rsmp 0.47.0 → 0.48.0

data/schemas/tlc/1.3.0/commands/M0010.json

@@ -12,40 +12,46 @@
       "const" : "setStart"
     }
   },
-  "allOf" : [
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "status"
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/age_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
           }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "False: No command (default)\nTrue: Order a signal group to green",
-            "type" : "string"
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "securityCode"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "False: No command (default)\nTrue: Order a signal group to green",
+              "$ref" : "../defs/definitions.json#/boolean"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Security code 2",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "securityCode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Security code 2",
+              "type" : "string"
+            }
           }
         }
       }
-    }
-  ]
+    ]
+  }
 }

data/schemas/tlc/1.3.0/commands/M0011.json

@@ -12,40 +12,46 @@
       "const" : "setStop"
     }
   },
-  "allOf" : [
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "status"
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/age_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
           }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "False: No command (default)\nTrue: Order a signal group to red",
-            "type" : "string"
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "securityCode"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "False: No command (default)\nTrue: Order a signal group to red",
+              "$ref" : "../defs/definitions.json#/boolean"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Security code 2",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "securityCode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Security code 2",
+              "type" : "string"
+            }
           }
         }
       }
-    }
-  ]
+    ]
+  }
 }

data/schemas/tlc/1.3.0/commands/M0012.json

@@ -12,40 +12,46 @@
       "const" : "setStart"
     }
   },
-  "allOf" : [
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "status"
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/age_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
           }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Orders signal groups to green or red. Sets a block of 16 signal groups at a time. Can be repeated to set several blocks of 16 signal groups. Values are separated with comma. Blocks are separated with semicolon. Since semicolon breaks the SXL csv-format, colon is used in example below.\n\n1=Order signal group to green\n0=Order signal group to red\n\nFormat: [Offset],[Bits to set],[Bits to unset]:…\n\nOffset sets where the 16 inputs starts from followed by two 16 bit values telling which bit to set and unset in binary format, i.e. first bit have value 1 and last bit have value 32768.\n\nExample 1:\n\"5, 4134, 65\" sets input 6,7,10,17 = on and 5,11 = off\n(Input starts from no. 5 and bit 1,2,5,12 = 1 and bit 0,6 = 0)\n\nExample 2:\n\"22, 1, 4\" sets input 22 = on and 24 = off\n(Input starts from no. 22 and bit 0 = 1 and bit 2 = 0)\n\nAnd both these examples could be sent in the same message as:\n\"5,4143,65:22,1,4\"\n\nSuch a message would order signal group 6,7,10,17,22 to green and signal group 5,11,24 to red",
-            "$ref" : "../defs/definitions.json#/string_list"
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "securityCode"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Orders signal groups to green or red. Sets a block of 16 signal groups at a time. Can be repeated to set several blocks of 16 signal groups. Values are separated with comma. Blocks are separated with semicolon. Since semicolon breaks the SXL csv-format, colon is used in example below.\n\n1=Order signal group to green\n0=Order signal group to red\n\nFormat: [Offset],[Bits to set],[Bits to unset]:\u2026\n\nOffset sets where the 16 inputs starts from followed by two 16 bit values telling which bit to set and unset in binary format, i.e. first bit have value 1 and last bit have value 32768.\n\nExample 1:\n\"5, 4134, 65\" sets input 6,7,10,17 = on and 5,11 = off\n(Input starts from no. 5 and bit 1,2,5,12 = 1 and bit 0,6 = 0)\n\nExample 2:\n\"22, 1, 4\" sets input 22 = on and 24 = off\n(Input starts from no. 22 and bit 0 = 1 and bit 2 = 0)\n\nAnd both these examples could be sent in the same message as:\n\"5,4143,65:22,1,4\"\n\nSuch a message would order signal group 6,7,10,17,22 to green and signal group 5,11,24 to red",
+              "$ref" : "../defs/definitions.json#/string_list"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Security code 2",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "securityCode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Security code 2",
+              "type" : "string"
+            }
           }
         }
       }
-    }
-  ]
+    ]
+  }
 }

