repull 0.2.30 → 0.2.32

data/lib/repull/models/get_usage_summary200_response.rb

@@ -23,6 +23,8 @@ module Repull
 
     attr_accessor :remaining
 
+    attr_accessor :credits
+
     attr_accessor :daily_resets_at
 
     attr_accessor :resets_at
@@ -46,6 +48,7 @@ module Repull
         :'limits' => :'limits',
         :'used' => :'used',
         :'remaining' => :'remaining',
+        :'credits' => :'credits',
         :'daily_resets_at' => :'dailyResetsAt',
         :'resets_at' => :'resetsAt',
         :'breakdown' => :'breakdown',
@@ -74,6 +77,7 @@ module Repull
         :'limits' => :'GetUsageSummary200ResponseLimits',
         :'used' => :'GetUsageSummary200ResponseUsed',
         :'remaining' => :'GetUsageSummary200ResponseRemaining',
+        :'credits' => :'GetUsageSummary200ResponseCredits',
         :'daily_resets_at' => :'Time',
         :'resets_at' => :'Time',
         :'breakdown' => :'Array<GetUsageSummary200ResponseBreakdownInner>',
@@ -123,6 +127,10 @@ module Repull
         self.remaining = attributes[:'remaining']
       end
 
+      if attributes.key?(:'credits')
+        self.credits = attributes[:'credits']
+      end
+
       if attributes.key?(:'daily_resets_at')
         self.daily_resets_at = attributes[:'daily_resets_at']
       end
@@ -184,6 +192,7 @@ module Repull
           limits == o.limits &&
           used == o.used &&
           remaining == o.remaining &&
+          credits == o.credits &&
           daily_resets_at == o.daily_resets_at &&
           resets_at == o.resets_at &&
           breakdown == o.breakdown &&
@@ -203,7 +212,7 @@ module Repull
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [tier, limits, used, remaining, daily_resets_at, resets_at, breakdown, timeline, status_distribution, totals, range, plan_notice].hash
+      [tier, limits, used, remaining, credits, daily_resets_at, resets_at, breakdown, timeline, status_distribution, totals, range, plan_notice].hash
     end
 
