rtiss_soap4r 1.6.0

data/test/soap/calc/test_calc2.rb

@@ -0,0 +1,57 @@
+# encoding: ASCII-8BIT
+require 'helper'
+require 'testutil'
+require 'soap/rpc/driver'
+TestUtil.require(File.dirname(__FILE__), 'server2.rb')
+
+
+module SOAP
+module Calc
+
+
+class TestCalc2 < Test::Unit::TestCase
+  Port = 17171
+
+  def setup
+    @server = CalcServer2.new('CalcServer', 'http://tempuri.org/calcService', '0.0.0.0', Port)
+    @server.level = Logger::Severity::ERROR
+    @t = Thread.new {
+      Thread.current.abort_on_exception = true
+      @server.start
+    }
+    @endpoint = "http://localhost:#{Port}/"
+    @var = SOAP::RPC::Driver.new(@endpoint, 'http://tempuri.org/calcService')
+    @var.wiredump_dev = STDERR if $DEBUG
+    @var.add_method('set_value', 'newValue')
+    @var.add_method('get_value')
+    @var.add_method_as('+', 'add', 'rhs')
+    @var.add_method_as('-', 'sub', 'rhs')
+    @var.add_method_as('*', 'multi', 'rhs')
+    @var.add_method_as('/', 'div', 'rhs')
+  end
+
+  def teardown
+    @server.shutdown if @server
+    if @t
+      @t.kill
+      @t.join
+    end
+    @var.reset_stream if @var
+  end
+
+  def test_calc2
+    assert_equal(1, @var.set_value(1))
+    assert_equal(3, @var + 2)
+    assert_equal(-1.2, @var - 2.2)
+    assert_equal(2.2, @var * 2.2)
+    assert_equal(0, @var / 2)
+    assert_equal(0.5, @var / 2.0)
+    assert_raises(ZeroDivisionError) do
+      @var / 0
+    end
+  end
+end
+
+
+end
+end

data/test/soap/calc/test_calc_cgi.rb

@@ -0,0 +1,72 @@
+# encoding: ASCII-8BIT
+require 'helper'
+require 'soap/rpc/driver'
+require 'logger'
+require 'webrick'
+require 'rbconfig'
+
+
+module SOAP
+module Calc
+
+
+class TestCalcCGI < Test::Unit::TestCase
+  # This test shuld be run after installing ruby.
+  RUBYBIN = File.join(
+    Config::CONFIG["bindir"],
+    Config::CONFIG["ruby_install_name"] + Config::CONFIG["EXEEXT"]
+  )
+  RUBYBIN << " -d" if $DEBUG
+
+  Port = 17171
+
+  def setup
+    logger = Logger.new(STDERR)
+    logger.level = Logger::Severity::ERROR
+    @server = WEBrick::HTTPServer.new(
+      :BindAddress => "0.0.0.0",
+      :Logger => logger,
+      :Port => Port,
+      :AccessLog => [],
+      :DocumentRoot => File.dirname(File.expand_path(__FILE__)),
+      :CGIPathEnv => ENV['PATH'],
+      :CGIInterpreter => RUBYBIN
+    )
+    @t = Thread.new {
+      Thread.current.abort_on_exception = true
+      @server.start
+    }
+    @endpoint = "http://localhost:#{Port}/server.cgi"
+    @calc = SOAP::RPC::Driver.new(@endpoint, 'http://tempuri.org/calcService')
+    @calc.wiredump_dev = STDERR if $DEBUG
+    @calc.add_method('add', 'lhs', 'rhs')
+    @calc.add_method('sub', 'lhs', 'rhs')
+    @calc.add_method('multi', 'lhs', 'rhs')
+    @calc.add_method('div', 'lhs', 'rhs')
+  end
+
+  def teardown
+    @server.shutdown if @server
+    if @t
+      @t.kill
+      @t.join
+    end
+    @calc.reset_stream if @calc
+  end
+
+  def test_calc_cgi
+    assert_equal(3, @calc.add(1, 2))
+    assert_equal(-1.1, @calc.sub(1.1, 2.2))
+    assert_equal(2.42, @calc.multi(1.1, 2.2))
+    assert_equal(2, @calc.div(5, 2))
+    assert_equal(2.5, @calc.div(5.0, 2))
+    assert_equal(1.0/0.0, @calc.div(1.1, 0))
+    assert_raises(ZeroDivisionError) do
+      @calc.div(1, 0)
+    end
+  end
+end
+
+
+end
+end

