redis-client 0.2.0 → 0.4.0

data/ext/redis_client/hiredis/vendor/hiredis.h

@@ -1,336 +0,0 @@
-/*
- * Copyright (c) 2009-2011, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2010-2014, Pieter Noordhuis <pcnoordhuis at gmail dot com>
- * Copyright (c) 2015, Matt Stancliff <matt at genges dot com>,
- *                     Jan-Erik Rediger <janerik at fnordig dot com>
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- *   * Redistributions of source code must retain the above copyright notice,
- *     this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *   * Neither the name of Redis nor the names of its contributors may be used
- *     to endorse or promote products derived from this software without
- *     specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __HIREDIS_H
-#define __HIREDIS_H
-#include "read.h"
-#include <stdarg.h> /* for va_list */
-#ifndef _MSC_VER
-#include <sys/time.h> /* for struct timeval */
-#else
-struct timeval; /* forward declaration */
-typedef long long ssize_t;
-#endif
-#include <stdint.h> /* uintXX_t, etc */
-#include "sds.h" /* for sds */
-#include "alloc.h" /* for allocation wrappers */
-
-#define HIREDIS_MAJOR 1
-#define HIREDIS_MINOR 0
-#define HIREDIS_PATCH 2
-#define HIREDIS_SONAME 1.0.0
-
-/* Connection type can be blocking or non-blocking and is set in the
- * least significant bit of the flags field in redisContext. */
-#define REDIS_BLOCK 0x1
-
-/* Connection may be disconnected before being free'd. The second bit
- * in the flags field is set when the context is connected. */
-#define REDIS_CONNECTED 0x2
-
-/* The async API might try to disconnect cleanly and flush the output
- * buffer and read all subsequent replies before disconnecting.
- * This flag means no new commands can come in and the connection
- * should be terminated once all replies have been read. */
-#define REDIS_DISCONNECTING 0x4
-
-/* Flag specific to the async API which means that the context should be clean
- * up as soon as possible. */
-#define REDIS_FREEING 0x8
-
-/* Flag that is set when an async callback is executed. */
-#define REDIS_IN_CALLBACK 0x10
-
-/* Flag that is set when the async context has one or more subscriptions. */
-#define REDIS_SUBSCRIBED 0x20
-
-/* Flag that is set when monitor mode is active */
-#define REDIS_MONITORING 0x40
-
-/* Flag that is set when we should set SO_REUSEADDR before calling bind() */
-#define REDIS_REUSEADDR 0x80
-
-/**
- * Flag that indicates the user does not want the context to
- * be automatically freed upon error
- */
-#define REDIS_NO_AUTO_FREE 0x200
-
-#define REDIS_KEEPALIVE_INTERVAL 15 /* seconds */
-
-/* number of times we retry to connect in the case of EADDRNOTAVAIL and
- * SO_REUSEADDR is being used. */
-#define REDIS_CONNECT_RETRIES  10
-
-/* Forward declarations for structs defined elsewhere */
-struct redisAsyncContext;
-struct redisContext;
-
-/* RESP3 push helpers and callback prototypes */
-#define redisIsPushReply(r) (((redisReply*)(r))->type == REDIS_REPLY_PUSH)
-typedef void (redisPushFn)(void *, void *);
-typedef void (redisAsyncPushFn)(struct redisAsyncContext *, void *);
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* This is the reply object returned by redisCommand() */
-typedef struct redisReply {
-    int type; /* REDIS_REPLY_* */
-    long long integer; /* The integer when type is REDIS_REPLY_INTEGER */
-    double dval; /* The double when type is REDIS_REPLY_DOUBLE */
-    size_t len; /* Length of string */
-    char *str; /* Used for REDIS_REPLY_ERROR, REDIS_REPLY_STRING
-                  REDIS_REPLY_VERB, and REDIS_REPLY_DOUBLE (in additional to dval). */
-    char vtype[4]; /* Used for REDIS_REPLY_VERB, contains the null
-                      terminated 3 character content type, such as "txt". */
-    size_t elements; /* number of elements, for REDIS_REPLY_ARRAY */
-    struct redisReply **element; /* elements vector for REDIS_REPLY_ARRAY */
-} redisReply;
-
-redisReader *redisReaderCreate(void);
-
-/* Function to free the reply objects hiredis returns by default. */
-void freeReplyObject(void *reply);
-
-/* Functions to format a command according to the protocol. */
-int redisvFormatCommand(char **target, const char *format, va_list ap);
-int redisFormatCommand(char **target, const char *format, ...);
-int redisFormatCommandArgv(char **target, int argc, const char **argv, const size_t *argvlen);
-int redisFormatSdsCommandArgv(sds *target, int argc, const char ** argv, const size_t *argvlen);
-void redisFreeCommand(char *cmd);
-void redisFreeSdsCommand(sds cmd);
-
-enum redisConnectionType {
-    REDIS_CONN_TCP,
-    REDIS_CONN_UNIX,
-    REDIS_CONN_USERFD
-};
-
-struct redisSsl;
-
-#define REDIS_OPT_NONBLOCK 0x01
-#define REDIS_OPT_REUSEADDR 0x02
-
-/**
- * Don't automatically free the async object on a connection failure,
- * or other implicit conditions. Only free on an explicit call to disconnect() or free()
- */
-#define REDIS_OPT_NOAUTOFREE 0x04
-
-/* Don't automatically intercept and free RESP3 PUSH replies. */
-#define REDIS_OPT_NO_PUSH_AUTOFREE 0x08
-
-/* In Unix systems a file descriptor is a regular signed int, with -1
- * representing an invalid descriptor. In Windows it is a SOCKET
- * (32- or 64-bit unsigned integer depending on the architecture), where
- * all bits set (~0) is INVALID_SOCKET.  */
-#ifndef _WIN32
-typedef int redisFD;
-#define REDIS_INVALID_FD -1
-#else
-#ifdef _WIN64
-typedef unsigned long long redisFD; /* SOCKET = 64-bit UINT_PTR */
-#else
-typedef unsigned long redisFD;      /* SOCKET = 32-bit UINT_PTR */
-#endif
-#define REDIS_INVALID_FD ((redisFD)(~0)) /* INVALID_SOCKET */
-#endif
-
-typedef struct {
-    /*
-     * the type of connection to use. This also indicates which
-     * `endpoint` member field to use
-     */
-    int type;
-    /* bit field of REDIS_OPT_xxx */
-    int options;
-    /* timeout value for connect operation. If NULL, no timeout is used */
-    const struct timeval *connect_timeout;
