rich_cms 2.1.7 → 3.0.0

data/test/rails-3/dummy/config/initializers/devise.rb

@@ -0,0 +1,142 @@
+# Use this hook to configure devise mailer, warden hooks and so forth. The first
+# four configuration values can also be set straight in your models.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in DeviseMailer.
+  config.mailer_sender = "noreply@codehero.es"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require "devise/orm/active_record"
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating an user. By default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating an user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # config.authentication_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. True by default.
+  # config.http_authenticatable = true
+
+  # Set this to true to use Basic Auth for AJAX requests.  True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication
+  config.http_authentication_realm = "Rich-CMS"
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  config.stretches = 10
+
+  # Define which will be the encryption algorithm. Devise also supports encryptors
+  # from others authentication tools as :clearance_sha1, :authlogic_sha512 (then
+  # you should set stretches above to 20 for default behavior) and :restful_authentication_sha1
+  # (then you should set stretches to 10, and copy REST_AUTH_SITE_KEY to pepper)
+  config.encryptor = :bcrypt
+
+  # Setup a pepper to generate the encrypted password.
+  config.pepper = "b57fdc3ba6288df70ca46cf2f7a6c168408e2fd602a185deda0340db3f1b4427d7c02e94880ec3786a26c248ff40b12f4e39d3315bb7ddf5541b9efb27ecd8f7"
+
+  # ==> Configuration for :confirmable
+  # The time you want to give your user to confirm his account. During this time
+  # he will be able to access your application without confirming. Default is nil.
+  # When confirm_within is zero, the user won't be able to sign in without confirming.
+  # You can use this to let your user access some features of your application
+  # without confirming the account, but blocking it after a certain period
+  # (ie 2 days).
+  # config.confirm_within = 2.days
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, a valid remember token can be re-used between multiple browsers.
+  # config.remember_across_browsers = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # ==> Configuration for :validatable
+  # Range for password length
+  # config.password_length = 6..20
+
+  # Regex to use to validate the email address
+  # config.email_regexp = /^([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})$/i
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again.
+  # config.timeout_in = 10.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = true
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes.
+  # config.default_scope = :user
+
+  # Configure sign_out behavior.
+  # By default sign_out is scoped (i.e. /users/sign_out affects only :user scope).
+  # In case of sign_out_all_scopes set to true any logout action will sign out all active scopes.
+  # config.sign_out_all_scopes = false
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists. Default is [:html]
+  # config.navigational_formats = [:html, :iphone]
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not (yet) supported by Devise,
+  # you can configure them inside the config.warden block. The example below
+  # allows you to setup OAuth, using http://github.com/roman/warden_oauth
+  #
+  # config.warden do |manager|
+  #   manager.oauth(:twitter) do |twitter|
+  #     twitter.consumer_secret = <YOUR CONSUMER SECRET>
+  #     twitter.consumer_key  = <YOUR CONSUMER KEY>
+  #     twitter.options :site => 'http://twitter.com'
+  #   end
+  #   manager.default_strategies(:scope => :user).unshift :twitter_oauth
+  # end
+end

data/test/rails-3/dummy/config/initializers/enrichments.rb

@@ -0,0 +1,5 @@
+Rich::Cms::Auth.setup do |config|
+  config.logic = :devise
+  config.klass = "DeviseUser"
+end
+Rich::Cms::Engine.register(".cms_content", {:class_name => "CmsContent"})

data/test/rails-3/dummy/config/initializers/inflections.rb

@@ -0,0 +1,10 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format
+# (all these examples are active by default):
+# ActiveSupport::Inflector.inflections do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end

data/test/rails-3/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf
+# Mime::Type.register_alias "text/html", :iphone

data/test/rails-3/dummy/config/initializers/secret_token.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+Dummy::Application.config.secret_token = 'b5859a66378e11f96d739eaad19be3c0a0a0653d51ef983add99dd3495a8891f874514540109da440cfa407ddfd19b791f14dcf472357e1373758d426dcb042f'

data/test/rails-3/dummy/config/initializers/session_store.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+Dummy::Application.config.session_store :cookie_store, :key => '_dummy_session'
+
+# Use the database for sessions instead of the cookie-based default,
+# which shouldn't be used to store highly confidential information
+# (create the session table with "rails generate session_migration")
+# Dummy::Application.config.session_store :active_record_store

data/test/rails-3/dummy/config/locales/en.yml

@@ -0,0 +1,5 @@
+# Sample localization file for English. Add more files in this directory for other locales.
+# See http://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
+
+en:
+  hello: "Hello world"

data/test/rails-3/dummy/config/routes.rb

@@ -0,0 +1,59 @@
+Dummy::Application.routes.draw do
+  devise_for :devise_users
+  # The priority is based upon order of creation:
+  # first created -> highest priority.
+
+  # Sample of regular route:
+  #   match 'products/:id' => 'catalog#view'
+  # Keep in mind you can assign values other than :controller and :action
+
+  # Sample of named route:
+  #   match 'products/:id/purchase' => 'catalog#purchase', :as => :purchase
+  # This route can be invoked with purchase_url(:id => product.id)
+
+  # Sample resource route (maps HTTP verbs to controller actions automatically):
+  #   resources :products
+
+  # Sample resource route with options:
+  #   resources :products do
+  #     member do
+  #       get 'short'
+  #       post 'toggle'
+  #     end
+  #
+  #     collection do
+  #       get 'sold'
+  #     end
+  #   end
+
+  # Sample resource route with sub-resources:
+  #   resources :products do
+  #     resources :comments, :sales
+  #     resource :seller
+  #   end
+
+  # Sample resource route with more complex sub-resources
+  #   resources :products do
+  #     resources :comments
+  #     resources :sales do
+  #       get 'recent', :on => :collection
+  #     end
+  #   end
+
+  # Sample resource route within a namespace:
+  #   namespace :admin do
+  #     # Directs /admin/products/* to Admin::ProductsController
+  #     # (app/controllers/admin/products_controller.rb)
+  #     resources :products
+  #   end
+
+  # You can have the root of your site routed with "root"
+  # just remember to delete public/index.html.
+  root :to => "application#index"
+
+  # See how all your routes lay out with "rake routes"
+
+  # This is a legacy wild controller route that's not recommended for RESTful applications.
+  # Note: This route will make all actions in every controller accessible via GET requests.
+  # match ':controller(/:action(/:id(.:format)))'
+end

