rroonga 6.0.7-x64-mingw32 → 6.0.9-x64-mingw32

data/vendor/local/share/man/man3/pcreperform.3

@@ -0,0 +1,177 @@
+.TH PCREPERFORM 3 "09 January 2012" "PCRE 8.30"
+.SH NAME
+PCRE - Perl-compatible regular expressions
+.SH "PCRE PERFORMANCE"
+.rs
+.sp
+Two aspects of performance are discussed below: memory usage and processing
+time. The way you express your pattern as a regular expression can affect both
+of them.
+.
+.SH "COMPILED PATTERN MEMORY USAGE"
+.rs
+.sp
+Patterns are compiled by PCRE into a reasonably efficient interpretive code, so
+that most simple patterns do not use much memory. However, there is one case
+where the memory usage of a compiled pattern can be unexpectedly large. If a
+parenthesized subpattern has a quantifier with a minimum greater than 1 and/or
+a limited maximum, the whole subpattern is repeated in the compiled code. For
+example, the pattern
+.sp
+  (abc|def){2,4}
+.sp
+is compiled as if it were
+.sp
+  (abc|def)(abc|def)((abc|def)(abc|def)?)?
+.sp
+(Technical aside: It is done this way so that backtrack points within each of
+the repetitions can be independently maintained.)
+.P
+For regular expressions whose quantifiers use only small numbers, this is not
+usually a problem. However, if the numbers are large, and particularly if such
+repetitions are nested, the memory usage can become an embarrassment. For
+example, the very simple pattern
+.sp
+  ((ab){1,1000}c){1,3}
+.sp
+uses 51K bytes when compiled using the 8-bit library. When PCRE is compiled
+with its default internal pointer size of two bytes, the size limit on a
+compiled pattern is 64K data units, and this is reached with the above pattern
+if the outer repetition is increased from 3 to 4. PCRE can be compiled to use
+larger internal pointers and thus handle larger compiled patterns, but it is
+better to try to rewrite your pattern to use less memory if you can.
+.P
+One way of reducing the memory usage for such patterns is to make use of PCRE's
+.\" HTML <a href="pcrepattern.html#subpatternsassubroutines">
+.\" </a>
+"subroutine"
+.\"
+facility. Re-writing the above pattern as
+.sp
+  ((ab)(?2){0,999}c)(?1){0,2}
+.sp
+reduces the memory requirements to 18K, and indeed it remains under 20K even
+with the outer repetition increased to 100. However, this pattern is not
+exactly equivalent, because the "subroutine" calls are treated as
+.\" HTML <a href="pcrepattern.html#atomicgroup">
+.\" </a>
+atomic groups
+.\"
+into which there can be no backtracking if there is a subsequent matching
+failure. Therefore, PCRE cannot do this kind of rewriting automatically.
+Furthermore, there is a noticeable loss of speed when executing the modified
+pattern. Nevertheless, if the atomic grouping is not a problem and the loss of
+speed is acceptable, this kind of rewriting will allow you to process patterns
+that PCRE cannot otherwise handle.
+.
+.
+.SH "STACK USAGE AT RUN TIME"
+.rs
+.sp
+When \fBpcre_exec()\fP or \fBpcre[16|32]_exec()\fP is used for matching, certain
+kinds of pattern can cause it to use large amounts of the process stack. In
+some environments the default process stack is quite small, and if it runs out
+the result is often SIGSEGV. This issue is probably the most frequently raised
+problem with PCRE. Rewriting your pattern can often help. The
+.\" HREF
+\fBpcrestack\fP
+.\"
+documentation discusses this issue in detail.
+.
+.
+.SH "PROCESSING TIME"
+.rs
+.sp
+Certain items in regular expression patterns are processed more efficiently
+than others. It is more efficient to use a character class like [aeiou] than a
+set of single-character alternatives such as (a|e|i|o|u). In general, the
+simplest construction that provides the required behaviour is usually the most
+efficient. Jeffrey Friedl's book contains a lot of useful general discussion
+about optimizing regular expressions for efficient performance. This document
+contains a few observations about PCRE.
+.P
+Using Unicode character properties (the \ep, \eP, and \eX escapes) is slow,
+because PCRE has to use a multi-stage table lookup whenever it needs a
+character's property. If you can find an alternative pattern that does not use
+character properties, it will probably be faster.
