rbt 0.15.1 → 0.16.30

data/doc/todo/numbered_todo_entries_for_the_RBT_project.md

@@ -1,237 +1,534 @@
 --------------------------------------------------------------------------------
-(41) → Expand RBT.action() until we have listed ALL actions there.
+(1) → reinstate handling of problems and errors, but in a two-step
+      way.
+--------------------------------------------------------------------------------
+(192) → We should test updating glibc on some computer system - anywhere.
+      Possibly for this, we also need a chrooted environment.
+      I guess it is best to simply copy /Depot/Chroot/home/Programs/
+      onto a usb stick, then transfer it downstairs.
+      Ideally for this we should have compiled all new programs already
+      as-is.
+--------------------------------------------------------------------------------
+(207) → installation_steps:
+      - make
+      - make install DESTDIR=$MY_PROGRAMS/Ncompress/PROGRAM_VERSION
 
-      Evaluate at some point in the future when this will be
-      achieved.
+      ^^^^ installation steps seems
+      to be bugged
+      debug this
+      ncompress has that problem right now
 
-      ^^^ continue here. All bin/ files are now executable, since as
-      of September 2022. But we probably should add even more
-      actions here, in particular several troublemaking
-      steps within RBT::Compile.
-      Then also look at menu.rb of class RBT::Compile to see which
-      individual tasks can be made "actionable" still.
-      Once that is all done, perhaps in 2023 or so,
-      remove this todo entry here.
-      Ok, bin/ is now complete, we must go through menu() still
-      and see.
 
 --------------------------------------------------------------------------------
-(1) → Handle these commandline instructions, which originated from the old
-      class RBT::Commandline but are not yet completely ported:
-# rbt --download=htop # <- implemented \o/
-# rbt --set-source-dir=/Files/Archive/
+(182) → Re-enable: install_every_package
+# installs every package in PKG_DIR, uses method do_real_install to
+# really install a pkg.
 #
-# rbt --download htop
-# ^^^ all the above cases work now.
-      rbt --download glibc-2.28
-      rbt --download-into-proper-directory htop
-      rbt --download-proper htop
-      rbt --download-into-dir htop
-      rbt pin htop
-      rbt --set-source-dir /Files/Archive/
-      opnn; RBT.permanently_set_source_directory($3.to_s.dup) { :be_verbose }
+# Invoke this method like so:
+#
+#   ry --install-every-package
+      def install_every_package
+      get_file_listing(@pkg_dir, true).each { |tmp|
+      do_real_install(tmp)
+      }
+      end
+--------------------------------------------------------------------------------
+(184) → Working with an existing binary should work as-is without
+      leading to compile problems. in
+      bin/ hmmm
+      we may have to infer things. Well actually...
+      11111^^^
+      (2) Must transition into more actions.
+      ^^^ make each compile task that makes sense an
+      action; perhaps prefix this via:
+      RBT.actions(:compile_step1)
+      or something like this hmm.
+--------------------------------------------------------------------------------
+(185) → expand errors.yml
       ^^^
 --------------------------------------------------------------------------------
-(2) → Continue porting old RBT code to the new one.
+(186) → Fix this:
+      → Introduce:
+      ry glib --version=2.18.3 --compile-version=2.16.33_TEST
+      ry glib@2.18.3 --compile-version=2.16.33_TEST
 --------------------------------------------------------------------------------
-(3) → Walk throgh homebrew and integrate what is missing for RBT.
-      Remove this point at the latest in 2025, though.
+(187) → CLANG support:
+      add a way to automatically use clang for llvm ...
+      via rbt... not sure how but it would be simpler.
+      That works sort of but we need more experience here,
+      since it does not seem to work perfectly well.
+      (94) → http://developer.ubuntu.com/
+      ^^^ wenn das grundgerüst hier funktioniert, die Funktionalität
+      von RBT in eine ruby-gtk app reinpacken und auch dort publishen.
+      ah ja, add ruby-gtk support
 --------------------------------------------------------------------------------
-(4) → enable in rbt a way to download a remote package
-      that has ... well binutils and so forth
-      from which we can then bootstrap the compile
-      environment, in the event that some error happens
+(188) → make -f Makefile.linux
+      ^^^ this supprting
 --------------------------------------------------------------------------------
-(5) → one day add a meta-action:
-      :build_lfs_from_scratch
-      AND
-      :build_blfs_from_scratch
-      This shall create all necessary steps.
-      We already describe some of the steps, but not all.
+(189) → Implementiere folgendes (zur zeit geht das teilweise...
+      all_versions fungiert als compile_all_versions):
+      ry glib all_versions
+      ry glib all_versions ntrad
+      all_versions instruiert das man eben alle Versionen mittels
+      ntrad kompiliert.
+      ^^^ this works but requires class Chained so we first
+      must port it to the new infrastructure, which has
+      became ChainedCompiler.
 --------------------------------------------------------------------------------
-(6) → 1)
-      we may have to rewrite infer the build systrem.
-      perhaps split it up.
-      One part should ONLY be used to determine the build
-      system from a DIRECTORY.
-      Also name it appropriately, say:
-      class InferTheBuildSystemFromThisDirectory
-      end
-      and the other class shall do ... whatever the old one did.
-      THIS IS FOR THE BUILD SYSTEM
-# ========================================================================= #
-# === infer_the_build_system
-#
-# This method will return a String, indicating which build system is
-# most likely to be used for a given program at hand.
-# ========================================================================= #
-      def infer_the_build_system(
-      i             = :infer_automatically,
-      program_path  = nil,
-      depends_on    = nil, # ← This optional argument can be an Array.
-      optional_hash = {}
-      )
-      use_a_build_directory = false
-      unless optional_hash.empty?
-# ===================================================================== #
-# === :use_a_build_directory
-# ===================================================================== #
-      if optional_hash.has_key? :use_a_build_directory
-      if optional_hash[:use_a_build_directory] == true
-      use_a_build_directory = true
-      end
-      end
-      end
-      case i
-# ======================================================================= #
-# === :infer_automatically
-#
-# Must query whether we will try to infer the build system automatically.
-# ======================================================================= #
-      when :infer_automatically,
-      :default,
-      nil
-      set_use_this_build_system nil # ← Default start value.
-      iterate_over_the_build_system_priorities
-      end
-      return @use_this_build_system # Return our findings here.
-      end; alias infer_build_system infer_the_build_system # === infer_build_system
-      if @use_this_build_system.nil?
-# ===================================================================== #
-# If it is still nil then we try some other checks.
-# ===================================================================== #
-# ===================================================================== #
-# === Check for a rubygem file:
-# ===================================================================== #
-      elsif program_path and program_path.end_with?('.gem')
-      set_use_this_build_system 'rubygem'
-# ===================================================================== #
-# === Check for ninja:
-# ===================================================================== #
-      elsif depends_on and depends_on_ninja?(depends_on)
-      set_use_this_build_system 'ninja'
-      else
-      if i.is_a? Symbol
-      e "#{rev}Unregistered symbol: #{i}"
-      else
-      set_use_this_build_system i
-      end
-      end
-      end
-      if does_this_file_exist?("#{i}configure") and
-      configure_has_a_higher_priority_than_meson?
-      set_use_this_build_system 'configure'
-      end
-# ========================================================================= #
-# === iterate_over_the_build_system_priorities
-# ========================================================================= #
-      def iterate_over_the_build_system_priorities
-# ======================================================================= #
-# We will simply iterate over the Array that originated from the
-# file 'build_systems_priorities.yml'.
-# ======================================================================= #
-      dataset_from_build_systems_priorities?.each {|this_entry|
-# ===================================================================== #
-# We will only modify the above variable if it is nil, since that
-# means it has not yet been specified in more detail.
-# ===================================================================== #
-      if @use_this_build_system.nil?
-      case this_entry
-# ================================================================= #
-# === cmake
-# ================================================================= #
-      when 'cmake'
-# =============================================================== #
-# === Handle cmake installation types next
-#
-# This ought to come quite early.
-# =============================================================== #
-      if does_this_file_exist?(FILE_CMAKE_LISTS, use_a_build_directory)
-      if depends_on and depends_on_cmake?
-      set_use_this_build_system 'cmake'
-      else
-      set_use_this_build_system 'cmake'
-      end
-      end
-# ================================================================= #
-# === meson
-# ================================================================= #
-      when 'meson'
-      if meson_build_file_exists?(:default, use_a_build_directory) # In this case, handle meson.
-      set_use_this_build_system 'meson'
-      end
-# ================================================================= #
-# === waf
-# ================================================================= #
-      when 'waf'
-# =============================================================== #
-# === Handle 'waf' installations next
-# =============================================================== #
-      if does_this_file_exist?(FILE_WAF, use_a_build_directory) and
-      !meson_build_file_exists?
-      if depends_on and depends_on_waf?
-      set_use_this_build_system 'waf'
-      else
-      set_use_this_build_system 'waf'
-      end
-      end
-# ================================================================= #
-# === scons
-# ================================================================= #
-      when 'scons'
-# =============================================================== #
-# === Handle programs based on scons next
-# =============================================================== #
-      if does_this_file_exist?(FILE_SCONS) and
-      !meson_build_file_exists?
-      if depends_on and depends_on_python?
-      set_use_this_build_system 'scons'
-      else
-      set_use_this_build_system 'scons'
-      end
-      end
-      end
-      end
-      }
-      end
-# =========================================================================== #
-# === RBT.infer_build_system
-# =========================================================================== #
-##def self.infer_build_system(
-#   i = ARGV,
-#   &block
-# )
-      _ = RBT::Action::InferBuildSystem.new(i, &block)
-# return _.build_system?
-#nd
---------------------------------------------------------------------------------
-(7) → validate_all_cookbook_entries
-      ^^^ continue there and add homepages to every entry.
-      ^^^^^^ being handled right now.
-      YES LET'S HAVE HOMEPAGE ENTRIES !!!!
-      Every program should have one.
+(190) → To stop something from being updated/upgraded:
+      brew pin <formula>
+      ^^^ enable this in rbt
+      rbt pin htop
+      rbt --pin htop
+      ^^^ add into a local .yml file
+      ^^^ notify the user about this
+      and then when doing:
+      rbt htop
+      opne "htop can not be installed because it is pinned down."
+      opne to unpin do:
+      rbt unpin htop
+      rbt --unpin htop
+      when pinning, also store the version
+      so that in the future we may pin only certain versions
+      also add a
+      --forbid-installation-of
+      ^^^ and document all of this.
 --------------------------------------------------------------------------------
-(8) → rewrite it again? hmmmmmm...
-      Fix this bug:
-      1) ry M4 ntrad --use-this-as-program-name=M62
-      homepage tag has to be added still
-      ^^^ and add homepage tags... this is simple
+(191) → Look at strace. Perhaps we can trace the file calls
+        in question.
 --------------------------------------------------------------------------------
-(9) → incorporate build systems priorities yml file,
-      but we need to test it on some program
-      perhaps gnome program
-      and also make it possible to query that via the
-      ruby-gtk wrapper. aka "infer build system"
-      from this path or something like that.
+(193) → Add some way to upload binary packages or so on ftp, named with
+      the particular glibc version that was used to compile it. This
+      should be some repository where I can host important packages.
+      Hmmmmm. We can simply package the app-dir at hand.
 --------------------------------------------------------------------------------
-(10) → Rewriting RBT (Rewriting RBT once again!):
-      1a) → if we rewrite rbt then start with the "does the file
-      exist locally". If yes, go through it.
-      Well this needs a bit more planning...
-      AND when it works, document it.
-      ^^^^^
-      1b) → during the rewrite we must enable --expand to read from the
-      expanded dataset too, rather than loading the original yaml
+(194) → 3) No package 'libmate-menu' found
+      ^^^ das sollte einen vorschlag liefern wie man das löst
+      also zum beispiel
+      "One suggested way to solve the above issue is by doing:
+      rbt matemenus
+      yup das geht an sich... den fehler oben müssen wir aber noch
+      testen so das es einen guten vorschlag gibt.
+      Hmm eher doch nicht ... oder an sich schon.
+      Zerst einmal über aliases lösen: ok das hier gelöst.
+      wir suchen etwas
+      Wir müssen das noch ausführen... gibt es ein Programm?
+      mate-control-center zeigt diesen fehleran
+      ^^^ auch dokumentieren sobald das geht
+      mate-control-center
+      well this kind of sucks
+      I guess the whole problem+error detection has to be written
+      anew, since right now it is just horrible.