data/test/soap/case/test_mapping.rb

@@ -0,0 +1,58 @@
+# encoding: ASCII-8BIT
+require 'helper'
+require 'soap/marshal'
+
+
+module SOAP; module Case
+
+# {urn:TruckMateTypes}TTMHeader
+class TTMHeader
+  @@schema_type = "TTMHeader"
+  @@schema_ns = "urn:TruckMateTypes"
+  @@schema_element = [
+    ["dSN", ["SOAP::SOAPString", XSD::QName.new(nil, "DSN")]],
+    ["password", ["SOAP::SOAPString", XSD::QName.new(nil, "Password")]],
+    ["schema", ["SOAP::SOAPString", XSD::QName.new(nil, "Schema")]],
+    ["username", ["SOAP::SOAPString", XSD::QName.new(nil, "Username")]]
+  ]
+
+  attr_accessor :dSN
+  attr_accessor :password
+  attr_accessor :schema
+  attr_accessor :username
+
+  def initialize(dSN = nil, password = nil, schema = nil, username = nil)
+    @dSN = dSN
+    @password = password
+    @schema = schema
+    @username = username
+  end
+end
+
+
+class TestMapping < Test::Unit::TestCase
+  def test_mapping
+    dump = <<__XML__.chomp
+<?xml version="1.0" encoding="utf-8" ?>
+<env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
+    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
+    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <env:Body>
+    <SOAP..Case..TTMHeader xmlns:n1="urn:TruckMateTypes"
+        xsi:type="n1:TTMHeader"
+        env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
+      <DSN xsi:type="xsd:string">dsn</DSN>
+      <Password xsi:type="xsd:string">password</Password>
+      <Schema xsi:type="xsd:string">schema</Schema>
+      <Username xsi:type="xsd:string">username</Username>
+    </SOAP..Case..TTMHeader>
+  </env:Body>
+</env:Envelope>
+__XML__
+    o = TTMHeader.new("dsn", "password", "schema", "username")
+    assert_xml_equal(dump, SOAP::Marshal.dump(o))
+  end
+end
+
+
+end; end

data/test/soap/fault/test_customfault.rb

@@ -0,0 +1,61 @@
+# encoding: ASCII-8BIT
+require 'helper'
+require 'soap/rpc/driver'
+require 'soap/rpc/standaloneServer'
+
+
+module SOAP
+module Fault
+
+
+class TestCustomFault < Test::Unit::TestCase
+  Port = 17171
+
+  class CustomFaultServer < SOAP::RPC::StandaloneServer
+    def on_init
+      add_method(self, 'fault', 'msg')
+    end
+
+    def fault(msg)
+      SOAPFault.new(SOAPString.new("mycustom"),
+        SOAPString.new("error: #{msg}"),
+        SOAPString.new(self.class.name))
+    end
+  end
+
+  def setup
+    @server = CustomFaultServer.new('customfault', 'urn:customfault', '0.0.0.0', Port)
+    @server.level = Logger::Severity::ERROR
+    @t = Thread.new {
+      Thread.current.abort_on_exception = true
+      @server.start
+    }
+    @endpoint = "http://localhost:#{Port}/"
+    @client = SOAP::RPC::Driver.new(@endpoint, 'urn:customfault')
+    @client.wiredump_dev = STDERR if $DEBUG
+    @client.add_method("fault", "msg")
+  end
+
+  def teardown
+    @server.shutdown if @server
+    if @t
+      @t.kill
+      @t.join
+    end
+    @client.reset_stream if @client
+  end
+
+  def test_custom_fault
+    begin
+      @client.fault("message")
+      assert(false, 'exception not raised')
+    rescue SOAP::FaultError => e
+      assert(true, 'exception raised')
+      assert_equal('error: message', e.message)
+    end
+  end
+end
+
+
+end
+end

data/test/soap/fault/test_fault.rb

@@ -0,0 +1,47 @@
+# encoding: ASCII-8BIT
+require 'helper'
+require 'soap/rpc/driver'
+require 'soap/rpc/standaloneServer'
+
+
+module SOAP
+module Fault
+
+
+class TestFault < Test::Unit::TestCase
+
+  def setup
+    @client = SOAP::RPC::Driver.new(nil, 'urn:fault')
+    @client.wiredump_dev = STDERR if $DEBUG
+    @client.add_method("hello", "msg")
+  end
+
+  def teardown
+    @client.reset_stream if @client
+  end
+
+  def test_fault
+    @client.mapping_registry = SOAP::Mapping::EncodedRegistry.new
+    @client.test_loopback_response << <<__XML__
+<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
+  <soap:Body>
+    <soap:Fault>
+      <faultcode>soap:Server</faultcode>
+      <faultstring>DN cannot be empty</faultstring>
+      <detail />
+    </soap:Fault>
+  </soap:Body>
+</soap:Envelope>
+__XML__
+    begin
+      @client.hello("world")
+      assert(false)
+    rescue ::SOAP::FaultError => e
+      assert_equal("DN cannot be empty", e.message)
+    end
+  end
+end
+
+
+end
+end

