rsmp_schema 0.3.2 → 0.4.1

data/schemas/tlc/1.1/statuses/S0025.json

@@ -36,7 +36,7 @@
                 "description" : "Time stamp for the minimum time for the signal group to go to green. If the signal group is green, it is the minimum time for the next green.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -62,7 +62,7 @@
                 "description" : "Time stamp for the maximum time for the signal group to go to green. If the signal group is green, it is the maximum time for the next green.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -88,7 +88,7 @@
                 "description" : "Time stamp for the most likely time for the signal group to go to green. If the signal group is green, it is the most likely time for the next green.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -114,7 +114,7 @@
                 "description" : "Confidence of the likelyToGEstimate. 0-100%"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -140,7 +140,7 @@
                 "description" : "Time stamp for the minimum time for the signal group to go to red. If the signal group is red, it is the minimum time for the next red.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -166,7 +166,7 @@
                 "description" : "Time stamp for the maximum time for the signal group to go to red. If the signal group is red, it is the maximum time for the next red.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -192,7 +192,7 @@
                 "description" : "Time stamp for the most likely time for the signal group to go to red. If the signal group is red, it is the most likely time for the next red.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -218,7 +218,7 @@
                 "description" : "Confidence of the likelyToREstimate. 0-100%"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0032.json

@@ -31,7 +31,7 @@
                 "description" : "Comma separated list of intersections which the status relates to, e.g. “1,2”.\nUse “0” for all intersections of the TLC."
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -54,11 +54,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "local: Local coordination\ncentralized: Coordination with synchronized clock\noff: Coordination not active",
                 "pattern" : "(?-mix:^(local|centralized|off)(?:,(local|centralized|off))*$)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/string_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/string_list"
               }
             ]
           }
@@ -85,7 +84,7 @@
                 "pattern" : "(?-mix:^(operator_panel|calendar_clock|control_block|forced|startup|other)(?:,(operator_panel|calendar_clock|control_block|forced|startup|other))*$)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/string_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/string_list"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0033.json

@@ -1,7 +1,7 @@
 {
   "allOf" : [
     {
-      "description" : "Signal Priority Status\nThis status can be used to get updates about priority requests. For example, you can use it to know when priority requests are activated or cancelled.\nA list of priorities is returned, referred to by their request ids. The same request id can appear only once.\nAll priorities are included in the list (not only the ones that have changed state since the last update). This is done regardless of whether the status is send in respond to a status request, or due to a status subscription, and also regardless of whether a status subscription uses an update interval, or send-on-change, or both.\nIf you subscribe using an update interval, you’re not guaranteed to get all intermediate states. To guarantee that, send-on-change must be used when subscribing.\nTo understand how this status relates to ETSI/J2735, please see the wiki.\nAll priorities are send on every status update, regardless of whether an interval, or sendOnChange (or both) is used.\nWhen a priority reaches an end states (completed, timeout, rejected, cooldown or stale), it must be sent once on the next status update, then removed from the list.\nA request always starts in the ‘received’ state. The following table shows the possible state transitions:",
+      "description" : "Signal Priority Status\nThis status can be used to get updates about priority requests. For example, you can use it to know when priority requests are activated or cancelled.\nA list of priorities is returned, referred to by their request ids. The same request id can appear only once.\nAll priorities are included in the list (not only the ones that have changed state since the last update). This is done regardless of whether the status is send in respond to a status request, or due to a status subscription, and also regardless of whether a status subscription uses an update interval, or send-on-change, or both.\nIf you subscribe using an update interval, you’re not guaranteed to get all intermediate states. To guarantee that, send-on-change must be used when subscribing.\nTo understand how this status relates to ETSI/J2735, please see the [wiki](https://github.com/rsmp-nordic/rsmp_sxl_traffic_lights/wiki/Signal-priority-and-ETSI-J2735).\nAll priorities are send on every status update, regardless of whether an interval, or sendOnChange (or both) is used.\nWhen a priority reaches an end states (completed, timeout, rejected, cooldown or stale), it must be sent once on the next status update, then removed from the list.\nA request always starts in the ‘received’ state. The following table shows the possible state transitions:\n\nState      | Possible next states\n---------- | -------------------------------------\nreceived   | queued, activated, rejected, cooldown\nqueued     | activated, timeout\nactivated  | completed, stale\ncompleted  |\ntimeout    |\nrejected   |\ncooldown   |\nstale      |",
       "properties" : {
         "n" : {
           "enum" : [
@@ -45,7 +45,7 @@
                       "description" : "Timestamp, indicating when the priority last changed state.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places.\nAll time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
                     },
                     {
-                      "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                      "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
                     }
                   ]
                 },
@@ -66,20 +66,20 @@
                 "e" : {
                   "allOf" : [
                     {
-                      "description" : "(Optional) Estimated green extension provided by the priority, in seconds\nOnly used when state is ‘completed’."
+                      "description" : "Estimated green extension provided by the priority, in seconds\nOnly used when state is ‘completed’."
                     },
                     {
-                      "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer"
                     }
                   ]
                 },
                 "d" : {
                   "allOf" : [
                     {
-                      "description" : "(Optional) Estimated red reduction provided by the priority, in seconds\nOnly used when state is ‘completed’."
+                      "description" : "Estimated red reduction provided by the priority, in seconds\nOnly used when state is ‘completed’."
                     },
                     {
-                      "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                      "$ref" : "../../../core/3.1.2/definitions.json#/integer"
                     }
                   ]
                 }

data/schemas/tlc/1.1/statuses/S0034.json

@@ -29,7 +29,7 @@
                 "description" : "Timeout, in minutes"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0091.json