-    /* timeout value for commands. If NULL, no timeout is used.  This can be
-     * updated at runtime with redisSetTimeout/redisAsyncSetTimeout. */
-    const struct timeval *command_timeout;
-    union {
-        /** use this field for tcp/ip connections */
-        struct {
-            const char *source_addr;
-            const char *ip;
-            int port;
-        } tcp;
-        /** use this field for unix domain sockets */
-        const char *unix_socket;
-        /**
-         * use this field to have hiredis operate an already-open
-         * file descriptor */
-        redisFD fd;
-    } endpoint;
-
-    /* Optional user defined data/destructor */
-    void *privdata;
-    void (*free_privdata)(void *);
-
-    /* A user defined PUSH message callback */
-    redisPushFn *push_cb;
-    redisAsyncPushFn *async_push_cb;
-} redisOptions;
-
-/**
- * Helper macros to initialize options to their specified fields.
- */
-#define REDIS_OPTIONS_SET_TCP(opts, ip_, port_) \
-    (opts)->type = REDIS_CONN_TCP; \
-    (opts)->endpoint.tcp.ip = ip_; \
-    (opts)->endpoint.tcp.port = port_;
-
-#define REDIS_OPTIONS_SET_UNIX(opts, path) \
-    (opts)->type = REDIS_CONN_UNIX;        \
-    (opts)->endpoint.unix_socket = path;
-
-#define REDIS_OPTIONS_SET_PRIVDATA(opts, data, dtor) \
-    (opts)->privdata = data;                         \
-    (opts)->free_privdata = dtor;                    \
-
-typedef struct redisContextFuncs {
-    void (*free_privctx)(void *);
-    void (*async_read)(struct redisAsyncContext *);
-    void (*async_write)(struct redisAsyncContext *);
-    ssize_t (*read)(struct redisContext *, char *, size_t);
-    ssize_t (*write)(struct redisContext *);
-} redisContextFuncs;
-
-/* Context for a connection to Redis */
-typedef struct redisContext {
-    const redisContextFuncs *funcs;   /* Function table */
-
-    int err; /* Error flags, 0 when there is no error */
-    char errstr[128]; /* String representation of error when applicable */
-    redisFD fd;
-    int flags;
-    char *obuf; /* Write buffer */
-    redisReader *reader; /* Protocol reader */
-
-    enum redisConnectionType connection_type;
-    struct timeval *connect_timeout;
-    struct timeval *command_timeout;
-
-    struct {
-        char *host;
-        char *source_addr;
-        int port;
-    } tcp;
-
-    struct {
-        char *path;
-    } unix_sock;
-
-    /* For non-blocking connect */
-    struct sockadr *saddr;
-    size_t addrlen;
-
-    /* Optional data and corresponding destructor users can use to provide
-     * context to a given redisContext.  Not used by hiredis. */
-    void *privdata;
-    void (*free_privdata)(void *);
-
-    /* Internal context pointer presently used by hiredis to manage
-     * SSL connections. */
-    void *privctx;
-
-    /* An optional RESP3 PUSH handler */
-    redisPushFn *push_cb;
-} redisContext;
-
-redisContext *redisConnectWithOptions(const redisOptions *options);
-redisContext *redisConnect(const char *ip, int port);
-redisContext *redisConnectWithTimeout(const char *ip, int port, const struct timeval tv);
-redisContext *redisConnectNonBlock(const char *ip, int port);
-redisContext *redisConnectBindNonBlock(const char *ip, int port,
-                                       const char *source_addr);
-redisContext *redisConnectBindNonBlockWithReuse(const char *ip, int port,
-                                                const char *source_addr);
-redisContext *redisConnectUnix(const char *path);
-redisContext *redisConnectUnixWithTimeout(const char *path, const struct timeval tv);
-redisContext *redisConnectUnixNonBlock(const char *path);
-redisContext *redisConnectFd(redisFD fd);
-
-/**
- * Reconnect the given context using the saved information.
- *
- * This re-uses the exact same connect options as in the initial connection.
- * host, ip (or path), timeout and bind address are reused,
- * flags are used unmodified from the existing context.
- *
- * Returns REDIS_OK on successful connect or REDIS_ERR otherwise.
- */
-int redisReconnect(redisContext *c);
-
-redisPushFn *redisSetPushCallback(redisContext *c, redisPushFn *fn);
-int redisSetTimeout(redisContext *c, const struct timeval tv);
-int redisEnableKeepAlive(redisContext *c);
-void redisFree(redisContext *c);
-redisFD redisFreeKeepFd(redisContext *c);
-int redisBufferRead(redisContext *c);
-int redisBufferWrite(redisContext *c, int *done);
-
-/* In a blocking context, this function first checks if there are unconsumed
- * replies to return and returns one if so. Otherwise, it flushes the output
- * buffer to the socket and reads until it has a reply. In a non-blocking
- * context, it will return unconsumed replies until there are no more. */
-int redisGetReply(redisContext *c, void **reply);
-int redisGetReplyFromReader(redisContext *c, void **reply);
-
-/* Write a formatted command to the output buffer. Use these functions in blocking mode
- * to get a pipeline of commands. */
-int redisAppendFormattedCommand(redisContext *c, const char *cmd, size_t len);
-
-/* Write a command to the output buffer. Use these functions in blocking mode
- * to get a pipeline of commands. */
-int redisvAppendCommand(redisContext *c, const char *format, va_list ap);
-int redisAppendCommand(redisContext *c, const char *format, ...);
-int redisAppendCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
-
-/* Issue a command to Redis. In a blocking context, it is identical to calling
- * redisAppendCommand, followed by redisGetReply. The function will return
- * NULL if there was an error in performing the request, otherwise it will
- * return the reply. In a non-blocking context, it is identical to calling
- * only redisAppendCommand and will always return NULL. */
-void *redisvCommand(redisContext *c, const char *format, va_list ap);
-void *redisCommand(redisContext *c, const char *format, ...);
-void *redisCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

