rails_blog_engine 0.0.1 → 0.0.2

data/spec/acceptance/support/paths.rb

@@ -0,0 +1,5 @@
+# Put helper methods related to the paths in your application here.
+module NavigationHelpers
+end
+
+RSpec.configuration.include NavigationHelpers, :type => :acceptance

data/spec/controllers/rails_blog_engine/comments_controller_spec.rb

@@ -0,0 +1,22 @@
+require 'spec_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+
+describe RailsBlogEngine::CommentsController do
+end

data/spec/controllers/rails_blog_engine/posts_controller_spec.rb

@@ -0,0 +1,81 @@
+# -*- coding: utf-8 -*-
+require 'spec_helper'
+
+describe RailsBlogEngine::PostsController do
+  include Devise::TestHelpers
+
+  render_views
+
+  describe "GET '/blog/posts.atom'" do
+    before do
+      base = Time.utc(2011, 01, 02)
+      @user = User.make!(:email => 'jdoe@example.com')
+      @posts = (0...20).map do |i|
+        RailsBlogEngine::Post.make!(:published,
+                                    :published_at => base + i.seconds,
+                                    :title => "Title #{i}",
+                                    :body => "Body #{i}",
+                                    :permalink => "permalink-#{i}",
+                                    :author => @user)
+      end
+      @updated_post = @posts[15]
+      @updated_post.updated_at = Time.now
+      @updated_post.save!
+      @unpublished = RailsBlogEngine::Post.make!(:title => "Unpublished")
+    end
+
+    before do
+      get :index, :format => 'atom', :use_route => :rails_blog_engine
+      response.should be_success
+    end
+
+    it "has an ATOM MIME type" do
+      response.content_type.should == 'application/atom+xml'
+    end
+
+    it "has a UTF-8 encoding" do
+      response.body.should match(/encoding="UTF-8"/)
+    end
+
+    it "returns an ATOM feed header" do
+      #puts response.body
+      response.body.should have_selector('feed')
+      response.body.should have_selector('link[@rel="alternate"][@type="text/html"][@href="http://test.host/blog/"]')
+      response.body.should have_selector('link[@rel="self"][@type="application/atom+xml"][@href="http://test.host/blog/posts.atom"]')
+      expected_title = I18n.t('rails_blog_engine.blog.title')
+      response.body.should have_selector('title', :text => expected_title)
+    end
+
+    it "reports when the feed was last updated" do
+      last_update = @updated_post.updated_at.iso8601
+      response.body.should have_selector('updated', :text => last_update)
+    end
+
+    it "includes recent, published posts in the ATOM feed" do
+      response.body.should have_selector('entry title', :text => "Title 19")
+      response.body.should_not have_selector('entry title', :text => "Title 3")
+      response.body.should_not have_selector('entry title',
+                                             :text => "Unpublished")
+    end
+
+    context "each entry" do
+      it "includes publication times, not creation times" do
+        published_at = @posts.last.published_at.iso8601
+        response.body.should have_selector('entry published',
+                                  :text => published_at)
+      end
+
+      it "includes author information" do
+        response.body.should have_selector('entry author name', :text => "jdoe")
+      end
+
+      it "links to the post by permalink" do
+        response.body.should have_selector('entry link[@rel="alternate"][@type="text/html"][@href="http://test.host/blog/2011/01/02/permalink-19"]')
+      end
+
+      it "includes the formatted body text" do
+        response.body.should have_selector('entry content', :content => "Body")
+      end
+    end
+  end
+end

data/spec/dummy/Rakefile

@@ -0,0 +1,7 @@
+#!/usr/bin/env rake
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Dummy::Application.load_tasks

data/spec/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,10 @@
+// This is a manifest file that'll be compiled into including all the files listed below.
+// Add new JavaScript/Coffee code in separate files in this directory and they'll automatically
+// be included in the compiled file accessible from http://example.com/assets/application.js
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// the compiled file.
+//
+//= require jquery
+//= require jquery_ujs
+//= require rails_blog_engine
+//= require_tree .

data/spec/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,8 @@
+/*
+ * This is a manifest file that'll automatically include all the stylesheets available in this directory
+ * and any sub-directories. You're free to add application-wide styles to this file and they'll appear at
+ * the top of the compiled file, but it's generally better to create a new file per style scope.
+ *= require_self
+ *= require rails_blog_engine
+ *= require_tree . 
+*/

data/spec/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,3 @@
+class ApplicationController < ActionController::Base
+  protect_from_forgery
+end

data/spec/dummy/app/controllers/home_controller.rb

@@ -0,0 +1,4 @@
+class HomeController < ApplicationController
+  def index
+  end
+end

data/spec/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/spec/dummy/app/models/ability.rb

