repull 0.2.15 → 0.2.16

data/lib/repull/api/reservations_api.rb

@@ -19,11 +19,81 @@ module Repull
     def initialize(api_client = ApiClient.default)
       @api_client = api_client
     end
+    # Accept a booking request
+    # Accept a pending Airbnb booking request — a reservation with status `pending`, made on a listing without Instant Book. Find them with `GET /v1/reservations?status=pending`. Airbnb expires a request the host has not answered within 24 hours.  Runs the same action as the Vanio dashboard’s Accept button. Airbnb confirms asynchronously: the reservation’s status moves to confirmed, and a `reservation.updated` webhook fires, when Airbnb’s notification lands (usually within seconds). The response reports what Airbnb was asked to do.  **Airbnb only**, and only for listings connected to Airbnb directly: other channels have no request step (`422 channel_not_supported`). A reservation that is not pending is refused before Airbnb is contacted (`409 reservation_not_pending`); one Airbnb says already moved on is `409 request_no_longer_pending`. Neither is worth retrying.  Takes no body.  Send `Idempotency-Key`: a repeat with the same key replays the first response instead of acting twice (a `409 idempotency_key_in_use` while the first is still running). A 5xx, a `429 airbnb_rate_limited` or a `403 connection_reauth_required` is not stored — nothing was done — so retrying with the same key reaches Airbnb again.
+    # @param id [Integer] Repull reservation id (from `GET /v1/reservations?status=pending`) — not the Airbnb confirmation code.
+    # @param [Hash] opts the optional parameters
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged `Idempotency-Status: cached` — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → `409 idempotency_key_in_use`. - Same key with a DIFFERENT payload → `422 idempotency_key_reused`. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status >= 500, `408`, `425` and `429`, and the refusals that happen before anything is done and tell you to fix something outside the request first — `connection_reauth_required`, `listing_inactive`, and the rate/daily limits. Every other answer, including a final refusal such as `422 airbnb_rejected`, is stored and replayed.
+    # @return [AcceptReservationRequest200Response]
+    def accept_reservation_request(id, opts = {})
+      data, _status_code, _headers = accept_reservation_request_with_http_info(id, opts)
+      data
+    end
+
+    # Accept a booking request
+    # Accept a pending Airbnb booking request — a reservation with status `pending`, made on a listing without Instant Book. Find them with `GET /v1/reservations?status=pending`. Airbnb expires a request the host has not answered within 24 hours.  Runs the same action as the Vanio dashboard’s Accept button. Airbnb confirms asynchronously: the reservation’s status moves to confirmed, and a `reservation.updated` webhook fires, when Airbnb’s notification lands (usually within seconds). The response reports what Airbnb was asked to do.  **Airbnb only**, and only for listings connected to Airbnb directly: other channels have no request step (`422 channel_not_supported`). A reservation that is not pending is refused before Airbnb is contacted (`409 reservation_not_pending`); one Airbnb says already moved on is `409 request_no_longer_pending`. Neither is worth retrying.  Takes no body.  Send `Idempotency-Key`: a repeat with the same key replays the first response instead of acting twice (a `409 idempotency_key_in_use` while the first is still running). A 5xx, a `429 airbnb_rate_limited` or a `403 connection_reauth_required` is not stored — nothing was done — so retrying with the same key reaches Airbnb again.
+    # @param id [Integer] Repull reservation id (from `GET /v1/reservations?status=pending`) — not the Airbnb confirmation code.
+    # @param [Hash] opts the optional parameters
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged `Idempotency-Status: cached` — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → `409 idempotency_key_in_use`. - Same key with a DIFFERENT payload → `422 idempotency_key_reused`. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status >= 500, `408`, `425` and `429`, and the refusals that happen before anything is done and tell you to fix something outside the request first — `connection_reauth_required`, `listing_inactive`, and the rate/daily limits. Every other answer, including a final refusal such as `422 airbnb_rejected`, is stored and replayed.
+    # @return [Array<(AcceptReservationRequest200Response, Integer, Hash)>] AcceptReservationRequest200Response data, response status code and response headers
+    def accept_reservation_request_with_http_info(id, opts = {})
+      if @api_client.config.debugging
+        @api_client.config.logger.debug 'Calling API: ReservationsApi.accept_reservation_request ...'
+      end
+      # verify the required parameter 'id' is set
+      if @api_client.config.client_side_validation && id.nil?
+        fail ArgumentError, "Missing the required parameter 'id' when calling ReservationsApi.accept_reservation_request"
+      end
+      if @api_client.config.client_side_validation && !opts[:'idempotency_key'].nil? && opts[:'idempotency_key'].to_s.length > 255
+        fail ArgumentError, 'invalid value for "opts[:"idempotency_key"]" when calling ReservationsApi.accept_reservation_request, the character length must be smaller than or equal to 255.'
+      end
+
+      # resource path
+      local_var_path = '/v1/reservations/{id}/accept'.sub('{id}', CGI.escape(id.to_s))
+
+      # query parameters
+      query_params = opts[:query_params] || {}
+
+      # header parameters
+      header_params = opts[:header_params] || {}
+      # HTTP header 'Accept' (if needed)
+      header_params['Accept'] = @api_client.select_header_accept(['application/json']) unless header_params['Accept']
+      header_params[:'Idempotency-Key'] = opts[:'idempotency_key'] if !opts[:'idempotency_key'].nil?
