rsmp_schema 0.1.1 → 0.2.2

data/schemas/tlc/1.0.7/sxl.yaml

@@ -177,15 +177,13 @@ objects:
           During maintenance work the controller might be using dark mode (no output to the signal heads).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Traffic Light Controller in dark mode
               True: Traffic Light Controller not in dark mode
@@ -196,15 +194,13 @@ objects:
           Signal timings is controlled manually by service personnel using the operating panel of the controller.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Manual control inactive
               True: Manual control active
@@ -215,15 +211,13 @@ objects:
           Usually only used in case normal detectors can't be used, e.g. during maintenance work.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Fixed time control inactive
               True: Fixed time control active
@@ -234,15 +228,13 @@ objects:
           Used to determine if the controller is operating independently or operating with other controllers (coordination).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Isolated control disabled
               True: Isolated control enabled (Vehicle actuated control or Fixed time control)
@@ -253,15 +245,13 @@ objects:
           Yellow flash may be used during a serious fault (depending on configuration) or maintenance work. It can also be manually set using M0001.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Yellow flash disabled
               True: Yellow flash enabled
@@ -272,15 +262,13 @@ objects:
           All red can be manually set using the controllers operating panel during maintenance work.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: All red disabled
               True: All red enabled
@@ -291,15 +279,13 @@ objects:
           The "police key" is a external control switch present in some controllers that manually switches the controller to either dark mode or yellow flash.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: integer
+            type: integer_list
             values:
               0: disabled
               1: dark mode
@@ -367,15 +353,13 @@ objects:
           Can be used for the management system to check the current control mode (startup, normal, standby, failure, test).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           controlmode:
-            list: true
-            type: string
+            type: string_list
             values:
               startup: Startup mode
               control: Normal control
@@ -469,29 +453,25 @@ objects:
           Requires security code 2.
         arguments:
           status:
-            list: true
+            type: string_list
             description: Set operating mode
-            type: string
             values:
               NormalControl: Normal Control
               YellowFlash: Enables yellow flash
               Dark: Enables dark mode
           securityCode:
-            list: true
+            type: string_list
             description: Security code 2
-            type: string
           timeout:
-            list: true
+            type: integer_list
             description: |-
               Time in minutes until controller automatically reverts to previous functional position.
               0=no automatic return
-            type: integer
             min: 0
             max: 1440
           intersection:
-            list: true
+            type: integer_list
             description: Intersection number
-            type: integer
             min: 0
             max: 255
         command: setValue

data/schemas/tlc/1.0.8/sxl.yaml

@@ -177,15 +177,13 @@ objects:
           During maintenance work the controller might be using dark mode (no output to the signal heads).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Traffic Light Controller in dark mode
               True: Traffic Light Controller not in dark mode
@@ -196,15 +194,13 @@ objects:
           Signal timings is controlled manually by service personnel using the operating panel of the controller.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Manual control inactive
               True: Manual control active
@@ -215,15 +211,13 @@ objects:
           Usually only used in case normal detectors can't be used, e.g. during maintenance work.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Fixed time control inactive
               True: Fixed time control active
@@ -234,15 +228,13 @@ objects:
           Used to determine if the controller is operating independently or operating with other controllers (coordination).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Isolated control disabled
               True: Isolated control enabled (Vehicle actuated control or Fixed time control)
@@ -253,15 +245,13 @@ objects:
           Yellow flash may be used during a serious fault (depending on configuration) or maintenance work. It can also be manually set using M0001.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Yellow flash disabled
               True: Yellow flash enabled
@@ -272,15 +262,13 @@ objects:
           All red can be manually set using the controllers operating panel during maintenance work.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: All red disabled
               True: All red enabled
@@ -291,15 +279,13 @@ objects:
           The "police key" is a external control switch present in some controllers that manually switches the controller to either dark mode or yellow flash.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: integer
+            type: integer_list
             values:
               0: disabled
               1: dark mode
@@ -367,15 +353,13 @@ objects:
           Can be used for the management system to check the current control mode (startup, normal, standby, failure, test).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           controlmode:
-            list: true
-            type: string
+            type: string_list
             values:
               startup: Startup mode
               control: Normal control
@@ -469,29 +453,25 @@ objects:
           Requires security code 2.
         arguments:
           status:
-            list: true
+            type: string_list
             description: Set operating mode
-            type: string
             values:
               NormalControl: Normal Control
               YellowFlash: Enables yellow flash
               Dark: Enables dark mode
           securityCode:
-            list: true
+            type: string_list
             description: Security code 2
-            type: string
           timeout:
-            list: true
+            type: integer_list
             description: |-
               Time in minutes until controller automatically reverts to previous functional position.
               0=no automatic return
-            type: integer
             min: 0
             max: 1440
           intersection:
-            list: true
+            type: integer_list
             description: Intersection number
-            type: integer
             min: 0
             max: 255
         command: setValue

