rroonga 6.1.0-x64-mingw32 → 6.1.3-x64-mingw32

data/vendor/local/share/doc/groonga/ja/html/_sources/install/centos.txt

@@ -19,8 +19,8 @@ CentOS 5
 
 Install::
 
-  % sudo rpm -ivh http://packages.groonga.org/centos/groonga-release-1.1.0-1.noarch.rpm
-  % sudo yum makecache
+  % wget http://packages.groonga.org/centos/groonga-release-1.2.0-1.noarch.rpm
+  % sudo yum install -y --nogpgcheck groonga-release-1.2.0-1.noarch.rpm
   % sudo yum install -y groonga
 
 .. include:: server-use.inc
@@ -36,29 +36,6 @@ There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
 Groonga status by Munin, install groonga-munin-plugins package.
 
-.. note::
-
-   Groonga-munin-plugins package requires munin-node package that
-   isn't included in the official CentOS repository. You need to
-   enable `Repoforge (RPMforge) <http://repoforge.org/>`_ repository
-   or `EPEL <http://fedoraproject.org/wiki/EPEL>`_ repository to
-   install it by ``yum``.
-
-   Enable Repoforge (RPMforge) repository on i386 environment::
-
-     % wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el5.rf.i386.rpm
-     % sudo rpm -ivh rpmforge-release-0.5.2-2.el5.rf.i386.rpm
-
-   Enable Repoforge (RPMforge) repository on x86_64 environment::
-
-     % wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el5.rf.x86_64.rpm
-     % sudo rpm -ivh rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
-
-   Enable EPEL repository on any environment::
-
-     % wget http://download.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm
-     % sudo rpm -ivh epel-release-5-4.noarch.rpm
-
 Install groonga-munin-plugins package::
 
   % sudo yum install -y groonga-munin-plugins
@@ -76,8 +53,7 @@ CentOS 6
 
 Install::
 
-  % sudo rpm -ivh http://packages.groonga.org/centos/groonga-release-1.1.0-1.noarch.rpm
-  % sudo yum makecache
+  % sudo yum install -y http://packages.groonga.org/centos/groonga-release-1.2.0-1.noarch.rpm
   % sudo yum install -y groonga
 
 .. include:: server-use.inc
@@ -93,17 +69,6 @@ There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
 Groonga status by Munin, install groonga-munin-plugins package.
 
-.. note::
-
-   Groonga-munin-plugins package requires munin-node package that
-   isn't included in the official CentOS repository. You need to
-   enable `EPEL <http://fedoraproject.org/wiki/EPEL>`_ repository to
-   install it by ``yum``.
-
-   Enable EPEL repository on any environment::
-
-     % sudo rpm -ivh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
-
 Install groonga-munin-plugins package::
 
   % sudo yum install -y groonga-munin-plugins
@@ -121,7 +86,7 @@ CentOS 7
 
 Install::
 
-  % sudo yum install -y http://packages.groonga.org/centos/groonga-release-1.1.0-1.noarch.rpm
+  % sudo yum install -y http://packages.groonga.org/centos/groonga-release-1.2.0-1.noarch.rpm
   % sudo yum install -y groonga
 
 .. include:: server-use.inc
@@ -137,17 +102,6 @@ There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
 Groonga status by Munin, install groonga-munin-plugins package.
 
-.. note::
-
-   Groonga-munin-plugins package requires munin-node package that
-   isn't included in the official CentOS repository. You need to
-   enable `EPEL <http://fedoraproject.org/wiki/EPEL>`_ repository to
-   install it by ``yum``.
-
-   Enable EPEL repository::
-
-     % sudo yum install -y epel-release
-
 Install groonga-munin-plugins package::
 
   % sudo yum install -y groonga-munin-plugins
@@ -169,9 +123,9 @@ Install required packages to build Groonga::
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-6.1.0.tar.gz
-  % tar xvzf groonga-6.1.0.tar.gz
-  % cd groonga-6.1.0
+  % wget http://packages.groonga.org/source/groonga/groonga-6.1.3.tar.gz
+  % tar xvzf groonga-6.1.3.tar.gz
+  % cd groonga-6.1.3
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/debian.txt