data/ext/redis_client/hiredis/vendor/hiredis.pc.in

@@ -1,12 +0,0 @@
-prefix=@CMAKE_INSTALL_PREFIX@
-install_libdir=@CMAKE_INSTALL_LIBDIR@
-exec_prefix=${prefix}
-libdir=${exec_prefix}/${install_libdir}
-includedir=${prefix}/include
-pkgincludedir=${includedir}/hiredis
-
-Name: hiredis
-Description: Minimalistic C client library for Redis.
-Version: @PROJECT_VERSION@
-Libs: -L${libdir} -lhiredis
-Cflags: -I${pkgincludedir} -D_FILE_OFFSET_BITS=64

data/ext/redis_client/hiredis/vendor/hiredis_ssl-config.cmake.in

@@ -1,13 +0,0 @@
-@PACKAGE_INIT@
-
-set_and_check(hiredis_ssl_INCLUDEDIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
-
-IF (NOT TARGET hiredis::hiredis_ssl)
-	INCLUDE(${CMAKE_CURRENT_LIST_DIR}/hiredis_ssl-targets.cmake)
-ENDIF()
-
-SET(hiredis_ssl_LIBRARIES hiredis::hiredis_ssl)
-SET(hiredis_ssl_INCLUDE_DIRS ${hiredis_ssl_INCLUDEDIR})
-
-check_required_components(hiredis_ssl)
-

