rubber 1.3.2 → 1.5.0

data/lib/generators/vulcanize/templates/jetty/config/rubber/role/jetty/jetty.sh

@@ -0,0 +1,589 @@
+<%-
+  @path = "#{rubber_env.jetty_dir}/bin/jetty.sh"
+  @perms = 0744
+%>
+
+#!/bin/bash  
+#
+# Startup script for jetty under *nix systems (it works under NT/cygwin too).
+
+# To get the service to restart correctly on reboot, uncomment below (3 lines):
+# ========================
+# chkconfig: 3 99 99
+# description: Jetty 7 webserver
+# processname: jetty
+# ========================
+
+# Configuration files
+#
+# /etc/default/jetty
+#   If it exists, this is read at the start of script. It may perform any 
+#   sequence of shell commands, like setting relevant environment variables.
+#
+# $HOME/.jettyrc
+#   If it exists, this is read at the start of script. It may perform any 
+#   sequence of shell commands, like setting relevant environment variables.
+#
+# /etc/jetty.conf
+#   If found, and no configurations were given on the command line,
+#   the file will be used as this script's configuration. 
+#   Each line in the file may contain:
+#     - A comment denoted by the pound (#) sign as first non-blank character.
+#     - The path to a regular file, which will be passed to jetty as a 
+#       config.xml file.
+#     - The path to a directory. Each *.xml file in the directory will be
+#       passed to jetty as a config.xml file.
+#
+#   The files will be checked for existence before being passed to jetty.
+#
+# $JETTY_HOME/etc/jetty.xml
+#   If found, used as this script's configuration file, but only if
+#   /etc/jetty.conf was not present. See above.
+#   
+# Configuration variables
+#
+# JAVA_HOME  
+#   Home of Java installation. 
+#
+# JAVA
+#   Command to invoke Java. If not set, $JAVA_HOME/bin/java will be
+#   used.
+#
+# JAVA_OPTIONS
+#   Extra options to pass to the JVM
+
+JAVA_OPTIONS="<%= rubber_env.jetty_jvm_options %>"
+
+#
+# JETTY_HOME
+#   Where Jetty is installed. If not set, the script will try go
+#   guess it by first looking at the invocation path for the script,
+#   and then by looking in standard locations as $HOME/opt/jetty
+#   and /opt/jetty. The java system property "jetty.home" will be
+#   set to this value for use by configure.xml files, f.e.:
+#
+#    <Arg><SystemProperty name="jetty.home" default="."/>/webapps/jetty.war</Arg>
+#
+# JETTY_PORT
+#   Override the default port for Jetty servers. If not set then the
+#   default value in the xml configuration file will be used. The java
+#   system property "jetty.port" will be set to this value for use in
+#   configure.xml files. For example, the following idiom is widely
+#   used in the demo config files to respect this property in Listener
+#   configuration elements:
+#
+#    <Set name="Port"><SystemProperty name="jetty.port" default="8080"/></Set>
+#
+#   Note: that the config file could ignore this property simply by saying:
+#
+#    <Set name="Port">8080</Set>
+#
+# JETTY_RUN
+#   Where the jetty.pid file should be stored. It defaults to the
+#   first available of /var/run, /usr/var/run, and /tmp if not set.
+#  
+# JETTY_PID
+#   The Jetty PID file, defaults to $JETTY_RUN/jetty.pid
+#   
+# JETTY_ARGS
+#   The default arguments to pass to jetty.