@@ -33,7 +33,7 @@
                 ]
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0092.json

@@ -33,7 +33,7 @@
                 ]
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0096.json

@@ -1,7 +1,7 @@
 {
   "allOf" : [
     {
-      "description" : "Current date and time\nProvides diagnostic information about the current date and time set in the controller.",
+      "description" : "Current date and time.\nNote: UTC is used.\nProvides diagnostic information about the current date and time set in the controller.",
       "properties" : {
         "n" : {
           "enum" : [
@@ -31,10 +31,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Year according to format YYYY. NOTE: UTC is used"
+                "description" : "Year"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -57,10 +57,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Month (01-12) according to format MM. Note: UTC is used"
+                "description" : "Month"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -83,10 +83,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Day of month (01-31) according to format DD.  Note: UTC is used"
+                "description" : "Day of month"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -109,10 +109,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Hour of day (00-23) according to format DD. Note: UTC is used"
+                "description" : "Hour"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -135,10 +135,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Minute (00-59) according to format MM. Note: UTC is used"
+                "description" : "Minute"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -161,10 +161,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Second (00-59) according to format SS. Note: UTC is used"
+                "description" : "Second"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0097.json

@@ -25,7 +25,7 @@
       "then" : {
         "properties" : {
           "s" : {
-            "description" : "Checksum of the traffic parameters\nUses SHA-2 as hashing algorithm\nIncludes\n- all signal programs, including program versions\n- signal group settings\n- time plans\n- safety matrix\n- intergreen times\n- detector settings\n\nIt should NOT include:\n- network settings\n- log files\n- software\n- other device settings that are not part of the signal program\n\nNote:\n- The checksum should be calculated using the same data as used in S0098",
+            "description" : "Checksum of the traffic parameters\nUses SHA-2 as hashing algorithm\nIncludes\n- all signal programs, including program versions\n- signal group settings\n- time plans\n- safety matrix\n- intergreen times\n- detector settings\n\nIt should NOT include:\n- network settings\n- log files\n- software\n- other device settings that are not part of the signal program\n\nNote:\n- The checksum should be calculated using the same data as used in S0098\n- Data Downloaded with S0098 and hashed with SHA-2 should match this value.",
             "type" : "string"
           }
         }
@@ -50,7 +50,7 @@
                 "description" : "Time stamp of the checksum. Format according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0098.json

@@ -51,7 +51,7 @@
                 "description" : "Time stamp of the config. Format according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0201.json

@@ -30,7 +30,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -56,7 +56,7 @@
                 "description" : "Number of vehicles on a given detector logic (since last update)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0202.json

@@ -30,7 +30,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -56,7 +56,7 @@
                 "description" : "Average speed in km/h"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0203.json

@@ -30,7 +30,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -56,7 +56,7 @@
                 "description" : "Occupancy in percent (0-100%)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0204.json

@@ -38,7 +38,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -64,7 +64,7 @@
                 "description" : "Number of cars"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -90,7 +90,7 @@
                 "description" : "Number of cars with trailers"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -116,7 +116,7 @@
                 "description" : "Number of trucks"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -142,7 +142,7 @@
                 "description" : "Number of trucks with trailers"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -165,10 +165,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Number of busses"
+                "description" : "Number of buses"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -194,7 +194,7 @@
                 "description" : "Number of trams"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -220,7 +220,7 @@
                 "description" : "Number of motor cycles"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -246,7 +246,7 @@
                 "description" : "Number of bicycles"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }
@@ -272,7 +272,7 @@
                 "description" : "Number of pedestrians"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0205.json

@@ -30,7 +30,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C XML dateTime with a resolution of 3 decimal places. All time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -56,7 +56,7 @@
                 "description" : "Number of vehicles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0206.json

@@ -30,7 +30,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -56,7 +56,7 @@
                 "description" : "Average speed in km/h (integer).\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0207.json

@@ -30,7 +30,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -56,7 +56,7 @@
                 "description" : "Occupancy in percent (%) (0-100)\n- Value expressed as an integer with a range of 0-100.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0208.json

@@ -38,7 +38,7 @@
                 "description" : "Time stamp for start of measuring. Format according to W3C\nXML dateTime with a resolution of 3 decimal places. All time stamps\nin UTC. E.g. 2009-10-02T14:34:34.341Z"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                "$ref" : "../../../core/3.1.2/definitions.json#/timestamp"
               }
             ]
           }
@@ -64,7 +64,7 @@
                 "description" : "Number of cars.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -90,7 +90,7 @@
                 "description" : "Number of cars with trailers.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -116,7 +116,7 @@
                 "description" : "Number of trucks.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -142,7 +142,7 @@
                 "description" : "Number of trucks with trailers.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -165,10 +165,10 @@
           "s" : {
             "allOf" : [
               {
-                "description" : "Number of busses.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+                "description" : "Number of buses.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -194,7 +194,7 @@
                 "description" : "Number of trams.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -220,7 +220,7 @@
                 "description" : "Number of motor cycles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -246,7 +246,7 @@
                 "description" : "Number of bicycles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }
@@ -272,7 +272,7 @@
                 "description" : "Number of pedestrians.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.2/definitions.json#/integer_list"
               }
             ]
           }