+--------------------------------------------------------------------------------
+(195) → 4) add a toolchain into /home/Programs
+      hmm:
+      /home/Programs/Toolchain
+      ^^^ without versioning for now.
+      This should be used for bootstrapping a linux system.
+--------------------------------------------------------------------------------
+(196) → 1) REWRITE RBT FROM THE GET GO !!!!
+--------------------------------------------------------------------------------
+(197) → 1) Add the possibility to use abbreviations again, but make it optional.
+      The user should be able to toggle this behaviour on the commandline.
+      Document this as well.
+      THEN TRANSFER TO THE OTHER COMPUTER. Huh? What other computer?
+      hmmm.
+--------------------------------------------------------------------------------
+(198) → 3) Creating GoboLinux Recipes
+      Enable homepage: setting in cookbooks though
+      AND then use it in the gobo recipes too. Should
+      check for some more goborecipes ^^^ via homepage.
+      gobolinux.tar.xz
+      ^^^ also package that up automatically and then
+      upload to a FTP site.
+      ^^^ work on this and when it works, announce it on the
+      gobolinux mailing list as well.
+--------------------------------------------------------------------------------
+(199) → 3) Rewrite the whole rbt logic... make use of the internal
+      hash more frequently rather than a billion ivars. ALSO,
+      from the beginning make sure that w... ah well.
+--------------------------------------------------------------------------------
+(200) → 4) Flexiblere Plugin Architektur?
+      Cmake und Scons Support verbessern. Das ganze sollte abstrahiert
+      werden so das man beliebige Tools verwenden kann.
+      So das man eine konsistente API verwenden kann.
+--------------------------------------------------------------------------------
+(201) → →
+      RBT::Compile: Something went wrong via `cmake`.
+      RBT::Compile: Something went wrong via `cmake`.
+      ^^^^^^^^ Don't run this twice; and make the reporting better in general.
+      ^^^^^^^^ remove this error. Why does it happen twice anyway
+      and why is this so unspecific?
+      ^^^ guess we have to go through the whole logic and redo it. Grrrrr.
+      hmm.
+      Perhaps create a new class that does handle this.
+      → ONE CLASS TO RULE ALL THE ERRORS.
+      class RBT::ProblemsAndErrors
+      ^^^ but study first how to do so.
+      We should decide what this class must be able to do:
+      a) distinguish between PROBLEMs and ERRORS
+      b) use the method .detect() on the given line to detect
+      which problems exist.
+      c) add the possibility to suggest useful solutions to
+      the end user.
+      d) store findings on the toplevel e.g.
+      RBT.problems?
+      and
+      RBT.errors?
+      ^^^ but do not remove the old code for the time
+      being - instead add the above ADDITIONALLY.
+      also ... add logging support from the beginning,
+      and store the time snaptshots for that.
+      ^^^ rework the error logic ...
+      THE WHOLE ERROR LOGIC .......
+--------------------------------------------------------------------------------
+(202) → ry gcc ntrad --reuse-old-configure-options
+      RBT::Compile: Re-using the old configure option, which was `--prefix=/Programs/Gcc/8.1.0 --enable-languages=c,c++,lto,objc,fortran --enable-shared --disable-static --disable-multilib --target=x86_64-slackware-linux --build=x86_64-slackware-linux --host=x86_64-slackware-linux --disable-libunwind-exceptions --enable-bootstrap --enable-linker-build-id`.
+      RBT::Compile: Now entering the directory `/Depot/Temp/rbt/gcc-8.3.0/BUILD_DIRECTORY/`.
+      --prefix=/Programs/Gcc/8.3.0/ --enable-languages=c,c++,lto,objc,fortran --enable-shared --disable-static --disable-multilib --target=x86_64-slackware-linux --build=x86_64-slackware-linux --host=x86_64-slackware-linux --disable-libunwind-exceptions --enable-bootstrap --enable-linker-build-id
+      Traceback (most recent call last):
+      13: from /Programs/Ruby/2.6.1/bin/rbt:13:in `<main>'
+      12: from /Programs/Ruby/2.6.1/bin/rbt:13:in `new'
+      11: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/commandline/commandline_interface.rb:60:in `initialize'
+      10: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/commandline/commandline_interface.rb:60:in `new'
+      9: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/initialize.rb:145:in `initialize'
+      8: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/run.rb:23:in `run'
+      7: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:34:in `menu'
+      6: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:34:in `each'
+      5: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:34:in `block in menu'
+      4: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:430:in `menu'
+      3: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/misc.rb:988:in `reuse_old_configure_options'
+      2: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/misc.rb:934:in `run_configure_make_and_make_install_with_this_configure_line'
+      1: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/configure.rb:53:in `run_the_configure_command'
+      /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/prefix.rb:247:
+      in `prefix?': undefined method `end_with?' for :use_ntrad_prefix_at_a_later_time:Symbol (NoMethodError)
+      ^^^^ hmmmmmmm,mmmmmmm
+--------------------------------------------------------------------------------
+(203) → ntrad glib --use-this-version=glib-2.54.3.tar.xz
+      RBT::Compile: Setting to the specific version `2.54.3` now.
+      RBT::Compile: The program `glib` will be compiled/installed next.
+      = Infobox ======================================================================
+      |                               |                                              |
+      | Compiling this program:       | glib                                         |
+      | Prefix:                       | /Programs/Glib/2.54.3/                       |
+      | Program version:              | 2.54.3                                       |
+      | Program path:                 | /Users/x/SRC/glib/glib-2.54.3.tar.xz         |
+      | Keep the archive extracted:   | Yes.                                         |
+      | Will be extracted towards:    | /Depot/Temp/rbt/glib-2.54.3/                 |
+      | Will ccache be used:          | Yes.                                         |
+      | CFLAGS in use:                | -O2 -fPIC -fno-strict-overflow -Wno-error    |
+      | Use a build directory:        | Yes.                                         |
+      | configure options:            | -Dman=true -Dselinux=false                   |
+      | Host architecture in use:     | x86_64                                       |
+      |                               |                                              |
+      ================================================================================
+      qdbus: symbol lookup error: /Programs/Qt/5.11.2/bin/../lib/libQt5Core.so.5: undefined symbol: ucnv_getDefaultName_56
+      RBT→ Extracter: Extracting `glib-2.54.3.tar.xz` to /Depot/Temp/rbt/ next.
+      RBT→ Extracter:   tar -xvf /Users/x/SRC/glib/glib-2.54.3.tar.xz -C /Depot/Temp/rbt/
+      RBT→ Extracter: Finished extracting to `/Depot/Temp/rbt/glib-2.54.3/`.
+      RBT::Compile: Entering the directory /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/
+      RBT::Compile: Now entering the directory `/Depot/Temp/rbt/glib-/Programs/Glib/2.54.3//BUILD_DIRECTORY/`.
+      RBT::CreateProgram: Glib-2.54.3 (Program name: Glib and Program Version: 2.54.3)
+      RBT::CreateProgram: The target directory will be at `/Programs/Glib/2.54.3/`.
+      RBT::CreateProgram: Creating directory /Programs/Glib/2.54.3/ next.
+      RBT::CreateProgram: Several subdirectories will now be created in that directory, namely:
+      RBT::CreateProgram:   bin/, include/, lib/, man/, sbin/, Shared/, Resources/
+      RBT::CreateProgram: Done!
+      RBT→ Symlink: Symlinking /Programs/Glib/2.54.3/ into /Programs/Glib/Current.
+      ================================================================================
+      CC="ccache gcc" /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/configure --prefix=/Programs/Glib/2.54.3/ -Dman=true -Dselinux=false 2>&1
+      ================================================================================
+      sh: /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/configure: No such file or directory
+      Now running `make` from /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/BUILD_DIRECTORY/.
+      make: *** No targets specified and no makefile found.  Stop.
+      RBT::Compile: The program `glib` could not be installed.
+      ^^^ da stimmt was nit beim verzeichnis... das wo das extracted wird
+--------------------------------------------------------------------------------
+(204) → sh: meson: command not found
+      ^^^
+      RBT::Compile: The program `appstream` will be compiled/installed next.
+      = Infobox ========================================================================
+      |                               |                                                |
+      | Compiling this program:       | AppStream                                      |
+      | Prefix:                       | /usr/                                          |
+      | Program version:              | 0.12.0                                         |
+      | Program path:                 | /Users/x/SRC/appstream/AppStream-0.12.0.tar.xz |
+      | Keep the archive extracted:   | Yes.                                           |
+      | Will be extracted towards:    | /Depot/Temp/rbt/AppStream-0.12.0/              |
+      | Will ccache be used:          | Yes.                                           |
+      | CFLAGS in use:                | -O2 -fPIC -fno-strict-overflow -Wno-error      |
+      | Use a build directory:        | Yes.                                           |
+      | Host architecture in use:     | x86_64                                         |
+      |                               |                                                |
+      ==================================================================================
+      RBT→ Extracter: Extracting `AppStream-0.12.0.tar.xz` to /Depot/Temp/rbt/ next.
+      RBT→ Extracter:   tar -xvf /Users/x/SRC/appstream/AppStream-0.12.0.tar.xz -C /Depot/Temp/rbt/
+      RBT→ Extracter: Finished extracting to `/Depot/Temp/rbt/AppStream-0.12.0/`.
+      RBT::Compile: Entering the directory /Depot/Temp/rbt/AppStream-0.12.0/
+      RBT::Compile: Now entering the directory `/Depot/Temp/rbt/AppStream-0.12.0/BUILD_DIRECTORY/`.
+      meson --prefix=/usr/
+      sh: meson: command not found
+      RBT::Compile: No file called build.ninja could be found - thus,
+      RBT::Compile: the build tool called ninja can not be run.
+      Unregistered error: could_not_find_file_called_build_ninja (class: Symbol)
+      RBT::Compile: The program `appstream` could not be installed.
+      ^^^^ reigster this too to
+      switch python
+      if is on roebe and
+      /Programs/Python/ exists with at the least
+      one python version
+--------------------------------------------------------------------------------
+(205) → See any operating system documentation about shared libraries for
+      more information, such as the ldand ld.so(8) manual pages.
+--------------------------------------------------------------------------------
+(206) → /usr/bin/mkdir -p '/usr/share/gir-1.0/'
+      /usr/bin/ginstall -c -m 644 Thunarx-3.0.gir '/usr/share/gir-1.0/'
+      /usr/bin/mkdir -p '/usr/include/thunarx-3/thunarx'
+      /usr/bin/ginstall -c -m 644 thunarx.h thunarx-config.h thunarx-file-info.h thunarx-menu.h thunarx-menu-item.h thunarx-menu-provider.h thunarx-preferences-provider.h thunarx-property-page.h thunarx-property-page-provider.h thunarx-provider-factory.h thunarx-provider-module.h thunarx-provider-plugin.h thunarx-renamer.h thunarx-renamer-provider.h '/usr/include/thunarx-3/thunarx'
+      /usr/bin/mkdir -p '/usr/lib/pkgconfig'
+      /usr/bin/ginstall -c -m 644 thunarx-3.pc '/usr/lib/pkgconfig'
+      /usr/bin/mkdir -p '/usr/lib/girepository-1.0/'
+      /usr/bin/ginstall -c -m 644 Thunarx-3.0.typelib '/usr/lib/girepository-1.0/'
+      make[2]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunarx'
+      make[1]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunarx'
+      Making install in thunar
+      make[1]: Entering directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'
+      make  install-am
+      make[2]: Entering directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'
+      CCLD     thunar
+      libtool:   error: cannot find the library '/usr/lib64/libudev.la' or unhandled argument '/usr/lib64/libudev.la'
+      make[2]: *** [Makefile:910: thunar] Error 1
+      make[2]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'
+      make[1]: *** [Makefile:2473: install] Error 2
+      make[1]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'^
+      ^^^ autofix?
+--------------------------------------------------------------------------------
+(1) → try_to_use_the_file_windows_cookbook.yml
+      ^^^ enable support for windows_cookbooks.yml again
+      but this requires proper loading of this dataset onto the main
+      hash.
+      This is now semi-possible as of April 2024, but still needs
+      more testing.
