rmails 0.1.1

data/config/initializers/devise.rb

@@ -0,0 +1,240 @@
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
+  config.mailer_sender = "post@rmails.com"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:token]` will
+  # enable it only for token authentication.
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. "Application" by default.
+  # config.http_authentication_realm = "Application"
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # :http_auth and :token_auth by adding those symbols to the array below.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing :skip => :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments.
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = "7ae529cdf6b001e9ca0d2c9277f440dffac164f8505faeb0de7bea5afbba1960cc9b13f7288604acb313f3e2b3d84d5e7d9348d2c9a59d55e8702f5645bd6e10"
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming his account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming his account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming his account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed new email is stored in
+  # unconfirmed email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # :secure => true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 8..128.
+  config.password_length = 8..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # an one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  # config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # If true, expires auth token on session timeout.
+  # config.expire_auth_token_on_timeout = false
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper)
+  # config.encryptor = :sha512
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ["*/*", :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: "/my_engine"
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using omniauth, Devise cannot automatically set Omniauth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = "/my_engine/users/auth"
+end

data/config/initializers/devise_encryptable.rb

@@ -0,0 +1,37 @@
+require "digest/sha2"
+require "base64"
+
+module Devise
+
+  # Declare encryptors length which are used in migrations.
+  ENCRYPTORS_LENGTH = {
+    :dovecot_ssha512 => 72
+  }
+
+  # Used to define the password encryption algorithm.
+  mattr_accessor :encryptor
+  @@encryptor = nil
+
+  module Encryptable
+    module Encryptors
+      class DovecotSsha512
+        # Generates a default password digest based on salt, pepper and the
+        # incoming password.
+        def self.digest(password, stretches, salt, pepper)
+          digest = password #[password, salt].flatten.join('')
+          stretches.times { digest = Digest::SHA512.digest(digest) }
+          '{SHA512}'+ Base64.encode64(digest).chomp # + salt)
+        end
+        def self.compare(encrypted_password, password, stretches, salt, pepper)
+          Devise.secure_compare(encrypted_password, digest(password, stretches, salt, pepper))
+        end
+        def self.salt(stretches)
+          Devise.friendly_token[0,20]
+        end
+      end
+    end
+  end
+end
+
+#Devise.add_module(:encryptable, :model => './model')
+Devise.add_module( :encryptable)

data/config/initializers/devise_models.rb

@@ -0,0 +1,86 @@
+require 'devise/strategies/database_authenticatable'
+
+module Devise
+  module Models
+    # Encryptable module adds support to several encryptors wrapping
+    # them in a salt and pepper mechanism to increase security.
+    #
+    # == Options
+    #
+    # Encryptable adds the following options to devise_for:
+    #
+    #   * +pepper+: a random string used to provide a more secure hash.
+    #
+    #   * +encryptor+: the encryptor going to be used. By default is nil.
+    #
+    # == Examples
+    #
+    #    User.find(1).valid_password?('password123') # returns true/false
+    #
+    module Encryptable
+      extend ActiveSupport::Concern
+
+      included do
+        attr_reader :password, :current_password
+        attr_accessor :password_confirmation
+      end
+
+      def self.required_fields(klass)
+        [:password_salt]
+      end
+
+      # Generates password salt when setting the password.
+      def password=(new_password)
+        self.password_salt = self.class.password_salt if new_password.present?
+        super
+      end
+
+      # Validates the password considering the salt.
+      def valid_password?(password)
+        return false if encrypted_password.blank?
+        encryptor_class.compare(encrypted_password, password, self.class.stretches, authenticatable_salt, self.class.pepper)
+      end
+
+      # Overrides authenticatable salt to use the new password_salt
+      # column. authenticatable_salt is used by `valid_password?`
+      # and by other modules whenever there is a need for a random
+      # token based on the user password.
+      def authenticatable_salt
+        self.password_salt
+      end
+
+    protected
+
+      # Digests the password using the configured encryptor.
+      def password_digest(password)
+        if password_salt.present?
+          encryptor_class.digest(password, self.class.stretches, authenticatable_salt, self.class.pepper)
+        end
+      end
+
+      def encryptor_class
+        self.class.encryptor_class
+      end
+
+      module ClassMethods
+        Devise::Models.config(self, :encryptor)
+
+        # Returns the class for the configured encryptor.
+        def encryptor_class
+          @encryptor_class ||= case encryptor
+            when :bcrypt
+              raise "In order to use bcrypt as encryptor, simply remove :encryptable from your devise model"
+            when nil
+              raise "You need to give an :encryptor as option in order to use :encryptable"
+            else
+              Devise::Encryptable::Encryptors.const_get(encryptor.to_s.classify)
+          end
+        end
+
+        def password_salt
+          self.encryptor_class.salt(self.stretches)
+        end
+      end
+    end
+  end
+end

data/config/initializers/inflections.rb

@@ -0,0 +1,15 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format
+# (all these examples are active by default):
+# ActiveSupport::Inflector.inflections do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+#
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/config/initializers/mime_types.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf
+# Mime::Type.register_alias "text/html", :iphone

data/config/initializers/secret_token.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+Rmails::Application.config.secret_token = '0a966ee22e34a89033bc4cd387414ed46fe50e5dd059e487a9ef17d9323ae6c798a6b1949ba4acb5df8425cb1cdef5cac7738f92e521416ffaee111983e9982e'