+
+      # form parameters
+      form_params = opts[:form_params] || {}
+
+      # http body (model)
+      post_body = opts[:debug_body]
+
+      # return_type
+      return_type = opts[:debug_return_type] || 'AcceptReservationRequest200Response'
+
+      # auth_names
+      auth_names = opts[:debug_auth_names] || ['bearerAuth']
+
+      new_options = opts.merge(
+        :operation => :"ReservationsApi.accept_reservation_request",
+        :header_params => header_params,
+        :query_params => query_params,
+        :form_params => form_params,
+        :body => post_body,
+        :auth_names => auth_names,
+        :return_type => return_type
+      )
+
+      data, status_code, headers = @api_client.call_api(:POST, local_var_path, new_options)
+      if @api_client.config.debugging
+        @api_client.config.logger.debug "API called: ReservationsApi#accept_reservation_request\nData: #{data.inspect}\nStatus code: #{status_code}\nHeaders: #{headers}"
+      end
+      return data, status_code, headers
+    end
+
     # Create a reservation
     # Creates a reservation and everything that hangs off one: the guest, the conversation thread, the dashboard item, the calendar block, and the `reservation.created` fan-out that issues the door code and starts the messaging automations.  **Platform is restricted to `direct`, `website` and `owner`.** Reservations on Airbnb, Booking.com and Vrbo are owned by the channel and arrive through sync — creating one here would mint a local booking the channel has never heard of, which then fights the next sync. Create those on the channel.  **Dates are validated** (`YYYY-MM-DD`, and `checkOut` must be after `checkIn`), and an unrecognised field is rejected by name rather than silently ignored.  **This endpoint does not set the price.** There is no `totalPrice` field: the reservation pipeline derives the price breakdown from the property's own rates and overwrites anything supplied, so accepting a total would be taking a value and discarding it. A reservation created here is priced by that engine (`0` when the property has no rates for the range). `currency` IS honoured. Quote a stay with `GET /v1/quotes` before booking if you need the figure up front.  **Availability is NOT checked.** This creates the reservation you asked for even if the dates overlap an existing booking. Call `GET /v1/availability/{propertyId}` first if that matters.  Send `Idempotency-Key` — a network timeout here is exactly the case it exists for: without it, a retry books the guest twice.  Returns `403 listing_inactive` when the listing is inactive. An inactive listing keeps syncing, but cannot be read or changed through the API until it is activated.
     # @param reservation_create_request [ReservationCreateRequest] 
     # @param [Hash] opts the optional parameters
-    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Responses with status &gt;&#x3D; 500 are deliberately not stored, so a server error stays retryable.
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status &gt;&#x3D; 500, &#x60;408&#x60;, &#x60;425&#x60; and &#x60;429&#x60;, and the refusals that happen before anything is done and tell you to fix something outside the request first — &#x60;connection_reauth_required&#x60;, &#x60;listing_inactive&#x60;, and the rate/daily limits. Every other answer, including a final refusal such as &#x60;422 airbnb_rejected&#x60;, is stored and replayed.
     # @return [ReservationCreateResponse]
     def create_reservation(reservation_create_request, opts = {})
       data, _status_code, _headers = create_reservation_with_http_info(reservation_create_request, opts)
@@ -34,7 +104,7 @@ module Repull
     # Creates a reservation and everything that hangs off one: the guest, the conversation thread, the dashboard item, the calendar block, and the &#x60;reservation.created&#x60; fan-out that issues the door code and starts the messaging automations.  **Platform is restricted to &#x60;direct&#x60;, &#x60;website&#x60; and &#x60;owner&#x60;.** Reservations on Airbnb, Booking.com and Vrbo are owned by the channel and arrive through sync — creating one here would mint a local booking the channel has never heard of, which then fights the next sync. Create those on the channel.  **Dates are validated** (&#x60;YYYY-MM-DD&#x60;, and &#x60;checkOut&#x60; must be after &#x60;checkIn&#x60;), and an unrecognised field is rejected by name rather than silently ignored.  **This endpoint does not set the price.** There is no &#x60;totalPrice&#x60; field: the reservation pipeline derives the price breakdown from the property&#39;s own rates and overwrites anything supplied, so accepting a total would be taking a value and discarding it. A reservation created here is priced by that engine (&#x60;0&#x60; when the property has no rates for the range). &#x60;currency&#x60; IS honoured. Quote a stay with &#x60;GET /v1/quotes&#x60; before booking if you need the figure up front.  **Availability is NOT checked.** This creates the reservation you asked for even if the dates overlap an existing booking. Call &#x60;GET /v1/availability/{propertyId}&#x60; first if that matters.  Send &#x60;Idempotency-Key&#x60; — a network timeout here is exactly the case it exists for: without it, a retry books the guest twice.  Returns &#x60;403 listing_inactive&#x60; when the listing is inactive. An inactive listing keeps syncing, but cannot be read or changed through the API until it is activated.
     # @param reservation_create_request [ReservationCreateRequest] 
     # @param [Hash] opts the optional parameters
-    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Responses with status &gt;&#x3D; 500 are deliberately not stored, so a server error stays retryable.
