to be working with one connection to
+  # one JSS, the default connection is all you need.
+  #
+  # Before using it you must call its {#connect} method, passing in appropriate
+  # connection details and credentials.
+  #
+  # Example:
+  #
+  #    require 'ruby-jss'
+  #    JSS.cnx.connect host: 'server.address.edu', user: 'jss-api-user', pw: :prompt
+  #    # (see {Jamf::Connection#connect} for all the connection options)
+  #
+  #    a_phone = Jamf::MobileDevice.fetch id: 8743
+  #
+  #    # the mobile device was fetched through the default connection
+  #
+  # If needed, you can re-login to the default connection by calling JSS.connect
+  # with new connection parameters. You can also call JSS.disconnect to close the
+  # connection
+  #
+  # == Using standalone Connections
+  #
+  # Sometimes you need to connect simultaneously to more than one JSS.
+  # or to the same JSS with different credentials, or you just need multiple
+  # concurrent connections for asyncronous, thread-safe use. ruby-jss allows you
+  # to create as many connections as needed, and pass them into the methods that
+  # communication with the API via the `cnx:` parameter (the older `api:`
+  # parameter is deprecated and will eventually not be recognized)
+  #
+  #  Example:
+  #    my_connection = Jamf::Connection.new(params: go, in: here)
+  #    a_computer = Jamf::Computer.fetch id: 1234, cnx: my_connection
+  #
+  #    # the Jamf::Computer with id 1234 is fetched from the connection
+  #    # stored in the variable 'my_connection'. The computer is
+  #    # then stored in the variable 'a_computer'
+  #
+  # NOTE:
+  # When an obbject is retrieved or created it stores an internal
+  # reference to the Connection object that it usdd, and uses that when making
+  # future API calls.
+  # So in the example above, when saving any changes to a_computer, the Connection
+  # object 'my_connection' will (and must) be used.
+  #
+  # Similiarly, each Connection object maintains its own caches for the data
+  # used by the `list` methods (e.g. Jamf::Computer.all, .all_names, and so on)
+  #
+  # == Making new APIConnection instances
+  #
+  # New connections can be created using the standard ruby 'new' method.
+  #
+  # If you provide connection details when calling 'new', they will be passed
+  # to the {#connect} method immediately. Otherwise you can call {#connect} later.
+  #
+  #   production_api = Jamf::Connection.new(
+  #     'https://produser@prodserver.address.org:8443/'
+  #     name: 'prod',
+  #     pw: :prompt
+  #   )
+  #
+  #   # the new connection is now stored in the variable 'production_api'.
+  #
+  # == Passing an APIConnection object to API-related methods
+  #
+  # All methods that use the API can take an 'cnx:' parameter which
+  # takes a Connection object. When provided, that connection is
+  # used rather than the active connection. The older, deprecated synonym 'api:'
+  # will eventually be removed.
+  #
+  # For example:
+  #
+  #   prod2_computer_sns = Jamf::Computer.all_serial_numbers, cnx: production_api2
+  #
+  #   # the list of all computer serial numbers is read from the connection in
+  #   # the variable 'production_api2' and stored in 'prod2_computer_sns'
+  #
+  #   prod2_victim_md = Jamf::MobileDevice.fetch id: 832, cnx: production_api2
+  #
+  #   # the variable 'prod2_victim_md' now contains a Jamf::MobileDevice queried
+  #   # through the connection 'production_api2'.
+  #
+  # == Low-level use of Connection instances.
+  #
+  # For most cases, using Connection instances as mentioned above
+  # is all you'll need. However to access API resources that aren't yet
+  # implemented in other parts of ruby-jss, you can use the methods
+  # {#c_get}, {#c_put}, {#c_post}, {#c_delete} for accessing the Classic API
+  # and {#jp_get}, {#jp_post}, {#jp_put}, {#jp_patch}, {#jp_delete} for
+  # accessing the Jamf Pro API
+  #
+  # For even lower-level work, you can access the underlying Faraday::Connection
+  # objects via the connection's {#c_cnx} and {#jp_cnx}
+  # attributes.
+  #
   #
   class Connection
 
