rroonga 3.1.1-x64-mingw32 → 3.1.2-x64-mingw32

data/vendor/local/share/doc/groonga/ja/html/_sources/install/solaris.txt

@@ -5,7 +5,7 @@
 Oracle Solaris
 ==============
 
-This section describes how to install groonga from source on Oracle
+This section describes how to install Groonga from source on Oracle
 Solaris.
 
 Oracle Solaris 11
@@ -17,9 +17,9 @@ Install required packages to build groonga::
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-3.1.1.tar.gz
-  % gtar xvzf groonga-3.1.1.tar.gz
-  % cd groonga-3.1.1
+  % wget http://packages.groonga.org/source/groonga/groonga-3.1.2.tar.gz
+  % gtar xvzf groonga-3.1.2.tar.gz
+  % cd groonga-3.1.2
 
 Configure with ``CFLAGS="-m64" CXXFLAGS="-m64"`` variables. They are
 needed for building 64-bit version. To build 32-bit version, just

data/vendor/local/share/doc/groonga/ja/html/_sources/install/ubuntu.txt

@@ -5,7 +5,7 @@
 Ubuntu
 ======
 
-This section describes how to install groonga related deb packages on
+This section describes how to install Groonga related deb packages on
 Ubuntu. You can install them by ``apt``.
 
 We distribute both 32-bit and 64-bit packages but we strongly
@@ -26,7 +26,7 @@ size data.
      % sudo cp /etc/apt/sources.list /etc/apt/sources.list.d/universe.list
      % sudo sed -i'' -e 's/main/universe/' /etc/apt/sources.list.d/universe.list
 
-Add the groonga apt repository.
+Add the Groonga apt repository.
 
 /etc/apt/sources.list.d/groonga.list::
 
@@ -56,7 +56,7 @@ Install groonga-munin-plugins package::
   % sudo apt-get -y install groonga-munin-plugins
 
 There is a package that provides MySQL compatible normalizer as
-groonga plugins.
+Groonga plugins.
 If you want to use that one, install groonga-normalizer-mysql package.
 
 Install groonga-normalizer-mysql package::
@@ -73,7 +73,7 @@ Install groonga-normalizer-mysql package::
      % sudo cp /etc/apt/sources.list /etc/apt/sources.list.d/universe.list
      % sudo sed -i'' -e 's/main/universe/' /etc/apt/sources.list.d/universe.list
 
-Add the groonga apt repository.
+Add the Groonga apt repository.
 
 /etc/apt/sources.list.d/groonga.list::
 
@@ -96,14 +96,14 @@ Install groonga-tokenizer-mecab package::
 
 There is a package that provides `Munin
 <http://munin-monitoring.org/>`_ plugins. If you want to monitor
-groonga status by Munin, install groonga-munin-plugins package.
+Groonga status by Munin, install groonga-munin-plugins package.
 
 Install groonga-munin-plugins package::
 
   % sudo apt-get -y install groonga-munin-plugins
 
 There is a package that provides MySQL compatible normalizer as
-groonga plugins.
+Groonga plugins.
 If you want to use that one, install groonga-normalizer-mysql package.
 
 Install groonga-normalizer-mysql package::
@@ -120,7 +120,7 @@ Install groonga-normalizer-mysql package::
      % sudo cp /etc/apt/sources.list /etc/apt/sources.list.d/universe.list
      % sudo sed -i'' -e 's/main/universe/' /etc/apt/sources.list.d/universe.list
 
-Add the groonga apt repository.
+Add the Groonga apt repository.
 
 /etc/apt/sources.list.d/groonga.list::
 
@@ -206,9 +206,9 @@ Install required packages to build groonga::
 
 Download source::
 
-  % wget http://packages.groonga.org/source/groonga/groonga-3.1.1.tar.gz
-  % tar xvzf groonga-3.1.1.tar.gz
-  % cd groonga-3.1.1
+  % wget http://packages.groonga.org/source/groonga/groonga-3.1.2.tar.gz
+  % tar xvzf groonga-3.1.2.tar.gz
+  % cd groonga-3.1.2
 
 Configure (see :ref:`source-configure` about ``configure`` options)::
 

data/vendor/local/share/doc/groonga/ja/html/_sources/install/windows.txt

@@ -1,4 +1,5 @@
 .. -*- rst -*-
+.. Groonga Project
 
 .. highlightlang:: none
 
@@ -20,14 +21,14 @@ Installer
 For 32-bit environment, download x86 executable binary from
 packages.groonga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-3.1.1-x86.exe
+  * http://packages.groonga.org/windows/groonga/groonga-3.1.2-x86.exe
 
 Then run it.
 
 For 64-bit environment, download x64 executable binary from
 packages.goronga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-3.1.1-x64.exe
+  * http://packages.groonga.org/windows/groonga/groonga-3.1.2-x64.exe
 
 Then run it.
 