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status &gt;&#x3D; 500, &#x60;408&#x60;, &#x60;425&#x60; and &#x60;429&#x60;, and the refusals that happen before anything is done and tell you to fix something outside the request first — &#x60;connection_reauth_required&#x60;, &#x60;listing_inactive&#x60;, and the rate/daily limits. Every other answer, including a final refusal such as &#x60;422 airbnb_rejected&#x60;, is stored and replayed.
     # @return [Array<(ReservationCreateResponse, Integer, Hash)>] ReservationCreateResponse data, response status code and response headers
     def create_reservation_with_http_info(reservation_create_request, opts = {})
       if @api_client.config.debugging
@@ -94,6 +164,87 @@ module Repull
       return data, status_code, headers
     end
 
+    # Decline a booking request
+    # Decline a pending Airbnb booking request (a reservation with status `pending`; find them with `GET /v1/reservations?status=pending`).  `reason` must be one of Airbnb’s own decline reasons. `message` is required: Airbnb sends it to the guest with the decline (at most 500 characters). It is not defaulted — a canned message would put words in your mouth.  Runs the same action as the Vanio dashboard’s Decline button. Airbnb confirms asynchronously; the reservation’s status moves, and `reservation.updated` fires, when its notification lands. Same channel and status rules as `POST /v1/reservations/{id}/accept`.  Send `Idempotency-Key`: a repeat with the same key replays the first response instead of acting twice (a `409 idempotency_key_in_use` while the first is still running). A 5xx, a `429 airbnb_rate_limited` or a `403 connection_reauth_required` is not stored — nothing was done — so retrying with the same key reaches Airbnb again.
+    # @param id [Integer] Repull reservation id (from &#x60;GET /v1/reservations?status&#x3D;pending&#x60;) — not the Airbnb confirmation code.
+    # @param decline_reservation_request_request [DeclineReservationRequestRequest] 
+    # @param [Hash] opts the optional parameters
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status &gt;&#x3D; 500, &#x60;408&#x60;, &#x60;425&#x60; and &#x60;429&#x60;, and the refusals that happen before anything is done and tell you to fix something outside the request first — &#x60;connection_reauth_required&#x60;, &#x60;listing_inactive&#x60;, and the rate/daily limits. Every other answer, including a final refusal such as &#x60;422 airbnb_rejected&#x60;, is stored and replayed.
+    # @return [AcceptReservationRequest200Response]
+    def decline_reservation_request(id, decline_reservation_request_request, opts = {})
+      data, _status_code, _headers = decline_reservation_request_with_http_info(id, decline_reservation_request_request, opts)
+      data
+    end
+
+    # Decline a booking request
+    # Decline a pending Airbnb booking request (a reservation with status &#x60;pending&#x60;; find them with &#x60;GET /v1/reservations?status&#x3D;pending&#x60;).  &#x60;reason&#x60; must be one of Airbnb’s own decline reasons. &#x60;message&#x60; is required: Airbnb sends it to the guest with the decline (at most 500 characters). It is not defaulted — a canned message would put words in your mouth.  Runs the same action as the Vanio dashboard’s Decline button. Airbnb confirms asynchronously; the reservation’s status moves, and &#x60;reservation.updated&#x60; fires, when its notification lands. Same channel and status rules as &#x60;POST /v1/reservations/{id}/accept&#x60;.  Send &#x60;Idempotency-Key&#x60;: a repeat with the same key replays the first response instead of acting twice (a &#x60;409 idempotency_key_in_use&#x60; while the first is still running). A 5xx, a &#x60;429 airbnb_rate_limited&#x60; or a &#x60;403 connection_reauth_required&#x60; is not stored — nothing was done — so retrying with the same key reaches Airbnb again.
+    # @param id [Integer] Repull reservation id (from &#x60;GET /v1/reservations?status&#x3D;pending&#x60;) — not the Airbnb confirmation code.
+    # @param decline_reservation_request_request [DeclineReservationRequestRequest] 
+    # @param [Hash] opts the optional parameters
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status &gt;&#x3D; 500, &#x60;408&#x60;, &#x60;425&#x60; and &#x60;429&#x60;, and the refusals that happen before anything is done and tell you to fix something outside the request first — &#x60;connection_reauth_required&#x60;, &#x60;listing_inactive&#x60;, and the rate/daily limits. Every other answer, including a final refusal such as &#x60;422 airbnb_rejected&#x60;, is stored and replayed.
+    # @return [Array<(AcceptReservationRequest200Response, Integer, Hash)>] AcceptReservationRequest200Response data, response status code and response headers
+    def decline_reservation_request_with_http_info(id, decline_reservation_request_request, opts = {})
+      if @api_client.config.debugging
+        @api_client.config.logger.debug 'Calling API: ReservationsApi.decline_reservation_request ...'
+      end
+      # verify the required parameter 'id' is set
+      if @api_client.config.client_side_validation && id.nil?
+        fail ArgumentError, "Missing the required parameter 'id' when calling ReservationsApi.decline_reservation_request"
+      end
+      # verify the required parameter 'decline_reservation_request_request' is set
+      if @api_client.config.client_side_validation && decline_reservation_request_request.nil?
+        fail ArgumentError, "Missing the required parameter 'decline_reservation_request_request' when calling ReservationsApi.decline_reservation_request"
+      end
+      if @api_client.config.client_side_validation && !opts[:'idempotency_key'].nil? && opts[:'idempotency_key'].to_s.length > 255
+        fail ArgumentError, 'invalid value for "opts[:"idempotency_key"]" when calling ReservationsApi.decline_reservation_request, the character length must be smaller than or equal to 255.'