+#
+# JETTY_USER
+#   if set, then used as a username to run the server as
+#
+# Set to 0 if you do not want to use start-stop-daemon (especially on SUSE boxes)
+START_STOP_DAEMON=1
+
+usage()
+{
+    echo "Usage: $0 {start|stop|run|restart|check|supervise} [ CONFIGS ... ] "
+    exit 1
+}
+
+[ $# -gt 0 ] || usage
+
+
+##################################################
+# Some utility functions
+##################################################
+findDirectory()
+{
+    OP=$1
+    shift
+    for L in $* ; do
+        [ $OP $L ] || continue 
+        echo $L
+        break
+    done 
+}
+
+running()
+{
+    [ -f $1 ] || return 1
+    PID=$(cat $1)
+    ps -p $PID >/dev/null 2>/dev/null || return 1
+    return 0
+}
+
+##################################################
+# Get the action & configs
+##################################################
+
+ACTION=$1
+shift
+ARGS="$*"
+NO_START=0
+
+##################################################
+# See if there's a default configuration file
+##################################################
+if [ -f /etc/default/jetty7 ] ; then 
+  . /etc/default/jetty7
+elif [ -f /etc/default/jetty ] ; then 
+  . /etc/default/jetty
+fi
+
+
+##################################################
+# See if there's a user-specific configuration file
+##################################################
+if [ -f $HOME/.jettyrc ] ; then 
+  . $HOME/.jettyrc
+fi
+
+##################################################
+# Set tmp if not already set.
+##################################################
+
+if [ -z "$TMP" ] 
+then
+  TMP=/tmp
+fi
+
+##################################################
+# Jetty's hallmark
+##################################################
+JETTY_INSTALL_TRACE_FILE="etc/jetty.xml"
+TMPJ=$TMP/j$$
+
+
+##################################################
+# Try to determine JETTY_HOME if not set
+##################################################
+if [ -z "$JETTY_HOME" ] 
+then
+  JETTY_HOME_1=`dirname "$0"`
+  JETTY_HOME_1=`dirname "$JETTY_HOME_1"`
+  if [ -f "${JETTY_HOME_1}/${JETTY_INSTALL_TRACE_FILE}" ] ; 
+  then 
+     JETTY_HOME=${JETTY_HOME_1} 
+  fi
+fi
+
+
+##################################################
+# if no JETTY_HOME, search likely locations.
+##################################################
+if [ "$JETTY_HOME" = "" ] ; then
+  STANDARD_LOCATIONS="           \
+        /usr/share               \
+        /usr/share/java          \
+        $HOME                    \
+        $HOME/src                \
+        ${HOME}/opt/             \
+        /opt                     \
+        /java                    \
+        /usr/local               \
+        /usr/local/share         \
+        /usr/local/share/java    \
+        /home                    \
+        "
+  JETTY_DIR_NAMES="              \
+        jetty-7                  \
+        jetty7                   \
+        jetty-7.*                \
+        jetty                    \
+        Jetty-7                  \
+        Jetty7                   \
+        Jetty-7.*                \
+        Jetty                    \
+        "
+        
+  JETTY_HOME=
+  for L in $STANDARD_LOCATIONS 
+  do
+     for N in $JETTY_DIR_NAMES 
+     do
+         if [ -d $L/$N ] && [ -f "$L/${N}/${JETTY_INSTALL_TRACE_FILE}" ] ; 
+         then 
+            JETTY_HOME="$L/$N"
+         fi
+     done
+     [ ! -z "$JETTY_HOME" ] && break
+  done
+fi
+
+
+##################################################
+# No JETTY_HOME yet? We're out of luck!
+##################################################
+if [ -z "$JETTY_HOME" ] ; then
+    echo "** ERROR: JETTY_HOME not set, you need to set it or install in a standard location" 
+    exit 1
+fi
+
+cd $JETTY_HOME
+JETTY_HOME=`pwd`
+
+#####################################################
+# Check that jetty is where we think it is
+#####################################################
+if [ ! -r $JETTY_HOME/$JETTY_INSTALL_TRACE_FILE ] 
+then
+   echo "** ERROR: Oops! Jetty doesn't appear to be installed in $JETTY_HOME"
+   echo "** ERROR:  $JETTY_HOME/$JETTY_INSTALL_TRACE_FILE is not readable!"