-    # Class Constants
-    #####################################
-
-    # The start of the path for API resources
-    RSRC_BASE = 'api'.freeze
-
-    # The JamfPro version must be this or higher
-    MIN_JAMF_VERSION = Gem::Version.new('10.25.0')
-
-    HTTPS_SCHEME = 'https'.freeze
-
-    # The https default SSL port, default for Jamf Cloud servers
-    HTTPS_SSL_PORT = 443
-
-    # The Jamf default SSL port, default for on-prem servers
-    ON_PREM_SSL_PORT = 8443
-
-    # if either of these is specified, we'll default to SSL
-    SSL_PORTS = [ON_PREM_SSL_PORT, HTTPS_SSL_PORT].freeze
-
-    # Recognize Jamf Cloud servers
-    JAMFCLOUD_DOMAIN = '.jamfcloud.com'.freeze
-
-    # JamfCloud connections default to 443, not 8443
-    JAMFCLOUD_PORT = HTTPS_SSL_PORT
-
-    # Default open-connection timeout in seconds
-    DFT_OPEN_TIMEOUT = 60
-
-    # Default response timeout in seconds
-    DFT_TIMEOUT = 60
-
-    # The Default SSL Version
-    DFT_SSL_VERSION = 'TLSv1_2'.freeze
-
-    # refresh token if less than this many seconds until
-    # expiration. Default is 5 minutes if not specified
-    DFT_TOKEN_REFRESH = 300
-
-    # pre-existing tokens must have this many seconds before
-    # before they expire
-    TOKEN_REUSE_MIN_LIFE = 60
-
-    HTTP_ACCEPT_HEADER = 'Accept'.freeze
-
-    HTTP_CONTENT_TYPE_HEADER = 'Content-Type'.freeze
-
-    MIME_JSON = 'application/json'.freeze
-
-    SLASH = '/'.freeze
-
-    VALID_URL_REGEX = /\A#{URI.regexp(%w[https])}\z/.freeze
-
-    NOT_CONNECTED = 'Not Connected'.freeze
-
-    # Only these variables are displayed with PrettyPrint
-    # This avoids, especially, the caches, which are available
-    # as attr_readers
-    PP_VARS = %i[
-      @name
-      @connected
-      @host
-      @port
-      @user
-      @base_url
-      @ssl_options
-      @open_timeout
-      @timeout
-      @login_time
-      @keep_alive
-      @token_refresh
-      @pw_fallback
-    ].freeze
-
-    # Attributes
-    #####################################
-
-    # @return [String, nil]
-    attr_reader :name
-
-    # @return [String, nil]
-    attr_reader :host
-
-    # @return [Integer, nil]
-    attr_reader :port
-
-    # @return [String, nil]
-    attr_reader :user
-
-    # @return [Integer, nil]
-    attr_reader :timeout
-
-    # @return [Jamf::Connection::Token, nil]
-    attr_reader :token
-
-    # @return [Integer] Refresh the token this many seconds before it expires
-    attr_reader :token_refresh
-
-    # @return [String, nil]
-    attr_reader :base_url
-
-    # @return [Boolean] if token refresh/keepaliave fails, try to get a new one
-    # with the passwd used with .connect. Defaults to true
-    attr_reader :pw_fallback
-
-    # @return [Boolean]
-    attr_reader :connected
-    alias connected? connected
-
-    # @return [RestClient::Resource] the underlying rest resource
-    attr_reader :rest_cnx
-
-    # when was this connection logged in?
-    attr_reader :login_time
-
-    # @return [Hash]
-    # This Hash holds the most recently fetched instance of a SingletonResource
-    # subclass, keyed by the subclass itself.
-    #
-    # SingletonResource.fetch will return the instance from here, if it exists,
-    # unless the first parameter is truthy.
-    attr_reader :singleton_cache
-
-    # @return [Hash]
-    # This Hash holds the most recent API data (an Array of Hashes) for the list
-    # of all items in a CollectionResource subclass, keyed by the subclass itself.
-    #
-    # CollectionResource.all return the appropriate data from here, if it exists,
-    #
-    # See the CollectionResource.all class method.
-    attr_reader :collection_cache
-
-    # @return [Hash]
-    # This hash holds ExtensionAttribute instances, which are used
-    # for validating values passed to Extendable.set_ext_attr.
-    attr_reader :ext_attr_cache
-
-    # @return [Faraday::Response] The response object from the last API access.
-    attr_reader :last_http_response
+    # the code for this class is broken into multiple files
+    # as modules, to play will with the zeitwerk loader
+    include Jamf::Connection::Constants
+    include Jamf::Connection::Attributes
+    include Jamf::Connection::Cache
+    include Jamf::Connection::Connect
+    include Jamf::Connection::ClassicAPI
+    include Jamf::Connection::JamfProAPI
 
