rmm-chef 0.10.0.rc.0

data/lib/chef/provider/package/solaris.rb

@@ -0,0 +1,127 @@
+#
+# Author:: Toomas Pelberg (<toomasp@gmx.net>)
+# Copyright:: Copyright (c) 2010 Opscode, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+require 'chef/provider/package'
+require 'chef/mixin/command'
+require 'chef/resource/package'
+
+class Chef
+  class Provider
+    class Package
+      class Solaris < Chef::Provider::Package
+
+        # def initialize(*args)
+        #   super
+        #   @current_resource = Chef::Resource::Package.new(@new_resource.name)
+        # end
+
+        def load_current_resource
+          @current_resource = Chef::Resource::Package.new(@new_resource.name)
+          @current_resource.package_name(@new_resource.package_name)
+          @new_resource.version(nil)
+
+          if @new_resource.source
+            unless ::File.exists?(@new_resource.source)
+              raise Chef::Exceptions::Package, "Package #{@new_resource.name} not found: #{@new_resource.source}"
+            end
+
+            Chef::Log.debug("#{@new_resource} checking pkg status")
+            status = popen4("pkginfo -l -d #{@new_resource.source} #{@new_resource.package_name}") do |pid, stdin, stdout, stderr|
+              stdout.each do |line|
+                case line
+                when /VERSION:\s+(.+)/
+                  @new_resource.version($1)
+                end
+              end
+            end
+          elsif Array(@new_resource.action).include?(:install)
+            raise Chef::Exceptions::Package, "Source for package #{@new_resource.name} required for action install"
+          end
+
+          Chef::Log.debug("#{@new_resource} checking install state")
+          status = popen4("pkginfo -l #{@current_resource.package_name}") do |pid, stdin, stdout, stderr|
+            stdout.each do |line|
+              case line
+              when /VERSION:\s+(.+)/
+                Chef::Log.debug("#{@new_resource} version #{$1} is already installed")
+                @current_resource.version($1)
+              end
+            end
+          end
+
+          unless status.exitstatus == 0 || status.exitstatus == 1
+            raise Chef::Exceptions::Package, "pkginfo failed - #{status.inspect}!"
+          end
+
+          unless @current_resource.version.nil?
+            @current_resource.version(nil)
+          end
+
+          @current_resource
+        end
+
+        def candidate_version
+          return @candidate_version if @candidate_version
+          status = popen4("pkginfo -l -d #{@new_resource.source} #{new_resource.package_name}") do |pid, stdin, stdout, stderr|
+            stdout.each_line do |line|
+              case line
+              when /VERSION:\s+(.+)/
+                @candidate_version = $1
+                @new_resource.version($1)
+                Chef::Log.debug("#{@new_resource} setting install candidate version to #{@candidate_version}")
+              end
+            end
+          end
+          unless status.exitstatus == 0
+            raise Chef::Exceptions::Package, "pkginfo -l -d #{@new_resource.source} - #{status.inspect}!"
+          end
+          @candidate_version
+        end
+
+        def install_package(name, version)
+          Chef::Log.debug("#{@new_resource} package install options: #{@new_resource.options}")
+          if @new_resource.options.nil?
+            run_command_with_systems_locale(
+                    :command => "pkgadd -n -d #{@new_resource.source} all"
+                  )
+            Chef::Log.debug("#{@new_resource} installed version #{@new_resource.version} from: #{@new_resource.source}")
+          else
+            run_command_with_systems_locale(
+              :command => "pkgadd -n#{expand_options(@new_resource.options)} -d #{@new_resource.source} all"
+            )
+            Chef::Log.debug("#{@new_resource} installed version #{@new_resource.version} from: #{@new_resource.source}")
+          end
+        end
+
+        def remove_package(name, version)
+          if @new_resource.options.nil?
+            run_command_with_systems_locale(
+                    :command => "pkgrm -n #{name}"
+                  )
+            Chef::Log.debug("#{@new_resource} removed version #{@new_resource.version}")
+          else
+            run_command_with_systems_locale(
+              :command => "pkgrm -n#{expand_options(@new_resource.options)} #{name}"
+            )
+            Chef::Log.debug("#{@new_resource} removed version #{@new_resource.version}")
+          end
+        end
+
+      end
+    end
+  end
+end

