ros-apartment 2.3.0.alpha2 → 2.6.1

data/spec/dummy/script/rails

@@ -1,6 +0,0 @@
-#!/usr/bin/env ruby
-# This command will automatically be run when you run "rails" with Rails 3 gems installed from the root of your application.
-
-APP_PATH = File.expand_path('../../config/application',  __FILE__)
-require File.expand_path('../../config/boot',  __FILE__)
-require 'rails/commands'

data/spec/dummy_engine/.gitignore

@@ -1,8 +0,0 @@
-.bundle/
-log/*.log
-pkg/
-test/dummy/db/*.sqlite3
-test/dummy/db/*.sqlite3-journal
-test/dummy/log/*.log
-test/dummy/tmp/
-test/dummy/.sass-cache

data/spec/dummy_engine/Gemfile

@@ -1,15 +0,0 @@
-source "https://rubygems.org"
-
-# Declare your gem's dependencies in dummy_engine.gemspec.
-# Bundler will treat runtime dependencies like base dependencies, and
-# development dependencies will be added by default to the :development group.
-gemspec
-
-# Declare any dependencies that are still in development here instead of in
-# your gemspec. These might include edge Rails or gems from your path or
-# Git. Remember to move these dependencies to your gemspec before releasing
-# your gem to rubygems.org.
-
-# To use debugger
-# gem 'debugger'
-gem 'apartment', path: '../../'

data/spec/dummy_engine/Rakefile

@@ -1,34 +0,0 @@
-begin
-  require 'bundler/setup'
-rescue LoadError
-  puts 'You must `gem install bundler` and `bundle install` to run rake tasks'
-end
-
-require 'rdoc/task'
-
-RDoc::Task.new(:rdoc) do |rdoc|
-  rdoc.rdoc_dir = 'rdoc'
-  rdoc.title    = 'DummyEngine'
-  rdoc.options << '--line-numbers'
-  rdoc.rdoc_files.include('README.rdoc')
-  rdoc.rdoc_files.include('lib/**/*.rb')
-end
-
-APP_RAKEFILE = File.expand_path("../test/dummy/Rakefile", __FILE__)
-load 'rails/tasks/engine.rake'
-
-
-
-Bundler::GemHelper.install_tasks
-
-require 'rake/testtask'
-
-Rake::TestTask.new(:test) do |t|
-  t.libs << 'lib'
-  t.libs << 'test'
-  t.pattern = 'test/**/*_test.rb'
-  t.verbose = false
-end
-
-
-task default: :test

data/spec/dummy_engine/bin/rails

@@ -1,12 +0,0 @@
-#!/usr/bin/env ruby
-# This command will automatically be run when you run "rails" with Rails 4 gems installed from the root of your application.
-
-ENGINE_ROOT = File.expand_path('../..', __FILE__)
-ENGINE_PATH = File.expand_path('../../lib/dummy_engine/engine', __FILE__)
-
-# Set up gems listed in the Gemfile.
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
-require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
-
-require 'rails/all'
-require 'rails/engine/commands'

data/spec/dummy_engine/config/initializers/apartment.rb

@@ -1,51 +0,0 @@
-# Require whichever elevator you're using below here...
-#
-# require 'apartment/elevators/generic'
-# require 'apartment/elevators/domain'
-require 'apartment/elevators/subdomain'
-
-#
-# Apartment Configuration
-#
-Apartment.configure do |config|
-
-  # These models will not be multi-tenanted,
-  # but remain in the global (public) namespace
-  #
-  # An example might be a Customer or Tenant model that stores each tenant information
-  # ex:
-  #
-  # config.excluded_models = %w{Tenant}
-  #
-  config.excluded_models = %w{}
-
-  # use postgres schemas?
-  config.use_schemas = true
-
-  # use raw SQL dumps for creating postgres schemas? (only appies with use_schemas set to true)
-  #config.use_sql = true
-
-  # configure persistent schemas (E.g. hstore )
-  # config.persistent_schemas = %w{ hstore }
-
-  # add the Rails environment to database names?
-  # config.prepend_environment = true
-  # config.append_environment = true
-
-  # supply list of database names for migrations to run on
-  # config.tenant_names = lambda{ ToDo_Tenant_Or_User_Model.pluck :database }
-
-  # Specify a connection other than ActiveRecord::Base for apartment to use (only needed if your models are using a different connection)
-  # config.connection_class = ActiveRecord::Base
-end
-
-##
-# Elevator Configuration
-
-# Rails.application.config.middleware.use Apartment::Elevators::Generic, lambda { |request|
-#   # TODO: supply generic implementation
-# }
-
-# Rails.application.config.middleware.use Apartment::Elevators::Domain
-
-Rails.application.config.middleware.use Apartment::Elevators::Subdomain