data/config/initializers/session_store.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+Rmails::Application.config.session_store :cookie_store, :key => '_rmails_session'
+
+# Use the database for sessions instead of the cookie-based default,
+# which shouldn't be used to store highly confidential information
+# (create the session table with "rails generate session_migration")
+# Rmails::Application.config.session_store :active_record_store

data/config/initializers/simple_form.rb

@@ -0,0 +1,142 @@
+# Use this setup block to configure all options available in SimpleForm.
+SimpleForm.setup do |config|
+  # Wrappers are used by the form builder to generate a
+  # complete input. You can remove any component from the
+  # wrapper, change the order or even add your own to the
+  # stack. The options given below are used to wrap the
+  # whole input.
+  config.wrappers :default, :class => :input,
+    :hint_class => :field_with_hint, :error_class => :field_with_errors do |b|
+    ## Extensions enabled by default
+    # Any of these extensions can be disabled for a
+    # given input by passing: `f.input EXTENSION_NAME => false`.
+    # You can make any of these extensions optional by
+    # renaming `b.use` to `b.optional`.
+
+    # Determines whether to use HTML5 (:email, :url, ...)
+    # and required attributes
+    b.use :html5
+
+    # Calculates placeholders automatically from I18n
+    # You can also pass a string as f.input :placeholder => "Placeholder"
+    b.use :placeholder
+
+    ## Optional extensions
+    # They are disabled unless you pass `f.input EXTENSION_NAME => :lookup`
+    # to the input. If so, they will retrieve the values from the model
+    # if any exists. If you want to enable the lookup for any of those
+    # extensions by default, you can change `b.optional` to `b.use`.
+
+    # Calculates maxlength from length validations for string inputs
+    b.optional :maxlength
+
+    # Calculates pattern from format validations for string inputs
+    b.optional :pattern
+
+    # Calculates min and max from length validations for numeric inputs
+    b.optional :min_max
+
+    # Calculates readonly automatically from readonly attributes
+    b.optional :readonly
+
+    ## Inputs
+    b.use :label_input
+    b.use :hint,  :wrap_with => { :tag => :span, :class => :hint }
+    b.use :error, :wrap_with => { :tag => :span, :class => :error }
+  end
+
+  # The default wrapper to be used by the FormBuilder.
+  config.default_wrapper = :default
+
+  # Define the way to render check boxes / radio buttons with labels.
+  # Defaults to :nested for bootstrap config.
+  #   :inline => input + label
+  #   :nested => label > input
+  config.boolean_style = :nested
+
+  # Default class for buttons
+  config.button_class = 'btn'
+
+  # Method used to tidy up errors. Specify any Rails Array method.
+  # :first lists the first message for each field.
+  # Use :to_sentence to list all errors for each field.
+  # config.error_method = :first
+
+  # Default tag used for error notification helper.
+  config.error_notification_tag = :div
+
+  # CSS class to add for error notification helper.
+  config.error_notification_class = 'alert alert-error'
+
+  # ID to add for error notification helper.
+  # config.error_notification_id = nil
+
+  # Series of attempts to detect a default label method for collection.
+  # config.collection_label_methods = [ :to_label, :name, :title, :to_s ]
+
+  # Series of attempts to detect a default value method for collection.
+  # config.collection_value_methods = [ :id, :to_s ]
+
+  # You can wrap a collection of radio/check boxes in a pre-defined tag, defaulting to none.
+  # config.collection_wrapper_tag = nil
+
+  # You can define the class to use on all collection wrappers. Defaulting to none.
+  # config.collection_wrapper_class = nil
+
+  # You can wrap each item in a collection of radio/check boxes with a tag,
+  # defaulting to :span. Please note that when using :boolean_style = :nested,
+  # SimpleForm will force this option to be a label.
+  # config.item_wrapper_tag = :span
+
+  # You can define a class to use in all item wrappers. Defaulting to none.
+  # config.item_wrapper_class = nil
+
+  # How the label text should be generated altogether with the required text.
+  # config.label_text = lambda { |label, required| "#{required} #{label}" }
+
+  # You can define the class to use on all labels. Default is nil.
+  config.label_class = 'control-label'
+
+  # You can define the class to use on all forms. Default is simple_form.
+  # config.form_class = :simple_form
+
+  # You can define which elements should obtain additional classes
+  # config.generate_additional_classes_for = [:wrapper, :label, :input]
+
+  # Whether attributes are required by default (or not). Default is true.
+  # config.required_by_default = true
+
+  # Tell browsers whether to use default HTML5 validations (novalidate option).
+  # Default is enabled.
+  config.browser_validations = false
+
+  # Collection of methods to detect if a file type was given.
+  # config.file_methods = [ :mounted_as, :file?, :public_filename ]
+
+  # Custom mappings for input types. This should be a hash containing a regexp
+  # to match as key, and the input type that will be used when the field name
+  # matches the regexp as value.
+  # config.input_mappings = { /count/ => :integer }
+
+  # Custom wrappers for input types. This should be a hash containing an input
+  # type as key and the wrapper that will be used for all inputs with specified type.
+  # config.wrapper_mappings = { :string => :prepend }
+
+  # Default priority for time_zone inputs.
+  # config.time_zone_priority = nil
+
+  # Default priority for country inputs.
+  # config.country_priority = nil
+
+  # Default size for text inputs.
+  # config.default_input_size = 50
+
+  # When false, do not use translations for labels.
+  # config.translate_labels = true
+
+  # Automatically discover new inputs in Rails' autoload path.
+  # config.inputs_discovery = true
+
+  # Cache SimpleForm inputs discovery
+  # config.cache_discovery = !Rails.env.development?
+end