data/schemas/tlc/1.3.0/commands/M0013.json

@@ -1,6 +1,6 @@
 {
   "$schema" : "https://json-schema.org/draft/2020-12/schema",
-  "description" : "Activate a series of inputs\n\nSet given inputs (1-255) of the controllers general purpose I/O to either true or false. This command was introduced due to coordination requirements needing to set many inputs to true/false at the same time and M0006 being to slow to send a message for each input individually. With this command many inputs can be set to true/false at the same time using a single command message. It can be used for all types of input where the traffic light controller must react to external control. Typical usages are bus priority, coordination between traffic controllers, external control systems, and much more.\n\nRequires security code 2.\n\nThe parameter ‘status’ sets/unsets a block of 16 inputs at a time. It can be repeated to set several blocks of 16 inputs. Values are separated with comma. Blocks are separated with semicolon. Format: [Offset];[Bits to set];[Bits to unset];…\n\n- ‘Offset’ defines where the 16 inputs starts from\n- ‘Bits to set’ defines which bit(s) to set. ‘0’ if unused\n- ‘Bits to unset’ defines which bit(s) to unset. ‘0’ if unused\n\nExample 1:\n“3,4134,65” sets input 4,5,8,15 and unsets 3,9\n- Input starts from no. 5\n- “4134” is 1 0000 0010 0110 in binary, but since input starts from 3, it is shifted 3 bits, e.g. 1000 0001 0011 0000 which are bits 4,5,8,15\n- “65” is 100 0001 in binary, but since input starts from 3, it is shifted 3 bits, e.g. 10 0000 1000 which are bits 3,9\n\nExample 2:\n“12,1,4” sets input 12 and unsets 14\n- Input starts from no. 12\n- “1” is 1 in binary, but since input starts at 12 it is shifted 12 bits, e.g. 1 0000 0000 0000, which is bit 12\n- “4” is 100 in binary, but since input starts at 12 it is shifted 12 bits, e.g. 100 0000 0000 0000, which is bit 14\n\nAnd both these examples could be sent in the same message as: “3,4143,65;12,1,4”\n\nSuch a message would set input 4,5,8,12,15 and unset input 3,9,14\n\nExample 3:\n“0,1,2” sets input 0 and unsets 1\n- Input starts from 0\n- “1” is 1 in binary, which is bit 0\n- “2” is 10 in binary, which is bit 1",
+  "description" : "Activate a series of inputs\n\nSet given inputs (1-255) of the controllers general purpose I/O to either true or false. This command was introduced due to coordination requirements needing to set many inputs to true/false at the same time and M0006 being to slow to send a message for each input individually. With this command many inputs can be set to true/false at the same time using a single command message. It can be used for all types of input where the traffic light controller must react to external control. Typical usages are bus priority, coordination between traffic controllers, external control systems, and much more.\n\nRequires security code 2.\n\nThe parameter \u2018status\u2019 sets/unsets a block of 16 inputs at a time. It can be repeated to set several blocks of 16 inputs. Values are separated with comma. Blocks are separated with semicolon. Format: [Offset];[Bits to set];[Bits to unset];\u2026\n\n- \u2018Offset\u2019 defines where the 16 inputs starts from\n- \u2018Bits to set\u2019 defines which bit(s) to set. \u20180\u2019 if unused\n- \u2018Bits to unset\u2019 defines which bit(s) to unset. \u20180\u2019 if unused\n\nExample 1:\n\u201c3,4134,65\u201d sets input 4,5,8,15 and unsets 3,9\n- Input starts from no. 5\n- \u201c4134\u201d is 1 0000 0010 0110 in binary, but since input starts from 3, it is shifted 3 bits, e.g. 1000 0001 0011 0000 which are bits 4,5,8,15\n- \u201c65\u201d is 100 0001 in binary, but since input starts from 3, it is shifted 3 bits, e.g. 10 0000 1000 which are bits 3,9\n\nExample 2:\n\u201c12,1,4\u201d sets input 12 and unsets 14\n- Input starts from no. 12\n- \u201c1\u201d is 1 in binary, but since input starts at 12 it is shifted 12 bits, e.g. 1 0000 0000 0000, which is bit 12\n- \u201c4\u201d is 100 in binary, but since input starts at 12 it is shifted 12 bits, e.g. 100 0000 0000 0000, which is bit 14\n\nAnd both these examples could be sent in the same message as: \u201c3,4143,65;12,1,4\u201d\n\nSuch a message would set input 4,5,8,12,15 and unset input 3,9,14\n\nExample 3:\n\u201c0,1,2\u201d sets input 0 and unsets 1\n- Input starts from 0\n- \u201c1\u201d is 1 in binary, which is bit 0\n- \u201c2\u201d is 10 in binary, which is bit 1",
   "properties" : {
     "n" : {
       "enum" : [
@@ -12,40 +12,46 @@
       "const" : "setInput"
     }
   },
-  "allOf" : [
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "status"
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/age_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
           }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Sets/Unsets a block of 16 inputs at a time. Can be repeated to set several blocks of 16 inputs. Values are separated with comma. Blocks are separated with semicolon.\nFormat: [Offset];[Bits to set];[Bits to unset];…",
-            "$ref" : "../defs/definitions.json#/string_list"
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "securityCode"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Sets/Unsets a block of 16 inputs at a time. Can be repeated to set several blocks of 16 inputs. Values are separated with comma. Blocks are separated with semicolon.\nFormat: [Offset];[Bits to set];[Bits to unset];\u2026",
+              "$ref" : "../defs/definitions.json#/string_list"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Security code 2",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "securityCode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Security code 2",
+              "type" : "string"
+            }
           }
         }
       }
-    }
-  ]
+    ]
+  }
 }