     # Constructor
     #####################################
 
-    # @see #connect
-    def initialize(url = nil, **params)
-      @name = params.delete :name
-      @name ||= NOT_CONNECTED
-
-      @singleton_cache = {}
-      @collection_cache = {}
-      @ext_attr_cache = {}
-
-      connect(url, params) unless params[:do_not_connect]
-    end
-
-    # Public Instance Methods
-    #####################################
-
-    # Connect this Connection object to an Jamf Pro API
-    #
-    # The first parameter may be a URL (must be https) from which
-    # the host & port will be used, and if present, the user and password
-    # E.g.
-    #   connect 'https://myuser:pass@host.domain.edu:8443'
-    #
-    # which is the same as:
-    #   connect host: 'host.domain.edu', port: 8443, user: 'myuser', pw: 'pass'
-    #
-    # When using a URL, other parameters below may be specified, however
-    # host: and port: parameters will be ignored, since they came from the URL,
-    # as will user: and :pw, if they are present in the URL. If the URL doesn't
-    # contain user and pw, they can be provided via the parameters, or left
-    # to default values.
-    #
-    # ### Passwords
-    # The pw: parameter also accepts the symbols :prompt, and :stdin[X]
-    #
-    # If :prompt, the user is promted on the commandline to enter the password
-    # for the :user.
-    #
-    # If :stdin the password is read from the first line of stdin
-    #
-    # If :stdinX (where X is an integer) the password is read from the Xth
-    # line of stdin.see {Jamf.stdin}
-    #
-    # If omitted, and running from an interactive terminal, the user is
-    # prompted as with :prompt
-    #
-    # ### Tokens
-    # Instead of a user and password, you may specify a valid 'token:', either:
-    #
-    # A Jamf::Connection::Token object, which can be extracted from an active
-    # Jamf::Connection via its #token method
-    #
-    # or
-    #
-    # A token string e.g. "eyJhdXR...6EKoo" from any source can also be used.
-    #
-    # Any values available via Jamf.config will be used if they are not provided
-    # in the parameters.
-    #
-    # @param host: [String] The API server hostname. The param 'server:' is a
-    #   synonym
-    #
-    # @param port: [Integer] The API server port. If omitted, the value from
-    #   Jamf.config will be used. If no config value, defaults to 443 if the
-    #   host ends with 'jamfcloud.com' or 8443 otherwise
-    #
-    # @param user: [String] The username for the API connection
-    #
-    # @param pw: [String, Symbol] The password for the user, :prompt, or :stdin[X]
+    # Instantiate a connection object.
     #
-    # @param token: [Jamf::Connection::Token, String] An existing, valid token.
-    #   When used, there's no need to provide user: or pw:.
-    #   NOTE if using pw_fallback:true (the default) while providing a token
-    #   you will also need to provide the password for the token user in the pw:
-    #   parameter, or be prompted for it. If you don't have the pw for the
-    #   token user, be sure to set pw_fallback to false.
+    # If name: is provided it will be stored as the Connection's name attribute.
     #
-    # @param token_refresh: [Integer] Refresh the token this many seconds before