data/lib/chef/provider/package/yum-dump.py

@@ -0,0 +1,128 @@
+#
+# Author:: Matthew Kent (<mkent@magoazul.com>)
+# Copyright:: Copyright (c) 2009 Matthew Kent
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#     http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# yum-dump.py
+# Inspired by yumhelper.py by David Lutterkort
+#
+# Produce a list of installed and available packages using yum and dump the 
+# result to stdout.
+#
+# This invokes yum just as the command line would which makes it subject to 
+# all the caching related configuration paramaters in yum.conf.
+#
+# Can be run as non root, but that won't update the cache.
+
+import os
+import sys
+import time
+import yum
+
+from yum import Errors
+
+PIDFILE='/var/run/yum.pid'
+
+# Seconds to wait for exclusive access to yum
+lock_timeout = 10
+
+failure = False 
+
+# Can't do try: except: finally: in python 2.4 it seems, hence this fun.
+try:
+  try:
+    y = yum.YumBase()
+    try:
+        # Only want our output
+        y.doConfigSetup(errorlevel=0,debuglevel=0)
+    except:
+        # but of course, yum on even moderately old
+        # redhat/centosen doesn't know how to do logging properly
+        # so we duck punch our way to victory
+        def __log(a,b): pass
+        y.doConfigSetup()
+        y.log = __log
+        y.errorlog = __log
+    
+    # Yum assumes it can update the cache directory. Disable this for non root 
+    # users.
+    y.conf.cache = os.geteuid() != 0
+
+    # Override any setting in yum.conf - we only care about the newest
+    y.conf.showdupesfromrepos = False
+
+    # Spin up to lock_timeout.
+    countdown = lock_timeout
+    while True:
+      try:
+        y.doLock(PIDFILE)
+      except Errors.LockError, e:
+        time.sleep(1)
+        countdown -= 1 
+        if countdown == 0:
+           print >> sys.stderr, "Error! Couldn't obtain an exclusive yum lock in %d seconds. Giving up." % lock_timeout
+           failure = True
+           sys.exit(1)
+      else:
+        break
+    
+    y.doTsSetup()
+    y.doRpmDBSetup()
+    
+    try:
+        db = y.doPackageLists('all')
+    except AttributeError:
+        # some people claim that testing for yum.__version__ should be
+        # enough to see if this is required, but I say they're liars.
+        # the yum on 4.8 at least understands yum.__version__ but still
+        # needs to get its repos and sacks set up manually.
+        # Thus, we just try it, fail, and then try again. WCPGW?
+        y.doRepoSetup()
+        y.doSackSetup()
+        db = y.doPackageLists('all')
+    
+    y.closeRpmDB()
+  
+  except Errors.YumBaseError, e:
+    print >> sys.stderr, "Error! %s" % e 
+    failure = True
+    sys.exit(1)
+
+# Ensure we clear the lock.
+finally:
+  try:
+    y.doUnlock(PIDFILE)
+  # Keep Unlock from raising a second exception as it does with a yum.conf 
+  # config error.
+  except Errors.YumBaseError:
+    if failure == False: 
+      print >> sys.stderr, "Error! %s" % e 
+    sys.exit(1)
+  
+for pkg in db.installed:
+     print '%s,installed,%s,%s,%s,%s' % ( pkg.name, 
+                                          pkg.epoch,
+                                          pkg.version,
+                                          pkg.release,
+                                          pkg.arch )
+for pkg in db.available:
+     print '%s,available,%s,%s,%s,%s' % ( pkg.name, 
+                                          pkg.epoch,
+                                          pkg.version,
+                                          pkg.release,
+                                          pkg.arch )
+
+sys.exit(0)

