ric 0.12.0 → 0.12.2

data/vendor/bundle/ruby/2.5.0/gems/concurrent-ruby-1.1.5/lib/concurrent/thread_safe/util/striped64.rb

@@ -0,0 +1,246 @@
+require 'concurrent/thread_safe/util'
+require 'concurrent/thread_safe/util/power_of_two_tuple'
+require 'concurrent/thread_safe/util/volatile'
+require 'concurrent/thread_safe/util/xor_shift_random'
+
+module Concurrent
+
+  # @!visibility private
+  module ThreadSafe
+
+    # @!visibility private
+    module Util
+
+      # A Ruby port of the Doug Lea's jsr166e.Striped64 class version 1.6
+      # available in public domain.
+      #
+      # Original source code available here:
+      # http://gee.cs.oswego.edu/cgi-bin/viewcvs.cgi/jsr166/src/jsr166e/Striped64.java?revision=1.6
+      #
+      # Class holding common representation and mechanics for classes supporting
+      # dynamic striping on 64bit values.
+      #
+      # This class maintains a lazily-initialized table of atomically updated
+      # variables, plus an extra +base+ field. The table size is a power of two.
+      # Indexing uses masked per-thread hash codes. Nearly all methods on this
+      # class are private, accessed directly by subclasses.
+      #
+      # Table entries are of class +Cell+; a variant of AtomicLong padded to
+      # reduce cache contention on most processors. Padding is overkill for most
+      # Atomics because they are usually irregularly scattered in memory and thus
+      # don't interfere much with each other. But Atomic objects residing in
+      # arrays will tend to be placed adjacent to each other, and so will most
+      # often share cache lines (with a huge negative performance impact) without
+      # this precaution.
+      #
+      # In part because +Cell+s are relatively large, we avoid creating them until
+      # they are needed. When there is no contention, all updates are made to the
+      # +base+ field. Upon first contention (a failed CAS on +base+ update), the
+      # table is initialized to size 2. The table size is doubled upon further
+      # contention until reaching the nearest power of two greater than or equal
+      # to the number of CPUS. Table slots remain empty (+nil+) until they are
+      # needed.
+      #
+      # A single spinlock (+busy+) is used for initializing and resizing the
+      # table, as well as populating slots with new +Cell+s. There is no need for
+      # a blocking lock: When the lock is not available, threads try other slots
+      # (or the base). During these retries, there is increased contention and
+      # reduced locality, which is still better than alternatives.
+      #
+      # Per-thread hash codes are initialized to random values. Contention and/or
+      # table collisions are indicated by failed CASes when performing an update
+      # operation (see method +retry_update+). Upon a collision, if the table size
+      # is less than the capacity, it is doubled in size unless some other thread
+      # holds the lock. If a hashed slot is empty, and lock is available, a new
+      # +Cell+ is created. Otherwise, if the slot exists, a CAS is tried. Retries
+      # proceed by "double hashing", using a secondary hash (XorShift) to try to
+      # find a free slot.
+      #
+      # The table size is capped because, when there are more threads than CPUs,
+      # supposing that each thread were bound to a CPU, there would exist a
+      # perfect hash function mapping threads to slots that eliminates collisions.
+      # When we reach capacity, we search for this mapping by randomly varying the
+      # hash codes of colliding threads. Because search is random, and collisions
+      # only become known via CAS failures, convergence can be slow, and because
+      # threads are typically not bound to CPUS forever, may not occur at all.
+      # However, despite these limitations, observed contention rates are
+      # typically low in these cases.
+      #
+      # It is possible for a +Cell+ to become unused when threads that once hashed
+      # to it terminate, as well as in the case where doubling the table causes no
+      # thread to hash to it under expanded mask. We do not try to detect or
+      # remove such cells, under the assumption that for long-running instances,
+      # observed contention levels will recur, so the cells will eventually be
+      # needed again; and for short-lived ones, it does not matter.
+      #
+      # @!visibility private
+      class Striped64
+
+        # Padded variant of AtomicLong supporting only raw accesses plus CAS.
+        # The +value+ field is placed between pads, hoping that the JVM doesn't
+        # reorder them.
+        #
+        # Optimisation note: It would be possible to use a release-only
+        # form of CAS here, if it were provided.
