ripxplore 0.16.1 → 0.17.0

data/lib/host_systems/acorn_symbols.yaml

@@ -0,0 +1,409 @@
+--
+0x200: USERV
+0x202: BRKV
+0x204: IRQ1V
+0x206: IRQ2V
+0x208: CLIV	* commands
+0x20A: BYTEV
+0x20C: WORDV
+0x20E: WRCHV output char
+0x210: RDCHV get character
+0x212: FILEV *LOAD / *SAVE
+0x214: ARGSV misc file info
+0x216: BGETV get 1 byte from file
+0x218: BPUTV put 1 byte to file
+0x21A: GBPBV misc file transfers
+0x21C: FINDV open/close files
+0x21E: FSCV filing system ctrls
+0x220: EVENTV cause an event 
+0x222: UPTV user print vector	 
+0x224: NETV all Econet data
+0x226: VDUV all VDU output 
+0x228: KEYV all key presses 
+0x22a: INSV insertion to bufer
+0x22c: REMV	removal from buffer
+0x22e: CNPV count/purge buffer
+0xfe00: 6845 CRT controller address register
+0xfe01: 6845 CRT controller data register
+0xfe08: 6850 ACIA control & status registers
+0xfe09: 6850 ACIA tx/rx registers
+0xfe10: SERPROC serial processor
+0xfe18: ADC (UAPD 7002) data latch / status registers
+0xfe19: ADC (UAPD 7002) data high byte
+0xfe1A: ADC (UAPD 7002) data low byte
+0xfe20: VIDPROC - video control register
+0xfe21: VIDPROC - palette
+0xfe24: Floppy Disc Interface Control Register
+0xfe28: Floppy Disc Controller (1770)
+0xfe30: ROMSEL - ROM select register
+0xfe34: ACCCON - Access Control Register
+0xfe38: INTOFF - Network NMI disable
+0xfe3c: INTON - Network NMI enable
+0xfe40: System 6522 VIA - slow peripheral control bus
+0xfe41: System 6522 VIA - slow peripheral data bus
+0xfe42: System 6522 VIA - data direction slow peripheral control bus
+0xfe43: System 6522 VIA - data direction slow peripheral data bus
+0xfe44: System 6522 VIA - timer 1 low order counter/latch
+0xfe45: System 6522 VIA - timer 1 high order counter
+0xfe46: System 6522 VIA - timer 1 low order latch
+0xfe47: System 6522 VIA - timer 1 high order latch
+0xfe48: System 6522 VIA - timer 2 low order counter/latch
+0xfe49: System 6522 VIA - timer 2 high order counter
+0xfe4A: System 6522 VIA - shift register
+0xfe4b: System 6522 VIA - aux control register
+0xfe4c: System 6522 VIA - peripheral control register
+0xfe4d: System 6522 VIA - interrupt flag register
+0xfe4e: System 6522 VIA - interrupt enable register
+0xfe4f: System 6522 VIA - slow peripheral data bus (no handshake)
+0xfe60: User 6522 VIA - user port
+0xfe61: User 6522 VIA - printer data
+0xfe62: User 6522 VIA - data direction register - user port
+0xfe63: User 6522 VIA - data direction register - printer port
+0xfe64: User 6522 VIA - timer 1 low order latch/counter
+0xfe65: User 6522 VIA - timer 1 high order counter
+0xfe66: User 6522 VIA - timer 1 low order latch
+0xfe67: User 6522 VIA - timer 1 high order latch
+0xfe68: User 6522 VIA - timer 2 low order latch/counter
+0xfe69: User 6522 VIA - timer 2 high order latch
+0xfe6A: User 6522 VIA - shift register
+0xfe6b: User 6522 VIA - aux control register
+0xfe6c: User 6522 VIA - peripheral control register
+0xfe6d: User 6522 VIA - interrupt flag register
+0xfe6e: User 6522 VIA - interrupt enable register
+0xfe6f: User 6522 VIA - printer data (no handshake)
+
+0xfe80: third party hardware (Modem?)
