ros-apartment 2.3.0 → 2.11.0

data/spec/dummy_engine/test/dummy/config/environments/development.rb

@@ -1,37 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Adds additional error checking when serving assets at runtime.
-  # Checks for improperly declared sprockets dependencies.
-  # Raises helpful error messages.
-  config.assets.raise_runtime_errors = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/spec/dummy_engine/test/dummy/config/environments/production.rb

@@ -1,78 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable Rails's static asset server (Apache or nginx will already do this).
-  config.serve_static_assets = false
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Generate digests for assets URLs.
-  config.assets.digest = true
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Set to :debug to see everything in the log.
-  config.log_level = :info
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = "http://assets.example.com"
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Disable automatic flushing of the log to improve performance.
-  # config.autoflush_log = false
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-end

data/spec/dummy_engine/test/dummy/config/environments/test.rb

@@ -1,39 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static asset server for tests with Cache-Control for performance.
-  config.serve_static_assets  = true
-  config.static_cache_control = 'public, max-age=3600'
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/spec/dummy_engine/test/dummy/config/initializers/assets.rb

@@ -1,8 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
-
-# Precompile additional assets.
-# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy_engine/test/dummy/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy_engine/test/dummy/config/initializers/cookies_serializer.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy_engine/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/spec/dummy_engine/test/dummy/config/initializers/inflections.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format. Inflections
-# are locale specific, and you may define rules for as many different
-# locales as you wish. All of these examples are active by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/spec/dummy_engine/test/dummy/config/initializers/mime_types.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf

data/spec/dummy_engine/test/dummy/config/initializers/session_store.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy_engine/test/dummy/config/initializers/wrap_parameters.rb

@@ -1,14 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
-end
-
-# To enable root element in JSON for ActiveRecord objects.
-# ActiveSupport.on_load(:active_record) do
-#  self.include_root_in_json = true
-# end

data/spec/dummy_engine/test/dummy/config/locales/en.yml

@@ -1,23 +0,0 @@
-# Files in the config/locales directory are used for internationalization
-# and are automatically loaded by Rails. If you want to use locales other
-# than English, add the necessary files in this directory.
-#
-# To use the locales, use `I18n.t`:
-#
-#     I18n.t 'hello'
-#
-# In views, this is aliased to just `t`:
-#
-#     <%= t('hello') %>
-#
-# To use a different locale, set it with `I18n.locale`:
-#
-#     I18n.locale = :es
-#
-# This would use the information in config/locales/es.yml.
-#
-# To learn more, please read the Rails Internationalization guide
-# available at http://guides.rubyonrails.org/i18n.html.
-
-en:
-  hello: "Hello world"

data/spec/dummy_engine/test/dummy/config/routes.rb

@@ -1,56 +0,0 @@
-Rails.application.routes.draw do
-  # The priority is based upon order of creation: first created -> highest priority.
-  # See how all your routes lay out with "rake routes".
-
-  # You can have the root of your site routed with "root"
-  # root 'welcome#index'
-
-  # Example of regular route:
-  #   get 'products/:id' => 'catalog#view'
-
-  # Example of named route that can be invoked with purchase_url(id: product.id)
-  #   get 'products/:id/purchase' => 'catalog#purchase', as: :purchase
-
-  # Example resource route (maps HTTP verbs to controller actions automatically):
-  #   resources :products
-
-  # Example resource route with options:
-  #   resources :products do
-  #     member do
-  #       get 'short'
-  #       post 'toggle'
-  #     end
-  #
-  #     collection do
-  #       get 'sold'
-  #     end
-  #   end
-
-  # Example resource route with sub-resources:
-  #   resources :products do
-  #     resources :comments, :sales
-  #     resource :seller
-  #   end
-
-  # Example resource route with more complex sub-resources:
-  #   resources :products do
-  #     resources :comments
-  #     resources :sales do
-  #       get 'recent', on: :collection
-  #     end
-  #   end
-
-  # Example resource route with concerns:
-  #   concern :toggleable do
-  #     post 'toggle'
-  #   end
-  #   resources :posts, concerns: :toggleable
-  #   resources :photos, concerns: :toggleable
-
-  # Example resource route within a namespace:
-  #   namespace :admin do
-  #     # Directs /admin/products/* to Admin::ProductsController
-  #     # (app/controllers/admin/products_controller.rb)
-  #     resources :products
-  #   end
-end

data/spec/dummy_engine/test/dummy/config/secrets.yml

@@ -1,22 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key is used for verifying the integrity of signed cookies.
-# If you change this key, all old signed cookies will become invalid!
-
-# Make sure the secret is at least 30 characters and all random,
-# no regular words or you'll be exposed to dictionary attacks.
-# You can use `rake secret` to generate a secure secret key.
-
-# Make sure the secrets in this file are kept private
-# if you're sharing your code publicly.
-
-development:
-  secret_key_base: bb62b819b585a74e69c797f9d03d5a004d8fe82a8e7a7da6fa2f7923030713b7b087c12cc7a918e71073c38afb343f7223d22ba3f1b223b7e76dbf8d5b65fa2c
-
-test:
-  secret_key_base: 67945d3b189c71dffef98de2bb7c14d6fb059679c115ca3cddf65c88babe130afe4d583560d0e308b017dd76ce305bef4159d876de9fd893952d9cbf269c8476
-
-# Do not keep production secrets in the repository,
-# instead read values from the environment.
-production:
-  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/spec/dummy_engine/test/dummy/config.ru

