rsmp_schema 0.1.0

data/schemas/tlc/1.0.15/commands/M0006.json

@@ -0,0 +1,91 @@
+{
+  "allOf" : [
+    {
+      "description" : "Activate input.\nSet given input (1-255) of the controllers general purpose I/O to either true or false.\nThe function can provide an input to the traffic light controller on which a predefined action can be taken.\nCan be used for all types of input where the traffic light controller must react to external control.\nTypical usages are bus priority, coordination between traffic controllers, external control systems, and much more.\nRequires security code 2.",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "input",
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setInput"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "False: Deactivate input\nTrue: Activate input"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/boolean"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "input"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "Number of Input"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+              }
+            ]
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0007.json

@@ -0,0 +1,64 @@
+{
+  "allOf" : [
+    {
+      "description" : "Activate fixed time control.\nDeactivates the traffic actuated control using detectors and activates pre-timed control.\nCan be used in case normal detectors can't be used, e.g. during maintenance work.\nRequires security code 2.",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setFixedTime"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "False: Deactivate fixed time control\nTrue: Activate fixed time control"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/boolean"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0008.json

@@ -0,0 +1,91 @@
+{
+  "allOf" : [
+    {
+      "description" : "Sets manual activation of detector logic.\nSet given detector logic (1-255) to either true or false.\nCan e.g. be used to connect RSMP compatible detection equipment to the traffic light controller. Can also be used for prioritization.\nRequires security code 2",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "mode",
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setForceDetectorLogic"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "False: Deactivate manual control of detector logic\nTrue: Activate manual control of detector logic"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/boolean"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "mode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "False: Deactivate detector logic\nTrue: Activate detector logic"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/boolean"
+              }
+            ]
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0010.json

@@ -0,0 +1,64 @@
+{
+  "allOf" : [
+    {
+      "description" : "Start of signal group. Orders a signal group to green.\nAlthough this command is intended to be used with coordination it is not actually specified to be used for this yet. It is reserved in the SXL for possible future use.\nIntended for use with coordination of signaling systems where a traffic light controller communicates with neighboring controllers. Only used when a primary controller orders signal group of other controller to green or red (Coordination with external control bits).\nRequires security code 2",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setStart"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "False: No command (default)\nTrue: Order a signal group to green"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/boolean"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0011.json

@@ -0,0 +1,64 @@
+{
+  "allOf" : [
+    {
+      "description" : "Stop of signal group. Orders a signal group to red.\nAlthough this command is intended to be used with coordination it is not actually specified to be used for this yet. It is reserved in the SXL for possible future use.\nIntended for use with coordination of signaling systems where a traffic light controller communicates with neighboring controllers. Only used when a primary controller orders signal group of other controller to green or red (Coordination with external control bits).\nRequires security code 2",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setStop"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "False: No command (default)\nTrue: Order a signal group to red"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/boolean"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0012.json

@@ -0,0 +1,58 @@
+{
+  "allOf" : [
+    {
+      "description" : "Request start or stop of a series of signal groups.\nStarts or stops several signal groups.\nThis command was introduced due to coordination requirements needing to set many signal groups to green and red at the same time and M0010 and M0012 being to slow to send a message for each signal group individually.\nAlthough this command is intended to be used with coordination it is not actually specified to be used for this yet. It is reserved in the SXL for possible future use.\nIntended for use with coordination of signaling systems where a traffic light controller communicates with neighboring controllers.\nOnly used when a primary controller orders signal group of other controller to green or red (Coordination with external control bits).\nMay also include purposes for adaptive control where a UTC system or a local traffic light controller takes over the phase control (stage control).\nRequires security code 2.",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setStart"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Orders signal groups to green or red. Sets a block of 16 signal groups at a time. Can be repeated to set several blocks of 16 signal groups. Values are separated with comma. Blocks are separated with semicolon. Since semicolon breaks the SXL csv-format, colon is used in example below.\n\n1=Order signal group to green\n0=Order signal group to red\n\nFormat: [Offset],[Bits to set],[Bits to unset]:…\n\nOffset sets where the 16 inputs starts from followed by two 16 bit values telling which bit to set and unset in binary format, i.e. first bit have value 1 and last bit have value 32768.\n\nExample 1:\n\"5, 4134, 65\" sets input 6,7,10,17 = on and 5,11 = off\n(Input starts from no. 5 and bit 1,2,5,12 = 1 and bit 0,6 = 0)\n\nExample 2:\n\"22, 1, 4\" sets input 22 = on and 24 = off\n(Input starts from no. 22 and bit 0 = 1 and bit 2 = 0)\n\nAnd both these examples could be sent in the same message as:\n\"5,4143,65:22,1,4\"\n\nSuch a message would order signal group 6,7,10,17,22 to green and signal group 5,11,24 to red",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0013.json