+0xfeA0: network interface - 2MHz
+0xfew0: TUBE - 2 MHz
+0xffb3: OSWRSC write to paged memory
+0xffb9: OSRDSC read from paged memory (Y=ROM number)
+0xffbc: SVDU raw VDU entry point
+0xffbf: OSEVEN cause an event
+0xffc2: GSINIT Prepare a string in memory for processing by GSREAD
+0xffc5: GSREAD Read the next character from the string last initialised by GSINIT
+0xffc8: NVRDCH unvectored OSRDCH
+0xffcb: NVWRCH unvectored OSWRCH
+0xffce: OSFIND open/close files
+0xffd1: OSGBPB misc file transfers
+0xffd4: OSBPUT put 1 byte to file
+0xffd7: OSBGET get 1 byte from file
+0xffda: OSARGS misc. file info
+0xffdd: OSFILE *LOAD/*SAVE
+0xffe0: OSRDCH read character
+0xffe3: OSASCI	OSWRCH with CR=CRLF
+0xffe7: OSNEWL	print a new line
+0xffee: OSWRCH output char
+0xFFF1: 
+ - OSWORD
+ - { a: 0x00, caption: Input line }
+ - { a: 0x01, caption: Read system clock (=TIME) }
+ - { a: 0x02, caption: Write system clock (TIME=) }
+ - { a: 0x03, caption: Read interval timer }
+ - { a: 0x04, caption: Write interval timer }
+ - { a: 0x05, caption: Read I/O processor memory }
+ - { a: 0x06, caption: Write I/O processor memory }
+ - { a: 0x07, caption: Generate a sound }
+ - { a: 0x08, caption: Define a sound envelope }
+ - { a: 0x09, caption: Read screen pixel value }
+ - { a: 0x0A, caption: Read character definition }
+ - { a: 0x0B, caption: Read palette }
+ - { a: 0x0C, caption: Write palette }
+ - { a: 0x0D, caption: Read last two graphics positions }
+ - { a: 0x0E, caption: Reads CMOS clock }
+ - { a: 0x0F, caption: Write CMOS clock }
+ - { a: 0x10, caption: Network transmit }
+ - { a: 0x11, caption: Open or read network receive block }
+ - { a: 0x12, caption: Read argument block and restore protection mask NFS }
+ - { a: 0x13, caption: Read/Write NFS information }
+ - { a: 0x14, caption: Various NFS/Network functions }
+ - { a: 0x15, caption: Read/Write mouse and pointer infomation }
+ - { a: 0x16, caption: Set screen base start }
+ - { a: 0x18, caption: IP Network transmit }
+ - { a: 0x19, caption: IP Open or read network receive block }
+ - { a: 0x20, caption: Acorn User Windowing System }
+ - { a: 0x20, caption: Transfer data between Tube and I/O }
+ - { a: 0x21, caption: Execute code in I/O processor }
+ - { a: 0x36, caption: Stop Press Routines }
+ - { a: 0x40, caption: Read mouse pointer and button state }
+ - { a: 0x41, caption: Miscellaneous graphics commands }
+ - { a: 0x42, caption: Sideways RAM transfer }
+ - { a: 0x43, caption: Load/Save into/from sideways Ram }
+ - { a: 0x44, caption: AMX Super Art ROM commands }
+ - { a: 0x45, caption: Move/Swap memory }
+ - { a: 0x45, caption: Digitise picture }
+ - { a: 0x46, caption: Allocated to BBC soft, probably unused. }
+ - { a: 0x47, caption: PrettyPrint }
+ - { a: 0x4C, caption: Extended communications control }
+ - { a: 0x4E, caption: Initialise heap }
+ - { a: 0x4F, caption: Claim area from heap }
+ - { a: 0x50, caption: Release area to heap }
+ - { a: 0x50, caption: Read Real-Time Clock }
+ - { a: 0x51, caption: Get maximum heap block size }
+ - { a: 0x51, caption: Write Real-Time Clock }
+ - { a: 0x51, caption: HKSET Support }
+ - { a: 0x51, caption: TORCH }
+ - { a: 0x52, caption: Initialise file buffer }
+ - { a: 0x52, caption: TORCH }