     # Builds the object from hash

data/lib/repull/models/get_usage_summary200_response_credits.rb

@@ -0,0 +1,186 @@
+=begin
+#Repull API
+
+#The unified API for vacation rental tech. Connect to 50+ PMS platforms and 4 OTA channels through one REST API. Built-in AI operations for guest communication, pricing, and listing optimization.  ## Designed for AI agents Every error response on this API includes machine-parseable fields so an LLM (Claude in MCP, Cursor, Cline, GPT, etc.) can self-recover without escalating to a human: - `error.code` — stable string identifier (e.g. `invalid_params`, `rate_limit_exceeded`) - `error.message` — human-readable cause - `error.fix` — exact recovery steps (e.g. \"Pass `check_in_after` as ISO 8601: `?check_in_after=2026-01-15`\") - `error.docs_url` — link to the canonical write-up at `https://repull.dev/docs/errors/{code}` - `error.request_id` — id to correlate with server-side logs - `error.field` / `error.value_received` / `error.valid_values` / `error.did_you_mean` — when the error is parameter-specific - `error.retry_after` — seconds to wait before retrying (rate-limit + transient upstream)  `Access-Control-Expose-Headers` lists `x-request-id` and the `X-RateLimit-*` family so browsers can read them on cross-origin responses.  ## Quick Start 1. Get an API key at https://repull.dev/dashboard 2. Connect a PMS: `POST /v1/connect/{provider}` 3. List properties: `GET /v1/properties` 4. Get reservations: `GET /v1/reservations`  ## Authentication All requests require a Bearer token: ``` Authorization: Bearer sk_live_YOUR_API_KEY ```  ## Request Correlation (X-Request-ID) Every response carries an `X-Request-ID` header, e.g. `X-Request-ID: req_01HXY...`. Include this id in support tickets and bug reports — we can trace the full request lifecycle (auth, rate limit, handler, downstream calls, log row) from a single id.  You may set the header on the inbound request to forward your own trace id; we will echo it back instead of generating a new one. Accepted format: `^[\\\\w.-]{1,128}$`.  The id is also embedded in error envelopes as `request_id` so server-side log diffs work even when the response headers are stripped by an intermediate proxy.  ## Rate Limits The public API enforces a per-API-key sliding-window rate limit on top of the per-tier monthly + daily-AI quotas.  **Default policy:** 600 requests per 60 seconds, per API key. Sliding window — there is no fixed-minute boundary you can burst across.  Every response includes:  | Header | Meaning | |---|---| | `X-RateLimit-Limit` | Requests permitted in the current window. | | `X-RateLimit-Remaining` | Requests left in the current window after this call. | | `X-RateLimit-Reset` | Unix epoch (seconds) when the next slot opens. | | `X-RateLimit-Policy` | Machine-readable policy descriptor, e.g. `600;w=60`. | | `Retry-After` | Seconds to wait before retrying. **Only present on 429 responses.** |  **On 429 (rate_limit_exceeded):** the response body matches the standard error envelope with `code: \"rate_limit_exceeded\"`, plus `limit`, `window_seconds`, `retry_after`, and `request_id` fields. SDKs MUST honor `Retry-After` and use exponential backoff with jitter on subsequent retries — never a tight loop.  Recommended backoff: ``` sleep_ms = (Retry-After * 1000) + random(0..250) ```  Monthly + daily-AI tier quotas (`free`, `starter`, `custom`) are enforced separately and also surface as 429s; they include `tier`, `scope`, and `resetsAt` fields.  ## Plan Limits (402 — `listings_limit_exceeded`) The Repull API also enforces a per-tier cap on **active listings**:  | Tier | Active listings cap | |---|---| | `free` | 3 | | `starter` | unlimited (10 included, then billed per listing) | | `custom` | unlimited |  When a customer's active-listing count is above their tier cap, the API returns **`402 Payment Required`** with `error.code = \"listings_limit_exceeded\"` on every route EXCEPT:  - `/v1/health` — uptime probes are never gated. - `/v1/usage/*` — so dashboards can render the over-cap state. - Any `DELETE` — so the customer can trim listings to get back under the cap without paying.  Unlike 429, 402 is NOT a \"wait and retry\" condition — `Retry-After` is not set. The only paths back to 200 are:   1. `DELETE` enough listings to come back under the cap, or   2. Upgrade at `https://repull.dev/dashboard/billing`. The server-side usage cache is 60s, so the first 200 after an upgrade may take up to a minute.  The envelope mirrors `rate_limit_exceeded` for SDK ergonomics: `tier`, `limit`, `active_listings`, `upgrade_url`, plus the standard `code` / `message` / `fix` / `docs_url` / `request_id`.
+
+The version of the OpenAPI document: 1.0.0
+
+Generated by: https://openapi-generator.tech
+Generator version: 7.22.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Repull
+  # Pay-as-you-go wallet. Requests beyond your plan's monthly quota keep being served while `active`, billed at `usdPer1000Requests`. Top up at https://repull.dev/dashboard/billing.
+  class GetUsageSummary200ResponseCredits < ApiModelBase
+    attr_accessor :balance_usd
+
+    # Positive balance and not paused — usage beyond the monthly quota is being served.
+    attr_accessor :active
+
+    attr_accessor :paused
+
+    attr_accessor :usd_per1000_requests
+
+    # Requests beyond your quota the current balance pays for.
+    attr_accessor :requests_covered
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'balance_usd' => :'balanceUsd',
+        :'active' => :'active',
+        :'paused' => :'paused',
+        :'usd_per1000_requests' => :'usdPer1000Requests',
+        :'requests_covered' => :'requestsCovered'
+      }
+    end
+
+    # Returns attribute mapping this model knows about
+    def self.acceptable_attribute_map
+      attribute_map
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      acceptable_attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'balance_usd' => :'Float',
+        :'active' => :'Boolean',
+        :'paused' => :'Boolean',
+        :'usd_per1000_requests' => :'Float',
+        :'requests_covered' => :'Integer'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Repull::GetUsageSummary200ResponseCredits` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      acceptable_attribute_map = self.class.acceptable_attribute_map
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!acceptable_attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Repull::GetUsageSummary200ResponseCredits`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'balance_usd')
+        self.balance_usd = attributes[:'balance_usd']
+      end
+
+      if attributes.key?(:'active')
+        self.active = attributes[:'active']
+      end
+
+      if attributes.key?(:'paused')
+        self.paused = attributes[:'paused']
+      end
+
+      if attributes.key?(:'usd_per1000_requests')
+        self.usd_per1000_requests = attributes[:'usd_per1000_requests']
+      end
+
+      if attributes.key?(:'requests_covered')
+        self.requests_covered = attributes[:'requests_covered']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          balance_usd == o.balance_usd &&
+          active == o.active &&
+          paused == o.paused &&
+          usd_per1000_requests == o.usd_per1000_requests &&
+          requests_covered == o.requests_covered
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [balance_usd, active, paused, usd_per1000_requests, requests_covered].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+  end
+
+end