+--------------------------------------------------------------------------------
+(2) → trad mate-panel-1.21.3.tar.xz
+      RBT::Compile: The program `matepanel1.21.3.tar.xz` could not be found. We thus can not
+      RBT::Compile: compile it and hence, can not continue. If this file should exist,
+      RBT::Compile: it could be found at:
+      /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/yaml/individual_cookbooks/matepanel1.21.3.tar.xz.yml
+      Traceback (most recent call last):
+      9: from /Users/x/DATA/PROGRAMMING_LANGUAGES/RUBY/src/roebe/lib/roebe/toplevel_methods/trad.rb:27:in `<main>'
+      8: from /Users/x/DATA/PROGRAMMING_LANGUAGES/RUBY/src/roebe/lib/roebe/toplevel_methods/trad.rb:14:in `trad'
+      7: from /Users/x/DATA/PROGRAMMING_LANGUAGES/RUBY/src/roebe/lib/roebe/toplevel_methods/trad.rb:14:in `new'
+      6: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/initialize.rb:140:in `initialize'
+      5: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/run.rb:28:in `run'
+      4: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/batch_compile_the_programs.rb:27:in `batch_compile_the_programs'
+      3: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/batch_compile_the_programs.rb:27:in `each'
+      2: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/batch_compile_the_programs.rb:28:in `block in batch_compile_the_programs'
+      1: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/do_compile_this_program.rb:231:in `do_compile_this_program'
+      /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/cookbook_dataset.rb:98:in
+      `archive_type?': undefined method `archive_type?' for nil:NilClass (NoMethodError)
+      ^^^^ das sollte automatisch splitten in version...
+      trad mate-panel-1.22.1.tar.xz
+      ^^^ das existiert auch lokal
+      aber das kompiliert net gscheit.
+      ^^^ DANNN hochladen.
+--------------------------------------------------------------------------------
+(3) → Handle these commandline instructions, which originated from the old
+      class RBT::Commandline but are not yet completely ported:
+# rbt --download=htop # <- implemented \o/
+# rbt --set-source-dir=/Files/Archive/
+#
+# rbt --download htop
+# ^^^ all the above cases work now.
+      rbt --download glibc-2.28
+      rbt --download-into-proper-directory htop
+      rbt --download-proper htop
+      rbt --download-into-dir htop
+      rbt pin htop
+      rbt --set-source-dir /Files/Archive/
+      opnn; RBT.permanently_set_source_directory($3.to_s.dup) { :be_verbose }
+      ^^^
+--------------------------------------------------------------------------------
+(4) → Continue porting old RBT code to the new infrastructure.
+--------------------------------------------------------------------------------
+(5) → enable in rbt a way to download a remote package
+      that has ... well binutils and so forth
+      from which we can then bootstrap the compile
+      environment, in the event that some error happens
+--------------------------------------------------------------------------------
+(6) → one day add a meta-action:
+      :build_lfs_from_scratch
+      AND
+      :build_blfs_from_scratch
+      This shall create all necessary steps.
+      We already describe some of the steps, but not all.
+--------------------------------------------------------------------------------
+(7) → 1)
+      we may have to rewrite infer the build systrem.
+      perhaps split it up.
+      One part should ONLY be used to determine the build
+      system from a DIRECTORY.
+      Also name it appropriately, say:
+      class InferTheBuildSystemFromThisDirectory
+      end
+      and the other class shall do ... whatever the old one did.
+      THIS IS FOR THE BUILD SYSTEM
+# ========================================================================= #
+# === infer_the_build_system
+#
+# This method will return a String, indicating which build system is
+# most likely to be used for a given program at hand.
+# ========================================================================= #
+      def infer_the_build_system(
+      i             = :infer_automatically,
+      program_path  = nil,
+      depends_on    = nil, # ← This optional argument can be an Array.
+      optional_hash = {}
+      )
+      use_a_build_directory = false
+      unless optional_hash.empty?
+# ===================================================================== #
+# === :use_a_build_directory
+# ===================================================================== #
+      if optional_hash.has_key? :use_a_build_directory
+      if optional_hash[:use_a_build_directory] == true
+      use_a_build_directory = true
+      end
+      end
+      end
+      case i
+# ======================================================================= #
+# === :infer_automatically
+#
+# Must query whether we will try to infer the build system automatically.
+# ======================================================================= #
+      when :infer_automatically,
+      :default,
+      nil
+      set_use_this_build_system nil # ← Default start value.
+      iterate_over_the_build_system_priorities
+      end
+      return @use_this_build_system # Return our findings here.
+      end; alias infer_build_system infer_the_build_system # === infer_build_system
+      if @use_this_build_system.nil?
+# ===================================================================== #
+# === Check for ninja:
+# ===================================================================== #
+      elsif depends_on and depends_on_ninja?(depends_on)
+      set_use_this_build_system 'ninja'
+      else
+      if i.is_a? Symbol
+      e "#{rev}Unregistered symbol: #{i}"
+      else
+      set_use_this_build_system i
+      end
+      end
+      end
+      if does_this_file_exist?("#{i}configure") and
+      configure_has_a_higher_priority_than_meson?
+      set_use_this_build_system 'configure'
+      end
+# ========================================================================= #
+# === iterate_over_the_build_system_priorities
+# ========================================================================= #
+      def iterate_over_the_build_system_priorities
+# ======================================================================= #
+# We will simply iterate over the Array that originated from the
+# file 'build_systems_priorities.yml'.
+# ======================================================================= #
+      dataset_from_build_systems_priorities?.each {|this_entry|
+# ===================================================================== #
+# We will only modify the above variable if it is nil, since that
+# means it has not yet been specified in more detail.
+# ===================================================================== #
+      if @use_this_build_system.nil?
+      case this_entry
+# ================================================================= #
+# === cmake
+# ================================================================= #
+      when 'cmake'
+# =============================================================== #
+# === Handle cmake installation types next
+#
+# This ought to come quite early.
+# =============================================================== #
+      if does_this_file_exist?(FILE_CMAKE_LISTS, use_a_build_directory)
+      if depends_on and depends_on_cmake?
+      set_use_this_build_system 'cmake'
+      else
+      set_use_this_build_system 'cmake'
+      end
+      end
+# ================================================================= #
+# === meson
+# ================================================================= #
+      when 'meson'
+      if meson_build_file_exists?(:default, use_a_build_directory) # In this case, handle meson.
+      set_use_this_build_system 'meson'
+      end
+# ================================================================= #
+# === waf
+# ================================================================= #
+      when 'waf'
+# =============================================================== #
+# === Handle 'waf' installations next
+# =============================================================== #
+      if does_this_file_exist?(FILE_WAF, use_a_build_directory) and
+      !meson_build_file_exists?
+      if depends_on and depends_on_waf?
+      set_use_this_build_system 'waf'
+      else
+      set_use_this_build_system 'waf'
+      end
+      end
+# ================================================================= #
+# === scons
+# ================================================================= #
+      when 'scons'
+# =============================================================== #
+# === Handle programs based on scons next
+# =============================================================== #
+      if does_this_file_exist?(FILE_SCONS) and
+      !meson_build_file_exists?
+      if depends_on and depends_on_python?
+      set_use_this_build_system 'scons'
+      else
+      set_use_this_build_system 'scons'
+      end
+      end
+      end
+      end
+      }
+      end
+--------------------------------------------------------------------------------
+(8) → validate_all_cookbook_entries
+      ^^^ continue there and add homepages to every entry.
+      ^^^^^^ being handled right now.
+      YES LET'S HAVE HOMEPAGE ENTRIES !!!!
+      Every program should have one.
+      If this works, remove it eventually.
+--------------------------------------------------------------------------------
+(9) → rewrite it again? hmmmmmm...
+      Fix this bug:
+      1) ry M4 ntrad --use-this-as-program-name=M62
+      homepage tag has to be added still
+      ^^^ and add homepage tags... this is simple
+--------------------------------------------------------------------------------
+(10) → incorporate build systems priorities yml file,
+      but we need to test it on some program
+      perhaps gnome program
+      and also make it possible to query that via the
+      ruby-gtk wrapper. aka "infer build system"
+      from this path or something like that.
+--------------------------------------------------------------------------------
+(11) → Rewriting RBT (Rewriting RBT once again!):
+      1a) → if we rewrite rbt then start with the "does the file
+      exist locally". If yes, go through it.
+      Well this needs a bit more planning...
+      AND when it works, document it.
+      ^^^^^
+      1b) → during the rewrite we must enable --expand to read from the
+      expanded dataset too, rather than loading the original yaml
       file and sanitizing it. The user must be able to decide
       on his or her own here.
       ^^^
@@ -252,7 +549,7 @@
       else
       and perhaps also start with a test case or so.
 --------------------------------------------------------------------------------
-(11) → Write SIMPLE ruby-gtk bindings STANDALONE.
+(12) → Write SIMPLE ruby-gtk bindings STANDALONE.
       ^ Nur die core functionality.
       ^^^ das dann inkludieren.
       Display RBT Version here.
@@ -266,7 +563,7 @@
       alias gtk_compile
       SYSTEM/compile_program.rb:
 --------------------------------------------------------------------------------
-(12) → Ensure that scons-related compiling can work:
+(13) → Ensure that scons-related compiling can work:
 # ========================================================================= #
 # === compile_via_scons                                         (scons tag)
 #
@@ -279,7 +576,7 @@
       @rscons.set_prefix prefix
       @rscons.run
 --------------------------------------------------------------------------------
-(13) → Ensure that we can obtain a random program:
+(14) → Ensure that we can obtain a random program:
       rbt --random?
       rbt random?
       rbt RANDOM?
@@ -293,7 +590,7 @@
       e.g:
       rbt --last-compiled-program?
 --------------------------------------------------------------------------------
-(14) → Work on RBT in such a way that it will make it super-easy to
+(15) → Work on RBT in such a way that it will make it super-easy to
       setup a new system from scratch on my gobolinux laptop.
       In order to do this, start the gobolinux laptop again
       hmmm.
@@ -301,7 +598,7 @@
       laptop? Choices, choices. Well - laptop is simpler IMO.
       ^^^ yeah use gobolinux on the laptop again!
 --------------------------------------------------------------------------------
-(15) → START of the OLD CONGLOMERATE, such as via old_installer.rb:
+(16) → START of the OLD CONGLOMERATE, such as via old_installer.rb:
       def compile(this_program, real_name = database_loader.short_name)
 # ======================================================================= #
 # Next we check if we have to compile or not. If not, we skip in the
@@ -623,9 +920,7 @@
 # ========================================================================= #
       def intercept_database_creation
       if CONFIG.use_sqlite3_database
-# Ask silently. Dont want to spam too much.
-      name = @query.real_shortcut_name
-      version = program_version?
+
       description = database_loader.description # beschreibung
       binaries = database_loader.binaries # beschreibung
 # Default database
@@ -1124,28 +1419,7 @@
       end
 # ========================================================================= #
 # === invoke_gnustyle_compiling
-#
-# Normally, this method will invoke the following build chain:
-#
-#     "configure"
-#     "make"
-#     "make install"
-#
-# It uses obligate options which are passed to it. By the way, instead of
-# make, the user can denote an alternative program, like qmake, or cmake.
-# But in general, make is the default option and will thus be used most
-# often.
-# ========================================================================= #
-      def invoke_gnustyle_compiling(configure_options)
-      this_dir = database_loader.extract_to.dup
-# Always squeeze the configure command before continuing.
-      @object_configure_string.sanitize_configure_string # exchanges '  ' with ' '
-      unless database_loader.use_this_build_directory.empty?
-      this_dir = this_dir.split('/')[0..-2].join('/')
-      @configure_prefix = '../' # adapt configure prefix
-      end
-      @configure_string = @object_configure_string.string?
-      if File.exist?(this_dir) # if TEMP_DIR exists?
+# ========================================================================= #
 # At this point, append the two
 # prepend to @configure_command
       if check_for_configure_script(this_dir) # if a configure script could be found and invoked true
@@ -1845,9 +2119,6 @@
       append_what_into('=' * 80+"<br>"+N, log_all_installed_source_files_html)
       end
       else
-      opn; warnf 'Can not create file '; cfile log_all_installed_source_files_html
-      opn; warn 'because of insufficient permissions.'
-      end
       end
 # ========================================================================= #
 # === decide_whether_to_run_gnu_autoconfigure_or_something_else
@@ -2079,7 +2350,7 @@
       end
       end
 --------------------------------------------------------------------------------
-(16) → rbt glib --use-this-version=2.72.3
+(17) → rbt glib --use-this-version=2.72.3
       But this was quite verbose.
