rroonga 4.0.1-x64-mingw32 → 4.0.2-x64-mingw32

data/vendor/local/share/doc/groonga/ja/html/_sources/development/travis-ci.txt

@@ -33,7 +33,7 @@ by Travis CI such as Ruby. You should use ``install`` otherwise.
 Add the following ``before_install`` configuration to ``.travis.yml``::
 
   before_install:
-    - curl https://raw.github.com/groonga/groonga/master/data/travis/setup.sh | sh
+    - curl --silent --location https://github.com/groonga/groonga/raw/master/data/travis/setup.sh | sh
 
 If you need to use ``install`` hook instead of ``before_install``, you
 just substitute ``before_install:`` with ``install:``.

data/vendor/local/share/doc/groonga/ja/html/_sources/install.txt

@@ -5,10 +5,10 @@
 Install
 =======
 
-This section describes how to install groonga on each
+This section describes how to install Groonga on each
 environment. There are packages for major platforms. It's recommended
-that you use package instead of building groonga by yourself. But
-don't warry. There is a document about building groonga from source.
+that you use package instead of building Groonga by yourself. But
+don't warry. There is a document about building Groonga from source.
 
 We distribute both 32-bit and 64-bit packages but we strongly
 recommend a 64-bit package for server. You should use a 32-bit package

data/vendor/local/share/doc/groonga/ja/html/_sources/install/centos.txt

@@ -5,7 +5,7 @@
 CentOS
 ======
 
-This section describes how to install groonga related RPM packages on
+This section describes how to install Groonga related RPM packages on
 CentOS. You can install them by ``yum``.
 
 We distribute both 32-bit and 64-bit packages but we strongly
@@ -80,7 +80,7 @@ If you want to use that one, install groonga-normalizer-mysql package.
 
 Install groonga-normalizer-mysql package::
 
-  % sudo yum install -y install groonga-normalizer-mysql
+  % sudo yum install -y groonga-normalizer-mysql
 
 CentOS 6
 --------
@@ -142,20 +142,20 @@ If you want to use that one, install groonga-normalizer-mysql package.
 
 Install groonga-normalizer-mysql package::
 
-  % sudo yum install -y install groonga-normalizer-mysql
+  % sudo yum install -y groonga-normalizer-mysql
 
 Build from source
 -----------------
 
-Install required packages to build groonga::
+Install required packages to build Groonga::
 
   % sudo yum install -y wget tar gcc-c++ make mecab-devel
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-4.0.1.tar.gz
-  % tar xvzf groonga-4.0.1.tar.gz
-  % cd groonga-4.0.1
+  % wget http://packages.groonga.org/source/groonga/groonga-4.0.2.tar.gz
+  % tar xvzf groonga-4.0.2.tar.gz
+  % cd groonga-4.0.2
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/debian.txt

@@ -29,16 +29,16 @@ Add the Groonga apt repository.
 Install::
 
   % sudo apt-get update
-  % sudo apt-get -y --allow-unauthenticated install groonga-keyring
+  % sudo apt-get install -y --allow-unauthenticated groonga-keyring
   % sudo apt-get update
-  % sudo apt-get -y install groonga
+  % sudo apt-get install -y -V groonga
 
 If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
 tokenizer, install groonga-tokenizer-mecab package.
 
 Install groonga-tokenizer-mecab package::
 
-  % sudo aptitude -V -D -y install groonga-tokenizer-mecab
+  % sudo apt-get install -y -V groonga-tokenizer-mecab
 
 There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
@@ -46,7 +46,7 @@ groonga status by Munin, install groonga-munin-plugins package.
 
 Install groonga-munin-plugins package::
 
-  % sudo aptitude -V -D -y install groonga-munin-plugins
+  % sudo apt-get install -y -V groonga-munin-plugins
 
 There is a package that provides MySQL compatible normalizer as
 groonga plugins.
@@ -54,7 +54,7 @@ If you want to use that one, install groonga-normalizer-mysql package.
 
