rj_schema 0.2.3 → 0.2.4

data/ext/rj_schema/rapidjson/test/unittest/itoatest.cpp

@@ -1,160 +0,0 @@
-// Tencent is pleased to support the open source community by making RapidJSON available.
-// 
-// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
-//
-// Licensed under the MIT License (the "License"); you may not use this file except
-// in compliance with the License. You may obtain a copy of the License at
-//
-// http://opensource.org/licenses/MIT
-//
-// Unless required by applicable law or agreed to in writing, software distributed 
-// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
-// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
-// specific language governing permissions and limitations under the License.
-
-#include "unittest.h"
-#include "rapidjson/internal/itoa.h"
-
-#ifdef __GNUC__
-RAPIDJSON_DIAG_PUSH
-RAPIDJSON_DIAG_OFF(type-limits)
-#endif
-
-using namespace rapidjson::internal;
-
-template <typename T>
-struct Traits {
-};
-
-template <>
-struct Traits<uint32_t> {
-    enum { kBufferSize = 11 };
-    enum { kMaxDigit = 10 };
-    static uint32_t Negate(uint32_t x) { return x; }
-};
-
-template <>
-struct Traits<int32_t> {
-    enum { kBufferSize = 12 };
-    enum { kMaxDigit = 10 };
-    static int32_t Negate(int32_t x) { return -x; }
-};
-
-template <>
-struct Traits<uint64_t> {
-    enum { kBufferSize = 21 };
-    enum { kMaxDigit = 20 };
-    static uint64_t Negate(uint64_t x) { return x; }
-};
-
-template <>
-struct Traits<int64_t> {
-    enum { kBufferSize = 22 };
-    enum { kMaxDigit = 20 };
-    static int64_t Negate(int64_t x) { return -x; }
-};
-
-template <typename T>
-static void VerifyValue(T value, void(*f)(T, char*), char* (*g)(T, char*)) {
-    char buffer1[Traits<T>::kBufferSize];
-    char buffer2[Traits<T>::kBufferSize];
-
-    f(value, buffer1);
-    *g(value, buffer2) = '\0';
-    
-
-    EXPECT_STREQ(buffer1, buffer2);
-}
-
-template <typename T>
-static void Verify(void(*f)(T, char*), char* (*g)(T, char*)) {
-    // Boundary cases
-    VerifyValue<T>(0, f, g);
-    VerifyValue<T>((std::numeric_limits<T>::min)(), f, g);
-    VerifyValue<T>((std::numeric_limits<T>::max)(), f, g);
-
-    // 2^n - 1, 2^n, 10^n - 1, 10^n until overflow
-    for (int power = 2; power <= 10; power += 8) {
-        T i = 1, last;
-        do {
-            VerifyValue<T>(i - 1, f, g);
-            VerifyValue<T>(i, f, g);
-            if (std::numeric_limits<T>::min() < 0) {
-                VerifyValue<T>(Traits<T>::Negate(i), f, g);
-                VerifyValue<T>(Traits<T>::Negate(i + 1), f, g);
-            }
-            last = i;
-            if (i > static_cast<T>(std::numeric_limits<T>::max() / static_cast<T>(power)))
-                break;
-            i *= static_cast<T>(power);
-        } while (last < i);
-    }
-}
-
-static void u32toa_naive(uint32_t value, char* buffer) {
-    char temp[10];
-    char *p = temp;
-    do {
-        *p++ = static_cast<char>(char(value % 10) + '0');
-        value /= 10;
-    } while (value > 0);
-
-    do {
-        *buffer++ = *--p;
-    } while (p != temp);
-
-    *buffer = '\0';
-}
-
-static void i32toa_naive(int32_t value, char* buffer) {
-    uint32_t u = static_cast<uint32_t>(value);
-    if (value < 0) {
-        *buffer++ = '-';
-        u = ~u + 1;
-    }
-    u32toa_naive(u, buffer);
-}
-
-static void u64toa_naive(uint64_t value, char* buffer) {
-    char temp[20];
-    char *p = temp;
-    do {
-        *p++ = static_cast<char>(char(value % 10) + '0');
-        value /= 10;
-    } while (value > 0);
-
-    do {
-        *buffer++ = *--p;
-    } while (p != temp);
-
-    *buffer = '\0';
-}
-
-static void i64toa_naive(int64_t value, char* buffer) {
-    uint64_t u = static_cast<uint64_t>(value);
-    if (value < 0) {
-        *buffer++ = '-';
-        u = ~u + 1;
-    }
-    u64toa_naive(u, buffer);
-}
-
-TEST(itoa, u32toa) {
-    Verify(u32toa_naive, u32toa);
-}
-
-TEST(itoa, i32toa) {
-    Verify(i32toa_naive, i32toa);
-}
-
-TEST(itoa, u64toa) {
-    Verify(u64toa_naive, u64toa);
-}
-
-TEST(itoa, i64toa) {
-    Verify(i64toa_naive, i64toa);
-}
-
-#ifdef __GNUC__
-RAPIDJSON_DIAG_POP
-#endif

