rroonga 2.0.4-x86-mingw32 → 2.0.7-x86-mingw32

data/vendor/local/share/doc/groonga/ja/html/_sources/development/travis-ci.txt

@@ -0,0 +1,61 @@
+.. -*- rst -*-
+
+.. highlightlang:: none
+
+Travis CI
+=========
+
+This section describes about using groonga on `Travis CI
+<http://travis-ci.org/>`_. Travis CI is a hosted continuous
+integration service for the open source community.
+
+You can use Travis CI for your open source software. This section only
+describes about groonga related configuration. See `Travis CI:
+Documentation <http://about.travis-ci.org/docs/>`_ about general
+Travis CI.
+
+Configuration
+-------------
+
+Travis CI is running on 32-bit Ubuntu 11.10. (See `Travis CI: About
+Travis CI Environment
+<http://about.travis-ci.org/docs/user/ci-environment/>`_.)  You can
+use apt-line for Ubuntu 11.10 provided by groonga project to install
+groonga on Travis CI.
+
+You can custom build lifecycle by ``.travis.yml``. (See `Travis CI:
+Conifugration your Travis CI build with .travis.yml
+<http://about.travis-ci.org/docs/user/build-configuration/>`_.) You
+can use ``before_install`` hook or ``install`` hook. You should use
+``before_install`` if your software uses a language that is supported
+by Travis CI such as Ruby. You should use ``install`` otherwise.
+
+Add the following ``before_install`` configuration to ``.travis.yml``::
+
+  before_install:
+    - curl https://raw.github.com/groonga/groonga/master/data/travis/setup.sh | sh
+
+If you need to use ``install`` hook instead of ``before_install``, you
+just substitute ``before_install:`` with ``install:``.
+
+With the above configuration, you can use groonga for your build.
+
+Examples
+--------
+
+Here are open source softwares that use groonga on Travis CI:
+
+  * `rroonga <http://groonga.rubyforge.org/#about-rroonga>`_ (Ruby bindings)
+
+    * `rroonga on Travis CI <http://travis-ci.org/#!/ranguba/rroonga>`_
+    * `.travis.yml for rroonga <https://github.com/ranguba/rroonga/blob/master/.travis.yml>`_
+
+  * `nroonga <http://nroonga.github.com/>`_ (node.js bindings)
+
+    * `nroonga on Travis CI <http://travis-ci.org/#!/nroonga/nroonga>`_
+    * `.travis.yml for nroonga <https://github.com/nroonga/nroonga/blob/master/.travis.yml>`_
+
+  * `logaling-command <http://logaling.github.com/>`_ (A glossary management command line tool)
+
+    * `logaling-command on Travis CI <http://travis-ci.org/#!/logaling/logaling-command>`_
+    * `.travis.yml for logaling-command <https://github.com/logaling/logaling-command/blob/master/.travis.yml>`_

data/vendor/local/share/doc/groonga/ja/html/_sources/development.txt

@@ -0,0 +1,15 @@
+.. -*- rst -*-
+
+.. highlightlang:: none
+
+Development
+===========
+
+This section describes about developing with groonga. You may develop
+an application that uses groonga as its detabase, a library that uses
+libgroonga, language bindings of libgroonga and so on.
+
+.. toctree::
+   :maxdepth: 2
+
+   development/travis-ci

data/vendor/local/share/doc/groonga/ja/html/_sources/index.txt

@@ -20,10 +20,12 @@ groonga documentation
    tutorial
    suggest
    geolocation_search
+   server
    reference
    spec
    limitations
    troubleshooting
+   development
    contribution
 