@@ -1,4 +0,0 @@
-# This file is used by Rack-based servers to start the application.
-
-require ::File.expand_path('../config/environment',  __FILE__)
-run Rails.application

data/spec/examples/connection_adapter_examples.rb

@@ -1,42 +0,0 @@
-require 'spec_helper'
-
-shared_examples_for "a connection based apartment adapter" do
-  include Apartment::Spec::AdapterRequirements
-
-  let(:default_tenant){ subject.switch{ ActiveRecord::Base.connection.current_database } }
-
-  describe "#init" do
-    after do
-      # Apartment::Tenant.init creates per model connection.
-      # Remove the connection after testing not to unintentionally keep the connection across tests.
-      Apartment.excluded_models.each do |excluded_model|
-        excluded_model.constantize.remove_connection
-      end
-    end
-
-    it "should process model exclusions" do
-      Apartment.configure do |config|
-        config.excluded_models = ["Company"]
-      end
-      Apartment::Tenant.init
-
-      expect(Company.connection.object_id).not_to eq(ActiveRecord::Base.connection.object_id)
-    end
-  end
-
-  describe "#drop" do
-    it "should raise an error for unknown database" do
-      expect {
-        subject.drop 'unknown_database'
-      }.to raise_error(Apartment::TenantNotFound)
-    end
-  end
-
-  describe "#switch!" do
-    it "should raise an error if database is invalid" do
-      expect {
-        subject.switch! 'unknown_database'
-      }.to raise_error(Apartment::TenantNotFound)
-    end
-  end
-end

data/spec/examples/generic_adapter_custom_configuration_example.rb

@@ -1,95 +0,0 @@
-require 'spec_helper'
-
-shared_examples_for "a generic apartment adapter able to handle custom configuration" do
-
-  let(:custom_tenant_name) { 'test_tenantwwww' }
-  let(:db) { |example| example.metadata[:database]}
-  let(:custom_tenant_names) do
-    {
-      custom_tenant_name => get_custom_db_conf
-    }
-  end
-
-  before do
-    Apartment.tenant_names = custom_tenant_names
-    Apartment.with_multi_server_setup = true
-  end
-
-  after do
-    Apartment.with_multi_server_setup = false
-  end
-
-  context "database key taken from specific config" do
-
-    let(:expected_args) { get_custom_db_conf }
-
-    describe "#create" do
-      it "should establish_connection with the separate connection with expected args" do
-        expect(Apartment::Adapters::AbstractAdapter::SeparateDbConnectionHandler).to receive(:establish_connection).with(expected_args).and_call_original
-
-        # because we dont have another server to connect to it errors
-        # what matters is establish_connection receives proper args
-        expect { subject.create(custom_tenant_name) }.to raise_error(Apartment::TenantExists)
-      end
-    end
-
-    describe "#drop" do
-      it "should establish_connection with the separate connection with expected args" do
-        expect(Apartment::Adapters::AbstractAdapter::SeparateDbConnectionHandler).to receive(:establish_connection).with(expected_args).and_call_original
-
-        # because we dont have another server to connect to it errors
-        # what matters is establish_connection receives proper args
-        expect { subject.drop(custom_tenant_name) }.to raise_error(Apartment::TenantNotFound)
-      end
-    end
-  end
-
-  context "database key from tenant name" do
-
-    let(:expected_args) {
-      get_custom_db_conf.tap {|args| args.delete(:database) }
-    }
-
-    describe "#switch!" do
-
-      it "should connect to new db" do
-        expect(Apartment).to receive(:establish_connection) do |args|
-          db_name = args.delete(:database)
-
-          expect(args).to eq expected_args
-          expect(db_name).to match custom_tenant_name
-
-          # we only need to check args, then we short circuit
-          # in order to avoid the mess due to the `establish_connection` override
-          raise ActiveRecord::ActiveRecordError
-        end
-
-        expect { subject.switch!(custom_tenant_name) }.to raise_error(Apartment::TenantNotFound)
-      end
-    end
-  end
-
-  def specific_connection
-    {
-      postgresql: {
-        adapter:  'postgresql',
-        database: 'override_database',
-        password: 'override_password',
-        username: 'overridepostgres'
-      },
-      mysql: {
-        adapter:  'mysql2',
-        database: 'override_database',
-        username: 'root'
-      },
-      sqlite: {
-        adapter:  'sqlite3',
-        database: 'override_database'
-      }
-    }
-  end
-
-  def get_custom_db_conf
-    specific_connection[db.to_sym].with_indifferent_access
-  end
-end