+.P
+By default, the escape sequences \eb, \ed, \es, and \ew, and the POSIX
+character classes such as [:alpha:] do not use Unicode properties, partly for
+backwards compatibility, and partly for performance reasons. However, you can
+set PCRE_UCP if you want Unicode character properties to be used. This can
+double the matching time for items such as \ed, when matched with
+a traditional matching function; the performance loss is less with
+a DFA matching function, and in both cases there is not much difference for
+\eb.
+.P
+When a pattern begins with .* not in parentheses, or in parentheses that are
+not the subject of a backreference, and the PCRE_DOTALL option is set, the
+pattern is implicitly anchored by PCRE, since it can match only at the start of
+a subject string. However, if PCRE_DOTALL is not set, PCRE cannot make this
+optimization, because the . metacharacter does not then match a newline, and if
+the subject string contains newlines, the pattern may match from the character
+immediately following one of them instead of from the very start. For example,
+the pattern
+.sp
+  .*second
+.sp
+matches the subject "first\enand second" (where \en stands for a newline
+character), with the match starting at the seventh character. In order to do
+this, PCRE has to retry the match starting after every newline in the subject.
+.P
+If you are using such a pattern with subject strings that do not contain
+newlines, the best performance is obtained by setting PCRE_DOTALL, or starting
+the pattern with ^.* or ^.*? to indicate explicit anchoring. That saves PCRE
+from having to scan along the subject looking for a newline to restart at.
+.P
+Beware of patterns that contain nested indefinite repeats. These can take a
+long time to run when applied to a string that does not match. Consider the
+pattern fragment
+.sp
+  ^(a+)*
+.sp
+This can match "aaaa" in 16 different ways, and this number increases very
+rapidly as the string gets longer. (The * repeat can match 0, 1, 2, 3, or 4
+times, and for each of those cases other than 0 or 4, the + repeats can match
+different numbers of times.) When the remainder of the pattern is such that the
+entire match is going to fail, PCRE has in principle to try every possible
+variation, and this can take an extremely long time, even for relatively short
+strings.
+.P
+An optimization catches some of the more simple cases such as
+.sp
+  (a+)*b
+.sp
+where a literal character follows. Before embarking on the standard matching
+procedure, PCRE checks that there is a "b" later in the subject string, and if
+there is not, it fails the match immediately. However, when there is no
+following literal this optimization cannot be used. You can see the difference
+by comparing the behaviour of
+.sp
+  (a+)*\ed
+.sp
+with the pattern above. The former gives a failure almost instantly when
+applied to a whole line of "a" characters, whereas the latter takes an
+appreciable time with strings longer than about 20 characters.
+.P
+In many cases, the solution to this kind of performance issue is to use an
+atomic group or a possessive quantifier.
+.
+.
+.SH AUTHOR
+.rs
+.sp
+.nf
+Philip Hazel
+University Computing Service
+Cambridge CB2 3QH, England.
+.fi
+.
+.
+.SH REVISION
+.rs
+.sp
+.nf
+Last updated: 25 August 2012
+Copyright (c) 1997-2012 University of Cambridge.
+.fi

data/vendor/local/share/man/man3/pcreposix.3

@@ -0,0 +1,267 @@
+.TH PCREPOSIX 3 "09 January 2012" "PCRE 8.30"
+.SH NAME
+PCRE - Perl-compatible regular expressions.
+.SH "SYNOPSIS"
+.rs
+.sp
+.B #include <pcreposix.h>
+.PP
+.nf
+.B int regcomp(regex_t *\fIpreg\fP, const char *\fIpattern\fP,
+.B "     int \fIcflags\fP);"
+.sp
+.B int regexec(regex_t *\fIpreg\fP, const char *\fIstring\fP,
+.B "     size_t \fInmatch\fP, regmatch_t \fIpmatch\fP[], int \fIeflags\fP);"
+.B "     size_t regerror(int \fIerrcode\fP, const regex_t *\fIpreg\fP,"
+.B "     char *\fIerrbuf\fP, size_t \fIerrbuf_size\fP);"
+.sp
+.B void regfree(regex_t *\fIpreg\fP);
+.fi
+.
+.SH DESCRIPTION
+.rs
+.sp
+This set of functions provides a POSIX-style API for the PCRE regular
+expression 8-bit library. See the
+.\" HREF
+\fBpcreapi\fP
+.\"
+documentation for a description of PCRE's native API, which contains much
+additional functionality. There is no POSIX-style wrapper for PCRE's 16-bit
+and 32-bit library.