data/test/soap/fault/test_soaparray.rb

@@ -0,0 +1,36 @@
+# encoding: ASCII-8BIT
+require 'helper'
+require 'soap/rpc/router'
+require 'soap/mapping/mapping'
+require 'soap/processor'
+
+
+module SOAP
+module Fault
+
+
+class TestSOAPArray < Test::Unit::TestCase
+
+  # simulate the soap fault creation and parsing on the client
+  def test_parse_fault
+    router = SOAP::RPC::Router.new('parse_SOAPArray_error')
+    soap_fault = pump_stack rescue router.create_fault_response($!)
+    env = SOAP::Processor.unmarshal(soap_fault.send_string)
+    soap_fault = SOAP::FaultError.new(env.body.fault)
+    # in literal service, RuntimeError is raised (not an ArgumentError)
+    # any chance to use Ruby's exception encoding in literal service?
+    assert_raises(RuntimeError) do
+      registry = SOAP::Mapping::LiteralRegistry.new
+      SOAP::Mapping.fault2exception(soap_fault, registry)
+    end
+  end
+
+  def pump_stack(max = 0)
+    raise ArgumentError if max > 10
+    pump_stack(max+1)
+  end
+end
+
+
+end
+end

data/test/soap/filter/test_filter.rb

@@ -0,0 +1,147 @@
+# encoding: ASCII-8BIT
+require 'helper'
+require 'soap/rpc/driver'
+require 'soap/rpc/standaloneServer'
+require 'soap/filter'
+
+
+module SOAP
+module Filter
+
+
+class TestFilter < Test::Unit::TestCase
+  Port = 17171
+  PortName = 'http://tempuri.org/filterPort'
+
+  class FilterTestServer < SOAP::RPC::StandaloneServer
+    class Servant
+      def self.create
+	new
+      end
+
+      def echo(amt)
+        amt
+      end
+    end
+
+    class ServerFilter1 < SOAP::Filter::Handler
+      # 15 -> 30
+      def on_outbound(envelope, opt)
+        unless envelope.body.is_fault
+          node = envelope.body.root_node
+          node.retval = SOAPInt.new(node.retval.data * 2)
+          node.elename = XSD::QName.new(nil, 'return')
+        end
+        envelope
+      end
+
+      # 4 -> 5
+      def on_inbound(xml, opt)
+        xml = xml.sub(/4/, '5')
+        xml
+      end
+    end
+
+    class ServerFilter2 < SOAP::Filter::Handler
+      # 5 -> 15
+      def on_outbound(envelope, opt)
+        unless envelope.body.is_fault
+          node = envelope.body.root_node
+          node.retval = SOAPInt.new(node.retval.data + 10)
+          node.elename = XSD::QName.new(nil, 'return')
+        end
+        envelope
+      end
+
+      # 5 -> 6
+      def on_inbound(xml, opt)
+        xml = xml.sub(/5/, '6')
+        xml
+      end
+    end
+
+    def initialize(*arg)
+      super
+      add_rpc_servant(Servant.new, PortName)
+      self.filterchain << ServerFilter1.new
+      self.filterchain << ServerFilter2.new
+    end
+  end
+
+  def setup
+    @endpoint = "http://localhost:#{Port}/"
+    setup_server
+    setup_client
+  end
+
+  def setup_server
+    @server = FilterTestServer.new(self.class.name, nil, '0.0.0.0', Port)
+    @server.level = Logger::Severity::ERROR
+    @t = Thread.new {
+      @server.start
+    }
+  end
+
+  def setup_client
+    @client = SOAP::RPC::Driver.new(@endpoint, PortName)
+    @client.wiredump_dev = STDERR if $DEBUG
+    @client.add_method('echo', 'amt')
+  end
+
+  def teardown
+    teardown_server if @server
+    teardown_client if @client
+  end
+
+  def teardown_server
+    @server.shutdown
+    @t.kill
+    @t.join
+  end
+
+  def teardown_client
+    @client.reset_stream
+  end
+
+  class ClientFilter1 < SOAP::Filter::Handler
+    # 1 -> 2
+    def on_outbound(envelope, opt)
+      param = envelope.body.root_node.inparam
+      param["amt"] = SOAPInt.new(param["amt"].data + 1)
+      param["amt"].elename = XSD::QName.new(nil, 'amt')
+      envelope
+    end
+
+    # 31 -> 32
+    def on_inbound(xml, opt)
+      xml = xml.sub(/31/, '32')
+      xml
+    end
+  end
+
+  class ClientFilter2 < SOAP::Filter::Handler
+    # 2 -> 4
+    def on_outbound(envelope, opt)
+      param = envelope.body.root_node.inparam
+      param["amt"] = SOAPInt.new(param["amt"].data * 2)
+      param["amt"].elename = XSD::QName.new(nil, 'amt')
+      envelope
+    end
+
+    # 30 -> 31
+    def on_inbound(xml, opt)
+      xml = xml.sub(/30/, '31')
+      xml
+    end
+  end
+
+  def test_call
+    @client.filterchain << ClientFilter1.new
+    @client.filterchain << ClientFilter2.new
+    assert_equal(32, @client.echo(1))
+  end
+end
+
+
+end
+end

