rsmp 0.42.8 → 0.43.0

data/schemas/tlc/1.0.9/commands/M0002.json

@@ -0,0 +1,69 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Sets current time plan.\nChange of traffic program of the traffic light controller.\nTypical usages is scenario based control where change of program is used to change signal timings etc.\nThis command changes the signal timings for optimal traffic flow.\nRequires security code 2",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status",
+        "timeplan"
+      ]
+    },
+    "cO" : {
+      "const" : "setPlan"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: Controller uses time plan according to programming\nTrue: Controller uses time plan according to command",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "timeplan"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "designation of time plan",
+            "$ref" : "../defs/definitions.json#/integer"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0003.json

@@ -0,0 +1,69 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Sets traffic situation the controller uses.\nUsed for area-based control where a command can be sent to a master traffic light controller about which predefined traffic situation to use (1-255).\nTraffic situation is a concept used to divide multiple TLC's into areas and sub-areas. The traffic situation gives the possibility to change the TLC sub-area dynamically depending on the time of day and the traffic flow. Depending on the traffic situation each TLC selects the time plan dynamically.\nRequires security code 2",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status",
+        "traficsituation"
+      ]
+    },
+    "cO" : {
+      "const" : "setTrafficSituation"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: Controller uses traffic situation according to own programming\nTrue: Controller uses traffic situation according to command",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "traficsituation"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "designation of traficsituation",
+            "$ref" : "../defs/definitions.json#/integer"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0004.json

@@ -0,0 +1,51 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Restarts Traffic Light Controller.\nUsed in the event of serious faults in the device where a restart is considered to be able to remedy a problem.\nRequires security code 2",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setRestart"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "True: Restart controller",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0005.json

@@ -0,0 +1,69 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Activate emergency route.\nThe function is made for emergency prioritization. Works in the same way as the M0006 and M0008 where the traffic light controller responds to an input.\nShould be used in situations where full priority is given in the emergency vehicle program.\nRequires security code 2.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "emergencyroute",
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setEmergency"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: Activate emergency route\nTrue: Deactivate emergency route",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "emergencyroute"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Number of emergency route",
+            "$ref" : "../defs/definitions.json#/integer"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0006.json

@@ -0,0 +1,69 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Activate input.\nSet given input (1-255) of the controllers general purpose I/O to either true or false.\nThe function can provide an input to the traffic light controller on which a predefined action can be taken.\nCan be used for all types of input where the traffic light controller must react to external control.\nTypical usages are bus priority, coordination between traffic controllers, external control systems, and much more.\nRequires security code 2.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "input",
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setInput"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: Deactivate input\nTrue: Activate input",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "input"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Number of Input",
+            "$ref" : "../defs/definitions.json#/integer"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0007.json

@@ -0,0 +1,51 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Activate fixed time control.\nDeactivates the traffic actuated control using detectors and activates pre-timed control.\nCan be used in case normal detectors can't be used, e.g. during maintenance work.\nRequires security code 2.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setFixedTime"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: Deactivate fixed time control\nTrue: Activate fixed time control",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0008.json

@@ -0,0 +1,69 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Sets manual activation of detector logic.\nSet given detector logic (1-255) to either true or false.\nCan e.g. be used to connect RSMP compatible detection equipment to the traffic light controller. Can also be used for prioritization.\nRequires security code 2",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "mode",
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setForceDetectorLogic"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: Deactivate manual control of detector logic\nTrue: Activate manual control of detector logic",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "mode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: Deactivate detector logic\nTrue: Activate detector logic",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0010.json

@@ -0,0 +1,51 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Start of signal group. Orders a signal group to green.\nAlthough this command is intended to be used with coordination it is not actually specified to be used for this yet. It is reserved in the SXL for possible future use.\nIntended for use with coordination of signaling systems where a traffic light controller communicates with neighboring controllers. Only used when a primary controller orders signal group of other controller to green or red (Coordination with external control bits).\nRequires security code 2",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setStart"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: No command (default)\nTrue: Order a signal group to green",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0011.json

@@ -0,0 +1,51 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Stop of signal group. Orders a signal group to red.\nAlthough this command is intended to be used with coordination it is not actually specified to be used for this yet. It is reserved in the SXL for possible future use.\nIntended for use with coordination of signaling systems where a traffic light controller communicates with neighboring controllers. Only used when a primary controller orders signal group of other controller to green or red (Coordination with external control bits).\nRequires security code 2",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setStop"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "False: No command (default)\nTrue: Order a signal group to red",
+            "$ref" : "../defs/definitions.json#/boolean"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0012.json