-    #   it expires. Must be >= DFT_TOKEN_REFRESH
+    # if no url is provided and params are empty, or contains only
+    # a :name key, then you must call #connect with all the connection
+    # parameters before accessing a server.
     #
-    # @pararm pw_fallback: [Boolean] Default is true. Use the password provided
-    #   to refresh the token if regular refresh doesn't work (e.g. token is expired).
-    #   NOTE: This causes the password to be kept in memory. If you don't want
-    #   this, explicitly set pw_fallback to false, however long-running processes
-    #   may lose connection if token refresh fails for any reason.
+    # See {#connect} for the parameters
     #
-    # @param open_timeout: [Integer] The number of seconds for initial contact
-    #   with the host.
-    #
-    # @param timeout: [Integer] The number of seconds for a full response from
-    #   the host.
-    #
-    # @param ssl_version: [Symbol] The SSL version, e.g. :TLSv1_2
-    #
-    # @param verify_cert: [Boolean] Should the SSL certificate be verified?
-    #   Default is true, should only be set to false if using a on-prem
-    #   server with a self-signed certificate, which is rare
-    #
-    def connect(url = nil, **params)
-      # This sets all the instance vars to nil, and flushes/creates the caches
-      disconnect
-
-      # If there's a Token object in :token, this sets @token,
-      # and adds host, port, user from that token
-      parse_token params
-
-      # Get host, port, user and pw from a URL, add to params if needed
-      parse_url url, params
-
-      # apply defaults from config, client, and then this class.
-      apply_connection_defaults params
-
-      # Once we're here, all params have been parsed & defaulted into the
-      # params hash, so
-      # make sure we have the minimum needed params for a connection
-      verify_basic_params params
-
-      # turn the params into instance vars
-      parse_connect_params params
-
-      # if no @token already, get one from from
-      # either a token string or a pw
-      unless @token
-        if params[:token].is_a? String
-          @token = token_from :token_string, params[:token]
-          # get the user from the token
-          @user = @toke.user
-          # if @pw_fallback, the pw must be acquired, since it isn't in
-          # the token
-          @pw = acquire_password(params[:pw]) if @pw_fallback
-        else
-          pw = acquire_password(params[:pw])
-          @token = token_from :pw, pw
-          @pw = pw if @pw_fallback
-        end
-      end
-
-      # Now get some values from our token
-      @base_url = @token.base_url
-      @login_time = @token.login_time
-
-      # and make our actual connection
-      @rest_cnx = create_connection
-
-      # make sure versions are good
-      validate_jamf_version
-
-      @connected = true
-
-      # start keepalive if needed
-      start_keep_alive if @keep_alive
-
-      # return our string output
-      to_s
-    end # connect
-
-    # reset all values to nil or empty
-    def disconnect
+    def initialize(url = nil, **params)
+      @name = params.delete :name
       @connected = false
-      @name = NOT_CONNECTED
-      @login_time = nil
 