+        #
+        # @!visibility private
+        class Cell < Concurrent::AtomicReference
+
+          alias_method :cas, :compare_and_set
+
+          def cas_computed
+            cas(current_value = value, yield(current_value))
+          end
+
+          # @!visibility private
+          def self.padding
+            # TODO: this only adds padding after the :value slot, need to find a way to add padding before the slot
+            # TODO (pitr-ch 28-Jul-2018): the padding instance vars may not be created
+            # hide from yardoc in a method
+            attr_reader *(12.times.collect{ |i| "padding_#{i}".to_sym })
+          end
+          padding
+        end
+
+        extend Volatile
+        attr_volatile :cells, # Table of cells. When non-null, size is a power of 2.
+          :base,  # Base value, used mainly when there is no contention, but also as a fallback during table initialization races. Updated via CAS.
+          :busy   # Spinlock (locked via CAS) used when resizing and/or creating Cells.
+
+        alias_method :busy?, :busy
+
+        def initialize
+          super()
+          self.busy = false
+          self.base = 0
+        end
+
+        # Handles cases of updates involving initialization, resizing,
+        # creating new Cells, and/or contention. See above for
+        # explanation. This method suffers the usual non-modularity
+        # problems of optimistic retry code, relying on rechecked sets of
+        # reads.
+        #
+        # Arguments:
+        # [+x+]
+        #   the value
+        # [+hash_code+]
+        #   hash code used
+        # [+x+]
+        #   false if CAS failed before call
+        def retry_update(x, hash_code, was_uncontended) # :yields: current_value
+          hash     = hash_code
+          collided = false # True if last slot nonempty
+          while true
+            if current_cells = cells
+              if !(cell = current_cells.volatile_get_by_hash(hash))
+                if busy?
+                  collided = false
+                else # Try to attach new Cell
+                  if try_to_install_new_cell(Cell.new(x), hash) # Optimistically create and try to insert new cell
+                    break
+                  else
+                    redo # Slot is now non-empty
+                  end
+                end
+              elsif !was_uncontended # CAS already known to fail
+                was_uncontended = true # Continue after rehash
+              elsif cell.cas_computed {|current_value| yield current_value}
+                break
+              elsif current_cells.size >= CPU_COUNT || cells != current_cells # At max size or stale
+                collided = false
+              elsif collided && expand_table_unless_stale(current_cells)
+                collided = false
+                redo # Retry with expanded table
+              else
+                collided = true
+              end
+              hash = XorShiftRandom.xorshift(hash)
+
+            elsif try_initialize_cells(x, hash) || cas_base_computed {|current_base| yield current_base}
+              break
+            end
+          end
+          self.hash_code = hash
+        end
+
+        private
+        # Static per-thread hash code key. Shared across all instances to
+        # reduce Thread locals pollution and because adjustments due to
+        # collisions in one table are likely to be appropriate for
+        # others.
+        THREAD_LOCAL_KEY = "#{name}.hash_code".to_sym
+
+        # A thread-local hash code accessor. The code is initially
+        # random, but may be set to a different value upon collisions.
+        def hash_code
+          Thread.current[THREAD_LOCAL_KEY] ||= XorShiftRandom.get
+        end
+
+        def hash_code=(hash)
+          Thread.current[THREAD_LOCAL_KEY] = hash
+        end
+
+        # Sets base and all +cells+ to the given value.
+        def internal_reset(initial_value)
+          current_cells = cells
+          self.base     = initial_value
+          if current_cells
+            current_cells.each do |cell|
+              cell.value = initial_value if cell
+            end
+          end
+        end
+
+        def cas_base_computed
+          cas_base(current_base = base, yield(current_base))
+        end
+
+        def free?
+          !busy?
+        end
+
+        def try_initialize_cells(x, hash)
+          if free? && !cells
+            try_in_busy do
+              unless cells # Recheck under lock
+                new_cells = PowerOfTwoTuple.new(2)
+                new_cells.volatile_set_by_hash(hash, Cell.new(x))
+                self.cells = new_cells
+              end
+            end
+          end
+        end
+
+        def expand_table_unless_stale(current_cells)
+          try_in_busy do
+            if current_cells == cells # Recheck under lock
+              new_cells = current_cells.next_in_size_table
+              current_cells.each_with_index {|x, i| new_cells.volatile_set(i, x)}
+              self.cells = new_cells
+            end
+          end
+        end
+
+        def try_to_install_new_cell(new_cell, hash)
+          try_in_busy do
+            # Recheck under lock
+            if (current_cells = cells) && !current_cells.volatile_get(i = current_cells.hash_to_index(hash))
+              current_cells.volatile_set(i, new_cell)
+            end
+          end
+        end
+
+        def try_in_busy
+          if cas_busy(false, true)
+            begin
+              yield
+            ensure
+              self.busy = false
+            end
+          end
+        end
+      end
+    end
+  end
+end

data/vendor/bundle/ruby/2.5.0/gems/concurrent-ruby-1.1.5/lib/concurrent/thread_safe/util/volatile.rb

@@ -0,0 +1,75 @@
+require 'concurrent/thread_safe/util'
+
+module Concurrent
+
+  # @!visibility private
+  module ThreadSafe
+
+    # @!visibility private
+    module Util
+      
+      # @!visibility private
+      module Volatile
+
+        # Provides +volatile+ (in the JVM's sense) attribute accessors implemented
+        # atop of +Concurrent::AtomicReference+.