@@ -89,9 +89,9 @@ Install required packages to build Groonga::
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-6.1.0.tar.gz
-  % tar xvzf groonga-6.1.0.tar.gz
-  % cd groonga-6.1.0
+  % wget http://packages.groonga.org/source/groonga/groonga-6.1.3.tar.gz
+  % tar xvzf groonga-6.1.3.tar.gz
+  % cd groonga-6.1.3
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/fedora.txt

@@ -80,9 +80,9 @@ Install required packages to build Groonga::
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-6.1.0.tar.gz
-  % tar xvzf groonga-6.1.0.tar.gz
-  % cd groonga-6.1.0
+  % wget http://packages.groonga.org/source/groonga/groonga-6.1.3.tar.gz
+  % tar xvzf groonga-6.1.3.tar.gz
+  % cd groonga-6.1.3
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/mac_os_x.txt

@@ -49,9 +49,9 @@ Install `Xcode <https://developer.apple.com/xcode/>`_.
 
 Download source::
 
-  % curl -O http://packages.groonga.org/source/groonga/groonga-6.1.0.tar.gz
-  % tar xvzf groonga-6.1.0.tar.gz
-  % cd groonga-6.1.0
+  % curl -O http://packages.groonga.org/source/groonga/groonga-6.1.3.tar.gz
+  % tar xvzf groonga-6.1.3.tar.gz
+  % cd groonga-6.1.3
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/others.txt

@@ -62,7 +62,9 @@ All libraries are optional. Here are optional libraries:
   * `libedit <http://www.thrysoee.dk/editline/>`_ for command line
     editing in :doc:`/reference/executables/groonga`
   * `zlib <http://zlib.net/>`_ for compressing column value
-  * `LZ4 <https://code.google.com/p/lz4/>`_ for compressing
+  * `LZ4 <https://lz4.github.io/lz4/>`_ for compressing
+    column value
+  * `Zstandard <https://facebook.github.io/zstd/>`_ for compressing
     column value
 
 If you want to use those all or some libraries, you need to install
@@ -74,9 +76,9 @@ Build from source
 Groonga uses GNU build system. So the following is the simplest build
 steps::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-6.1.0.tar.gz
-  % tar xvzf groonga-6.1.0.tar.gz
-  % cd groonga-6.1.0
+  % wget http://packages.groonga.org/source/groonga/groonga-6.1.3.tar.gz
+  % tar xvzf groonga-6.1.3.tar.gz
+  % cd groonga-6.1.3
   % ./configure
   % make
   % sudo make install

data/vendor/local/share/doc/groonga/ja/html/_sources/install/solaris.txt

@@ -17,9 +17,9 @@ Install required packages to build Groonga::
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-6.1.0.tar.gz
-  % gtar xvzf groonga-6.1.0.tar.gz
-  % cd groonga-6.1.0
+  % wget http://packages.groonga.org/source/groonga/groonga-6.1.3.tar.gz
+  % gtar xvzf groonga-6.1.3.tar.gz
+  % cd groonga-6.1.3
 
 Configure with ``CFLAGS="-m64" CXXFLAGS="-m64"`` variables. They are
 needed for building 64-bit version. To build 32-bit version, just

data/vendor/local/share/doc/groonga/ja/html/_sources/install/ubuntu.txt

@@ -24,7 +24,8 @@ Here are supported Ubuntu versions:
 
   * 12.04 LTS Precise Pangolin
   * 14.04 LTS Trusty Tahr
-  * 16.04 Xenial Xerus
+  * 16.04 LTS Xenial Xerus
+  * 16.10 Yakkety Yak
 
 
 Enable the universe repository to install Groonga::
@@ -82,9 +83,9 @@ Install required packages to build Groonga::
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-6.1.0.tar.gz
-  % tar xvzf groonga-6.1.0.tar.gz
-  % cd groonga-6.1.0
+  % wget http://packages.groonga.org/source/groonga/groonga-6.1.3.tar.gz
+  % tar xvzf groonga-6.1.3.tar.gz
+  % cd groonga-6.1.3
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/windows.txt

@@ -21,14 +21,14 @@ Installer
 For 32-bit environment, download x86 executable binary from
 packages.groonga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-6.1.0-x86.exe
+  * http://packages.groonga.org/windows/groonga/groonga-6.1.3-x86.exe
 
 Then run it.
 