-      stop_keep_alive
+      # initialize the data caches
+      # see cache.rb
+      @c_object_list_cache = {}
+      @c_ext_attr_definition_cache = {}
+      # @jp_singleton_cache = {}
+      # @jp_collection_cache = {}
+      # @jp_ext_attr_cache = {}
 
-      @host = nil
-      @port = nil
-      @user = nil
-      @timeout = nil
-      @open_timeout = nil
-      @base_url = nil
-      @token = nil
-      @rest_cnx = nil
-      @ssl_options = {}
-      @keep_alive = nil
-      @token_refresh = nil
-      @pw_fallback = nil
-      @pw = nil
-
-      flushcache
-    end
+      return if url.nil? && params.empty?
 
-    # Same as disconnect, but invalidates the token on the server first
-    def logout
-      @token.destroy
-      disconnect
-    end
-
-    # Get a resource
-    def get(rsrc)
-      validate_connected
-      resp = @rest_cnx.get rsrc
-      @last_http_response = resp
-      return resp.body if resp.success?
-
-      raise Jamf::Connection::APIError, resp
-    end
+      connect url, **params
+    end # init
 
-    # GET a rsrc without doing any JSON parsing, using
-    # a temporary Faraday connection object
-    def download(rsrc)
-      temp_cnx = create_connection(false)
-      resp = temp_cnx.get rsrc
-      @last_http_response = resp
-      return resp.body if resp.success?
-
-      raise Jamf::Connection::APIError, resp
-    end
-
-    def post(rsrc, data)
-      validate_connected
-      resp = @rest_cnx.post(rsrc) do |req|
-        req.body = data
-      end
-      @last_http_response = resp
-      return resp.body if resp.success?
-
-      raise Jamf::Connection::APIError, resp
-    end
-
-    def put(rsrc, data)
-      validate_connected
-      resp = @rest_cnx.put(rsrc) do |req|
-        req.body = data
-      end
-      @last_http_response = resp
-      return resp.body if resp.success?
-
-      raise Jamf::Connection::APIError, resp
-    end
-
-    def patch(rsrc, data)
-      validate_connected
-      resp = @rest_cnx.patch(rsrc) do |req|
-        req.body = data
-      end
-      @last_http_response = resp
-      return resp.body if resp.success?
-
-      raise Jamf::Connection::APIError, resp
-    end
-
-    def delete(rsrc)
-      validate_connected
-      resp = @rest_cnx.delete rsrc
-      @last_http_response = resp
-      return resp.body if resp.success?
-
-      raise Jamf::Connection::APIError, resp
-    end
+    # Instance methods
+    #####################################
 
     # A useful string about this connection
     #
     # @return [String]
     #
     def to_s
-      str =
-        if connected?
-          "#{@base_url}, Token expires: #{@token ? @token.expires : '<token missing>'}"
-        else
-          NOT_CONNECTED
-        end
-      "Jamf::Connection '#{@name == NOT_CONNECTED ? object_id : @name}': #{str}"
-    end
-
-    # Reset the name
-    def name=(new_name)
-      @name = new_name.to_s
-    end
-
-    # Are we keeping the connection alive?
-    def keep_alive?
-      return false unless @keep_alive_thread
-
-      @keep_alive_thread.alive?
-    end
-
-    # @return [Jamf::Timestamp, nil]
-    def next_refresh
-      return unless keep_alive?
-
-      @token.expires - @token_refresh
-    end
-
-    # @return [Float, nil]
-    def secs_to_refresh
-      return unless keep_alive?
-
-      next_refresh - Time.now
-    end
-
-    # @return [String, nil] e.g. "1 week 6 days 23 hours 49 minutes 56 seconds"
-    def time_to_refresh
-      return unless keep_alive?
-      return 0 if secs_to_refresh.negative?
-
-      Jamf.humanize_secs secs_to_refresh
-    end
-
-    # Turn keepalive on or offs
-    def keep_alive=(bool)
-      bool ? start_keep_alive : stop_keep_alive
-    end
-
-    # This should take effect even if we're already running the keep_alive thread
-    #
-    def token_refresh=(secs)
-      raise ArgumentError, 'Value must be an Integer number of seconds' unless secs.is_a? Integer
-
-      @token_refresh = secs
-    end
+      return 'not connected' unless connected?
 
-    def jamf_version
-      @token.jamf_version
-    end
-
-    def jamf_build
-      @token.jamf_build
-    end
-
-    # Flush the collection and/or ea cache for the given class,
-    # or all cached data
-    # @param klass[Class] the class of cache to flush
-    #
-    # @return [void]
-    #
-    def flushcache(klass = nil)
-      if klass
-        @collection_cache.delete klass
-        @singleton_cache.delete klass
-        @ext_attr_cache.delete klass
+      if name.to_s.start_with? "#{user}@"
+        name
       else
-        @collection_cache = {}
-        @singleton_cache = {}
-        @ext_attr_cache = {}
+        "#{user}@#{host}:#{port}, name: #{name}"
       end
     end
 
-    # Remove large cached items from
-    # the instance_variables used to create
-    # pretty-print (pp) output.
+    # Only selected items are displayed with prettyprint
+    # otherwise its too much data in irb.
     #
     # @return [Array] the desired instance_variables
     #
@@ -527,341 +214,21 @@ module Jamf
       PP_VARS
     end
 