+   exit 1
+fi
+
+##################################################
+# Try to find this script's configuration file,
+# but only if no configurations were given on the
+# command line.
+##################################################
+if [ -z "$JETTY_CONF" ] 
+then
+  if [ -f /etc/jetty.conf ]
+  then
+     JETTY_CONF=/etc/jetty.conf
+  elif [ -f "${JETTY_HOME}/etc/jetty.conf" ]
+  then
+     JETTY_CONF="${JETTY_HOME}/etc/jetty.conf"
+  fi
+fi
+
+##################################################
+# Read the configuration file if one exists
+##################################################
+CONFIG_LINES=
+if [ -f "$JETTY_CONF" ] && [ -r "$JETTY_CONF" ] 
+then
+  CONFIG_LINES=`cat $JETTY_CONF | grep -v "^[:space:]*#" | tr "\n" " "` 
+fi
+
+#####################################################
+# Find a location for the pid file
+#####################################################
+if [  -z "$JETTY_RUN" ] 
+then
+  JETTY_RUN=`findDirectory -w /var/run /usr/var/run /tmp`
+fi
+
+#####################################################
+# Find a PID for the pid file
+#####################################################
+if [  -z "$JETTY_PID" ] 
+then
+  JETTY_PID="$JETTY_RUN/jetty.pid"
+fi
+
+
+##################################################
+# Check for JAVA_HOME
+##################################################
+if [ -z "$JAVA_HOME" ]
+then
+    # If a java runtime is not defined, search the following
+    # directories for a JVM and sort by version. Use the highest
+    # version number.
+
+    # Java search path
+    JAVA_LOCATIONS="\
+        /usr/java \
+        /usr/bin \
+        /usr/local/bin \
+        /usr/local/java \
+        /usr/local/jdk \
+        /usr/local/jre \
+        /usr/lib/jvm \
+        /opt/java \
+        /opt/jdk \
+        /opt/jre \
+    " 
+    JAVA_NAMES="java jdk jre"
+    for N in $JAVA_NAMES ; do
+        for L in $JAVA_LOCATIONS ; do
+            [ -d $L ] || continue 
+            find $L -name "$N" ! -type d | grep -v threads | while read J ; do
+                [ -x $J ] || continue
+                VERSION=`eval $J -version 2>&1`       
+                [ $? = 0 ] || continue
+                VERSION=`expr "$VERSION" : '.*"\(1.[0-9\.]*\)["_]'`
+                [ "$VERSION" = "" ] && continue
+                expr $VERSION \< 1.2 >/dev/null && continue
+                echo $VERSION:$J
+            done
+        done
+    done | sort | tail -1 > $TMPJ
+    JAVA=`cat $TMPJ | cut -d: -f2`
+    JVERSION=`cat $TMPJ | cut -d: -f1`
+
+    JAVA_HOME=`dirname $JAVA`
+    while [ ! -z "$JAVA_HOME" -a "$JAVA_HOME" != "/" -a ! -f "$JAVA_HOME/lib/tools.jar" ] ; do
+        JAVA_HOME=`dirname $JAVA_HOME`
+    done
+    [ "$JAVA_HOME" = "" ] && JAVA_HOME=
+
+    echo "Found JAVA=$JAVA in JAVA_HOME=$JAVA_HOME"
+fi
+
+
+##################################################
+# Determine which JVM of version >1.2
+# Try to use JAVA_HOME
+##################################################
+if [ "$JAVA" = "" -a "$JAVA_HOME" != "" ]
+then
+  if [ ! -z "$JAVACMD" ] 
+  then
+     JAVA="$JAVACMD" 
+  else
+    [ -x $JAVA_HOME/bin/jre -a ! -d $JAVA_HOME/bin/jre ] && JAVA=$JAVA_HOME/bin/jre
+    [ -x $JAVA_HOME/bin/java -a ! -d $JAVA_HOME/bin/java ] && JAVA=$JAVA_HOME/bin/java
+  fi
+fi
+
+if [ "$JAVA" = "" ]
+then
+    echo "Cannot find a JRE or JDK. Please set JAVA_HOME to a >=1.2 JRE" 2>&2
+    exit 1
+fi
+
+JAVA_VERSION=`expr "$($JAVA -version 2>&1 | head -1)" : '.*1\.\([0-9]\)'`
+
+#####################################################
+# See if JETTY_PORT is defined
+#####################################################
+if [ "$JETTY_PORT" != "" ] 
+then
+  JAVA_OPTIONS="$JAVA_OPTIONS -Djetty.port=$JETTY_PORT"
+fi
+
+#####################################################
+# See if JETTY_LOGS is defined
+#####################################################
+if [ "$JETTY_LOGS" != "" ]
+then
+  JAVA_OPTIONS="$JAVA_OPTIONS -Djetty.logs=$JETTY_LOGS"
+fi
+
+#####################################################
+# Are we running on Windows? Could be, with Cygwin/NT.
