resque-dynamic-queues 0.5.0

data/.gitignore

@@ -0,0 +1,8 @@
+*.gem
+.bundle
+Gemfile.lock
+pkg/*
+.idea
+spec/dump.rdb
+redis-server.log
+redis.pid

data/Gemfile

@@ -0,0 +1,4 @@
+source "http://rubygems.org"
+
+# Specify your gem's dependencies in resque-dynamic-queues.gemspec
+gemspec

data/README.md

@@ -0,0 +1,46 @@
+A resque plugin for specifying the queues a worker pulls from with wildcards, negations, or dynamic look up from redis.
+
+Authored against Resque 1.15, so it at least works with that - try running the tests if you use a different version of resque
+
+Usage:
+
+Start your workers with a QUEUE that can contain '*' for zero-or more of any character, '!' to exclude the following pattern, or @key to look up the patterns from redis.  Some examples help:
+
+QUEUE=foo rake resque:work
+
+  Pulls jobs from the queue 'foo'
+
+QUEUE=* rake resque:work
+
+  Pulls jobs from any queue
+
+QUEUE=*foo rake resque:work
+
+  Pulls jobs from queues that end in foo
+
+QUEUE=*foo* rake resque:work
+
+  Pulls jobs from queues whose names contain foo
+
+QUEUE=*foo*,!foobar rake resque:work
+
+  Pulls jobs from queues whose names contain foo except the foobar queue
+
+QUEUE=*foo*,!*bar rake resque:work
+
+  Pulls jobs from queues whose names contain foo except queues whose names end in bar
+
+QUEUE=@key rake resque:work
+
+  Pulls jobs from queue names stored in redis (use Resque.set_dynamic_queue("key", ["queue_name1", "queue_name2"]) to set them)
+
+QUEUE=@ rake resque:work
+
+  Pulls jobs from queue names stored in redis using the hostname of the worker
+
+Resque.set_dynamic_queue("key", ["*foo*", "!*bar"])
+
+QUEUE=@key rake resque:work
+
+  Pulls jobs from queue names stored in redis, with wildcards/negations
+

data/Rakefile

@@ -0,0 +1,2 @@
+require 'bundler'
+Bundler::GemHelper.install_tasks

data/lib/resque-dynamic-queues.rb

@@ -0,0 +1,10 @@
+require 'resque'
+require 'resque/worker'
+require 'resque/plugins/dynamic_queues/attributes'
+require 'resque/plugins/dynamic_queues/queues'
+
+#module Resque
+#  extend Resque::Plugins::DynamicQueues::Attributes
+#end
+Resque.send(:extend, Resque::Plugins::DynamicQueues::Attributes)
+Resque::Worker.send(:include, Resque::Plugins::DynamicQueues::Queues)

data/lib/resque/plugins/dynamic_queues/attributes.rb

@@ -0,0 +1,21 @@
+module Resque
+  module Plugins
+    module DynamicQueues
+      module Attributes
+
+        def get_dynamic_queue(key)
+          redis.lrange("dynamic_queue:#{key}", 0, -1)
+        end
+
+        def set_dynamic_queue(key, values)
+          k = "dynamic_queue:#{key}"
+          redis.del(k)
+          Array(values).each do |v|
+             redis.rpush(k, v)
+          end
+        end
+
+      end
+    end
+  end
+end