data/test/rails-3/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment',  __FILE__)
+run Dummy::Application

data/test/rails-3/dummy/db/schema.rb

@@ -0,0 +1,49 @@
+ActiveRecord::Schema.define(:version => 19820801180828) do
+
+  create_table "authlogic_users", :force => true do |t|
+    t.string   "name"
+    t.string   "email"
+    t.string   "crypted_password"
+    t.string   "password_salt"
+    t.string   "persistence_token"
+    t.string   "single_access_token"
+    t.string   "perishable_token"
+    t.integer  "login_count"
+    t.datetime "created_at"
+    t.datetime "updated_at"
+    t.datetime "current_login_at"
+    t.datetime "last_login_at"
+    t.datetime "last_request_at"
+  end
+
+  add_index "authlogic_users", ["email"], :name => "index_authlogic_users_on_email"
+
+  create_table "devise_users", :force => true do |t|
+    t.string   "email",                               :default => "", :null => false
+    t.string   "encrypted_password",   :limit => 128, :default => "", :null => false
+    t.string   "password_salt",                       :default => "", :null => false
+    t.string   "reset_password_token"
+    t.string   "remember_token"
+    t.datetime "remember_created_at"
+    t.integer  "sign_in_count",                       :default => 0
+    t.datetime "current_sign_in_at"
+    t.datetime "last_sign_in_at"
+    t.string   "current_sign_in_ip"
+    t.string   "last_sign_in_ip"
+    t.datetime "created_at"
+    t.datetime "updated_at"
+  end
+
+  add_index "devise_users", ["email"], :name => "index_devise_users_on_email", :unique => true
+  add_index "devise_users", ["reset_password_token"], :name => "index_devise_users_on_reset_password_token", :unique => true
+
+  create_table "cms_contents", :force => true do |t|
+    t.string   "key"
+    t.text     "value"
+    t.datetime "created_at"
+    t.datetime "updated_at"
+  end
+
+  add_index "cms_contents", ["key"], :name => "index_cms_contents_on_key"
+
+end

data/test/rails-3/dummy/db/seeds.rb

@@ -0,0 +1,10 @@
+# This file should contain all the record creation needed to seed the database with its default values.
+# The data can then be loaded with the rake db:seed (or created alongside the db with db:setup).
+#
+# Examples:
+#
+#   cities = City.create([{ :name => 'Chicago' }, { :name => 'Copenhagen' }])
+#   Major.create(:name => 'Daley', :city => cities.first)
+
+AuthlogicUser.create :email => "paul.engel@holder.nl", :password => "testrichcms", :password_confirmation => "testrichcms"
+DeviseUser   .create :email => "paul.engel@holder.nl", :password => "testrichcms"

data/test/rails-3/dummy/public/404.html

@@ -0,0 +1,26 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The page you were looking for doesn't exist (404)</title>
+  <style type="text/css">
+    body { background-color: #fff; color: #666; text-align: center; font-family: arial, sans-serif; }
+    div.dialog {
+      width: 25em;
+      padding: 0 4em;
+      margin: 4em auto 0 auto;
+      border: 1px solid #ccc;
+      border-right-color: #999;
+      border-bottom-color: #999;
+    }
+    h1 { font-size: 100%; color: #f00; line-height: 1.5em; }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/404.html -->
+  <div class="dialog">
+    <h1>The page you were looking for doesn't exist.</h1>
+    <p>You may have mistyped the address or the page may have moved.</p>
+  </div>
+</body>
+</html>

data/test/rails-3/dummy/public/422.html

@@ -0,0 +1,26 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The change you wanted was rejected (422)</title>
+  <style type="text/css">
+    body { background-color: #fff; color: #666; text-align: center; font-family: arial, sans-serif; }
+    div.dialog {
+      width: 25em;
+      padding: 0 4em;
+      margin: 4em auto 0 auto;
+      border: 1px solid #ccc;
+      border-right-color: #999;
+      border-bottom-color: #999;
+    }
+    h1 { font-size: 100%; color: #f00; line-height: 1.5em; }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/422.html -->
+  <div class="dialog">
+    <h1>The change you wanted was rejected.</h1>
+    <p>Maybe you tried to change something you didn't have access to.</p>
+  </div>
+</body>
+</html>

data/test/rails-3/dummy/public/500.html

@@ -0,0 +1,26 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>We're sorry, but something went wrong (500)</title>
+  <style type="text/css">
+    body { background-color: #fff; color: #666; text-align: center; font-family: arial, sans-serif; }
+    div.dialog {
+      width: 25em;
+      padding: 0 4em;
+      margin: 4em auto 0 auto;
+      border: 1px solid #ccc;
+      border-right-color: #999;
+      border-bottom-color: #999;
+    }
+    h1 { font-size: 100%; color: #f00; line-height: 1.5em; }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/500.html -->
+  <div class="dialog">
+    <h1>We're sorry, but something went wrong.</h1>
+    <p>We've been notified about this issue and we'll take a look at it shortly.</p>
+  </div>
+</body>
+</html>