 * :ref:`genindex`

data/vendor/local/share/doc/groonga/ja/html/_sources/install/centos.txt

@@ -0,0 +1,131 @@
+.. -*- rst -*-
+
+.. highlightlang:: none
+
+CentOS
+======
+
+This section describes how to install groonga related RPM packages on
+CentOS. You can install them by ``yum``.
+
+We distribute both 32-bit and 64-bit packages but we strongly
+recommend a 64-bit package for server. You should use a 32-bit package
+just only for tests or development. You will encounter an out of
+memory error with a 32-bit package even if you just process medium
+size data.
+
+CentOS 5
+--------
+
+Install::
+
+  % sudo rpm -ivh http://packages.groonga.org/centos/groonga-release-1.1.0-0.noarch.rpm
+  % sudo yum makecache
+  % sudo yum install -y groonga
+
+If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
+tokenizer, install groonga-tokenizer-mecab package.
+
+Install groonga-tokenizer-mecab package::
+
+  % sudo yum install -y groonga-tokenizer-mecab
+
+There is a package that provides `Munin
+<http://munin-monitoring.org/>`_ plugins. If you want to monitor
+groonga status by Munin, install groonga-munin-plugins package.
+
+.. note::
+
+   Groonga-munin-plugins package requires munin-node package that
+   isn't included in the official CentOS repository. You need to
+   enable `Repoforge (RPMforge) <http://repoforge.org/>`_ repository
+   or `EPEL <http://fedoraproject.org/wiki/EPEL>`_ repository to
+   install it by ``yum``.
+
+   Enable Repoforge (RPMforge) repository on i386 environment::
+
+     % wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.i386.rpm
+     % sudo rpm -ivh rpmforge-release-0.5.2-2.el5.rf.i386.rpm
+
+   Enable Repoforge (RPMforge) repository on x86_64 environment::
+
+     % wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
+     % sudo rpm -ivh rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
+
+   Enable EPEL repository on any environment::
+
+     % wget http://download.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm
+     % sudo rpm -ivh epel-release-5-4.noarch.rpm
+
+Install groonga-munin-plugins package::
+
+  % sudo yum install -y groonga-munin-plugins
+
+CentOS 6
+--------
+
+Install::
+
+  % sudo rpm -ivh http://packages.groonga.org/centos/groonga-release-1.1.0-0.noarch.rpm
+  % sudo yum makecache
+  % sudo yum install -y groonga
+
+If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
+tokenizer, install groonga-tokenizer-mecab package.
+
+Install groonga-tokenizer-mecab package::
+
+  % sudo yum install -y groonga-tokenizer-mecab
+
+There is a package that provides `Munin
+<http://munin-monitoring.org/>`_ plugins. If you want to monitor
+groonga status by Munin, install groonga-munin-plugins package.
+
+.. note::
+
+   Groonga-munin-plugins package requires munin-node package that
+   isn't included in the official CentOS repository. You need to
+   enable `EPEL <http://fedoraproject.org/wiki/EPEL>`_ repository to
+   install it by ``yum``.
+
+   ..
+      Enable Repoforge (RPMforge) repository on i686 environment::
+
+        % sudo rpm -ivh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.i686.rpm
+
+      Enable Repoforge (RPMforge) repository on x86_64 environment::
+
+        % sudo rpm -ivh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
+
+   Enable EPEL repository on any environment::
+
+     % sudo rpm -ivh http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-7.noarch.rpm
+
+Install groonga-munin-plugins package::
+
+  % sudo yum install -y groonga-munin-plugins
+
+Build from source
+-----------------
+
+Install required packages to build groonga::
+
+  % sudo yum install -y wget tar gcc-c++ make mecab-devel
+
+Download source::
+
+  % wget http://packages.groonga.org/source/groonga/groonga-2.0.7.tar.gz
+  % tar xvzf groonga-2.0.7.tar.gz
+  % cd groonga-2.0.7
+
+Configure (see :ref:`source-configure` about ``configure`` options)::
+
+  % ./configure
+
+Build::
+
+  % make -j$(grep '^processor' /proc/cpuinfo | wc -l)
+
+Install::
+
+  % sudo make intall