       For RBT::Installer, the above syntax will work (eventually),
       but you can also use the @ syntax (which already does
@@ -2269,13 +2540,6 @@
       run_ruby_installation
 # ===================================================================== #
 # === Handle python-based installations, based on the setup.py file
-# ===================================================================== #
-      elsif do_the_dependencies_include_this_program?('python') and
-      File.exist?('setup.py')
-      run_python_installation
-      do_not_run_make
-# ===================================================================== #
-# === Handle python-based installations, based on the setup.py file
 # ===================================================================== #
       elsif do_the_dependencies_include_this_program?('python') and
       File.exist?('configure.py')
@@ -3112,27 +3376,27 @@
       end
 # ry htop --tags pdf
 --------------------------------------------------------------------------------
-(17) → fix:
+(18) → fix:
       ry glibc ntrad dontsymlink --use-this-version=2.26
       ^^^
 --------------------------------------------------------------------------------
-(18) → someone on IRC: I am going to test creating valid gobolinux recipes
+(19) → someone on IRC: I am going to test creating valid gobolinux recipes
       with the RBT scripts.
       someone on IRC: in the long version
       rbt php generate_gobolinux_recipe
 --------------------------------------------------------------------------------
-(19) → Test autogeneration of gobolinux recipes.
+(20) → Test autogeneration of gobolinux recipes.
 --------------------------------------------------------------------------------
-(20) → --purge-old-version
+(21) → --purge-old-version
       ^^^ but only if we compile into the /Programs hierarchy and only
       if it was successful. so before this can be enabled, we need
       to have worked on "was this a success".
       ^^^ interesting.....
 --------------------------------------------------------------------------------
-(21) → At first make use of the ... thingy that fpm. then when we
+(22) → At first make use of the ... thingy that fpm. then when we
 # udnerstood it properly we can replace fpm and integrate it.
 --------------------------------------------------------------------------------
-(22) → When we compile this, also do a
+(23) → When we compile this, also do a
       restore/
       directory machen, sowohl wenn prefix /usr als auch
       gobolinux prefix.
@@ -3145,15 +3409,15 @@
       Für gobo prefix in:
       /Programs/Htop/7.5/restore/
 --------------------------------------------------------------------------------
-(23) → add a way to sync all CHANGED cookbooks
+(24) → add a way to sync all CHANGED cookbooks
       so we need a way to determine when the last update
       happened hmmmmmm. What does this even mean?
 --------------------------------------------------------------------------------
-(24) → -b, --batch
+(25) → -b, --batch
       Batch mode: avoid asking questions.
       Apply where? Hmm. In general, probably.
 --------------------------------------------------------------------------------
-(25) → Automated program compilation tool.
+(26) → Automated program compilation tool.
       Usage: Compile <program> [<version>]
       Options:
       -c, --configure-options <entry>
@@ -3190,7 +3454,7 @@
       -R, --no-requirements
       Do not process the Requirements script after installation
 --------------------------------------------------------------------------------
-(26) → From Freshen, add:
+(27) → From Freshen, add:
       - GetRecipe in ruby
       - GetRecipes only of installed
       programs AND only if newer version, dont flush /Files/Compile/Recipes
@@ -3198,16 +3462,16 @@
       anzeigen
       ^^ Clone Gobolinux Functionality.
 --------------------------------------------------------------------------------
-(27) → integrate gobolinux loader.
+(28) → integrate gobolinux loader.
       This works semi-ok ... some bugs still exist
       ALSO we must check for recipe-type still.
       but aside from this, this should be doable.
       we could also use this to load a gobo recipe :)
 --------------------------------------------------------------------------------
-(28) → enable:
+(29) → enable:
       set_configure_base_dir
 --------------------------------------------------------------------------------
-(29) → Hmmm. Wenn wir "Compile bla" machen dann sollten wir auch eine
+(30) → Hmmm. Wenn wir "Compile bla" machen dann sollten wir auch eine
       yaml datei erstellen, die ALL die relevante Information hat.
       So können wir nämlich copy/pasten ...
       Also wahrscheinlich noch eine Yaml Datei erstellen.
@@ -3219,13 +3483,13 @@
       aber zuerst mal sollten wir das "compiled program" überlegen b
       ob success war oder nit
 --------------------------------------------------------------------------------
-(30) → add:
+(31) → add:
       --enable-everything
       ^^^ this enables all --enable and all --with
       This has been added but not yet documented.
       It is also a bit buggy and only works for --enable-related entries.
 --------------------------------------------------------------------------------
-(31) → enable sinatra bindings to rbt core functionality
+(32) → enable sinatra bindings to rbt core functionality
       For example:
       install/name/version
       ^^^ version is optional
@@ -3247,26 +3511,26 @@
       Yeah we must extend UrlAction and we must add more
       HtmlTemplate instances as well.
 --------------------------------------------------------------------------------
-(32) → Add the ability to uninstall packages with dependencies.
+(33) → Add the ability to uninstall packages with dependencies.
       add action:
-        Uninstall.new :htop
+      Uninstall.new :htop
       ^^^^ this works only a bit so far e. g. we can uninstall directories
       but we also want to be able to say "uninstall libfoo.so.1"
-        and this will uninstall the other files that belong to this
+      and this will uninstall the other files that belong to this
       package.
 --------------------------------------------------------------------------------
-(33) → write a script that tells us which programs are
+(34) → write a script that tells us which programs are
       available in a statically compiled manner.
       Work through things such as:
       coreutils
       binutils
       and then figure out which one is static.
 --------------------------------------------------------------------------------
-(34) → 
+(35) → 
       rbt: add a toplevel method that checks for the correct
       program
 --------------------------------------------------------------------------------
-(35) → → - enhance the GUI things from the get go, perhaps even
+(36) → → - enhance the GUI things from the get go, perhaps even
       via jruby. yeah.
       → - make sure it works on windows from the get go as well
       and test it!
@@ -3279,20 +3543,20 @@
       however had before we do so, start with slow polishing
       so that the whole RBT suite becomes better
 --------------------------------------------------------------------------------
-(36) → We need a way to work with SQL dataset too rather than
+(37) → We need a way to work with SQL dataset too rather than
       .yml flatfiles. This now works a bit via RBT::CompileViaSQLDatabase.
       Needs to be improved further.
       Also read up on Sequel for this. Once we understand it, try to
       transition to using Sequel.
       ^^^ also add class
 --------------------------------------------------------------------------------
-(37) → add --backend=
+(38) → add --backend=
       for rbt compile to specify sqlite, or raw-yaml,
       expanded, expanda-dataset + explain it
       One day we should be able to specify this.
       For now (2022) we let it go.
 --------------------------------------------------------------------------------
-(38) → we should rewrite the project. The meta-goals are:
+(39) → we should rewrite the project. The meta-goals are:
       (1) support on windows for compilation
       ^^^ but this does not work.
       Also add more specifications in this regard.
@@ -3302,11 +3566,11 @@
       and how to query it. So investigate SQL.
       and make this work on windows as well.
 --------------------------------------------------------------------------------
-(39) → allow just a single src_dir, without subdirectories
+(40) → allow just a single src_dir, without subdirectories
       via some configuration value or so. also an ENV
       setting and commandline.
 --------------------------------------------------------------------------------
-(40) → enable support for:
+(41) → enable support for:
       rbt --compile_all_of=science
       rbt --tag_compile=science
       rbt --compile_these_tags=php
@@ -3343,12 +3607,6 @@
       we are even allowed to create a directory
       or not.
 --------------------------------------------------------------------------------
-(45) → Consider adding:
-      --silent
-      --silence
-      --quiet
-      or so to show less, or something like that.
---------------------------------------------------------------------------------
 (46) → Der check auf "if makefile exists"
       soll nicht gemacht werden wenn wir:
       - ruby
@@ -3473,39 +3731,6 @@
       We probably have to improve on it.
       But how to test it? Hmmm.
 --------------------------------------------------------------------------------
-(65) → ry libpng --trad --cmake
-      RBT::Compile: Using a "traditional" strategy for compilation (which means prefix /usr/).
-      RBT::Compile: We will use cmake rather than make.
-      RBT::Compile: Making use of these special environment variables:
-      LIBS will be set to the value(s): -lpthread
-      RBT::Compile: The program `libpng` will be compiled next.
-      RBT::Compile: Removing the old directory at `/home/Temp/rbt/libpng-1.6.37/`.
-      RBT→Extracter: Extracting `libpng-1.6.37.tar.xz` to `/home/Temp/rbt/` next.
-      RBT→Extracter:   tar -xvf /home/x/src/libpng/libpng-1.6.37.tar.xz -C /home/Temp/rbt/
-      RBT→Extracter: Finished extracting to `/home/Temp/rbt/libpng-1.6.37/`.
-      ┏ Infobox ━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
-      ┃                             ┃                                                                                    ┃
-      ┃ Compiling this program:     ┃ libpng                                                                             ┃
-      ┃ Prefix:                     ┃ /usr/                                                                              ┃
-      ┃ Program version:            ┃ 1.6.37                                                                             ┃
-      ┃ Program path:               ┃ /home/x/src/libpng/libpng-1.6.37.tar.xz                                            ┃
-      ┃ configure options:          ┃ --enable-shared --disable-static --with-binconfigs                                 ┃
-      ┃ Will be extracted towards:  ┃ /home/Temp/rbt/libpng-1.6.37/                                                      ┃
-      ┃ Keep the archive extracted: ┃ Yes.                                                                               ┃
-      ┃ Will ccache be used:        ┃ Yes.                                                                               ┃
-      ┃ CFLAGS in use:              ┃ -O2 -fPIC -fno-strict-overflow -Wno-error                                          ┃
-      ┃ Use a build directory:      ┃ No.                                                                                ┃
-      ┃ Host architecture in use    ┃ x86_64                                                                             ┃
-      ┃ Build system to be used:    ┃ configure                                                                          ┃
-      ┃ Compiler to be used:        ┃ gcc                                                                                ┃
-      ┃ URL to the source archive:  ┃ https://sourceforge.net/projects/libpng/files/libpng16/1.6.37/libpng-1.6.37.tar.xz ┃
-      ┃ Homepage:                   ┃ http://www.libpng.org/pub/png/libpng.html                                          ┃
-      ┃                             ┃                                                                                    ┃
-      ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┻━━━━━━━━
-      ^^^ was stimmt da nit
-      sollte cmake verwenden!!!!!
-      ^^^ THIS SHOULD DISPLAY THE BUILD SYSTEM AS CMAKE.
---------------------------------------------------------------------------------
 (66) → Add the ability to safely remove unneeded packages.
 --------------------------------------------------------------------------------
 (67) → add:
@@ -3882,15 +4107,13 @@
       Letzteres funzt nun. Die anderen Punkte funktioniere
       aber noch nit, also behalten wir diesen Punkt vorläufig.
 --------------------------------------------------------------------------------
-(103) → dump yaml
---------------------------------------------------------------------------------
-(104) → we need a way to generate a STATIC dataset, ideally in SQL,
+(103) → we need a way to generate a STATIC dataset, ideally in SQL,
       so that we don't have to use a bunch of yaml file.
 --------------------------------------------------------------------------------
-(105) → Work through both cookbooks and rbt-todo. Just for quality
+(104) → Work through both cookbooks and rbt-todo. Just for quality
       improvements.
 --------------------------------------------------------------------------------
-(106) → we had a strange conflict in where dpkg had wrong names registered
+(105) → we had a strange conflict in where dpkg had wrong names registered
       as part of the binaries:
       section.
       Thus, we need some way to find out, at the least
@@ -3899,7 +4122,7 @@
       report to the user; also exit optionally
       end
 --------------------------------------------------------------------------------
-(107) → Note that sometimes a user may wish to group-update a list of existing
+(106) → Note that sometimes a user may wish to group-update a list of existing
       cookbooks to some new cookboks, like after a year or so.
       In order to do so, we need to make this possible.
       but how yet, I don't know...
@@ -3910,12 +4133,7 @@
       "Php was installed march 2015. There is a new versiopn
       available. We thus register it for upgrading."