-    # Private Insance Methods
-    ####################################
-    private
-
-    # raise exception if not connected
-    def validate_connected
-      raise Jamf::InvalidConnectionError, 'Not Connected. Use .connect first.' unless connected?
-    end
-
-    # raise exception if API version is too low.
-    def validate_jamf_version
-      vers = jamf_version
-      return if Gem::Version.new(vers) >= MIN_JAMF_VERSION
-
-      raise Jamf::InvalidConnectionError, "API version '#{vers}' too low, must be >= '#{MIN_JAMF_VERSION}'"
-    end
-
-    #####  Parse Params
-    ###################################
-
-    # Get host, port, & user from a Token object
-    # or just the user from a token string.
-    def parse_token(params)
-      return unless params[:token].is_a? self.class::Token
-
-      verify_token params[:token]
-      @token = params[:token]
-      params[:host] = @token.host
-      params[:port] = @token.port
-      params[:user] = @token.user
-    end
-
-    # Raise execeptions if we were given an unusable token object
-    #
-    # @param params[Hash] The params for #connect
-    #
-    # @return [void]
-    #
-    def verify_token(token)
-      raise 'Cannot use token: it has expired' if token.expired?
-      raise 'Cannot use token: it is invalid' unless token.valid?
-      raise "Cannot use token: it expires in less than #{TOKEN_REUSE_MIN_LIFE} seconds" if token.secs_remaining < TOKEN_REUSE_MIN_LIFE
-    end
-
-    # Get host, port, user and pw from a URL, overriding any already in the params
-    #
-    # @return [String, nil] the pw if present
-    #
-    def parse_url(url, params)
-      return unless url
-
-      url = URI.parse url.to_s
-      raise ArgumentError, 'Invalid url, scheme must be https' unless url.scheme == HTTPS_SCHEME
-
-      params[:host] = url.host
-      params[:port] = url.port
-      params[:user] = url.user if url.user
-      params[:pw] = url.password if url.password
-    end
-
-    # Apply defaults to the unset params for the #connect method
-    # First apply them from from the Jamf.config,
-    # then from the Jamf::Client (read from the jamf binary config),
-    # then from the Jamf module defaults
-    #
-    # @param params[Hash] The params for #connect
-    #
-    # @return [Hash] The params with defaults applied
-    #
-    def apply_connection_defaults(params)
-      # must have a host, but accept legacy :server as well as :host
-      params[:host] ||= params[:server]
-
-      # if we have no port set by this point, set to cloud port
-      # if host is a cloud host. But leave port nil for other hosts
-      # (will be set via client defaults or module defaults)
-      params[:port] ||= JAMFCLOUD_PORT if params[:host].to_s.end_with?(JAMFCLOUD_DOMAIN)
-
-      apply_defaults_from_config(params)
-
-      # TODO: when clients are moved over to Jamf module
-      # apply_defaults_from_client(params)
-
-      apply_module_defaults(params)
-    end
-
-    # Apply defaults from the Jamf.config
-    # to the params for the #connect method
-    #
-    # @param params[Hash] The params for #connect
-    #
-    # @return [Hash] The params with defaults applied
-    #
-    def apply_defaults_from_config(params)
-      # settings from config if they aren't in the params
-      params[:host] ||= Jamf.config.api_server_name
-      params[:port] ||= Jamf.config.api_server_port
-      params[:user] ||= Jamf.config.api_username
-      params[:timeout] ||= Jamf.config.api_timeout
-      params[:open_timeout] ||= Jamf.config.api_timeout_open
-      params[:ssl_version] ||= Jamf.config.api_ssl_version
-
-      # if verify cert was not in the params, get it from the prefs.
-      # We can't use ||= because the desired value might be 'false'
-      params[:verify_cert] = Jamf.config.api_verify_cert if params[:verify_cert].nil?
-    end # apply_defaults_from_config
-
-    # Apply defaults from the Jamf::Client
-    # to the params for the #connect method
-    #
-    # @param params[Hash] The params for #connect
-    #
-    # @return [Hash] The params with defaults applied
-    #
-    def apply_defaults_from_client(params)
-      return unless Jamf::Client.installed?
-
-      # these settings can come from the jamf binary config,
-      # if this machine is a Jamf client.
-      params[:host] ||= Jamf::Client.jss_server
-      params[:port] ||= Jamf::Client.jss_port.to_i