data/vendor/local/share/doc/groonga/ja/html/_sources/install/debian.txt

@@ -0,0 +1,136 @@
+.. -*- rst -*-
+
+.. highlightlang:: none
+
+Debian GNU/Linux
+================
+
+This section describes how to install groonga related deb packages on
+Debian GNU/Linux. You can install them by ``apt``.
+
+We distribute both 32-bit and 64-bit packages but we strongly
+recommend a 64-bit package for server. You should use a 32-bit package
+just only for tests or development. You will encounter an out of
+memory error with a 32-bit package even if you just process medium
+size data.
+
+squeeze
+-------
+
+Add the groonga apt repository.
+
+/etc/apt/sources.list.d/groonga.list::
+
+  deb http://packages.groonga.org/debian/ squeeze main
+  deb-src http://packages.groonga.org/debian/ squeeze main
+
+Install::
+
+  % sudo aptitude update
+  % sudo aptitude -V -D -y --allow-untrusted install groonga-keyring
+  % sudo aptitude update
+  % sudo aptitude -V -D -y install groonga
+
+If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
+tokenizer, install groonga-tokenizer-mecab package.
+
+Install groonga-tokenizer-mecab package::
+
+  % sudo aptitude -V -D -y install groonga-tokenizer-mecab
+
+There is a package that provides `Munin
+<http://munin-monitoring.org/>`_ plugins. If you want to monitor
+groonga status by Munin, install groonga-munin-plugins package.
+
+Install groonga-munin-plugins package::
+
+  % sudo aptitude -V -D -y install groonga-munin-plugins
+
+wheezy
+------
+
+Add the groonga apt repository.
+
+/etc/apt/sources.list.d/groonga.list::
+
+  deb http://packages.groonga.org/debian/ wheezy main
+  deb-src http://packages.groonga.org/debian/ wheezy main
+
+Install::
+
+  % sudo apt-get update
+  % sudo apt-get -y --allow-unauthenticated install groonga-keyring
+  % sudo apt-get update
+  % sudo apt-get -y install groonga
+
+If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
+tokenizer, install groonga-tokenizer-mecab package.
+
+Install groonga-tokenizer-mecab package::
+
+  % sudo aptitude -V -D -y install groonga-tokenizer-mecab
+
+There is a package that provides `Munin
+<http://munin-monitoring.org/>`_ plugins. If you want to monitor
+groonga status by Munin, install groonga-munin-plugins package.
+
+Install groonga-munin-plugins package::
+
+  % sudo aptitude -V -D -y install groonga-munin-plugins
+
+sid
+---
+
+Add the groonga apt repository.
+
+/etc/apt/sources.list.d/groonga.list::
+
+  deb http://packages.groonga.org/debian/ unstable main
+  deb-src http://packages.groonga.org/debian/ unstable main
+
+Install::
+
+  % sudo aptitude update
+  % sudo aptitude -V -D -y --allow-untrusted install groonga-keyring
+  % sudo aptitude update
+  % sudo aptitude -V -D -y install groonga
+
+If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
+tokenizer, install groonga-tokenizer-mecab package.
+
+Install groonga-tokenizer-mecab package::
+
+  % sudo aptitude -V -D -y install groonga-tokenizer-mecab
+
+There is a package that provides `Munin
+<http://munin-monitoring.org/>`_ plugins. If you want to monitor
+groonga status by Munin, install groonga-munin-plugins package.
+
+Install groonga-munin-plugins package::
+
+  % sudo aptitude -V -D -y install groonga-munin-plugins
+
+Build from source
+-----------------
+
+Install required packages to build groonga::
+
+  % sudo aptitude -V -D -y install wget tar build-essential zlib1g-dev liblzo2-dev libmsgpack-dev libzmq-dev libevent-dev libmecab-dev
+
+Download source::
+
+  % wget http://packages.groonga.org/source/groonga/groonga-2.0.7.tar.gz
+  % tar xvzf groonga-2.0.7.tar.gz
+  % cd groonga-2.0.7
+
+Configure (see :ref:`source-configure` about ``configure`` options)::
+
+  % ./configure
+
+Build::
+
+  % make -j$(grep '^processor' /proc/cpuinfo | wc -l)
+
+Install::
+
+  % sudo make intall