+        #
+        # Usage:
+        #   class Foo
+        #     extend Concurrent::ThreadSafe::Util::Volatile
+        #     attr_volatile :foo, :bar
+        #
+        #     def initialize(bar)
+        #       super() # must super() into parent initializers before using the volatile attribute accessors
+        #       self.bar = bar
+        #     end
+        #
+        #     def hello
+        #       my_foo = foo # volatile read
+        #       self.foo = 1 # volatile write
+        #       cas_foo(1, 2) # => true | a strong CAS
+        #     end
+        #   end
+        def attr_volatile(*attr_names)
+          return if attr_names.empty?
+          include(Module.new do
+            atomic_ref_setup = attr_names.map {|attr_name| "@__#{attr_name} = Concurrent::AtomicReference.new"}
+            initialize_copy_setup = attr_names.zip(atomic_ref_setup).map do |attr_name, ref_setup|
+              "#{ref_setup}(other.instance_variable_get(:@__#{attr_name}).get)"
+            end
+            class_eval <<-RUBY_EVAL, __FILE__, __LINE__ + 1
+            def initialize(*)
+              super
+            #{atomic_ref_setup.join('; ')}
+            end
+
+            def initialize_copy(other)
+              super
+            #{initialize_copy_setup.join('; ')}
+            end
+            RUBY_EVAL
+
+            attr_names.each do |attr_name|
+              class_eval <<-RUBY_EVAL, __FILE__, __LINE__ + 1
+              def #{attr_name}
+                @__#{attr_name}.get
+              end
+
+              def #{attr_name}=(value)
+                @__#{attr_name}.set(value)
+              end
+
+              def compare_and_set_#{attr_name}(old_value, new_value)
+                @__#{attr_name}.compare_and_set(old_value, new_value)
+              end
+              RUBY_EVAL
+
+              alias_method :"cas_#{attr_name}", :"compare_and_set_#{attr_name}"
+              alias_method :"lazy_set_#{attr_name}", :"#{attr_name}="
+            end
+          end)
+        end
+      end
+    end
+  end
+end

data/vendor/bundle/ruby/2.5.0/gems/concurrent-ruby-1.1.5/lib/concurrent/thread_safe/util/xor_shift_random.rb

@@ -0,0 +1,50 @@
+require 'concurrent/thread_safe/util'
+
+module Concurrent
+
+  # @!visibility private
+  module ThreadSafe
+
+    # @!visibility private
+    module Util
+
+      # A xorshift random number (positive +Fixnum+s) generator, provides
+      # reasonably cheap way to generate thread local random numbers without
+      # contending for the global +Kernel.rand+.
+      #
+      # Usage:
+      #   x = XorShiftRandom.get # uses Kernel.rand to generate an initial seed
+      #   while true
+      #     if (x = XorShiftRandom.xorshift).odd? # thread-localy generate a next random number
+      #       do_something_at_random
+      #     end
+      #   end
+      module XorShiftRandom
+        extend self
+        MAX_XOR_SHIFTABLE_INT = MAX_INT - 1
+
+        # Generates an initial non-zero positive +Fixnum+ via +Kernel.rand+.