data/lib/resque/plugins/dynamic_queues/queues.rb

@@ -0,0 +1,67 @@
+module Resque
+  module Plugins
+    module DynamicQueues
+      module Queues
+
+        # Returns a list of queues to use when searching for a job.
+        #
+        # A splat ("*") means you want every queue (in alpha order) - this
+        # can be useful for dynamically adding new queues.
+        #
+        # The splat can also be used as a wildcard within a queue name,
+        # e.g. "*high*", and negation can be indicated with a prefix of "!"
+        #
+        # An @key can be used to dynamically look up the queue list for key from redis.
+        # If no key is supplied, it defaults to the worker's hostname, and wildcards
+        # and negations can be used inside this dynamic queue list.   Set the queue
+        # list for a key with Resque.set_dynamic_queue(key, ["q1", "q2"]
+        #
+        def queues_with_dynamic
+          queue_names = @queues
+
+          return queues_without_dynamic if queue_names.grep(/(^!)|(^@)|(\*)/).size == 0
+
+          real_queues = Resque.queues
+          matched_queues = []
+
+          queue_names.each do |q|
+            q = q.to_s
+
+            if q =~ /^@(.*)/
+              key = $1.strip
+              key = hostname if key.size == 0
+              queue_names.concat(Resque.get_dynamic_queue(key))
+              next
+            end
+
+            if q[0] == '!'
+              negated = true
+              q = q[1..-1]
+            end
+
+            patstr = q.gsub(/\*/, ".*")
+            pattern = /^#{patstr}$/
+            if negated
+              matched_queues -= matched_queues.grep(pattern)
+            else
+              matches = real_queues.grep(/^#{pattern}$/)
+              matches = [q] if matches.size == 0 && q == patstr
+              matched_queues.concat(matches)
+            end
+          end
+
+          return matched_queues.uniq.sort
+        end
+
+
+        def self.included(receiver)
+          receiver.class_eval do
+            alias queues_without_dynamic queues
+            alias queues queues_with_dynamic
+          end
+        end
+
+      end
+    end
+  end
+end

data/lib/resque/plugins/dynamic_queues/version.rb

@@ -0,0 +1,7 @@
+module Resque
+  module Plugins
+    module DynamicQueues
+      VERSION = "0.5.0"
+    end
+  end
+end

data/resque-dynamic-queues.gemspec

@@ -0,0 +1,27 @@
+# -*- encoding: utf-8 -*-
+$:.push File.expand_path("../lib", __FILE__)
+require 'resque/plugins/dynamic_queues/version'
+
+
+Gem::Specification.new do |s|
+  s.name        = "resque-dynamic-queues"
+  s.version     = Resque::Plugins::DynamicQueues::VERSION
+  s.platform    = Gem::Platform::RUBY
+  s.authors     = ["Matt Conway"]
+  s.email       = ["matt@conwaysplace.com"]
+  s.homepage    = ""
+  s.summary     = %q{A resque plugin for specifying the queues a worker pulls from with wildcards, negations, or dynamic look up from redis}
+  s.description = %q{A resque plugin for specifying the queues a worker pulls from with wildcards, negations, or dynamic look up from redis}
+
+  s.rubyforge_project = "resque-dynamic-queues"
+
+  s.files         = `git ls-files`.split("\n")
+  s.test_files    = `git ls-files -- {test,spec,features}/*`.split("\n")
+  s.executables   = `git ls-files -- bin/*`.split("\n").map{ |f| File.basename(f) }
+  s.require_paths = ["lib"]
+
+  s.add_dependency("resque", '~> 1.15')
+  s.add_development_dependency('rspec', '~> 2.5')
+
+end
+