data/vendor/local/share/doc/groonga/ja/html/_sources/install/fedora.txt

@@ -0,0 +1,72 @@
+.. -*- rst -*-
+
+.. highlightlang:: none
+
+Fedora
+======
+
+This section describes how to install groonga related RPM packages on
+Fedora. You can install them by ``yum``.
+
+Groonga related RPM pakcages are also in the official Fedora yum
+repository. So you can use them instead of the groonga yum
+repository. The different between the groonga yum repository and the
+official Fedora yum repository is that the groonga yum repository
+provides the latest version at the release day but the official Fedora
+yum repository provides the latest version a few days later. That is,
+the different is very small. :-)
+
+We distribute both 32-bit and 64-bit packages but we strongly
+recommend a 64-bit package for server. You should use a 32-bit package
+just only for tests or development. You will encounter an out of
+memory error with a 32-bit package even if you just process medium
+size data.
+
+Fedora 17
+---------
+
+Install::
+
+  % sudo rpm -ivh http://packages.groonga.org/fedora/groonga-release-1.1.0-0.noarch.rpm
+  % sudo yum update
+  % sudo yum install -y groonga
+
+If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
+tokenizer, install groonga-tokenizer-mecab package.
+
+Install groonga-tokenizer-mecab package::
+
+  % sudo yum install -y groonga-tokenizer-mecab
+
+There is a package that provides `Munin
+<http://munin-monitoring.org/>`_ plugins. If you want to monitor
+groonga status by Munin, install groonga-munin-plugins package.
+
+Install groonga-munin-plugins package::
+
+  % sudo yum install -y groonga-munin-plugins
+
+Build from source
+-----------------
+
+Install required packages to build groonga::
+
+  % sudo yum install -y wget tar gcc-c++ make mecab-devel libedit-devel
+
+Download source::
+
+  % wget http://packages.groonga.org/source/groonga/groonga-2.0.7.tar.gz
+  % tar xvzf groonga-2.0.7.tar.gz
+  % cd groonga-2.0.7
+
+Configure (see :ref:`source-configure` about ``configure`` options)::
+
+  % ./configure
+
+Build::
+
+  % make -j$(grep '^processor' /proc/cpuinfo | wc -l)
+
+Install::
+
+  % sudo make intall

data/vendor/local/share/doc/groonga/ja/html/_sources/install/mac_os_x.txt

@@ -0,0 +1,53 @@
+.. -*- rst -*-
+
+.. highlightlang:: none
+
+Mac OS X
+========
+
+This section describes how to install groonga on Mac OS X. You can
+install groonga by `MacPorts <http://www.macports.org/>`_ or `Homebrew
+<http://mxcl.github.com/homebrew/>`_.
+
+We distribute both 32-bit and 64-bit packages but we strongly
+recommend a 64-bit package for server. You should use a 32-bit package
+just only for tests or development. You will encounter an out of
+memory error with a 32-bit package even if you just process medium
+size data.
+
+MacPorts
+--------
+
+Install::
+
+  % sudo port install groonga
+
+Homebrew
+--------
+
+Install::
+
+  % brew install groonga
+
+Build from source
+-----------------
+
+Install `Xcode <https://developer.apple.com/xcode/>`_.
+
+Download source::
+
+  % curl -O http://packages.groonga.org/source/groonga/groonga-2.0.7.tar.gz
+  % tar xvzf groonga-2.0.7.tar.gz
+  % cd groonga-2.0.7
+
+Configure (see :ref:`source-configure` about ``configure`` options)::
+
+  % ./configure
+
+Build::
+
+  % make -j$(/usr/sbin/sysctl -n hw.ncpu)
+
+Install::
+
+  % sudo make intall