+ - { a: 0x53, caption: Finish with file buffer }
+ - { a: 0x53, caption: TORCH }
+ - { a: 0x54, caption: Flush file buffer }
+ - { a: 0x55, caption: Get bytes from file buffer }
+ - { a: 0x56, caption: Put bytes to file buffer }
+ - { a: 0x57, caption: Create new binary tree node }
+ - { a: 0x58, caption: Insert node into binary tree }
+ - { a: 0x59, caption: Delete node from binary tree }
+ - { a: 0x5A, caption: Find node in binary tree }
+ - { a: 0x5A, caption: HADFS Sector read/write/access }
+ - { a: 0x5B, caption: Traverse binary tree }
+ - { a: 0x5C, caption: Balance binary tree }
+ - { a: 0x5D, caption: Parse option patterns }
+ - { a: 0x5E, caption: Get string with control character interpretation DVR }
+ - { a: 0x5F, caption: "Monitor reads across tube" }
+ - { a: 0x60, caption: Read Videodisk MSN and status byte }
+ - { a: 0x61, caption: Read free space on VFS disk }
+ - { a: 0x62, caption: Access LVROM controller }
+ - { a: 0x63, caption: Read last VFS error number }
+ - { a: 0x64, caption: Read current F-code }
+ - { a: 0x6E, caption: Read byte from shadow Ram board }
+ - { a: 0x6F, caption: Write byte to shadow Ram board }
+ - { a: 0x70, caption: Read master sequence number and status byte }
+ - { a: 0x71, caption: Read free space on disc }
+ - { a: 0x72, caption: Read/Write MFM sectors }
+ - { a: 0x73, caption: Read information about last error }
+ - { a: 0x7A, caption: Teletext commands }
+ - { a: 0x7B, caption: Modem commands }
+ - { a: 0x7B, caption: Modem commands }
+ - { a: 0x7B, caption: Move a block of memory }
+ - { a: 0x7C, caption: Multiple track single density FDC command }
+ - { a: 0x7D, caption: Read cycle number of disc }
+ - { a: 0x7E, caption: Read disc (or directory) size }
+ - { a: 0x7F, caption: Single track single density FDC command }
+ - { a: 0x80, caption: IEEE Command }
+ - { a: 0x80, caption: Springboard DOS INT }
+ - { a: 0x81, caption: Springboard }
+ - { a: 0x82, caption: Read/Write parameters }
+ - { a: 0x83, caption: Data transmission }
+ - { a: 0x84, caption: Ring polling }
+ - { a: 0x85, caption: Springboard }
+ - { a: 0x86, caption: Springboard }
+ - { a: 0x89, caption: Read teletext pixel }
+ - { a: 0x8A, caption: Set teletext pixel }
+ - { a: 0x90, caption: "Service interface - Network" }
+ - { a: 0xA0, caption: "Isolated word recogniser" }
+ - { a: 0xB0, caption: GoMMC access & control }
+ - { a: 0xB2, caption: Advanced BASIC (BASIC V) support }
+ - { a: 0xBB, caption: Morley Electronics RAMdisc }
+ - { a: 0xBE, caption: Disassemble data }
+ - { a: 0xBF, caption: Fetch URI }
+ - { a: 0xC0, caption: Sockets and Resolver interface }
+ - { a: 0xC8, caption: SWI Operation on Host ARM }
+ - { a: 0xFA, caption: Data transfer over Tube }
+ - { a: 0xFB, caption: WD1770/2 Floppy Disk Control }
+ - { a: 0xFC, caption: DOS CRTC Control }
+ - { a: 0xFE, caption: DOS Text output (unimplemented) }
+ - { a: 0xFE, caption: Z80 SP Disc Read }
+ - { a: 0xFF, caption: DOS fast screen control }
+ - { a: 0xFF, caption: Z80 Data transfer over Tube  }
+ 
+0xFFF4:
+ - OSBYTE
+ - { a: 0x00, caption: OS Version Number Report }
+ - { a: 0x01, caption: Read/Write User Flag }
+ - { a: 0x02, caption: Specify Input Stream }