data/ext/rj_schema/rapidjson/test/unittest/jsoncheckertest.cpp

@@ -1,143 +0,0 @@
-// Tencent is pleased to support the open source community by making RapidJSON available.
-// 
-// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
-//
-// Licensed under the MIT License (the "License"); you may not use this file except
-// in compliance with the License. You may obtain a copy of the License at
-//
-// http://opensource.org/licenses/MIT
-//
-// Unless required by applicable law or agreed to in writing, software distributed 
-// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
-// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
-// specific language governing permissions and limitations under the License.
-
-#include "unittest.h"
-
-#include "rapidjson/document.h"
-
-using namespace rapidjson;
-
-static char* ReadFile(const char* filename, size_t& length) {
-    const char *paths[] = {
-        "jsonchecker",
-        "bin/jsonchecker",
-        "../bin/jsonchecker",
-        "../../bin/jsonchecker",
-        "../../../bin/jsonchecker"
-    };
-    char buffer[1024];
-    FILE *fp = 0;
-    for (size_t i = 0; i < sizeof(paths) / sizeof(paths[0]); i++) {
-        sprintf(buffer, "%s/%s", paths[i], filename);
-        fp = fopen(buffer, "rb");
-        if (fp)
-            break;
-    }
-
-    if (!fp)
-        return 0;
-
-    fseek(fp, 0, SEEK_END);
-    length = static_cast<size_t>(ftell(fp));
-    fseek(fp, 0, SEEK_SET);
-    char* json = static_cast<char*>(malloc(length + 1));
-    size_t readLength = fread(json, 1, length, fp);
-    json[readLength] = '\0';
-    fclose(fp);
-    return json;
-}
-
-struct NoOpHandler {
-    bool Null() { return true; }
-    bool Bool(bool) { return true; }
-    bool Int(int) { return true; }
-    bool Uint(unsigned) { return true; }
-    bool Int64(int64_t) { return true; }
-    bool Uint64(uint64_t) { return true; }
-    bool Double(double) { return true; }
-    bool RawNumber(const char*, SizeType, bool) { return true; }
-    bool String(const char*, SizeType, bool) { return true; }
-    bool StartObject() { return true; }
-    bool Key(const char*, SizeType, bool) { return true; }
-    bool EndObject(SizeType) { return true; }
-    bool StartArray() { return true; }
-    bool EndArray(SizeType) { return true; }
-};
-
-
-TEST(JsonChecker, Reader) {
-    char filename[256];
-
-    // jsonchecker/failXX.json
-    for (int i = 1; i <= 33; i++) {
-        if (i == 1) // fail1.json is valid in rapidjson, which has no limitation on type of root element (RFC 7159).
-            continue;
-        if (i == 18)    // fail18.json is valid in rapidjson, which has no limitation on depth of nesting.
-            continue;
-
-        sprintf(filename, "fail%d.json", i);
-        size_t length;
-        char* json = ReadFile(filename, length);
-        if (!json) {
-            printf("jsonchecker file %s not found", filename);
-            ADD_FAILURE();
-            continue;
-        }
-
-        // Test stack-based parsing.
-        GenericDocument<UTF8<>, CrtAllocator> document; // Use Crt allocator to check exception-safety (no memory leak)
-        document.Parse(json);
-        EXPECT_TRUE(document.HasParseError()) << filename;
-
-        // Test iterative parsing.
-        document.Parse<kParseIterativeFlag>(json);
-        EXPECT_TRUE(document.HasParseError()) << filename;
-
-        // Test iterative pull-parsing.
-        Reader reader;
-        StringStream ss(json);
-        NoOpHandler h;
-        reader.IterativeParseInit();
-        while (!reader.IterativeParseComplete()) {
-            if (!reader.IterativeParseNext<kParseDefaultFlags>(ss, h))
-                break;
-        }
-        EXPECT_TRUE(reader.HasParseError()) << filename;
-        
-        free(json);
-    }
-
-    // passX.json
-    for (int i = 1; i <= 3; i++) {
-        sprintf(filename, "pass%d.json", i);
-        size_t length;
-        char* json = ReadFile(filename, length);
-        if (!json) {
-            printf("jsonchecker file %s not found", filename);
-            continue;
-        }
-
-        // Test stack-based parsing.
-        GenericDocument<UTF8<>, CrtAllocator> document; // Use Crt allocator to check exception-safety (no memory leak)
-        document.Parse(json);
-        EXPECT_FALSE(document.HasParseError()) << filename;
-
-        // Test iterative parsing.
-        document.Parse<kParseIterativeFlag>(json);
-        EXPECT_FALSE(document.HasParseError()) << filename;
-        
-        // Test iterative pull-parsing.
-        Reader reader;
-        StringStream ss(json);
-        NoOpHandler h;
-        reader.IterativeParseInit();
-        while (!reader.IterativeParseComplete()) {
-            if (!reader.IterativeParseNext<kParseDefaultFlags>(ss, h))
-                break;
-        }
-        EXPECT_FALSE(reader.HasParseError()) << filename;
-
-        free(json);
-    }
-}