+.P
+The functions described here are just wrapper functions that ultimately call
+the PCRE native API. Their prototypes are defined in the \fBpcreposix.h\fP
+header file, and on Unix systems the library itself is called
+\fBpcreposix.a\fP, so can be accessed by adding \fB-lpcreposix\fP to the
+command for linking an application that uses them. Because the POSIX functions
+call the native ones, it is also necessary to add \fB-lpcre\fP.
+.P
+I have implemented only those POSIX option bits that can be reasonably mapped
+to PCRE native options. In addition, the option REG_EXTENDED is defined with
+the value zero. This has no effect, but since programs that are written to the
+POSIX interface often use it, this makes it easier to slot in PCRE as a
+replacement library. Other POSIX options are not even defined.
+.P
+There are also some other options that are not defined by POSIX. These have
+been added at the request of users who want to make use of certain
+PCRE-specific features via the POSIX calling interface.
+.P
+When PCRE is called via these functions, it is only the API that is POSIX-like
+in style. The syntax and semantics of the regular expressions themselves are
+still those of Perl, subject to the setting of various PCRE options, as
+described below. "POSIX-like in style" means that the API approximates to the
+POSIX definition; it is not fully POSIX-compatible, and in multi-byte encoding
+domains it is probably even less compatible.
+.P
+The header for these functions is supplied as \fBpcreposix.h\fP to avoid any
+potential clash with other POSIX libraries. It can, of course, be renamed or
+aliased as \fBregex.h\fP, which is the "correct" name. It provides two
+structure types, \fIregex_t\fP for compiled internal forms, and
+\fIregmatch_t\fP for returning captured substrings. It also defines some
+constants whose names start with "REG_"; these are used for setting options and
+identifying error codes.
+.
+.
+.SH "COMPILING A PATTERN"
+.rs
+.sp
+The function \fBregcomp()\fP is called to compile a pattern into an
+internal form. The pattern is a C string terminated by a binary zero, and
+is passed in the argument \fIpattern\fP. The \fIpreg\fP argument is a pointer
+to a \fBregex_t\fP structure that is used as a base for storing information
+about the compiled regular expression.
+.P
+The argument \fIcflags\fP is either zero, or contains one or more of the bits
+defined by the following macros:
+.sp
+  REG_DOTALL
+.sp
+The PCRE_DOTALL option is set when the regular expression is passed for
+compilation to the native function. Note that REG_DOTALL is not part of the
+POSIX standard.
+.sp
+  REG_ICASE
+.sp
+The PCRE_CASELESS option is set when the regular expression is passed for
+compilation to the native function.
+.sp
+  REG_NEWLINE
+.sp
+The PCRE_MULTILINE option is set when the regular expression is passed for
+compilation to the native function. Note that this does \fInot\fP mimic the
+defined POSIX behaviour for REG_NEWLINE (see the following section).
+.sp
+  REG_NOSUB
+.sp
+The PCRE_NO_AUTO_CAPTURE option is set when the regular expression is passed
+for compilation to the native function. In addition, when a pattern that is
+compiled with this flag is passed to \fBregexec()\fP for matching, the
+\fInmatch\fP and \fIpmatch\fP arguments are ignored, and no captured strings
+are returned.
+.sp
+  REG_UCP
+.sp
+The PCRE_UCP option is set when the regular expression is passed for
+compilation to the native function. This causes PCRE to use Unicode properties
+when matchine \ed, \ew, etc., instead of just recognizing ASCII values. Note
+that REG_UTF8 is not part of the POSIX standard.
+.sp
+  REG_UNGREEDY
+.sp
+The PCRE_UNGREEDY option is set when the regular expression is passed for
+compilation to the native function. Note that REG_UNGREEDY is not part of the
+POSIX standard.
+.sp
+  REG_UTF8
+.sp
+The PCRE_UTF8 option is set when the regular expression is passed for
+compilation to the native function. This causes the pattern itself and all data
+strings used for matching it to be treated as UTF-8 strings. Note that REG_UTF8
+is not part of the POSIX standard.
+.P
+In the absence of these flags, no options are passed to the native function.
