rspec 1.3.0 → 2.0.0

data/lib/spec/runner/differs/load-diff-lcs.rb

@@ -1,12 +0,0 @@
-begin
-  require 'diff/lcs'
-rescue LoadError
-  begin
-    require 'rubygems' unless ENV['NO_RUBYGEMS']
-    require 'diff/lcs'
-  rescue LoadError
-    raise "You must gem install diff-lcs to use diffing"
-  end
-end
-
-require 'diff/lcs/hunk'

data/lib/spec/runner/drb_command_line.rb

@@ -1,32 +0,0 @@
-require "drb/drb"
-
-module Spec
-  module Runner
-    # Facade to run specs by connecting to a DRB server
-    class DrbCommandLine
-
-      def self.port(options)
-        (options.drb_port || ENV["RSPEC_DRB"] || 8989).to_i
-      end
-
-      # Runs specs on a DRB server. Note that this API is similar to that of
-      # CommandLine - making it possible for clients to use both interchangeably.
-      def self.run(options)
-        begin
-          begin; \
-            DRb.start_service("druby://localhost:0"); \
-          rescue SocketError, Errno::EADDRNOTAVAIL; \
-            DRb.start_service("druby://:0"); \
-          end
-          spec_server = DRbObject.new_with_uri("druby://127.0.0.1:#{port(options)}")
-          spec_server.run(options.argv, options.error_stream, options.output_stream)
-          true
-        rescue DRb::DRbConnError
-          options.error_stream.puts "No server is running"
-          false
-        end
-      end
-
-    end
-  end
-end

data/lib/spec/runner/example_group_runner.rb

@@ -1,58 +0,0 @@
-module Spec
-  module Runner
-    class ExampleGroupRunner
-      def initialize(options)
-        @options = options
-      end
-
-      def load_files(files)
-        $KCODE = 'u' if RUBY_VERSION.to_f < 1.9
-        # It's important that loading files (or choosing not to) stays the
-        # responsibility of the ExampleGroupRunner. Some implementations (like)
-        # the one using DRb may choose *not* to load files, but instead tell
-        # someone else to do it over the wire.
-        files.each do |file|
-          load file
-        end
-      end
-
-      def run
-        prepare
-        success = true
-        example_groups.each do |example_group|
-          success = success & example_group.run(@options)
-        end
-        finish
-        success
-      end
-
-    protected
-
-      def prepare
-        reporter.start(number_of_examples)
-        example_groups.reverse! if reverse
-      end
-
-      def finish
-        reporter.end
-        reporter.dump
-      end
-
-      def reporter
-        @options.reporter
-      end
-
-      def reverse
-        @options.reverse
-      end
-
-      def example_groups
-        @options.example_groups
-      end
-
-      def number_of_examples
-        @options.number_of_examples
-      end
-    end
-  end
-end

data/lib/spec/runner/extensions/kernel.rb

@@ -1,9 +0,0 @@
-module Kernel
-  unless respond_to?(:debugger)
-    # Start a debugging session if ruby-debug is loaded with the -u/--debugger option
-    def debugger(steps=1)
-      # If not then just comment and proceed
-      $stderr.puts "debugger statement ignored, use -u or --debugger option on rspec to enable debugging"
-    end
-  end
-end