+        def get
+          Kernel.rand(MAX_XOR_SHIFTABLE_INT) + 1 # 0 can't be xorshifted
+        end
+
+        # xorshift based on: http://www.jstatsoft.org/v08/i14/paper
+        if 0.size == 4
+          # using the "yˆ=y>>a; yˆ=y<<b; yˆ=y>>c;" transform with the (a,b,c) tuple with values (3,1,14) to minimise Bignum overflows
+          def xorshift(x)
+            x ^= x >> 3
+            x ^= (x << 1) & MAX_INT # cut-off Bignum overflow
+            x ^= x >> 14
+          end
+        else
+          # using the "yˆ=y>>a; yˆ=y<<b; yˆ=y>>c;" transform with the (a,b,c) tuple with values (1,1,54) to minimise Bignum overflows
+          def xorshift(x)
+            x ^= x >> 1
+            x ^= (x << 1) & MAX_INT # cut-off Bignum overflow
+            x ^= x >> 54
+          end
+        end
+      end
+    end
+  end
+end

data/vendor/bundle/ruby/2.5.0/gems/concurrent-ruby-1.1.5/lib/concurrent/timer_task.rb

@@ -0,0 +1,334 @@
+require 'concurrent/collection/copy_on_notify_observer_set'
+require 'concurrent/concern/dereferenceable'
+require 'concurrent/concern/observable'
+require 'concurrent/atomic/atomic_boolean'
+require 'concurrent/executor/executor_service'
+require 'concurrent/executor/ruby_executor_service'
+require 'concurrent/executor/safe_task_executor'
+require 'concurrent/scheduled_task'
+
+module Concurrent
+
+  # A very common concurrency pattern is to run a thread that performs a task at
+  # regular intervals. The thread that performs the task sleeps for the given
+  # interval then wakes up and performs the task. Lather, rinse, repeat... This
+  # pattern causes two problems. First, it is difficult to test the business
+  # logic of the task because the task itself is tightly coupled with the
+  # concurrency logic. Second, an exception raised while performing the task can
+  # cause the entire thread to abend. In a long-running application where the
+  # task thread is intended to run for days/weeks/years a crashed task thread
+  # can pose a significant problem. `TimerTask` alleviates both problems.
+  #
+  # When a `TimerTask` is launched it starts a thread for monitoring the
+  # execution interval. The `TimerTask` thread does not perform the task,
+  # however. Instead, the TimerTask launches the task on a separate thread.
+  # Should the task experience an unrecoverable crash only the task thread will
+  # crash. This makes the `TimerTask` very fault tolerant. Additionally, the
+  # `TimerTask` thread can respond to the success or failure of the task,
+  # performing logging or ancillary operations. `TimerTask` can also be
+  # configured with a timeout value allowing it to kill a task that runs too
+  # long.
+  #
+  # One other advantage of `TimerTask` is that it forces the business logic to
+  # be completely decoupled from the concurrency logic. The business logic can
+  # be tested separately then passed to the `TimerTask` for scheduling and
+  # running.
+  #
+  # In some cases it may be necessary for a `TimerTask` to affect its own
+  # execution cycle. To facilitate this, a reference to the TimerTask instance
+  # is passed as an argument to the provided block every time the task is
+  # executed.
+  #
+  # The `TimerTask` class includes the `Dereferenceable` mixin module so the
+  # result of the last execution is always available via the `#value` method.
+  # Dereferencing options can be passed to the `TimerTask` during construction or
+  # at any later time using the `#set_deref_options` method.
+  #
+  # `TimerTask` supports notification through the Ruby standard library
+  # {http://ruby-doc.org/stdlib-2.0/libdoc/observer/rdoc/Observable.html
+  # Observable} module. On execution the `TimerTask` will notify the observers
+  # with three arguments: time of execution, the result of the block (or nil on
+  # failure), and any raised exceptions (or nil on success). If the timeout
+  # interval is exceeded the observer will receive a `Concurrent::TimeoutError`
+  # object as the third argument.
+  #
+  # @!macro copy_options
+  #
+  # @example Basic usage
+  #   task = Concurrent::TimerTask.new{ puts 'Boom!' }
+  #   task.execute
+  #
+  #   task.execution_interval #=> 60 (default)
+  #   task.timeout_interval   #=> 30 (default)
+  #
+  #   # wait 60 seconds...
+  #   #=> 'Boom!'
+  #
+  #   task.shutdown #=> true
+  #
+  # @example Configuring `:execution_interval` and `:timeout_interval`
+  #   task = Concurrent::TimerTask.new(execution_interval: 5, timeout_interval: 5) do
+  #          puts 'Boom!'
+  #        end
+  #
+  #   task.execution_interval #=> 5
+  #   task.timeout_interval   #=> 5
+  #
+  # @example Immediate execution with `:run_now`
+  #   task = Concurrent::TimerTask.new(run_now: true){ puts 'Boom!' }
+  #   task.execute
+  #
+  #   #=> 'Boom!'