 Install groonga-normalizer-mysql package::
 
-  % sudo aptitude -V -D -y install groonga-normalizer-mysql
+  % sudo apt-get install -y -V groonga-normalizer-mysql
 
 jessie
 ------
@@ -69,16 +69,16 @@ Add the groonga apt repository.
 Install::
 
   % sudo apt-get update
-  % sudo apt-get -y --allow-unauthenticated install groonga-keyring
+  % sudo apt-get install -y --allow-unauthenticated groonga-keyring
   % sudo apt-get update
-  % sudo apt-get -y install groonga
+  % sudo apt-get install -y groonga
 
 If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
 tokenizer, install groonga-tokenizer-mecab package.
 
 Install groonga-tokenizer-mecab package::
 
-  % sudo aptitude -V -D -y install groonga-tokenizer-mecab
+  % sudo apt-get install -y -V groonga-tokenizer-mecab
 
 There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
@@ -86,7 +86,7 @@ groonga status by Munin, install groonga-munin-plugins package.
 
 Install groonga-munin-plugins package::
 
-  % sudo aptitude -V -D -y install groonga-munin-plugins
+  % sudo apt-get install -y -V groonga-munin-plugins
 
 There is a package that provides MySQL compatible normalizer as
 Groonga plugins.
@@ -94,7 +94,7 @@ If you want to use that one, install groonga-normalizer-mysql package.
 
 Install groonga-normalizer-mysql package::
 
-  % sudo aptitude -V -D -y install groonga-normalizer-mysql
+  % sudo apt-get install -y -V groonga-normalizer-mysql
 
 sid
 ---
@@ -108,17 +108,17 @@ Add the groonga apt repository.
 
 Install::
 
-  % sudo aptitude update
-  % sudo aptitude -V -D -y --allow-untrusted install groonga-keyring
-  % sudo aptitude update
-  % sudo aptitude -V -D -y install groonga
+  % sudo apt-get update
+  % sudo apt-get install -y --allow-unauthenticated groonga-keyring
+  % sudo apt-get update
+  % sudo apt-get install -y -V groonga
 
 If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
 tokenizer, install groonga-tokenizer-mecab package.
 
 Install groonga-tokenizer-mecab package::
 
-  % sudo aptitude -V -D -y install groonga-tokenizer-mecab
+  % sudo apt-get install -y -V groonga-tokenizer-mecab
 
 There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
@@ -126,7 +126,7 @@ groonga status by Munin, install groonga-munin-plugins package.
 
 Install groonga-munin-plugins package::
 
-  % sudo aptitude -V -D -y install groonga-munin-plugins
+  % sudo apt-get install -y -V groonga-munin-plugins
 
 There is a package that provides MySQL compatible normalizer as
 groonga plugins.
@@ -134,20 +134,20 @@ If you want to use that one, install groonga-normalizer-mysql package.
 
 Install groonga-normalizer-mysql package::
 
-  % sudo aptitude -V -D -y install groonga-normalizer-mysql
+  % sudo apt-get install -y -V groonga-normalizer-mysql
 
 Build from source
 -----------------
 
-Install required packages to build groonga::
+Install required packages to build Groonga::
 
-  % sudo aptitude -V -D -y install wget tar build-essential zlib1g-dev liblzo2-dev libmsgpack-dev libzmq-dev libevent-dev libmecab-dev
+  % sudo apt-get install -y -V  wget tar build-essential zlib1g-dev liblzo2-dev libmsgpack-dev libzmq-dev libevent-dev libmecab-dev
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-4.0.1.tar.gz
-  % tar xvzf groonga-4.0.1.tar.gz
-  % cd groonga-4.0.1
+  % wget http://packages.groonga.org/source/groonga/groonga-4.0.2.tar.gz
+  % tar xvzf groonga-4.0.2.tar.gz
+  % cd groonga-4.0.2
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/fedora.txt

@@ -5,7 +5,7 @@
 Fedora
 ======
 
-This section describes how to install groonga related RPM packages on
+This section describes how to install Groonga related RPM packages on
 Fedora. You can install them by ``yum``.
 