data/test/soap/header/server.cgi

@@ -0,0 +1,121 @@
+# encoding: ASCII-8BIT
+$:.unshift File.expand_path(File.dirname(__FILE__)+'/../../../lib')
+require 'pstore'
+require 'soap/rpc/cgistub'
+require 'soap/header/simplehandler'
+
+
+class AuthHeaderPortServer < SOAP::RPC::CGIStub
+  PortName = 'http://tempuri.org/authHeaderPort'
+  SupportPortName = 'http://tempuri.org/authHeaderSupportPort'
+  MyHeaderName = XSD::QName.new("http://tempuri.org/authHeader", "auth")
+  SessionDB = File.join(File.expand_path(File.dirname(__FILE__)), 'session.pstoredb')
+
+  class AuthHeaderService
+    def self.create
+      new
+    end
+
+    def deposit(amt)
+      "deposit #{amt} OK"
+    end
+
+    def withdrawal(amt)
+      "withdrawal #{amt} OK"
+    end
+  end
+
+  class AuthHeaderSupportService
+    def delete_sessiondb
+      File.unlink(SessionDB) if File.file?(SessionDB)
+      backup = SessionDB + "~"
+      File.unlink(backup) if File.file?(backup)
+    end
+  end
+
+  def initialize(*arg)
+    super
+    add_rpc_servant(AuthHeaderService.new, PortName)
+    add_rpc_servant(AuthHeaderSupportService.new, SupportPortName)
+    add_rpc_headerhandler(ServerAuthHeaderHandler.new)
+  end
+
+  class ServerAuthHeaderHandler < SOAP::Header::SimpleHandler
+    Users = {
+      'NaHi' => 'passwd',
+      'HiNa' => 'wspass'
+    }
+
+    def initialize
+      super(MyHeaderName)
+      @db = PStore.new(SessionDB)
+      @db.transaction do
+	@db["root"] = {} unless @db.root?("root")
+      end
+      @userid = @sessionid = nil
+    end
+
+    def login(userid, passwd)
+      userid and passwd and Users[userid] == passwd
+    end
+
+    def auth(sessionid)
+      in_sessiondb do |root|
+	root[sessionid][0]
+      end
+    end
+
+    def create_session(userid)
+      in_sessiondb do |root|
+	while true
+  	  key = create_sessionkey
+  	  break unless root[key]
+   	end
+    	root[key] = [userid]
+     	key
+      end
+    end
+
+    def destroy_session(sessionkey)
+      in_sessiondb do |root|
+	root.delete(sessionkey)
+      end
+    end
+
+    def on_simple_outbound
+      { "sessionid" => @sessionid }
+    end
+
+    def on_simple_inbound(my_header, mu)
+      succeeded = false
+      userid = my_header["userid"]
+      passwd = my_header["passwd"]
+      if login(userid, passwd)
+	succeeded = true
+      elsif sessionid = my_header["sessionid"]
+	if userid = auth(sessionid)
+	  destroy_session(sessionid)
+	  succeeded = true
+	end
+      end
+      raise RuntimeError.new("authentication failed") unless succeeded
+      @userid = userid
+      @sessionid = create_session(userid)
+    end
+
+  private
+
+    def create_sessionkey
+      Time.now.usec.to_s
+    end
+
+    def in_sessiondb
+      @db.transaction do
+	yield(@db["root"])
+      end
+    end
+  end
+end
+
+
+status = AuthHeaderPortServer.new('AuthHeaderPortServer', nil).start