-    end
-
-    # Apply the module defaults to the params for the #connect method
-    #
-    # @param params[Hash] The params for #connect
-    #
-    # @return [Hash] The params with defaults applied
-    #
-    def apply_module_defaults(params)
-      # if we have no port set by this point, assume on-prem.
-      params[:port] ||= ON_PREM_SSL_PORT
-      params[:timeout] ||= DFT_TIMEOUT
-      params[:open_timeout] ||= DFT_OPEN_TIMEOUT
-      params[:ssl_version] ||= DFT_SSL_VERSION
-      params[:token_refresh] ||= DFT_TOKEN_REFRESH
-      # if we have a TTY, pw defaults to :prompt
-      params[:pw] ||= :prompt if STDIN.tty?
-    end
-
-    # Raise execeptions if we don't have essential data for a new connection
-    # namely a host, user, and pw
-    # @param params[Hash] The params for #connect
-    #
-    # @return [void]
-    #
-    def verify_basic_params(params)
-      # if given a Token object, it has host, port, user, and base_url
-      # and is already parsed
-      return if @token
-
-      # must have a host
-      raise Jamf::MissingDataError, 'No Jamf :host specified, or in configuration.' unless params[:host]
-
-      # no need for user or pass if using a token string
-      return if params[:token].is_a? String
-
-      # must have user and pw
-      raise Jamf::MissingDataError, 'No Jamf :user specified, or in configuration.' unless params[:user]
-      raise Jamf::MissingDataError, "No :pw specified for user '#{params[:user]}'" unless params[:pw]
-    end
-
-    # Turn the connection parameters into instance vars
-    def parse_connect_params(params)
-      @host = params[:host]
-      @port = params[:port]
-      @user = params[:user]
-
-      @keep_alive = params[:keep_alive].nil? ? false : params[:keep_alive]
-      @pw_fallback = params[:pw_fallback].nil? ? true : params[:pw_fallback]
-      @token_refresh = params[:token_refresh].to_i
-
-      @timeout = params[:timeout]
-      @open_timeout = params[:open_timeout]
-
-      # TEMPORARY ? the tryitout host still uses `uapi` rather than the
-      # new `api` for regular servers
-      rsrc_base = @host == Token::JAMF_TRYITOUT_HOST ? 'uapi' : RSRC_BASE
-      @base_url = URI.parse "https://#{@host}:#{@port}/#{rsrc_base}"
-
-      # ssl opts for faraday
-      # TODO: implement all of faraday's options
-      @ssl_options = {
-        verify: params[:verify_cert],
-        version: params[:ssl_version]
-      }
-
-      @name = "#{@user}@#{@host}:#{@port}" if @name == NOT_CONNECTED
-    end
-
-    # given a token string or a password, get a valid token
-    # Token.new will raise an exception if the token string or
-    # credentials are invalid
-    def token_from(type, data)
-      token_params = {
-        user: @user,
-        base_url: @base_url,
-        timeout: @timeout,
-        ssl_options: @ssl_options
-      }
-
-      case type
-      when :token_string
-        token_params[:token_string] = data
-      when :pw
-        token_params[:pw] = data
-      end
-      self.class::Token.new token_params
-    end
-
-    # From whatever was given in params[:pw], figure out the password to use
-    #
-    # @param params[Hash] The params for #connect
-    #
-    # @return [String] The password for the connection
-    #
-    def acquire_password(param_pw)
-      pw =
-        if param_pw == :prompt
-          Jamf.prompt_for_password "Enter the password for Jamf user #{@user}@#{@host}:"
-        elsif param_pw.is_a?(Symbol) && param_pw.to_s.start_with?('stdin')
-          param_pw.to_s =~ /^stdin(\d+)$/
-          line = Regexp.last_match(1)
-          line ||= 1
-          Jamf.stdin line
-        else
-          param_pw
-        end # if
-      pw
-    end # acquire pw
-
-    # create the faraday connection object
-    def create_connection(parse_json = true)
-      Faraday.new(@base_url, ssl: @ssl_options) do |cnx|
-        cnx.headers[HTTP_ACCEPT_HEADER] = MIME_JSON
-        cnx.headers[:authorization] = @token.auth_token
-        cnx.request :json if parse_json
-        cnx.response :json, parser_options: { symbolize_names: true } if parse_json
-        cnx.options[:timeout] = @timeout
-        cnx.options[:open_timeout] = @open_timeout
-        cnx.adapter Faraday::Adapter::NetHttp
-      end
+    # @deprecated, use .token.next_refresh
+    def next_refresh
+      @token.next_refresh
     end
 