+  #
+  # @example Last `#value` and `Dereferenceable` mixin
+  #   task = Concurrent::TimerTask.new(
+  #     dup_on_deref: true,
+  #     execution_interval: 5
+  #   ){ Time.now }
+  #
+  #   task.execute
+  #   Time.now   #=> 2013-11-07 18:06:50 -0500
+  #   sleep(10)
+  #   task.value #=> 2013-11-07 18:06:55 -0500
+  #
+  # @example Controlling execution from within the block
+  #   timer_task = Concurrent::TimerTask.new(execution_interval: 1) do |task|
+  #     task.execution_interval.times{ print 'Boom! ' }
+  #     print "\n"
+  #     task.execution_interval += 1
+  #     if task.execution_interval > 5
+  #       puts 'Stopping...'
+  #       task.shutdown
+  #     end
+  #   end
+  #
+  #   timer_task.execute # blocking call - this task will stop itself
+  #   #=> Boom!
+  #   #=> Boom! Boom!
+  #   #=> Boom! Boom! Boom!
+  #   #=> Boom! Boom! Boom! Boom!
+  #   #=> Boom! Boom! Boom! Boom! Boom!
+  #   #=> Stopping...
+  #
+  # @example Observation
+  #   class TaskObserver
+  #     def update(time, result, ex)
+  #       if result
+  #         print "(#{time}) Execution successfully returned #{result}\n"
+  #       elsif ex.is_a?(Concurrent::TimeoutError)
+  #         print "(#{time}) Execution timed out\n"
+  #       else
+  #         print "(#{time}) Execution failed with error #{ex}\n"
+  #       end
+  #     end
+  #   end
+  #
+  #   task = Concurrent::TimerTask.new(execution_interval: 1, timeout_interval: 1){ 42 }
+  #   task.add_observer(TaskObserver.new)
+  #   task.execute
+  #   sleep 4
+  #
+  #   #=> (2013-10-13 19:08:58 -0400) Execution successfully returned 42
+  #   #=> (2013-10-13 19:08:59 -0400) Execution successfully returned 42
+  #   #=> (2013-10-13 19:09:00 -0400) Execution successfully returned 42
+  #   task.shutdown
+  #
+  #   task = Concurrent::TimerTask.new(execution_interval: 1, timeout_interval: 1){ sleep }
+  #   task.add_observer(TaskObserver.new)
+  #   task.execute
+  #
+  #   #=> (2013-10-13 19:07:25 -0400) Execution timed out
+  #   #=> (2013-10-13 19:07:27 -0400) Execution timed out
+  #   #=> (2013-10-13 19:07:29 -0400) Execution timed out
+  #   task.shutdown
+  #
+  #   task = Concurrent::TimerTask.new(execution_interval: 1){ raise StandardError }
+  #   task.add_observer(TaskObserver.new)
+  #   task.execute
+  #
+  #   #=> (2013-10-13 19:09:37 -0400) Execution failed with error StandardError
+  #   #=> (2013-10-13 19:09:38 -0400) Execution failed with error StandardError
+  #   #=> (2013-10-13 19:09:39 -0400) Execution failed with error StandardError
+  #   task.shutdown
+  #
+  # @see http://ruby-doc.org/stdlib-2.0/libdoc/observer/rdoc/Observable.html
+  # @see http://docs.oracle.com/javase/7/docs/api/java/util/TimerTask.html
+  class TimerTask < RubyExecutorService
+    include Concern::Dereferenceable
+    include Concern::Observable
+
+    # Default `:execution_interval` in seconds.
+    EXECUTION_INTERVAL = 60
+
+    # Default `:timeout_interval` in seconds.
+    TIMEOUT_INTERVAL = 30
+
+    # Create a new TimerTask with the given task and configuration.
+    #
+    # @!macro timer_task_initialize
+    #   @param [Hash] opts the options defining task execution.
+    #   @option opts [Integer] :execution_interval number of seconds between
+    #     task executions (default: EXECUTION_INTERVAL)
+    #   @option opts [Integer] :timeout_interval number of seconds a task can
+    #     run before it is considered to have failed (default: TIMEOUT_INTERVAL)
+    #   @option opts [Boolean] :run_now Whether to run the task immediately
+    #     upon instantiation or to wait until the first #  execution_interval
+    #     has passed (default: false)
+    #
+    #   @!macro deref_options
+    #
+    #   @raise ArgumentError when no block is given.
+    #
+    #   @yield to the block after :execution_interval seconds have passed since
+    #     the last yield
+    #   @yieldparam task a reference to the `TimerTask` instance so that the
+    #     block can control its own lifecycle. Necessary since `self` will
+    #     refer to the execution context of the block rather than the running
+    #     `TimerTask`.
