redis_on_heroku 0.0.1

data/bin/heroku-redis-server

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+
+`echo "port $PORT" | #{File.expand_path('../redis-server', __FILE__)} -`

data/redis.conf

@@ -0,0 +1,377 @@
+# Redis configuration file example
+
+# Note on units: when memory size is needed, it is possible to specifiy
+# it in the usual form of 1k 5GB 4M and so forth:
+#
+# 1k => 1000 bytes
+# 1kb => 1024 bytes
+# 1m => 1000000 bytes
+# 1mb => 1024*1024 bytes
+# 1g => 1000000000 bytes
+# 1gb => 1024*1024*1024 bytes
+#
+# units are case insensitive so 1GB 1Gb 1gB are all the same.
+
+# By default Redis does not run as a daemon. Use 'yes' if you need it.
+# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
+daemonize no
+
+# When running daemonized, Redis writes a pid file in /var/run/redis.pid by
+# default. You can specify a custom pid file location here.
+pidfile /tmp/redis.pid
+
+# Accept connections on the specified port, default is 6379.
+# If port 0 is specified Redis will not listen on a TCP socket.
+port 6379
+
+# If you want you can bind a single interface, if the bind option is not
+# specified all the interfaces will listen for incoming connections.
+#
+# bind 127.0.0.1
+
+# Specify the path for the unix socket that will be used to listen for
+# incoming connections. There is no default, so Redis will not listen
+# on a unix socket when not specified.
+#
+# unixsocket /tmp/redis.sock
+
+# Close the connection after a client is idle for N seconds (0 to disable)
+timeout 300
+
+# Set server verbosity to 'debug'
+# it can be one of:
+# debug (a lot of information, useful for development/testing)
+# verbose (many rarely useful info, but not a mess like the debug level)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+loglevel verbose
+
+# Specify the log file name. Also 'stdout' can be used to force
+# Redis to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile stdout
+
+# To enable logging to the system logger, just set 'syslog-enabled' to yes,
+# and optionally update the other syslog parameters to suit your needs.
+# syslog-enabled no
+
+# Specify the syslog identity.
+# syslog-ident redis
+
+# Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.
+# syslog-facility local0
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+################################ SNAPSHOTTING  #################################
+#
+# Save the DB on disk:
+#
+#   save <seconds> <changes>
+#
+#   Will save the DB if both the given number of seconds and the given
+#   number of write operations against the DB occurred.
+#
+#   In the example below the behaviour will be to save:
+#   after 900 sec (15 min) if at least 1 key changed
+#   after 300 sec (5 min) if at least 10 keys changed
+#   after 60 sec if at least 10000 keys changed
+#
+#   Note: you can disable saving at all commenting all the "save" lines.
+
+save 900 1
+save 300 10
+save 60 10000
+
+# Compress string objects using LZF when dump .rdb databases?
+# For default that's set to 'yes' as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
+# The filename where to dump the DB
+dbfilename dump.rdb
+
+# The working directory.
+#
+# The DB will be written inside this directory, with the filename specified
+# above using the 'dbfilename' configuration directive.
+# 
+# Also the Append Only File will be created inside this directory.
+# 
+# Note that you must specify a directory here, not a file name.
+dir ./
+
+################################# REPLICATION #################################
+
+# Master-Slave replication. Use slaveof to make a Redis instance a copy of
+# another Redis server. Note that the configuration is local to the slave
+# so for example it is possible to configure the slave to save the DB with a
+# different interval, or to listen to another port, and so on.
+#
+# slaveof <masterip> <masterport>
+
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the slave to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the slave request.
+#
+# masterauth <master-password>
+
+# When a slave lost the connection with the master, or when the replication
+# is still in progress, the slave can act in two different ways:
+#
+# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
+#    still reply to client requests, possibly with out of data data, or the
+#    data set may just be empty if this is the first synchronization.
+#
+# 2) if slave-serve-stale data is set to 'no' the slave will reply with
+#    an error "SYNC with master in progress" to all the kind of commands
+#    but to INFO and SLAVEOF.
+#
+slave-serve-stale-data yes
+
+################################## SECURITY ###################################
+
+# Require clients to issue AUTH <PASSWORD> before processing any other
+# commands.  This might be useful in environments in which you do not trust
+# others with access to the host running redis-server.
+#
+# This should stay commented out for backward compatibility and because most
+# people do not need auth (e.g. they run their own servers).
+# 
+# Warning: since Redis is pretty fast an outside user can try up to
+# 150k passwords per second against a good box. This means that you should
+# use a very strong password otherwise it will be very easy to break.
+#
+# requirepass foobared
+
+# Command renaming.
+#
+# It is possilbe to change the name of dangerous commands in a shared
+# environment. For instance the CONFIG command may be renamed into something
+# of hard to guess so that it will be still available for internal-use
+# tools but not available for general clients.
+#
+# Example:
+#
+# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
+#
+# It is also possilbe to completely kill a command renaming it into
+# an empty string:
+#
+# rename-command CONFIG ""
+
+################################### LIMITS ####################################
+
+# Set the max number of connected clients at the same time. By default there
+# is no limit, and it's up to the number of file descriptors the Redis process
+# is able to open. The special value '0' means no limits.
+# Once the limit is reached Redis will close all the new connections sending
+# an error 'max number of clients reached'.
+#
+# maxclients 128
+
+# Don't use more memory than the specified amount of bytes.
+# When the memory limit is reached Redis will try to remove keys with an
+# EXPIRE set. It will try to start freeing keys that are going to expire
+# in little time and preserve keys with a longer time to live.
+# Redis will also try to remove objects from free lists if possible.
+#
+# If all this fails, Redis will start to reply with errors to commands
+# that will use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to most read-only commands like GET.