 .. note::
@@ -76,15 +76,15 @@ Install groonga-normalizer-mysql package::
 Build from source
 -----------------
 
-Install required packages to build groonga::
+Install required packages to build Groonga::
 
   % sudo yum install -y wget tar gcc-c++ make mecab-devel libedit-devel
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-4.0.1.tar.gz
-  % tar xvzf groonga-4.0.1.tar.gz
-  % cd groonga-4.0.1
+  % wget http://packages.groonga.org/source/groonga/groonga-4.0.2.tar.gz
+  % tar xvzf groonga-4.0.2.tar.gz
+  % cd groonga-4.0.2
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/mac_os_x.txt

@@ -5,16 +5,10 @@
 Mac OS X
 ========
 
-This section describes how to install groonga on Mac OS X. You can
-install groonga by `MacPorts <http://www.macports.org/>`_ or `Homebrew
+This section describes how to install Groonga on Mac OS X. You can
+install Groonga by `MacPorts <http://www.macports.org/>`_ or `Homebrew
 <http://mxcl.github.com/homebrew/>`_.
 
-We distribute both 32-bit and 64-bit packages but we strongly
-recommend a 64-bit package for server. You should use a 32-bit package
-just only for tests or development. You will encounter an out of
-memory error with a 32-bit package even if you just process medium
-size data.
-
 .. _macports:
 
 MacPorts
@@ -33,6 +27,11 @@ Install::
 
   % brew install groonga
 
+If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
+tokenizer, specify ``--with-mecab`` option::
+
+  % brew install groonga --with-mecab
+
 Build from source
 -----------------
 
@@ -40,9 +39,9 @@ Install `Xcode <https://developer.apple.com/xcode/>`_.
 
 Download source::
 
-  % curl -O http://packages.groonga.org/source/groonga/groonga-4.0.1.tar.gz
-  % tar xvzf groonga-4.0.1.tar.gz
-  % cd groonga-4.0.1
+  % curl -O http://packages.groonga.org/source/groonga/groonga-4.0.2.tar.gz
+  % tar xvzf groonga-4.0.2.tar.gz
+  % cd groonga-4.0.2
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/others.txt

@@ -5,10 +5,10 @@
 Others
 ======
 
-This section describes how to install groonga from source on UNIX like
+This section describes how to install Groonga from source on UNIX like
 environment.
 
-To get more detail about installing groonga from source on the
+To get more detail about installing Groonga from source on the
 specific environment, find the document for the specific environment
 from :doc:`/install`.
 
@@ -66,7 +66,7 @@ All libraries are optional. Here are optional libraries:
     column value
 
 If you want to use those all or some libraries, you need to install
-them before installing groonga.
+them before installing Groonga.
 
 Build from source
 -----------------
@@ -74,9 +74,9 @@ Build from source
 Groonga uses GNU build system. So the following is the simplest build
 steps::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-4.0.1.tar.gz
-  % tar xvzf groonga-4.0.1.tar.gz
-  % cd groonga-4.0.1
+  % wget http://packages.groonga.org/source/groonga/groonga-4.0.2.tar.gz
+  % tar xvzf groonga-4.0.2.tar.gz
+  % cd groonga-4.0.2
   % ./configure
   % make
   % sudo make install
@@ -106,7 +106,7 @@ installed under ``${PATH}/`` directory.
 The default is ``/usr/local``. In this case, :doc:`/reference/executables/groonga` is
 installed into ``/usr/local/bin/groonga``.
 
-Here is an example that installs groonga into ``~/local`` for an user
+Here is an example that installs Groonga into ``~/local`` for an user
 use instead of system wide use::
 
   % ./configure --prefix=$HOME/local
@@ -221,12 +221,12 @@ Here is an example that uses MessagePack built with
 ``--with-munin-plugins``
 ++++++++++++++++++++++++
 
-Installs Munin plugins for groonga. They are installed into
+Installs Munin plugins for Groonga. They are installed into
 ``${PREFIX}/share/groonga/munin/plugins/``.
 
 Those plugins are not installed by default.
 