@@ -0,0 +1,51 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Request start or stop of a series of signal groups.\nStarts or stops several signal groups.\nThis command was introduced due to coordination requirements needing to set many signal groups to green and red at the same time and M0010 and M0012 being to slow to send a message for each signal group individually.\nAlthough this command is intended to be used with coordination it is not actually specified to be used for this yet. It is reserved in the SXL for possible future use.\nIntended for use with coordination of signaling systems where a traffic light controller communicates with neighboring controllers.\nOnly used when a primary controller orders signal group of other controller to green or red (Coordination with external control bits).\nMay also include purposes for adaptive control where a UTC system or a local traffic light controller takes over the phase control (stage control).\nRequires security code 2.",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setStart"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Orders signal groups to green or red. Sets a block of 16 signal groups at a time. Can be repeated to set several blocks of 16 signal groups. Values are separated with comma. Blocks are separated with semicolon. Since semicolon breaks the SXL csv-format, colon is used in example below.\n\n1=Order signal group to green\n0=Order signal group to red\n\nFormat: [Offset],[Bits to set],[Bits to unset]:...\n\nOffset sets where the 16 inputs starts from followed by two 16 bit values telling which bit to set and unset in binary format, i.e. first bit have value 1 and last bit have value 32768.\n\nExample 1:\n\"5, 4134, 65\" sets input 6,7,10,17 = on and 5,11 = off\n(Input starts from no. 5 and bit 1,2,5,12 = 1 and bit 0,6 = 0)\n\nExample 2:\n\"22, 1, 4\" sets input 22 = on and 24 = off\n(Input starts from no. 22 and bit 0 = 1 and bit 2 = 0)\n\nAnd both these examples could be sent in the same message as:\n\"5,4143,65:22,1,4\"\n\nSuch a message would order signal group 6,7,10,17,22 to green and signal group 5,11,24 to red",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}

data/schemas/tlc/1.0.9/commands/M0013.json

@@ -0,0 +1,51 @@
+{
+  "$schema" : "https://json-schema.org/draft/2020-12/schema",
+  "description" : "Activate a series of inputs.\nSet given inputs (1-255) of the controllers general purpose I/O to either true or false.\nThis command was introduced due to coordination requirements needing to set many inputs to true/false at the same time and M0006 being to slow to send a message for each input individually. With this command many inputs can be set to true/false at the same time using a single RSMP message.\nCan be used for all types of input where the traffic light controller must react to external control. Typical usages are bus priority, coordination between traffic controllers, external control systems, and much more.\nRequires security code 2",
+  "properties" : {
+    "n" : {
+      "enum" : [
+        "securityCode",
+        "status"
+      ]
+    },
+    "cO" : {
+      "const" : "setInput"
+    }
+  },
+  "allOf" : [
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "status"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Sets/Unsets a block of 16 inputs at a time. Can be repeated to set several blocks of 16 inputs. Values are separated with comma. Blocks are separated with semicolon. Since semicolon breaks the SXL csv-format, colon, \":\" is used in example below.\n\nFormat: [Offset],[Bits to set],[Bits to unset]:...\n\nOffset sets where the 16 inputs starts from followed by two 16 bit values telling which bit to set and unset in binary format, i.e. first bit have value 1 and last bit have value 32768.\n\nExample 1:\n\"5, 4134, 65\" sets input 6,7,10,17 = on and 5,11 = off\n(Input starts from no. 5 and bit 1,2,5,12 = 1 and bit 0,6 = 0)\n\nExample 2:\n\"22, 1, 4\" sets input 22 = on and 24 = off\n(Input starts from no. 22 and bit 0 = 1 and bit 2 = 0)\n\nAnd both thease examples could be sent in the same message as:\n\"5,4143:65:22,1,4\"\n\nSuch a message would activate input 6,7,10,17,22 and deactivate input 5,11,24",
+            "type" : "string"
+          }
+        }
+      }
+    },
+    {
+      "if" : {
+        "properties" : {
+          "n" : {
+            "const" : "securityCode"
+          }
+        }
+      },
+      "then" : {
+        "properties" : {
+          "v" : {
+            "description" : "Security code 2",
+            "type" : "string"
+          }
+        }
+      }
+    }
+  ]
+}