@@ -40,14 +41,14 @@ zip
 For 32-bit environment, download x86 zip archive from
 packages.groonga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-3.1.1-x86.zip
+  * http://packages.groonga.org/windows/groonga/groonga-3.1.2-x86.zip
 
 Then extract it.
 
 For 64-bit environment, download x64 zip archive from
 packages.groonga.org:
 
-  * http://packages.groonga.org/windows/groonga/groonga-3.1.1-x64.zip
+  * http://packages.groonga.org/windows/groonga/groonga-3.1.2-x64.zip
 
 Then extract it.
 
@@ -65,27 +66,27 @@ Windows. Here are required tools:
 
 Download zipped source from packages.groonga.org:
 
-  * http://packages.groonga.org/source/groonga/groonga-3.1.1.zip
+  * http://packages.groonga.org/source/groonga/groonga-3.1.2.zip
 
 Then extract it.
 
 Move to the Groonga's source folder::
 
-  > cd c:\Users\%USERNAME%\Downloads\groonga-3.1.1
+  > cd c:\Users\%USERNAME%\Downloads\groonga-3.1.2
 
 Configure by ``cmake``. The following commnad line is for 64-bit
 version. To build 32-bit version, use ``-G "Visual Studio 10"``
 parameter instead::
 
-  groonga-3.1.1> cmake . -G "Visual Studio 10 Win64" -DCMAKE_INSTALL_PREFIX=C:\groonga
+  groonga-3.1.2> cmake . -G "Visual Studio 10 Win64" -DCMAKE_INSTALL_PREFIX=C:\groonga
 
 Build::
 
-  groonga-3.1.1> cmake --build . --config Release
+  groonga-3.1.2> cmake --build . --config Release
 
 Install::
 
-  groonga-3.1.1> cmake --build . --config Release --target Install
+  groonga-3.1.2> cmake --build . --config Release --target Install
 
 After the above steps, :doc:`/reference/executables/groonga` is found in
 ``c:\groonga\bin\groonga.exe``.

data/vendor/local/share/doc/groonga/ja/html/_sources/limitations.txt

@@ -1,4 +1,5 @@
 .. -*- rst -*-
+.. Groonga Project
 
 .. highlightlang:: none
 

data/vendor/local/share/doc/groonga/ja/html/_sources/news.txt

@@ -5,6 +5,37 @@
 News
 ====
 
+.. _release-3-1-2:
+
+Release 3.1.2 - 2014/01/29
+--------------------------
+
+Improvements
+^^^^^^^^^^^^
+
+* [doc] Updated to caplitalized "Groonga" terms in documentation. [Patch by cosmo0920] [GitHub#136, #137, #138, #139, #140, #141, #142, #143, #144, #145, #146, #147, #148, #149, #150]
+* Supported to customize the value of lock timeout. See :doc:`/reference/api/global_configurations` about details.
+  [groonga-dev,02017] [Suggested by yoku]
+* [doc] Added description about the value of lock timeout.
+* Enabled ``GRN_JA_SKIP_SAME_VALUE_PUT`` by default. In the previous releases, the value of
+  this configuration is 'no'. This change affects reducing the size of Groonga database.
+* Supported multiple indexes including a nested index and multiple keywords query.
+  This change TODO.
+* Added API to customize normalizer for snippet.
+
+Fixes
+^^^^^
+
+* Fixed not to use index for empty query. This change enables you to search even though empty query.
+  Note that this means that there is performance penalty if many empty records exist.
+  [groonga-dev,02052] [Reported by Naoya Murakami]
+
+Thanks
+^^^^^^
+
+* yoku
+* Naoya Murakami
+
 .. _release-3-1-1:
 
 Release 3.1.1 - 2013/12/29
@@ -24,7 +55,7 @@ Improvements
 * [doc] Refined drilldown documentation. [Reported by @Yahppo]
 * Supported :doc:`/reference/functions/between` function which is used for
   filtering the column value in specific range.
-* [doc] Updated Travis CI envrinment information. [Patch by cosmo0920]
+* [doc] Updated Travis CI environment information. [Patch by cosmo0920]
 * [rpm][fedora] Dropped Fedora 19.
 * [rpm][fedora] Supported Fedora 20.
 * [doc] Updated "Groonga" notation. [Patch by cosmo0920] [GitHub#122, #123, #124, #125, #125, #126, #127, #128, #129, #130, #131, #131, #132, #133, #134]

data/vendor/local/share/doc/groonga/ja/html/_sources/reference.txt

@@ -1,4 +1,5 @@
 .. -*- rst -*-
+.. Groonga Project
 
 .. highlightlang:: none
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/api/global_configurations.txt