data/spec/examples/generic_adapter_examples.rb

@@ -1,163 +0,0 @@
-require 'spec_helper'
-
-shared_examples_for "a generic apartment adapter" do
-  include Apartment::Spec::AdapterRequirements
-
-  before {
-    Apartment.prepend_environment = false
-    Apartment.append_environment = false
-  }
-
-  describe "#init" do
-    it "should not retain a connection after railtie" do
-      # this test should work on rails >= 4, the connection pool code is
-      # completely different for 3.2 so we'd have to have a messy conditional..
-      unless Rails::VERSION::MAJOR < 4
-        ActiveRecord::Base.connection_pool.disconnect!
-
-        Apartment::Railtie.config.to_prepare_blocks.map(&:call)
-
-        num_available_connections = Apartment.connection_class.connection_pool
-          .instance_variable_get(:@available)
-          .instance_variable_get(:@queue)
-          .size
-
-        expect(num_available_connections).to eq(1)
-      end
-    end
-  end
-
-  #
-  #   Creates happen already in our before_filter
-  #
-  describe "#create" do
-
-    it "should create the new databases" do
-      expect(tenant_names).to include(db1)
-      expect(tenant_names).to include(db2)
-    end
-
-    it "should load schema.rb to new schema" do
-      subject.switch(db1) do
-        expect(connection.tables).to include('companies')
-      end
-    end
-
-    it "should yield to block if passed and reset" do
-      subject.drop(db2) # so we don't get errors on creation
-
-      @count = 0  # set our variable so its visible in and outside of blocks
-
-      subject.create(db2) do
-        @count = User.count
-        expect(subject.current).to eq(db2)
-        User.create
-      end
-
-      expect(subject.current).not_to eq(db2)
-
-      subject.switch(db2){ expect(User.count).to eq(@count + 1) }
-    end
-
-    it "should raise error when the schema.rb is missing unless Apartment.use_sql is set to true" do
-      next if Apartment.use_sql
-
-      subject.drop(db1)
-      begin
-        Dir.mktmpdir do |tmpdir|
-          Apartment.database_schema_file = "#{tmpdir}/schema.rb"
-          expect {
-            subject.create(db1)
-          }.to raise_error(Apartment::FileNotFound)
-        end
-      ensure
-        Apartment.remove_instance_variable(:@database_schema_file)
-      end
-    end
-  end
-
-  describe "#drop" do
-    it "should remove the db" do
-      subject.drop db1
-      expect(tenant_names).not_to include(db1)
-    end
-  end
-
-  describe "#switch!" do
-    it "should connect to new db" do
-      subject.switch!(db1)
-      expect(subject.current).to eq(db1)
-    end
-
-    it "should reset connection if database is nil" do
-      subject.switch!
-      expect(subject.current).to eq(default_tenant)
-    end
-
-    it "should raise an error if database is invalid" do
-      expect {
-        subject.switch! 'unknown_database'
-      }.to raise_error(Apartment::ApartmentError)
-    end
-  end
-
-  describe "#switch" do
-    it "connects and resets the tenant" do
-      subject.switch(db1) do
-        expect(subject.current).to eq(db1)
-      end
-      expect(subject.current).to eq(default_tenant)
-    end
-
-    # We're often finding when using Apartment in tests, the `current` (ie the previously connect to db)
-    # gets dropped, but switch will try to return to that db in a test.  We should just reset if it doesn't exist
-    it "should not throw exception if current is no longer accessible" do
-      subject.switch!(db2)
-
-      expect {
-        subject.switch(db1){ subject.drop(db2) }
-      }.to_not raise_error
-    end
-  end
-
-  describe "#reset" do
-    it "should reset connection" do
-      subject.switch!(db1)
-      subject.reset
-      expect(subject.current).to eq(default_tenant)
-    end
-  end
-
-  describe "#current" do
-    it "should return the current db name" do
-      subject.switch!(db1)
-      expect(subject.current).to eq(db1)
-    end
-  end
-
-  describe "#each" do
-    it "iterates over each tenant by default" do
-      result = []
-      Apartment.tenant_names = [db2, db1]
-
-      subject.each do |tenant|
-        result << tenant
-        expect(subject.current).to eq(tenant)
-      end
-
-      expect(result).to eq([db2, db1])
-    end
-
-    it "iterates over the given tenants" do
-      result = []
-      Apartment.tenant_names = [db2]
-
-      subject.each([db2]) do |tenant|
-        result << tenant
-        expect(subject.current).to eq(tenant)
-      end
-
-      expect(result).to eq([db2])
-    end
-  end
-end