data/spec/queues_spec.rb

@@ -0,0 +1,131 @@
+require "spec_helper"
+
+describe "Dynamic Queues" do
+
+  before(:each) do
+    Resque.redis.flushall
+  end
+
+  context "basic resque behavior still works" do
+
+    it "can work on multiple queues" do
+      Resque::Job.create(:high, SomeJob)
+      Resque::Job.create(:critical, SomeJob)
+
+      worker = Resque::Worker.new(:critical, :high)
+
+      worker.process
+      Resque.size(:high).should == 1
+      Resque.size(:critical).should == 0
+
+      worker.process
+      Resque.size(:high).should == 0
+    end
+
+    it "can work on all queues" do
+      Resque::Job.create(:high, SomeJob)
+      Resque::Job.create(:critical, SomeJob)
+      Resque::Job.create(:blahblah, SomeJob)
+
+      worker = Resque::Worker.new("*")
+
+      worker.work(0)
+      Resque.size(:high).should == 0
+      Resque.size(:critical).should == 0
+      Resque.size(:blahblah).should == 0
+    end
+
+    it "processes * queues in alphabetical order" do
+      Resque::Job.create(:high, SomeJob)
+      Resque::Job.create(:critical, SomeJob)
+      Resque::Job.create(:blahblah, SomeJob)
+
+      worker = Resque::Worker.new("*")
+
+      worker.work(0) do |job|
+        Resque.redis.rpush("processed_queues", job.queue)
+      end
+
+      Resque.redis.lrange("processed_queues", 0, -1).should == %w( high critical blahblah ).sort
+    end
+
+    it "should pass lint" do
+      Resque::Plugin.lint(Resque::Plugins::DynamicQueues)
+    end
+    
+  end
+
+  context "basic queue patterns" do
+
+    before(:each) do
+      Resque.watch_queue("high_x")
+      Resque.watch_queue("foo")
+      Resque.watch_queue("high_y")
+      Resque.watch_queue("superhigh_z")
+    end
+
+    it "can specify simple queues" do
+      worker = Resque::Worker.new("foo")
+      worker.queues.should == ["foo"]
+
+      worker = Resque::Worker.new("foo", "bar")
+      worker.queues.should == ["foo", "bar"]
+    end
+
+    it "can specify simple wildcard" do
+      worker = Resque::Worker.new("*")
+      worker.queues.should == ["foo", "high_x", "high_y", "superhigh_z"]
+    end
+
+    it "can include queues with pattern"do
+      worker = Resque::Worker.new("high*")
+      worker.queues.should == ["high_x", "high_y"]
+      
+      worker = Resque::Worker.new("*high_z")
+      worker.queues.should == ["superhigh_z"]
+
+      worker = Resque::Worker.new("*high*")
+      worker.queues.should == ["high_x", "high_y", "superhigh_z"]
+    end
+
+    it "can blacklist queues" do
+      worker = Resque::Worker.new("*", "!foo")
+      worker.queues.should == ["high_x", "high_y", "superhigh_z"]
+    end
+
+    it "can blacklist queues with pattern" do
+      worker = Resque::Worker.new("*", "!*high*")
+      worker.queues.should == ["foo"]
+    end
+
+  end
+
+  context "redis backed queues" do
+
+    it "can dynamically lookup queues" do
+      Resque.set_dynamic_queue("mykey", ["foo", "bar"])
+      worker = Resque::Worker.new("@mykey")
+      worker.queues.should == ["bar", "foo"]
+    end
+
+    it "uses hostname as default key in dynamic queues" do
+      host = `hostname`.chomp
+      Resque.set_dynamic_queue(host, ["foo", "bar"])
+      worker = Resque::Worker.new("@")
+      worker.queues.should == ["bar", "foo"]
+    end
+
+    it "can use wildcards in dynamic queues" do
+      Resque.watch_queue("high_x")
+      Resque.watch_queue("foo")
+      Resque.watch_queue("high_y")
+      Resque.watch_queue("superhigh_z")
+      
+      Resque.set_dynamic_queue("mykey", ["*high*", "!high_y"])
+      worker = Resque::Worker.new("@mykey")
+      worker.queues.should == ["high_x", "superhigh_z"]
+    end
+    
+  end
+
+end