+#
+# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
+# 'state' server or cache, not as a real DB. When Redis is used as a real
+# database the memory usage will grow over the weeks, it will be obvious if
+# it is going to use too much memory in the long run, and you'll have the time
+# to upgrade. With maxmemory after the limit is reached you'll start to get
+# errors for write operations, and this may even lead to DB inconsistency.
+#
+# maxmemory <bytes>
+
+# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
+# is reached? You can select among five behavior:
+# 
+# volatile-lru -> remove the key with an expire set using an LRU algorithm
+# allkeys-lru -> remove any key accordingly to the LRU algorithm
+# volatile-random -> remove a random key with an expire set
+# allkeys->random -> remove a random key, any key
+# volatile-ttl -> remove the key with the nearest expire time (minor TTL)
+# noeviction -> don't expire at all, just return an error on write operations
+# 
+# Note: with all the kind of policies, Redis will return an error on write
+#       operations, when there are not suitable keys for eviction.
+#
+#       At the date of writing this commands are: set setnx setex append
+#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
+#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
+#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
+#       getset mset msetnx exec sort
+#
+# The default is:
+#
+# maxmemory-policy volatile-lru
+
+# LRU and minimal TTL algorithms are not precise algorithms but approximated
+# algorithms (in order to save memory), so you can select as well the sample
+# size to check. For instance for default Redis will check three keys and
+# pick the one that was used less recently, you can change the sample size
+# using the following configuration directive.
+#
+# maxmemory-samples 3
+
+############################## APPEND ONLY MODE ###############################
+
+# By default Redis asynchronously dumps the dataset on disk. If you can live
+# with the idea that the latest records will be lost if something like a crash
+# happens this is the preferred way to run Redis. If instead you care a lot
+# about your data and don't want to that a single record can get lost you should
+# enable the append only mode: when this mode is enabled Redis will append
+# every write operation received in the file appendonly.aof. This file will
+# be read on startup in order to rebuild the full dataset in memory.
+#
+# Note that you can have both the async dumps and the append only file if you
+# like (you have to comment the "save" statements above to disable the dumps).
+# Still if append only mode is enabled Redis will load the data from the
+# log file at startup ignoring the dump.rdb file.
+#
+# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
+# log file in background when it gets too big.
+
+appendonly no
+
+# The name of the append only file (default: "appendonly.aof")
+# appendfilename appendonly.aof
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead to wait for more data in the output buffer. Some OS will really flush 
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log . Slow, Safest.
+# everysec: fsync only if one second passed since the last fsync. Compromise.
+#
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".
+
+# appendfsync always
+appendfsync everysec
+# appendfsync no
+
+# When the AOF fsync policy is set to always or everysec, and a background
+# saving process (a background save or AOF log background rewriting) is
+# performing a lot of I/O against the disk, in some Linux configurations
+# Redis may block too long on the fsync() call. Note that there is no fix for
+# this currently, as even performing fsync in a different thread will block
+# our synchronous write(2) call.
+#
+# In order to mitigate this problem it's possible to use the following option
+# that will prevent fsync() from being called in the main process while a
+# BGSAVE or BGREWRITEAOF is in progress.
+#
+# This means that while another child is saving the durability of Redis is
+# the same as "appendfsync none", that in pratical terms means that it is
+# possible to lost up to 30 seconds of log in the worst scenario (with the
+# default Linux settings).
+# 
+# If you have latency problems turn this to "yes". Otherwise leave it as
+# "no" that is the safest pick from the point of view of durability.
+no-appendfsync-on-rewrite no
+
+#################################### DISK STORE ###############################
+
+# When disk store is active Redis works as an on-disk database, where memory
+# is only used as a object cache.
+#
+# This mode is good for datasets that are bigger than memory, and in general
+# when you want to trade speed for:
+#
+#  - less memory used
+#  - immediate server restart
+#  - per key durability, without need for backgrond savig
+#
+# On the other hand, with disk store enabled MULTI/EXEC are no longer
+# transactional from the point of view of the persistence on disk, that is,
+# Redis transactions will still guarantee that commands are either processed
+# all or nothing, but there is no guarantee that all the keys are flushed
+# on disk in an atomic way.
+#
+# Of course with disk store enabled Redis is not as fast as it is when
+# working with just the memory back end.
+
+diskstore-enabled no
+diskstore-path redis.ds
+cache-max-memory 0
+cache-flush-delay 0
+
+############################### ADVANCED CONFIG ###############################
+
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 512
+hash-max-zipmap-value 64
+
+# Similarly to hashes, small lists are also encoded in a special way in order
+# to save a lot of space. The special representation is only used when
+# you are under the following limits:
+list-max-ziplist-entries 512
+list-max-ziplist-value 64
+
+# Sets have a special encoding in just one case: when a set is composed
+# of just strings that happens to be integers in radix 10 in the range
+# of 64 bit signed integers.
+# The following configuration setting sets the limit in the size of the
+# set in order to use this special memory saving encoding.
+set-max-intset-entries 512
+
+# Similarly to hashes and lists, sorted sets are also specially encoded in
+# order to save a lot of space. This encoding is only used when the length and
+# elements of a sorted set are below the following limits:
+zset-max-ziplist-entries 128
+zset-max-ziplist-value 64
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+# 
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here.  This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings.  Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf

metadata

@@ -0,0 +1,74 @@
+--- !ruby/object:Gem::Specification 
+name: redis_on_heroku
+version: !ruby/object:Gem::Version 
+  hash: 29
+  prerelease: false
+  segments: 
+  - 0
+  - 0
+  - 1
+  version: 0.0.1
+platform: ruby
+authors: 
+- Chris McClelland
+autorequire: 
+bindir: bin
+cert_chain: []
+
+date: 2010-03-11 00:00:00 +00:00
+default_executable: heroku-redis-server
+dependencies: []
+
+description: Redis on heroku -- without relying on external services.
+email: 
+- gondaba@gondaba.com
+executables: 
+- heroku-redis-server
+extensions: []
+
+extra_rdoc_files: []
+
+files: 
+- redis.conf
+- bin/redis-benchmark
+- bin/redis-check-aof
+- bin/redis-check-dump
+- bin/redis-cli
+- bin/redis-server
+- bin/heroku-redis-server
+has_rdoc: true
+homepage: http://github.com/chrismcc/redis_on_heroku
+licenses: []
+
+post_install_message: 
+rdoc_options: 
+- --charset=UTF-8
+require_paths: 
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement 
+  none: false
+  requirements: 
+  - - ">="
+    - !ruby/object:Gem::Version 
+      hash: 3
+      segments: 
+      - 0
+      version: "0"
+required_rubygems_version: !ruby/object:Gem::Requirement 
+  none: false
+  requirements: 
+  - - ">="
+    - !ruby/object:Gem::Version 
+      hash: 3
+      segments: 
+      - 0
+      version: "0"
+requirements: []
+
+rubyforge_project: 
+rubygems_version: 1.3.7
+signing_key: 
+specification_version: 3
+summary: Redis on heroku
+test_files: []
+