+#####################################################
+case "`uname`" in
+CYGWIN*) PATH_SEPARATOR=";";;
+*) PATH_SEPARATOR=":";;
+esac
+
+
+#####################################################
+# Add jetty properties to Java VM options.
+#####################################################
+JAVA_OPTIONS="$JAVA_OPTIONS -Djetty.home=$JETTY_HOME -Djava.io.tmpdir=$TMP"
+
+[ -f $JETTY_HOME/etc/start.config ] && JAVA_OPTIONS="-DSTART=$JETTY_HOME/etc/start.config $JAVA_OPTIONS"
+
+#####################################################
+# This is how the Jetty server will be started
+#####################################################
+
+JETTY_START=$JETTY_HOME/start.jar
+[ ! -f $JETTY_START ] && JETTY_START=$JETTY_HOME/lib/start.jar
+
+RUN_ARGS="$JAVA_OPTIONS -jar $JETTY_START --fromDaemon $JETTY_ARGS $ARGS"
+RUN_CMD="$JAVA $RUN_ARGS"
+
+#####################################################
+# Comment these out after you're happy with what 
+# the script is doing.
+#####################################################
+#echo "JETTY_HOME     =  $JETTY_HOME"
+#echo "JETTY_CONF     =  $JETTY_CONF"
+#echo "JETTY_RUN      =  $JETTY_RUN"
+#echo "JETTY_PID      =  $JETTY_PID"
+#echo "JETTY_ARGS     =  $JETTY_ARGS"
+#echo "ARGS           =  $ARGS"
+#echo "JAVA_OPTIONS   =  $JAVA_OPTIONS"
+#echo "JAVA           =  $JAVA"
+
+
+##################################################
+# Do the action
+##################################################
+case "$ACTION" in
+  start)
+        echo -n "Starting Jetty: "
+
+        if [ "$NO_START" = "1" ]; then 
+	  echo "Not starting jetty - NO_START=1 in /etc/default/jetty7";
+          exit 0;
+	fi
+
+
+	if [ "$START_STOP_DAEMON" = "1" ] && type start-stop-daemon > /dev/null 2>&1
+	then
+          [ x$JETTY_USER = x ] && JETTY_USER=$(whoami)
+	  [ $UID = 0 ] && CH_USER="-c $JETTY_USER"
+	  if start-stop-daemon -S -p$JETTY_PID $CH_USER -d $JETTY_HOME -b -m -a $JAVA -- $RUN_ARGS 
+	  then
+	      sleep 1
+	      if running $JETTY_PID
+	      then
+                  echo OK
+              else
+                  echo FAILED
+              fi
+	  fi
+
+	else
+
+          if [ -f $JETTY_PID ]
+          then
+            if running $JETTY_PID
+            then
+              echo "Already Running!!"