+      end
+
+      # resource path
+      local_var_path = '/v1/reservations/{id}/decline'.sub('{id}', CGI.escape(id.to_s))
+
+      # query parameters
+      query_params = opts[:query_params] || {}
+
+      # header parameters
+      header_params = opts[:header_params] || {}
+      # HTTP header 'Accept' (if needed)
+      header_params['Accept'] = @api_client.select_header_accept(['application/json']) unless header_params['Accept']
+      # HTTP header 'Content-Type'
+      content_type = @api_client.select_header_content_type(['application/json'])
+      if !content_type.nil?
+          header_params['Content-Type'] = content_type
+      end
+      header_params[:'Idempotency-Key'] = opts[:'idempotency_key'] if !opts[:'idempotency_key'].nil?
+
+      # form parameters
+      form_params = opts[:form_params] || {}
+
+      # http body (model)
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(decline_reservation_request_request)
+
+      # return_type
+      return_type = opts[:debug_return_type] || 'AcceptReservationRequest200Response'
+
+      # auth_names
+      auth_names = opts[:debug_auth_names] || ['bearerAuth']
+
+      new_options = opts.merge(
+        :operation => :"ReservationsApi.decline_reservation_request",
+        :header_params => header_params,
+        :query_params => query_params,
+        :form_params => form_params,
+        :body => post_body,
+        :auth_names => auth_names,
+        :return_type => return_type
+      )
+
+      data, status_code, headers = @api_client.call_api(:POST, local_var_path, new_options)
+      if @api_client.config.debugging
+        @api_client.config.logger.debug "API called: ReservationsApi#decline_reservation_request\nData: #{data.inspect}\nStatus code: #{status_code}\nHeaders: #{headers}"
+      end
+      return data, status_code, headers
+    end
+
     # Get reservation details
     # Returns the full record for a single reservation, scoped to the authenticated workspace. Response shape is identical to a single row in `GET /v1/reservations` so SDK consumers can use the same type for both. Returns **404** if the id does not exist OR belongs to a different workspace — the API never differentiates the two so caller can't enumerate other workspaces' ids.  Returns `403 listing_inactive` when the listing this resolves to is inactive. An inactive listing keeps syncing, but cannot be read or changed through the API until it is activated.
     # @param id [Integer] Internal Repull reservation ID.
@@ -168,7 +319,7 @@ module Repull
     # @option opts [String] :cursor Opaque cursor returned in the previous response&#39;s &#x60;pagination.nextCursor&#x60;. Omit to fetch the first page.
     # @option opts [Integer] :offset First-class alias for cursor-based pagination. Mutually exclusive with &#x60;cursor&#x60; — passing both returns 422. Accepts integers in &#x60;[0, 10000]&#x60;; deeper walks must use &#x60;cursor&#x60; (constant per-page cost). The response always includes &#x60;pagination.nextCursor&#x60; so consumers can switch from offset → cursor mid-walk for deep pagination without re-keying. (default to 0)
     # @option opts [String] :platform Filter by booking platform
-    # @option opts [String] :status Filter by lifecycle status. **Case-insensitive** — &#x60;confirmed&#x60;, &#x60;Confirmed&#x60;, and &#x60;CONFIRMED&#x60; all match. Each public value expands to the full set of internal sub-states server-side: &#x60;confirmed&#x60; matches &#x60;accept&#x60;/&#x60;confirmed&#x60;/&#x60;modified&#x60;, &#x60;cancelled&#x60; matches every cancellation sub-state (&#x60;cancelled_by_host&#x60;, &#x60;declined&#x60;, &#x60;expired&#x60;, etc.), &#x60;pending&#x60; includes &#x60;inquiry&#x60;/&#x60;awaiting_payment&#x60;. &#x60;completed&#x60; is a derived state — combine &#x60;status&#x3D;confirmed&#x60; with &#x60;check_out_before&#x3D;&lt;today&gt;&#x60; to filter for past stays.
+    # @option opts [String] :status Filter by lifecycle status. **Case-insensitive** — &#x60;confirmed&#x60;, &#x60;Confirmed&#x60;, and &#x60;CONFIRMED&#x60; all match. Each public value expands to the full set of internal sub-states server-side: &#x60;confirmed&#x60; matches &#x60;accept&#x60;/&#x60;confirmed&#x60;/&#x60;modified&#x60;, &#x60;cancelled&#x60; matches every cancellation sub-state (&#x60;cancelled_by_host&#x60;, &#x60;declined&#x60;, &#x60;expired&#x60;, etc.), &#x60;pending&#x60; includes &#x60;inquiry&#x60;/&#x60;awaiting_payment&#x60;. &#x60;completed&#x60; is a derived state — combine &#x60;status&#x3D;confirmed&#x60; with &#x60;check_out_before&#x3D;&lt;today&gt;&#x60; to filter for past stays. &#x60;pending&#x60; is how an Airbnb booking **request** awaiting the host appears — answer it with &#x60;POST /v1/reservations/{id}/accept&#x60; or &#x60;/decline&#x60; before its &#x60;respondBy&#x60;. &#x60;pending&#x60; lists only requests that can still be answered: one the channel already let lapse (Airbnb expires a request 24 hours after the guest asks; no request survives its check-in date) is left out and appears under &#x60;cancelled&#x60; with &#x60;statusDetail: \&quot;request_expired\&quot;&#x60; instead. The stored record is not changed — this is derived when you read it. Airbnb **inquiries** (questions before booking) are not reservations: list them with &#x60;GET /v1/inquiries&#x60;.