 --------------------------------------------------------------------------------
-(108) → try_to_use_the_file_windows_cookbook.yml
-      ^^^ enable support for windows_cookbooks.yml again
-      but this requires proper loading of this dataset onto the main
-      hash
---------------------------------------------------------------------------------
-(109) → First off you need to create a build folder and an archive
+(107) → First off you need to create a build folder and an archive
       of your files: tar czvf data.tar.gz files
       Then in the build folder you must create a control file with some wanted informations:
       Package: xxxxxx
@@ -3928,7 +4146,7 @@
       Description: This is optional, but creates warnings if left out
       ^^^ create a debian control file
 --------------------------------------------------------------------------------
-(110) → brew install imagemagick@6
+(108) → brew install imagemagick@6
       > If you don't specify @6 it will install the latest
       > version by default. I had issues with version 7 on
       > Linux so I decided to use older versions for both
@@ -3936,10 +4154,10 @@
       ^^^ here also support this syntax
       and document this but first make sure that this fits.
 --------------------------------------------------------------------------------
-(111) → improve the part on slackware package creation
+(109) → improve the part on slackware package creation
       and test it more.
 --------------------------------------------------------------------------------
-(112) → add:
+(110) → add:
       rbt --do-postinstall-step
       ^^^ do only the postinstall step, no other step
       document this as well.
@@ -3954,7 +4172,7 @@
       AND
       b) also a postinstallation step that can be used properly
 --------------------------------------------------------------------------------
-(113) → we need a way to enable defaults that help
+(111) → we need a way to enable defaults that help
       most people; not just me alone, so things
       such as "strip" should not be enabled by default.
       only for me, or when the user specifically
@@ -3966,20 +4184,20 @@
       in a linear manner in that .yml file.
       default_settings_for_rbt.yml
 --------------------------------------------------------------------------------
-(114) → enable automatic creation fo slackware package and put it
+(112) → enable automatic creation fo slackware package and put it
       into
       /Depot/Package/
       via yaml file
       if uses_slackware?
       hmmm
 --------------------------------------------------------------------------------
-(115) → ry gdb ntrad --use-this-source-location=/Mount/USB1/last_backup/src/gdb/gdb-8.2.tar.xz
+(113) → ry gdb ntrad --use-this-source-location=/Mount/USB1/last_backup/src/gdb/gdb-8.2.tar.xz
       ry gdb ntrad --use-this-source-location=/Depot/j/gdb-8.2.1.tar.xz
       ^^^ enable this and document it as well
       including several examples ...
       this does not work too terribly well right now.
 --------------------------------------------------------------------------------
-(116) → RBT::RegisterProgramFilesIntoYamlDatabase:   `/Depot/Temp/rbt/htop-2.2.0/BUILD_DIRECTORY/yaml/registered_files.yml`.
+(114) → RBT::RegisterProgramFilesIntoYamlDatabase:   `/Depot/Temp/rbt/htop-2.2.0/BUILD_DIRECTORY/yaml/registered_files.yml`.
       RBT::Cookbooks::Cookbook: The program /depot/temp/rbt/htop2.2.0/builddirectory does not appear to be registered.
       RBT::RegisterProgramFilesIntoYamlDatabase: Getting all files from `/Programs/programs/htop/2.2.0/` next.
       RBT::RegisterProgramFilesIntoYamlDatabase: We will not store the registered files as
@@ -3988,15 +4206,15 @@
       we also have to fix that strange downcasing crap there.
       hmmmmmmmmmmmmmmmmmmm........ what the actual fuck dude
 --------------------------------------------------------------------------------
-(117) → contiue to port old code - yup did this today on 12.04.2019 \o/
+(115) → contiue to port old code - yup did this today on 12.04.2019 \o/
 --------------------------------------------------------------------------------
-(118) → we need to be able to work with locally existing files
+(116) → we need to be able to work with locally existing files
       ry foobar-1.0.tar.xz
       and infer all information from that
       first, guess the directory
       this works, somewhat - need to test it more though.
 --------------------------------------------------------------------------------
-(119) → When a libtool error happns, not only autofix it but also add a way
+(117) → When a libtool error happns, not only autofix it but also add a way
       to re-compile. But add a limit like 5 times or so to this.
       ihash?[:we_tried_to_compile_this_program_n_times] = 0
       ^^^ default
@@ -4008,19 +4226,19 @@
       ^^^ this works now, somewhat, but has to be documented.
       and checked again hmm.
 --------------------------------------------------------------------------------
-(120) → make porg available again !!!
+(118) → make porg available again !!!
 --------------------------------------------------------------------------------
-(121) → enable:
+(119) → enable:
       ry compile-gcc=8.1.0
       hmmm to just re-use the old configure part in use right now
 --------------------------------------------------------------------------------
-(122) → test setting up an older computer below ... and then another
+(120) → test setting up an older computer below ... and then another
       one behind my back
       AND TEST RBT ON BOTH!
       hmmmmmmmmmmm
       test on my laptop...
 --------------------------------------------------------------------------------
-(123) → When we have finished compiling a progrem, de-register it again
+(121) → When we have finished compiling a progrem, de-register it again
       from the "currnetly compiled programs"
       ▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
       RBT::Compile: The program `blueman` will be compiled/installed next.
@@ -4030,7 +4248,7 @@
       unicode_middle_cliner
       hmm
 --------------------------------------------------------------------------------
-(124) → make it so that
+(122) → make it so that
       trad lua
       woRKS.... out of the box
       ...........................................................
@@ -4064,7 +4282,7 @@
       und dann noch ein webscraper module oder so
       das hamma eh schon oder?
 --------------------------------------------------------------------------------
-(125) → === Improve the whole handling of xorg-server
+(123) → === Improve the whole handling of xorg-server
       so that we run into less problems here in
       the long run.
       We need to think more about this e. g. why starting the xorg
@@ -4073,15 +4291,15 @@
       information to the user how to resolve these problems.
       ry xorg55 ntrad
 --------------------------------------------------------------------------------
-(126) → RBT::PostinstallationStep: Now running RBT::SymlinkThisProgram to symlink the content of `/Programs/Brotli/1.0.2/`.
+(124) → RBT::PostinstallationStep: Now running RBT::SymlinkThisProgram to symlink the content of `/Programs/Brotli/1.0.2/`.
       RBT::SymlinkThisProgram: Deleting the symlink found at /Programs/Brotli/Current.
       RBT::SymlinkThisProgram: Now symlinking from /Programs/Brotli/Brotli to /Programs/Brotli/Current.
       ^^^ what the ...
 --------------------------------------------------------------------------------
-(127) → Continue towkring on validate all cookbook entries
+(125) → Continue towkring on validate all cookbook entries
       and perhaps improve the documentation as well
 --------------------------------------------------------------------------------
-(128) → begin working on a compile shell + status shell
+(126) → begin working on a compile shell + status shell
       Works quite fine so far.
       We need to add a status command still though.
       'stats,
@@ -4090,7 +4308,7 @@
       telling us which programs were last compiled
       and so forht
 --------------------------------------------------------------------------------
-(129) → add a --lfs-tools option
+(127) → add a --lfs-tools option
       this shall compile ... into HOME_DIR/tools
       all the stuff that the lfs requires... hmm
       so essentially we pass an array of programs and
@@ -4100,28 +4318,28 @@
       http://www.linuxfromscratch.org/lfs/view/development/
       Something isn't working here very well.
 --------------------------------------------------------------------------------
-(130) → Extend:
+(128) → Extend:
       class RBT::Toolchain
       We need to make sure that it actually works from A to Z. And next
       time try it with the LFS user instead. And perhaps /tools directly
       with a mounted USB device. Hmmmmmm.
 --------------------------------------------------------------------------------
-(131) → make it possible to create slackware packages !!!
+(129) → make it possible to create slackware packages !!!
       THE GOAL is to make this easily so.
       I guess we first have to test this more thoroughly.
 --------------------------------------------------------------------------------
-(132) → DEAL WITH SQL
+(130) → DEAL WITH SQL
       add a wrapper for sql. improve on it. Read up on sql.
       DOCUMENT these strategies in the main RBT doc too
 --------------------------------------------------------------------------------
-(133) → RBT→Symlink: Can not symlink - the file at `/home/Programs/Xfce4terminal/Current` already exists.
+(131) → RBT→Symlink: Can not symlink - the file at `/home/Programs/Xfce4terminal/Current` already exists.
       ^^^^ perhaps colourize the → part there →
 --------------------------------------------------------------------------------
-(134) → rbt:
+(132) → rbt:
       ry utillinux --ntrad --statically --create-slackware-package
       ^^^ this shall be possible one day.
 --------------------------------------------------------------------------------
-(135) → Find a way to show which entries in RBT were updated since the last release.
+(133) → Find a way to show which entries in RBT were updated since the last release.
       This is probably easily done - updateentry already keeps track of releases
       in a .yml "database", as a first step.
       Then, when we do a new release, we grab that entry and well ... delete it
@@ -4172,7 +4390,7 @@
       AggregateInformationFromTheExpandedCookbooks
       ^^^ this class now exists; let's see what we can do with it.
 --------------------------------------------------------------------------------
-(136) → enable a new entry point for an existing
+(134) → enable a new entry point for an existing
       binary aka:
       ry --use-this-file-as-input=/Depot/j/ffmpeg-4.2.2.tar.xz
       ^^^ and try to deduce from there.
@@ -4182,7 +4400,7 @@
       that the loading of the yaml-dataset is decoupled here.
       Hmmmmm.
 --------------------------------------------------------------------------------
-(137) → Hmm. Aliases already exist for the ones defined in the yaml
+(135) → Hmm. Aliases already exist for the ones defined in the yaml
       file. But perhaps we should add aliases to EVERYTHING. This may
       require some kind of ... configuration setting.
       We also have to keep in mind which settings have priority.
@@ -4190,7 +4408,7 @@
       this should work...
       hmm probably add this into Aliases directly...
 --------------------------------------------------------------------------------
-(138) → The old code tried to handle global flags, in configure.
+(136) → The old code tried to handle global flags, in configure.
       Not sure if we still need it though.
 # ===================================================================== #
 # === Handle global flags next
@@ -4216,46 +4434,46 @@
       also afterwards be able to query from he commandline what
       this does
 --------------------------------------------------------------------------------
-(139) → optimize linux kernel builds; ideally make them fully automatic through
+(137) → optimize linux kernel builds; ideally make them fully automatic through
       rbt.
 --------------------------------------------------------------------------------
-(140) → someone: i got an error about guid id rather just be warned in red
+(138) → someone: i got an error about guid id rather just be warned in red
       or something if theres a permission error and not have rbt trying
       to do things itself (or at least without asking me).
       ^^^ Valid complaint.
 --------------------------------------------------------------------------------
-(141) → Auswahl recipes/packages/beides, - liste installieren.
+(139) → Auswahl recipes/packages/beides, - liste installieren.
       IN ORDER TO TEST THIS WE NEED A WAY TO LOGIN TO A FTP
       SITE AND UPLOAD A RECIPE! We can do so already.
       * Steps to perform:
       getrecipe (from gobolinux as default
       (2) upload it to UNET site or somewhere else [IMPLEMENTED ALREADY]
 --------------------------------------------------------------------------------
-(142) → Improve the error handling in general.
+(140) → Improve the error handling in general.
       when an error is encountered, feedback to
       the user which error happened and what to do about it.
       We first have to collect all errors in a specific file.
       Once that file is good enough we'll transition to it.
 --------------------------------------------------------------------------------
-(143) → perhaps create a new class called
+(141) → perhaps create a new class called
       LoadExpandedCookbookDataset
       This shall only load the expanded .yml file; that way we don't have to
       sanitize anything. \o/
 --------------------------------------------------------------------------------
-(144) → 5) spack install hdf5@1.10.1
+(142) → 5) spack install hdf5@1.10.1
       rbt glibc@2.27 --ntrad --dont-use-configure-options --dont-symlink
       ^^^ consider this versioning scheme as well,
       or something like that
       ^^^ yeah as a simpler alternative
       hmmm
 --------------------------------------------------------------------------------
-(145) → 3) fix that auto-register thingy
+(143) → 3) fix that auto-register thingy
 --------------------------------------------------------------------------------
-(146) → 2) LOOK AT OLD RBT CODE
+(144) → 2) LOOK AT OLD RBT CODE
       → port what is useful
       → kill what is outdated
 --------------------------------------------------------------------------------
-(147) → Manchmal will man eine bestimmte USE-Einstellung nur einmal
+(145) → Manchmal will man eine bestimmte USE-Einstellung nur einmal
       benutzen.  Anstatt das /etc/make.conf zweimal editiert wird (um
       die Veränderungen
       in USE anzuwenden und wieder zu entfernen) können Sie einfach die
@@ -4273,32 +4491,32 @@
       Rebuilding your entire system
       emerge --update --deep --newuse world
 --------------------------------------------------------------------------------
-(148) → http://shevegen.square7.ch/programs_version.html
+(146) → http://shevegen.square7.ch/programs_version.html
       ^^^ hmm ... also add a more detailed overview than that.
       showing also the remote URL well
       hmmm perhaps use another .html file for this though.