data/spec/dummy_engine/dummy_engine.gemspec

@@ -1,24 +0,0 @@
-$:.push File.expand_path("../lib", __FILE__)
-
-# Maintain your gem's version:
-require "dummy_engine/version"
-
-# Describe your gem and declare its dependencies:
-Gem::Specification.new do |s|
-  s.name        = "dummy_engine"
-  s.version     = DummyEngine::VERSION
-  s.authors     = ["Your name"]
-  s.email       = ["Your email"]
-  s.homepage    = ""
-  s.summary     = "Summary of DummyEngine."
-  s.description = "Description of DummyEngine."
-  s.license     = "MIT"
-
-  s.files = Dir["{app,config,db,lib}/**/*", "MIT-LICENSE", "Rakefile", "README.rdoc"]
-  s.test_files = Dir["test/**/*"]
-
-  s.add_dependency "rails", "~> 4.1.6"
-  s.add_dependency "apartment"
-
-  s.add_development_dependency "sqlite3"
-end

data/spec/dummy_engine/lib/dummy_engine.rb

@@ -1,4 +0,0 @@
-require "dummy_engine/engine"
-
-module DummyEngine
-end

data/spec/dummy_engine/lib/dummy_engine/engine.rb

@@ -1,4 +0,0 @@
-module DummyEngine
-  class Engine < ::Rails::Engine
-  end
-end

data/spec/dummy_engine/lib/dummy_engine/version.rb

@@ -1,3 +0,0 @@
-module DummyEngine
-  VERSION = "0.0.1"
-end

data/spec/dummy_engine/test/dummy/Rakefile

@@ -1,6 +0,0 @@
-# Add your own tasks in files placed in lib/tasks ending in .rake,
-# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
-
-require File.expand_path('../config/application', __FILE__)
-
-Rails.application.load_tasks

data/spec/dummy_engine/test/dummy/config.ru

@@ -1,4 +0,0 @@
-# This file is used by Rack-based servers to start the application.
-
-require ::File.expand_path('../config/environment',  __FILE__)
-run Rails.application

data/spec/dummy_engine/test/dummy/config/application.rb

@@ -1,22 +0,0 @@
-require File.expand_path('../boot', __FILE__)
-
-require 'rails/all'
-
-Bundler.require(*Rails.groups)
-require "dummy_engine"
-
-module Dummy
-  class Application < Rails::Application
-    # Settings in config/environments/* take precedence over those specified here.
-    # Application configuration should go into files in config/initializers
-    # -- all .rb files in that directory are automatically loaded.
-
-    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
-    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
-    # config.time_zone = 'Central Time (US & Canada)'
-
-    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
-    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
-    # config.i18n.default_locale = :de
-  end
-end

data/spec/dummy_engine/test/dummy/config/boot.rb

@@ -1,5 +0,0 @@
-# Set up gems listed in the Gemfile.
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
-
-require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
-$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/spec/dummy_engine/test/dummy/config/database.yml

@@ -1,25 +0,0 @@
-# SQLite version 3.x
-#   gem install sqlite3
-#
-#   Ensure the SQLite 3 gem is defined in your Gemfile
-#   gem 'sqlite3'
-#
-default: &default
-  adapter: sqlite3
-  pool: 5
-  timeout: 5000
-
-development:
-  <<: *default
-  database: db/development.sqlite3
-
-# Warning: The database defined as "test" will be erased and
-# re-generated from your development database when you run "rake".
-# Do not set this db to the same as development or production.
-test:
-  <<: *default
-  database: db/test.sqlite3
-
-production:
-  <<: *default
-  database: db/production.sqlite3

data/spec/dummy_engine/test/dummy/config/environment.rb

@@ -1,5 +0,0 @@
-# Load the Rails application.
-require File.expand_path('../application', __FILE__)
-
-# Initialize the Rails application.
-Rails.application.initialize!

data/spec/dummy_engine/test/dummy/config/environments/development.rb

@@ -1,37 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Adds additional error checking when serving assets at runtime.
-  # Checks for improperly declared sprockets dependencies.
-  # Raises helpful error messages.
-  config.assets.raise_runtime_errors = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/spec/dummy_engine/test/dummy/config/environments/production.rb

@@ -1,78 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable Rails's static asset server (Apache or nginx will already do this).
-  config.serve_static_assets = false
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Generate digests for assets URLs.
-  config.assets.digest = true
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Set to :debug to see everything in the log.
-  config.log_level = :info
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = "http://assets.example.com"
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Disable automatic flushing of the log to improve performance.
-  # config.autoflush_log = false
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-end

data/spec/dummy_engine/test/dummy/config/environments/test.rb

@@ -1,39 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static asset server for tests with Cache-Control for performance.
-  config.serve_static_assets  = true
-  config.static_cache_control = 'public, max-age=3600'
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/spec/dummy_engine/test/dummy/config/initializers/assets.rb

@@ -1,8 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
-
-# Precompile additional assets.
-# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy_engine/test/dummy/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy_engine/test/dummy/config/initializers/cookies_serializer.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy_engine/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]