raygun4ruby 3.2.0 → 3.2.5.pre

data/spec/dummy/bin/rake

@@ -1,4 +1,9 @@
-#!/usr/bin/env ruby
-require_relative '../config/boot'
-require 'rake'
-Rake.application.run
+#!/usr/bin/env ruby
+begin
+  load File.expand_path('../spring', __FILE__)
+rescue LoadError => e
+  raise unless e.message.include?('spring')
+end
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/spec/dummy/bin/setup

@@ -1,36 +1,29 @@
-#!/usr/bin/env ruby
-require 'fileutils'
-include FileUtils
-
-# path to your application root.
-APP_ROOT = File.expand_path('..', __dir__)
-
-def system!(*args)
-  system(*args) || abort("\n== Command #{args} failed ==")
-end
-
-chdir APP_ROOT do
-  # This script is a starting point to setup your application.
-  # Add necessary setup steps to this file.
-
-  puts '== Installing dependencies =='
-  system! 'gem install bundler --conservative'
-  system('bundle check') || system!('bundle install')
-
-  # Install JavaScript dependencies if using Yarn
-  # system('bin/yarn')
-
-  # puts "\n== Copying sample files =="
-  # unless File.exist?('config/database.yml')
-  #   cp 'config/database.yml.sample', 'config/database.yml'
-  # end
-
-  puts "\n== Preparing database =="
-  system! 'bin/rails db:setup'
-
-  puts "\n== Removing old logs and tempfiles =="
-  system! 'bin/rails log:clear tmp:clear'
-
-  puts "\n== Restarting application server =="
-  system! 'bin/rails restart'
-end
+#!/usr/bin/env ruby
+require 'pathname'
+
+# path to your application root.
+APP_ROOT = Pathname.new File.expand_path('../../',  __FILE__)
+
+Dir.chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file:
+
+  puts "== Installing dependencies =="
+  system "gem install bundler --conservative"
+  system "bundle check || bundle install"
+
+  # puts "\n== Copying sample files =="
+  # unless File.exist?("config/database.yml")
+  #   system "cp config/database.yml.sample config/database.yml"
+  # end
+
+  puts "\n== Preparing database =="
+  system "bin/rake db:setup"
+
+  puts "\n== Removing old logs and tempfiles =="
+  system "rm -f log/*"
+  system "rm -rf tmp/cache"
+
+  puts "\n== Restarting application server =="
+  system "touch tmp/restart.txt"
+end

data/spec/dummy/bin/spring

@@ -0,0 +1,17 @@
+#!/usr/bin/env ruby
+
+# This file loads spring without using Bundler, in order to be fast.
+# It gets overwritten when you run the `spring binstub` command.
+
+unless defined?(Spring)
+  require 'rubygems'
+  require 'bundler'
+
+  lockfile = Bundler::LockfileParser.new(Bundler.default_lockfile.read)
+  spring = lockfile.specs.detect { |spec| spec.name == "spring" }
+  if spring
+    Gem.use_paths Gem.dir, Bundler.bundle_path.to_s, *Gem.path
+    gem 'spring', spring.version
+    require 'spring/binstub'
+  end
+end

data/spec/dummy/config.ru

@@ -1,5 +1,4 @@
-# This file is used by Rack-based servers to start the application.
-
-require_relative 'config/environment'
-
-run Rails.application
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment', __FILE__)
+run Rails.application

data/spec/dummy/config/application.rb

@@ -1,18 +1,26 @@
-require_relative 'boot'
-
-require 'rails/all'
-
-Bundler.require(*Rails.groups)
-
-module Dummy
-  class Application < Rails::Application
-    # Initialize configuration defaults for originally generated Rails version.
-    config.load_defaults 5.2
-
-    # Settings in config/environments/* take precedence over those specified here.
-    # Application configuration can go into files in config/initializers
-    # -- all .rb files in that directory are automatically loaded after loading
-    # the framework and any gems in your application.
-  end
-end
-
+require File.expand_path('../boot', __FILE__)
+
+require 'rails/all'
+
+# Require the gems listed in Gemfile, including any gems
+# you've limited to :test, :development, or :production.
+Bundler.require(*Rails.groups)
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+
+    # Do not swallow errors in after_commit/after_rollback callbacks.
+    config.active_record.raise_in_transactional_callbacks = true
+  end
+end