 --------------------------------------------------------------------------------
-(149) → Eine Klasse erstellen die eine sqlite datenbank erstellt
+(147) → Eine Klasse erstellen die eine sqlite datenbank erstellt
       aus den verschieden yaml datensätzen.
       class GenerateDatabase
       bl $MY_COOKBOOKS/utility*/create_database.rb
 --------------------------------------------------------------------------------
-(150) → Add a way to automatically download and repackage.
+(148) → Add a way to automatically download and repackage.
       if "is not in .tar.bz2 format"
       repackage_this_to('file.gz', 'file.bz2')
       repackage() # this method exists in Installer already.
       Must be tested first though.
 --------------------------------------------------------------------------------
-(151) → port @install_package
+(149) → port @install_package
 --------------------------------------------------------------------------------
-(152) → 3) add a script that can turn all traditional stuff into
+(150) → 3) add a script that can turn all traditional stuff into
       gobolinux variant. What does this even mean? Does this refer
       to traditional: f to traditional: t?
       hmmmm no clue. Remove the above at the end of 2020 if not resovled.
       (155) → @continue_after_configure_step = $?.success?
       ^^^ do we need that? hmm
 --------------------------------------------------------------------------------
-(153) → Run "make check" next if this was specified. Disabled for now
+(151) → Run "make check" next if this was specified. Disabled for now
 # though.
 # if sload.run_make_check
 #   opnn;e 'Now running '+make_command?+' check'
@@ -4306,14 +4524,14 @@
 # end
       ^^^ consider re-enabling make check again.
 --------------------------------------------------------------------------------
-(154) → Makefile.linux
+(152) → Makefile.linux
       ^^^ ensure that this can be a success.
 --------------------------------------------------------------------------------
-(155) → GNUmakefile
+(153) → GNUmakefile
       ^^^ support for this ? hmmmmmm.
       But how many programs support this?
 --------------------------------------------------------------------------------
-(156) → Enable to use the current working directory as input:
+(154) → Enable to use the current working directory as input:
       /Depot/jj/libxkbcommon-0.7.2/
       ^^^ such as this one here
       ry --use-current-working-directory-as-input
@@ -4326,7 +4544,7 @@
       This works almost - the build directory logic is incorrect.
       We may have to reconsider it.
 --------------------------------------------------------------------------------
-(157) → We should perhaps add a .yml file to determine whether to
+(155) → We should perhaps add a .yml file to determine whether to
       use shortcuts and abbreviations ... not sure if yes or
       not ... think about it.
       Actually the user should be able to determine whether
@@ -4340,10 +4558,10 @@
       ry ph --no-abbreviations
       and --use-abbreviations
 --------------------------------------------------------------------------------
-(158) → improve the steps necessary for a chroot, then switch it.
+(156) → improve the steps necessary for a chroot, then switch it.
       We need to improve all steps to upgrade glibc.
 --------------------------------------------------------------------------------
-(159) → -O3
+(157) → -O3
       add:
       rbt --sed -O3
       for -O3 optimziation
@@ -4354,30 +4572,7 @@
       we added support for this in june 2020. But this may have
       to be better optimized.
 --------------------------------------------------------------------------------
-(160) → trad  mate-panel-1.21.3.tar.xz
-      RBT::Compile: The program `matepanel1.21.3.tar.xz` could not be found. We thus can not
-      RBT::Compile: compile it and hence, can not continue. If this file should exist,
-      RBT::Compile: it could be found at:
-      /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/yaml/individual_cookbooks/matepanel1.21.3.tar.xz.yml
-      Traceback (most recent call last):
-      9: from /Users/x/DATA/PROGRAMMING_LANGUAGES/RUBY/src/roebe/lib/roebe/toplevel_methods/trad.rb:27:in `<main>'
-      8: from /Users/x/DATA/PROGRAMMING_LANGUAGES/RUBY/src/roebe/lib/roebe/toplevel_methods/trad.rb:14:in `trad'
-      7: from /Users/x/DATA/PROGRAMMING_LANGUAGES/RUBY/src/roebe/lib/roebe/toplevel_methods/trad.rb:14:in `new'
-      6: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/initialize.rb:140:in `initialize'
-      5: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/run.rb:28:in `run'
-      4: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/batch_compile_the_programs.rb:27:in `batch_compile_the_programs'
-      3: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/batch_compile_the_programs.rb:27:in `each'
-      2: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/batch_compile_the_programs.rb:28:in `block in batch_compile_the_programs'
-      1: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/do_compile_this_program.rb:231:in `do_compile_this_program'
-      /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/cookbook_dataset.rb:98:in
-      `archive_type?': undefined method `archive_type?' for nil:NilClass (NoMethodError)
-      ^^^^ das sollte automatisch splitten in version...
-      trad mate-panel-1.22.1.tar.xz
-      ^^^ das existiert auch lokal
-      aber das kompiliert net gscheit.
-      ^^^ DANNN hochladen.
---------------------------------------------------------------------------------
-(161) → enable:
+(158) → enable:
       autoupdate vala --only-libs
       autoupdate vala --only-libraries
       autoupdate gnomedesktop --only-libs
@@ -4387,7 +4582,7 @@
       to work very well? It works a bit. But not very well.
       ry scummvm --ntrad --use-this-version=2.1.2
 --------------------------------------------------------------------------------
-(162) → RBT::Compile: Overruling any potential traditional setting.
+(159) → RBT::Compile: Overruling any potential traditional setting.
       RBT::Compile: Setting to the specific version `2.1.2` now (for the program scummvm).
       RBT::Compile: The program `scummvm` will be compiled next.
       RBT::Compile: Removing the old directory at `/home/Temp/rbt/scummvm-30.06.2020/`.
@@ -4398,13 +4593,13 @@
       tar -xvf /home/x/src/scummvm/scummvm-30.06.2020.tar.xz -C /home/Temp/rbt/
       ^^^ why does this fail?
 --------------------------------------------------------------------------------
-(163) → 
+(160) → 
 # ======================================================================= #
 # We can register our program in a database now:
 # ======================================================================= #
       intercept_database_creation # maybe we want to create or modify databases
 --------------------------------------------------------------------------------
-(164) → ry binutils trad --use-this-version=binutils-2.29.tar.xz --dont-use-configure-options
+(161) → ry binutils trad --use-this-version=binutils-2.29.tar.xz --dont-use-configure-options
       RBT::Compile: Using a "traditional" strategy for compilation (which means prefix /usr/).
       RBT::Compile: Setting to the specific version `2.29` now (for the program binutils).
       RBT::Compile: No configure options will be used for this run.
@@ -4443,12 +4638,12 @@
       /Users/x/SRC/binutils/
       ^^^ BUG wir haben ja traditional gegeben...
 --------------------------------------------------------------------------------
-(165) → in rbt, reconsider "make use of cookbook aliases" setting
+(162) → in rbt, reconsider "make use of cookbook aliases" setting
       is it needed?
 --------------------------------------------------------------------------------
-(166) → enable openssl compilation
+(163) → enable openssl compilation
 --------------------------------------------------------------------------------
-(167) → --use-gnu-configure
+(164) → --use-gnu-configure
       ^^^ enayble this again to specificyll overrule anything
       else; and test it on pygtk
       start a success/failure thing
@@ -4461,7 +4656,7 @@
       @do_not_use_special_flags
       ^^^ fix this
 --------------------------------------------------------------------------------
-(168) → next step in the rbt-rewrite:
+(165) → next step in the rbt-rewrite:
       NEXT STEP:
       → FILE_BUILD_SYSTEM_PRIORITIES
       → FINISH porting all fo cookbooks!
@@ -4508,7 +4703,7 @@
       ^^^ fix this symlinking thing... the number
       should NOT be a part!!!!!!!
 --------------------------------------------------------------------------------
-(169) → in rbt ... add a configure option whether to use abbreviations or
+(166) → in rbt ... add a configure option whether to use abbreviations or
       not tothe main programs.
       enable:
       ntrad gobject-introspection-1.57.3.tar.xz
@@ -4526,7 +4721,7 @@
       ^^^ extract it
       or parse it into its constituents
 --------------------------------------------------------------------------------
-(170) → === Store the environment information at the time of compilation
+(167) → === Store the environment information at the time of compilation
       We should store the environment information into a file
       when we have compiled/installed a program.
       And then perhaps upload this somewhere as well, in the event
@@ -4546,442 +4741,137 @@
       only use it when using an AppDir installation though.
       or better, create it twice.
       once in a subdirectory in the log dir, and once in the
-      appdir.
-      ^^^ ok this has been added as of 27.09.2022. Now we
-      need to keep it that way and perhaps at a later
-      time remove this entry here.
---------------------------------------------------------------------------------
-(171) → 
-      in rbt create a new class that can associate all files
-      that belong to glibc into a standalone entry at /home/Programs/Glibc/ or so...
-      hmm. and a secondary backup dir first, say /opt/backup/glibc/
-      ^^^ enable this via rbt
-      and notify the user that this is EXPERIMENTAL! DONT USE IT!
-      This was created in September 2022.
---------------------------------------------------------------------------------
-(172) → The directory `/home/Programs/Webkitgtk/2.38.2/lib/` can not be created
-      as some target, or an incorrect symlink, already exists.
-      "BBBBBB"
-      RBT::CreateAppDirSkeleton: Creating the directory /home/Programs/Webkitgtk/2.38.2/man/
-      ^^^ this should show the leading opn part, which it currently does not
-      in this case. We may have to rewrite the underlying logic with
-      that namespace: namespace? in mind
---------------------------------------------------------------------------------
-(173) → In the local chroot set up muslc and test it ... hmm and compile
-      different glibc variants. We did already set up musl, but this
-      needs some more testing, at a later time.
---------------------------------------------------------------------------------
-(174) → add windows support and test it too.
-      well ... perhaps start with cmake first.
---------------------------------------------------------------------------------
-(175) → Offer an easy, simplified way to cross-compile for other
-      architectures. Make compiling great again! \o/
---------------------------------------------------------------------------------
-(176) → support for ruby-gtk3 at the least, and design it
-      precisely from that point of view FROM THE GET GO
-      hopefully so that it also works on WINDOWS
-      eventually!!!
-      ^^^ improve ruby-gtk3 parts
-      ^^^
---------------------------------------------------------------------------------
-(177) → ry M4 --ntrad --use-this-as-program-name=M62
-      ry M4 --ntrad --use-this-as-program-name=M62
-      ^^^ some bug - this is ignored. how strange :(
-      ^^^ THIS MUST BE FIXED
---------------------------------------------------------------------------------
-(178) → investigate how to turn this all into SQL statements.
-      and store it into a sql database via sequel
-      and query it
---------------------------------------------------------------------------------
-(179) → dnf install @kde-desktop-environment
-      ^^^ perhaps add this for rbt
-      so that @ can also be used to install "meta-packages"
-      ^^^ so the code should check if there is a LEADING part
-      before @ and if not then use the above^^^
---------------------------------------------------------------------------------
-(180) → create_debian_package
-      Unfinished method.
-      ry python deb
-      def create_debian_package
-      CreateDebianPackage.new(dataset?)
-      exit_program
-      end
-      ^^^ re-enable that
-      we must be able to create debian packages
---------------------------------------------------------------------------------
-(181) → add some way to check a system for its compile possibilities
-      e. g. a status "bar" that can also be shown in the
-      compile shell such as
-      GCC version is at bla
-      g++ is available yes/no
-      and so forth
-      system_compile_possibilities.rb
-      SystemCompilePossibilities
-      ^^^^ also document it then
-      also explain how this can be used
-      ^^^ add some class called
-      RBT::StoryTelling
-      it will tell us what this system has.
-      need to test this on a bare-bones system hmm.
-      isnt this envi? hmm.
-      Well, the functionality is already available via
-      envi ... Do we need a more sophisticated variant?