     # @option opts [Integer] :listing_id Filter to a single listing
     # @option opts [Date] :check_in_after Check-in date &gt;&#x3D; this value
     # @option opts [Date] :check_in_before Check-in date &lt;&#x3D; this value
@@ -196,7 +347,7 @@ module Repull
     # @option opts [String] :cursor Opaque cursor returned in the previous response&#39;s &#x60;pagination.nextCursor&#x60;. Omit to fetch the first page.
     # @option opts [Integer] :offset First-class alias for cursor-based pagination. Mutually exclusive with &#x60;cursor&#x60; — passing both returns 422. Accepts integers in &#x60;[0, 10000]&#x60;; deeper walks must use &#x60;cursor&#x60; (constant per-page cost). The response always includes &#x60;pagination.nextCursor&#x60; so consumers can switch from offset → cursor mid-walk for deep pagination without re-keying. (default to 0)
     # @option opts [String] :platform Filter by booking platform
-    # @option opts [String] :status Filter by lifecycle status. **Case-insensitive** — &#x60;confirmed&#x60;, &#x60;Confirmed&#x60;, and &#x60;CONFIRMED&#x60; all match. Each public value expands to the full set of internal sub-states server-side: &#x60;confirmed&#x60; matches &#x60;accept&#x60;/&#x60;confirmed&#x60;/&#x60;modified&#x60;, &#x60;cancelled&#x60; matches every cancellation sub-state (&#x60;cancelled_by_host&#x60;, &#x60;declined&#x60;, &#x60;expired&#x60;, etc.), &#x60;pending&#x60; includes &#x60;inquiry&#x60;/&#x60;awaiting_payment&#x60;. &#x60;completed&#x60; is a derived state — combine &#x60;status&#x3D;confirmed&#x60; with &#x60;check_out_before&#x3D;&lt;today&gt;&#x60; to filter for past stays.
+    # @option opts [String] :status Filter by lifecycle status. **Case-insensitive** — &#x60;confirmed&#x60;, &#x60;Confirmed&#x60;, and &#x60;CONFIRMED&#x60; all match. Each public value expands to the full set of internal sub-states server-side: &#x60;confirmed&#x60; matches &#x60;accept&#x60;/&#x60;confirmed&#x60;/&#x60;modified&#x60;, &#x60;cancelled&#x60; matches every cancellation sub-state (&#x60;cancelled_by_host&#x60;, &#x60;declined&#x60;, &#x60;expired&#x60;, etc.), &#x60;pending&#x60; includes &#x60;inquiry&#x60;/&#x60;awaiting_payment&#x60;. &#x60;completed&#x60; is a derived state — combine &#x60;status&#x3D;confirmed&#x60; with &#x60;check_out_before&#x3D;&lt;today&gt;&#x60; to filter for past stays. &#x60;pending&#x60; is how an Airbnb booking **request** awaiting the host appears — answer it with &#x60;POST /v1/reservations/{id}/accept&#x60; or &#x60;/decline&#x60; before its &#x60;respondBy&#x60;. &#x60;pending&#x60; lists only requests that can still be answered: one the channel already let lapse (Airbnb expires a request 24 hours after the guest asks; no request survives its check-in date) is left out and appears under &#x60;cancelled&#x60; with &#x60;statusDetail: \&quot;request_expired\&quot;&#x60; instead. The stored record is not changed — this is derived when you read it. Airbnb **inquiries** (questions before booking) are not reservations: list them with &#x60;GET /v1/inquiries&#x60;.
     # @option opts [Integer] :listing_id Filter to a single listing
     # @option opts [Date] :check_in_after Check-in date &gt;&#x3D; this value
     # @option opts [Date] :check_in_before Check-in date &lt;&#x3D; this value
@@ -299,7 +450,7 @@ module Repull
     # @param id [Integer] Internal Repull reservation ID.
     # @param reservation_update_request [ReservationUpdateRequest] 
     # @param [Hash] opts the optional parameters
-    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Responses with status &gt;&#x3D; 500 are deliberately not stored, so a server error stays retryable.
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status &gt;&#x3D; 500, &#x60;408&#x60;, &#x60;425&#x60; and &#x60;429&#x60;, and the refusals that happen before anything is done and tell you to fix something outside the request first — &#x60;connection_reauth_required&#x60;, &#x60;listing_inactive&#x60;, and the rate/daily limits. Every other answer, including a final refusal such as &#x60;422 airbnb_rejected&#x60;, is stored and replayed.
     # @return [ReservationUpdateResponse]
     def update_reservation(id, reservation_update_request, opts = {})
       data, _status_code, _headers = update_reservation_with_http_info(id, reservation_update_request, opts)
@@ -311,7 +462,7 @@ module Repull
     # @param id [Integer] Internal Repull reservation ID.
     # @param reservation_update_request [ReservationUpdateRequest] 
     # @param [Hash] opts the optional parameters
-    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Responses with status &gt;&#x3D; 500 are deliberately not stored, so a server error stays retryable.