data/lib/repull/models/list_booking_transactions200_response.rb

@@ -0,0 +1,158 @@
+=begin
+#Repull API
+
+#The unified API for vacation rental tech. Connect to 50+ PMS platforms and 4 OTA channels through one REST API. Built-in AI operations for guest communication, pricing, and listing optimization.  ## Designed for AI agents Every error response on this API includes machine-parseable fields so an LLM (Claude in MCP, Cursor, Cline, GPT, etc.) can self-recover without escalating to a human: - `error.code` — stable string identifier (e.g. `invalid_params`, `rate_limit_exceeded`) - `error.message` — human-readable cause - `error.fix` — exact recovery steps (e.g. \"Pass `check_in_after` as ISO 8601: `?check_in_after=2026-01-15`\") - `error.docs_url` — link to the canonical write-up at `https://repull.dev/docs/errors/{code}` - `error.request_id` — id to correlate with server-side logs - `error.field` / `error.value_received` / `error.valid_values` / `error.did_you_mean` — when the error is parameter-specific - `error.retry_after` — seconds to wait before retrying (rate-limit + transient upstream)  `Access-Control-Expose-Headers` lists `x-request-id` and the `X-RateLimit-*` family so browsers can read them on cross-origin responses.  ## Quick Start 1. Get an API key at https://repull.dev/dashboard 2. Connect a PMS: `POST /v1/connect/{provider}` 3. List properties: `GET /v1/properties` 4. Get reservations: `GET /v1/reservations`  ## Authentication All requests require a Bearer token: ``` Authorization: Bearer sk_live_YOUR_API_KEY ```  ## Request Correlation (X-Request-ID) Every response carries an `X-Request-ID` header, e.g. `X-Request-ID: req_01HXY...`. Include this id in support tickets and bug reports — we can trace the full request lifecycle (auth, rate limit, handler, downstream calls, log row) from a single id.  You may set the header on the inbound request to forward your own trace id; we will echo it back instead of generating a new one. Accepted format: `^[\\\\w.-]{1,128}$`.  The id is also embedded in error envelopes as `request_id` so server-side log diffs work even when the response headers are stripped by an intermediate proxy.  ## Rate Limits The public API enforces a per-API-key sliding-window rate limit on top of the per-tier monthly + daily-AI quotas.  **Default policy:** 600 requests per 60 seconds, per API key. Sliding window — there is no fixed-minute boundary you can burst across.  Every response includes:  | Header | Meaning | |---|---| | `X-RateLimit-Limit` | Requests permitted in the current window. | | `X-RateLimit-Remaining` | Requests left in the current window after this call. | | `X-RateLimit-Reset` | Unix epoch (seconds) when the next slot opens. | | `X-RateLimit-Policy` | Machine-readable policy descriptor, e.g. `600;w=60`. | | `Retry-After` | Seconds to wait before retrying. **Only present on 429 responses.** |  **On 429 (rate_limit_exceeded):** the response body matches the standard error envelope with `code: \"rate_limit_exceeded\"`, plus `limit`, `window_seconds`, `retry_after`, and `request_id` fields. SDKs MUST honor `Retry-After` and use exponential backoff with jitter on subsequent retries — never a tight loop.  Recommended backoff: ``` sleep_ms = (Retry-After * 1000) + random(0..250) ```  Monthly + daily-AI tier quotas (`free`, `starter`, `custom`) are enforced separately and also surface as 429s; they include `tier`, `scope`, and `resetsAt` fields.  ## Plan Limits (402 — `listings_limit_exceeded`) The Repull API also enforces a per-tier cap on **active listings**:  | Tier | Active listings cap | |---|---| | `free` | 3 | | `starter` | unlimited (10 included, then billed per listing) | | `custom` | unlimited |  When a customer's active-listing count is above their tier cap, the API returns **`402 Payment Required`** with `error.code = \"listings_limit_exceeded\"` on every route EXCEPT:  - `/v1/health` — uptime probes are never gated. - `/v1/usage/*` — so dashboards can render the over-cap state. - Any `DELETE` — so the customer can trim listings to get back under the cap without paying.  Unlike 429, 402 is NOT a \"wait and retry\" condition — `Retry-After` is not set. The only paths back to 200 are:   1. `DELETE` enough listings to come back under the cap, or   2. Upgrade at `https://repull.dev/dashboard/billing`. The server-side usage cache is 60s, so the first 200 after an upgrade may take up to a minute.  The envelope mirrors `rate_limit_exceeded` for SDK ergonomics: `tier`, `limit`, `active_listings`, `upgrade_url`, plus the standard `code` / `message` / `fix` / `docs_url` / `request_id`.
+
+The version of the OpenAPI document: 1.0.0
+
+Generated by: https://openapi-generator.tech
+Generator version: 7.22.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Repull
+  class ListBookingTransactions200Response < ApiModelBase
+    attr_accessor :data
+
+    attr_accessor :pagination
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'data' => :'data',
+        :'pagination' => :'pagination'
+      }
+    end
+
+    # Returns attribute mapping this model knows about
+    def self.acceptable_attribute_map
+      attribute_map
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      acceptable_attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'data' => :'Array<Transaction>',
+        :'pagination' => :'Pagination'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Repull::ListBookingTransactions200Response` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      acceptable_attribute_map = self.class.acceptable_attribute_map
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!acceptable_attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Repull::ListBookingTransactions200Response`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'data')
+        if (value = attributes[:'data']).is_a?(Array)
+          self.data = value
+        end
+      end
+
+      if attributes.key?(:'pagination')
+        self.pagination = attributes[:'pagination']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          data == o.data &&
+          pagination == o.pagination
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [data, pagination].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+  end
+
+end