data/schemas/tlc/1.3.0/commands/M0014.json

@@ -13,57 +13,63 @@
       "const" : "setCommands"
     }
   },
-  "allOf" : [
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "plan"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Plan to be changed",
-            "type" : "string"
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/age_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "plan"
+            }
           }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "status"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Plan to be changed",
+              "$ref" : "../defs/definitions.json#/integer"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Dynamic bands.\nEach dynamic band are written as dd-ee where:\ndd=Dynamic band number (from 1-10)\nee=Extension in seconds in this band\n\nEach dynamic band is separated with a comma.\n\nE.g.\ndd-ee,dd-ee",
-            "$ref" : "../defs/definitions.json#/string_list"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
           }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "securityCode"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Dynamic bands.\nEach dynamic band are written as dd-ee where:\ndd=Dynamic band number (from 1-10)\nee=Extension in seconds in this band\n\nEach dynamic band is separated with a comma.\n\nE.g.\ndd-ee,dd-ee",
+              "$ref" : "../defs/definitions.json#/string_list"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Security code 2",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "securityCode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Security code 2",
+              "type" : "string"
+            }
           }
         }
       }
-    }
-  ]
+    ]
+  }
 }

data/schemas/tlc/1.3.0/commands/M0015.json

@@ -13,57 +13,63 @@
       "const" : "setOffset"
     }
   },
-  "allOf" : [
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "status"
-          }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Set offset time in seconds",
-            "type" : "string"
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/age_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
           }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "plan"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Set offset time in seconds",
+              "$ref" : "../defs/definitions.json#/integer"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Time plan nr",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "plan"
+            }
           }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "securityCode"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Time plan nr",
+              "$ref" : "../defs/definitions.json#/integer"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Security code 2",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "securityCode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Security code 2",
+              "type" : "string"
+            }
           }
         }
       }
-    }
-  ]
+    ]
+  }
 }

data/schemas/tlc/1.3.0/commands/M0016.json

@@ -12,40 +12,46 @@
       "const" : "setWeekTable"
     }
   },
-  "allOf" : [
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "status"
+  "if" : {
+    "$ref" : "../defs/guards.json#/$defs/age_unknown_or_undefined"
+  },
+  "then" : {},
+  "else" : {
+    "allOf" : [
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "status"
+            }
           }
-        }
-      },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Week time table. Defines time table to use for each week day\nEach segment is written as d-t where:\nd=day of week\nt=time table nr\n\nDay of week legend:\n0=Monday\n1=Tuesday\n2=Wednesday\n3=Thursday\n4=Friday\n5=Saturday\n6=Sunday\n\nEach segment is separated with a comma\nE.g.\nd-t,d-t",
-            "$ref" : "../defs/definitions.json#/string_list"
-          }
-        }
-      }
-    },
-    {
-      "if" : {
-        "properties" : {
-          "n" : {
-            "const" : "securityCode"
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Week time table. Defines time table to use for each week day\nEach segment is written as d-t where:\nd=day of week\nt=time table nr\n\nDay of week legend:\n0=Monday\n1=Tuesday\n2=Wednesday\n3=Thursday\n4=Friday\n5=Saturday\n6=Sunday\n\nEach segment is separated with a comma\nE.g.\nd-t,d-t",
+              "$ref" : "../defs/definitions.json#/string_list"
+            }
           }
         }
       },
-      "then" : {
-        "properties" : {
-          "v" : {
-            "description" : "Security code 2",
-            "type" : "string"
+      {
+        "if" : {
+          "properties" : {
+            "n" : {
+              "const" : "securityCode"
+            }
+          }
+        },
+        "then" : {
+          "properties" : {
+            "v" : {
+              "description" : "Security code 2",
+              "type" : "string"
+            }
           }
         }
       }
-    }
-  ]
+    ]
+  }
 }