data/spec/dummy/config/boot.rb

@@ -1,5 +1,3 @@
-# Set up gems listed in the Gemfile.
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../Gemfile', __dir__)
-
-require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
-$LOAD_PATH.unshift File.expand_path('../../../lib', __dir__)
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+
+require 'bundler/setup' # Set up gems listed in the Gemfile.

data/spec/dummy/config/database.yml

@@ -1,25 +1,25 @@
-# SQLite version 3.x
-#   gem install sqlite3
-#
-#   Ensure the SQLite 3 gem is defined in your Gemfile
-#   gem 'sqlite3'
-#
-default: &default
-  adapter: sqlite3
-  pool: <%= ENV.fetch("RAILS_MAX_THREADS") { 5 } %>
-  timeout: 5000
-
-development:
-  <<: *default
-  database: db/development.sqlite3
-
-# Warning: The database defined as "test" will be erased and
-# re-generated from your development database when you run "rake".
-# Do not set this db to the same as development or production.
-test:
-  <<: *default
-  database: db/test.sqlite3
-
-production:
-  <<: *default
-  database: db/production.sqlite3
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: 5
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

data/spec/dummy/config/environment.rb

@@ -1,5 +1,5 @@
-# Load the Rails application.
-require_relative 'application'
-
-# Initialize the Rails application.
-Rails.application.initialize!
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/spec/dummy/config/environments/development.rb

@@ -1,61 +1,41 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports.
-  config.consider_all_requests_local = true
-
-  # Enable/disable caching. By default caching is disabled.
-  # Run rails dev:cache to toggle caching.
-  if Rails.root.join('tmp', 'caching-dev.txt').exist?
-    config.action_controller.perform_caching = true
-
-    config.cache_store = :memory_store
-    config.public_file_server.headers = {
-      'Cache-Control' => "public, max-age=#{2.days.to_i}"
-    }
-  else
-    config.action_controller.perform_caching = false
-
-    config.cache_store = :null_store
-  end
-
-  # Store uploaded files on the local file system (see config/storage.yml for options)
-  config.active_storage.service = :local
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  config.action_mailer.perform_caching = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Highlight code that triggered database queries in logs.
-  config.active_record.verbose_query_logs = true
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Suppress logger output for asset requests.
-  config.assets.quiet = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-
-  # Use an evented file watcher to asynchronously detect changes in source code,
-  # routes, locales, etc. This feature depends on the listen gem.
-  # config.file_watcher = ActiveSupport::EventedFileUpdateChecker
-end
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/environments/production.rb

@@ -1,94 +1,79 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
-  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
-  # config.require_master_key = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Store uploaded files on the local file system (see config/storage.yml for options)
-  config.active_storage.service = :local
-
-  # Mount Action Cable outside main process or domain
-  # config.action_cable.mount_path = nil
-  # config.action_cable.url = 'wss://example.com/cable'
-  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  config.log_tags = [ :request_id ]
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Use a real queuing backend for Active Job (and separate queues per environment)
-  # config.active_job.queue_adapter     = :resque
-  # config.active_job.queue_name_prefix = "dummy_#{Rails.env}"
-
-  config.action_mailer.perform_caching = false
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Use a different logger for distributed setups.
-  # require 'syslog/logger'
-  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
-
-  if ENV["RAILS_LOG_TO_STDOUT"].present?
-    logger           = ActiveSupport::Logger.new(STDOUT)
-    logger.formatter = config.log_formatter
-    config.logger    = ActiveSupport::TaggedLogging.new(logger)
-  end
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
-end
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end