rio 0.3.4 → 0.3.6

data/doc/README_MSWIN32.txt

@@ -1,39 +0,0 @@
-Copyright (c) 2005, Christopher Kleckner
-All rights reserved
-
-This file is part of the Rio library for ruby.
-
-Rio is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-Rio is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with Rio; if not, write to the Free Software
-Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-
-<b>Rio is pre-alpha software. 
-The documented interface and behavior is subject to change without notice.</b>
-
-Currently support for MSWin paths involves simply ignoring the drive portion (C: etc)
-of paths returned by by the underlying ruby libraries (that's right, it just
-lopps that sob right off) While this is clearly unacceptable behavior, it is unclear
-to the author whether support for paths that can not be represented per RFC1738 is
-a feature of interest to anyone.
-
-There is a relatively small amount of code that would have to change to add this
-support in the future, and such support may be included in a future release.
-
-For the time being, the subset of tests in 'test/mswin32.rb' do pass when running 
-under the mswin32 port of ruby. By far the majority of the tests that are excluded
-are excluded because they use symlinks, not because of the differences in path
-representations.
-
-
-

data/ex/colx.rb

@@ -1,8 +0,0 @@
-#!/usr/bin/env ruby
-require 'rio'
-
-RGBFILE = rio(__FILE__).dirname/'rgb.txt.gz'
-
-RGBFILE.gzip.lines(/^\s*(\d+)\s+(\d+)\s+(\d+)\s+(\S.+)/) do |line,ma| 
-  printf("#%02x%02x%02x\t%s\n",*ma[1..4])
-end

data/ex/findinruby

@@ -1,23 +0,0 @@
-#!/usr/bin/env ruby
-
-require 'rio'
-require 'rio/argv'
-
-re = ARGV.shift
-
-is_ruby_exe = proc{ |f| f.executable? and f[0][0] =~ /^#!.+ruby/ }
-
-RIO.ARGV.each do |rpath|
-  rpath.norecurse('.svn','pkg').files('*.rb',is_ruby_exe) do |f|
-    print f.lines[/#{re}/].map{ |line| "#{f}: #{line}" }
-  end
-
-end
-__END__
-
-ARGV.each do |path|
-  rio(path).norecurse('.svn','pkg').files('*.rb',proc{ |f| f.executable? and f[0] =~ /^#!.+ruby/ }) do |f|
-    print f.lines[/#{re}/].map{ |line| "#{f}: #{line}" }
-  end
-end
-

data/ex/findruby

@@ -1,15 +0,0 @@
-#!/usr/bin/env ruby
-
-require 'rio'
-require 'rio/argv'
-
-#is_ruby_exe = proc{ |f| f.executable? and f[0][0] =~ /^#!.+ruby/ }
-is_ruby_exe = proc{ |f| f.executable? and f.gets =~ /^#!.+ruby/ }
-
-RIO.ARGV.each do |rpath|
-  rpath.norecurse('.svn','pkg').files('*.rb',is_ruby_exe) do |f|
-    puts f
-  end
-end
-
-__END__

data/ex/passwd_report.rb

@@ -1,8 +0,0 @@
-#!/usr/local/bin/ruby
-require 'rio'
-
-# Create a tab separated file of accounts in a UNIX passwd file,
-# listing only the username, uid, and realname fields
-
-rio('/etc/passwd').csv(':').columns(0,2,4) > rio(?-).csv("\t")
-

data/ex/prompt.rb

@@ -1,25 +0,0 @@
-#!/usr/bin/ruby
-
-require 'rio'
-
-ans = rio(?-).chomp.print("Type Something: ").gets
-rio(?-).puts("You typed '#{ans}'")
-
-# Could also be written like this
-#
-#stdio = rio(?-).chomp
-#ans = stdio.print("Type Something: ").gets
-#stdio.puts("You typed '#{ans}'")
-#
-# Or even this
-#
-#stdio = rio(?-).chomp
-#stdio.puts("You typed '#{stdio.print("Type Something: ").gets}'")
-#
-# Or this
-#
-#rio(?-).puts("You typed '#{rio(?-).chomp.print("Type Something: ").gets}'")
-#
-
-
-__END__