---------------------------------------------------------------------------------
-(182) → ./configure  LDFLAGS="-static -static-libgcc" CPPFLAGS="-static"  --disable-shared --enable-profiling --prefix=/root
-      make LDFLAGS="-static" LINKFORSHARED=" "
-      make install
-      ^^^ hmmmmmmmmmm ...
---------------------------------------------------------------------------------
-(183) → handle_binary_installation
-      ry supertux install
-      or
-      ry fox package
-      ry fox binary
-      def handle_binary_installation(input)
-      @install_package.handle_binary_installation(input) # bl $RBT/InstallPackage.rb
-      exit_program
---------------------------------------------------------------------------------
-(184) → run_as_user
-      re-enable this:
-      Run as a specific user. The argument `this_user` should be a string
-      that specifies the user_name, i.e. "root" or "debug". It will default
-      to the user name "root. If we are on windows, we will section for now.
-      The User "debug" would be this:
-      Process.egid =  100
-      Process.euid = 1000
-      def run_as_user(this_user = 'root')
-      unless is_on_windows?
-      _ = Users.new
-      this_user = _.superuser_name? if ['default','superuser'].include? this_user
-      new_euid, new_guid = _.fetch_user(this_user)
-      begin
-      Process.egid = new_guid
-      Process.euid = new_euid
-      rescue Errno::EPERM => error
-      opn; warn '[Notice] You do not seem to have sufficient permissions '+
-      'to alter the GroupID (gid).'
-      opn; fancy error
-      end
-      end
-      end
---------------------------------------------------------------------------------
-(185) → Re-enable: install_every_package
-# installs every package in PKG_DIR, uses method do_real_install to
-# really install a pkg.
-#
-# Invoke this method like so:
-#
-#   ry --install-every-package
-      def install_every_package
-      get_file_listing(@pkg_dir, true).each { |tmp|
-      do_real_install(tmp)
-      }
-      end
---------------------------------------------------------------------------------
-(186) → Allow for:
-      installer htop@3.1.2
-      that way we can avoid --use-this-program-version
-      ^^^
-      ^^^ must test the use-this-program-version= still
-      also fix the error problem...hmmm
---------------------------------------------------------------------------------
-(187) → Working with an existing binary should work as-is without
-      leading to compile problems. in
-      bin/ hmmm
-      we may have to infer things. Well actually...
-      11111^^^
-      (2) Must transition into more actions.
-      ^^^ make each compile task that makes sense an
-      action; perhaps prefix this via:
-      RBT.actions(:compile_step1)
-      or something like this hmm.
---------------------------------------------------------------------------------
-(188) → expand errors.yml
-      ^^^
---------------------------------------------------------------------------------
-(189) → Fix this:
-      → Introduce:
-      ry glib --version=2.18.3 --compile-version=2.16.33_TEST
-      ry glib@2.18.3 --compile-version=2.16.33_TEST
---------------------------------------------------------------------------------
-(190) → CLANG support:
-      add a way to automatically use clang for llvm ...
-      via rbt... not sure how but it would be simpler.
-      That works sort of but we need more experience here,
-      since it does not seem to work perfectly well.
-      (94) → http://developer.ubuntu.com/
-      ^^^ wenn das grundgerüst hier funktioniert, die Funktionalität
-      von RBT in eine ruby-gtk app reinpacken und auch dort publishen.
-      ah ja, add ruby-gtk support
---------------------------------------------------------------------------------
-(191) → make -f Makefile.linux
-      ^^^ this supprting
---------------------------------------------------------------------------------
-(192) → Implementiere folgendes (zur zeit geht das teilweise...
-      all_versions fungiert als compile_all_versions):
-      ry glib all_versions
-      ry glib all_versions ntrad
-      all_versions instruiert das man eben alle Versionen mittels
-      ntrad kompiliert.
-      ^^^ this works but requires class Chained so we first
-      must port it to the new infrastructure, which has
-      became ChainedCompiler.
---------------------------------------------------------------------------------
-(193) → To stop something from being updated/upgraded:
-      brew pin <formula>
-      ^^^ enable this in rbt
-      rbt pin htop
-      rbt --pin htop
-      ^^^ add into a local .yml file
-      ^^^ notify the user about this
-      and then when doing:
-      rbt htop
-      opne "htop can not be installed because it is pinned down."
-      opne to unpin do:
-      rbt unpin htop
-      rbt --unpin htop
-      when pinning, also store the version
-      so that in the future we may pin only certain versions
-      also add a
-      --forbid-installation-of
-      ^^^ and document all of this.
---------------------------------------------------------------------------------
-(194) → Look at strace. Perhaps we can trace the file calls
-      in question.
---------------------------------------------------------------------------------
-(195) → We should test updating glibc on some computer system - anywhere.
-      Possibly for this, we also need a chrooted environment.
-      I guess it is best to simply copy /Depot/Chroot/home/Programs/
-      onto a usb stick, then transfer it downstairs.
-      Ideally for this we should have compiled all new programs already
-      as-is.
---------------------------------------------------------------------------------
-(196) → Add some way to upload binary packages or so on ftp, named with
-      the particular glibc version that was used to compile it. This
-      should be some repository where I can host important packages.
-      Hmmmmm. We can simply package the app-dir at hand.
---------------------------------------------------------------------------------
-(197) → 3) No package 'libmate-menu' found
-      ^^^ das sollte einen vorschlag liefern wie man das löst
-      also zum beispiel
-      "One suggested way to solve the above issue is by doing:
-      rbt matemenus
-      yup das geht an sich... den fehler oben müssen wir aber noch
-      testen so das es einen guten vorschlag gibt.
-      Hmm eher doch nicht ... oder an sich schon.
-      Zerst einmal über aliases lösen: ok das hier gelöst.
-      wir suchen etwas
-      Wir müssen das noch ausführen... gibt es ein Programm?
-      mate-control-center zeigt diesen fehleran
-      ^^^ auch dokumentieren sobald das geht
-      mate-control-center
-      well this kind of sucks
-      I guess the whole problem+error detection has to be written
-      anew, since right now it is just horrible.
+      appdir.
+      ^^^ ok this has been added as of 27.09.2022. Now we
+      need to keep it that way and perhaps at a later
+      time remove this entry here.
 --------------------------------------------------------------------------------
-(198) → 4) add a toolchain into /home/Programs
-      hmm:
-      /home/Programs/Toolchain
-      ^^^ without versioning for now.
-      This should be used for bootstrapping a linux system.
+(168) → 
+      in rbt create a new class that can associate all files
+      that belong to glibc into a standalone entry at /home/Programs/Glibc/ or so...
+      hmm. and a secondary backup dir first, say /opt/backup/glibc/
+      ^^^ enable this via rbt
+      and notify the user that this is EXPERIMENTAL! DONT USE IT!
+      This was created in September 2022.
 --------------------------------------------------------------------------------
-(199) → 1) REWRITE RBT FROM THE GET GO !!!!
+(169) → The directory `/home/Programs/Webkitgtk/2.38.2/lib/` can not be created
+      as some target, or an incorrect symlink, already exists.
+      "BBBBBB"
+      RBT::CreateAppDirSkeleton: Creating the directory /home/Programs/Webkitgtk/2.38.2/man/
+      ^^^ this should show the leading opn part, which it currently does not
+      in this case. We may have to rewrite the underlying logic with
+      that namespace: namespace? in mind
 --------------------------------------------------------------------------------
-(200) → 1) Add the possibility to use abbreviations again, but make it optional.
-      The user should be able to toggle this behaviour on the commandline.
-      Document this as well.
-      THEN TRANSFER TO THE OTHER COMPUTER. Huh? What other computer?
-      hmmm.
+(170) → In the local chroot set up muslc and test it ... hmm and compile
+      different glibc variants. We did already set up musl, but this
+      needs some more testing, at a later time.
 --------------------------------------------------------------------------------
-(201) → 3) Creating GoboLinux Recipes
-      Enable homepage: setting in cookbooks though
-      AND then use it in the gobo recipes too. Should
-      check for some more goborecipes ^^^ via homepage.
-      gobolinux.tar.xz
-      ^^^ also package that up automatically and then
-      upload to a FTP site.
-      ^^^ work on this and when it works, announce it on the
-      gobolinux mailing list as well.
+(171) → add windows support and test it too.
+      well ... perhaps start with cmake first.
 --------------------------------------------------------------------------------
-(202) → 3) Rewrite the whole rbt logic... make use of the internal
-      hash more frequently rather than a billion ivars. ALSO,
-      from the beginning make sure that w... ah well.
+(172) → Offer an easy, simplified way to cross-compile for other
+      architectures. Make compiling great again! \o/
 --------------------------------------------------------------------------------
-(203) → 4) Flexiblere Plugin Architektur?
-      Cmake und Scons Support verbessern. Das ganze sollte abstrahiert
-      werden so das man beliebige Tools verwenden kann.
-      So das man eine konsistente API verwenden kann.
+(173) → support for ruby-gtk3 at the least, and design it
+      precisely from that point of view FROM THE GET GO
+      hopefully so that it also works on WINDOWS
+      eventually!!!
+      ^^^ improve ruby-gtk3 parts
+      ^^^
 --------------------------------------------------------------------------------
-(204) → →
-      RBT::Compile: Something went wrong via `cmake`.
-      RBT::Compile: Something went wrong via `cmake`.
-      ^^^^^^^^ Don't run this twice; and make the reporting better in general.
-      ^^^^^^^^ remove this error. Why does it happen twice anyway
-      and why is this so unspecific?
-      ^^^ guess we have to go through the whole logic and redo it. Grrrrr.
-      hmm.
-      Perhaps create a new class that does handle this.
-      → ONE CLASS TO RULE ALL THE ERRORS.
-      class RBT::ProblemsAndErrors
-      ^^^ but study first how to do so.
-      We should decide what this class must be able to do:
-      a) distinguish between PROBLEMs and ERRORS
-      b) use the method .detect() on the given line to detect
-      which problems exist.
-      c) add the possibility to suggest useful solutions to
-      the end user.
-      d) store findings on the toplevel e.g.
-      RBT.problems?
-      and
-      RBT.errors?
-      ^^^ but do not remove the old code for the time
-      being - instead add the above ADDITIONALLY.
-      also ... add logging support from the beginning,
-      and store the time snaptshots for that.
-      ^^^ rework the error logic ...
-      THE WHOLE ERROR LOGIC .......
+(174) → ry M4 --ntrad --use-this-as-program-name=M62
+      ry M4 --ntrad --use-this-as-program-name=M62
+      ^^^ some bug - this is ignored. how strange :(
+      ^^^ THIS MUST BE FIXED
 --------------------------------------------------------------------------------
-(205) → ry gcc ntrad --reuse-old-configure-options
-      RBT::Compile: Re-using the old configure option, which was `--prefix=/Programs/Gcc/8.1.0 --enable-languages=c,c++,lto,objc,fortran --enable-shared --disable-static --disable-multilib --target=x86_64-slackware-linux --build=x86_64-slackware-linux --host=x86_64-slackware-linux --disable-libunwind-exceptions --enable-bootstrap --enable-linker-build-id`.
-      RBT::Compile: Now entering the directory `/Depot/Temp/rbt/gcc-8.3.0/BUILD_DIRECTORY/`.
-      --prefix=/Programs/Gcc/8.3.0/ --enable-languages=c,c++,lto,objc,fortran --enable-shared --disable-static --disable-multilib --target=x86_64-slackware-linux --build=x86_64-slackware-linux --host=x86_64-slackware-linux --disable-libunwind-exceptions --enable-bootstrap --enable-linker-build-id
-      Traceback (most recent call last):
-      13: from /Programs/Ruby/2.6.1/bin/rbt:13:in `<main>'
-      12: from /Programs/Ruby/2.6.1/bin/rbt:13:in `new'
-      11: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/commandline/commandline_interface.rb:60:in `initialize'
-      10: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/commandline/commandline_interface.rb:60:in `new'
-      9: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/initialize.rb:145:in `initialize'
-      8: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/run.rb:23:in `run'
-      7: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:34:in `menu'
-      6: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:34:in `each'
-      5: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:34:in `block in menu'
-      4: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/menu.rb:430:in `menu'
-      3: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/misc.rb:988:in `reuse_old_configure_options'
-      2: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/misc.rb:934:in `run_configure_make_and_make_install_with_this_configure_line'
-      1: from /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/configure.rb:53:in `run_the_configure_command'
-      /Programs/Ruby/2.6.1/lib/ruby/site_ruby/2.6.0/rbt/compile/prefix.rb:247:
-      in `prefix?': undefined method `end_with?' for :use_ntrad_prefix_at_a_later_time:Symbol (NoMethodError)
-      ^^^^ hmmmmmmm,mmmmmmm
+(175) → investigate how to turn this all into SQL statements.