data/spec/redis-test.conf

@@ -0,0 +1,312 @@
+# Redis configuration file example
+
+# Note on units: when memory size is needed, it is possible to specifiy
+# it in the usual form of 1k 5GB 4M and so forth:
+#
+# 1k => 1000 bytes
+# 1kb => 1024 bytes
+# 1m => 1000000 bytes
+# 1mb => 1024*1024 bytes
+# 1g => 1000000000 bytes
+# 1gb => 1024*1024*1024 bytes
+#
+# units are case insensitive so 1GB 1Gb 1gB are all the same.
+
+# By default Redis does not run as a daemon. Use 'yes' if you need it.
+# Note that Redis will write a pid file in ./tmp/run/redis.pid when daemonized.
+daemonize yes
+
+# When running daemonized, Redis writes a pid file in ./tmp/run/redis.pid by
+# default. You can specify a custom pid file location here.
+pidfile ./redis.pid
+
+# Accept connections on the specified port, default is 6379
+port 9736
+
+# If you want you can bind a single interface, if the bind option is not
+# specified all the interfaces will listen for incoming connections.
+#
+bind 127.0.0.1
+
+# Close the connection after a client is idle for N seconds (0 to disable)
+timeout 300
+
+# Set server verbosity to 'debug'
+# it can be one of:
+# debug (a lot of information, useful for development/testing)
+# verbose (many rarely useful info, but not a mess like the debug level)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+loglevel verbose
+
+# Specify the log file name. Also 'stdout' can be used to force
+# Redis to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile ./redis-server.log
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+################################ SNAPSHOTTING  #################################
+#
+# Save the DB on disk:
+#
+#   save <seconds> <changes>
+#
+#   Will save the DB if both the given number of seconds and the given
+#   number of write operations against the DB occurred.
+#
+#   In the example below the behaviour will be to save:
+#   after 900 sec (15 min) if at least 1 key changed
+#   after 300 sec (5 min) if at least 10 keys changed
+#   after 60 sec if at least 10000 keys changed
+#
+#   Note: you can disable saving at all commenting all the "save" lines.
+
+save 900 1
+save 300 10
+save 60 10000
+
+# Compress string objects using LZF when dump .rdb databases?
+# For default that's set to 'yes' as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
+# The filename where to dump the DB
+dbfilename dump.rdb
+
+# The working directory.
+#
+# The DB will be written inside this directory, with the filename specified
+# above using the 'dbfilename' configuration directive.
+# 
+# Also the Append Only File will be created inside this directory.
+# 
+# Note that you must specify a directory here, not a file name.
+dir .
+
+################################# REPLICATION #################################
+
+# Master-Slave replication. Use slaveof to make a Redis instance a copy of
+# another Redis server. Note that the configuration is local to the slave
+# so for example it is possible to configure the slave to save the DB with a
+# different interval, or to listen to another port, and so on.
+#
+# slaveof <masterip> <masterport>
+
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the slave to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the slave request.
+#
+# masterauth <master-password>
+
+################################## SECURITY ###################################
+
+# Require clients to issue AUTH <PASSWORD> before processing any other
+# commands.  This might be useful in environments in which you do not trust
+# others with access to the host running redis-server.
+#
+# This should stay commented out for backward compatibility and because most
+# people do not need auth (e.g. they run their own servers).
+# 
+# Warning: since Redis is pretty fast an outside user can try up to
+# 150k passwords per second against a good box. This means that you should
+# use a very strong password otherwise it will be very easy to break.
+#
+# requirepass foobared
+
+################################### LIMITS ####################################
+
+# Set the max number of connected clients at the same time. By default there
+# is no limit, and it's up to the number of file descriptors the Redis process
+# is able to open. The special value '0' means no limits.
+# Once the limit is reached Redis will close all the new connections sending
+# an error 'max number of clients reached'.
+#
+# maxclients 128
+
+# Don't use more memory than the specified amount of bytes.
+# When the memory limit is reached Redis will try to remove keys with an
+# EXPIRE set. It will try to start freeing keys that are going to expire
+# in little time and preserve keys with a longer time to live.
+# Redis will also try to remove objects from free lists if possible.
+#
+# If all this fails, Redis will start to reply with errors to commands
+# that will use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to most read-only commands like GET.
+#
+# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
+# 'state' server or cache, not as a real DB. When Redis is used as a real
+# database the memory usage will grow over the weeks, it will be obvious if
+# it is going to use too much memory in the long run, and you'll have the time
+# to upgrade. With maxmemory after the limit is reached you'll start to get
+# errors for write operations, and this may even lead to DB inconsistency.
+#
+# maxmemory <bytes>
+
+############################## APPEND ONLY MODE ###############################