data/lib/spec/runner/formatter/base_formatter.rb

@@ -1,139 +0,0 @@
-module Spec
-  module Runner
-    module Formatter
-      # Formatter base-class, which implements all required methods as no-ops, with the exception
-      class BaseFormatter
-        # Formatters are initialized with <tt>options</tt> and <tt>output</tt>
-        # arguments. RSpec's built-in formatters already expect this, and any
-        # custom formatters should as well.
-        #
-        # ==== Parameters
-        # options::
-        #   A struct containing boolean values for colour, autospec,
-        #   and dry_run
-        # output::
-        #   Used by RSpec's built-in formatters to determine where to
-        #   write the output. Default is <tt>STDOUT</tt>, otherwise a
-        #   filename is expected.
-        #
-        # === Example
-        # If you invoke the <tt>spec</tt> command with:
-        #
-        #   --format progress:progress_report.txt
-        #
-        # ... the value of <tt>output</tt> will be progress_report.txt. If you
-        # don't identify an output destination, the default is STDOUT.
-        def initialize(options, output)
-        end
-        
-        # This method is invoked before any examples are run, right after
-        # they have all been collected. This can be useful for special
-        # formatters that need to provide progress on feedback (graphical ones)
-        #
-        # This method will only be invoked once, and the next one to be invoked
-        # is #example_group_started
-        #
-        # ==== Parameters
-        # example_count:: the total number of examples to be run
-        def start(example_count)
-        end
-
-        # This method is invoked at the beginning of the execution of each
-        # example_group. The next method to be invoked after this is
-        # #example_started
-        #
-        # ==== Parameters
-        # example_group_proxy:: instance of Spec::Example::ExampleGroupProxy
-        def example_group_started(example_group_proxy)
-        end
-        
-        # Deprecated - use example_group_started instead
-        def add_example_group(example_group_proxy)
-          Spec.deprecate("BaseFormatter#add_example_group", "BaseFormatter#example_group_started")
-          example_group_started(example_group_proxy)
-        end
-
-        # This method is invoked when an +example+ starts. The next method to be
-        # invoked after this is #example_passed, #example_failed, or
-        # #example_pending
-        #
-        # ==== Parameters
-        # example_proxy:: instance of Spec::Example::ExampleProxy
-        def example_started(example_proxy)
-        end
-
-        # This method is invoked when an +example+ passes.
-        # +example_proxy+ is the same instance of Spec::Example::ExampleProxy
-        # that was passed to example_started
-        #
-        # ==== Parameters
-        # example_proxy:: instance of Spec::Example::ExampleProxy
-        def example_passed(example_proxy)
-        end
-
-        # This method is invoked when an +example+ fails, i.e. an exception occurred
-        # inside it (such as a failed should or other exception).
-        #
-        # ==== Parameters
-        # example_proxy::
-        #   The same instance of Spec::Example::ExampleProxy that was passed
-        #   to <tt>example_started</tt>
-        #
-        # counter:: the sequential number of this failure
-        #
-        # failure:: instance of Spec::Runner::Reporter::Failure
-        def example_failed(example_proxy, counter, failure)
-        end
-        
-        # This method is invoked when an example is not yet implemented (i.e. has not
-        # been provided a block), or when an ExamplePendingError is raised.
-        # +message+ is the message from the ExamplePendingError, if it exists, or the
-        # default value of "Not Yet Implemented". +deprecated_pending_location+ is
-        # deprecated - use example_proxy.location instead
-        #
-        # ==== Parameters
-        # example_proxy:: instance of Spec::Example::ExampleProxy
-        # message::
-        #   the message passed to the pending message, or an internal
-        #   default
-        #
-        def example_pending(example_proxy, message, deprecated_pending_location=nil)
-        end
-
-        # This method is invoked after all of the examples have executed. The next method
-        # to be invoked after this one is #dump_failure (once for each failed example)
-        def start_dump
-        end
-
-        # Dumps detailed information about an example failure.
-        # This method is invoked for each failed example after all examples have run. +counter+ is the sequence number
-        # of the associated example. +failure+ is a Failure object, which contains detailed
-        # information about the failure.
-        #
-        # ==== Parameters
-        # counter:: the sequential number of this failure
-        # failure:: instance of Spec::Runner::Reporter::Failure
-        def dump_failure(counter, failure)
-        end
-      
-        # This method is invoked after the dumping of examples and failures.
-        #
-        # ==== Parameters
-        # duration:: the total time for the entire run
-        # example_count:: the number of examples run
-        # failure_count:: the number of examples that failed
-        # pending_count:: the number of examples that are pending
-        def dump_summary(duration, example_count, failure_count, pending_count)
-        end
-        
-        # This gets invoked after the summary
-        def dump_pending
-        end
-
-        # This method is invoked at the very end. Allows the formatter to clean up, like closing open streams.
-        def close
-        end
-      end
-    end
-  end
-end