+    #
+    #   @return [TimerTask] the new `TimerTask`
+    def initialize(opts = {}, &task)
+      raise ArgumentError.new('no block given') unless block_given?
+      super
+      set_deref_options opts
+    end
+
+    # Is the executor running?
+    #
+    # @return [Boolean] `true` when running, `false` when shutting down or shutdown
+    def running?
+      @running.true?
+    end
+
+    # Execute a previously created `TimerTask`.
+    #
+    # @return [TimerTask] a reference to `self`
+    #
+    # @example Instance and execute in separate steps
+    #   task = Concurrent::TimerTask.new(execution_interval: 10){ print "Hello World\n" }
+    #   task.running? #=> false
+    #   task.execute
+    #   task.running? #=> true
+    #
+    # @example Instance and execute in one line
+    #   task = Concurrent::TimerTask.new(execution_interval: 10){ print "Hello World\n" }.execute
+    #   task.running? #=> true
+    def execute
+      synchronize do
+        if @running.false?
+          @running.make_true
+          schedule_next_task(@run_now ? 0 : @execution_interval)
+        end
+      end
+      self
+    end
+
+    # Create and execute a new `TimerTask`.
+    #
+    # @!macro timer_task_initialize
+    #
+    # @example
+    #   task = Concurrent::TimerTask.execute(execution_interval: 10){ print "Hello World\n" }
+    #   task.running? #=> true
+    def self.execute(opts = {}, &task)
+      TimerTask.new(opts, &task).execute
+    end
+
+    # @!attribute [rw] execution_interval
+    # @return [Fixnum] Number of seconds after the task completes before the
+    #   task is performed again.
+    def execution_interval
+      synchronize { @execution_interval }
+    end
+
+    # @!attribute [rw] execution_interval
+    # @return [Fixnum] Number of seconds after the task completes before the
+    #   task is performed again.
+    def execution_interval=(value)
+      if (value = value.to_f) <= 0.0
+        raise ArgumentError.new('must be greater than zero')
+      else
+        synchronize { @execution_interval = value }
+      end
+    end
+
+    # @!attribute [rw] timeout_interval
+    # @return [Fixnum] Number of seconds the task can run before it is
+    #   considered to have failed.
+    def timeout_interval
+      synchronize { @timeout_interval }
+    end
+
+    # @!attribute [rw] timeout_interval
+    # @return [Fixnum] Number of seconds the task can run before it is
+    #   considered to have failed.
+    def timeout_interval=(value)
+      if (value = value.to_f) <= 0.0
+        raise ArgumentError.new('must be greater than zero')
+      else
+        synchronize { @timeout_interval = value }
+      end
+    end
+
+    private :post, :<<
+
+    private
+
+    def ns_initialize(opts, &task)
+      set_deref_options(opts)
+
+      self.execution_interval = opts[:execution] || opts[:execution_interval] || EXECUTION_INTERVAL
+      self.timeout_interval = opts[:timeout] || opts[:timeout_interval] || TIMEOUT_INTERVAL
+      @run_now = opts[:now] || opts[:run_now]
+      @executor = Concurrent::SafeTaskExecutor.new(task)
+      @running = Concurrent::AtomicBoolean.new(false)
+      @value = nil
+
+      self.observers = Collection::CopyOnNotifyObserverSet.new
+    end
+
+    # @!visibility private
+    def ns_shutdown_execution
+      @running.make_false
+      super
+    end
+
+    # @!visibility private
+    def ns_kill_execution
+      @running.make_false
+      super
+    end
+
+    # @!visibility private
+    def schedule_next_task(interval = execution_interval)
+      ScheduledTask.execute(interval, args: [Concurrent::Event.new], &method(:execute_task))
+      nil
+    end
+
+    # @!visibility private
+    def execute_task(completion)
+      return nil unless @running.true?
+      ScheduledTask.execute(timeout_interval, args: [completion], &method(:timeout_task))
+      _success, value, reason = @executor.execute(self)
+      if completion.try?
+        self.value = value
+        schedule_next_task
+        time = Time.now
+        observers.notify_observers do
+          [time, self.value, reason]
+        end
+      end
+      nil
+    end
+
+    # @!visibility private
+    def timeout_task(completion)
+      return unless @running.true?
+      if completion.try?
+        self.value = value
+        schedule_next_task
+        observers.notify_observers(Time.now, nil, Concurrent::TimeoutError.new)
+      end
+    end
+  end
+end