data/lib/chef/provider/package/yum.rb

@@ -0,0 +1,261 @@
+#
+# Author:: Adam Jacob (<adam@opscode.com>)
+# Copyright:: Copyright (c) 2008 Opscode, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#     http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/provider/package'
+require 'chef/mixin/command'
+require 'chef/resource/package'
+require 'singleton'
+
+class Chef
+  class Provider
+    class Package
+      class Yum < Chef::Provider::Package
+
+        class YumCache
+          include Chef::Mixin::Command
+          include Singleton
+
+          def initialize
+            load_data
+          end
+
+          def stale?
+            interval = Chef::Config[:interval].to_f
+
+            # run once mode
+            if interval == 0
+              return false
+            elsif (Time.now - @updated_at) > interval
+              return true
+            end
+
+            false
+          end
+            
+          def refresh
+            if @data.empty?
+              reload
+            elsif stale?
+               reload
+            end
+          end
+
+          def load_data
+            @data = Hash.new
+            error = String.new
+
+            helper = ::File.join(::File.dirname(__FILE__), 'yum-dump.py')
+            status = popen4("python #{helper}", :waitlast => true) do |pid, stdin, stdout, stderr|
+              stdout.each do |line|
+                line.chomp!
+                name, type, epoch, version, release, arch = line.split(',')
+                type_sym = type.to_sym
+                if !@data.has_key?(name)
+                  @data[name] = Hash.new
+                end
+                if !@data[name].has_key?(type_sym)
+                  @data[name][type_sym] = Hash.new
+                end
+                @data[name][type_sym][arch] = { :epoch => epoch, :version => version,
+                                                :release => release }
+              end
+              
+              error = stderr.readlines
+            end
+
+            unless status.exitstatus == 0
+              raise Chef::Exceptions::Package, "yum failed - #{status.inspect} - returns: #{error}"
+            end
+
+            @updated_at = Time.now
+          end
+          alias :reload :load_data
+
+          def version(package_name, type, arch)
+            if (x = @data[package_name])
+              if (y = x[type])
+                if arch
+                  if (z = y[arch])
+                    return "#{z[:version]}-#{z[:release]}"
+                  end
+                else
+                  # no arch specified - take the first match
+                  z = y.to_a[0][1]
+                  return "#{z[:version]}-#{z[:release]}"
+                end
+              end
+            end
+
+            nil
+          end
+
+          def version_available?(package_name, desired_version, arch)
+            if (package_data = @data[package_name])
+              if (available_versions = package_data[:available])
+                if arch
+                  # arch gets passed like ".x86_64"
+                  matching_versions = [ available_versions[arch.sub(/^./, '')]]
+                else
+                  matching_versions = available_versions.values
+                end
+
+                if matching_versions.nil?
+                  if arch.empty?
+                    arch_msg = ""
+                  else
+                    arch_msg = "with arch #{arch.sub(/^./, '')} "
+                  end
+
+                  raise ArgumentError, "#{package_name}: Found no available versions #{arch_msg}to match"
+                end
+
+                # Expect [ { :version => "ver", :release => "rel" }, { :version => "ver", :release => "rel" }, { :version => "ver", :release => "rel" } ] ???
+                matching_versions.each do |ver|
+                  Chef::Log.debug("#{@new_resource} trying to match #{desired_version} to version #{ver[:version]} and release #{ver[:release]}")
+                  if (desired_version == "#{ver[:version]}-#{ver[:release]}")
+                    return true
+                  end
+                end
+              end
+            end
+
+            nil
+          end
+
+          def installed_version(package_name, arch)
+            version(package_name, :installed, arch)
+          end
+
+          def candidate_version(package_name, arch)
+            version(package_name, :available, arch)
+          end
+
+          def flush
+            @data.clear
+          end
+        end
+
+        def initialize(new_resource, run_context)
+          super
+          @yum = YumCache.instance
+        end
+
+        def arch
+          if @new_resource.respond_to?("arch")
+            @new_resource.arch 
+          else
+            nil
+          end
+        end
+
+        def yum_arch
+          arch ? ".#{arch}" : nil
+        end
+
+        def load_current_resource
+          @current_resource = Chef::Resource::Package.new(@new_resource.name)
+          @current_resource.package_name(@new_resource.package_name)
+
+          if @new_resource.source
+            unless ::File.exists?(@new_resource.source)
+              raise Chef::Exceptions::Package, "Package #{@new_resource.name} not found: #{@new_resource.source}"
+            end
+
+            Chef::Log.debug("#{@new_resource} checking rpm status")
+            status = popen4("rpm -qp --queryformat '%{NAME} %{VERSION}-%{RELEASE}\n' #{@new_resource.source}") do |pid, stdin, stdout, stderr|
+              stdout.each do |line|
+                case line
+                when /([\w\d_.-]+)\s([\w\d_.-]+)/
+                  @current_resource.package_name($1)
+                  @new_resource.version($2)
+                end
+              end
+            end
+          end
+
+          Chef::Log.debug("#{@new_resource} checking yum info for #{@new_resource.package_name}#{yum_arch}")
+
+          @yum.refresh
+
+          installed_version = @yum.installed_version(@new_resource.package_name, arch)
+          @candidate_version = @yum.candidate_version(@new_resource.package_name, arch)
+
+          @current_resource.version(installed_version)
+          if candidate_version
+            @candidate_version = candidate_version
+          else
+            @candidate_version = installed_version
+          end
+          Chef::Log.debug("#{@new_resource} installed version: #{installed_version} candidate version: #{candidate_version}")
+
+          @current_resource
+        end
+
+        def install_package(name, version)
+          if @new_resource.source 
+            run_command_with_systems_locale(
+              :command => "yum -d0 -e0 -y #{@new_resource.options} localinstall #{@new_resource.source}"
+            )
+          else
+            # Work around yum not exiting with an error if a package doesn't exist for CHEF-2062
+            if @yum.version_available?(name, version, yum_arch)
+              run_command_with_systems_locale(
+                :command => "yum -d0 -e0 -y #{@new_resource.options} install #{name}-#{version}#{yum_arch}"
+              )
+            else
+              raise ArgumentError, "#{@new_resource.name}: Version #{version} of #{name} not found. Did you specify both version and release? (version-release, e.g. 1.84-10.fc6)"
+            end
+          end
+          @yum.flush
+        end
+
+        def upgrade_package(name, version)
+          # If we're not given a version, running update is the correct
+          # option. If we are, then running install_package is right.
+          unless version
+            run_command_with_systems_locale(
+              :command => "yum -d0 -e0 -y #{@new_resource.options} update #{name}#{yum_arch}"
+            )   
+            @yum.flush
+          else
+            install_package(name, version)
+          end
+        end
+
+        def remove_package(name, version)
+          if version
+            run_command_with_systems_locale(
+             :command => "yum -d0 -e0 -y #{@new_resource.options} remove #{name}-#{version}#{yum_arch}"
+            )
+          else
+            run_command_with_systems_locale(
+             :command => "yum -d0 -e0 -y #{@new_resource.options} remove #{name}#{yum_arch}"
+            )
+          end
+            
+          @yum.flush
+        end
+
+        def purge_package(name, version)
+          remove_package(name, version)
+        end
+
+      end
+    end
+  end
+end