-Here is an example that installs Munin plugins for groonga::
+Here is an example that installs Munin plugins for Groonga::
 
   % ./configure --with-munin-plugins
 
@@ -268,7 +268,7 @@ If you get some errors by ``make``, please report them to us:
 ``make install``
 ^^^^^^^^^^^^^^^^
 
-Now, you can install built groonga!::
+Now, you can install built Groonga!::
 
   % sudo make install
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/solaris.txt

@@ -11,15 +11,15 @@ Solaris.
 Oracle Solaris 11
 -----------------
 
-Install required packages to build groonga::
+Install required packages to build Groonga::
 
   % sudo pkg install gnu-tar gcc-45 system/header
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-4.0.1.tar.gz
-  % gtar xvzf groonga-4.0.1.tar.gz
-  % cd groonga-4.0.1
+  % wget http://packages.groonga.org/source/groonga/groonga-4.0.2.tar.gz
+  % gtar xvzf groonga-4.0.2.tar.gz
+  % cd groonga-4.0.2
 
 Configure with ``CFLAGS="-m64" CXXFLAGS="-m64"`` variables. They are
 needed for building 64-bit version. To build 32-bit version, just

data/vendor/local/share/doc/groonga/ja/html/_sources/install/ubuntu.txt

@@ -16,122 +16,30 @@ size data.
 
 .. include:: server-use.inc
 
-12.04 LTS Precise Pangolin
---------------------------
+PPA (Personal Package Archive)
+------------------------------
 
-.. note::
+The Groonga APT repository for Ubuntu uses PPA (Personal Package
+Archive) on Launchpad. You can install Groonga by APT from the PPA.
 
-   Enable the universe repository to install groonga::
+Here are supported Ubuntu versions:
 
-     % sudo cp /etc/apt/sources.list /etc/apt/sources.list.d/universe.list
-     % sudo sed -i'' -e 's/main/universe/' /etc/apt/sources.list.d/universe.list
+  * 12.04 LTS Precise Pangolin
+  * 13.10 Saucy Salamander
+  * 14.04 LTS Trusty Tahr
 
-Add the Groonga apt repository.
+Enable the universe repository to install Groonga::
 
-/etc/apt/sources.list.d/groonga.list::
+  % sudo apt-get -y install software-properties-common
+  % sudo add-apt-repository -y universe
 
-  deb http://packages.groonga.org/ubuntu/ precise universe
-  deb-src http://packages.groonga.org/ubuntu/ precise universe
-
-Install::
+Add the ``ppa:groonga/ppa`` PPA to your system::
 