+This means the the regex is compiled with PCRE default semantics. In
+particular, the way it handles newline characters in the subject string is the
+Perl way, not the POSIX way. Note that setting PCRE_MULTILINE has only
+\fIsome\fP of the effects specified for REG_NEWLINE. It does not affect the way
+newlines are matched by . (they are not) or by a negative class such as [^a]
+(they are).
+.P
+The yield of \fBregcomp()\fP is zero on success, and non-zero otherwise. The
+\fIpreg\fP structure is filled in on success, and one member of the structure
+is public: \fIre_nsub\fP contains the number of capturing subpatterns in
+the regular expression. Various error codes are defined in the header file.
+.P
+NOTE: If the yield of \fBregcomp()\fP is non-zero, you must not attempt to
+use the contents of the \fIpreg\fP structure. If, for example, you pass it to
+\fBregexec()\fP, the result is undefined and your program is likely to crash.
+.
+.
+.SH "MATCHING NEWLINE CHARACTERS"
+.rs
+.sp
+This area is not simple, because POSIX and Perl take different views of things.
+It is not possible to get PCRE to obey POSIX semantics, but then PCRE was never
+intended to be a POSIX engine. The following table lists the different
+possibilities for matching newline characters in PCRE:
+.sp
+                          Default   Change with
+.sp
+  . matches newline          no     PCRE_DOTALL
+  newline matches [^a]       yes    not changeable
+  $ matches \en at end        yes    PCRE_DOLLARENDONLY
+  $ matches \en in middle     no     PCRE_MULTILINE
+  ^ matches \en in middle     no     PCRE_MULTILINE
+.sp
+This is the equivalent table for POSIX:
+.sp
+                          Default   Change with
+.sp
+  . matches newline          yes    REG_NEWLINE
+  newline matches [^a]       yes    REG_NEWLINE
+  $ matches \en at end        no     REG_NEWLINE
+  $ matches \en in middle     no     REG_NEWLINE
+  ^ matches \en in middle     no     REG_NEWLINE
+.sp
+PCRE's behaviour is the same as Perl's, except that there is no equivalent for
+PCRE_DOLLAR_ENDONLY in Perl. In both PCRE and Perl, there is no way to stop
+newline from matching [^a].
+.P
+The default POSIX newline handling can be obtained by setting PCRE_DOTALL and
+PCRE_DOLLAR_ENDONLY, but there is no way to make PCRE behave exactly as for the
+REG_NEWLINE action.
+.
+.
+.SH "MATCHING A PATTERN"
+.rs
+.sp
+The function \fBregexec()\fP is called to match a compiled pattern \fIpreg\fP
+against a given \fIstring\fP, which is by default terminated by a zero byte
+(but see REG_STARTEND below), subject to the options in \fIeflags\fP. These can
+be:
+.sp
+  REG_NOTBOL
+.sp
+The PCRE_NOTBOL option is set when calling the underlying PCRE matching
+function.
+.sp
+  REG_NOTEMPTY
+.sp
+The PCRE_NOTEMPTY option is set when calling the underlying PCRE matching
+function. Note that REG_NOTEMPTY is not part of the POSIX standard. However,
+setting this option can give more POSIX-like behaviour in some situations.
+.sp
+  REG_NOTEOL
+.sp
+The PCRE_NOTEOL option is set when calling the underlying PCRE matching
+function.
+.sp
+  REG_STARTEND
+.sp
+The string is considered to start at \fIstring\fP + \fIpmatch[0].rm_so\fP and
+to have a terminating NUL located at \fIstring\fP + \fIpmatch[0].rm_eo\fP
+(there need not actually be a NUL at that location), regardless of the value of
+\fInmatch\fP. This is a BSD extension, compatible with but not specified by
+IEEE Standard 1003.2 (POSIX.2), and should be used with caution in software
+intended to be portable to other systems. Note that a non-zero \fIrm_so\fP does
+not imply REG_NOTBOL; REG_STARTEND affects only the location of the string, not
+how it is matched.
+.P
+If the pattern was compiled with the REG_NOSUB flag, no data about any matched
+strings is returned. The \fInmatch\fP and \fIpmatch\fP arguments of
+\fBregexec()\fP are ignored.
+.P
+If the value of \fInmatch\fP is zero, or if the value \fIpmatch\fP is NULL,
+no data about any matched strings is returned.