@@ -0,0 +1,58 @@
+{
+  "allOf" : [
+    {
+      "description" : "Activate a series of inputs.\nSet given inputs (1-255) of the controllers general purpose I/O to either true or false.\nThis command was introduced due to coordination requirements needing to set many inputs to true/false at the same time and M0006 being to slow to send a message for each input individually. With this command many inputs can be set to true/false at the same time using a single RSMP message.\nCan be used for all types of input where the traffic light controller must react to external control. Typical usages are bus priority, coordination between traffic controllers, external control systems, and much more.\nRequires security code 2",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setInput"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Sets/Unsets a block of 16 inputs at a time. Can be repeated to set several blocks of 16 inputs. Values are separated with comma. Blocks are separated with semicolon. Since semicolon breaks the SXL csv-format, colon, \":\" is used in example below.\n\nFormat: [Offset],[Bits to set],[Bits to unset]:…\n\nOffset sets where the 16 inputs starts from followed by two 16 bit values telling which bit to set and unset in binary format, i.e. first bit have value 1 and last bit have value 32768.\n\nExample 1:\n\"5, 4134, 65\" sets input 6,7,10,17 = on and 5,11 = off\n(Input starts from no. 5 and bit 1,2,5,12 = 1 and bit 0,6 = 0)\n\nExample 2:\n\"22, 1, 4\" sets input 22 = on and 24 = off\n(Input starts from no. 22 and bit 0 = 1 and bit 2 = 0)\n\nAnd both thease examples could be sent in the same message as:\n\"5,4143:65:22,1,4\"\n\nSuch a message would activate input 6,7,10,17,22 and deactivate input 5,11,24",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0014.json

@@ -0,0 +1,85 @@
+{
+  "allOf" : [
+    {
+      "description" : "Set dynamic bands.\nCan be used to change between predefined signal timings. Moves the start of signal groups in the cycle.\nThis command can be used to change the split of green time during the cycle. A typical usage is scenario based control where changing of signal timings is used for optimal traffic flow.\nRequires security code 2",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "plan",
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setCommands"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "plan"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "Plan to be changed"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Dynamic bands.\nEach dynamic band are written as dd-ee where:\ndd=Dynamic band number (from 1-10)\nee=Extension in seconds in this band\n\nEach dynamic band is separated with a comma.\n\nE.g.\ndd-ee,dd-ee",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.15/commands/M0015.json

@@ -0,0 +1,91 @@
+{
+  "allOf" : [
+    {
+      "description" : "Set Offset time.\nOffset time is used to define an offset between intersections in coordinated control. It is based on the expected travel time between intersections.\nThis command can be used to fine tune the coordination for optimal traffic flow.\nRequires security code 2.",
+      "properties" : {
+        "n" : {
+          "enum" : [
+            "plan",
+            "securityCode",
+            "status"
+          ]
+        },
+        "cO" : {
+          "const" : "setOffset"
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "Set offset time in seconds"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "plan"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "allOf" : [
+              {
+                "description" : "Time plan nr"
+              },
+              {
+                "$ref" : "../../../core/3.1.1/definitions.json#/integer"
+              }
+            ]
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "required" : [
+          "n"
+        ],
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}