data/ex/riocat

@@ -1,35 +0,0 @@
-#!/usr/bin/env ruby
-require 'rio'
-# riogzip: reads from stdin, gzips and writes it to stdout
-# example use:
-#   riocat < afile.txt >bfile.txt
-# 
-# explanation:
-#
-# rio(?-)
-#   rio(?-): a rio that will be connected to stdin or stdout depending how it is used
-#
-# rio(?-)
-#   rio(?-): a rio that will be connected to stdin or stdout depending how it is used
-#
-# <
-#   <: copy operator indicating rio on left is written to and the rio on the right is read from
-#
-rio(?-) < rio(?-)
-
-#
-# this could also be written
-# rio(?-) > rio(?-)
-#
-# this is similar but reads the entire file before writing
-#rio(?-).print!( rio(?-).slurp )
-
-
-
-#rio(?-).print!( rio(?-).slurp)
-
-
-# DONT TO THIS:
-#io = rio(?-)
-#io.print!( io.slurp )
-

data/ex/riogunzip

@@ -1,31 +0,0 @@
-#!/usr/bin/env ruby
-require 'rio'
-# riogzip: reads from stdin, gzips and writes it to stdout
-# example use:
-#   riogunzip < afile.txt.gz
-# 
-# explanation:
-#
-# rio(?-).gzip
-#   rio(?-): a rio that will be connected to stdin or stdout depending how it is used
-#   .gzip: filter the input or output through Zlib:Gzip[Reader or Writer]
-#
-# rio(?-)
-#   rio(?-): a rio that will be connected to stdin or stdout depending how it is used
-#
-# <
-#   rio copy operator indicating the direction of data
-#   pointed in this direction the rio on the right is read from and the one on the left is
-#   written. (or stdin and stdout respectively)
-#
-rio(?-).gzip > rio(?-)
-
-# could be written this way
-# rio(?-) < rio(?-).gzip
-#
-# this is similar, but reads the entire file in before writing it out
-#    rio(?-).print!( rio(?-).gzip.contents )
-#
-#rio(?-).gzip.each_record do |rec|
-#  rio(?-).print(rec)
-#end

data/ex/riogzip

@@ -1,24 +0,0 @@
-#!/usr/bin/env ruby
-require 'rio'
-# riogzip: reads from stdin, gzips and writes it to stdout
-# example use:
-#   riogzip < afile.txt > afile.txt.gz
-# 
-# explanation:
-#
-# rio(?-).gzip
-#   rio(?-): a rio that will be connected to stdin or stdout depending how it is used
-#   .gzip: filter the input or output through Zlib:Gzip[Reader or Writer]
-#
-# rio(?-)
-#   rio(?-): a rio that will be connected to stdin or stdout depending how it is used
-#
-# <
-# rio copy operator indicating the direction of data
-
-rio(?-).gzip < rio(?-)
-
-# 
-# could also be written:
-# rio(?-) > rio(?-).gzip
-# 

data/ex/rioprompt.rb

@@ -1,6 +0,0 @@
-#!/usr/local/bin/ruby
-
-require 'rio/prompt'
-
-ans = RIO.prompt("Name: ")
-puts "You typed '#{ans}'"

data/ex/tolf

@@ -1,11 +0,0 @@
-#!/usr/bin/env ruby
-
-require 'rio'
-
-ARGV.each do |path|
-  tmp = rio(?$)
-  tmp < rio(path).chomp.map { |l| "#{l}\n" }
-  tmp > rio(path)
-end
-
-__END__

data/test/mswin32.rb

@@ -1,28 +0,0 @@
-require 'rio'
-require 'test/unit'
-require 'tc/create'
-require 'tc/methods'
-require 'tc/abs'
-require 'tc/closeoneof'
-require 'tc/copy'
-require 'tc/copydest'
-require 'tc/copylines'
-require 'tc/dirent'
-require 'tc/each'
-require 'tc/entary'
-require 'tc/eq'
-require 'tc/getrec'
-require 'tc/lines'
-require 'tc/misc'
-require 'tc/pa'
-require 'tc/paths'
-require 'tc/qae'
-require 'tc/skiplines'
-require 'tc/records'
-require 'tc/expand_path'
-require 'tc/clearsel'
-require 'tc/csv'
-require 'tc/dir'
-
-
-require 'test/unit/ui/console/testrunner'