-    # creates a thread that loops forever, sleeping most of the time, but
-    # waking up every 60 seconds to see if the token is expiring in the
-    # next @token_refresh seconds.
-    #
-    # If so, the token is refreshed, and we keep looping and sleeping.
-    #
-    # Sets @keep_alive_thread to the Thread object
-    #
-    # @return [void]
-    #
-    def start_keep_alive
-      return if @keep_alive_thread
-      raise 'Token expired' if @token.expired?
-
-      @keep_alive_thread =
-        Thread.new do
-          loop do
-            sleep 60
-            begin
-              next if @token.secs_remaining > @token_refresh
-
-              @token.refresh @pw
-              # make sure faraday uses the new token
-              @rest_cnx.headers[:authorization] = @token.auth_token
-            rescue
-              # TODO: Some kind of error reporting
-              next
-            end
-          end # loop
-        end # thread
+    # @deprecated, use .token.secs_to_refresh
+    def secs_to_refresh
+      @token.secs_to_refresh
     end
 
-    # Kills the @keep_alive_thread, if it exists, and sets
-    # @keep_alive_thread to nil
-    #
-    # @return [void]
-    #
-    def stop_keep_alive
-      return unless @keep_alive_thread
-
-      @keep_alive_thread.kill if @keep_alive_thread.alive?
-      @keep_alive_thread = nil
+    # @deprecated, use .token.time_to_refresh
+    def time_to_refresh
+      @token.time_to_refresh
     end
 
   end # class Connection
 
-  # Jamf module methods dealing with the active connection
-  ########################################################
-
-  # @return [Jamf::Connection] the active connection
-  #
-  def self.cnx
-    @active_connection ||= Connection.new do_not_connect: true
-  end
-
-  # Create a new Connection object and use it as the active_connection,
-  # replacing the current active_connection. If connection options are provided,
-  # they are passed to the connect method immediately, otherwise
-  # Jamf.cnx.connect must be called before attemting to use the
-  # connection.
-  #
-  # @param (See Jamf::Connection#connect)
-  #
-  # @return [APIConnection] the new, active connection
-  #
-  def self.connect(url = nil, **params)
-    @active_connection = Connection.new url, params
-    @active_connection.to_s
-  end
-
-  # Switch the connection used for all API interactions to the
-  # one provided. See {Jamf::APIConnection} for details and examples
-  # of using multiple connections
-  #
-  # @param connection [APIConnection] The APIConnection to use for future
-  #   API calls. If omitted, use the default connection created when ruby-jss
-  #   was loaded (which may or may not yet be connected)
-  #
-  # @return [APIConnection] The connection now being used.
-  #
-  def self.cnx=(connection)
-    raise 'API connections must be instances of Jamf::Connection' unless connection.is_a? Jamf::Connection
-
-    @active_connection = connection
-  end
-
-  def self.disconnect
-    @active_connection.disconnect if @active_connection
-  end
-
-end # module Jamf
-
-require 'jamf/api/connection/token'
-require 'jamf/api/connection/api_error'
+end # module