+              exit 1
+            else
+              # dead pid file - remove
+              rm -f $JETTY_PID
+            fi
+          fi
+
+          if [ x$JETTY_USER != x ] 
+          then
+              touch $JETTY_PID
+              chown $JETTY_USER $JETTY_PID
+              su - $JETTY_USER -c "
+                $RUN_CMD &
+                PID=\$!
+                disown \$PID
+                echo \$PID > $JETTY_PID"
+          else
+              $RUN_CMD &
+              PID=$!
+              disown $PID
+              echo $PID > $JETTY_PID
+          fi
+
+          echo "STARTED Jetty `date`" 
+        fi
+
+        ;;
+
+  stop)
+        echo -n "Stopping Jetty: "
+	if [ "$START_STOP_DAEMON" = "1" ] && type start-stop-daemon > /dev/null 2>&1; then
+	  start-stop-daemon -K -p $JETTY_PID -d $JETTY_HOME -a $JAVA -s HUP 
+	  sleep 1
+	  if running $JETTY_PID
+	  then
+	      sleep 3
+	      if running $JETTY_PID
+	      then
+		  sleep 30
+	          if running $JETTY_PID
+	          then
+	             start-stop-daemon -K -p $JETTY_PID -d $JETTY_HOME -a $JAVA -s KILL
+		  fi
+              fi
+	  fi
+
+	  rm -f $JETTY_PID
+          echo OK
+	else
+	  PID=`cat $JETTY_PID 2>/dev/null`
+          TIMEOUT=30
+          while running $JETTY_PID && [ $TIMEOUT -gt 0 ]
+          do
+            kill $PID 2>/dev/null
+            sleep 1
+            let TIMEOUT=$TIMEOUT-1
+          done
+          
+          [ $TIMEOUT -gt 0 ] || kill -9 $PID 2>/dev/null
+
+	  rm -f $JETTY_PID
+          echo OK
+	fi
+        ;;
+
+  restart)
+        JETTY_SH=$0
+        if [ ! -f $JETTY_SH ]; then
+          if [ ! -f $JETTY_HOME/bin/jetty.sh ]; then
+            echo "$JETTY_HOME/bin/jetty.sh does not exist."
+            exit 1
+          fi
+          JETTY_SH=$JETTY_HOME/bin/jetty.sh
+        fi
+        $JETTY_SH stop $*
+        sleep 5
+        $JETTY_SH start $*
+        ;;
+
+  supervise)
+       #
+       # Under control of daemontools supervise monitor which
+       # handles restarts and shutdowns via the svc program.
+       #
+         exec $RUN_CMD
+         ;;
+
+  run|demo)
+        echo "Running Jetty: "
+
+        if [ -f $JETTY_PID ]
+        then
+            if running $JETTY_PID
+            then
+              echo "Already Running!!"
+              exit 1
+            else
+              # dead pid file - remove
+              rm -f $JETTY_PID
+            fi
+        fi
+
+        exec $RUN_CMD
+        ;;
+
+  check)
+        echo "Checking arguments to Jetty: "
+        echo "JETTY_HOME     =  $JETTY_HOME"
+        echo "JETTY_CONF     =  $JETTY_CONF"
+        echo "JETTY_RUN      =  $JETTY_RUN"
+        echo "JETTY_PID      =  $JETTY_PID"
+        echo "JETTY_PORT     =  $JETTY_PORT"
+        echo "JETTY_LOGS     =  $JETTY_LOGS"
+        echo "JAVA_OPTIONS   =  $JAVA_OPTIONS"
+        echo "JAVA           =  $JAVA"
+        echo "CLASSPATH      =  $CLASSPATH"
+        echo "RUN_CMD        =  $RUN_CMD"
+        echo
+        
+        if [ -f $JETTY_RUN/jetty.pid ]
+        then
+            echo "Jetty running pid="`cat $JETTY_RUN/jetty.pid`
+            exit 0
+        fi
+        exit 1
+        ;;
+
+*)
+        usage
+	;;
+esac
+
+exit 0
+
+
+