data/ext/rj_schema/rapidjson/test/unittest/namespacetest.cpp

@@ -1,70 +0,0 @@
-// Tencent is pleased to support the open source community by making RapidJSON available.
-// 
-// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
-//
-// Licensed under the MIT License (the "License"); you may not use this file except
-// in compliance with the License. You may obtain a copy of the License at
-//
-// http://opensource.org/licenses/MIT
-//
-// Unless required by applicable law or agreed to in writing, software distributed 
-// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
-// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
-// specific language governing permissions and limitations under the License.
-
-#include "unittest.h"
-
-// test another instantiation of RapidJSON in a different namespace 
-
-#define RAPIDJSON_NAMESPACE my::rapid::json
-#define RAPIDJSON_NAMESPACE_BEGIN namespace my { namespace rapid { namespace json {
-#define RAPIDJSON_NAMESPACE_END } } }
-
-// include lots of RapidJSON files
-
-#include "rapidjson/document.h"
-#include "rapidjson/writer.h"
-#include "rapidjson/filereadstream.h"
-#include "rapidjson/filewritestream.h"
-#include "rapidjson/encodedstream.h"
-#include "rapidjson/stringbuffer.h"
-
-static const char json[] = "{\"hello\":\"world\",\"t\":true,\"f\":false,\"n\":null,\"i\":123,\"pi\":3.1416,\"a\":[1,2,3,4]}";
-
-TEST(NamespaceTest,Using) {
-    using namespace RAPIDJSON_NAMESPACE;
-    typedef GenericDocument<UTF8<>, CrtAllocator> DocumentType;
-    DocumentType doc;
-
-    doc.Parse(json);
-    EXPECT_TRUE(!doc.HasParseError());
-}
-
-TEST(NamespaceTest,Direct) {
-    typedef RAPIDJSON_NAMESPACE::Document Document;
-    typedef RAPIDJSON_NAMESPACE::Reader Reader;
-    typedef RAPIDJSON_NAMESPACE::StringStream StringStream;
-    typedef RAPIDJSON_NAMESPACE::StringBuffer StringBuffer;
-    typedef RAPIDJSON_NAMESPACE::Writer<StringBuffer> WriterType;
-
-    StringStream s(json);
-    StringBuffer buffer;
-    WriterType writer(buffer);
-    buffer.ShrinkToFit();
-    Reader reader;
-    reader.Parse(s, writer);
-
-    EXPECT_STREQ(json, buffer.GetString());
-    EXPECT_EQ(sizeof(json)-1, buffer.GetSize());
-    EXPECT_TRUE(writer.IsComplete());
-
-    Document doc;
-    doc.Parse(buffer.GetString());
-    EXPECT_TRUE(!doc.HasParseError());
-
-    buffer.Clear();
-    writer.Reset(buffer);
-    doc.Accept(writer);
-    EXPECT_STREQ(json, buffer.GetString());
-    EXPECT_TRUE(writer.IsComplete());
-}