+ - { a: 0x03, caption: Specify Output Stream(s) }
+ - { a: 0x04, caption: Define action of cursor editing keys }
+ - { a: 0x05, caption: Printer Driver Type }
+ - { a: 0x06, caption: Printer Ignore Character }
+ - { a: 0x07, caption: RS423 Baud Receive rate }
+ - { a: 0x08, caption: RS423 Baud Transmit Rate }
+ - { a: 0x09, caption: First Colour Duration }
+ - { a: 0x0A, caption: Second Colour Duration }
+ - { a: 0x0B, caption: Auto Repeat Delay }
+ - { a: 0x0C, caption: Auto Repeat Period }
+ - { a: 0x0D, caption: Disable Event }
+ - { a: 0x0E, caption: Enable Event }
+ - { a: 0x0F, caption: Flush all buffers/input buffer }
+ - { a: 0x10, caption: Set maximum number of ADC chanel }
+ - { a: 0x11, caption: Force an ADC conversion }
+ - { a: 0x12, caption: Reset F-key definitions }
+ - { a: 0x13, caption: Wait for Vertical Retrace }
+ - { a: 0x14, caption: Explode user defined character font RAM }
+ - { a: 0x15, caption: Flush Selected Buffer }
+ - { a: 0x16, caption: Increment Polling Semaphore }
+ - { a: 0x17, caption: Decrement Polling Semaphore }
+ - { a: 0x18, caption: Select external sound system. }
+ - { a: 0x19, caption: Reset a group of font definitions }
+ - { a: 0x20, caption: Watford32K - Read top of memory }
+ - { a: 0x21, caption: Watford32K - Read top of memory for mode }
+ - { a: 0x22, caption: Watford32K - Read/Write RAM switch }
+ - { a: 0x23, caption: Watford32K - Read workspace address }
+ - { a: 0x24, caption: Watford32K - Read/Write RAM buffer bank }
+ - { a: 0x32, caption: NetFS - Poll transmit }
+ - { a: 0x33, caption: NetFS - Poll receive }
+ - { a: 0x34, caption: NetFS - Delete receive block & enable/disable events on reception }
+ - { a: 0x35, caption: NetFS - Disconnect REMOTE }
+ - { a: 0x3F, caption: ZNOS CP/M - Reload CCP and BDOS }
+ - { a: 0x43, caption: ParaMax - Enter CNC control program }
+ - { a: 0x44, caption: Test sideways RAM presence }
+ - { a: 0x45, caption: Test PSEUDO/Absolute usage }
+ - { a: 0x46, caption: Read/write country number }
+ - { a: 0x47, caption: Read/write alphabet or keyboard number }
+ - { a: 0x5A, caption: Find/set ROM status }
+ - { a: 0x60, caption: Terminal Emulator flow control }
+ - { a: 0x61, caption: HKSET Page timeout monitor }
+ - { a: 0x62, caption: HKSET Poll received page status }
+ - { a: 0x64, caption: Enter SPY debugger }
+ - { a: 0x6A, caption: Select pointer/activate mouse }
+ - { a: 0x6B, caption: External/Internal 1MHz Bus }
+ - { a: 0x6C, caption: Main/Shadow RAM Usage }
+ - { a: 0x6D, caption: Make Temporary FS permanent }
+ - { a: 0x6E, caption: Early Watford DFS - Control drive double-stepping}
+ - { a: 0x6F, caption: Read/Write shadow RAM switch }
+ - { a: 0x70, caption: Select Main/Shadow for VDU access }
+ - { a: 0x71, caption: Select Main/Shadow for Display hardware }
+ - { a: 0x72, caption: Write to Shadow/Main toggle }
+ - { a: 0x73, caption: Blank/restore palette }
+ - { a: 0x74, caption: Reset internal sound system }
+ - { a: 0x75, caption: Read VDU Status Byte }
+ - { a: 0x76, caption: Reflect keyboard status in LEDs }
+ - { a: 0x77, caption: Close all Spool/Exec files }
+ - { a: 0x78, caption: Write Key Pressed Data }
+ - { a: 0x79, caption: Keyboard Scan }
+ - { a: 0x7A, caption: Keyboard Scan from &10 }