 For 64-bit environment, download x64 executable binary from
 packages.goronga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-6.1.0-x64.exe
+  * http://packages.groonga.org/windows/groonga/groonga-6.1.3-x64.exe
 
 Then run it.
 
@@ -41,14 +41,14 @@ zip
 For 32-bit environment, download x86 zip archive from
 packages.groonga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-6.1.0-x86.zip
+  * http://packages.groonga.org/windows/groonga/groonga-6.1.3-x86.zip
 
 Then extract it.
 
 For 64-bit environment, download x64 zip archive from
 packages.groonga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-6.1.0-x64.zip
+  * http://packages.groonga.org/windows/groonga/groonga-6.1.3-x64.zip
 
 Then extract it.
 
@@ -66,27 +66,27 @@ Windows. Here are required tools:
 
 Download zipped source from packages.groonga.org:
 
-  * http://packages.groonga.org/source/groonga/groonga-6.1.0.zip
+  * http://packages.groonga.org/source/groonga/groonga-6.1.3.zip
 
 Then extract it.
 
 Move to the Groonga's source folder::
 
-  > cd c:\Users\%USERNAME%\Downloads\groonga-6.1.0
+  > cd c:\Users\%USERNAME%\Downloads\groonga-6.1.3
 
 Configure by ``cmake``. The following commnad line is for 64-bit
 version. To build 32-bit version, use ``-G "Visual Studio 12 2013"``
 parameter instead::
 
-  groonga-6.1.0> cmake . -G "Visual Studio 12 2013 Win64" -DCMAKE_INSTALL_PREFIX=C:\Groonga
+  groonga-6.1.3> cmake . -G "Visual Studio 12 2013 Win64" -DCMAKE_INSTALL_PREFIX=C:\Groonga
 
 Build::
 
-  groonga-6.1.0> cmake --build . --config Release
+  groonga-6.1.3> cmake --build . --config Release
 
 Install::
 
-  groonga-6.1.0> cmake --build . --config Release --target Install
+  groonga-6.1.3> cmake --build . --config Release --target Install
 
 After the above steps, :doc:`/reference/executables/groonga` is found at
 ``c:\Groonga\bin\groonga.exe``.