+      and store it into a sql database via sequel
+      and query it
 --------------------------------------------------------------------------------
-(206) → ntrad glib --use-this-version=glib-2.54.3.tar.xz
-      RBT::Compile: Setting to the specific version `2.54.3` now.
-      RBT::Compile: The program `glib` will be compiled/installed next.
-      = Infobox ======================================================================
-      |                               |                                              |
-      | Compiling this program:       | glib                                         |
-      | Prefix:                       | /Programs/Glib/2.54.3/                       |
-      | Program version:              | 2.54.3                                       |
-      | Program path:                 | /Users/x/SRC/glib/glib-2.54.3.tar.xz         |
-      | Keep the archive extracted:   | Yes.                                         |
-      | Will be extracted towards:    | /Depot/Temp/rbt/glib-2.54.3/                 |
-      | Will ccache be used:          | Yes.                                         |
-      | CFLAGS in use:                | -O2 -fPIC -fno-strict-overflow -Wno-error    |
-      | Use a build directory:        | Yes.                                         |
-      | configure options:            | -Dman=true -Dselinux=false                   |
-      | Host architecture in use:     | x86_64                                       |
-      |                               |                                              |
-      ================================================================================
-      qdbus: symbol lookup error: /Programs/Qt/5.11.2/bin/../lib/libQt5Core.so.5: undefined symbol: ucnv_getDefaultName_56
-      RBT→ Extracter: Extracting `glib-2.54.3.tar.xz` to /Depot/Temp/rbt/ next.
-      RBT→ Extracter:   tar -xvf /Users/x/SRC/glib/glib-2.54.3.tar.xz -C /Depot/Temp/rbt/
-      RBT→ Extracter: Finished extracting to `/Depot/Temp/rbt/glib-2.54.3/`.
-      RBT::Compile: Entering the directory /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/
-      RBT::Compile: Now entering the directory `/Depot/Temp/rbt/glib-/Programs/Glib/2.54.3//BUILD_DIRECTORY/`.
-      RBT::CreateProgram: Glib-2.54.3 (Program name: Glib and Program Version: 2.54.3)
-      RBT::CreateProgram: The target directory will be at `/Programs/Glib/2.54.3/`.
-      RBT::CreateProgram: Creating directory /Programs/Glib/2.54.3/ next.
-      RBT::CreateProgram: Several subdirectories will now be created in that directory, namely:
-      RBT::CreateProgram:   bin/, include/, lib/, man/, sbin/, Shared/, Resources/
-      RBT::CreateProgram: Done!
-      RBT→ Symlink: Symlinking /Programs/Glib/2.54.3/ into /Programs/Glib/Current.
-      ================================================================================
-      CC="ccache gcc" /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/configure --prefix=/Programs/Glib/2.54.3/ -Dman=true -Dselinux=false 2>&1
-      ================================================================================
-      sh: /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/configure: No such file or directory
-      Now running `make` from /Depot/Temp/rbt/glib-/Programs/Glib/2.54.3/BUILD_DIRECTORY/.
-      make: *** No targets specified and no makefile found.  Stop.
-      RBT::Compile: The program `glib` could not be installed.
-      ^^^ da stimmt was nit beim verzeichnis... das wo das extracted wird
+(176) → dnf install @kde-desktop-environment
+      ^^^ perhaps add this for rbt
+      so that @ can also be used to install "meta-packages"
+      ^^^ so the code should check if there is a LEADING part
+      before @ and if not then use the above^^^
 --------------------------------------------------------------------------------
-(207) → sh: meson: command not found
-      ^^^
-      RBT::Compile: The program `appstream` will be compiled/installed next.
-      = Infobox ========================================================================
-      |                               |                                                |
-      | Compiling this program:       | AppStream                                      |
-      | Prefix:                       | /usr/                                          |
-      | Program version:              | 0.12.0                                         |
-      | Program path:                 | /Users/x/SRC/appstream/AppStream-0.12.0.tar.xz |
-      | Keep the archive extracted:   | Yes.                                           |
-      | Will be extracted towards:    | /Depot/Temp/rbt/AppStream-0.12.0/              |
-      | Will ccache be used:          | Yes.                                           |
-      | CFLAGS in use:                | -O2 -fPIC -fno-strict-overflow -Wno-error      |
-      | Use a build directory:        | Yes.                                           |
-      | Host architecture in use:     | x86_64                                         |
-      |                               |                                                |
-      ==================================================================================
-      RBT→ Extracter: Extracting `AppStream-0.12.0.tar.xz` to /Depot/Temp/rbt/ next.
-      RBT→ Extracter:   tar -xvf /Users/x/SRC/appstream/AppStream-0.12.0.tar.xz -C /Depot/Temp/rbt/
-      RBT→ Extracter: Finished extracting to `/Depot/Temp/rbt/AppStream-0.12.0/`.
-      RBT::Compile: Entering the directory /Depot/Temp/rbt/AppStream-0.12.0/
-      RBT::Compile: Now entering the directory `/Depot/Temp/rbt/AppStream-0.12.0/BUILD_DIRECTORY/`.
-      meson --prefix=/usr/
-      sh: meson: command not found
-      RBT::Compile: No file called build.ninja could be found - thus,
-      RBT::Compile: the build tool called ninja can not be run.
-      Unregistered error: could_not_find_file_called_build_ninja (class: Symbol)
-      RBT::Compile: The program `appstream` could not be installed.
-      ^^^^ reigster this too to
-      switch python
-      if is on roebe and
-      /Programs/Python/ exists with at the least
-      one python version
+(177) → create_debian_package
+      Unfinished method.
+      ry python deb
+      def create_debian_package
+      CreateDebianPackage.new(dataset?)
+      exit_program
+      end
+      ^^^ re-enable that
+      we must be able to create debian packages
 --------------------------------------------------------------------------------
-(208) → See any operating system documentation about shared libraries for
-      more information, such as the ldand ld.so(8) manual pages.
+(178) → add some way to check a system for its compile possibilities
+      e. g. a status "bar" that can also be shown in the
+      compile shell such as
+      GCC version is at bla
+      g++ is available yes/no
+      and so forth
+      system_compile_possibilities.rb
+      SystemCompilePossibilities
+      ^^^^ also document it then
+      also explain how this can be used
+      ^^^ add some class called
+      RBT::StoryTelling
+      it will tell us what this system has.
+      need to test this on a bare-bones system hmm.
+      isnt this envi? hmm.
+      Well, the functionality is already available via
+      envi ... Do we need a more sophisticated variant?
 --------------------------------------------------------------------------------
-(209) → /usr/bin/mkdir -p '/usr/share/gir-1.0/'
-      /usr/bin/ginstall -c -m 644 Thunarx-3.0.gir '/usr/share/gir-1.0/'
-      /usr/bin/mkdir -p '/usr/include/thunarx-3/thunarx'
-      /usr/bin/ginstall -c -m 644 thunarx.h thunarx-config.h thunarx-file-info.h thunarx-menu.h thunarx-menu-item.h thunarx-menu-provider.h thunarx-preferences-provider.h thunarx-property-page.h thunarx-property-page-provider.h thunarx-provider-factory.h thunarx-provider-module.h thunarx-provider-plugin.h thunarx-renamer.h thunarx-renamer-provider.h '/usr/include/thunarx-3/thunarx'
-      /usr/bin/mkdir -p '/usr/lib/pkgconfig'
-      /usr/bin/ginstall -c -m 644 thunarx-3.pc '/usr/lib/pkgconfig'
-      /usr/bin/mkdir -p '/usr/lib/girepository-1.0/'
-      /usr/bin/ginstall -c -m 644 Thunarx-3.0.typelib '/usr/lib/girepository-1.0/'
-      make[2]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunarx'
-      make[1]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunarx'
-      Making install in thunar
-      make[1]: Entering directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'
-      make  install-am
-      make[2]: Entering directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'
-      CCLD     thunar
-      libtool:   error: cannot find the library '/usr/lib64/libudev.la' or unhandled argument '/usr/lib64/libudev.la'
-      make[2]: *** [Makefile:910: thunar] Error 1
-      make[2]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'
-      make[1]: *** [Makefile:2473: install] Error 2
-      make[1]: Leaving directory '/Depot/Temp/rbt/Thunar-1.8.1/thunar'^
-      ^^^ autofix?
+(179) → ./configure  LDFLAGS="-static -static-libgcc" CPPFLAGS="-static"  --disable-shared --enable-profiling --prefix=/root
+      make LDFLAGS="-static" LINKFORSHARED=" "
+      make install
+      ^^^ hmmmmmmmmmm ...
 --------------------------------------------------------------------------------
-(210) → installation_steps:
-      - make
-      - make install DESTDIR=$MY_PROGRAMS/Ncompress/PROGRAM_VERSION
-      ^^^^ installation steps seems
-      to be bugged
-      debug this
-      ncompress has that problem right now
+(180) → handle_binary_installation
+      ry supertux install
+      or
+      ry fox package
+      ry fox binary
+      def handle_binary_installation(input)
+      @install_package.handle_binary_installation(input) # bl $RBT/InstallPackage.rb
+      exit_program
+--------------------------------------------------------------------------------
+(181) → run_as_user
+      re-enable this:
+      Run as a specific user. The argument `this_user` should be a string
+      that specifies the user_name, i.e. "root" or "debug". It will default
+      to the user name "root. If we are on windows, we will section for now.
+      The User "debug" would be this:
+      Process.egid =  100
+      Process.euid = 1000
+      def run_as_user(this_user = 'root')
+      unless is_on_windows?
+      _ = Users.new
+      this_user = _.superuser_name? if ['default','superuser'].include? this_user
+      new_euid, new_guid = _.fetch_user(this_user)
+      begin
+      Process.egid = new_guid
+      Process.euid = new_euid
+      rescue Errno::EPERM => error
+      opn; warn '[Notice] You do not seem to have sufficient permissions '+
+      'to alter the GroupID (gid).'
+      opn; fancy error
+      end
+      end
+      end
 --------------------------------------------------------------------------------
-(211) → add:
+(208) → add:
       pre_make_install:
       or something like that...
       for isoode
 --------------------------------------------------------------------------------
-(212) → /Programs/Gtksourceview/Current/share/gir-1.0//usr/share/gir-1.0
+(209) → /Programs/Gtksourceview/Current/share/gir-1.0//usr/share/gir-1.0
       bash: /usr/share/gir-1.0: Is a directory
       /Programs/Gtksourceview/Current/share/gir-1.0/cp GtkSource-3.0.gir  /usr/share/gir-1.0
       'GtkSource-3.0.gir' - '/usr/share/gir-1.0/GtkSource-3.0.gir'
       ^^^^ the file exists but it has to be symlinked...
 --------------------------------------------------------------------------------
-(213) → Add a way to parse dependencies of a given program automatically.
+(210) → Add a way to parse dependencies of a given program automatically.
       Right now I have absolutely no idea how to do this though. If
       you have an idea, let me know. IF this parsing of dependencies
       is possible, then we will gather this information inside
@@ -4994,17 +4884,17 @@
       *** to build GTK+.
       ])
 --------------------------------------------------------------------------------
-(214) → convert to non-traditional
+(211) → convert to non-traditional
       must be rewritten. it makes no longer sense.
 --------------------------------------------------------------------------------
-(215) → add an interactive compile-shell
+(212) → add an interactive compile-shell
       the idea here is to continually run that compile-shell and keep
       on compiling and installing stuff, constantly showing to the
       user the current status e. g. what is installed, what can be
       upgraded and what not. the idea here is to completely finish
       all tasks from within that interactive compile shell.
 --------------------------------------------------------------------------------
-(216) → rbt config?
+(213) → rbt config?
       RBT::Action::Installer: We will show the configuration options set for the RBT project next.
       /usr/lib/ruby/site_ruby/3.3.0/rbt/actions/individual_actions/installer/installer.rb:11665:in
       `block in feedback_main_config': undefined method `_' for an instance of RBT::Configuration::SimpleConfigurationLoader (NoMethodError)