+    # @option opts [String] :idempotency_key Makes a retry of this request safe. Send a unique string (a UUID generated at the point you build the request) and the response is stored for 24 hours: a repeat with the SAME key replays that stored response — tagged &#x60;Idempotency-Status: cached&#x60; — without running the operation again, so no duplicate reservation, guest or guest message is created.  - Same key while the first request is still in flight → &#x60;409 idempotency_key_in_use&#x60;. - Same key with a DIFFERENT payload → &#x60;422 idempotency_key_reused&#x60;. Generate a new key per distinct request; reuse one only when retrying that exact request. - Retryable outcomes are deliberately not stored, so a retry with the same key runs for real: any status &gt;&#x3D; 500, &#x60;408&#x60;, &#x60;425&#x60; and &#x60;429&#x60;, and the refusals that happen before anything is done and tell you to fix something outside the request first — &#x60;connection_reauth_required&#x60;, &#x60;listing_inactive&#x60;, and the rate/daily limits. Every other answer, including a final refusal such as &#x60;422 airbnb_rejected&#x60;, is stored and replayed.
     # @return [Array<(ReservationUpdateResponse, Integer, Hash)>] ReservationUpdateResponse data, response status code and response headers
     def update_reservation_with_http_info(id, reservation_update_request, opts = {})
       if @api_client.config.debugging

data/lib/repull/api/webhooks_api.rb

@@ -547,10 +547,11 @@ module Repull
     end
 
     # Replay webhook delivery
-    # Re-sends the original payload (same eventId, fresh deliveryId, attempt + 1). A delivery about a listing that is inactive now is not re-sent and answers `403 listing_inactive`; activate the listing first.
+    # Re-sends the original payload (same eventId, fresh deliveryId, attempt + 1).  A delivery may be replayed at most **3 times per rolling 60 minutes**; the 4th inside that window answers `409 replay_limit_reached` and names the time the next one is allowed. The limit is charged to the original delivery, so replaying the delivery a replay produced draws on the same budget. It is not a lifetime cap — a delivery that has not been replayed for an hour starts fresh.  A delivery your endpoint already accepted is not re-sent (it would be a duplicate) and answers `409 delivery_already_succeeded`; send `{\"force\": true}` to replay it anyway, which still counts against the limit.  A delivery about a listing that is inactive now is not re-sent and answers `403 listing_inactive`; activate the listing first.
     # @param id [String] 
     # @param delivery_id [String] 
     # @param [Hash] opts the optional parameters
+    # @option opts [ReplayWebhookDeliveryRequest] :replay_webhook_delivery_request 
     # @return [nil]
     def replay_webhook_delivery(id, delivery_id, opts = {})
       replay_webhook_delivery_with_http_info(id, delivery_id, opts)
@@ -558,10 +559,11 @@ module Repull
     end
 
     # Replay webhook delivery
-    # Re-sends the original payload (same eventId, fresh deliveryId, attempt + 1). A delivery about a listing that is inactive now is not re-sent and answers `403 listing_inactive`; activate the listing first.
+    # Re-sends the original payload (same eventId, fresh deliveryId, attempt + 1).  A delivery may be replayed at most **3 times per rolling 60 minutes**; the 4th inside that window answers `409 replay_limit_reached` and names the time the next one is allowed. The limit is charged to the original delivery, so replaying the delivery a replay produced draws on the same budget. It is not a lifetime cap — a delivery that has not been replayed for an hour starts fresh.  A delivery your endpoint already accepted is not re-sent (it would be a duplicate) and answers `409 delivery_already_succeeded`; send `{\"force\": true}` to replay it anyway, which still counts against the limit.  A delivery about a listing that is inactive now is not re-sent and answers `403 listing_inactive`; activate the listing first.
     # @param id [String] 
     # @param delivery_id [String] 
     # @param [Hash] opts the optional parameters
+    # @option opts [ReplayWebhookDeliveryRequest] :replay_webhook_delivery_request 
     # @return [Array<(nil, Integer, Hash)>] nil, response status code and response headers
     def replay_webhook_delivery_with_http_info(id, delivery_id, opts = {})
       if @api_client.config.debugging
@@ -585,12 +587,17 @@ module Repull
       header_params = opts[:header_params] || {}
       # HTTP header 'Accept' (if needed)
       header_params['Accept'] = @api_client.select_header_accept(['application/json']) unless header_params['Accept']
+      # HTTP header 'Content-Type'
+      content_type = @api_client.select_header_content_type(['application/json'])
+      if !content_type.nil?