+.P
+Otherwise,the portion of the string that was matched, and also any captured
+substrings, are returned via the \fIpmatch\fP argument, which points to an
+array of \fInmatch\fP structures of type \fIregmatch_t\fP, containing the
+members \fIrm_so\fP and \fIrm_eo\fP. These contain the offset to the first
+character of each substring and the offset to the first character after the end
+of each substring, respectively. The 0th element of the vector relates to the
+entire portion of \fIstring\fP that was matched; subsequent elements relate to
+the capturing subpatterns of the regular expression. Unused entries in the
+array have both structure members set to -1.
+.P
+A successful match yields a zero return; various error codes are defined in the
+header file, of which REG_NOMATCH is the "expected" failure code.
+.
+.
+.SH "ERROR MESSAGES"
+.rs
+.sp
+The \fBregerror()\fP function maps a non-zero errorcode from either
+\fBregcomp()\fP or \fBregexec()\fP to a printable message. If \fIpreg\fP is not
+NULL, the error should have arisen from the use of that structure. A message
+terminated by a binary zero is placed in \fIerrbuf\fP. The length of the
+message, including the zero, is limited to \fIerrbuf_size\fP. The yield of the
+function is the size of buffer needed to hold the whole message.
+.
+.
+.SH MEMORY USAGE
+.rs
+.sp
+Compiling a regular expression causes memory to be allocated and associated
+with the \fIpreg\fP structure. The function \fBregfree()\fP frees all such
+memory, after which \fIpreg\fP may no longer be used as a compiled expression.
+.
+.
+.SH AUTHOR
+.rs
+.sp
+.nf
+Philip Hazel
+University Computing Service
+Cambridge CB2 3QH, England.
+.fi
+.
+.
+.SH REVISION
+.rs
+.sp
+.nf
+Last updated: 09 January 2012
+Copyright (c) 1997-2012 University of Cambridge.
+.fi

data/vendor/local/share/man/man3/pcreprecompile.3

@@ -0,0 +1,155 @@
+.TH PCREPRECOMPILE 3 "12 November 2013" "PCRE 8.34"
+.SH NAME
+PCRE - Perl-compatible regular expressions
+.SH "SAVING AND RE-USING PRECOMPILED PCRE PATTERNS"
+.rs
+.sp
+If you are running an application that uses a large number of regular
+expression patterns, it may be useful to store them in a precompiled form
+instead of having to compile them every time the application is run.
+If you are not using any private character tables (see the
+.\" HREF
+\fBpcre_maketables()\fP
+.\"
+documentation), this is relatively straightforward. If you are using private
+tables, it is a little bit more complicated. However, if you are using the
+just-in-time optimization feature, it is not possible to save and reload the
+JIT data.
+.P
+If you save compiled patterns to a file, you can copy them to a different host
+and run them there. If the two hosts have different endianness (byte order),
+you should run the \fBpcre[16|32]_pattern_to_host_byte_order()\fP function on the
+new host before trying to match the pattern. The matching functions return
+PCRE_ERROR_BADENDIANNESS if they detect a pattern with the wrong endianness.
+.P
+Compiling regular expressions with one version of PCRE for use with a different
+version is not guaranteed to work and may cause crashes, and saving and
+restoring a compiled pattern loses any JIT optimization data.
+.
+.
+.SH "SAVING A COMPILED PATTERN"
+.rs
+.sp
+The value returned by \fBpcre[16|32]_compile()\fP points to a single block of
+memory that holds the compiled pattern and associated data. You can find the
+length of this block in bytes by calling \fBpcre[16|32]_fullinfo()\fP with an
+argument of PCRE_INFO_SIZE. You can then save the data in any appropriate
+manner. Here is sample code for the 8-bit library that compiles a pattern and
+writes it to a file. It assumes that the variable \fIfd\fP refers to a file
+that is open for output:
+.sp
+  int erroroffset, rc, size;
+  char *error;
+  pcre *re;
+.sp
+  re = pcre_compile("my pattern", 0, &error, &erroroffset, NULL);
+  if (re == NULL) { ... handle errors ... }
+  rc = pcre_fullinfo(re, NULL, PCRE_INFO_SIZE, &size);
+  if (rc < 0) { ... handle errors ... }
+  rc = fwrite(re, 1, size, fd);
+  if (rc != size) { ... handle errors ... }
+.sp
+In this example, the bytes that comprise the compiled pattern are copied
+exactly. Note that this is binary data that may contain any of the 256 possible
+byte values. On systems that make a distinction between binary and non-binary
+data, be sure that the file is opened for binary output.