+ - { a: 0x7B, caption: Printer Dormancy Warning }
+ - { a: 0x7C, caption: Clear ESCAPE Condition informing Tube if necessary }
+ - { a: 0x7D, caption: Set ESCAPE conditon }
+ - { a: 0x7E, caption: Acknowledge ESCAPE Condition }
+ - { a: 0x7F, caption: Check for EOF }
+ - { a: 0x80, caption: Read ADC Channel/Buffer/Mouse/Device status }
+ - { a: 0x81, caption: Read Key with Time Limit}
+ - { a: 0x81, y: 0xFF, caption: Read OS version }
+ - { a: 0x82, caption: Read High Order Address }
+ - { a: 0x83, caption: Read bottom of user memory (OSHWM) }
+ - { a: 0x84, caption: Read top of user memory }
+ - { a: 0x85, caption: Read base of display RAM for a given mode }
+ - { a: 0x86, caption: Text cursor position }
+ - { a: 0x87, caption: Character at text cursor and screen MODE }
+ - { a: 0x88, caption: Perform *CODE }
+ - { a: 0x89, caption: Cassete Motor Control }
+ - { a: 0x8A, caption: Place character into buffer }
+ - { a: 0x8B, caption: Set filing system attributes (do *OPT) }
+ - { a: 0x8C, caption: Select Tape FS at 1200/300 baud (do *TAPE) }
+ - { a: 0x8D, caption: Select RFS (do *ROM) }
+ - { a: 0x8E, caption: Enter Langauge ROM }
+ - { a: 0x8F, caption: Issue SWR Service Request }
+ - { a: 0x90, caption: Set TV offset and interlacing (do *TVx,y) }
+ - { a: 0x91, caption: Read character from buffer }
+ - { a: 0x92, caption: Read FRED }
+ - { a: 0x93, caption: Write FRED }
+ - { a: 0x94, caption: Read JIM }
+ - { a: 0x95, caption: Write JIM }
+ - { a: 0x96, caption: Read SHELIA }
+ - { a: 0x97, caption: Write SHELIA }
+ - { a: 0x98, caption: Examine Buffer Status }
+ - { a: 0x99, caption: Write character into input buffer checking for ESCAPE }
+ - { a: 0x9A, caption: Write to Video ULA control register and RAM copy }
+ - { a: 0x9B, caption: Write to Video ULA palette register and RAM copy }
+ - { a: 0x9C, caption: Read/write ACIA registers }
+ - { a: 0x9D, caption: Fast Tube BPUT }
+ - { a: 0x9E, caption: Read from Speech Processor }
+ - { a: 0x9F, caption: Write to Speech Processor }
+ - { a: 0xA0, caption: Read VDU Variable }
+ - { a: 0xA1, caption: Read CMOS RAM }
+ - { a: 0xA2, caption: Write CMOS RAM }
+ - { a: 0xA3, caption: Reserved for applications software }
+ - { a: 0xA4, caption: Check Processor Type }
+ - { a: 0xA5, caption: Read output Cursor Position }
+ - { a: 0xA6, caption: Read Start of MOS variables }
+ - { a: 0xA7, caption: Read Start of MOS variables }
+ - { a: 0xA8, caption: Read address of extended vector table }
+ - { a: 0xA9, caption: Read address of extended vector table }
+ - { a: 0xAA, caption: Read address of ROM info table }
+ - { a: 0xAB, caption: Read address of ROM info table }
+ - { a: 0xAC, caption: Read address of keyboard table }
+ - { a: 0xAD, caption: Read address of keyboard table }
+ - { a: 0xAE, caption: Read address of VDU variables }
+ - { a: 0xAF, caption: Read address of VDU variables }
+ - { a: 0xB0, caption: Read/Write Tape Timeout }
+ - { a: 0xB1, caption: Read/Write input device }
+ - { a: 0xB2, caption: Read/Write keyboard interrupt enable }
+ - { a: 0xB3, caption: Read/Write primary OSHWM/Read/Write ROM polling semaphore }
+ - { a: 0xB4, caption: Read/Write OSHWM }
+ - { a: 0xB5, caption: Read/Write RS423 interpretation }