+          header_params['Content-Type'] = content_type
+      end
 
       # form parameters
       form_params = opts[:form_params] || {}
 
       # http body (model)
-      post_body = opts[:debug_body]
+      post_body = opts[:debug_body] || @api_client.object_to_http_body(opts[:'replay_webhook_delivery_request'])
 
       # return_type
       return_type = opts[:debug_return_type]

data/lib/repull/models/accept_reservation_request200_response.rb

@@ -0,0 +1,321 @@
+=begin
+#Repull API
+
+#The unified API for vacation rental tech. Connect to 50+ PMS platforms and 4 OTA channels through one REST API. Built-in AI operations for guest communication, pricing, and listing optimization.  ## Designed for AI agents Every error response on this API includes machine-parseable fields so an LLM (Claude in MCP, Cursor, Cline, GPT, etc.) can self-recover without escalating to a human: - `error.code` — stable string identifier (e.g. `invalid_params`, `rate_limit_exceeded`) - `error.message` — human-readable cause - `error.fix` — exact recovery steps (e.g. \"Pass `check_in_after` as ISO 8601: `?check_in_after=2026-01-15`\") - `error.docs_url` — link to the canonical write-up at `https://repull.dev/docs/errors/{code}` - `error.request_id` — id to correlate with server-side logs - `error.field` / `error.value_received` / `error.valid_values` / `error.did_you_mean` — when the error is parameter-specific - `error.retry_after` — seconds to wait before retrying (rate-limit + transient upstream)  `Access-Control-Expose-Headers` lists `x-request-id` and the `X-RateLimit-*` family so browsers can read them on cross-origin responses.  ## Quick Start 1. Get an API key at https://repull.dev/dashboard 2. Connect a PMS: `POST /v1/connect/{provider}` 3. List properties: `GET /v1/properties` 4. Get reservations: `GET /v1/reservations`  ## Authentication All requests require a Bearer token: ``` Authorization: Bearer sk_live_YOUR_API_KEY ```  ## Request Correlation (X-Request-ID) Every response carries an `X-Request-ID` header, e.g. `X-Request-ID: req_01HXY...`. Include this id in support tickets and bug reports — we can trace the full request lifecycle (auth, rate limit, handler, downstream calls, log row) from a single id.  You may set the header on the inbound request to forward your own trace id; we will echo it back instead of generating a new one. Accepted format: `^[\\\\w.-]{1,128}$`.  The id is also embedded in error envelopes as `request_id` so server-side log diffs work even when the response headers are stripped by an intermediate proxy.  ## Rate Limits The public API enforces a per-API-key sliding-window rate limit on top of the per-tier monthly + daily-AI quotas.  **Default policy:** 600 requests per 60 seconds, per API key. Sliding window — there is no fixed-minute boundary you can burst across.  Every response includes:  | Header | Meaning | |---|---| | `X-RateLimit-Limit` | Requests permitted in the current window. | | `X-RateLimit-Remaining` | Requests left in the current window after this call. | | `X-RateLimit-Reset` | Unix epoch (seconds) when the next slot opens. | | `X-RateLimit-Policy` | Machine-readable policy descriptor, e.g. `600;w=60`. | | `Retry-After` | Seconds to wait before retrying. **Only present on 429 responses.** |  **On 429 (rate_limit_exceeded):** the response body matches the standard error envelope with `code: \"rate_limit_exceeded\"`, plus `limit`, `window_seconds`, `retry_after`, and `request_id` fields. SDKs MUST honor `Retry-After` and use exponential backoff with jitter on subsequent retries — never a tight loop.  Recommended backoff: ``` sleep_ms = (Retry-After * 1000) + random(0..250) ```  Monthly + daily-AI tier quotas (`free`, `starter`, `custom`) are enforced separately and also surface as 429s; they include `tier`, `scope`, and `resetsAt` fields.  ## Plan Limits (402 — `listings_limit_exceeded`) The Repull API also enforces a per-tier cap on **active listings**:  | Tier | Active listings cap | |---|---| | `free` | 3 | | `starter` | 50 | | `custom` | unlimited |  When a customer's active-listing count is above their tier cap, the API returns **`402 Payment Required`** with `error.code = \"listings_limit_exceeded\"` on every route EXCEPT:  - `/v1/health` — uptime probes are never gated. - `/v1/usage/*` — so dashboards can render the over-cap state. - Any `DELETE` — so the customer can trim listings to get back under the cap without paying.  Unlike 429, 402 is NOT a \"wait and retry\" condition — `Retry-After` is not set. The only paths back to 200 are:   1. `DELETE` enough listings to come back under the cap, or   2. Upgrade at `https://repull.dev/dashboard/billing`. The server-side usage cache is 60s, so the first 200 after an upgrade may take up to a minute.  The envelope mirrors `rate_limit_exceeded` for SDK ergonomics: `tier`, `limit`, `active_listings`, `upgrade_url`, plus the standard `code` / `message` / `fix` / `docs_url` / `request_id`.
+
+The version of the OpenAPI document: 1.0.0
+Contact: ivan@vanio.ai
+Generated by: https://openapi-generator.tech
+Generator version: 7.22.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Repull
+  class AcceptReservationRequest200Response < ApiModelBase
+    attr_accessor :reservation_id
+
+    attr_accessor :confirmation_code
+
+    attr_accessor :channel
+
+    attr_accessor :action
+
+    # What Airbnb was asked to do and did not refuse. The reservation itself moves when Airbnb’s own notification lands, usually within seconds — that is when `reservation.request.updated` fires (`requestStatus` `accepted` or `declined`), plus `reservation.created` for an accepted request.