data/schemas/tlc/1.0.9/sxl.yaml

@@ -177,15 +177,13 @@ objects:
           During maintenance work the controller might be using dark mode (no output to the signal heads).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Traffic Light Controller in dark mode
               True: Traffic Light Controller not in dark mode
@@ -196,15 +194,13 @@ objects:
           Signal timings is controlled manually by service personnel using the operating panel of the controller.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Manual control inactive
               True: Manual control active
@@ -215,15 +211,13 @@ objects:
           Usually only used in case normal detectors can't be used, e.g. during maintenance work.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Fixed time control inactive
               True: Fixed time control active
@@ -234,15 +228,13 @@ objects:
           Used to determine if the controller is operating independently or operating with other controllers (coordination).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Isolated control disabled
               True: Isolated control enabled (Vehicle actuated control or Fixed time control)
@@ -253,15 +245,13 @@ objects:
           Yellow flash may be used during a serious fault (depending on configuration) or maintenance work. It can also be manually set using M0001.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: Yellow flash disabled
               True: Yellow flash enabled
@@ -272,15 +262,13 @@ objects:
           All red can be manually set using the controllers operating panel during maintenance work.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: boolean
+            type: boolean_list
             description: |-
               False: All red disabled
               True: All red enabled
@@ -291,15 +279,13 @@ objects:
           The "police key" is a external control switch present in some controllers that manually switches the controller to either dark mode or yellow flash.
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           status:
-            list: true
-            type: integer
+            type: integer_list
             values:
               0: disabled
               1: dark mode
@@ -367,15 +353,13 @@ objects:
           Can be used for the management system to check the current control mode (startup, normal, standby, failure, test).
         arguments:
           intersection:
-            list: true
-            type: integer
+            type: integer_list
             description: |-
               0: Not applicable (only one intersection exists or applicable for all intersection of the traffic light controller)
               Other value: Intersection number
             range: "[0-255]"
           controlmode:
-            list: true
-            type: string
+            type: string_list
             values:
               startup: Startup mode
               control: Normal control
@@ -469,29 +453,25 @@ objects:
           Requires security code 2.
         arguments:
           status:
-            list: true
+            type: string_list
             description: Set operating mode
-            type: string
             values:
               NormalControl: Normal Control
               YellowFlash: Enables yellow flash
               Dark: Enables dark mode
           securityCode:
-            list: true
+            type: string_list
             description: Security code 2
-            type: string
           timeout:
-            list: true
+            type: integer_list
             description: |-
               Time in minutes until controller automatically reverts to previous functional position.
               0=no automatic return
-            type: integer
             min: 0
             max: 1440
           intersection:
-            list: true
+            type: integer_list
             description: Intersection number
-            type: integer
             min: 0
             max: 255
         command: setValue