@@ -0,0 +1,49 @@
+.. -*- rst -*-
+
+.. highlightlang:: none
+
+Global configurations
+=====================
+
+Summary
+-------
+
+Groonga has the global configurations. You can access them by API.
+
+
+Reference
+---------
+
+.. c:function:: int grn_get_lock_timeout(void)
+
+   Returns the lock timeout.
+
+   :c:type:`grn_ctx` acquires a lock for updating a shared value. If
+   other :c:type:`grn_ctx` is already updating the same value,
+   :c:type:`grn_ctx` that try to acquire a lock can't acquires a lock.
+   The :c:type:`grn_ctx` that can't acquires a lock waits 1
+   millisecond and try to acquire a lock again. The try is done
+   ``timeout`` times. If the :c:type:`grn_ctx` that can't acquires a
+   lock until ``timeout`` times, the tries are failed.
+
+   The default lock timeout is ``10000000``. It means that Groonga
+   doesn't report a lock failure until about 3 hours.  (1 * 10000000
+   [msec] = 10000 [sec] = 166.666... [min] = 2.777... [hour])
+
+   :return: The lock timeout.
+
+.. c:function:: grn_rc grn_set_lock_timeout(int timeout)
+
+   Sets the lock timeout.
+
+   See :c:function:`grn_get_lock_timeout` about lock timeout.
+
+   There are some special values for ``timeout``.
+
+     * ``0``: It means that Groonga doesn't retry acquiring a lock.
+       Groonga reports a failure after one lock acquirement failure.
+     * negative value: It means that Groonga retries acquiring a lock
+       until Groonga can acquire a lock.
+
+   :param timeuot: The new lock timeout.
+   :return: ``GRN_SUCCESS``. It doesn't fail.

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/commands/cache_limit.txt

@@ -1,4 +1,5 @@
 .. -*- rst -*-
+.. Groonga Project
 
 .. highlightlang:: none
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/executables/grnslap.txt

@@ -22,7 +22,7 @@ grnslap - groongaプロセスの通信層のパフォーマンスをチェック
 
 grnslapは、groongaプロセスに対してリクエストを多重に行い、パフォーマンスをチェックするためのツールです。
 
-groonga独自プロトコルであるgqtpと、httpの両プロトコルでリクエストを行うことができます。また、リクエストの多重度を指定することができます。
+Groonga独自プロトコルであるGQTPと、httpの両プロトコルでリクエストを行うことができます。また、リクエストの多重度を指定することができます。
 
 クエリの内容を標準入力から与えることができます。実稼動環境でのクエリパタンに近いクエリを標準入力に与えることによって、実稼動環境に近い状態での検証を行うことができます。
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/executables/groonga.txt

@@ -20,8 +20,8 @@ groonga - 列指向データベース機能を持つ全文検索エンジンソ
 説明
 ----
 
-groongaは列指向のデータベース機能を持つ高速でスケーラブルな全文検索エンジンです。
-groongaのデータベースは、groongaコマンドかCライブラリインタフェースを通して操作することができます。このマニュアルページでは、groongaコマンドの使い方について説明します。
+Groongaは列指向のデータベース機能を持つ高速でスケーラブルな全文検索エンジンです。
+Groongaのデータベースは、groongaコマンドかCライブラリインタフェースを通して操作することができます。このマニュアルページでは、groongaコマンドの使い方について説明します。
 
 オプション
 ----------

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/edit_distance.txt

@@ -19,7 +19,7 @@ edit_distance - 指定した2つの文字列の編集距離を計算する
 説明
 ----
 
-groonga組込関数の一つであるedit_distanceについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
+Groonga組込関数の一つであるedit_distanceについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
 
 edit_distance() 関数は、string1に指定した文字列とstring2に指定した文字列の間の編集距離を求めます。
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/geo_distance.txt

@@ -30,16 +30,16 @@ distance as if ``"rectangle"`` was specified.
 Usage
 -----
 
-``geo_distance`` is one of the groonga builtin functions.
+``geo_distance`` is one of the Groonga builtin functions.
 
-You can call a builtin function in :doc:`/reference/grn_expr` 
+You can call a builtin function in :doc:`/reference/grn_expr`
 
 ``geo_distance`` function calculates the value of distance (approximate value)
 between the coordinate of ``point1`` and the coordinate of ``point2``.
 
 .. note::
 
-    groonga provides three built in functions for calculating the value of distance. 
+    Groonga provides three built in functions for calculating the value of distance.
     There are ``geo_distance()``, ``geo_distance2()`` and ``geo_distance3()``.
     The difference of them is the algorithm of calculating distance.
     ``geo_distance2()`` and ``geo_distance3()`` were deprecated since version 1.2.9.
@@ -166,7 +166,7 @@ See :doc:`/reference/types` about GeoPoint.
 It specifies the end point that
 you want to calculate the value of distance between two points.
 
