rsmp_schema 0.4.4 → 0.5

data/schemas/tlc/1.0.14/statuses/S0205.json

@@ -1,7 +1,7 @@
 {
+  "description" : "Traffic Counting: Number of vehicles.\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
   "allOf" : [
     {
-      "description" : "Traffic Counting: Number of vehicles.\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -23,53 +23,59 @@
         }
       },
       "then" : {
-        "s" : null
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "start"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Time stamp for start of measuring. Format according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "start"
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "vehicles"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "description" : "Number of vehicles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)",
-            "type" : "string"
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Time stamp for start of measuring. Format according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "vehicles"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "description" : "Number of vehicles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)",
+                  "type" : "string"
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]

data/schemas/tlc/1.0.14/statuses/S0206.json

@@ -1,7 +1,7 @@
 {
+  "description" : "Traffic Counting: Vehicle speed\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
   "allOf" : [
     {
-      "description" : "Traffic Counting: Vehicle speed\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -23,53 +23,59 @@
         }
       },
       "then" : {
-        "s" : null
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "start"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "start"
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "speed"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "description" : "Average speed in km/h (integer).\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)",
-            "type" : "string"
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "speed"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "description" : "Average speed in km/h (integer).\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)",
+                  "type" : "string"
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]

data/schemas/tlc/1.0.14/statuses/S0207.json

@@ -1,7 +1,7 @@
 {
+  "description" : "Traffic Counting: Occupancy.\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
   "allOf" : [
     {
-      "description" : "Traffic Counting: Occupancy.\nThis status was introduced to improve performance in case traffic counting is done on all all detectors.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -23,53 +23,59 @@
         }
       },
       "then" : {
-        "s" : null
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "start"
-          }
+        "s" : {
+          "type" : "null"
         }
       },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "allOf" : [
-              {
-                "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
-              },
-              {
-                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
+      "else" : {
+        "allOf" : [
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "start"
+                }
               }
-            ]
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "required" : [
-          "n"
-        ],
-        "properties" : {
-          "n" : {
-            "const" : "occupancy"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "s" : {
-            "description" : "Occupancy in percent (%) (0-100)\n- Value expressed as an integer with a range of 0-100.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)",
-            "type" : "string"
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "allOf" : [
+                    {
+                      "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
+                    }
+                  ]
+                }
+              }
+            }
+          },
+          {
+            "if" : {
+              "required" : [
+                "n"
+              ],
+              "properties" : {
+                "n" : {
+                  "const" : "occupancy"
+                }
+              }
+            },
+            "then" : {
+              "properties" : {
+                "s" : {
+                  "description" : "Occupancy in percent (%) (0-100)\n- Value expressed as an integer with a range of 0-100.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)",
+                  "type" : "string"
+                }
+              }
+            }
           }
-        }
+        ]
       }
     }
   ]