+ - { a: 0xB6, caption: Read/Write Font Explosion/Read NOIGNORE Status }
+ - { a: 0xB7, caption: Read/Write TAPE/ROM switch }
+ - { a: 0xB8, caption: Read/Write MOS copy of Video ULA control register }
+ - { a: 0xB9, caption: Read/Write MOS copy of palette register/Read/Write ROM polling semaphore }
+ - { a: 0xBA, caption: Read/Write ROM active on last BRK }
+ - { a: 0xBB, caption: Read/Write ROM number of BASIC }
+ - { a: 0xBC, caption: Read/Write current ADC channel number }
+ - { a: 0xBD, caption: Read/Write highest ADC channel number }
+ - { a: 0xBE, caption: Read/Write ADC type }
+ - { a: 0xBF, caption: Read/Write RS423 busy flag }
+ - { a: 0xC0, caption: Read/Write ACIA control register }
+ - { a: 0xC1, caption: Read/Write flash counter }
+ - { a: 0xC2, caption: Read/Write first colour duration }
+ - { a: 0xC3, caption: Read/Write second colour duration }
+ - { a: 0xC4, caption: Read/Write auto Repeat Delay }
+ - { a: 0xC5, caption: Read/Write auto Repeat Period }
+ - { a: 0xC6, caption: Read/Write *EXEC file handle }
+ - { a: 0xC7, caption: Read/Write *SPOOL file handle }
+ - { a: 0xC8, caption: Read/Write BREAK/ESCAPE effect }
+ - { a: 0xC9, caption: Read/Write keyboard Enable/Disable }
+ - { a: 0xCA, caption: Read/Write Keyboard Status }
+ - { a: 0xCB, caption: Read/Write RS423 in buffer minimum }
+ - { a: 0xCC, caption: Read/Write RS423 ignore flag }
+ - { a: 0xCD, caption: Read/Write RS423 destination/Read/Write user key string length }
+ - { a: 0xCE, caption: Read/Write ECONET call intepretation }
+ - { a: 0xCF, caption: Read/Write ECONET input intepretation }
+ - { a: 0xD0, caption: Read/Write ECONET output intepretation }
+ - { a: 0xD1, caption: Read/Write speech supression status }
+ - { a: 0xD2, caption: Read/Write sound supression flag }
+ - { a: 0xD3, caption: Read/Write channel for BELL }
+ - { a: 0xD4, caption: Read/Write volume/ENVELOPE For BELL }
+ - { a: 0xD5, caption: Read/Write frequency for BELL }
+ - { a: 0xD6, caption: Read/Write duration for BELL }
+ - { a: 0xD7, caption: Read/Write Startup Message Enable/Disable }
+ - { a: 0xD8, caption: Read/Write user key string length }
+ - { a: 0xD9, caption: Read/Write paged line count }
+ - { a: 0xDA, caption: Read/Write VDU Queue length }
+ - { a: 0xDB, caption: Read/Write ASCII code for TAB }
+ - { a: 0xDC, caption: Read/Write ASCII for ESCAPE }
+ - { a: 0xDD, caption: Read/Write Intrepretation ASCII 197-207 }
+ - { a: 0xDE, caption: Read/Write Interpretation ASCII 208-223 }
+ - { a: 0xDF, caption: Read/Write Interpretation ASCII 224-239 }
+ - { a: 0xE0, caption: Read/Write Interpretation ASCII 240-255 }
+ - { a: 0xE1, caption: Read/Write Interpretation of F-Keys }
+ - { a: 0xE2, caption: Read/Write Interpretation of Shift-F-Keys }
+ - { a: 0xE3, caption: Read/Write Interpretation of Ctrl-F-Keys }
+ - { a: 0xE4, caption: Read/Write Interpretation of Ctrl-Shift-Fkeys }
+ - { a: 0xE5, caption: Read/Write ESCAPE key status }
+ - { a: 0xE6, caption: Read/Write ESCAPE effects }
+ - { a: 0xE7, caption: Read/Write 6522 User IRQ Mask }
+ - { a: 0xE8, caption: Read/Write 6850 IRQ Mask }
+ - { a: 0xE9, caption: Read/Write 6522 System IRQ Mask }
+ - { a: 0xEA, caption: Read/Write Tube present flag }