+  % sudo add-apt-repository -y ppa:groonga/ppa
   % sudo apt-get update
-  % sudo apt-get -y --allow-unauthenticated install groonga-keyring
-  % sudo apt-get update
-  % sudo apt-get -y install groonga
-
-If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
-tokenizer, install groonga-tokenizer-mecab package.
-
-Install groonga-tokenizer-mecab package::
-
-  % sudo apt-get -y install groonga-tokenizer-mecab
-
-There is a package that provides `Munin
-<http://munin-monitoring.org/>`_ plugins. If you want to monitor
-groonga status by Munin, install groonga-munin-plugins package.
-
-Install groonga-munin-plugins package::
-
-  % sudo apt-get -y install groonga-munin-plugins
-
-There is a package that provides MySQL compatible normalizer as
-Groonga plugins.
-If you want to use that one, install groonga-normalizer-mysql package.
-
-Install groonga-normalizer-mysql package::
-
-  % sudo apt-get -y install groonga-normalizer-mysql
-
-12.10 Quantal Quetzal
----------------------
-
-.. note::
-
-   Enable the universe repository to install groonga::
-
-     % sudo cp /etc/apt/sources.list /etc/apt/sources.list.d/universe.list
-     % sudo sed -i'' -e 's/main/universe/' /etc/apt/sources.list.d/universe.list
-
-Add the Groonga apt repository.
-
-/etc/apt/sources.list.d/groonga.list::
-
-  deb http://packages.groonga.org/ubuntu/ quantal universe
-  deb-src http://packages.groonga.org/ubuntu/ quantal universe
-
-Install::
-
-  % sudo apt-get update
-  % sudo apt-get -y --allow-unauthenticated install groonga-keyring
-  % sudo apt-get update
-  % sudo apt-get -y install groonga
-
-If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
-tokenizer, install groonga-tokenizer-mecab package.
-
-Install groonga-tokenizer-mecab package::
-
-  % sudo apt-get -y install groonga-tokenizer-mecab
-
-There is a package that provides `Munin
-<http://munin-monitoring.org/>`_ plugins. If you want to monitor
-Groonga status by Munin, install groonga-munin-plugins package.
-
-Install groonga-munin-plugins package::
-
-  % sudo apt-get -y install groonga-munin-plugins
-
-There is a package that provides MySQL compatible normalizer as
-Groonga plugins.
-If you want to use that one, install groonga-normalizer-mysql package.
-
-Install groonga-normalizer-mysql package::
-
-  % sudo apt-get -y install groonga-normalizer-mysql
-
-13.04 Raring Ringtail
----------------------
-
-.. note::
-
-   Enable the universe repository to install groonga::
-
-     % sudo cp /etc/apt/sources.list /etc/apt/sources.list.d/universe.list
-     % sudo sed -i'' -e 's/main/universe/' /etc/apt/sources.list.d/universe.list
-
-Add the Groonga apt repository.
-
-/etc/apt/sources.list.d/groonga.list::
-
-  deb http://packages.groonga.org/ubuntu/ raring universe
-  deb-src http://packages.groonga.org/ubuntu/ raring universe
 
 Install::
 
-  % sudo apt-get update
-  % sudo apt-get -y --allow-unauthenticated install groonga-keyring
-  % sudo apt-get update
   % sudo apt-get -y install groonga
 
 If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
@@ -145,46 +53,6 @@ There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
 groonga status by Munin, install groonga-munin-plugins package.
 
-Install groonga-munin-plugins package::
-
-  % sudo apt-get -y install groonga-munin-plugins
-
-There is a package that provides MySQL compatible normalizer as
-groonga plugins.
-If you want to use that one, install groonga-normalizer-mysql package.
-
-Install groonga-normalizer-mysql package::
-
-  % sudo apt-get -y install groonga-normalizer-mysql
-
-13.10 Saucy Salamander
-----------------------
-
-Add the Groonga apt repository.
-
-/etc/apt/sources.list.d/groonga.list::
-
-  deb http://packages.groonga.org/ubuntu/ saucy universe
-  deb-src http://packages.groonga.org/ubuntu/ saucy universe
-
-Install::
-
-  % sudo apt-get update
-  % sudo apt-get -y --allow-unauthenticated install groonga-keyring
-  % sudo apt-get update
-  % sudo apt-get -y install groonga
-
-If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
-tokenizer, install groonga-tokenizer-mecab package.
-
-Install groonga-tokenizer-mecab package::
-
-  % sudo apt-get -y install groonga-tokenizer-mecab
-
-There is a package that provides `Munin
-<http://munin-monitoring.org/>`_ plugins. If you want to monitor
-Groonga status by Munin, install groonga-munin-plugins package.
-
 Install groonga-munin-plugins package::
 
   % sudo apt-get -y install groonga-munin-plugins
@@ -200,15 +68,15 @@ Install groonga-normalizer-mysql package::
 Build from source
 -----------------
 
-Install required packages to build groonga::
+Install required packages to build Groonga::
 
   % sudo apt-get -V -y install wget tar build-essential zlib1g-dev liblzo2-dev libmsgpack-dev libzmq-dev libevent-dev libmecab-dev
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-4.0.1.tar.gz
-  % tar xvzf groonga-4.0.1.tar.gz
-  % cd groonga-4.0.1
+  % wget http://packages.groonga.org/source/groonga/groonga-4.0.2.tar.gz
+  % tar xvzf groonga-4.0.2.tar.gz
+  % cd groonga-4.0.2
 
 Configure (see :ref:`source-configure` about ``configure`` options)::