@@ -0,0 +1,11 @@
+class Ability
+  include CanCan::Ability
+  include RailsBlogEngine::Ability
+
+  def initialize(user)
+    can_read_blog
+    if user
+      can_manage_blog
+    end
+  end
+end

data/spec/dummy/app/models/user.rb

@@ -0,0 +1,9 @@
+class User < ActiveRecord::Base
+  # Include default devise modules. Others available are:
+  # :token_authenticatable, :encryptable, :confirmable, :lockable, :timeoutable and :omniauthable
+  devise :database_authenticatable, :registerable,
+         :recoverable, :rememberable, :trackable, :validatable
+
+  # Setup accessible (or protected) attributes for your model
+  attr_accessible :email, :password, :password_confirmation, :remember_me
+end

data/spec/dummy/app/views/home/index.html.haml

@@ -0,0 +1,2 @@
+%p
+  %a(href="/blog") Blog engine demo

data/spec/dummy/app/views/layouts/application.html.erb

@@ -0,0 +1,15 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title><%= yield(:title) %></title>
+  <%= stylesheet_link_tag    "application" %>
+  <%= javascript_include_tag "application" %>
+  <%= csrf_meta_tags %>
+  <%= yield(:head) %>
+</head>
+<body>
+
+<%= yield %>
+
+</body>
+</html>

data/spec/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment',  __FILE__)
+run Dummy::Application

data/spec/dummy/config/application.rb

@@ -0,0 +1,54 @@
+require File.expand_path('../boot', __FILE__)
+
+require 'rails/all'
+
+Bundler.require
+require "rails_blog_engine"
+
+require "devise"
+require "cancan"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Custom directories with classes and modules you want to be autoloadable.
+    # config.autoload_paths += %W(#{config.root}/extras)
+
+    # Only load the plugins named here, in the order given (default is alphabetical).
+    # :all can be used as a placeholder for all plugins not explicitly named.
+    # config.plugins = [ :exception_notification, :ssl_requirement, :all ]
+
+    # Activate observers that should always be running.
+    # config.active_record.observers = :cacher, :garbage_collector, :forum_observer
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+
+    # Configure the default encoding used in templates for Ruby 1.9.
+    config.encoding = "utf-8"
+
+    # Configure sensitive parameters which will be filtered from the log file.
+    config.filter_parameters += [:password]
+
+    # Enable the asset pipeline
+    config.assets.enabled = true
+
+    # Version of your assets, change this if you want to expire all your assets
+    config.assets.version = '1.0'
+
+    # Override some of standard generators.
+    config.generators do |g|
+      g.test_framework :rspec, :fixture => false, :view_specs => false
+      g.fixture_replacement :machinist
+    end
+  end
+end
+

data/spec/dummy/config/boot.rb

@@ -0,0 +1,10 @@
+require 'rubygems'
+gemfile = File.expand_path('../../../../Gemfile', __FILE__)
+
+if File.exist?(gemfile)
+  ENV['BUNDLE_GEMFILE'] = gemfile
+  require 'bundler'
+  Bundler.setup
+end
+
+$:.unshift File.expand_path('../../../../lib', __FILE__)

data/spec/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+development:
+  adapter: sqlite3
+  database: db/development.sqlite3
+  pool: 5
+  timeout: 5000
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  adapter: sqlite3
+  database: db/test.sqlite3
+  pool: 5
+  timeout: 5000
+
+production:
+  adapter: sqlite3
+  database: db/production.sqlite3
+  pool: 5
+  timeout: 5000

data/spec/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the rails application
+require File.expand_path('../application', __FILE__)
+
+# Initialize the rails application
+Dummy::Application.initialize!

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,30 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # In the development environment your application's code is reloaded on
+  # every request.  This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Log error messages when you accidentally call methods on nil.
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger
+  config.active_support.deprecation = :log
+
+  # Only use best-standards-support built into browsers
+  config.action_dispatch.best_standards_support = :builtin
+
+  # Do not compress assets
+  config.assets.compress = false
+
+  # Expands the lines which load the assets
+  config.assets.debug = true
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,60 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # Code is not reloaded between requests
+  config.cache_classes = true
+
+  # Full error reports are disabled and caching is turned on
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this)
+  config.serve_static_assets = false
+
+  # Compress JavaScripts and CSS
+  config.assets.compress = true
+
+  # Don't fallback to assets pipeline if a precompiled asset is missed
+  config.assets.compile = false
+
+  # Generate digests for assets URLs
+  config.assets.digest = true
+
+  # Defaults to Rails.root.join("public/assets")
+  # config.assets.manifest = YOUR_PATH
+
+  # Specifies the header that your server uses for sending files
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # See everything in the log (default is :info)
+  # config.log_level = :debug
+
+  # Use a different logger for distributed setups
+  # config.logger = SyslogLogger.new
+
+  # Use a different cache store in production
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Precompile additional assets (application.js, application.css, and all non-JS/CSS are already added)
+  # config.assets.precompile += %w( search.js )
+
+  # Disable delivery errors, bad email addresses will be ignored
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable threaded mode
+  # config.threadsafe!
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation can not be found)
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners
+  config.active_support.deprecation = :notify
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,42 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # The test environment is used exclusively to run your application's
+  # test suite.  You never need to work with it otherwise.  Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs.  Don't rely on the data there!
+  config.cache_classes = true
+
+  # Configure static asset server for tests with Cache-Control for performance
+  config.serve_static_assets = true
+  config.static_cache_control = "public, max-age=3600"
+
+  # Log error messages when you accidentally call methods on nil
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment
+  config.action_controller.allow_forgery_protection    = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Use SQL instead of Active Record's schema dumper when creating the test database.
+  # This is necessary if your schema can't be completely dumped by the schema dumper,
+  # like if you have constraints or database-specific column types
+  # config.active_record.schema_format = :sql
+
+  # Print deprecation notices to the stderr
+  config.active_support.deprecation = :stderr
+
+  # Allow pass debug_assets=true as a query parameter to load pages with unpackaged assets
+  config.assets.allow_debugging = true
+end