data/vendor/local/share/doc/groonga/ja/html/_sources/news.txt

@@ -7,6 +7,137 @@
 News
 ====
 
+.. _release-6-1-3:
+
+Release 6.1.3 - 2017-01-06
+--------------------------
+
+Improvements
+^^^^^^^^^^^^
+
+* [:c:func:`grn_db_recover()`][:doc:`/reference/executables/grndb`] Reduced memory usage when only 1 thread mode.
+
+Fixes
+^^^^^
+
+* Reverted "Improved performance of updating inverted indexes in the worst case".
+  It had reported error when key has multibyte character.
+  This change was included in 6.1.2.
+
+* [:ref:`token-regexp`] Fixed a bug that `\\A${ONE_CHARACTER}\\z`
+  returns all one character values.
+
+.. _release-6-1-2:
+
+Release 6.1.2 - 2016-12-31
+--------------------------
+
+Improvements
+^^^^^^^^^^^^
+
+* windows: Supported to bundle groonga-normalizer-mysql.
+
+* [:doc:`/reference/log`] Added description about log format with
+  ``PID`` case.
+
+* [:doc:`/install/centos`] Improved installation procedure about
+  recent ``groonga-release`` package.
+
+* [:doc:`/reference/commands/load`] Supported to show
+  ``{"n_loaded_records": N}`` in response for command version 3 or
+  later.
+
+* [:doc:`/reference/commands/load`] Supported ``--output_ids yes``
+  parameter for command version 3 or later.  If ``--output_ids yes`` is
+  specified, loaded record IDs(``loaded_ids``) are also returned. ID
+  is 0 for record that is failed to add.
+
+* [:doc:`/install/others`] Added installation instruction about
+  depended packages (Zstandard, LZ4)
+
+* Changed to use Onigmo 6.0 as regular expression library.
+
+* Marked some features as stable.
+
+  * :doc:`/reference/executables/grndb` command.
+  * :doc:`/reference/commands/request_cancel` command.
+  * :doc:`/reference/functions/highlight_html` function.
+  * :doc:`/reference/functions/highlight_full` function.
+  * :doc:`/reference/functions/snippet_html` function.
+
+* [httpd] Updated bundled nginx to 1.11.8.
+
+* Improved to reduce ``AND`` search response time.
+  [GitHub#618,#619,#620] [Patch by Naoya Murakami]
+
+* Improved performance of updating inverted indexes in the worst case.
+  This fix also reduces memory usage in that
+  process. [groonga-dev,04219] [Reported by Masanori Miyashita]
+
+Fixes
+^^^^^
+
+* Added missing ``NULL`` check about return value of
+  ``grn_ctx_at``. This fix prevents from unexpected crash bug.
+
+Thanks
+^^^^^^
+
+* Naoya Murakami
+* Masanori Miyashita
+
+.. _release-6-1-1:
+
+Release 6.1.1 - 2016-11-29
+--------------------------
+
+Improvements
+^^^^^^^^^^^^
+
+* [:doc:`/reference/commands/select`] Supported the following functions in slices.
+
+  * :doc:`/reference/functions/between`
+  * :doc:`/reference/functions/geo_in_circle`
+  * :doc:`/reference/functions/geo_in_rectangle`
+  * :doc:`/reference/functions/in_values`
+  * :doc:`/reference/functions/fuzzy_search`
+  * :doc:`/reference/functions/query`
+
+* [:doc:`/reference/executables/groonga-httpd`] Supported PID output to
+  log file. It is useful to distinct multiple worker processes.
+  The messages are logged as ``TIMESTAMP|MARK|PID: MESSAGE``.
+
+* [ja] Changed to stop compressing small data. If column data is less
+  than 256 byte, the data aren't compressed even when ``COMPRESS_ZLIB``
+  or ``COMPRESS_LZ4`` or ``COMPRESS_ZSTD`` is specified. By this change,
+  performance and space efficiency will be improved.
+
+* [:doc:`/reference/commands/column_create`] Supported Zstandard.
+  ``COMPRESS_ZSTD`` flag is used to enable this feature.
+
+* [rpm][centos] Enabled Zstandard for CentOS 6 or later packages.
+
+* [:doc:`/reference/functions/between`] Supported ``between(_key, ...)``
+  as target.
+
+* [httpd] Updated bundled nginx to 1.11.6..
+
+Fixes
+^^^^^
+
+* Fixed a bug that needless index check reports error wrongly when the
+  default column value such as 0 exists in lexicon. It shows error
+  message such as "[ii][delete][one] failed to allocate a segment:
+  ..." unexpectedly.
+
+* [:doc:`/reference/commands/logical_table_remove`] Fixed a bug that
+  it may return error with ``--dependent yes`` option. In the previous
+  version, if one or more columns that refer the same table, the error
+  is occurred.
+
+* [sort] Fixed a crash bug when one of sort keys is a compressed
+  column and ``--query`` and/or ``--filter`` are used at the same time.
+
 .. _release-6-1-0:
 
 Release 6.1.0 - 2016-10-29
@@ -48,8 +179,9 @@ Fixes
 * Fixed a bug that table of index column was reported in log instead of
   correct index column.
 
-* Fixed a bug that unexpected "invalid cursor error" is recorded in
-  log file. [Gitter:groonga/ja:57f2ff87d45d7f0f525e2216] [Reported by
+* Fixed a bug that in posting list skip optimization in index search
+  may skip to wrong
+  position. [Gitter:groonga/ja:57f2ff87d45d7f0f525e2216] [Reported by
   torinky]
 
 * Fixed a memory leak on static index construction.

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/request_cancel.txt

@@ -8,10 +8,6 @@
 Summary
 -------
 
-.. note::
-
-   This command is an experimental feature.
-
 .. versionadded:: 4.0.9
 
 ``request_cancel`` command cancels a running request.

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/select.txt

@@ -42,7 +42,7 @@ optional::
          [cache=yes]
          [match_escalation_threshold=0]
          [query_expansion=null]
-         [query_flags=ALLOW_PRAGMA|ALLOW_COLUMN|ALLOW_UPDATE|ALLOW_LEADING_NOT|NONE]
+         [query_flags=ALLOW_PRAGMA|ALLOW_COLUMN]
          [query_expander=null]
          [adjuster=null]
          [drilldown_calc_types=NONE]