data/ext/redis_client/hiredis/vendor/hiredis_ssl.h

@@ -1,157 +0,0 @@
-
-/*
- * Copyright (c) 2019, Redis Labs
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- *   * Redistributions of source code must retain the above copyright notice,
- *     this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *   * Neither the name of Redis nor the names of its contributors may be used
- *     to endorse or promote products derived from this software without
- *     specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __HIREDIS_SSL_H
-#define __HIREDIS_SSL_H
-
-#include <openssl/ssl.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* This is the underlying struct for SSL in ssl.h, which is not included to
- * keep build dependencies short here.
- */
-struct ssl_st;
-
-/* A wrapper around OpenSSL SSL_CTX to allow easy SSL use without directly
- * calling OpenSSL.
- */
-typedef struct redisSSLContext redisSSLContext;
-
-/* The SSL connection context is attached to SSL/TLS connections as a privdata. */
-typedef struct redisSSL {
-    /**
-     * OpenSSL SSL object.
-     */
-    SSL *ssl;
-
-    /**
-     * SSL_write() requires to be called again with the same arguments it was
-     * previously called with in the event of an SSL_read/SSL_write situation
-     */
-    size_t lastLen;
-
-    /** Whether the SSL layer requires read (possibly before a write) */
-    int wantRead;
-
-    /**
-     * Whether a write was requested prior to a read. If set, the write()
-     * should resume whenever a read takes place, if possible
-     */
-    int pendingWrite;
-} redisSSL;
-
-/**
- * Initialization errors that redisCreateSSLContext() may return.
- */
-
-typedef enum {
-    REDIS_SSL_CTX_NONE = 0,                     /* No Error */
-    REDIS_SSL_CTX_CREATE_FAILED,                /* Failed to create OpenSSL SSL_CTX */
-    REDIS_SSL_CTX_CERT_KEY_REQUIRED,            /* Client cert and key must both be specified or skipped */
-    REDIS_SSL_CTX_CA_CERT_LOAD_FAILED,          /* Failed to load CA Certificate or CA Path */
-    REDIS_SSL_CTX_CLIENT_CERT_LOAD_FAILED,      /* Failed to load client certificate */
-    REDIS_SSL_CTX_PRIVATE_KEY_LOAD_FAILED       /* Failed to load private key */
-} redisSSLContextError;
-
-/**
- * Return the error message corresponding with the specified error code.
- */
-
-const char *redisSSLContextGetError(redisSSLContextError error);
-
-/**
- * Helper function to initialize the OpenSSL library.
- *
- * OpenSSL requires one-time initialization before it can be used. Callers should
- * call this function only once, and only if OpenSSL is not directly initialized
- * elsewhere.
- */
-int redisInitOpenSSL(void);
-
-/**
- * Helper function to initialize an OpenSSL context that can be used
- * to initiate SSL connections.
- *
- * cacert_filename is an optional name of a CA certificate/bundle file to load
- * and use for validation.
- *
- * capath is an optional directory path where trusted CA certificate files are
- * stored in an OpenSSL-compatible structure.
- *
- * cert_filename and private_key_filename are optional names of a client side
- * certificate and private key files to use for authentication. They need to
- * be both specified or omitted.
- *
- * server_name is an optional and will be used as a server name indication
- * (SNI) TLS extension.
- *
- * If error is non-null, it will be populated in case the context creation fails
- * (returning a NULL).
- */
-
-redisSSLContext *redisCreateSSLContext(const char *cacert_filename, const char *capath,
-        const char *cert_filename, const char *private_key_filename,
-        const char *server_name, redisSSLContextError *error);
-
-/**
- * Free a previously created OpenSSL context.
- */
-void redisFreeSSLContext(redisSSLContext *redis_ssl_ctx);
-
-/**
- * Initiate SSL on an existing redisContext.
- *
- * This is similar to redisInitiateSSL() but does not require the caller
- * to directly interact with OpenSSL, and instead uses a redisSSLContext
- * previously created using redisCreateSSLContext().
- */
-
-int redisInitiateSSLWithContext(redisContext *c, redisSSLContext *redis_ssl_ctx);
-
-int redisInitiateSSLContinue(redisContext *c);
-
-/**
- * Initiate SSL/TLS negotiation on a provided OpenSSL SSL object.
- */
-
-int redisInitiateSSL(redisContext *c, struct ssl_st *ssl);
-
-
-redisSSL *redisGetSSLSocket(redisContext *c);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif  /* __HIREDIS_SSL_H */

data/ext/redis_client/hiredis/vendor/hiredis_ssl.pc.in

@@ -1,12 +0,0 @@
-prefix=@CMAKE_INSTALL_PREFIX@
-exec_prefix=${prefix}
-libdir=${exec_prefix}/lib
-includedir=${prefix}/include
-pkgincludedir=${includedir}/hiredis
-
-Name: hiredis_ssl
-Description: SSL Support for hiredis.
-Version: @PROJECT_VERSION@
-Requires: hiredis
-Libs: -L${libdir} -lhiredis_ssl
-Libs.private: -lssl -lcrypto