-You can specify the value of GeoPoint type or 
+You can specify the value of GeoPoint type or
 the string indicating the coordinate.
 
 See :doc:`/reference/types` about GeoPoint and the coordinate.
@@ -194,7 +194,7 @@ You can specify the value of ``approximate_type`` by one of the followings.
     calculate the value of distance between two points across meridian,
     equator or the date line if you use ``sphere`` or ``ellipsoid`` as
     approximate type. There is not such a limitation for ``rectangle``.
-    This is temporary limitation according to the implementation of groonga,
+    This is temporary limitation according to the implementation of Groonga,
     but it will be fixed in the future release.
 
 ``rectangle``
@@ -298,4 +298,3 @@ The unit of return value is meter.
 .. rubric:: Footnote
 
 .. [#] You can specify whether TokyoGeoPoint or WGS84GeoPoint.
-

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/geo_in_circle.txt

@@ -19,7 +19,7 @@ geo_in_circle - 座標が円の範囲内に存在するかどうかを調べま
 説明
 ----
 
-groonga組込関数の一つであるgeo_in_circleについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
+Groonga組込関数の一つであるgeo_in_circleについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
 
 geo_in_circle() 関数は、pointに指定した座標が、centerに指定した座標を中心とする円の範囲内にあるかどうかを調べます。
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/geo_in_rectangle.txt

@@ -19,7 +19,7 @@ geo_in_rectangle - 座標が矩形の範囲内に存在するかどうかを調
 説明
 ----
 
-groonga組込関数の一つであるgeo_in_rectangleについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
+Groonga組込関数の一つであるgeo_in_rectangleについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
 
 geo_in_rectangle() 関数は、pointに指定した座標が、top_leftとbottom_rightがなす矩形の範囲内にあるかどうかを調べます。
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/html_untag.txt

@@ -27,7 +27,7 @@ Syntax
 Requirements
 ------------
 
-``html_untag`` requires groonga 3.0.5 or later.
+``html_untag`` requires Groonga 3.0.5 or later.
 
 ``html_untag`` requires :doc:`/reference/command/command_version` 2 or
 later.

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/now.txt

@@ -19,7 +19,7 @@ now - 現在時刻を返す
 説明
 ----
 
-groonga組込関数の一つであるnowについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
+Groonga組込関数の一つであるnowについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
 
 now() 関数は現在時刻に対応するTime型の値を返します。
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/rand.txt

@@ -19,7 +19,7 @@ rand - 乱数を生成する
 説明
 ----
 
-groonga組込関数の一つであるrandについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
+Groonga組込関数の一つであるrandについて説明します。組込関数は、script形式のgrn_expr中で呼び出すことができます。
 
 rand() 関数は 0 から max の間の疑似乱数整数を返します。
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/functions/snippet_html.txt

@@ -56,7 +56,7 @@ Here are a schema definition and sample data to show usage.
 
 You need to specify ``--command_version 2`` argument explicitly
 because function call in ``--output_columns`` is experimental feature
-in groonga 2.0.9. It will be enabled by default soon.
+in Groonga 2.0.9. It will be enabled by default soon.
 
 You also need to specify ``--query`` and/or ``--filter``. Keywords are
 extracted from ``--query`` and ``--filter`` arguments.
@@ -92,8 +92,10 @@ You can specify string literal instead of column.
 Return value
 ------------
 
-``snippet_html`` returns an array of string. An element of array is a
-snippet::
+``snippet_html`` returns an array of string or ``null``. If
+``snippet_html`` can't find any snippets, it returns ``null``.
+
+An element of array is a snippet::
 
   [SNIPPET1, SNIPPET2, SNIPPET3]
 

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/grn_expr.txt

@@ -43,7 +43,7 @@ grn_expr related APIs. You can use full features with calling APIs
 like :doc:`/reference/grn_expr/script_syntax`. Calling APIs is useful
 creating a custom syntax to create grn_expr. They are used in `rroonga
 <http://groonga.rubyforge.org/#about-rroonga>`_ that is Ruby bindings
-of groonga. Rroonga can create a grn_expr by Ruby's syntax instead of
+of Groonga. Rroonga can create a grn_expr by Ruby's syntax instead of
 parsing string.
 
 .. toctree::

data/vendor/local/share/doc/groonga/ja/html/_sources/reference/pseudo_column.txt

@@ -13,7 +13,7 @@
 説明
 ----
 
-groongaのデータベースで作成したテーブルには、いくつかのカラムが自動的に定義されます。
+Groongaのデータベースで作成したテーブルには、いくつかのカラムが自動的に定義されます。
 
 これらのカラムはいずれもアンダースコア('_')で始まる名前が付与されます。定義される疑似カラムは、テーブルの種類によって異なります。