data/lib/spec/runner/formatter/base_text_formatter.rb

@@ -1,142 +0,0 @@
-require 'spec/runner/formatter/base_formatter'
-require 'fileutils'
-
-module Spec
-  module Runner
-    module Formatter
-      # Baseclass for text-based formatters. Can in fact be used for
-      # non-text based ones too - just ignore the +output+ constructor
-      # argument.
-      class BaseTextFormatter < BaseFormatter
-        attr_reader :output, :example_group
-        # Creates a new instance that will write to +output+. If +output+ is a
-        # String, output will be written to the File with that name, otherwise
-        # +output+ is exected to be an IO (or an object that responds to #puts
-        # and #write).
-        def initialize(options, output)
-          @options = options
-          if String === output
-            FileUtils.mkdir_p(File.dirname(output))
-            @output = File.open(output, 'w')
-          else
-            @output = output
-          end
-          @pending_examples = []
-        end
-
-        def example_group_started(example_group_proxy)
-          @example_group = example_group_proxy
-        end
-        
-        def example_pending(example, message, deprecated_pending_location=nil)
-          @pending_examples << ["#{@example_group.description} #{example.description}", message, example.location]
-        end
-        
-        def dump_failure(counter, failure)
-          @output.puts
-          @output.puts "#{counter.to_s})"
-          @output.puts colorize_failure("#{failure.header}\n#{failure.exception.message}", failure)
-          @output.puts format_backtrace(failure.exception.backtrace)
-          @output.flush
-        end
-        
-        def colorize_failure(message, failure)
-          failure.pending_fixed? ? blue(message) : red(message)
-        end
-        
-        def colourise(message, failure)
-          Spec::deprecate("BaseTextFormatter#colourise", "colorize_failure")
-          colorize_failure(message, failure)
-        end
-        
-        def dump_summary(duration, example_count, failure_count, pending_count)
-          return if dry_run?
-          @output.puts
-          @output.puts "Finished in #{duration} seconds"
-          @output.puts
-
-          summary = "#{example_count} example#{'s' unless example_count == 1}, #{failure_count} failure#{'s' unless failure_count == 1}"
-          summary << ", #{pending_count} pending" if pending_count > 0  
-
-          if failure_count == 0
-            if pending_count > 0
-              @output.puts yellow(summary)
-            else
-              @output.puts green(summary)
-            end
-          else
-            @output.puts red(summary)
-          end
-          @output.flush
-        end
-
-        def dump_pending
-          unless @pending_examples.empty?
-            @output.puts
-            @output.puts "Pending:"
-            @pending_examples.each do |pending_example|
-              @output.puts "\n#{pending_example[0]} (#{pending_example[1]})"
-              @output.puts "#{pending_example[2]}\n"
-            end
-          end
-          @output.flush
-        end
-        
-        def close
-          @output.close  if (IO === @output) & (@output != $stdout)
-        end
-        
-        def format_backtrace(backtrace)
-          return "" if backtrace.nil?
-          backtrace.map { |line| backtrace_line(line) }.join("\n")
-        end
-      
-      protected
-
-        def colour?
-          !!@options.colour
-        end
-
-        def dry_run?
-          !!@options.dry_run
-        end
-        
-        def autospec?
-          !!@options.autospec || ENV.has_key?("AUTOTEST")
-        end
-        
-        def backtrace_line(line)
-          line.sub(/\A([^:]+:\d+)$/, '\\1:')
-        end
-
-        def colour(text, colour_code)
-          return text if output_to_file?
-          return text unless ENV['RSPEC_COLOR'] || (colour? & (autospec? || output_to_tty?)) 
-          "#{colour_code}#{text}\e[0m"
-        end
-
-        def output_to_file?
-          File === @output
-        end
-        
-        def output_to_tty?
-          begin
-            @output.tty?
-          rescue NoMethodError
-            false
-          end
-        end
-        
-        def green(text); colour(text, "\e[32m"); end
-        def red(text); colour(text, "\e[31m"); end
-        def yellow(text); colour(text, "\e[33m"); end
-        def blue(text); colour(text, "\e[34m"); end
-        
-        def magenta(text)
-          Spec::deprecate("BaseTextFormatter#magenta")
-          red(text)
-        end
-      end
-    end
-  end
-end

data/lib/spec/runner/formatter/failing_example_groups_formatter.rb

@@ -1,25 +0,0 @@
-require 'spec/runner/formatter/base_text_formatter'
-
-module Spec
-  module Runner
-    module Formatter
-      class FailingExampleGroupsFormatter < BaseTextFormatter
-        def example_failed(example, counter, failure)
-          if @example_group
-            @output.puts @example_group.description.gsub(/ \(druby.*\)/,"")
-
-            @output.flush
-            @example_group = nil
-          end
-        end
-        
-        def dump_failure(counter, failure)
-        end
-
-        def dump_summary(duration, example_count, failure_count, pending_count)
-        end
-        
-      end
-    end
-  end
-end

data/lib/spec/runner/formatter/failing_examples_formatter.rb

@@ -1,20 +0,0 @@
-require 'spec/runner/formatter/base_text_formatter'
-
-module Spec
-  module Runner
-    module Formatter
-      class FailingExamplesFormatter < BaseTextFormatter      
-        def example_failed(example, counter, failure)
-          @output.puts "#{example_group.description} #{example.description}"
-          @output.flush
-        end
-
-        def dump_failure(counter, failure)
-        end
-
-        def dump_summary(duration, example_count, failure_count, pending_count)
-        end
-      end
-    end
-  end
-end