+
+# By default Redis asynchronously dumps the dataset on disk. If you can live
+# with the idea that the latest records will be lost if something like a crash
+# happens this is the preferred way to run Redis. If instead you care a lot
+# about your data and don't want to that a single record can get lost you should
+# enable the append only mode: when this mode is enabled Redis will append
+# every write operation received in the file appendonly.aof. This file will
+# be read on startup in order to rebuild the full dataset in memory.
+#
+# Note that you can have both the async dumps and the append only file if you
+# like (you have to comment the "save" statements above to disable the dumps).
+# Still if append only mode is enabled Redis will load the data from the
+# log file at startup ignoring the dump.rdb file.
+#
+# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
+# log file in background when it gets too big.
+
+appendonly no
+
+# The name of the append only file (default: "appendonly.aof")
+# appendfilename appendonly.aof
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead to wait for more data in the output buffer. Some OS will really flush 
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log . Slow, Safest.
+# everysec: fsync only if one second passed since the last fsync. Compromise.
+#
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".
+
+# appendfsync always
+appendfsync everysec
+# appendfsync no
+
+################################ VIRTUAL MEMORY ###############################
+
+# Virtual Memory allows Redis to work with datasets bigger than the actual
+# amount of RAM needed to hold the whole dataset in memory.
+# In order to do so very used keys are taken in memory while the other keys
+# are swapped into a swap file, similarly to what operating systems do
+# with memory pages.
+#
+# To enable VM just set 'vm-enabled' to yes, and set the following three
+# VM parameters accordingly to your needs.
+
+vm-enabled no
+# vm-enabled yes
+
+# This is the path of the Redis swap file. As you can guess, swap files
+# can't be shared by different Redis instances, so make sure to use a swap
+# file for every redis process you are running. Redis will complain if the
+# swap file is already in use.
+#
+# The best kind of storage for the Redis swap file (that's accessed at random) 
+# is a Solid State Disk (SSD).
+#
+# *** WARNING *** if you are using a shared hosting the default of putting
+# the swap file under /tmp is not secure. Create a dir with access granted
+# only to Redis user and configure Redis to create the swap file there.
+vm-swap-file ./tmp/redis.swap
+
+# vm-max-memory configures the VM to use at max the specified amount of
+# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
+# is, if there is still enough contiguous space in the swap file.
+#
+# With vm-max-memory 0 the system will swap everything it can. Not a good
+# default, just specify the max amount of RAM you can in bytes, but it's
+# better to leave some margin. For instance specify an amount of RAM
+# that's more or less between 60 and 80% of your free RAM.
+vm-max-memory 0
+
+# Redis swap files is split into pages. An object can be saved using multiple
+# contiguous pages, but pages can't be shared between different objects.
+# So if your page is too big, small objects swapped out on disk will waste
+# a lot of space. If you page is too small, there is less space in the swap
+# file (assuming you configured the same number of total swap file pages).
+#
+# If you use a lot of small objects, use a page size of 64 or 32 bytes.
+# If you use a lot of big objects, use a bigger page size.
+# If unsure, use the default :)
+vm-page-size 32
+
+# Number of total memory pages in the swap file.
+# Given that the page table (a bitmap of free/used pages) is taken in memory,
+# every 8 pages on disk will consume 1 byte of RAM.
+#
+# The total swap size is vm-page-size * vm-pages
+#
+# With the default of 32-bytes memory pages and 134217728 pages Redis will
+# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
+#
+# It's better to use the smallest acceptable value for your application,
+# but the default is large in order to work in most conditions.
+vm-pages 134217728
+
+# Max number of VM I/O threads running at the same time.
+# This threads are used to read/write data from/to swap file, since they
+# also encode and decode objects from disk to memory or the reverse, a bigger
+# number of threads can help with big objects even if they can't help with
+# I/O itself as the physical device may not be able to couple with many
+# reads/writes operations at the same time.
+#
+# The special value of 0 turn off threaded I/O and enables the blocking
+# Virtual Memory implementation.
+vm-max-threads 4
+
+############################### ADVANCED CONFIG ###############################
+
+# Glue small output buffers together in order to send small replies in a
+# single TCP packet. Uses a bit more CPU but most of the times it is a win
+# in terms of number of queries per second. Use 'yes' if unsure.
+glueoutputbuf yes
+
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 64
+hash-max-zipmap-value 512
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+# 
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here.  This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings.  Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf

data/spec/spec_helper.rb

@@ -0,0 +1,19 @@
+require 'resque-dynamic-queues'
+
+spec_dir = File.dirname(File.expand_path(__FILE__))
+REDIS_CMD = "redis-server #{spec_dir}/redis-test.conf"
+
+puts "Starting redis for testing at localhost:9736..."
+puts `cd #{spec_dir}; #{REDIS_CMD}`
+Resque.redis = 'localhost:9736'
+
+# Schedule the redis server for shutdown when tests are all finished.
+at_exit do
+  pid = File.read("#{spec_dir}/redis.pid").to_i rescue nil
+  system ("kill #{pid}") if pid != 0
+end
+
+class SomeJob
+  def self.perform(*args)
+  end
+end

metadata

@@ -0,0 +1,91 @@
+--- !ruby/object:Gem::Specification 
+name: resque-dynamic-queues
+version: !ruby/object:Gem::Version 
+  prerelease: 
+  version: 0.5.0
+platform: ruby
+authors: 
+- Matt Conway
+autorequire: 
+bindir: bin
+cert_chain: []
+
+date: 2011-03-23 00:00:00 -04:00
+default_executable: 
+dependencies: 
+- !ruby/object:Gem::Dependency 
+  name: resque
+  prerelease: false
+  requirement: &id001 !ruby/object:Gem::Requirement 
+    none: false
+    requirements: 
+    - - ~>
+      - !ruby/object:Gem::Version 
+        version: "1.15"
+  type: :runtime
+  version_requirements: *id001
+- !ruby/object:Gem::Dependency 
+  name: rspec
+  prerelease: false
+  requirement: &id002 !ruby/object:Gem::Requirement 
+    none: false
+    requirements: 
+    - - ~>
+      - !ruby/object:Gem::Version 
+        version: "2.5"
+  type: :development
+  version_requirements: *id002
+description: A resque plugin for specifying the queues a worker pulls from with wildcards, negations, or dynamic look up from redis
+email: 
+- matt@conwaysplace.com
+executables: []
+
+extensions: []
+
+extra_rdoc_files: []
+
+files: 
+- .gitignore
+- Gemfile
+- README.md
+- Rakefile
+- lib/resque-dynamic-queues.rb
+- lib/resque/plugins/dynamic_queues/attributes.rb
+- lib/resque/plugins/dynamic_queues/queues.rb
+- lib/resque/plugins/dynamic_queues/version.rb
+- resque-dynamic-queues.gemspec
+- spec/queues_spec.rb
+- spec/redis-test.conf
+- spec/spec_helper.rb
+has_rdoc: true
+homepage: ""
+licenses: []
+
+post_install_message: 
+rdoc_options: []
+
+require_paths: 
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement 
+  none: false
+  requirements: 
+  - - ">="
+    - !ruby/object:Gem::Version 
+      version: "0"
+required_rubygems_version: !ruby/object:Gem::Requirement 
+  none: false
+  requirements: 
+  - - ">="
+    - !ruby/object:Gem::Version 
+      version: "0"
+requirements: []
+
+rubyforge_project: resque-dynamic-queues
+rubygems_version: 1.6.1
+signing_key: 
+specification_version: 3
+summary: A resque plugin for specifying the queues a worker pulls from with wildcards, negations, or dynamic look up from redis
+test_files: 
+- spec/queues_spec.rb
+- spec/redis-test.conf
+- spec/spec_helper.rb