+ - { a: 0xEB, caption: Read/Write speech Processor Pressence }
+ - { a: 0xEC, caption: Read/Write character output device status }
+ - { a: 0xED, caption: Read/Write Cursor Edit State }
+ - { a: 0xEE, caption: Read/Write base of numeric pad }
+ - { a: 0xEF, caption: Read/Write shadow state }
+ - { a: 0xF0, caption: Read/Write Country flag }
+ - { a: 0xF1, caption: Read/Write value written by *FX1 }
+ - { a: 0xF2, caption: Read/Write OS copy of serial ULA register }
+ - { a: 0xF3, caption: Read/Write offset to current TIME value }
+ - { a: 0xF4, caption: Read/Write soft key consistency flag }
+ - { a: 0xF5, caption: Read/Write printer Type }
+ - { a: 0xF6, caption: Read/Write printer Ignore character set by *FX6 }
+ - { a: 0xF7, caption: Read/Write Intercept BREAK/Define action of BREAK key }
+ - { a: 0xF8, caption: Read/Write LSB BREAK intercepter jump address }
+ - { a: 0xF9, caption: Read/Write MSB BREAK intercepter jump address }
+ - { a: 0xFA, caption: Read/Write RAM used for VDU access, Watford RAM board status }
+ - { a: 0xFB, caption: Read/Write RAM used for Display hardware }
+ - { a: 0xFC, caption: Read/Write current language Rom Number }
+ - { a: 0xFD, caption: Read/Write Last Reset Type }
+ - { a: 0xFE, caption: Read/Write available RAM/Read/Write effect of shift/ctrl on Numeric pad }
+ - { a: 0xFF, caption: Read/Write startup Options  }
+0xFFF7: OSCLI (XY pointer to command string)
+
+

data/lib/image_formats/AcornDsk.rb

@@ -0,0 +1,70 @@
+$:.unshift(File.dirname(__FILE__)) unless
+	$:.include?(File.dirname(__FILE__)) || $:.include?(File.expand_path(File.dirname(__FILE__)))
+
+$:.unshift(File.dirname(__FILE__+"\\..")) unless
+	$:.include?(File.dirname(__FILE__+"\\..")) || $:.include?(File.expand_path(File.dirname(__FILE__+"\\..")))
+
+require 'ImageFormat'
+
+#Acorn 8-bit series disk image
+
+class AcornDsk < ImageFormat
+
+def self.possible_extensions
+    ['.ssd','.bbc']
+end  
+
+def initialize(file_bytes)
+  @file_bytes=file_bytes
+  @sector_length=256
+  @sectors_per_track=10
+  @track_count=file_bytes.length/(@sectors_per_track*@sector_length)
+end
+
+def self.host_system
+    AcornBBC
+end  
+  
+def sectors_in_track(track_no)
+def sectors_in_track(track_no)
+  (0..@sectors_per_track).collect
+end
+end
+
+# how many tracks could be interpreted by this image format?
+def track_count
+  @track_count
+end
+
+def get_sector(track,sector)  
+  start_byte=track*@sectors_per_track*@sector_length+(sector*@sector_length)
+#  puts "Track: #{track}, sector: #{sector}, start_byte: #{start_byte}"
+  @file_bytes[start_byte,@sector_length]
+end
+
+end
+
+# == Author
+# Jonno Downes (jonno@jamtronix.com)
+#
+# == Copyright
+# Copyright (c) 2011 Jonno Downes (jonno@jamtronix.com)
+#
+#Permission is hereby granted, free of charge, to any person obtaining
+#a copy of this software and associated documentation files (the
+#"Software"), to deal in the Software without restriction, including
+#without limitation the rights to use, copy, modify, merge, publish,
+#distribute, sublicense, and/or sell copies of the Software, and to
+#permit persons to whom the Software is furnished to do so, subject to
+#the following conditions:
+
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.