data/schemas/tlc/1.1/commands/M0001.json

@@ -88,7 +88,7 @@
                 "description" : "Time in minutes until controller automatically reverts to previous functional position.\n0=no automatic return"
               },
               {
-                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
               }
             ]
           }

data/schemas/tlc/1.1/statuses/S0032.json

@@ -55,7 +55,7 @@
             "allOf" : [
               {
                 "description" : "local: Local coordination\ncentralized: Coordination with synchronized clock\noff: Coordination not active",
-                "pattern" : "(?-mix:^(local|centralized|false)(?:,(local|centralized|false))*$)"
+                "pattern" : "(?-mix:^(local|centralized|off)(?:,(local|centralized|off))*$)"
               },
               {
                 "$ref" : "../../../core/3.1.1/definitions.json#/string_list"

data/schemas/tlc/1.1/statuses/S0033.json

@@ -0,0 +1,93 @@
+{
+  "allOf" : [
+    {
+      "description" : "Signal Priority Status\nThis status can be used to get updates about priority requests. For example, you can use it to know when priority requests are activated or cancelled.\nA list of priorities is returned, referred to by their request ids. The same request id can appear only once.\nAll priorities are included in the list (not only the ones that have changed state since the last update). This is done regardless of whether the status is send in respond to a status request, or due to a status subscription, and also regardless of whether a status subscription uses an update interval, or send-on-change, or both.\nIf you subscribe using an update interval, you’re not guaranteed to get all intermediate states. To guarantee that, send-on-change must be used when subscribing.\nTo understand how this status relates to ETSI/J2735, please see the wiki.\nAll priorities are send on every status update, regardless of whether an interval, or sendOnChange (or both) is used.\nWhen a priority reaches an end states (completed, timeout, rejected, cooldown or stale), it must be sent once on the next status update, then removed from the list.\nA request always starts in the ‘received’ state. The following table shows the possible state transitions:",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "status"
+          ]
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "s" : {
+            "description" : "JSON array of priority status items",
+            "type" : "array",
+            "items" : {
+              "type" : "object",
+              "required" : [
+                "r",
+                "s",
+                "t"
+              ],
+              "additionalProperties" : false,
+              "properties" : {
+                "r" : {
+                  "description" : "ID of the priority request",
+                  "type" : "string"
+                },
+                "t" : {
+                  "allOf" : [
+                    {
+                      "description" : "Timestamp, indicating when the priority last changed state.\nFormat according to W3C XML dateTime with a resolution of 3 decimal places.\nAll time stamps in UTC. E.g. 2009-10-02T14:34:34.341Z"
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.1/definitions.json#/timestamp"
+                    }
+                  ]
+                },
+                "s" : {
+                  "description" : "Current status of the priority request",
+                  "type" : "string",
+                  "enum" : [
+                    "activated",
+                    "completed",
+                    "cooldown",
+                    "queued",
+                    "received",
+                    "rejected",
+                    "stale",
+                    "timeout"
+                  ]
+                },
+                "e" : {
+                  "allOf" : [
+                    {
+                      "description" : "(Optional) Estimated green extension provided by the priority, in seconds\nOnly used when state is ‘completed’."
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                    }
+                  ]
+                },
+                "d" : {
+                  "allOf" : [
+                    {
+                      "description" : "(Optional) Estimated red reduction provided by the priority, in seconds\nOnly used when state is ‘completed’."
+                    },
+                    {
+                      "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+                    }
+                  ]
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.1/statuses/S0205.json

@@ -51,8 +51,14 @@
       "then" : {
         "properties" : {
           "s" : {
-            "description" : "Number of vehicles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)",
-            "type" : "string"
+            "allOf" : [
+              {
+                "description" : "Number of vehicles.\n- Value expressed as an integer with a range of 0-65535.\n- Contains data from all detector logics. Each detector logic is separated with a comma.\n- The value is set to “-1” if no data could be measured (e.g. detector fault)"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/integer_list"
+              }
+            ]
           }
         }
       }