data/lib/repull/models/list_hotels200_response.rb

@@ -0,0 +1,158 @@
+=begin
+#Repull API
+
+#The unified API for vacation rental tech. Connect to 50+ PMS platforms and 4 OTA channels through one REST API. Built-in AI operations for guest communication, pricing, and listing optimization.  ## Designed for AI agents Every error response on this API includes machine-parseable fields so an LLM (Claude in MCP, Cursor, Cline, GPT, etc.) can self-recover without escalating to a human: - `error.code` — stable string identifier (e.g. `invalid_params`, `rate_limit_exceeded`) - `error.message` — human-readable cause - `error.fix` — exact recovery steps (e.g. \"Pass `check_in_after` as ISO 8601: `?check_in_after=2026-01-15`\") - `error.docs_url` — link to the canonical write-up at `https://repull.dev/docs/errors/{code}` - `error.request_id` — id to correlate with server-side logs - `error.field` / `error.value_received` / `error.valid_values` / `error.did_you_mean` — when the error is parameter-specific - `error.retry_after` — seconds to wait before retrying (rate-limit + transient upstream)  `Access-Control-Expose-Headers` lists `x-request-id` and the `X-RateLimit-*` family so browsers can read them on cross-origin responses.  ## Quick Start 1. Get an API key at https://repull.dev/dashboard 2. Connect a PMS: `POST /v1/connect/{provider}` 3. List properties: `GET /v1/properties` 4. Get reservations: `GET /v1/reservations`  ## Authentication All requests require a Bearer token: ``` Authorization: Bearer sk_live_YOUR_API_KEY ```  ## Request Correlation (X-Request-ID) Every response carries an `X-Request-ID` header, e.g. `X-Request-ID: req_01HXY...`. Include this id in support tickets and bug reports — we can trace the full request lifecycle (auth, rate limit, handler, downstream calls, log row) from a single id.  You may set the header on the inbound request to forward your own trace id; we will echo it back instead of generating a new one. Accepted format: `^[\\\\w.-]{1,128}$`.  The id is also embedded in error envelopes as `request_id` so server-side log diffs work even when the response headers are stripped by an intermediate proxy.  ## Rate Limits The public API enforces a per-API-key sliding-window rate limit on top of the per-tier monthly + daily-AI quotas.  **Default policy:** 600 requests per 60 seconds, per API key. Sliding window — there is no fixed-minute boundary you can burst across.  Every response includes:  | Header | Meaning | |---|---| | `X-RateLimit-Limit` | Requests permitted in the current window. | | `X-RateLimit-Remaining` | Requests left in the current window after this call. | | `X-RateLimit-Reset` | Unix epoch (seconds) when the next slot opens. | | `X-RateLimit-Policy` | Machine-readable policy descriptor, e.g. `600;w=60`. | | `Retry-After` | Seconds to wait before retrying. **Only present on 429 responses.** |  **On 429 (rate_limit_exceeded):** the response body matches the standard error envelope with `code: \"rate_limit_exceeded\"`, plus `limit`, `window_seconds`, `retry_after`, and `request_id` fields. SDKs MUST honor `Retry-After` and use exponential backoff with jitter on subsequent retries — never a tight loop.  Recommended backoff: ``` sleep_ms = (Retry-After * 1000) + random(0..250) ```  Monthly + daily-AI tier quotas (`free`, `starter`, `custom`) are enforced separately and also surface as 429s; they include `tier`, `scope`, and `resetsAt` fields.  ## Plan Limits (402 — `listings_limit_exceeded`) The Repull API also enforces a per-tier cap on **active listings**:  | Tier | Active listings cap | |---|---| | `free` | 3 | | `starter` | unlimited (10 included, then billed per listing) | | `custom` | unlimited |  When a customer's active-listing count is above their tier cap, the API returns **`402 Payment Required`** with `error.code = \"listings_limit_exceeded\"` on every route EXCEPT:  - `/v1/health` — uptime probes are never gated. - `/v1/usage/*` — so dashboards can render the over-cap state. - Any `DELETE` — so the customer can trim listings to get back under the cap without paying.  Unlike 429, 402 is NOT a \"wait and retry\" condition — `Retry-After` is not set. The only paths back to 200 are:   1. `DELETE` enough listings to come back under the cap, or   2. Upgrade at `https://repull.dev/dashboard/billing`. The server-side usage cache is 60s, so the first 200 after an upgrade may take up to a minute.  The envelope mirrors `rate_limit_exceeded` for SDK ergonomics: `tier`, `limit`, `active_listings`, `upgrade_url`, plus the standard `code` / `message` / `fix` / `docs_url` / `request_id`.
+
+The version of the OpenAPI document: 1.0.0
+
+Generated by: https://openapi-generator.tech
+Generator version: 7.22.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Repull
+  class ListHotels200Response < ApiModelBase
+    attr_accessor :data
+
+    attr_accessor :pagination
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'data' => :'data',
+        :'pagination' => :'pagination'
+      }
+    end
+
+    # Returns attribute mapping this model knows about
+    def self.acceptable_attribute_map
+      attribute_map
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      acceptable_attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'data' => :'Array<ListHotels200ResponseDataInner>',
+        :'pagination' => :'GetUsageLogs200ResponsePagination'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Repull::ListHotels200Response` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      acceptable_attribute_map = self.class.acceptable_attribute_map
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!acceptable_attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Repull::ListHotels200Response`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'data')
+        if (value = attributes[:'data']).is_a?(Array)
+          self.data = value
+        end
+      end
+
+      if attributes.key?(:'pagination')
+        self.pagination = attributes[:'pagination']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          data == o.data &&
+          pagination == o.pagination
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [data, pagination].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+  end
+
+end