+    attr_accessor :status
+
+    attr_accessor :decline_reason
+
+    class EnumAttributeValidator
+      attr_reader :datatype
+      attr_reader :allowable_values
+
+      def initialize(datatype, allowable_values)
+        @allowable_values = allowable_values.map do |value|
+          case datatype.to_s
+          when /Integer/i
+            value.to_i
+          when /Float/i
+            value.to_f
+          else
+            value
+          end
+        end
+      end
+
+      def valid?(value)
+        !value || allowable_values.include?(value)
+      end
+    end
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'reservation_id' => :'reservationId',
+        :'confirmation_code' => :'confirmationCode',
+        :'channel' => :'channel',
+        :'action' => :'action',
+        :'status' => :'status',
+        :'decline_reason' => :'declineReason'
+      }
+    end
+
+    # Returns attribute mapping this model knows about
+    def self.acceptable_attribute_map
+      attribute_map
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      acceptable_attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'reservation_id' => :'String',
+        :'confirmation_code' => :'String',
+        :'channel' => :'String',
+        :'action' => :'String',
+        :'status' => :'String',
+        :'decline_reason' => :'String'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+        :'decline_reason'
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Repull::AcceptReservationRequest200Response` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      acceptable_attribute_map = self.class.acceptable_attribute_map
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!acceptable_attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Repull::AcceptReservationRequest200Response`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'reservation_id')
+        self.reservation_id = attributes[:'reservation_id']
+      else
+        self.reservation_id = nil
+      end
+
+      if attributes.key?(:'confirmation_code')
+        self.confirmation_code = attributes[:'confirmation_code']
+      else
+        self.confirmation_code = nil
+      end
+
+      if attributes.key?(:'channel')
+        self.channel = attributes[:'channel']
+      else
+        self.channel = nil
+      end
+
+      if attributes.key?(:'action')
+        self.action = attributes[:'action']
+      else
+        self.action = nil
+      end
+
+      if attributes.key?(:'status')
+        self.status = attributes[:'status']
+      else
+        self.status = nil
+      end
+
+      if attributes.key?(:'decline_reason')
+        self.decline_reason = attributes[:'decline_reason']
+      else
+        self.decline_reason = nil
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      if @reservation_id.nil?
+        invalid_properties.push('invalid value for "reservation_id", reservation_id cannot be nil.')
+      end
+
+      if @confirmation_code.nil?
+        invalid_properties.push('invalid value for "confirmation_code", confirmation_code cannot be nil.')
+      end
+
+      if @channel.nil?
+        invalid_properties.push('invalid value for "channel", channel cannot be nil.')
+      end
+
+      if @action.nil?
+        invalid_properties.push('invalid value for "action", action cannot be nil.')
+      end
+
+      if @status.nil?
+        invalid_properties.push('invalid value for "status", status cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      return false if @reservation_id.nil?
+      return false if @confirmation_code.nil?
+      return false if @channel.nil?
+      channel_validator = EnumAttributeValidator.new('String', ["airbnb"])
+      return false unless channel_validator.valid?(@channel)
+      return false if @action.nil?
+      action_validator = EnumAttributeValidator.new('String', ["accept", "decline"])
+      return false unless action_validator.valid?(@action)
+      return false if @status.nil?
+      status_validator = EnumAttributeValidator.new('String', ["accepted", "declined"])
+      return false unless status_validator.valid?(@status)
+      decline_reason_validator = EnumAttributeValidator.new('String', ["dates_not_available", "not_comfortable", "listing_not_ready", "different_dates_needed", "spam", "other"])
+      return false unless decline_reason_validator.valid?(@decline_reason)
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] reservation_id Value to be assigned
+    def reservation_id=(reservation_id)
+      if reservation_id.nil?
+        fail ArgumentError, 'reservation_id cannot be nil'
+      end
+
+      @reservation_id = reservation_id
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] confirmation_code Value to be assigned
+    def confirmation_code=(confirmation_code)
+      if confirmation_code.nil?
+        fail ArgumentError, 'confirmation_code cannot be nil'
+      end
+
+      @confirmation_code = confirmation_code
+    end
+
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] channel Object to be assigned
+    def channel=(channel)
+      validator = EnumAttributeValidator.new('String', ["airbnb"])
+      unless validator.valid?(channel)
+        fail ArgumentError, "invalid value for \"channel\", must be one of #{validator.allowable_values}."
+      end
+      @channel = channel
+    end
+
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] action Object to be assigned
+    def action=(action)
+      validator = EnumAttributeValidator.new('String', ["accept", "decline"])
+      unless validator.valid?(action)
+        fail ArgumentError, "invalid value for \"action\", must be one of #{validator.allowable_values}."
+      end
+      @action = action
+    end
+
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] status Object to be assigned
+    def status=(status)
+      validator = EnumAttributeValidator.new('String', ["accepted", "declined"])
+      unless validator.valid?(status)
+        fail ArgumentError, "invalid value for \"status\", must be one of #{validator.allowable_values}."
+      end
+      @status = status
+    end
+
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] decline_reason Object to be assigned
+    def decline_reason=(decline_reason)
+      validator = EnumAttributeValidator.new('String', ["dates_not_available", "not_comfortable", "listing_not_ready", "different_dates_needed", "spam", "other"])
+      unless validator.valid?(decline_reason)
+        fail ArgumentError, "invalid value for \"decline_reason\", must be one of #{validator.allowable_values}."
+      end
+      @decline_reason = decline_reason
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          reservation_id == o.reservation_id &&
+          confirmation_code == o.confirmation_code &&
+          channel == o.channel &&
+          action == o.action &&
+          status == o.status &&
+          decline_reason == o.decline_reason
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [reservation_id, confirmation_code, channel, action, status, decline_reason].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+  end
+
+end