data/ext/rj_schema/rapidjson/test/unittest/ostreamwrappertest.cpp

@@ -1,92 +0,0 @@
-// Tencent is pleased to support the open source community by making RapidJSON available.
-// 
-// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
-//
-// Licensed under the MIT License (the "License"); you may not use this file except
-// in compliance with the License. You may obtain a copy of the License at
-//
-// http://opensource.org/licenses/MIT
-//
-// Unless required by applicable law or agreed to in writing, software distributed 
-// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR 
-// CONDITIONS OF ANY KIND, either express or implied. See the License for the 
-// specific language governing permissions and limitations under the License.
-
-#include "unittest.h"
-
-#include "rapidjson/ostreamwrapper.h"
-#include "rapidjson/encodedstream.h"
-#include "rapidjson/document.h"
-#include <sstream>
-#include <fstream>
-
-using namespace rapidjson;
-using namespace std;
-
-template <typename StringStreamType>
-static void TestStringStream() {
-    typedef typename StringStreamType::char_type Ch;
-
-    Ch s[] = { 'A', 'B', 'C', '\0' };
-    StringStreamType oss(s);
-    BasicOStreamWrapper<StringStreamType> os(oss);
-    for (size_t i = 0; i < 3; i++)
-        os.Put(s[i]);
-    os.Flush();
-    for (size_t i = 0; i < 3; i++)
-        EXPECT_EQ(s[i], oss.str()[i]);
-}
-
-TEST(OStreamWrapper, ostringstream) {
-    TestStringStream<ostringstream>();
-}
-
-TEST(OStreamWrapper, stringstream) {
-    TestStringStream<stringstream>();
-}
-
-TEST(OStreamWrapper, wostringstream) {
-    TestStringStream<wostringstream>();
-}
-
-TEST(OStreamWrapper, wstringstream) {
-    TestStringStream<wstringstream>();
-}
-
-TEST(OStreamWrapper, cout) {
-    OStreamWrapper os(cout);
-    const char* s = "Hello World!\n";
-    while (*s)
-        os.Put(*s++);
-    os.Flush();
-}
-
-template <typename FileStreamType>
-static void TestFileStream() {
-    char filename[L_tmpnam];
-    FILE* fp = TempFile(filename);
-    fclose(fp);
-
-    const char* s = "Hello World!\n";
-    {
-        FileStreamType ofs(filename, ios::out | ios::binary);
-        BasicOStreamWrapper<FileStreamType> osw(ofs);
-        for (const char* p = s; *p; p++)
-            osw.Put(*p);
-        osw.Flush();
-    }
-
-    fp = fopen(filename, "r");
-	ASSERT_TRUE( fp != NULL );
-    for (const char* p = s; *p; p++)
-        EXPECT_EQ(*p, static_cast<char>(fgetc(fp)));
-    fclose(fp);
-}
-
-TEST(OStreamWrapper, ofstream) {
-    TestFileStream<ofstream>();
-}
-
-TEST(OStreamWrapper, fstream) {
-    TestFileStream<fstream>();
-}