+.P
+If you want to write more than one pattern to a file, you will have to devise a
+way of separating them. For binary data, preceding each pattern with its length
+is probably the most straightforward approach. Another possibility is to write
+out the data in hexadecimal instead of binary, one pattern to a line.
+.P
+Saving compiled patterns in a file is only one possible way of storing them for
+later use. They could equally well be saved in a database, or in the memory of
+some daemon process that passes them via sockets to the processes that want
+them.
+.P
+If the pattern has been studied, it is also possible to save the normal study
+data in a similar way to the compiled pattern itself. However, if the
+PCRE_STUDY_JIT_COMPILE was used, the just-in-time data that is created cannot
+be saved because it is too dependent on the current environment. When studying
+generates additional information, \fBpcre[16|32]_study()\fP returns a pointer to a
+\fBpcre[16|32]_extra\fP data block. Its format is defined in the
+.\" HTML <a href="pcreapi.html#extradata">
+.\" </a>
+section on matching a pattern
+.\"
+in the
+.\" HREF
+\fBpcreapi\fP
+.\"
+documentation. The \fIstudy_data\fP field points to the binary study data, and
+this is what you must save (not the \fBpcre[16|32]_extra\fP block itself). The
+length of the study data can be obtained by calling \fBpcre[16|32]_fullinfo()\fP
+with an argument of PCRE_INFO_STUDYSIZE. Remember to check that
+\fBpcre[16|32]_study()\fP did return a non-NULL value before trying to save the
+study data.
+.
+.
+.SH "RE-USING A PRECOMPILED PATTERN"
+.rs
+.sp
+Re-using a precompiled pattern is straightforward. Having reloaded it into main
+memory, called \fBpcre[16|32]_pattern_to_host_byte_order()\fP if necessary, you
+pass its pointer to \fBpcre[16|32]_exec()\fP or \fBpcre[16|32]_dfa_exec()\fP in
+the usual way.
+.P
+However, if you passed a pointer to custom character tables when the pattern
+was compiled (the \fItableptr\fP argument of \fBpcre[16|32]_compile()\fP), you
+must now pass a similar pointer to \fBpcre[16|32]_exec()\fP or
+\fBpcre[16|32]_dfa_exec()\fP, because the value saved with the compiled pattern
+will obviously be nonsense. A field in a \fBpcre[16|32]_extra()\fP block is used
+to pass this data, as described in the
+.\" HTML <a href="pcreapi.html#extradata">
+.\" </a>
+section on matching a pattern
+.\"
+in the
+.\" HREF
+\fBpcreapi\fP
+.\"
+documentation.
+.P
+\fBWarning:\fP The tables that \fBpcre_exec()\fP and \fBpcre_dfa_exec()\fP use
+must be the same as those that were used when the pattern was compiled. If this
+is not the case, the behaviour is undefined.
+.P
+If you did not provide custom character tables when the pattern was compiled,
+the pointer in the compiled pattern is NULL, which causes the matching
+functions to use PCRE's internal tables. Thus, you do not need to take any
+special action at run time in this case.
+.P
+If you saved study data with the compiled pattern, you need to create your own
+\fBpcre[16|32]_extra\fP data block and set the \fIstudy_data\fP field to point
+to the reloaded study data. You must also set the PCRE_EXTRA_STUDY_DATA bit in
+the \fIflags\fP field to indicate that study data is present. Then pass the
+\fBpcre[16|32]_extra\fP block to the matching function in the usual way. If the
+pattern was studied for just-in-time optimization, that data cannot be saved,
+and so is lost by a save/restore cycle.
+.
+.
+.SH "COMPATIBILITY WITH DIFFERENT PCRE RELEASES"
+.rs
+.sp
+In general, it is safest to recompile all saved patterns when you update to a
+new PCRE release, though not all updates actually require this.
+.
+.
+.
+.SH AUTHOR
+.rs
+.sp
+.nf
+Philip Hazel
+University Computing Service
+Cambridge CB2 3QH, England.
+.fi
+.
+.
+.SH REVISION
+.rs
+.sp
+.nf
+Last updated: 12 November 2013
+Copyright (c) 1997-2013 University of Cambridge.
+.fi